battery chargers inverters power inverters voltage

Power Conversion Solutions Power Conversion SolutPower Conversion Solutionson Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion Solutions Power Conversion Solutions Powe

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutionsolutions Power Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power ConPower Conversion Solutionswer Conversion Solutions Power Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conwer Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power CPower Conversion Solutions Power Conversion Solutions

Power Conversion Solutions PowerPower Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion SolutionsSolutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionPower Conversion SolutionsSolutions


Power CPower Conversion SolutionsPower Conversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power ConvePower Conversion Solutionser Conversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power Conversion Power Conversion Solutionsnversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Pow

PRODUCT GUIDE

An ISO 9001 Registered Company

BATTERY CHARGERS INVERTERS POWER INVERTERS VOLTAGE CONVERTERS

SOLAR CHARGE CONTROLLERS FREQUENCY CONVERTERS

Welcome to the Analytic Systems product guide. We hope this document gives you a clear picture of the range of products and capabilities we have developed over 30 continuous years in business.

Seven years of steady research and development effort focusing on Digital Signal Processor based products will result in a steady stream of new product announcements through this year and beyond. At the same time we have continued to improve our manufacturing processes to enhance reliability and lower the cost of ‘Made in Canada’.

I trust you will find the information you need in the pages of this guide, and of course our Sales and Engineering staff are always happy to answer any questions you may have.

Yours Truly,

James Hargrove, .P.EngCEO

FROM THE CEO OEM / CUSTOM DESIGN & MANUFACTURING

Analytic Systems has a long history of designing power electronics for specific applications and customers. Our unique advantage is that we control every step of the process in house, from concept to finished product: electrical design, mechanical design, software and firmware design, through to electrical and mechanical manufacturing. With us, your valuable proprietary information is safeguarded in our Controlled Goods Certified facility and security cleared personnel.

We have the design skills and resources to meet your requirements, whether it is a small modification of an existing product or an original custom design. Our modern manufacturing facilities support both volume production and quick easy changeover from one job to the next for efficient and accurate production of one piece or one thousand pieces.

ORDERING INFORMATION

ORDERING & PAYMENT

We accept purchase orders via:

Phone: 800.668.3884 (N. America) Email: [email protected]

604.946.9981 (Local & International) Fax: 604.946.9983

We accept: VISA | MASTERCARD | AMERICAN EXPRESS

SHIPPING

US Customers

CIF Delta, BC, Canada

1-day, 2-day and Ground Services available

Shipping is prepaid and added to your invoice (unless specified otherwise)

Analytic Systems pays the customs and duty into the United States (free domicile)

Canadian Customers

FOB Delta, BC, Canada

1-day, 2-day and Ground Service available

International Customers


Orders will be shipped according to customer requirements

Analytic Systems Ware Ltd. was founded in 1976 by Lloyd Hargrove, P.Eng. As the former chief civilian engineer for the underwater acoustics division of the Canadian Navy, Lloyd wanted his company to have the Anti-Submarine Warfare acronym ASW and coined the name Analytic Systems Ware. In 1993, he passed control of the company to his son James Hargrove, P.Eng. The company was the first to develop high frequency switching voltage converters for the Marine industry in 1976, and offered Pure Sinewave Inverters in 1994, years ahead of the competition.

In 2017, almost 32 years since it was founded, Analytic Systems has grown into a multi-faceted Power Electronics company serving the Industrial marketplace with a wide range of robust and highly reliable Power Supplies, Voltage Converters, Inverters, Battery Chargers, Frequency Converters and MPPT Charge Controllers. The company also proudly serves the Military and OEM marketplace with innovative designs to meet specific requirements. The company’s ‘Build in North America’ philosophy, combined with its Controlled Goods Directorate security certification ensure your needs and requirements will be met and that your precious Intellectual Property is secure in our hands.

ABOUT

OUR DIVISIONS

11 12

SPECIAL SERVICES

Analytic Systems | Head office | Delta, BC, Canada

Metal Action MachiningCNC Machining | CAD | Camwww.MetalActionMachining.com

Race Energy PerformanceProducts for the Motorsport Industrywww.RaceEnergyPerformance.com

Scott Hargrove MotorsportsCanada’s next Indycar star!www.ScottHargrove.com

[email protected] 604.946.9981 | 800.668.3884 www.analyticsystems.com

ANALYTIC SYSTEMS CUSTOMERS

An ISO 9001 Registered Company An ISO 9001 Registered Company

WELCOME

3An ISO 9001 Registered Company


LEAN MANUFACTURING

ISO 9001:2008& AS9100 ABS

CERTIFIED

CONTROLLED

GOODS CERTIFIED

ANALYTIC SYSTEMS

WHY CHOOSE ANALYTIC SYSTEMS

CONTACT US

RUGGED & RELIABLE

OVER30YEARSEXPERIENCE

FLEXIBLEDESIGN

Analytic Systems is an innovative Canadian manufacturer of power conversion products. We designed our first Switchmode DC-DC Voltage Converter in 1976 and today we design and build a complete range of products including Battery Chargers, Voltage Converters, Inverters, Power Supplies, Frequency Converters and MPPT Solar Charge Controllers.

All of our products are manufactured in our own ISO9001 certified state of the art facilities located near Vancouver, BC, Canada that include the latest automated Surface Mount Technology, CNC conformal coating and transformer manufacturing. In a separate facility, we CNC machine billet enclosures, extruded enclosures and heat sinks from aluminum, copper, brass, bronze and titanium. All of our facilities are Controlled Goods Directorate certified for security.

At Analytic Systems, we know that the reliability of our systems not only depend on the quality of the design and manufacture, but also in the way we support our products. All products are designed to meet or exceed many international testing standards including CSA, UL, ABS and CE. We are experienced in working with Military standards including MIL461 (EMC) and MIL810 (environmental).

Whether you need marine, industrial, telecom, COTS or MILSPEC, one unit or a thousand, we can do it. Call or email us today with your unique requirements!

BUILT TO

LAST

4 An ISO 9001 Registered Company

MARKETS SERVED

COTS

MARINE

UAS

Analytic Systems has a long history of meeting the needs of Western military organizations. From power supplies for MBU field kitchens, to inverters for portable command centers, to battery chargers for firing TOW missiles and ground power stations for Shadow UAV control centers, we have done it all.

Our facilities and personnel are Canadian Controlled Goods Directorate certified, permitting us to work with ITAR certified prime contractors. We are experienced in designing for and meeting MIL461 (EMC), MIL 810 (Environmental) and many other military standards. In house testing capabilities include conducted and radiated emissions, electrostatic discharge, vibration and temperature.

MARINE

Analytic Systems began in the marine market, with the first 32 to 12 volt Switchmode DC-DC voltage converter designed in 1976 by founder Lloyd Hargrove specifically for powering 12V 150 Watt SSB radios directly from 32V engine starting batteries.

Today we manufacture a full line of marine grade power conversion products including step-up and step-down DC to DC Voltage Converters from 60 to 1500 Watts, Multi-Bank Programmable Battery Chargers for 12, 24 and 32 volt batteries up to 100 Amps and Pure Sine Wave DC to AC Inverters from 12, 24 or 32 volt batteries up to 3000 Watts.

MILITARY

STEEL MILL

MINING

UTILITIES

OIL & GAS

INDUSTRIAL

From steel mills, to mines, to power generating stations, to the warehouse floor, Analytic Systems understands the industrial market. Our Inverters, DC-DC Converters, Battery Chargers, Power Supplies and Frequency Converters are designed from the ground up to meet the needs of these tough environments.

Modern designs, heavy duty filtering, over-rated components, 100 percent conformal coated circuit boards, heavy gauge anodized or powder coated aluminum chassis with stainless fasteners combine into reliable, efficient and durable power products that will provide years of service.

INDUSTRIAL


TELECOM

SATELLITE COMMUNICATION

TWO-WAY RADIO

CABLE TELEVISION

TRANSIT

TRUCKING

RAIL

SOLAR ENERGY

WIND POWER

HYDROPOWER

MARKETS SERVED

TELECOM

TRANSPORTATION

ALTERNATIVE ENERGY

Analytic Systems manufactures a wide range of products to meet the needs of Telecom, Cable Television, Two-Way Radio and Satellite Communications providers. Our complete line of rack mount AC-DC power supplies, DC-DC voltage converters, battery chargers and inverters are rugged and reliable. Features include bright LED displays for voltage and current, Canbus or RS422 communications and parallel operation for increased power.

From rail side communications enclosures to the Central Office we can meet your needs for voltage (input or output) current, efficiency, temperature, humidity, emissions and vibration.

The transportation environment, whether truck, bus or train is the most unforgiving, with extremes of vibration, heat, dirt, dust and moisture.

Analytic Systems has a proven track record with customers such as Metra, BART, Santiago Subway System, Massachusetts Transit, CSX, BNSF, CP Rail, Harsco Track and CN Rail of building Battery Chargers, Power Supplies, Inverters and Voltage Converters, both off the shelf and fully custom designed that stand up to the extreme rigors of this demanding market.

Stainless Steel or Aluminum weatherproof enclosures, corrosion proof hardware, conformal coated circuit boards and conservative design add up to just one thing – Reliability!

Whether you produce electricity from Wind Turbines, Solar Panels or Small Scale Hydro Electric systems, the power needs to be stored in battery banks without wasting a watt.

Analytic Systems’ patented MPPT Charge Controllers handle open circuit input voltages to 200 Volts and pump out up to 100 amps into battery banks up to 48 VDC. A full line of high efficiency DC-AC Inverters and DC-DC Voltage Converters up to 3000 watts output allow the stored energy to be used for any desired purpose. Aluminum enclosures, stainless fasteners, conformal coated circuit boards and conservative components ensure long life and reliability.


IBC320

BCD1505

BCA1000

BATTERY CHARGERS

Analytic Systems manufactures a wide range of battery chargers that operate from either AC or DC power sources. All models feature heavy EMI filtering to minimize conducted and radiated emissions, preventing interference with sensitive communications equipment. Other features include no-spark battery connection, reverse battery hookup protection and adjustable float and absorption voltages.

Next generation IBC series chargers are fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 240 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power. Four charging profiles are available with easy front panel selection to handle most types of batteries from traditional Lead Acid, Sealed Lead Acid and even Lithium Ion. The free to download ‘Power Wizard’ software allows full programming and selection of each of the four profiles from a laptop computer. 300 Watt models for 1 or 2 banks of batteries are available now for battery voltages of 12, 24, 28, 32, 36 or 48 VDC.

Traditional BCA series chargers feature precision charging voltages for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72 VDC. Models are available to operate from 110VAC or 220VAC or auto-switching between either voltage at 50, 60 or 400 Hz. Power levels range from 300 to 1500 watts. All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.

Traditional BCD & BCH series chargers feature precision charging voltages for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72 VDC. Models are available to operate from input voltages as low as 10 VDC and up to 400 VDC at power levels from 60 to 1500 watts. Most models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and userinitiated equalization for optimum charging and maximum battery life.Various models feature either common ground for lower cost or full isolationwhere different ground levels need to be accommodated (ie. Charging apositive ground battery from a negative ground source or vice-versa).

AC SOURCE CHARGERS

DC SOURCE CHARGERS

7An ISO 9001 Registered CompanyVTC120

VTC310

VTC310

VCH10

VOLTAGE CONVERTERS

Analytic Systems manufactures two different kinds of DC-DC Voltage Converters. The first is Common Negative, where the input and the output share the same ground. These do not typically use a transformer and are less expensive to build. Models are available to step-down (Buck), step up (Boost), or a combination of step down and step up (Buck-Boost). The second is Isolated, where a high frequency transformer is used to provide electrical isolation between input and output. These are typically used where there are different grounds for the input and output voltages, or if there is a large difference between the input voltage and output voltage.

Step down VCH10, VTC140, VTC180, VTC240, VTC300 and VTC600 models from handle up to 100 VDC input, stepping down to 12 to 48 VDC with power ranges 90 to 600 watts . Step up VTC305 and VTC605 models stabilize a 12V system, or step 12VDC up to 24 or 32 VDC with power ranges of 300 to 600 watts. Buck-Boost models for 18 to 30VDC input to 24VDC output are available by request.

Models from 300 watts to 1500 watts in both shelf and rack mount. Low input voltage VTC315, VTC615 and VTC1015 models handle input voltages from 24 to 72VDC. High input voltage VTC310, VTC610, VTC1000 and VTC1505 models handle input voltages from 100 to 400 VDC. All models have output voltage ranges from 12 to 48 VDC. Bright easy to read LED voltage and current meters are an available option on most models.

Also available is a hybrid VTC120i model that features transformer isolated 12 or 14 VDC Input and 5, 12 or 24 VDC Output with a 5 amp (VTC120i) or 7 amp (VTC120ih) linear post-regulator for the lowest ripple and noise.

FULLY ISOLATED

COMMON NEGATIVE


IPSi2400

IPS300MW

IPSi3000MW

IPSi1200 IPSi3600

Analytic Systems has been producing Pure Sinewave Inverters since 1994. Originally designed for running navigation computers on commercial and fishing vessels, the IPS Series has evolved into the IPSi Series (Digital Signal Processor) DSP controlled models (compact toroidal transformer which translates to 20 percent more power) with power outputs from 300 to 3600 Watts.

Using the free “Power Wizard” software, the user can select output frequency, voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface.

Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), over temperature de-rating and shutdown and low input voltage warning and shutdown. Northrop Grumman choose the Analytic Systems inverters for their Army portable command centers for their ruggedization and extra low EMI levels.

MS COTS Model shown with military connectors

Our line of Sealed Pure Sine Inverters (IPSi series) are IP67 rated are designed for rugged operating conditions where water and dust protection are required. Two models are offered initially, the 300 wattI IPS300MW and the 3000 watt IPSi3000MW. Their waterproof construction also makes them ideal for locations where C1D2 certification is required *Note – these units are not C1D2 certified, but are suited for applications that would obtain C1D2 certification. We have many customers that put our products inside C1D2 enclosures.

INVERTERS

NEW! SEALED CHASSIS*


PWS1505 PWS240 PWS1000

The PWS series power supplies designed and produced by Analytic Systems are specifically designed for the commercial, industrial and COTS military markets. Power levels range from 120 to 1500 watts with auto ranging 110 and 220 VAC inputs and available output voltages from 12 to 72 VDC. Standard safety features include over temperature protection, current limiting, short circuit protection and output overvoltage protection.

As these units are intended for unattended installations, they will auto recover from any protection shutdown without user intervention, unless suffering from an outright failure.

POWER SUPPLIES

I just wanted to say WOW! The custom power supply /voltage converter combo exceeded our expectations and it is a perfect fit for our case. We should have it powered up next week.

John Tighe, Lockheed Martin, California

Our PWI series of power supplies offered at 300 watts of output power, has the Power Factor Corrected input allowing for operation from any AC voltage worldwide from 85 to 240 VAC at either 50 or 60 Hz. Full Digital Signal Processor control allows precision adjustment, but also maximum flexibility with user adjustable output voltages and currents.

Output voltages from 12 to 48 VDC are available. These power supplies are designed to work with our ‘Power Wizard’ software that is free to download, which adds full diagnostics, user adjustability and data logging capabilities via the built in USB port.


BCD610R

RACKMOUNT UNITS

DC CHARGERS

AC CHARGERS

VOLTAGE CONVERTERS

POWER SUPPLIES

Analytic Systems has developed a 2U 19 inch rack mount chassis that many of our power boards are designed to fit. The 2U height was selected as it allows the most flexibility in the selection of capacitive and inductive components for better performance. Both our BCA and BCD series battery chargers are available in 600 and 1000 watt models, as are our isolated VTC Voltage Converters and PWS series Power Supplies.

All our rack mount models feature bright and accurate 1 inch high LED readout of voltage and current that is readable from across the room in any lighting condition from daylight to full darkness. The rack mount version is identified by the letter R after the power designation, ie. PWS1000R.

One option that is only available in our rack mount voltage converters and power supplies is a battery backup option, where we fit a 1 amp trickle charger into the chassis, that is connected to an external battery. If the power input fails, the battery will seamlessly take over supplying the load until power is restored.

We also have a 1300 watt fully isolated low voltage DC-DC voltage converter named the VTC1315R. Input voltages of 24 and 48 VDC are available with output voltages of 12V at 100 Amps, 24V at 50 Amps and 48V at 25 Amps. Also available is a battery charger version called the BCD1315R with the same input and output voltage ranges for up to 2 banks of batteries.

We did some trials during our last exercise in Gagetown with the modified unit. The battery charger (BCA1505MSP-110-24NC) worked all day every day and the operator had no problem at all with the unit. My technician tried simultaneously as many components as possible in the vehicle to verify the unit in the worst case scenario and again no problem at all. I would recommend that other unit be purchase for the other vehicle. Other Canadian Forces units would greatly beneficiate of those units, for the reasons we discussed.

Sgt. Francis Sévigny Défense Nationale | National Defence

Welcome to the Analytic Systems product guide. We hope this document gives you a clear picture of the range of products and capabilities we have developed over 30 continuous years in business.

Seven years of steady research and development effort focusing on Digital Signal Processor based products will result in a steady stream of new product announcements through this year and beyond. At the same time we have continued to improve our manufacturing processes to enhance reliability and lower the cost of ‘Made in Canada’.

I trust you will find the information you need in the pages of this guide, and of course our Sales and Engineering staff are always happy to answer any questions you may have.

Yours Truly,

James Hargrove, .P.EngCEO

FROM THE CEO OEM / CUSTOM DESIGN & MANUFACTURING

Analytic Systems has a long history of designing power electronics for specific applications and customers. Our unique advantage is that we control every step of the process in house, from concept to finished product: electrical design, mechanical design, software and firmware design, through to electrical and mechanical manufacturing. With us, your valuable proprietary information is safeguarded in our Controlled Goods Certified facility and security cleared personnel.

We have the design skills and resources to meet your requirements, whether it is a small modification of an existing product or an original custom design. Our modern manufacturing facilities support both volume production and quick easy changeover from one job to the next for efficient and accurate production of one piece or one thousand pieces.

ORDERING INFORMATION

ORDERING & PAYMENT

We accept purchase orders via:

Phone: 800.668.3884 (N. America) Email: [email protected]

604.946.9981 (Local & International) Fax: 604.946.9983

We accept: VISA | MASTERCARD | AMERICAN EXPRESS

SHIPPING

US Customers

CIF Delta, BC, Canada

1-day, 2-day and Ground Services available

Shipping is prepaid and added to your invoice (unless specified otherwise)

Analytic Systems pays the customs and duty into the United States (free domicile)

Canadian Customers


1-day, 2-day and Ground Service available

International Customers


Orders will be shipped according to customer requirements

Analytic Systems Ware Ltd. was founded in 1976 by Lloyd Hargrove, P.Eng. As the former chief civilian engineer for the underwater acoustics division of the Canadian Navy, Lloyd wanted his company to have the Anti-Submarine Warfare acronym ASW and coined the name Analytic Systems Ware. In 1993, he passed control of the company to his son James Hargrove, P.Eng. The company was the first to develop high frequency switching voltage converters for the Marine industry in 1976, and offered Pure Sinewave Inverters in 1994, years ahead of the competition.

In 2017, almost 32 years since it was founded, Analytic Systems has grown into a multi-faceted Power Electronics company serving the Industrial marketplace with a wide range of robust and highly reliable Power Supplies, Voltage Converters, Inverters, Battery Chargers, Frequency Converters and MPPT Charge Controllers. The company also proudly serves the Military and OEM marketplace with innovative designs to meet specific requirements. The company’s ‘Build in North America’ philosophy, combined with its Controlled Goods Directorate security certification ensure your needs and requirements will be met and that your precious Intellectual Property is secure in our hands.

ABOUT

OUR DIVISIONS

11 12

SPECIAL SERVICES

Analytic Systems | Head office | Delta, BC, Canada

Metal Action MachiningCNC Machining | CAD | Camwww.MetalActionMachining.com

Race Energy PerformanceProducts for the Motorsport Industrywww.RaceEnergyPerformance.com

Scott Hargrove MotorsportsCanada’s next Indycar star!www.ScottHargrove.com


ANALYTIC SYSTEMS CUSTOMERS

An ISO 9001 Registered Company An ISO 9001 Registered Company

WELCOME

An ISO9001 Registered Company

Power Conversion Solutions Power Conversion SolutPower Conversion Solutionson Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion Solutions Power Conversion Solutions Powe

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutionsolutions Power Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power ConPower Conversion Solutionswer Conversion Solutions Power Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conwer Conversion Solutions Power Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power CPower Conversion Solutions Power Conversion Solutions

Power Conversion Solutions PowerPower Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion SolutionsSolutions



Power CPower Conversion SolutionsPower Conversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power ConvePower Conversion Solutionser Conversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Power Conversion Power Conversion Solutionsnversion Solutions Power Conversion Solutions Power Conversion SolutionsPower Conversion Solutions

Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Power Conversion SolutionsPower Conversion Solutions Pow

An ISO 9001 Registered Company

BATTERY CHARGERS INVERTERS POWER SUPPLIES VOLTAGE CONVERTERS

SOLAR CHARGE CONTROLLERS FREQUENCY CONVERTERS

back page

8.5 x 11

8128 River Way, Delta BC V4G 1K5 t. 604.946.9981 f. 604.946.9983 tf. 800.668.3884www.analyticsystems.com

PRODUCT GUIDEPART NUMBERS

5 ELECTRICALOUTPUT

12 > 12 volts 110 > 110 volts

24 > 24 volts 220 > 220 volts

2POWER LEVELREQUIREMENT

1000 > 1000 watts

1500 > 1500 watts

100 > 100 amps (SMP SOLAR CHARGERS ONLY)

300 > 300 watts

600 > 600 watts

NOTE: The last two digits of the power level are model specific - your sales manager will assist you.

ELECTRICALINPUT4 12 > 12 volts 110 > 110 volts

24 > 24 volts 220 > 220 voltsNOTE: No input voltage for IBC series, as it is universal AC input.

HOW TO BUILD A STANDARD ANALYTIC SYSTEMS PRODUCT PART NUMBER

6 PWS1000R-110-24PART NO.EXAMPLE

1 SELECT THE PRODUCT TYPE

BCA > AC BATTERY CHARGER

BCD > DC BATTERY CHARGER

IBC > AC INTELLIGENT BATTERY CHARGER

VTC > VOLTAGE CONVERTER

IPS > PURE SINE INVERTER

SPS > SEALED PURE SINE INVERTER

PWS > POWER SUPPLY

SMP > SOLAR CHARGER MPPT

FCA > FREQUENCY CONVERTER

3 SPECIALOPTIONS

R > Rack Mount

B > Battery Backup Option (Rack Mount only)

DM > Bright LED Digital Volt / Amp Meter

H > High Output (VTC120 Series Only)

NOTE: Small sample of available Special Options - your sales manager will assist you.

battery chargers inverters power inverters voltage

Documents