banked curves ch 7 and 8
DESCRIPTION
Banked Curves Ch 7 and 8. Banked Curves. If the curve is banked at an angle, then the normal force can provide the centripetal force needed to make the turn. What happens to mass?. Coin Drop, 30 sec video. http://www.youtube.com/watch?v=3zhjXvJSib8&safety_mode=true&persist_safety_mode=1. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/1.jpg)
Banked Curves
Ch 7 and 8
![Page 2: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/2.jpg)
Banked CurvesIf the curve is banked at an angle, then the normal force can provide the centripetal force needed to make the turn.
What happens to mass?
![Page 3: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/3.jpg)
Coin Drop, 30 sec video
http://www.youtube.com/watch?v=3zhjXvJSib8&safety_mode=true&persist_safety_mode=1
![Page 4: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/4.jpg)
The Daytona 500 is the major event of the NASCAR season. It is held at the Daytona International Speedway in Daytona, Florida. The turns in this oval track have a maximum radius (at the top) of r = 316 m and are banked steeply, with = 31o. Suppose these maximum radius turns were frictionless. At what speed would the cars have to travel around them?
Example
Banked Curves
![Page 5: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/5.jpg)
The Daytona 500 is the major event of the NASCAR season. It is held at the Daytona International Speedway in Daytona, Florida. The turns in this oval track have a maximum radius (at the top) of r = 316 m and are banked steeply, with = 31o. Suppose these maximum radius turns were frictionless. At what speed would the cars have to travel around them?
Example
Banked Curves
tan = v2 rg
v = 43 m/s
Since no friction is available to provide the centripetal force, the horizontal component of the normal force must provide it.
![Page 6: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/6.jpg)
Draw this table into your notes. Allow a few spare lines at the bottom.Everyone stand and give a potential answer.
![Page 7: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/7.jpg)
Draw this table into your notes. Allow a few spare lines at the bottom.
![Page 8: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/8.jpg)
Question
• If I have an object moving in a circle, what is the kinetic energy? (List Eqn.)
![Page 9: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/9.jpg)
Question
• If I have an object moving in a circle, what is the kinetic energy?
• It's ½ mv2
![Page 10: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/10.jpg)
Question
• If I have an object moving in a circle, what is the kinetic energy?
• It's ½ mv2
• Since v = rω
KE=1/2 mr2ω2
![Page 11: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/11.jpg)
Inertia, I, New Symbol• Moment of Inertia: I, is an objects resistance
to change in rotational motion.
I = mr2 in kg m2.
(from Newton’s 1st law.)
For a particle some distance from the pivot point.
• It is the rotational equivalent of mass. • An object rotating tends to stay rotating and an
object not rotating tends to stay not rotating until acted upon by an outside torque.
![Page 12: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/12.jpg)
Inertia, I, New Symbol• Moment of Inertia: I, is an objects resistance to
change in rotational motion.
I = mr2 in kg m2.
Mass is a resistance to change in motion (comapre earth globe to classroom wall.)
• An object rotating tends to stay rotating and an object not rotating tends to stay not rotating until acted upon by an outside torque.
• An object in motion tends to stay in motion and an object at rest tends to stay at rest until acted upon by an outside force.
![Page 13: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/13.jpg)
22122
2122
21 ImrmrKE
22212
21 mrmvKE
rv
• Remember KE = ½ mv2,
• “ω” replaces v
• “I” replaces m
221 IKE
![Page 14: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/14.jpg)
![Page 15: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/15.jpg)
Calculating Moment of Inertia
• For a system of more than one mass:
• Inet
= I1 + I
2 + I
3 …
• Inet
=m1r
12 + m
2r
22 + m
3r
32 ...
![Page 16: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/16.jpg)
Calculating Moment of Inertia
• For a solid object it's more complicated.
• You have to break the object up into tiny little bits, calculate the mass and radius of each and add up the moments of inertia of each one.
![Page 17: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/17.jpg)
Calculating Moment of Inertia
• For a solid object it's more complicated.
• You have to break the object up into tiny little bits, calculate the mass and radius of each and add up the moments of inertia of each one.
• Calculus: volume integral
![Page 18: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/18.jpg)
Calculating Moment of Inertia
• For a solid object it's more complicated.
• You have to break the object up into tiny little bits, calculate the mass and radius of each and add up the moments of inertia of each one. (Calculus: volume integral)
• Or just look it up in a table.
![Page 19: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/19.jpg)
• Your text book, Bing, and wikipedia all have good tables of moments of inertia. Do not take the time to memorize any of them
![Page 20: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/20.jpg)
Question
What is the moment of inertia of an ordinary dice cube?
Mass = 1.5 g
Side length = 1 cm
![Page 21: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/21.jpg)
Wikipedia sez:
![Page 22: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/22.jpg)
Question
What is the moment of inertia of an ordinary dice cube?
Mass = 1.5 g = .0015 kg
Side length = 1 cm = .01 m
I = ms2/6
![Page 23: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/23.jpg)
Question
What is the moment of inertia of an ordinary dice cube?
Mass = 1.5 g = .0015 kg
Side length = 1 cm = .01 m
I = ms2/6
I = .0015 kg (.01m)2 / 6
I = 2.5 * 10 -8 kgm2
![Page 24: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/24.jpg)
What causes acceleration?
Linear acceleration is caused by force.
Angular acceleration is caused by “Torque”.
This mean force and torque are analagous.
![Page 25: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/25.jpg)
New Symbol“” Greek Lowercase “Tau”
Stands for Torque
just like F = ma)Torque is like force: F
Moment of Inertia (I) is like mass: m
Angular acceleration (is like linear acceleration: a
Torque = the amount of angular acceleration a force causes. (how much a force makes something rotate.)
![Page 26: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/26.jpg)
Calculating Torque
The equation relating torque and force is:
r x F
It is the “cross product” of force and radius.
Cross Product uses sine and right hand rule.
a x b = |a| |b| sinθ where a and b are vectors.
Radius is the vector from the pivot point “line of action”
Line of action is the line along which the force acts. http://en.wikipedia.org/wiki/File:Right_hand_rule_cross_product.svg
![Page 27: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/27.jpg)
Two variables that affect Torque
First is angle force is applied.
2nd we will discuss is distance force is applied.
The question, how do angle and distance affect torque?
![Page 28: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/28.jpg)
How does angle affect torque?The angle you apply the force at changes
the distance to the “line of action.”
Which force will be best for opening the door?
(Draw theta angles and force causing torque.)
![Page 29: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/29.jpg)
How does angle affect torque?Which force will be best for opening the
door? ANS: 90Deg has most torque.
![Page 30: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/30.jpg)
![Page 31: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/31.jpg)
From Mr. Burkholder
or F d sin θ
F = force, D = distance force is applied,
θ is the angle between the Force and direction of Torque Motion.
θd = distance
![Page 32: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/32.jpg)
Examples of ThetaTheta’s for the different angles of force.
What is the torque for each drawing?
(Draw theta angles and force causing torque.)
![Page 33: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/33.jpg)
Torque with a knife,Chopping Nuts
Hand pushing down
Hand pushing down
Hand pushing down
Which is easiest to cut?
Fixed hand,Creates axis of rotation
(Use door stop at different distances as demo.)
![Page 34: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/34.jpg)
Torque with a knife
Hand pushing down
Hand pushing down
Hand pushing downWhich is easiest to cut?
![Page 35: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/35.jpg)
How does Distance affect torque?
A door is a device that works when you apply torque to it. Which force will get the door opened the fastest?
![Page 36: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/36.jpg)
Please Note: Torque is not Work, even though they have
the same units.Work is the dot
product of force and displacement.
It is a scalar
Torque is the cross product of force and radius.
It is a vector.
What is the direction of the vector???
![Page 37: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/37.jpg)
Torque as a vector.
2nd right hand rule:1) Line your fingers up with the radius vector.
2) Curl your fingers along the α the force would cause.
Your thumb points in the same direction as the torque.
The direction of the
Torque matches the
Direction of from
The 1st right hand rule
![Page 38: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/38.jpg)
2 equations
What does ΣF equal?
![Page 39: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/39.jpg)
2 equations
What does ΣF equal?
Newton’s 2nd
F = ma
![Page 40: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/40.jpg)
Solve problems with 2 sums.Remember,
Σ F = ma
So, Σ τ = Iα From Newton’s laws, there can only be an angular acceleration when there is a net tau.
And when STATIC (No accelerations)
Σ F = 0 (Linear Motion)
So, Σ τ = 0 (Rotation)
![Page 41: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/41.jpg)
Solve problems with 2 sums.
How many axis do rocket scientist work with?
So how many problems do they solve?
![Page 42: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/42.jpg)
Solve problems with 2 sums.
How many axis do rocket scientist work with?
x, y, z
So how many problems do they solve?
x2 for force and torque = 6 problems
![Page 43: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/43.jpg)
Solve problems with 2 sums.How many axis do rocket scientist work with?
x, y, z
So how many problems do they solve?
x2 for force and torque = 6 problems
Apollo astronauts did this in their heads!!!!!
No room sized computers in the capsule.
And they did them very fast. VERY SMART!
![Page 44: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/44.jpg)
Example A Diving Board
A woman whose weight is 530 N is poised at the right end of a diving boardwith length 3.90 m. The board hasnegligible weight and is supported bya fulcrum 1.40 m away from the leftend.
Find the forces that the bolt and the fulcrum exert on the board.
Add to WOD torque:Direction of torque. Positive = CCWNegative = CW
![Page 45: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/45.jpg)
Example A Diving Board
A woman whose weight is 530 N is poised at the right end of a diving boardwith length 3.90 m. The board hasnegligible weight and is supported bya fulcrum 1.40 m away from the leftend.
Find the forces that the bolt and the fulcrum exert on the board.
Axis of rotation is your frame of referenceAnd can be selected anywhere. Pick itSo that one radius will be zero for easierMath work.
![Page 46: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/46.jpg)
Example A Diving Board
Axis of rotation is your frame of referenceAnd can be selected anywhere. Pick itSo that one radius will be zero for easierMath work.
How many forces do we have?
How many torques do we have?
![Page 47: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/47.jpg)
Example A Diving Board
Axis of rotation is your frame of referenceAnd can be selected anywhere. Pick itSo that one radius will be zero for easierMath work.
How many forces do we have? 3How many torques do we have?3
If we pick the axis of rotation on a force, Then 1 torque will go away because r = 0.
![Page 48: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/48.jpg)
0 WWbb rWrF
N 946
m 1.40
m 50.2N 530bF
b
WW
r
rWFb
Fb = Force from bolt, Ww = Force from Woman’s weight, r = radius(note: book moved axisTo middle, but not needed.)
![Page 49: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/49.jpg)
0 WFFF fby
0N 530 N 946 f F
N 1476fF
Make sure the signs of the torque and forces are correct.
![Page 50: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/50.jpg)
Question
Will there be a net torque on this object?
What is the net force? Where is the line of action?
![Page 51: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/51.jpg)
DEFINITION OF CENTER OF GRAVITY
The “center of gravity” is the “average position” ofa solid object.
You can treat gravity like a force going through the center of gravity.
For a rectangular solid, cube, cylinder or sphere it is thegeometric center of the object.
Show some samples. Have students stick their arms out and feel where their arm’s cg is.
![Page 52: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/52.jpg)
Example Fighting a Fire8.00-m ladder of weight WL = 355 N leans against a
smooth vertical wall with an angle of 50 degrees above the horizontal. A firefighter, whose weight is WF = 875 N, stands
6.30 m from the bottom of the ladder. Assume that the ladder’s weight acts at the ladder’s center and neglect the hose’s weight. Find the forces that the wall and the ground exert on the ladder.
![Page 53: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/53.jpg)
Strategy
Net force and net torque have to both equal zero.
Start with forces:Weight of ladder and weight of firefighter have
to be counteracted by the ground pushing up on the ladder so:
0 = Fground + Wladder + Wfirefighter
0 = Fground - 355N - 875 N
Fground = 1230 N
![Page 54: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/54.jpg)
Pick Axis as Bottom of ladder. Why bottom?
Ladder torque = Weight x radius
= -355N * 4m * cos 50
= -912 Nm into the board
Firefighter torque = Weight * radius
= -875 N * 6.3 m * cos50
= -3543 Nm into the board
We need to balance the two of these with
the torque from the wall.
So Στ = τwall - τladder – τfireman = 0
So τwall = 912 + 3543 = 4455
Wall torque = 4455 Nm= F x radius
4455 Nm = F x 8 m gives that F = 557 N This looks incomplete to me. My correction on next slide.-Mr
Burkholder
![Page 55: Banked Curves Ch 7 and 8](https://reader031.vdocument.in/reader031/viewer/2022020716/56812a93550346895d8e40f3/html5/thumbnails/55.jpg)
Wall torque = 4455 Nm= FW x radius
4455 Nm = FW x 8 m
FW = 557 N
But FW is not P because of the angle with the wall.
FW = P Cos θ
P = FW / Cos 40
P = 557 N / Cos 40
P = 727 N
If only 557N of the wall push of 727
Goes counter’s the ladders rotation
(pushes as torque), where does the rest
Of the walls force go?
Is it arthimetic? No, must use cos and sin.
FW