bandsaws cutting capabilities 1. shearing is a metal fabricating process used to cut straight lines...
DESCRIPTION
Water Jet Waterjet cutting is often used during fabrication of machine parts. It is the preferred method when the materials being cut are sensitive to the high temperatures generated by other methods. 3 CNC CUTTING CUTTING CAPABILITIESTRANSCRIPT
BANDSAWSCUTTING CAPABILITIES
1
Shearing is a metal fabricating process used to cut straight lines on flat metal stock. During the shearing process, an upper blade and a lower blade are forced past each other with the space between them determined by a required offset. Normally, one of the blades remains stationary.
The shearing process characteristics include:
Its ability to make straight-line cuts on flat sheet stock Metal placement between an upper and lower shear blades Its trademark production of burred and slightly deformed metal edges Its ability to cut relatively small lengths of material at any time since the shearing blades can be mounted at an angle to reduce the necessary shearing force required.
2
SHEARINGCUTTING CAPABILITIES
Water Jet
Waterjet cutting is often used during fabrication of machine parts. It is the preferred method when the materials being cut are sensitive to the high temperatures generated by other methods.
3
CNC CUTTINGCUTTING CAPABILITIES
Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut by this process include Carbon steel, Stainless Steel and Aluminum
4
CNC CUTTINGCUTTING CAPABILITIES
Plasma
The oxyfuel process is the most widely applied industrial thermal cutting processbecause it can cut thicknesses from 0.5mm to 250mmCNC CUTTING
CUTTING CAPABILITIES
5
OxyFuel
A brake press, is a machine tool for bending sheet and plate material, most commonly sheet metal It forms predetermined bends by clamping the workpiece between a matching punch and die.
PRESS BRAKE SHAPING CAPABILITIES
6
A shaper is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical
7
MECHANICAL SHAPERSSHAPING CAPABILITIES
Curving of shaped steel sections and flat plateAngles, pipe, square tubes, I beams, channelsSHAPING CAPABILITIES
8
Lathe WorkSheet metal notchingPipe NotchingPlate Bevalling
Lathe Work
Sheet metal notching
Plate Bevalling
Pipe Notching
MACHINING AND SMALL FABRICATION CAPABILITIES
9
Heavy Steel DrillingMilling vertical / horizontalPunchingNotchingShearing
MACHINING AND HEAVY FABRICATION CAPABILITIES
10
SPECIFIC FABRICATIONS
11
Curtain Wall and Cladding Support Brackets.
Custom Flanges
SAMPLE FABRICATIONS
12
SAMPLE FABRICATIONS
13
SAMPLE FABRICATIONS
14
SAMPLE FABRICATIONS
15
FastCAM® Shape Cutting for Plate
FastNEST® True Shape Nesting for PlateFastPLOT™ NC Code Simulation
3D Modelling
Bandsaw Cutting Plan
16
SOFTWARE ASSISTANCE
MVD Bending CNC Software