6 hrs

3 pcs

f

0.20 mm

k

0.40 mm

h

PETPLA

86 g

d

MK3/S

Summary

This is a custom box with a Batman logo on the top. It's size is designed totight fit a TP-Link M7350 Mobile Wi-Fi device with a 1.7mm foam around it.

It has three parts: the bottom, the top and the logo. Print the bottom andthe top with black and the logo with yellow filament. You can even havethe box without printing the logo, the Batman logo in black only looks coolas well :)

Use 3×2 (3mm diameter, 2mm tall) magnets to fit the bottom and the topparts to each other.

Use CA glue to fix the logo into the top.

Hobby & Makers > Organizers

box batman

Print with 0.2 mm layer height, without support. Rotate the top and thelogo in your slicer to print them upside down.

György Balássy

Batman Box

VIEW IN BROWSER

updated 26. 10. 2019 | published 26. 10. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

165.0 KB

0.08 hrs f 0.20 mm k 0.40 mm h PLA 0.70 g d MK3/S

updated 26. 10. 2019

2.0 MB

2.65 hrs f 0.20 mm k 0.40 mm h PET 40.00 g d MK3/S

updated 26. 10. 2019

1.6 MB

2.79 hrs f 0.20 mm k 0.40 mm h PET 45.40 g d MK3/S

updated 26. 10. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

149.3 KBupdated 26. 10. 2019

42.5 KBupdated 26. 10. 2019

216.4 KBupdated 26. 10. 2019

738.2 KBupdated 26. 10. 2019

batman-box-logo-v24_02mm_prusapla_mk3s_5m.gcode

batman-box-top-v24_02mm_prusamentpetg_mk3s_2h39.gc

batman-box-bottom-v24_02mm_prusamentpetg_mk3s_2.g

batman-box-top-v24.stl

batman-box-bottom-v24.stl

batman-box-logo-v24.stl

batman-box-v24.f3d

483.9 KBupdated 26. 10. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

batman-box-v24.step