Bari Rehab Platform 2™Quick Reference Guide

This card is not meant to replace product user manual. For complete manual, contact Sizewise.

800-814-9389 sizewise.com

Shown with optional Power Drive

Components

Side Rail Instructions

Slide rail into top deck Install lock pin

To remove, pull out pin and lift rail straight up

Adjusting Side Rail

Push to adjust rail Position side rail

To adjust, push knob while placing rail in desired position

Three-position side rail: Up, 45°, or Down

Head Board

Head Angle Indicator

TrendelenburgOn/Off

MainPower

Adjustable Side Rail Scale Meter

Info Pocket

Foot Board

Emergency Hand Crank

Accessory Bar

Brake and Steer Casters Side Bumper

Troubleshooting

Casters

Lever Swivel point

Head and Foot casters lock and swivel

— To engage, press lever down

— To disengage, raise lever

If Bed fails to function:

1. Verify power cord is properly plugged in

2. Verify main power switch is turned on

3. Verify hand control is plugged into control module at head of bed

4. Verify power source

5. For further assistance, call 800-814-9389

— Raise foot section to gatch knees

— Raise head section

— Put bed in Reverse Trend

Bed Positioning(Engage Brake Casters before operating bed)

Lever

Expanding/Retracting Bed Deck

Emergency Hand Crank

sizewise.com 800-814-9389

OPS-0028-1217 27650004 Rev. 4.0

Position knob to UNLOCK while pulling out/pushing in section

Located under foot section, mounted to motor box cover.

— Remove crank and insert into desired function. Crank either clockwise or counterclockwise to operate. Bed functions located at both foot and head section of bed.

Expanded deck view

Expand/Retract all sections on both sides to 48”/39” width

Retracted deck view

— Foot section: up/down knees, up/down bed (head or foot end)

— Head section: up/down head, up/down bed (head or foot end)