BATTERIES

5-2

Replacement BatteRiesThese batteries are not the same size as stock batteriesand will require shimming on certain applications. On partE1612 for ‘97-up Dressers, the battery must be mounted onit’s side and will require longer battery cables. e1610 ‘86-up Softail®, ‘91-up Dyna Glide®, ‘82-94 FXR, ‘79-up XL, ‘71-up FX Electric Start 230 ccae1611 ‘80-96 FLT, FLHT, Road King® 280 ccae1612 ‘97-up FLH, FLHT Road King® 470 cca

metal casing providessuperior vibration resistance

no need to boost charge, add water or clean terminals before installing.

longeR stoRage life The Odyssey Battery willmaintain up to 50% state of charge after 2 years if stored at room temperature.

e1610

e1611

e1612

e1671

e1674e1670

e1672

e1673

odyssey® BatteRiesThese batteries are worry free. The sealed design of the Odyssey® battery eliminates the need for vent tubes. No routine maintenance is required and there is no more fear of acid burns or damage to expensive chrome or paint.WaRRanty: 2 years, If the battery is determined to be defective for material or workmanship under manufacturers warranty, it will be replaced.

am-plUs Replacement BatteRiesWin# Repl. oem V/a applicatione1676 65989-90a 12/19 91-up Softail® & Dyna Glide®

e1670 66006-70 12/7 All ‘70-78 XL & FX with kickstart 12N7-4Ae1671 65991-75c

65991-8212/19 ‘79-up XL, ‘77-78 XLCR, ‘73-86 FX electric

‘82-up FXR, ‘84-90 Softail® YB-16Be1672 66010-82 12/20 ‘80-up FLT/HT & FLHS 5-speeds Y50-N18Le1673 66006-65a 12/32 ‘67-78 XL except XLCR electric, ‘65-84 FL/H

4-speeds H-12e1674 12/5.5 Custom: ‘37-64 FL horseshoe oil bags

12N5.5A-3BThese batteries are not shipped with acid. Battery acid is sold separately and is available at your local auto parts store.

BATTERIES INTERSTATE BATTERIES

5-3

foR haRley-daVidson®

1450 fxd seRies (dyna) ‘99-06 ytx20hl-Bsfxst, flst seRies (softail) ‘00-06 ytx20hl-Bsfl, flh seRies (toURing) ‘00-06 yB30l-Bfl, flh seRies (toURing) ‘99 yB30l-B

1340 fxd/fxst seRies (dyna) ‘97-99 ytx20hl-Bsfxd/fxst seRies (dyna) ‘91-96 ytx20hl-Bs c

fx/fxR seRies ‘79-94 ytx20h-Bs *fxR seRies ‘99-00 ytx20h-Bs *flst seRies (softail) ‘97-99 ytx20hl-Bsflst seRies (softail) ‘91-96 ytx20hl-Bs c

fxst/flst seRies (softail) ‘84-90 ytx20h-Bs *fl, flh seRies (toURing) ‘80-96 ytx24hl-Bs *fl, flh seRies (toURing) ‘97-98 yB30l-Bfl, flh seRies (toURing) ‘78-84 yhd-12

1200 xl, xlh (spoRtsteR) ‘04-06 yhd-12xl, xlh (spoRtsteR) ‘97-03 ytx20hl-Bsxl, xlh (spoRtsteR) ‘87-96 ytx20h-Bs * fx seRies (electRic staRt) ‘71-78 ytx20h-Bs *fx seRies (KicK staRt) ‘71-72 yB7-afl/flh seRies (toURing) ‘65-77 yhd-12

1130 VRsc V-Rod ‘02-06 ytx14-Bs1100 xl seRies (spoRtsteR) ‘87-93 ytx20h-Bs *1000 xl seRies (spoRtsteR) ‘79-85 ytx20h-Bs *

xlch seRies (spoRtsteR) ‘70-78 yB7-axlcR cafe RaceR ‘77-78 ytx20h-Bs *xlh (spoRtsteR) ‘67-78 yhd-12xlx-61, xR1000 ‘83-85 ytx20-Bs *

883 xl, xlh (spoRtsteR) ‘04-06 ytx14ahl-Bsxl, xlh (spoRtsteR) ‘97-03 ytx20hl-Bsxlh (spoRtsteR) ‘86-96 ytx20h-Bs *

500 mt500 (militaRy) all yeaRs ytx14ahl-Bs

foR BUell®

1200 s1 lightning ‘96-99 ytx14-BsxB12R fiReBolt, xB12s lightning

‘04-06 ytx14-Bs

984 xB9R fiReBolt, xB9s lightning

‘00-06 ytx14-Bs

500 Blast ‘00-06 ytx14-Bs

Cycle-Tron Batteries Are:• Fully charged & ready-to-use!• Absobed Glass Mat (AGM) Technology• Sealed, Maintenance free - No water to check• Worry free - Non spillable & leak proof

* Indicates a Cycle-Tron Battery

paRt#

high peRf.sealed

maint. fRee

sealedmaint. fRee

high peRfoRmanceconVentional conVentional

Replaces oem #

c.c.a.@ 0˚f

dimensionsl W h

teRminal placement

e1677 ytx20h-Bs* 69991-82B 310 6 7/8” 3 7/16” 6 1/8”

e1679 ytx20hl-Bs* 65989-97a 310 6 7/8” 3 7/16” 6 1/8”

e1680 ytx14ahl-Bs* 65958-04 200 5 5/16” 3 1/2” 6 9/16”

e1682 ytx14-Bs* 65948-00 200 6” 3 7/16” 5 3/4”

e1687 yB30l-B 66010-97a 300 6 9/16” 5” 6 7/8”

e1689 yhd-12 66007-84 240 8 1/8” 5 1/4” 6 1/2”

e1702 yB7-a 66006-70 124 5 5/16” 3” 5 1/4”

+ -

+ -

+-

+-

+-

+ -+ -

note:inteRstate BatteRies aRe only aVailaBle foR local dealeRs on Will call picK Up.

BATTERY SIDE COVERS, TOPS & STRAPS

5-4

chRome BatteRyside coVeRs foR spoRtsteR®

e1675 ‘67-78 XL electric start Repl. oem 66076-84e3630 FX-XL ‘70-78 kickstart models. Repl. oem 66072-83

e3640 ‘73-86 FX 4-speed electric start except Softail®, ‘82-up XL electric start Repl. oem 60070-83

BatteRy Bottom plateo3010 ‘36-64 Big Twin Repl. oem 62575-36

RUBBeR BatteRy stRape1688 ‘80-97 FLT, FLHT, FLHS 5 speed, ‘84-93 Softail® ‘77-78 XLCR, ‘79 XL Repl. oem 66105-77

e3600 ‘65-78 FX & XL kickstart only Repl. oem 66369-70

e3610 ‘65-84 FL, FLH 4 speed only Repl. oem 66370-65

e3620 ‘73-86 4 speed FX electric start except Softails® Repl. oem 66376-73

e1678 ‘67-78 XL electric start Repl. oem 66369-67

chRome BatteRy top coVeRs

e1683 ‘67-78 XL electric start Repl. oem 66470-67e1684 ‘70-78 XL/FX kick start Repl. oem 66470-70

e1685 ‘73-86 FX 4-speed except Softail®, ‘82-up XL, Repl. oem 66476-73e1686 ‘70-84 FL, Repl. oem 66383-70

stainless steel hold-doWn stRaps

BatteRy cUshione1681 ‘85-up Softails®

chRome BatteRy side coVeRfoR softail®

Cover slips over the top of your battery on all ‘84-90 Softail® models.e3631 Battery side cover

chRome BatteRy side coVeR foR 4 speed fl’sCover for FL models from 1970-84. e3660 Battery side cover Repl. oem 66074-83

e1675 e3630

e3640

e3660

e3631

BATTERY CHARGERS

5-5

sUpeRsmaRt™ BatteRy tendeR®This 1.25 amp charger constantly monitors battery to keep it in peak condition at all times. Unlike a trickle charger which can boil dry or over charge a battery, the battery tender automatically converts to float charging mode after the battery is brought to a full charge. At that point the current drops to 10 milli-amps virtually no current and the voltage to 13.2. The Battery Tender will charge as fast or faster than any 3 amp charger on the market and can remain connected to your battery for unlimited amounts of time with no fear of boiling or overcharging. Comes with quick-connect harness for hard to reach areas. The harness is also available separately for multiple charging applications: simply keep a harness attached to the batteries of multiple bikes and one Battery Tender can be quickly connected from bike to bike and also works for gel batteries. B3000 Battery TenderB3001 Quick-Connect harness

BatteRy tendeR® foR odyssey BatteRiesA new technologically advanced battery charging system, originally designed to replace the old bulky inefficient chargers used in the golf cart industry, is quickly finding wide acceptance in the industrial market. Available in many frequently used voltage and amperage variations. This compact on board charger is designed to fully charge a battery and maintain it at a proper storage voltage without the damaging effects that can be caused by a trickle charger. Easy to use and will fit in most tight places for your convenience. Weighs only 21 ozs. and measures 5” L X 4½” W X 2” H. Comes with a 2 year warranty. Other features include:

B3002 Battery Tender • Advanced Microprocessor Circuitry that correctly charges any type of lead acid, sealed maintenance free or gel-cell battery • Charges any size capacity lead acid battery • Reverse polarity protection and water repellent circuitry • Complete three step charging program, Bulk charge, Absorption mode, and Float mode

BatteRy tendeR® jUnioR• Fully automatic two-stage lead-acid battery charger• Lightweight, compact size is ideal for those hard to reach spots• Trickle charger ensures batteries are maintained after charging and always ready to go• Ideal for all lead-acid, sealed maintenance free and gel cell batteries• On 12V models after full 14.4DC charge is reached, converts to float charger and monitors battery at 13.2V. When voltage drops below 12.6VDC, charger resumes charging back to 14.4VDC• On 6V models after full 7.2VDC charge is reached, converts to float charger and monitors battery at 6.6V. When voltage drops below 6.3VDC, charger resumes charging back to 7.2VDC• Two color LED indicator• Spark proof• Reverse polarity protected• 12’ output cord and quick connect harness

B3003 12V Battery Tender JuniorB3004 6V Battery Tender Junior

BATTERY ACCESSORIES

5-6

dyna Volt monitoRA necessity for any battery ignition vehicle that does not have a charging system such as race vehicles. The Voltage Monitor gives a clear indication of battery condition with a quick glance at the three indicator LED. Works on any vehicle with a 12v battery system.e1736 Dyna Voltage Monitor

dyna chaRge monitoRTrouble shoot your charging system with a quick glance at the LED lights. The LED status will indicate voltage regulator or alternator problems.e1735 Dyna Charge Monitor

chRome ignition coil12 volt ignition coil completewith bracket and wires. 2 lead. Will not work with electronic ignitions.e3380 Ignition coil

spyKe BatteRy caBle Kitse2607 ‘89-up FXST, FLSTe2606 ‘84-’88 FXST , FLSTe2608 ‘89-’94, ‘99-’00 FXRe2609 Universal battery cable kit

accel® Replacement BatteRy caBlese2600 ‘65-up FL battery ground strap. Length 8”. Repl. oem 70209-65a e2610 ‘65-E82 XL, ‘82-E85 FXR battery pos. to solenoid, ‘82-E85 FXRT battery neg 65-up FL pre-83 positive to starter relay, ‘71-E83 FX/WG pre E83 electric start solenoid to starter & battery. Length 11”. Repl. oem 70097-75e2620 ‘67-E75 & ‘82-up XL, L65-up FL, ‘75-up FX battery grnd strap. Length 15”. Repl. oem 70069-65ae2630 ‘67-78 XLH battery ground metal strap. 9” Length Repl. oem 70235-67a

accel® poWeR pUlse coilAccel’s Power Pulse Coil features greater available spark voltage, faster rise time, and longer spark duration than stock coils. This Accel coil is guaranteed to improve starting, mid-range throttle response, and top end performance on points-triggered 12 volt Harley®.e2400 All 12 volt points-triggered ignition XL, FL, FX

accel® sUpeR coilsThese Accel coils produce higher performance than stock ignition coils.e2660 Accel Super Coil for ‘65-79 point ignitions Repl. oem 31609-65ae2670 Accel Super Coil for ‘80-up electronic ignitions Repl. oem’s 31614-83, 31620-88 & 31609-80

IGNITION COILS

5-7

e1728

e1724e1726

ameRican made dyna coilsDyna’s high tech coils are the industry standard. American made, top quality performance coils that replace stock coils. Choose from two configurations and three variations of resistance for different applications. Dyna coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Dyna coils produce spark voltages in excess of 30,000 volts and spark energies second to none.

BlUe stReaK ignition coilBlue Streak ignition products, long considered the standard for ignition products, has designed a super fast ignition coil that features a quick rinse time for easier starts. This coil is a stand alone product that will enhance the performance of the motorcycle’s ignition system. The coil has the following benefits:• High RPM range for use with street and race applications• More spark energy than the OEM coil under full load• 45,000+ volts for maximum performance• Higher voltage eliminates spark deterioration even at high RPM• fully encapsulated for long life, will withstand extreme conditions• Vibration resistant to withstand the punishing environment• Rapid heat dissipation for long life under severe conditions• Smaller and lighter than stock but fits into stock mounting bracket• Compatible with stock and aftermarket ignitions

1980-present Big Twins with electronic ignitions 2.7 OhmsExcluding FLHTCU-I & all Twin Cam® & XL 1200’s

e6828

spyKe ignition coils• Mounts under stock covers• 80,000 volts / 3 Ohms• Works with most single fire ignitions• Extremely quick rise / fall times• fires at extremely low voltage for ease fo startinge6826 ‘80-02 Big Twin except F.I. Dual fire coile6827 ‘70-98 Big Twin, ‘72-01 XL Single fire coil

dynateK minatURe seRies coilsAdvanced magnetic core technology delivers high output in one of the smallest packages available. Great for customs where coils need to be hidden. These coils are designed for use with the Dynatek ignitions, factory installed electronics, or other aftermarket ignitions that employ dwell control.

Part# ohm Qty Outputse1923 .5 2 Duale1924 .5 1 DualE1925 .5 2 Singlee1926 .5 1 Singlee1927 3 2 Duale1928 3 1 Singlee1929 3 2 Singlee1930 3 1 Single

e1724 12v 3 ohm, angled dual output Green Pair e1725 12v 1.5 ohm, angled dual output Red Pair e1726 12v 3 ohm, angled single output Green Pair e1727 12v 1.5 ohm, straight dual output Red Eache1728 12v 3 ohm, straight dual output Green Eache1729 12v 5 ohm, straight dual output, ‘85-up electronic ignitions points Black Eache1730 12v 5 ohm, angled dual, output Black Pair e1731 12v 5 ohm, angled sing, output Black Pair

dynateK tWin fiRe ii coil• Single fire just got easier• High technology materials now make it possible to put 2 coils in the same space as the stock coil• No exposed laminations to rust & degrade performance• High voltage & primary termianls - Brass

• High impact thermoplastic housing is ultrasonically welded & sealed against moisture• Compact size easily fits under stock cover• Peak gapcurrent in excess of 50mA• Over 40,000V per output• Rated at 3 ohms: accepts 7-8mm wirese1717 Twin Fire II Miniature, dual output

IGNITION COILS & BRACKET

5-8

cRane single fiRe peRfoRmance ignition coilsThis HI-Intensity ignition coil is two coils in one. Designed for single fire ignition applications that have a current limiting feature. The coil is compact and fits under stock coil covers with no bulky extra brackets. For use with most single fire ignitions that have current limiting control and require a 2-3 ohm coil. 1970-98 and some ‘99 Big-Twin with EVO engines (Non Fuel Inj.), and ‘71-02 Sportster®.e6824 Single Fire Ignition Coil e6838 Single Fire Ignition Coil - smaller version

compU-fiRe® coilsNew generation coils with closed core design producing greater energy from a smaller package. Do not use with points or Dyna S ignitione1842 Compu-Fire® Coils single tower for single fire applications Paire1845 ‘80-02 Big Twin except F.I. Dual Fire Coil 3 ohm 45,000 volts See coil mounting bracket E1849 above

dUal fiRe coil pacKe1809 Fits 4 Speed, Dyna, Softail® frames

e6834

e6838

cRane fiReBall dUal fiRe peRfoRmance coil15% smaller, weighs 30% less than stock, and fits the stock mounting bracket.The FireBall features a precision molded plastic housing, and it is encapsulated with epoxy material for increased resistance to shock and vibration. This coil can beused with all ‘79-98 Harley-Davidson® models except late model fuel injections, and with most aftermarket systems including Accel®, Dyna, Jacobs and MSD ignitions.e6825 Dual fire performance coil

compU-fiRe® moUnting BRacKet system For use with Coil E1845 abovee1849 Fits Evolution® Sportster®, under tank mount.

compU-fiRe single fiRe coil KitsAll fit with stock cover.

e1934 1984-00 FXST e1938 Single fire left coil 2.5 ohm 100mje1935 1991-98 FXD Dyna e1939 Single fire right coil 2.5 ohm 100mje1936 1982-84 & 1999-00 FXRe1937 1984-98 FLT Touring

e6824

cRane hi-intensity dUal fiRe peRfoRmance ignition coilThis HI-Intensity ignition coil improves the output of any stock or accessory dual fire ignition system. Designed by computer to improve starting and throttle response for quick acceleration and increased fuel mileage. Fits in the stock mounting bracket in minutes with no modifications. 3 Ohm primary resistance. 1970-98 and some ‘99 Big-Twin with EVO engines (Non Fuel Inj.), and ‘71-02 Sportster®.e6834 Dual Fire Ignition Coil

COIL COVERS & BRACKETS

5-9

e3209 Coil Cover for E3205 and E3208

e3207

e3056

e3208

e3204

chRome Billet alUminUm coil coVeRThese heavy duty billet aluminum coil covers are American made & available with or without ignition switch. Will work with most coil & motor mount brackets or existing stock bracket.e3210 With ignition switch e3215 Without ignition switch

coil coVeRs & BRacKets By yanKee enginUityThese heavy duty billet aluminum coil brackets by Yankee Engineuity are American made and available for single or dual coil configurations. Available in polished billet aluminum and corrosion resistant black anodized finish. Can be used with stock configured coils or end mount style Dyna & Andrews. Note: Won’t accept factory coil covers.

chRome Billet coil coVeRse3051 For single Nology coil or 1 Compu-Fire closed core dual fire onlye3052 For dual Nology coils ‘80-99 80” OEM coil, Crane single fire coil ‘80-99,

Accel super coil, MC Power Pak coil, Dyna twin fire coil and new Spyke coil e3053 For dual Compu-Fire closed core coilse3054 For dual Dyna coils

polished Billet coil BRacKetsPolished Black Mount Applicatione3064 ——— Dual Nology and Compu-Firee3056 ——— Dual ‘86-up Softail® with Dyna or Andrews coile3058 e3208 Dual ‘91-up Dyna Glide® with Dyna , Andrews or Accel

end mount coil——— e3207 Dual ‘82-up XL with Dyna or Andrews coile3055 e3204 Dual ‘82-up FXR with Dyna or Andrews coile3057 ——— Single ‘82-up FXR with Dyna or Andrews coile3059 ——— Single Crane Single Fire, MC Power Pak, 1980-up OEMe3061 ——— Single Dynatech and Spyke coile3062 ——— Single Single Compu-Firee3063 ——— Single 1999-up OEM coil single fire coil

polished Billet adapteR BRacKetse3065 Coil bracket adapter for use with motor mounts page 9-58 & 9-59e3066 Horn bracket for use with motor mounts page 9-58 & 9-59e3067 Motor mount key switche3068 Long choke knobe3069 Short choke knob

e3053

e3051

e3052

e3210

e3215 See pages 9-58, 59 for motor mounts

See pages 9-58, 59 for motor mounts

COIL COVERS & BRACKET

5-10

chRome coil moUnting BRacKete1645 ‘48-up FL, FX models. Repl. oem 31728-78

stainless steel coil end cap setThese stainless steel coil end caps fit ‘84-up Big Twins and Sportster® late style coil. They hold on with double side adhesive tape. Sold pairs.e3221 Coil End Caps

speed Ball coil coVeR By legendsInstalls over stock coil coverp5026 All Softail® & 4 speed Big Twins

5-11

chRome fxR style coVeRe3200 ‘82-up FXR Repl. oem 31625-82

chRome nostalgia style coVeRs e1647 ‘65-86 FL/FX, ‘65-86 4 Speed Big Twinse1648 ‘84-up Softail®

chRome coil coVeRe3050 ‘65-up 4 speed Big Twin & ‘84-up Softails® Repl. oem 31606-65ta

COIL COVERS

SPARK PLuGS

5-12

chRome spaRK plUg holdeRFits all Big Twin and Sportster® frames. Holds two spare spark plugs, completely chromed including mounting hardware.e3700 Plug holder Repl. oem 91775-51

champion® 24 pacKConvenient 24 pack of the best selling champion plug RN12YC sold each as E2880. Plugs fit all ‘84-up EVO, all Shovels ‘75-81e2887 Service Shop Pack

champion® coppeR plUs ™ spaRK plUgsA center electrode of pure copper inside of chrome nickel is contained in a longer insulator nose & transfers heat between firings to help resist fouling. Sold each.

champion® 12mm 24 pacKConvenient 24 pack of 12mm champion plug. Plugs fit Evolution® Twin Cam® and Sportster®.e2889 Service Shop Pack RA8HC Repl. oem 32317-86

fiRedomes By KüRyaKynSimply slide them on and in seconds your plugs are show chromed. Specially designed silicone seal holds them firmly in place. Will not fit Accel plugs E2950 or E2927 due to 18mm hex on these plugs. Sold in pairs.e3812 Standard 13/16” plugse3813 Evo XL 11/16” also fits some 4 plug heads & most 5/8”

spaRKiesLight up the night with these redesigned glow plug covers that fit all spark plugs with screw-off connector caps. Use with point ignition only. Not recommended for electronic ignition. Sold in pairse3710 Cleare3720 Rede3730 Bluee3740 Amber

Part# Copper Plus for Models: Gap Champ.# Repl. oem

e2883 ‘99-up 1450+ Twin Cam® .040 RA8HC 32317-86

e2880 ‘84-up 1340 Evolution® .040 RN12YC 32311-83

e2881 ‘82-84 1340 Shovelhead .040 RN13LYC 32312-78A

e2880 ‘80-81 1340 Shovelhead .040 RN12YC 32311-83

e2882 L78-79 1340 Shovelhead .025 N12YC 32310-78

e2883 ‘86-up 900,1200 Evolution® .040 RA8HC 32317-86

e2880 L78-80 1200 Shovelhead .040 RN12YC 32311-83

e2880 ‘75-E78 1200 Shovelhead .025 RN12YC 32310-78

e2884 ‘48-74 1200 Big Twin .025 12YC N/A

e2883 ‘86-87 1100 Evolution® .040 RA8HC 32317-86

e2885 ‘79-85 1000 Sportster® .040 RL82YC 32301-80

e2886 ‘72-78 1000 Sportster® .030 H8C 32301-47A

e2886 ‘57-71 900 Sportster® .030 H8C 32301-47A

5-13

accel® cyclelite™ platinUm plUgsPlatinum provides longer life and durability and is able to maintain a precise gap much longer than ordinary plugs.Sold in pairs.

SPARK PLuGS

accel® U-gRooVe spaRK plUgs Accel’s unique U-groove design provides a larger spark for more complete combustion, faster starts, improved performance and reduced fouling. Sold pair.

accel® U-gRooVe These are some of Accel’s most popular plugs.Sold in 10 packs as well as each.e2977 ‘75-E78 Shovel e2975 ‘48-74 Big Twins e2976 ‘72-78 Sportster® e2920 ‘75-E78 Shovele2900 ‘48-74 Big Twinse2910 ‘72-78 Sportster®

Part# CylceLite for Model: Gap Champ.# Repl. oem

e2924 1340 Evolution® ‘84-up .040 RN12YC 32311-83

e2924 1340 Shovelhead ‘80-81 .040 RN12YC 32311-83

e2926 1340 Shovelhead L82-84 .025 N12YC 32310-78

e2924 1200 Shovelhead L79-84 .040 RN12YC 32311-83

e2923 1200 Shovelhead ‘75-79 .025 RN12YC 32310-78

e2921 1200 Big Twin ‘48-75 .025 RN12YC 32301-60

e2927 1100 XL ‘86-up .040 RA8HC 32317-86

Part# U-Groove for Models: Gap Champ.# Repl. oem

e2950 1450+ Twin Cam® ‘99-up .040 RA8HC 32317-86

e2974 1340 Evolution® ‘84-up .040 ——- 32310-77

e2930 1340 Evolution® ‘84-up .040 RN12YC 32311-83

e2960 1340 Shovelhead 82-84 .040 RN13LYC 32312-78A

e2974 1340 Shovelhead ‘80-81 .040 ——- 32310-77

e2930 1340 Shovelhead ‘80-81 .040 RN12YC 32311-83

e2973 1340 Shovelhead L78-79 .025 ——- 32309-69

e2920 1340 Shovehead L78-79 .025 N12YC 32310-78

e2950 883, 1200 Evolution® ‘86-up .040 RA8HC 32317-86

e2974 1200 Shovelhead L78-80 .040 ——- 32310-77

e2930 1200 Shovelhead L78-80 .040 RN12YC 32311-83

e2973 1200 Shovelhead ‘75-E78 .025 ——- 32309-69

e2920 1200 Shovelhead ‘75-E78 .025 RN12YC 32310-78

e2900 1200 Big Twin ‘48-74 .025 J12YC N/A

e2971 1200 Big Twin ‘48-74 .025 ——- 32301-60

e2950 1100 Evolution® ‘86-87 .040 RA8HC 32317-86

e2940 1000 Sportster® ‘79-85 .040 RL82YC 32301-80

e2970 1000 XR-1000 ‘83-85 .030 ——- 32314-83

e2910 1000 Sportster® ‘72-78 .030 H8C 32301-47A

e2972 1000 Sportster® ‘72-78 .030 ——- 32307-58

e2910 900 Sportster® ‘57-71 .030 H8C 32301-47A

e2972 900 Sportster® ‘57-71 .030 ——- 32307-58

10 Pack10 Pack10 PackEach RN12YC Repl. oem 32310-78Each J12YCEach HBC Repl. oem 32301-47a

IGNITION wIRES

5-14

accel® aRmoR shield ignition WiRe setsAccel offers Armor Shield Silicone Wire Sets in 8mm blue. Each custom set features premium silicone wire, heavy duty silicone boots, and our armor shield braid with nickel plated ferrules.

accel® 8.8 cUstom fit ignition WiRe setsAt the spark plug end, positive-locking stainless steel terminals click on to let you know that the ignition wire is locked on during installation. High dielectric strength silicone spark plug boots provide excellent insulation, preventing arcing to the cylinder head. At the coil end, high conductivity brass coil terminals and leakproof, weatherproof boots are attached to the wires to ensure perfect termination.

accel® 300+ IGnItIOn WIRE SEtS300+ Race Wires provide the peak ignition output you need for race-winning or maximum street performance. The extra thick 8.8mm silicone insulation eliminate electrical “leakage” or RFI interference that interrupts control modules. 300+ Wire delivers peak performance even at high temperatures over 550ºF. The ultra-strong Aramid core and fiberglass braiding provide resistance to vibration and wire stretch to make a wire set that is durable and reliable. The low 150 ohms/ft. resistance Ferro-Spiral™ core material delivers MAXIMUM spark energy to the spark plug without diminishing or suppressing the spark energy. 300+ Wire is available in custom fit sets that are ready for easy installation as well as universal fit sets for dual plug heads and other special applications. Accel 300+ Wire is recommended for use on points-style and electronic ignition motorcycles. Sets include easy installation instructions and a complete hardware kit. Made in the U.S.A.e2451 2000-up Twin Cam® 88 Softail® e2452 ‘91-99 Softail® e2453 ‘91-98 Dyna Glide®, ‘84-90 Softail®

‘85-86 FX, ‘71-85 Sportster® e2454 ‘99-up Dyna Glide®

e2455 ‘99-up FLT, FLHT e2456 ‘85-98 FLT, FLHT, FLHSe2457 ‘94-98 FLHRe2458 ‘86-present Evolution® Sportster® models except 1200Se2459 ‘82-00 FXR

yelloW BlacK WiRe applicatione2430 e2424 8.8 Suppression l78-84 flh, fx, fxe-80, ‘83-84 fxWg

e2440 e2425 8.8 Suppression ‘79-85 xl, xlch, xlx, ‘79-82 xls, ‘84-90 Softail® Models, ‘85-86 fXWG,‘85 fXEf, fXSB, ‘91-up Dyna models

e2450 e2426 8.8 S.S./Copp. ‘71-e78 fx, fxe, ‘65-e78 fl, flh

e2460 e2427 8.8 S.S./Copp. ‘71-e78 xlh, xlch

e2470 e2429 8.8 Suppression ‘82-up fXR, fXRS, fXRt

e2480 e2407 8.8 Suppression ‘80-84 flt, flht, flhtc,fltdc

e2490 e2431 8.8 Suppression ‘86-up XL Models Single plug EVO

e2410 e2432 8.8 Suppression ‘85-90 fLt, fLHt, fLHS Models

e2422 e2433 8.8 Suppression ‘91-up Softail® Models

e2423 e2434 8.8 Suppression ‘91-98 fLt, fLHt, fLHS, fLHR Models

paRt WiRe applicatione2500 Blue Suppression ‘65-84 fL, fLH, fLH-80, Classic,

‘71-84 All fX Models (except ‘80-82 fXWG &‘84 fXSt)

e2510 Blue Suppression ‘65-85 xl, xlh, ‘79-82 xls

e2520 Blue Suppression ‘82-present fXR, fXRS, fXRt

e2530 Blue Suppression ‘80-85 flt, fltc, flht, flhtc

e2540 Blue Suppression ‘86-up all XL models

e2590 Blue Suppression ‘79-85 xl, xlch, xlx, ‘79-82 xls, ‘84-90 Softail® Models, ‘91-up fXDB/d/s, fxdc ‘85 fxef, fxsB, ‘85-86 fxWg

IGNITION wIRES

5-15

accel® 8.8 UniVeRsal fit WiRe sete2420 2 cylinder Variangle Stainless Steel/Coppere2419 2 cylinder 90° Graphite Suppressione2834 2 cylinder Variangle Graphite Suppression

plUg WiRes setse1810 Universal V-Twin w/ single plug heads 2 wires e1811 Universal V-Twin w/ dual plug heads 4 wires

e6783 ‘80-84 FLT/FLHT/FLHTC/FLTC e6782 ‘91-up Dyna, ‘84-90 Softail®,‘85-86 FXWG, ‘79-85 FXEF, FXSB, ‘79-85 XL, XLCH, XLX e6786 ‘82-up FXR/FXRT/FXRSe6785 ‘79-82 FLH

cRane hi-poWeR ReactiVe coRe WiRe setCrane now offers the ultimate HI-Power Ignition wires. The attractive black finish with gold lettering will enhance the look on any application. The 8.5 mm silicone insulation resists temperatures up to 600° F and prevents voltage leaks. This delivers more energy to the spark plug for better overall performance.e6778 Universal with 90° plug capse6779 Universal with 135° plug capse6787 ‘91-up Softail®e6781 ‘86-up XLe6784 ‘85-up FLT

BlUe stReaK ignition WiRe sets tRiple silicone xxxBlue Streak’s ready to install custom fit 8mm Triple Silicone wire sets can be used with stock coils or when upgrading to a performance coil. These spark plug wire sets meet or exceed all of the factory’s requirements. Our special “XXX” triple silicone, wire features a quality construction of silicone throughout the jacket, insulation and core. This assures high temperature resistance and high durability. Our wire sets also offer maximum RFI suppression, and feature high dielectric strength silicone boots, OEM style terminals that lock onto the spark plug and much more.e2408 2000-present Softail® Repl. oem 32358-00a e2409 ‘99-02 Dyna Repl. oem 31930-99e2416 ‘99-02 FLHT, FLT touring models Repl. oem 31932-99e2417 ‘80-84 FLH, ‘85-99 Softail® ‘91-98 FXD Repl. oem 32093-98

IGNITIONS

5-16

dyna ReV limiteRMissed shifts and over revving are a main cause of engine failure. Dyna Rev Limiters effectively prevent your engine’s rpm from exceeding a predetermined rev limit that is completely user adjustable. At or above the selected rpm, any further spark is suppressed until the rpm falls below that level. Continuously adjustable from 6000 to 12000 rpm. Pre wired and easy to install. One year factory warranty.e1733 Dyna Rev Limiter

dyna tWo stage ReV limiteRSpecifically designed to maximize launch performance and over-rev protection. It allows a precisely controlled launch rpm to be set, while guaranteeing against over-rev damage due to missed shifts or drive train breakage. The launch limit is adjustable from 2500 to, 6500 rpm and the over-rev limit is adjustable from 5500 to 9250 rpm. Both ranges are adjustable in 250 increments. Advanced microprocessor technology constantly monitors rpm with great precision and deletes the correct number of ignition pulses to hold the engine at the exact desired rpm. Must use clutch with a clutch release switch or a special delay/relay circuit. e1734 Dyna Two Stage Limiter

dyna ignition BoosteRBoost ignition power in your points equipped bike. The unique Dyna Ignition Booster improves performance by transforming the usual inconsistent electrical surges into precisely controlled bursts of energy to the coil for more thorough and efficient combustion.e1722 Single pointse1723 Dual points

dyna ignition systems dyna 2000hd coil ReqUiRementse1850 Dyna 2000HD 8 Pin Single fire ignition system........Use coil E1726 - 3 ohm, angled single output paire1851 Dyna 2000HD 8 Pin Dual fire ignition system..........Use coil E1728 - 3 ohm straight dual output eache1737 Dyna 2000HD 7 Pin Single fire ignition system.......Use coil E1726 - 3 ohm, angled single output paire1738 Dyna 2000HD 7 Pin Dual fire ignition system .........Use coil E1728 - 3 ohm straight dual output each

e1716 8-7 pin harness adapter for ‘94-up modelse1739 Harness extension for early models

Technical: The Dyna 2000 is fully compatible with the stock 7or 8 pin connector found on the late model wiring harness. An 8 to 7 pin

adapter is available for ‘94-up models. For older bikes an extension harness is available to complete installation. If you will be using a Dyna S ignition as a pickup, you will need the E1717 adapter kit which includes billet rotor for camshaft, wiring and instructions to connect the Dyna S to the Dyna 2000HD. The Dyna 2000 ignition may be used with any coil with primary resistance of 2.5-3 ohms.

dyna 2000 pRogRammaBle ignition systemsThe user can select between the available curves to maximize performance for the particular engine being used. The programmable rpm limiter can be adjusted between 6000 & 7500 rpm.

RUBBeR Boot 7 Pin wiring harness module. Sold each e2042 Rubber boot oem 74412-91

5-17

IGNITIONS

dyna s dUal fiRe electRonic ignition systemThe Dyna S is a complete self contained electronic ignition system featuring magnetic sensors unaffected by rpm changes, dirt or oil. This unit is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer so the factory advance curve is maintained. Improves performance, extends the life of spark plugs and eliminates points and condensers.

dyna s single fiRe ignition systemThe Dyna S Single Fire System has all the great features of the Dyna S Dual plus independent firing of front & rear cylinders. Single Fire System’s independent firing allows for more accurate timing of each cylinder.

dyna 2000i pRogRammaBle ignitionThe Dyna 2000i Digital Ignition has a one piece aluminum housing and thermally conductive epoxy encapsulation to provide superior heat dissipation and outstanding resistance to shock, vibrat ion,and moisture. It is completely self contained. The entire unit hides under the cam cover for a clean look on custom bikes. It will operate in all combinations of single fire or dual fire with single plug or dual plug heads when used with appropriate coils.

sensoR plate stUds Fits all electronic ignition sensor plates and cone electronic ignitions. 5 pack e2041 Plate studs oem 32606-82

ignition RotoR scReW Fits all electronic ignitions. 10 pack e3959 Rotor screw oem 2611c

pRogRammaBle ignition featURes inclUde• Eight point fully definable wide open throttle curve • Eight point fully definable part throttle curve• Rev limit programmable in 50 RPM steps • Programmable dead cranking revs 0-10• Programmable rear cylinder offset total of +/- 10º

e1720 ‘70-79 & ‘80-up if points-style base plate & advance weights are usedDyna S Dual fire Ignition - Dyna Coil Requirements:e1724 Single Plug Heads/Street or Race requires 1 coil 3 ohm paire1728 Single Plug Heads/Race 3 ohm eache1729 Single Plug Heads/Street 5 ohm eache1725 Dual Plug Heads/Street or Race 1.5 ohm paire1727 Dual Plug Heads/Street or Race requires 2 coils 1.5 ohm each

e1721 ‘70-up advance weight mechanism required on ‘80-up modelsDyna “S” Single fire Ignition - Dyna Coil Requirements:e1731 Single Plug Heads/Street, 5 ohm paire1726 Single Plug Heads/Race, 3 ohm paire1724 Dual Plug Heads/Race, 3 ohm paire1730 Dual Plug Heads/Street, 5 ohm paire1728 Dual Plug Heads/Race, 3 ohm requires 2 coils eache1729 Dual Plug Heads/Street, 5 ohm requires 2 coils each

*Note: The Dyna 2000i fits all ‘70-98 carbureted models of H-D® motors. ‘82 and earlier models require a sensor cup addition H3958 page 5-23. 8 curves, adjustable retard, rev limiter 6-7500rpm, static timing light and heavy billet construction.e1740 2000i Programable Ignitione1708 Interface software

IGNITIONS

5-18

dyna 2000 ignition system KitThe Dyna SFK kits match a Dyna 2000HD1E ignitionmodule with the proper TwinFire coil for Softail®, Dyna, FXR, FLH, and Sportster® models. If you want the best possible ignition system in a clean easy to mount package, the new Dyna 2000HD1E and TwinFire Coil Kit provides the best possible ignition for your Harley®.e1766 Pre-‘93 Sportster® & FLH & Pre-‘94 FXR e1768 ‘94-up Sportster® & FLH

tach adapteRThis dedicated wire provides a clean continuous tach signal when a single fire ignition has been installed. e1718 Dyna Tach Adaptere1827 Compu-Fire® Tach Adapter use with single fire coils

dyna tc digital ignition systemSingle fire, fully programmed performance ignition. 16 programmable advance curves. 8 Rev limiter settings, coil compatibility and coil current provides full spark energy. All stock sensors used. For Twin Cam® 88 carburetors.e1932 ‘04-up Twin Cam®

e2089 ‘99-03 Twin Cam®

dyna’s ignition system KitNow you can purchase your Dyna “S” and Dyna Coils all on one kit. The Dyna DSK, Dyna “S” and Dyna Coil kits, are available in either Single or Dual fire and are packaged with the correct coil for street applications.e1770 ‘70-up dual firee1771 ‘70-up single fire

dyna hd pRogRamming KitTake your Dyna Ignition to the next level with the Dyna HD programming kit. This kit works with our prgrammable ignitions. Now over the counter buyers, performance tuning shops and engine builders can find all that they need to properly tune their bikes.e1933 Programming kit

cRane fiReBall hi-4e ignition modUlee1995 ‘95-99 Evolution® with 8-Pin Connector e1994 ‘84-94 Evolution® with 7-Pin Connector

IGNITIONS

5-19

cRane hi-4 ignition systemsCrane’s HI-4 series ignition fits ‘70-83 Big Twins and ‘71-82 Sportster®, if mechanical advance and points or early pre-83 electronic ignition sensor is replaced by rotor E3958 pg. 5-23 and can be set for street or race. The dual fire unit includes a 4000 to 8000 adjustable RPM limiter with adjustment for rate of advance. It is compatible with stock dual fire coils, but for maximum output, our E6825 or E6834 dual fire coil is recommended. Single fire coil includes rear cylinder timing adjustment +/- 5° with adjustment for rate of advance. Our single fire coil E6838 is recommended for optimum performance.e6831 HI-4 Dual Firee6832 HI-4 Single Firee6833 California Legal Single Fire same as E6832 except there is no rear cylinder adjustment

cRane fiReBall hi-4tc peRfoRmance ignition e1945 ‘04-up Twin-Cam 88® carbureted enginese6821 ‘99-03 Twin-Cam 88® carbureted engines cRane pRogRammaBle softWaRe Kite1946 ‘04-up Twin-Cam 88® PC link cable & software kite1944 ‘99-03 Twin-Cam 88® PC link cable & software kit

IGNITIONS

5-20

accel® extension caBleSome models mount the ignition module in locations requiring a longer wiring harness. We now offer this extension harness to eliminate cutting and splicing. American made.e2650 ‘84-up Big Twins

accel® mega-fiRe™ ignition modUleAccel’s Mega-Fire™ ignition module gives the rider freedom to program an advance curve to his bike. Curves 1 & 2 are for riding a stock bike with or without a passenger. Curves 3 & 4 are intended for use on modified bikes. Comes complete with simple curve changing instructions. Unit features a unique self-diagnostic LED light that confirms the module is operational. e2640 ‘95-up Big Twin EVO use conversion harness E2412 below on ‘84-90 Extension cable

accel® ReV masteR Rpm contRol modUlePremium quality American Made Rev Master is pre-set by the rider to a specific RPM limit. When engine speed reaches this RPM, the Rev Master interrupts coil triggering, thereby preventing engine damage due to over-revving. It is precise to within +100 RPM of the selected limit, is compact in size 4 ¾” x 2 ½”. When used with stock electronic ignition it will only limit lower than the stock unit. Comes complete with instruction sheet and hardware kit for easy installation. e2890 ‘57-77 XL models, ‘48-77 FL/FX models points triggered, ‘78-up FL/FX/XL models electronic triggered

cRane hi ignition systemsHI is a high energy inductive storage system that replaces factory ignition systems and can increase energy up to 4 times over stock. It can be used with any high quality coil with 2-3 ohms of primary resistance. This system is not affected by R.P.M. changes, dust, dirt, oil, gasoline, water or any other contaminants that might get into the ignition housing. It will operate from -40 to +300 degrees F. Easily installed.e6830 HI 1 dual fire, single module, single coile6840 HI 2 single fire, dual module, dual coil. May be used with dual plug heads. Electric tach applications require the use of tach adapter E6850e6850 Tach Adapter, tachometer interface used with E6840e6860 Replacement rotor for E6830e6870 Replacement rotor for E6840

cRane hi-4 ignition, coil & WiRe KitHI-4 High-Output Ignition, High-Output Coil, 8.5mm Spark Plug Wires Kit for 1970-98 Big Twin and some 99 Big-Twin with Evolution Engine, Non Fuel Injected; 1971 and up Sportster, except XL 1200S. e1947 Complete kit

5-21

IGNITIONS

compU-fiRe® hde-5, hde-6 ignition modUlee1877 ‘96-up EVO Big Twin without fuel injection ‘94-95 FLT, FLHT, FLHS, FLHRe1876 ‘91-93 FLT, FLHT, FLHS ‘91-95 Softail®, FXR, Dynae1878 ‘91-93 Sportster® & Buell® with 7 Pin ConnectorNOTE: Will not work on fuel injected bikes. To use module E1876 or E1878 on ‘84-90 Big Twins or ‘86-90 XL, you need conversion harness part E2412 see page 5-20.

mechanical adVance systemsRPM Limiter is eliminated thereby optimizing engine performance for all riding conditions.e1803 System H-D 4, Single Fire - Dual Plug

compU-fiRe® elite 1 electRonic ignition systems

mechanical adVance modUle Kitse1804 Module Kit, Dual Fire - Single Plug ‘70-up Big Twin & XL w/ pointse1805 Module Kit, Single Fire - Single Plug ‘70-up Big Twin & XL w/ points

e1804

e1800

e1816

elite-1 electRonic pRogRammaBle adVance modUlespaRt# descRiption application compUfiRe#e1816 Module - with programmable advance ‘70-up Big Twin EVO & XL w/ stock and

mild compression20600

e1824 Module - race module with RPM limiter 20550

e1825 Module - high compression street ‘70-up Big Twin EVO & XL w/ high performance

21835

electRonic adVance modUlesUse only with stock or mild performance engines.paRt# descRiption application compUfiRe#e1814 Module - dual fire, single plug ‘70-up Big Twin EVO & XL w/ stock

compression20500

e1815 Module - single fire, single/dual plug ‘70-up Big Twin EVO & XL w/ stock compression

20550

IGNITION ACCESSORIES

5-22

cam position sensoR plate assemBlyStandard Motor Products OE style Cam Position Sensors feature a highly sensitive hall effect sensor to assure accurate timing position, with built in voltage regulation, reverse battery protection and superior temperature stability.e2559 ‘80-93 FLT, ‘80-94 FXR, ‘84-85 FXST, ‘80-94 XL Repl. oem 32400-80a, 32400-83a

VacUUm opeRated electRical sWitchesStandard Motor Products Vacuum Operated Electrical Switches VOES are produced from high tech engineered thermoplastics, and are 100% calibrated and tested at vacuum to assure the accuracy and reliability of each part. Our self assembly kits allow the user to select a part from various pre set levels of calibration for their specific tuning needs. Kits come complete with bracket crimp terminals and instructions for easy installation. Made in the USA.e6822 Self Assembly Kit @ 6” of Mercury 100” Motor & up

chRome modUle coVeRFits perfectly over 4 speed Big Twin ignition modules. ‘80-86 FL, FX, & ‘84-86 FXST.e1652 Module cover Repl. oem 32407-88

ADVANCE uNITS & ACCESSORIES

5-23

adVance Unit assemBlye3130 Complete advance unit Repl. oem 32515-85t

adVance Unit Replacement paRtse3440 Breaker weights, pair Repl. oem 32522-70te3450 Breaker weights springs, pair Repl. oem 32605-70te3460 Circuit breaker cam Repl. oem 34542-70tae1653 Circuit breaker base assembly with point & condenser. Repl. oem 32577-70e1654 Shaft & plate Repl. oem 32629-70te1655 Timer screw Repl. oem 3570t 10 packe1656 Primary lead wire Repl. oem 70456-73e1657 Weight and cam assembly complete with weights, pins, springs, breaker cam & shaft.e1658 Breaker plate screw Repl. oem 32601-78 10 pack

This replaces existing unit on Big Twins ‘70-78, 71 & E78 Sportster® and converts late ‘78-up electronic ignition to point type.

points conVeRsion KitRetrofit your Harley® to dependable points ignition or upgrade your existing points system with this conversion kit. Comes complete with precision-ground breaker cam, extra-thick breaker plate, high RPM 32 oz. Accel points set with integral microchip condenser and reliable advance weights and spring mechanism. Studs, hardware and primary wire provide easy installation. e2680 ‘70-E77 FL & ‘71-E78 FX/XL performance upgrade, L78-up Big Twin electronic ignition for conversion to point type

chRome ignition distRiBUtoRComplete ignition distributor with centrifugal advance. e3960 ‘66-69 Big Twins Repl. oem 32502-66a

distRiBUtoR shaft BUshingAmerican made by Jim’s Machining for ‘29-73 Big Twin, Sportster®, K models, 45” & Morris Magnetos. 2 pack.e1490 Shaft bushing Repl. oem 32525-36a

electRonic ignition RotoRWill not work with fuel injected models.Sold each. e3958 ‘80-up stock Big Twins, XL Repl. oem 32402-83

POINTS, CONDENSOR & TuNE uP KITS

5-24

accel® peRfoRmance points & condenseRs23 oz. heavy-duty points sets are built with high quality materials to assure long life. The Hi-Rev point sets eliminate point bounce and float for crisp, accurate spark at extremely high engine speeds. The condenser cushions primary current to provide extended point life. It’s high capacitance mylar/foil construction eliminates internal shorting.e2413 Heavy-Duty ‘71-E78 XL/CH, ‘70-E78 FL, FLH’s standard 23oz. points only Repl. oem 32661-70e2414 ‘70-E78 FX models high performance 32 oz. points onlye2415 Condenser ‘54-E78 XL’s, ‘41-E78 FX’s, ‘58-69 XLCH Repl. oem 32726-30ae2835 Points ‘58-69 XLCH, Repl. oem 29533-55ae2829 Condenser ‘58-69 XLCH, Repl. oem 29534-55a

points & condenseRs With spaRK plUgsHigh performance 32 oz. points, premium condensers and U-Groove spark plugs provide you with the ultimate tune-up kit for your Harley®. e2401 ‘48-69 FL, FLH Pan/Shovel e2402 ‘70-74 FL, FLH, FX, FXE Shovelhead e2403 ‘75-E78 FL, FLH, FX, FXE ¾” reach plug e2404 ‘57-70 XL, XLHe2405 ‘58-69 XLCH with magnetoe2406 ’71-E78 XL, XLH, XLCH, XLCR

peRfoRmance tUne-Up KitsAccel’s high performance 32 oz. points accompany our premium high performance condensers. Faster, easier starts, cleaner idle, crisper throttle response and improved top end performance without points bounce.e2370 ‘70-77 FLH, FX ‘71-77 XL, XLCHe2380 ‘48-69 EL, FL, FLH, ‘54-70 KH, XL, XLH, ‘70 only XLCH Repl. oem 30605-48ae2390 ‘58-69 900cc 55 cid with magneto

BlUe stReaK® peRfoRmance pRodUctsBlue Streak® ignition points feature heavy duty construction, Lubriwick, oversized ventilated contacts and copper shunts. Our O.E. style points and condensers are equivalent to or better than Original Equipment.e2531 ‘71-E78 XL’s, ‘70-E78 FLH, ‘70-E78 FX’s Repl. oem 32661-70e2532 ‘71-E78 XL’s Repl. oem 32726-30a ‘70-E78 XL’s Repl. oem 30801-47, ‘70-E78 FX’s Also fits all Sportster® & K Models, except Magneto from ‘54-78 and Big Twin from ‘30-78e2533 High Performance Point Set and Condenser Set. Includes one E2531 and one E2532

5-25

GENERATORS, CONVERSION KITS & COVERSgeneRatoRse3060 12-volt chrome Big Twin ‘65-69, Spst ‘65-81 Repl. oem 29976-83te3070 12-volt black for Big Twin ‘65-69 Spst ‘65-81 Repl. oem 29975-65ta

accel® geneRatoR conVeRsion KitUpgrade your 6 volt generator to modern 12 volt performance without any external modifications. This American made kit includes heavy-duty armature, field coil set, brushes, seals, gaskets, premium 12 volt solid state regulator with bracket and 13 tooth gear. Kit can also be used to rebuild ‘65-69 12 volt generators.e2815 6v to 12v conversion

chRome geneRatoR endcoVeRs By paUghcoBrackets included. e6501 ‘57-81 Sportster® Repl. oem 30181-83te6502 3-Brush

chRome geneRatoR coVeRse3080 Big Twin ‘58-69, Spst ‘57-81, 2-brush Repl. oem 31080-83

geneRatoR allen scReW sets By gaRdneR-Westcottf4500 ‘58-69 Big Twinf4490 ‘71-E84 XL

GENERATOR PARTS

5-26

accel® geneRatoR oVeRhaUl KitAccel’s 6 & 12 volt overhaul kits are accompanied by a special double lip oil seal which guards against oil seepage into the generator & a UL approved fiber generator cover gasket impregnated with chemical solids, maintaining a seal under extreme conditions. e2090 Overhaul Kit

accel® geneRatoR BRUsh setse2070 6v & 12v generators Repl. oem 30426-58 e2080 6v generator Repl. oem 30425-51e2816 6v generator Repl. oem 30425-32

geneRatoR aRmatUResAccel’s Armatures have heavy gauge copper windings, are precision machined and have super heavy-duty laminations.

accel® geneRatoR field coil setAccel’s field coil sets are recommended for use with Accel armatures & brush sets for maximum charging performance. They also function exceptionally well with OEM parts. Accel field coils feature: warp free laminates, heavy gauge copper wiring, wrapped cloth installation.e2050 12v generators 2 brush Repl. oem 30201-65ae2814 6v generators 2 brush

geneRatoR geaRe3550 Big Twin ‘58-69, XL ‘58-E63 13 tooth Repl. oem 31070-58e3551 ‘63-84 XL 14 tooth Repl. oem’s 31075-63a & 31073-63a

geneRatoR BeaRingB3914 ‘58-69 Big Twin & ‘58-81 Sportster® Generator end cover with needle bearing and seal Repl. oem 9088

accel® alteRnatoR statoRsMade in the U.S.A. from the finest components available, these high quality stators are backed by a lifetime

replacement warranty on all eight part numbers which cover all Big Twins from 1970 to present and Sportster® from 1985-present. Each stator is indiv idual ly wrapped and packaged in an attractive four color display box.

accel® Repl. oem aRmatURe applicatione2110 30851-65a 12V, ‘65-81 xl models & ‘65-69 fle2100 30851-61 6V, ‘61-64 xl, xlh/ch, ‘61-64 fl

accel impoRt amp type application Repl. oem

e2807 e1692 32 Unmolded ‘89-up Big Twin 29970-88ae2808 --- 22 Unmolded ‘91-up XL 29967-89e2806 --- 19 Molded Late ‘84-90 XL 29967-84ae2805 e1691 19 Unmolded Late ‘84-90 XL 29967-84ae2804 e3680 22 Unmolded ‘81-88 Big Twin 29965-81ae2803 --- 22 Molded ‘81-88 Big Twin 29965-81a

--- e3020 17.8 Unmolded ‘76-80 Big Twin 29965-75e2802 --- 17.8 Molded ‘76-80 Big Twin 29965-75

e2801 e3010 15 Unmolded ‘70-75 Big Twin 29965-70

5-27

CHARGING SYSTEMS, STATORS & ROTORS

complete chaRging systems fRom spyKeSystems includes stator, rotor & voltage regulator

complete chaRging systems fRom engine electRonicsSystems includes stator, rotor & voltage regulator

complete 32 & 38 amp chaRging systems

paRt # amp applicatione2991 38 amp

Wide Stator / Rotor1989-up EVO

fLt & fXR onlye2990 32 amp

narrow Stator / Rotor1981-1999

Big twins EVOexcept f/I

e1892 32 ampnarrow Stator / Rotor

1981-1999 EVO Big twin & Aftermarket

e1862 38 ampWide Stator / Rotor

EVO StyleAftermarket Engines

fLt & fXR only

complete 3 phase 40 amp chaRging systems

paRt # amp applicatione1940 40

amp1981-1999 EVO Big twin

includes vented rotor aftermarket engine, closed primary

e1942 40 amp

2003-06 twin Cam®

except ‘06 Dynae1948 40

amp1999-2002 twin Cam®

includes vented rotore1941 40

amp1981-1999 EVO Big twin

includes non vented rotoraftermarket engine, open primary

e1943 40 amp

2003-06 twin Cam® except ‘06 Dynaincludes non vented rotor

open primarye1949 40

amp1999-2002 twin Cam®

Includes non vented rotor

compU-fiRe statoRspaRt #oem #

amp application

e185429970-88

32 amp 1981-1999 EVO Big twin & Aftermarket

e186729987-97

38 amp EVO HD & Aftermarket Big twins

e186829981-95

38 amp 1998-up twin Cam® fLt only

e1895 40 amp twin Cam® Big twins

compU-fiRe RotoRspaRt #oem #

amp application

e185529957-81

32 ampCompufire

1981-99 hd eVo Big twin

e395729957-81

32 ampoem

1981-99 hd eVo Engines

e186529981-95

38 ampWide

1998-up twin Cam® Engines

e1864 38 ampWide

1984-97 EVO Engines fLt & fXR Aftermarket

e1894 32 amp 1981-99 EVO Big twin Aftermarket

Voltage RegUlatoRspaRt #oem #

amp application

e187074519-88

32 amp 1989-99 Big twinBlack finned

e187174516-86

22 amp 1981-88 Big twinBlack finned

e187574523-91

22 amp 1991-99 SportsterBlack finned

e1880 32 amp 1989-99 Big twins & Aftermarket - Chrome

e186974505-97

38 amp 1998-02 Big twinBlack finned

Single Phase Onlye1887 40 amp Replacement for E2991

& E1893 - Chromee2992 Complete 32 Amp system for 1970-99 Big Twin except Twin Cam® Chromee2993 Heavy Duty Rotor 32 Amp 1970-99 Big Twin except Twin Cam® Black

Please see E1841 High Torque Starter on Pg. 5-31 for use with these 40 amp charging systems.

VOLTAGE REGuLATORS

5-28

accel® ness-stylesignatURe seRiesRegUlatoRsBeautiful design and “show quality” chrome plating makethis a must for any stock or custom application.

accel® solid state electRonic Voltage RegUlatoRsThese Accel Voltage Regulators are available in black or chrome finish for that custom look or black with polished fin tops for a stock look .

compU-fiRe®

Voltage RegUlatoRsThese regulators are suitable for maintenance free batteries. The circuitry opens charging system when battery is charged, resulting in cooler stator operation compared to O.E. shunt style which grounds system at full charge, end result is extended system life.

cRane peRfoRmance Replacement RegUlatoRsBolt on installation comes complete and ready to install on any Stock chassis. Custom look chrome finish.e6029 ‘81-88 Big Twin EVOe6028 ‘89-99 Big Twin EVO

a B c d e g hf i

Accel®Ness Style

ChromeCompu-

fire

Accel®Chrome

Accel®Black

ReplacesOEM

Application Engine Charging Syst. Type Conn. Type

E1869 Blk 74505-97 ‘98-02 touring models Twin Cam®

1450cc1340cc

38 Amp AlternatorSingle phase only

A

E1887 ‘81-99 Big Twin 38-40 Amp AlternatorAdded connectors to work for 38 Amp

E2780 E1880E1870 Blk

E2250 E2825 74519-88 ‘89-99 EVO Big Twins 1340cc 32 Amp Alternator B

E2790 E1884E1875 Blk

E2690 E2826 74523-9174523-92

‘91-99 XL Models 883 &1200cc

22 Amp Alternator C

E1881E1871 Blk

E2240 E2823 74516-86 ‘86-88 Softail®, ‘82-88 FXR, ‘81-88 FLT, ‘81-86 FXWG, ’81-85 FX, ‘81-84 FL

1340cc 22 Amp Alternator D

E2770 E1885E1874 Blk

E2270 E2824 74523-84A ‘86-90 XL 883 &1200cc

19 Amp Alternator C

E2750 E2230 E2822 74504-82 ‘82-84 XL 1000cc 12v Generator F

E1882 E2190 E2818 74512-79A ‘76-80 FL/FX 1200 &1340cc

17.8 Amp Alternator G

E2730 E2200 E2819 74504-78 ‘77-81 XL 1000cc 12v Generator E

E2710 E1883E1873 Blk

E2180 E2817 74510-70A ‘70-75 FL/FX 1200cc 15 Amp Alternator H

E2740 E2220 E2821 All 12v ‘65-77 XL1965-69 FL

900,1000 &1200cc

Repl. 12v Mech. RegulatorFor 12v Generator

I

E2820 74510-47A74510-59

‘58-64 FL/XL 900cc,1200cc

Repl. 6v.Mech. RegulatorFor 6v Generator

I

VOLTAGE REGuLATORS & BRACKETS

5-29

accel® electRo-mechanical Voltage RegUlatoRs

e2160 Bosch type, chrome fits ‘65-66 XLH & ‘65-77 XLCH Repl. oem 74511-65e2130 Delco type, chrome fits ‘65-69 FL, FLH & ‘67-77 XLH Repl. oem 74510-64e2827 Delco type, chrome fits ‘52-64 K & XL, ‘58-64 FL/FLH Repl. oem 74510-47a

e2130e2160Accel’s Regulators are set to exact OEM specifications and feature heavy-duty shock mounted steel bases, vibration resistant internal wire connections, OEM style covers, fiber and mylar insulating pads, and large diameter contact surfaces.

UniVeRsal BRacKetBracket for universal models. Used to mount E2210 or E2220 to all stock 1200cc frames.e2310 Stainless Steel Bracket

chRome RegUlatoR BRacKetse1690 ‘76-86 FL/FX, ‘80-86 FXST Repl. oem’s 74533-75B & 74534-80

WiRe haRness foR elite 1 Voltage RegUlatoRsWire harness only for Elite 1 voltage regulators as pictured.e1832 Wire harness Asst. 1 EA. of 6e1835 Wire harness 17.8A ‘76-80 BTe1836 Wire harness Asst. ‘70-75 BTe1852 Wire harness ‘91-up XLe1853 Wire harness ‘84-90 XL

e2170 Bosch type, black fits ‘65-66 XLH & ‘65-77 XLCH Repl. oem 74511-65

e2150 Delco type, black fits ‘52-64 K & XL, ‘58-64 FL, FLH Repl. oem 74510-47a

RegUlatoR moUnt allen scReW sets By gaRdneR Westcottf6156 ‘76-84 FL/FX, ‘84-up Softail®,‘91-up Dynaf6117 ‘80-up FXR & FLT includes bracket mountf6138 ‘82-up XL

VOLTAGE REGuLATORS & STARTERS

5-30

fiReBall Voltage RegUlatoR With BUilt in BatteRy chaRgeR• Unique Series Design Regulator Provides Proven Horsepower Increase By Eliminating Alternator Drag. At high RPM or when battery is fully charged, disconnects alternator operation, applying formerly wasted horsepower to the rear wheel.• Billet Extruded Aluminum, Bad-Ass Black With Brushed fins. Absolutely the best looking regulator available with easy plug in installation.• Maximum Battery Charging With All Alternators. Works great with stock and all high output alternators.• Plug In 110v AC Outlet Smart Charger Keeps Battery topped Off. Prevents damaging overcharges and dangerous boil over. Extends Battery life. Compact and convenient.• Great for Weekend Riders Or Anyone Who Stores their Bike for Days, Weeks, or Months. Smart charger with microchip controlled pulse charging, charges only when necessary. Trickle or float chargers can overcharge reducing battery life.• Built In Microcontroller Chip Adapts Instantly to All Operating Electrical system needs At All RPM Levels. Alternator charges only when needed. At high RPM, full throttle or race use, alternator function disconnects, increasing engine HP output.• Digital Microcontroller Chip Protects Against Heat. Reduces and compensates for damaging overheating with built in temperature sensor. Protects alternator, regulator, and battery.

e6031 ‘99-up Twin Cam® 88®, except Fuel-Injectede6032 ‘89-up Big Twins, except Fuel-Injectede6033 Most ‘81-88 Big Twinse6034 ‘84-up Sportster® ‘84-90 must use adapter harness

hitachi type electRic staRteRFits ‘74-76 XL’s, ‘73-88 FX and ‘82-84 FL’s. Available in both chrome and black. Replacement parts available.e1664 Black Repl. oem 31570-73e1665 Chrome Repl. oem 31559-89te1666 Replacement armature Repl. oem 31580-73e1667 Replacement brush set Repl. oem’s 31582-73 & 31575-73

staRteR coVeRsCover that black starter with a brightly chromed cover. They cover a variety of applications and easily install in minutes.e3100 ‘74-86 FX, ‘74-76 XLX with Hitachi type starter Repl. oem 31351-83te3120 ‘66-82, FL, ‘67-80 XL with Prestolite type starter Repl. oem 31350-83t

pRestolite type electRic staRteRFits ‘67-80 XL’s, ‘66-82 FL’s are available in both chrome and black. Replacement parts available.e1659 Chrome Repl. oem 31458-66ae1660 Black Repl. oem 31458-66ae1661 Replacement armature Repl. oem 31542-66e1662 Replacement brush set Repl. oem’s 31541-66e1663 Replacement thru bolt Repl. oem’s 31535-66

STARTERS

5-31

compU-fiRe® high toRqUe staRteR motoRs

Reliable cranking power for high compression engines. Made up of all new

components-no remanufactured parts.

e1838 ‘90-93 Softail®, FXR Gen II Starter 1.4 kw Starter Motor up to 100 CI Repl. oem 31553-90

spyKe sUpeR toRqUe staRteRsThese starters feature a gear reduction design which allows superior cranking torque compared to stock. All starters have a chrome finish.e1812 ‘94-06 Big Twin Evo except Twin Cam® 1.4 kw e1820 ‘99-06 Big Twin & Twin Cam® 1.4 kw e1826 ‘94-06 Evo Softail® except ‘06 Dyna 1.8 kw e1828 ‘94-up Evo Softail® 2.4 kw

Belt dRiVes limited high peRfoRmance staRteRThis high performance starter was designed for EVO-103” Shovelhead kits. This starter fits perfectly into the limited space available when installing our Shovelhead 3” kit. Black wrinklee1905 ‘89-up Big Twin 1.2 kw

heaVy dUty staRteRsThese heavy duty starters will work for 1989 thru 2005 Big Twin models. All starters are built with new components not re-manufactured like some of the competition. Each starter is individually tested with data sheet included.

1.4 KW seRies• Available in chrome finish• Fits all 1989-05 Big Twins with no clearance issues• Works with OEM battery

2.0 KW seRies• Made for big inch engines• Heavier clutch gears• Fits some stock applications on Big Twins where 7/8” longer body is not a problem• Fits FLT and Dyna when ued with ???? oil filler spacer• Includes manual push button cap on solenoid• Requires a 300 amp battery & good cables for best results

2.4 KW seRies• Made to start anything big inch• Heavier clutch gears• Includes manual push button cap on solenoid• Requires a 300 amp battery & good cables for best results

top post KW angled poste1906 1.4 e1909e1907 2.0 e1910e1908 2.4 e1911

e1847 ‘99-06 Twin Cam® & ‘99-05 Dynae1841 ‘90-99 Big Twin except Dyna Gen III Starter e1856 Adapter shaft required when using 3” BDL drive

compU-fiRe® gen iii high toRqUe staRteRThis high torque starter features:• New Neo Magnets • New Clutch Design• 30% More Torque • Polished Chrome Finish

e1912 Starter push button for 1.4 kw

Please see 40 amp charging systems on Pg. 5-27 for use with this High Torque Starter.

STARTER ACCESSORIES

5-32

accel® staRteR dRiVeAccel’s heavy duty starter drive. Five roller clutches are used to reduce internal stress. Specially hardened receivers provide smooth reliable starter engagement. Corrosion resistant stainless steel springs eliminate binding. Precision-ground gears last longer and prevent ring gear damage.e2040 ‘65-88 electric start models except 81-88 XL Repl. oem 31443-65a

staRteR BeaRingsB3912 ‘66-82 Big Twin & ‘67-80 Sportster® Starter Shaft Housing needle bearing Repl. oem 9062B3915 ‘66-82 Big Twin & ‘67-80 Sportster® Starter Motor Drive End Repl. oem 31539-66

jacKshaft assemBlye1649 ‘94-06 Big Twins except Dyna 10 tooth e1650 ‘89-93 Big Twins 9 tooth

staRteR dRiVe fRom standaRd motoR pRodUctse2039 ‘91-up Big Twins & XL Repl. oem 31663-90

staRteR Ring geaR sets10/84 gear sets.e1859 ‘90-93 Big Twins e1860 ‘94-97 Big Twins e1861 ‘98-06 Big Twins except ‘06 Dyna e1856 BDL adapter shaft Shaft required when using 3” BDL drive

staRteR pinion geaR 9 toothWill fit all Softail®, FXR & Dyna’s for use on BDL 3” Belt Drives with 66 tooth ring gear. ‘90-06 p5004 9 tooth starter pinion gearp5005 +1” 9 tooth starter pinion gearp5004 p5005

STARTER SOLENOIDS

5-33

accel® staRteR field coil set Prestolite TypeStandard Torque set gives you all the power of a new stock starter with minimum current draw. High Torqueset is specially wound to provide 20% more cranking torque for stock or modified engines. Made in the U.S.A.e2812 STD. Torque, Repl. oem 31458-66ae2813 High Torque, Repl. oem 31458-66a

accel® staRteR BRUsh & teRminal setThis Starter Brush & Terminal Set restores your Prestolite starter to peak performance. e2800 L66-82 FL, ‘71-72 FX, ‘67-80 XL Repl. oem 31541-66

Guaranteed starter engagement under the most severe conditions. They feature

permanently sealed, moisture-proof cases, heavy-duty multi-weld brackets, hardened steel plungers with long life contact discs &

high dielectric strength end caps. American made and available in “show

quality” chrome or zinc plate.e2020

staRteR solenoids foR Big tWins & xl

accel® staRteR solenoid RepaiR KitAccel’s easy-to-use starter solenoid repair kit is equipped with all the parts needed to restore Accel’s or OEM starter solenoids to original condition. Kit comes with lugs, plunger with spring assembly, bakelight cap & hardware to repair solenoid. Made in the U.S.A. e2060 Solenoid repair kit Repl. oem 71465-85t

staRteR solenoid RepaiR KitThis OEM starter solenoid repair kit is equipped with all the parts needed to restore factory starter solenoids to original condition. Kit comes complete with all parts and hardware necessary. e2061 ‘90-present Big Twins oem 31604-91

chRome Zinc Repl. oem accel® yeaR modele2010 71469-65B 40111c Early Single Bracket four Speeds

e2810 71469-65B 40111 Early Single Bracket four Speedse2020 31489-79B 40114c Late Double Bracket five Speeds Except Softails®

e2811 31489-79B 40114 Late Double Bracket five Speeds Except Softails®

e2010

STARTER RELAYS

5-34

accel® staRteR Relay Accel’s 100% American made Bosch style starter relay features durable,self-cleaning silver contacts enclosed in a rugged injection molded case. Designed to handle high current draw with ease.e2030 ‘80-up XLH, ‘80-up FX & FL, 1986-up FXWG, FXST, FXR Repl. oem 31506-79Be2542 Starter/brake relay Repl. oem 31504-91ae2539 2000-up Micro starter relay with diode Repl. oem 31522-00

BlUe stReaK® high peRfoRmance staRteR RelayThis Blue Streak High Performance Starter Relay is designed for superior performance with heavy duty copper contacts, and an extra strong plastic case that seals out moisture and the elements to assure long life peak performance.e2534 ‘73-79 FL, FX ‘74-79 XL ‘80-up all models that use round plastic terminal style relay Repl oem 71463-73ta

accel® staRteR Relaye3430 ‘73-79 FL, FX ‘74-79 XL ‘80-up all models that use round plastic terminal style relay Repl oem 71463-73ta

fiReBall™ staRt Boost Relay By cRane® camsThe start boost relay is the answer to weak starting performance. When installed, it improves and/or eliminates the voltage drop in single fire application during cranking. Applies full battery voltage to the ignition module and coil and gets rid of the 1-2 volt drop in the Original Equipment wiring harness.e2036 Crane Start Boost Relay

plUg style staRteR RelayThis plug style Starter Relay is designed to handle high current draw and features a weather proof skirt to protect connector block. This relay fits most models 1980-upe3428 Starter Relay Repl. oem 31506-79Be3429 5 Plug Relay Socket with Pigtaile2037 5 Lug Relay Socket 5 pack oem 72046-79e2038 Terminal Relay Socket oem 9937 ¼” female spade 10 pack

STARTER MOTOR & END COVERS

5-35

chRome solenoid end coVeR and RUBBeR BootFits Big Twin ‘65-88, 4-speed Big Twin.e3040 End covere1669 Rubber Boot Repl. oem 31444-65 & 31475-77

millenniUmsolenoid end coVeRsFits Big Twin and 1200 Sportster® ‘91-up also 883 Sportster® ‘95-up. e2285 Grooved

UniVeRsal staRteR motoR coVeR By a.R.t.This hot new item will accept any points cover over its end. Customize your look on a daily basis if you wish! American made.e3104 ‘91-up Big Twins

staRteR end coVeRs foR softail®

These custom starter end covers are custom crafted to fit perfectly on Softail® models from ‘86-99 and have a smooth sweeping look to enhance the Softail’s® already clean lines. Cover is the same for all applications, while there are two versions of mounting hardware.e3101 ‘86-88 Softail®e3102 ‘89-99 Softail®

coVeRs By paUghcoStarter end cover.e6503 ‘65-88 Big Twin, ‘67-80 Sportster®

KüRyaKyn solenoid end coVeRGives a different look than the full coverage end cover. Keep your stock dome-shaped starter motor cover and add this thick little solenoid end cap. This is a complete replacement cap, only the stock gasket is re-used. Complete with chrome fasteners. Fits ‘90-present Big Twins’91-present XL1200, and ‘95-present XL883. Not for use with full coverage starter end covers.

e3105 Chrome Solenoid End Cover

staRteR end coVeR e4093 ‘67-up Big Twin

IGNITION SwITCHES

5-36

chRome fatBoB ignition sWitchesSuperb quality smooth operation 6 post ignition switch, lock assembly, including early & late caps. Fits Big Twins ‘36-up except Dyna Wide Glide®.e3690 Heavy Duty Insulated Repl. oem’s 71500-36a & 71501-73

ignition sWitchLate model ignition switch.e3645 ‘96-up Softail® ‘93-up FXDWG ‘94-up FLHR Repl. oem’s 71501-93 & 71313-96

chRome ignition sWitche1693 ‘78-85 FX models, ‘82-93 FXR, ‘78-93 Sportster® Repl. oem 71425-77

5-37

chRome Key sWitch platese1694 Transmission mount switch plate for 4-speed models mounts FX style switches to transmissione1695 Universal ignition switch bracket to mount FX & universal switches

ignition sWitch foR dynasRound key with a two position switch insures key will not fall out in off position. Fits ‘91-up Dynas except FXDWGe3691 Ignition switch Repl. oem 71428-90a

electRonic ignition sWitchFeaturing completely electronic switching and super smooth action, this is the most reliable switch available. Sealed against corrosion and vibration. Six-post design works on all ‘73-93 models except FXDWG with dash mounted switch and also adapts easily to work on ‘36-72 five-post types. Complete with keys and early & late style caps.e3692 Ignition switch

e1694e1695

IGNITION SwITCHES

chRome Billet sWitch hoUsingThis American made custom housing is great for choppers or custom bikes and can be installed to your motor mount. It will accommodate key switch, toggle switch, and push button.h3660 Switch Housing

HANDLEBAR SwITCHES

5-38

handleBaR sWitche3160 Horn or starter button Repl. oem 71800-26ta

light sWitche3170 Light switch Repl. oem 71840-29t

headlight RelayThis headlight relay allows control of hi-low beam from one wire using a button type switch.e3824 Relay for custom application

stoplight sWitch e3823 ‘82-95

e3817

e3815

e3818

e3816 e3819

e3821

e3820

e3822

82-95 Replacement handleBaR sWitches foR Big tWin & spoRtsteR®

96-Up

Chrome Black oem Description oem Chrome Black- e3823 71574-82 Handlebar Stoplight Switch 71590-96 - e3833

e3816 e3820 71571-82 Engine Run / Off, Starter 71589-96 e3825 e3829e3815 e3819 71573-82a Hi / Low Dimmer & Horn 71597-96 e3827 e3831e3818 e3822 71591-82a Right Turn Switch 71591-96 e3826 e3830e3817 e3821 71570-82 Left Turn Switch 71598-96 e3828 e3832

‘82-95 pictURed

5-39

BlacK handleBaR contRol sWitches ‘71-81e3470 Handlebar brake switch. Repl. oem 72001-69B e3480 Horn, starter, or turn signal switch Repl. oem 71484-72ae3490 Run-Off rocker switch Repl. oem 71547-75ae3500 High-Low rocker switch Repl. oem 71546-75ae1696 Long Button cap for turnsignal switch Repl. OEM 71535-72 10 Packe1697 Short Button cap for starter and horn switch Repl. OEM 71534-72 10 Pack

Replacement paRts foR handleBaR sWitch hoUsingsh3335 Retaining plate for button switch. 10 pack Repl. oem 71533-72h3336 Rubber boot for brake light switch. Sold each. Repl. oem 27751-69ph3337 Wire terminal for brake light switch. 10 pack

HANDLEBAR SwITCHES

STOPLIGHT, NEuTRAL & OIL PRESSuRE SwITCHES

5-40

UniVeRsal stoplight sWitche3140 Universal

tRansmission neUtRal sWitchesThese two switches cover most applications from ‘59-up.e1714 ‘59-64 FL, Late ‘73-Early 79 FL & FX ‘86 Softail®, 86-up XL, 87-96 FLT, FXR, FXST, FLST, 91-98 Repl. oem 33900-59e1715 L‘79-84 FL/FX, ‘84-86 FX 4 speeds Repl. oem 33901-79e1712 ‘98-00 FLT, Dyna’s and Softail®

Repl. oem 33902-98e1713 ‘01-present FLT, Dyna’s and Softail® Repl. oem 33904-00e2358 Neutral Switch connector ¼” dia 10 pack oem 9905

oil pRessURe sWitchese2320 ‘41-84 FL, FLHT, FLH-80, ‘80-83 FLT, FLHT, ‘82-83 FXR, FXRS, FXRT, ‘71-84 FX, FXE, FXS 1200, FXEF-80, FXS-80, FXB-80, FXWG-80 Repl. oem 26552-72e2330 ‘77-up XL series Repl. oem 26554-77e2340 ‘84-up 1340cc Evolution® series 5 speed except models with electronic oil pressure gauge Repl. oem 26561-84o3247 Sender unit rubber boot oem 70579-65

accel® stoplight sWitchese2350 ‘51-73 Servi-car ‘58-70 FL, FLH threaded Repl. oem 72002-51ae2360 ‘71-72 & ‘78-86 FX ‘71-86 FL series, ‘79-86 XL All models ‘87-up Repl. oem 72023-51a

chRome stoplight sWitchese1698 ‘67-74 XL push stop light switch, Repl. oem 72004-70te1699 ‘75-76 XL pull stop light switch, Repl. oem 72004-75e1700 ‘73-77 FX/E/S push stop light switch, Repl. oem 72005-73ae1701 ‘52-66 XL and K models push stop light switch, Repl. oem 72004-52

KüRyaKyn fRog moUth™ neUtRal sWitch coVeRThis glistening chrome cover goes over both the switch body and the stock rubber insulators. Its unique two piece design makes installation a breeze. Fits ‘98-present Dyna, Dresser, and Road King®.e2357 Chrome switch cover

e1712

e1714e1715

e2358

HORNS & COVERS

5-41

ciRcUit BReaKeRs

e2535

15 AMPRepl. oem74589-73

e2536

30 AMPRepl. oem74599-77

e2537

50 AMPRepl. oem74600-94

e2538

15 AMPRepl. oem74587-94

chRome coVeR With hoRn This custom horn includes a snap-on chrome cover and replaces the OEM horn on the top motor mount. May also be used for custom applications between frame downtubes or on splash guard, etc.h3343 12-volt custom horn

chRome eaRly style hoRnThis early style electric horn features a chrome grill. It’s universalbracket gives the versatility to be used for many 12v applications.e3150 Horn Repl. oem 69005-85t

For high note horns.e3930 ‘70-early 76 FL, FLH, FX & XLH, XLCH Repl. oem 69141-70e3400 L76-90 FX, L76-85 XL Repl. 69017-76

cUstom Billet hoRn By BadlandsMilled from 6061-T6 Billet, this horn is polished to a chrome-likefinish with openings milled through the faceplate so as not to interfere with sound quality and complement the lines of the V-Twin engine as well. Comes complete with chrome fasteners.h3549 Custom horn

e2541

40 AMP Repl. oem 74600-97a

chRome hoRn coVeRs

Universal Frame moUnting Bracket

5-42

GARAGE DOOR OPENER

OPEN YOUR GARAGE DOOR FROM YOUR BIKE

E2300 Universal Garage Door Opener for bikes and all other vehicles with chrome button E2301 Black Mounting bracket E2302 nickel Mounting bracket E2303 24” Extended Wiring KitE2304 10 pack with P.O.P. displayE2305 Universal door opener for rolling codeE2306 P.O.P. display only with E2300E2307 Black mounting clamp for E2305E2308 transmitter for E2305

• Works with all major brand of garage door and security gate operators

• Programs easily in minutes

• Attractive & compact design

• Easy & simple installation

installeD

2 ½”

B2302

B2303

B2301

Universal Frame moUnting Bracket