battery charging room catalogo
DESCRIPTION
TM TM solutions for your battery handling needs from EnerSys, the professionals you know and trust. 2 For additional information see the OSHA home page at www.osha.gov 1910.178(g)(6) refers to diluting pure acid with water. A properly designed, manufactured and maintained lead-acid battery already contains diluted acid and therefore it is safe to add water to the battery. TMTRANSCRIPT
TMTM
EnerSys World Headquarters
2366 Bernville Rd., Reading, PA 19605
1-800-ENERSYS
www.enersysmp.com
Section 84.50Rev.CPrint date 4/07
TM
We are so confident in our products, capabilities, and expertise that we offer the strongest guarantee in the industry. We call it the Power of PRO Series.
The Power of the largest industrial battery manufacturer in the world…
The Power to provide the most complete and varied battery handling product line in the industry…
The Power to service with hundreds of factory service representatives, dedicated manufacturer’srepresentatives, and PRO Series distributors in North America…
The Power to maintain the best products, the best service, and the most expertise at competitivepricing to help you maximize your battery handling and maintenance resources…
The Power to change an industry with unique and innovative ways to ensure safe, efficientand environmentally friendly products…
EnerSys warrants all PRO Series battery handling equipment to be free from defects in material andworkmanship under normal and proper use, operation, and maintenance for a period of 12 months with these terms and conditions:
a) Wearable items such as belts, hoses, wheels, vacuum cups, etc. are warranted for 3 months.b) Electro-magnets are warranted an additional 48 months for a total coverage of 60 months.c) Replaceable items such as bulbs, filters, fuses, etc. are not covered unless defective prior to use.d) Does not cover damage or defects caused by overloading, abuse, misuse, accidents,
misapplication of products, or failure to follow operation or maintenance instructions.
While we can’t protect against misuse or neglect, we can minimize their effects by offering safetyand operator training, preventive maintenance agreements, and serving as your complete motivepower battery consultant. Isn’t it time you realize the Power of PRO Series?
Talk to your favorite PRO Series representative to find out if PRO Series is right for you.
The PRO Series Guarantee
All copyrights reserved.All trademarks are the property of or licensed to EnerSysexcept Nelsonized, which is not the property of EnerSys.
TMTM
Facts to know to help you takecharge of your changing needs.
For additional information see the OSHA home pageat www.osha.gov2 19
Power Distribution Panel
Power Distribution Panel
The PS-PDP is the smart way to distribute power to your battery chargers in a battery changing system.The unique modular design allows you to pre-wire your battery racks with an easy to install distributionpanel. Each panel is designed to accommodate four, six or eight chargers with one AC input.
By eliminating the need to pull wire from the main electrical panel to each charger, you will reduce yourneed for large breaker panel systems and all of the circuit breakers needed to run such a system. We havefound that it is less expensive to wire a system using the PS-PDP as this work is done in the field on a timeand materials basis.
PRO Series
Battery Handling Equipment
As the world's largest manufacturer ofindustrial batteries, we know the valueand importance of providing you withsuperior products — and we deliver!With an innovative and wide-rangingproduct offering, including our line ofstackers, changers and wash racks,PRO Series will meet all of yourbattery handling tasks. No matter thesize of your operation, EnerSys has asolution perfect for your specificneeds. With the largest network offactory-trained personnel andmanufacturer's representatives inNorth America, our knowledgeablestaff will find a PRO Series productthat is right for you. From batteries andchargers to environmental and safetyissues, EnerSys is your one source forsolutions for all your motive powerbattery needs. EnerSys and PRO
Series offer Power/Full Solutions fortoday's energy demands.
Powerful ideas and powerful
solutions for your battery
handling needs from EnerSys, the
professionals you know and trust.
29 CFR 1910.132(d) PPE hazard assessment and equipment selection.
The employer shall assess the workplace to determine if hazards arepresent, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, orlikely to be present, the employer shall:
(i) Select, and have each affected employee use, the types of PPE thatwill protect the affected employee from the hazards identified in thehazard assessment;
(ii) Communicate selection decisions to each affected employee; and,(iii) Select PPE that properly fits each affected employee.
29 CFR 1910.151 Medical services and first aid.
(a) The employer shall ensure the ready availability of medical personnelfor advice and consultation on matters of plant health.
(b) In the absence of an infirmary, clinic, or hospital in near proximity tothe workplace which is used for the treatment of all injured employees, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available.
(c) Where the eyes or body of any person may be exposed to injuriouscorrosive materials, suitable facilities for quick drenching or flushingof the eyes and body shall be provided within the work area for immediate emergency use.
29 CFR 1910.178(g) Changing and charging storage batteries.
(1) Battery charging installations shall be located in areas designated forthat purpose.
(2) Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and for adequate ventilation for dispersal of fumes from gassing batteries.
(3) [Reserved](4) A conveyor, overhead hoist, or equivalent material handling
equipment shall be provided for handling batteries.(5) Reinstalled batteries shall be properly positioned and secured in the
truck.(6) A carboy tilter or siphon shall be provided for handling electrolyte.(7) When charging batteries, acid shall be poured into water; water shall
not be poured into acid.(8) Trucks shall be properly positioned and brake applied before
attempting to change or charge batteries.(9) Care shall be taken to assure that vent caps are functioning. The
battery (or compartment) cover(s) shall be open to dissipate heat.(10) Smoking shall be prohibited in the charging area.(11) Precautions shall be taken to prevent open flames, sparks, or electric
arcs in battery charging areas.(12) Tools and other metallic objects shall be kept away from the top of
uncovered batteries.
1910.178(g)(6) refers to diluting pure acid with water. A properly designed,manufactured and maintained lead-acid battery already contains diluted acidand therefore it is safe to add water to the battery.
Note: This regulatory information is intended to provide a helpful summary ofselect federal labor regulatory provisions governing lead-acid batteries and isnecessarily limited in nature. It is not intended to provide, and should not beinterpreted as providing, legal advice with respect to any specific matters andshould be used only as a point of departure for individual legal evaluationof federal, state and local requirements that may apply to your operations.
Features
• Single AC input feeds 4 - 8 chargers
• Requires less wire and smaller conduits
• Requires smaller main distribution panel and fewer breakers
• Isolated circuits
• Twist lock connectors included
Model # PSPDP-(X)- (Y ) eg. PSPDP-6-20-1825
4X 6
8
20-610 4.5 - 10 ampsY 20-1320 11 - 17 amps
20-1825 18 - 20 amps30-2332 21 - 30 amps
** All at 480 Volts 3 Phase
AC Amperage Per charger ** AC Amperage Per charger ** AC Amperage Per charger **
4 Circuits In Panel6 Circuits In Panel8 Circuits In Panel
AC Amperage Per charger **
Sizing Information
TMTM
18
Accessories
Charger Cable RetractorModel PSCR-1
Charger Cable Retractor
Features
• Molded suspender holds
cables securely in place
• Oil tempered spring will not
kink or take permanent set
• Snubber chain restricts
spring back movement
• Rugged 5/8" threaded stud
Model Capacity OL Batteries BH* Adjustable in 3" increments
PSBEAM-4PL 4000 lbs. 43" 21" to 42" long 24" to 39"PSBEAM-6PL 6000 lbs. 47" 25" to 46" long 28" to 43"
Standard beam height =15”*BH dimensions with hooks in vertical position. Each hook may be angled 1 1/2” open or closed safely. All dimensions shown are nominal and subject to change. Add “-EX” for Superhog Hook option.
Model PSBEAM-6PL
Battery Station with Rollers
Battery Lifting Beam
The battery lifting beam offers a heavy duty non-conductivemethod of lifting batteries. The non-slip hook design fitssnugly into most battery lifting holes.
3
Table of Contents
Select OSHA Regulations ............................................................................2
Section One: Side Removal SystemsPortable Side Removal..........................................................................5Battery Transporter...............................................................................6Portable Changer ..................................................................................8PRO Changer ........................................................................................8Single Level Adjustable Racks ..............................................................9PRO Stackers ......................................................................................10
Section Two: Overhead Removal SystemsGantry Cranes .....................................................................................12Battery Stations...................................................................................13Overhead Transporters........................................................................13
Section Three: Battery CleaningBattery Wash Cabinets ........................................................................14Recirculating Water System.................................................................15Battery Wash Racks ............................................................................15
Section Four: AccessoriesSafety and Service Equipment ............................................................16Fork Attachment .................................................................................17Wall Mounted Charger Bracket............................................................17Floor Mounted Charger Stand .............................................................17Charger Cable Retractor......................................................................18Battery Lifting Beam ...........................................................................18Power Distribution Panel......................................................................19
Battery Handling Equipment CatalogBattery Handling Equipment Catalog
General Notes
· All products illustrated are
current as of the publication
of this brochure.
· All dimensions shown are
nominal and subject to
change without notice.
· EnerSys reserves the right to
make changes and
modifications
without notice.
· Contact EnerSys for
additional details.
Standard hooks with Posi-latch safety mechanism.
The EnerSys Superhog hook is designed for batterycases that have reinforced battery lifting holes.Hooks come with the Posi-latch safety mechanism,shown without for illustration purposes only.
All EnerSys hooks comestandard with the Posi-latchsafety mechanism.
Model PSF8053ASSY
Model PSF9152ASSY
TMTM
4
Side Removal Systems
When it comes to battery changing equipment andsystems, industries around the world come toEnerSys. That’s because EnerSys is uniquelyqualified to help companies like yours meet thechallenge of battery changing both now and in thefuture. Utilizing EnerSys’ team of engineers,designersand sales and service professionals, youcan take charge of your changing needs withefficient, dependable systems designed for anyworkload and budget.
With EnerSys products, you’re assured of state-of-the-art, long-lasting equipment and systemsdesigned with safety in mind that deliver increasedproductivity for many years to come. EnerSysunderstands that your facility will grow, so wedesign our systems to be expandable — to growright along with you.
Whether your electric truck fleet is small or large,EnerSys has a side removal system that’s right foryour application. Our portable changing systemsinclude the non-powered push pull. If yourchanging needs require a powered portablesystem, consider an EnerSys portable changer.
PRO STACKER
Larger fleets demand more power, and EnerSys’industry-standard PRO Stacker is your solution.PRO Stackers provide a safe, dependable way tochange batteries quickly and efficiently withoutoperator fatigue. EnerSys PRO Stackers areavailable in single or double compartment modelsand from a single level up to a six-high system.This allows for the most efficient use of your floorspace and budget.
Wash Rackwith Rollers
WateringGun
Shower/Eye Wash
Assembly
Stand Mounted Guide Channel
Battery Station with Rollers
PRO Stacker(see page 10)
Single level PRO Stacker application
Replacing a battery
17
Accessories
Fork AttachmentModel PS-600081S
Used with Battery Handling Beam for battery removal
Features
• 48" safety chain and hook
• Swivel hook with safety latch
• Fork openings – 1 5/8" x 6 1/2"
• 6000 lb. capacity
All dimensions shown are nominal and subject to change.
Model OW
PSCS-24 24"PSCS-36 36"PSCS-72 72”
Charger Stands
Charger Wall BracketModel PSCWB
One set fits standard chargers
Option
Bracket for charger cable is PS12-0001-284.
TMTM
Portable EyewashModel PSPEW-700
Features
• 15 minute wash
• Stay-open valve
• ABS dual stream head with
pop-off covers
16
Accessories
Shower Eyewash AssemblyModel PSSEW-500Features
• Large stainless steel pull rod actuator
• Self-adjusting regulator to assure a
constant, even flow
• Galvanized piping
• ABS dual stream head with
pop-off covers
EyewashModel PSEW-300
Features
• Large stainless
steel push plate
• Self-adjusting
regulator to assure
a constant, even flow
• ABS dual stream head
with pop-off cover
Safety and Service Equipment
5
Side Removal Systems
Portable Battery ChangersEnerSys PRO Series DC powered portable batterychangers offer safety and flexibility at an economicalprice.
Battery Stations with Rollers
Wash Rackwith Rollers
Battery Transfer Cart withMechanical Loader
Wash Rackwith Rollers
PRO Changer
Battery Stations withRollers
Battery Transfer Cart with Mechanical LoaderEnerSys PRO Series non-powered battery changer isdesigned for smaller lift truck fleets that need easierbattery changing.
Using the PRO Changer
Battery Transfer Cart application
Model PSWG-1
Features
• Eliminates excess spillage of water
• Lightweight and can be operated with just one hand
• Saves battery filling time
• Auto shut-off
Watering Gun
Safety KitModel PSPK-1200
Kit IncludesChemical resistantface shield withpolycarbonate window.The adjustable ratchetheadgear ensures asecure comfortable fit.Acid apron ispolyester double-coated with PVC.One size apron neckstrap and waist tiesare adjustable.Gloves are nitrile acidresistant, with comfortcurved finger andhand design.
TMTM
6
Side Removal Systems
Battery Transfer Carts with Mechanical Loader
Features
• Adjustable roller bed height
• Foot operated jack
• Floor lock
• Push/pull plate mechanically driven
• Composite wheels
• Battery safety stop
• Spring loaded rollers
• Adjustable chain to secure transfer
cart to side of truck*
Options
• Powered push/pull and lift
• Low profile for 3" load-in height
Model Maximum Battery Width Capacity Height
PSBTC-16MPP 15" 2000 lbs. 6"-22"
PSBTC-24MPP 21" 3000 lbs. 6"-30"
PSBTC-30MPP 30" 3000 lbs. 7"-30"
Available Models
15
Battery Cleaning
Model PSRNS-1 Recirculating Water SystemThe PSRNS-1 combines stainless steel construction withease of operation. You get a constant flow of water thatis filtered, pH monitored and recirculated, reducing yourenvironmental concerns.
The system features a single on/off switch and a singlerecirculating control switch and requires no toxicchemicals.Features
• 150 gallon reservoir
• 12 G.P.M. @ 50 P.S.I.
water flow
• 120 volt primary
voltage
• 12 volt sump pump
• Automatic low
pH shut off*
• Dual cartridge
supply line filters
• Trash screen on
sump drain
• Eliminates all
drain requirements
• Requires no toxic
chemicals
• Safe and easy to
operate
• Works with wash
cabinets or wash racks
• Automatic or manual operation
Option
• 300 gallon reservoir
Model PSPWS-R-SSWash Rack with Rollers
Dimensions 52 7/32" wide57" long55 1/8" high12 1/2" to top of rollers
Battery Wash Racks
Model PSPWS-OH-SSOverhead Load Wash Rack
Dimensions 52 7/32" wide57" long55 1/8" high
Model PSRNS-1 auto injection system
EnerSys’ economical wash racks are acid resistant forlong life and reduced maintenance.
All dimensions shown are nominal and subject to change.
*Requires safety attachment supplied by customer to securetransfer cart to truck when changing battery.For low profile add “LP” to model number. (Not available on PSBTC-30MPP)
PRO Series Quick Changer
The inexpensive alternative topower transfer carts
Model Maximum Battery Width Capacity Height
PSQC-24 24" 3000 lbs. 60.5"
PSQC-36 36" 3500 lbs. 60.5"
Available Models
* Fork pockets are available for standard sizes 27”x 42” or 48” in length.* 9” fork width.For powered push/pull please consult factory. Quick Changer mounted ontypical pallet truck adjusts from 6” to 12” in height.
Features
• Manual battery extraction
• Heavy duty rollers
• Durable powder coat finish
Option
• Fork pockets for use on multiple trucks*
Model PSRNS-1*Requires liquid neutralizer PSLNC
or equivalent for pH balancing.
TMTM
14
Battery Cleaning
Battery Wash CabinetsPrevent buildup of acid on batteries forreduced maintenance and longer life.With all stainless steel construction, EnerSys PROSeries Wash Cabinets are designed for long-lastingdependability. The rollers’ stainless steel shaftsrotate in the Nelsonized® hardwood bearing framethat eliminates roller bearings in the harsh cleaningenvironment of the wash cabinet.
The two panel door allows these cabinets to fit intoareas with overhead obstructions as low as 9 feet.The new door is easy to maintain while the multi-directional air and water nozzles let you adjust forthe variety of batteries in your facility.
Multi-directional air and water nozzles; Non-metallic air and water lines
Rotary bottom scrubber
Options
• Rotary bottom scrubber
• Powered rollers (for front loading)
Wash Cabinet Model WCA-SS
Features
• Stainless steel construction and roller shafts ensure durability
• Nelsonized® hardwood bearing frame and non-metallic air and
water lines provide trouble free operation
• Chemicals not required
• Multi-directional air and water nozzles rinse batteries in a
totally enclosed environment
• Adjustable wash cycles
• Air curtain removes excess water
• 120 volt primary voltage with 12 volt DC secondary voltage
• Built-in drain tray with 1" pipe coupling removes sediment
• Systems designed to accept PSRNS-1 sump pump in drain tray
Utilities and air provided by customer.
7
Side Removal Systems
Battery Station with Rollers
*45" deep units available. Add “-45” to model number.To order without shelf add “-LCS” to model number.‘R’ = Desired height of rollers above floor. Minimum of 5".Must specify. i.e. R=7”Adjustable Height Plus or Minus 1 1/2".All meet OSHA requirements.
Battery Station with Rollers
Features
• Heavy-duty construction
• Non-conductive roller bed
• Spring loaded rollers
• Adjustable legs
• Battery safety stops
• 800 lb. capacity charger shelf
• Models for all battery sizes
Battery Service Station
Features
• Heavy-duty construction
• Non-conductive roller bed
• Spring loaded rollers
• Adjustable legs
• Battery safety stops
• 2.5" diameter roller
Model Roller Width Outside Width (OW)
PSBS12-2 12" 26"PSBS15-2 15" 32"PSBS18-2 18" 38"PSBS21-2* 21" 44"PSBS24-2* 24" 50"PSBS27-2 27" 56"PSBS30-2 30" 62"PSBS33-2 34” 70”
Two-Compartment
Model Roller Width Outside Width (OW)
PSBS12-3 12" 39"PSBS15-3 15" 48"PSBS18-3 18" 57"PSBS21-3* 21" 66"PSBS24-3* 24" 75"PSBS27-3 27" 84"PSBS30-3 30" 93"PSBS34-3 34” 105”
Battery Service Station
Three-Compartment
Model PSBSS-21
Model PSBSS-15
Model Roller Width Outside Width (OW)
PSBSS-15 15" 15 3/4PSBSS-21 21" 21 3/4
R = roller height Available from 5" to 14"
All dimensions shown are nominal and subject to change without notice.
EnerSys PRO Series Battery Wash Cabinet combines withthe Recirculating Water System to form a complete,closed-loop battery cleaning system.
For more information on the Recirculating Water System,please refer to page 15.
Model PSBSS-21
TMTM
All equipment available with magnet.
13
Overhead Removal Systems
Battery Station with Acid-Resistant InterlayMeets OSHA requirements.
Battery Stations available less charger shelf. Add “-LCS” to model number.
Features
• Acid-resistant charging surface
• Corrosion-resistant spacers
• Heavy duty construction
• 800 lb. or 1600 lb. capacity charger shelf (see chart)
Overhead Transporter with Acid-Resistant Interlay
Model Width
PSHBS-30* 32"PSHBS-42** 44"PSHBS-60** 62"PSHBS-72** 74"PSHBS-84** 86"PSHBS-100*** 102"PSHBS-120*** 122"PSHBS-144*** 148"
*Interlay runs front to rear (standard)**Available with left to right interlay***1600 lb. capacity charger shelf standard
Model ID H
PSHTC-28 30" 12"PSHTC-33 35" 12"PSRTC-15 15 3/4" R*PSRTC-28 30 3/4" R*PSRTC-33 35" R*
Safety Note:
Specify interlay to runleft to right forbatteries 12" or less inwidth. Add “-LR”to model number.
Model PSHTC-28
Model PSHBS-72
Features
• Acid-resistant interlay
• Composition wheels
Option
• Roller bed
8
Side Removal Systems
Model PSWC-40-44-V
PRO Series PRO Changer
The economical battery changerThe PSWC is a completely portable battery changerfor the small fleet with a variety of batterycompartment heights up to 27".
Features
• Front loading
• Vacuum extraction
• Single point/dead-man controls
• Two speed electric drive
• Up-down and in-out hydraulic powered
• 24V battery pack with 110V built-in charger
• Dual battery safety stop
• Capacity: 4000 lbs.
• Turning radius: 84"
• Roller bed height: variable 3" to 27"
• Hour meter
Model PSPC-24-24-V(pallet jack not included)
Model Maximum Battery Width
PSWC-40-44-V 40"
Available Models
PRO Series Portable Changer
Turns a pallet jack into a portable battery changerThe PSPC is an economical attachment for apallet jack. Powered from the pallet jackbattery and limited to the host truck’s heightcapability, the PSPC is a safe, affordable andflexible small fleet battery changer.
Features
• Mounts on your existing pallet truck
• Vacuum extraction
• Pallet truck battery provides power
• 12- or 24-volt models available
• Controls mount for operation from either side
Capacity is based on the pallet jack load capacity
and overall fork length.
Model Maximum Battery Width
PSPC-24-24-V 24"
PSPC-40-24-V 40"PSPC-24-24-V-44* 44"PSPC-40-24-V-44* 40"
Available Models
For 12 Volt models change “24” at end to “12”. *Handles batteries to 44" long.
*“R” refers to the desired height of rollers above floor. Minimum of 6".Must specify. i.e. R=7”All dimensions shown are nominal and subject to change.
TMTM
9
Side Removal Systems
PRO Series Single Level Adjustable RackSingle stack charging rack with charger shelf andadjustable compartments, shown with battery.
Model Overall Width Capacity
PSSAR-72 72" 10,800 lbs.
PSSAR-84 84" 12,600 lbs.
PSSAR-96 96" 14,400 lbs.
PSSAR-120 120" 18,000 lbs.
PRO Series Single Stacking Adjustable Racks
Recommended for use with PRO Stackersystems
Features
• Fully adjustable battery compartments
• Modular design
• Heavy duty slide strips and lead rollers used inside
each battery compartment
• High capacity top charger shelf
• Adjustable battery backstops
Typical PRO Series Adustable Rack Installation
Battery compartment with adjustable back stop
With PRO Series Adjustable Racks, you can change the configuration of your battery compartments as required.Adjustable Racks allow you to fully utilize all youravailable space.
12
Overhead Removal Systems
Features
• Hydraulic powered travel
• 4000 lb. or 6000 lb. capacity
• 10' or 12' under-beam height
• Up to 20' between uprights
• Dual sided drive system
• Low profile flat guide track
Options
• Hoists and Trolleys
Wash Rack withInterlay (see pg. 15)
Battery Stations withInterlay (see pg. 13)
Hydraulic Traveling Gantry Cranewith Hoist Assembly
Battery Handling Beam(see pg. 18)
Capacity on Crane4000 lbs. or 6000 lbs.
Hydraulic Traveling Gantry CraneSystemThe PRO Series Hydraulic Traveling GantryCrane is the ideal system when batterychanging must be done from overhead.The PSGC offers six-way motion at afraction of the cost of a bridge crane and iseasy to assemble and install. As with mostEnerSys PRO Series battery changingsystems, the PSGC can be easily expandedas your lift truck fleet grows.
The hydraulic power unit provides positivesoft starts and stops for safety and controlwhile batteries are being changed. Non-powered, track-guided and portable gantrycranes with hoists are also available.
Hoists Options**
• 2-ton electric chain hoist with plain (manual) trolley and chain
container (2 button pendant) Model PSEHPT2-2-6*
• 3-ton electric chain hoist with plain (manual) trolley and chain
container (2 button pendant) Model PSEHPT3-2-5*
• 2-ton electric chain hoist with motorized trolley and chain
container (4 button pendant) Model PSEHMT2-4-X*
• 3-ton electric chain hoist with motorized trolley and chain
container (4 button pendant) Model PSEHMT3-4-X*
• 2-ton electric chain hoist with motorized trolley and chain
container (6 button pendant) Model PSEHMT2-6-X*
• 3-ton electric chain hoist with motorized trolley and chain
container (6 button pendant) Model PSEHMT3-6-X*
** Note: Motorized trolley and six-button control pendant are
required with the PSGC series gantry cranes.
Buttons operate: up/down, left/right trolley travel and
forward/reverse crane travel
* X = Desired primary three phase voltage (208, 230, 460, 575)
please specify.
TMTM
10 11
Side Removal SystemsSide Removal Systems
Single-Level PRO StackersThis is the perfect machine for those facilitiesrequiring multiple lift truck battery changes per day.With two compartments, the PRO Stacker series letsyou make the maximum use of your rack spacewhile operators remove and replace batteries quicklyand efficiently.
Features
• Powered vacuum or magnet extraction
• Carriage equalization chain system with four independent
lift cylinders
• Deadman operator platform
• Five powered rollers per battery compartment
• Vacuum arm safety lockoutHydraulic Extension Arm PSPC-HE
PRO Series Multi-Stacking SystemsThe EnerSys Multi-Stacking PRO Stackers aredesigned to make maximum use of valuable floorspace for facilities with high-capacity applicationsrequiring multiple battery changes per day.
Features
• Battery stacking 2 to 6 high
• Variable speed drive
• Simultaneous travel and lift
• Powered vacuum or magnet extraction
• PLC controlled battery safety stops
The PRO Series Power SystemThe PRO Stacker is EnerSys’ top-of-the line batterychanger for facilities that can’t afford to slow down. Thelarger the fleet, the more important space utilizationbecomes and that’s why PRO Stackers are so importantto so many companies.
Whether you require a single level battery changingoperation, or a multi-stacking system up to six high,the EnerSys PRO Stacker provides positive, safebattery changing without operator fatigue.
In fact, the twin-compartment PRO Stacker is soefficient that it can extract the discharged battery andreplace it with a fresh one in under two minutes – allwith no operator contact with the battery except forconnecting and disconnecting the charger.
EnerSys PRO Stacker series is the ultimate in sideremoval battery changing equipment, allowing you tofully utilize your available space – whether it reachesout or up!
The hydraulic extension arm is an option available onall PRO Stackers to allow access to batteries acrosswide outriggers.
Triple Stacking PSHETS-V-2-40-GS
PRO Stacker Mounted Watering System
Quad Stacking System featuring a PSHEQS-V-2-40-GS
PRO Series Multi-Stacking Adjustable Rack Charger Shelves
TMTM
10 11
Side Removal SystemsSide Removal Systems
Single-Level PRO StackersThis is the perfect machine for those facilitiesrequiring multiple lift truck battery changes per day.With two compartments, the PRO Stacker series letsyou make the maximum use of your rack spacewhile operators remove and replace batteries quicklyand efficiently.
Features
• Powered vacuum or magnet extraction
• Carriage equalization chain system with four independent
lift cylinders
• Deadman operator platform
• Five powered rollers per battery compartment
• Vacuum arm safety lockoutHydraulic Extension Arm PSPC-HE
PRO Series Multi-Stacking SystemsThe EnerSys Multi-Stacking PRO Stackers aredesigned to make maximum use of valuable floorspace for facilities with high-capacity applicationsrequiring multiple battery changes per day.
Features
• Battery stacking 2 to 6 high
• Variable speed drive
• Simultaneous travel and lift
• Powered vacuum or magnet extraction
• PLC controlled battery safety stops
The PRO Series Power SystemThe PRO Stacker is EnerSys’ top-of-the line batterychanger for facilities that can’t afford to slow down. Thelarger the fleet, the more important space utilizationbecomes and that’s why PRO Stackers are so importantto so many companies.
Whether you require a single level battery changingoperation, or a multi-stacking system up to six high,the EnerSys PRO Stacker provides positive, safebattery changing without operator fatigue.
In fact, the twin-compartment PRO Stacker is soefficient that it can extract the discharged battery andreplace it with a fresh one in under two minutes – allwith no operator contact with the battery except forconnecting and disconnecting the charger.
EnerSys PRO Stacker series is the ultimate in sideremoval battery changing equipment, allowing you tofully utilize your available space – whether it reachesout or up!
The hydraulic extension arm is an option available onall PRO Stackers to allow access to batteries acrosswide outriggers.
Triple Stacking PSHETS-V-2-40-GS
PRO Stacker Mounted Watering System
Quad Stacking System featuring a PSHEQS-V-2-40-GS
PRO Series Multi-Stacking Adjustable Rack Charger Shelves
TMTM
9
Side Removal Systems
PRO Series Single Level Adjustable RackSingle stack charging rack with charger shelf andadjustable compartments, shown with battery.
Model Overall Width Capacity
PSSAR-72 72" 10,800 lbs.
PSSAR-84 84" 12,600 lbs.
PSSAR-96 96" 14,400 lbs.
PSSAR-120 120" 18,000 lbs.
PRO Series Single Stacking Adjustable Racks
Recommended for use with PRO Stackersystems
Features
• Fully adjustable battery compartments
• Modular design
• Heavy duty slide strips and lead rollers used inside
each battery compartment
• High capacity top charger shelf
• Adjustable battery backstops
Typical PRO Series Adustable Rack Installation
Battery compartment with adjustable back stop
With PRO Series Adjustable Racks, you can change the configuration of your battery compartments as required.Adjustable Racks allow you to fully utilize all youravailable space.
12
Overhead Removal Systems
Features
• Hydraulic powered travel
• 4000 lb. or 6000 lb. capacity
• 10' or 12' under-beam height
• Up to 20' between uprights
• Dual sided drive system
• Low profile flat guide track
Options
• Hoists and Trolleys
Wash Rack withInterlay (see pg. 15)
Battery Stations withInterlay (see pg. 13)
Hydraulic Traveling Gantry Cranewith Hoist Assembly
Battery Handling Beam(see pg. 18)
Capacity on Crane4000 lbs. or 6000 lbs.
Hydraulic Traveling Gantry CraneSystemThe PRO Series Hydraulic Traveling GantryCrane is the ideal system when batterychanging must be done from overhead.The PSGC offers six-way motion at afraction of the cost of a bridge crane and iseasy to assemble and install. As with mostEnerSys PRO Series battery changingsystems, the PSGC can be easily expandedas your lift truck fleet grows.
The hydraulic power unit provides positivesoft starts and stops for safety and controlwhile batteries are being changed. Non-powered, track-guided and portable gantrycranes with hoists are also available.
Hoists Options**
• 2-ton electric chain hoist with plain (manual) trolley and chain
container (2 button pendant) Model PSEHPT2-2-6*
• 3-ton electric chain hoist with plain (manual) trolley and chain
container (2 button pendant) Model PSEHPT3-2-5*
• 2-ton electric chain hoist with motorized trolley and chain
container (4 button pendant) Model PSEHMT2-4-X*
• 3-ton electric chain hoist with motorized trolley and chain
container (4 button pendant) Model PSEHMT3-4-X*
• 2-ton electric chain hoist with motorized trolley and chain
container (6 button pendant) Model PSEHMT2-6-X*
• 3-ton electric chain hoist with motorized trolley and chain
container (6 button pendant) Model PSEHMT3-6-X*
** Note: Motorized trolley and six-button control pendant are
required with the PSGC series gantry cranes.
Buttons operate: up/down, left/right trolley travel and
forward/reverse crane travel
* X = Desired primary three phase voltage (208, 230, 460, 575)
please specify.
TMTM
All equipment available with magnet.
13
Overhead Removal Systems
Battery Station with Acid-Resistant InterlayMeets OSHA requirements.
Battery Stations available less charger shelf. Add “-LCS” to model number.
Features
• Acid-resistant charging surface
• Corrosion-resistant spacers
• Heavy duty construction
• 800 lb. or 1600 lb. capacity charger shelf (see chart)
Overhead Transporter with Acid-Resistant Interlay
Model Width
PSHBS-30* 32"PSHBS-42** 44"PSHBS-60** 62"PSHBS-72** 74"PSHBS-84** 86"PSHBS-100*** 102"PSHBS-120*** 122"PSHBS-144*** 148"
*Interlay runs front to rear (standard)**Available with left to right interlay***1600 lb. capacity charger shelf standard
Model ID H
PSHTC-28 30" 12"PSHTC-33 35" 12"PSRTC-15 15 3/4" R*PSRTC-28 30 3/4" R*PSRTC-33 35" R*
Safety Note:
Specify interlay to runleft to right forbatteries 12" or less inwidth. Add “-LR”to model number.
Model PSHTC-28
Model PSHBS-72
Features
• Acid-resistant interlay
• Composition wheels
Option
• Roller bed
8
Side Removal Systems
Model PSWC-40-44-V
PRO Series PRO Changer
The economical battery changerThe PSWC is a completely portable battery changerfor the small fleet with a variety of batterycompartment heights up to 27".
Features
• Front loading
• Vacuum extraction
• Single point/dead-man controls
• Two speed electric drive
• Up-down and in-out hydraulic powered
• 24V battery pack with 110V built-in charger
• Dual battery safety stop
• Capacity: 4000 lbs.
• Turning radius: 84"
• Roller bed height: variable 3" to 27"
• Hour meter
Model PSPC-24-24-V(pallet jack not included)
Model Maximum Battery Width
PSWC-40-44-V 40"
Available Models
PRO Series Portable Changer
Turns a pallet jack into a portable battery changerThe PSPC is an economical attachment for apallet jack. Powered from the pallet jackbattery and limited to the host truck’s heightcapability, the PSPC is a safe, affordable andflexible small fleet battery changer.
Features
• Mounts on your existing pallet truck
• Vacuum extraction
• Pallet truck battery provides power
• 12- or 24-volt models available
• Controls mount for operation from either side
Capacity is based on the pallet jack load capacity
and overall fork length.
Model Maximum Battery Width
PSPC-24-24-V 24"
PSPC-40-24-V 40"PSPC-24-24-V-44* 44"PSPC-40-24-V-44* 40"
Available Models
For 12 Volt models change “24” at end to “12”. *Handles batteries to 44" long.
*“R” refers to the desired height of rollers above floor. Minimum of 6".Must specify. i.e. R=7”All dimensions shown are nominal and subject to change.
TMTM
14
Battery Cleaning
Battery Wash CabinetsPrevent buildup of acid on batteries forreduced maintenance and longer life.With all stainless steel construction, EnerSys PROSeries Wash Cabinets are designed for long-lastingdependability. The rollers’ stainless steel shaftsrotate in the Nelsonized® hardwood bearing framethat eliminates roller bearings in the harsh cleaningenvironment of the wash cabinet.
The two panel door allows these cabinets to fit intoareas with overhead obstructions as low as 9 feet.The new door is easy to maintain while the multi-directional air and water nozzles let you adjust forthe variety of batteries in your facility.
Multi-directional air and water nozzles; Non-metallic air and water lines
Rotary bottom scrubber
Options
• Rotary bottom scrubber
• Powered rollers (for front loading)
Wash Cabinet Model WCA-SS
Features
• Stainless steel construction and roller shafts ensure durability
• Nelsonized® hardwood bearing frame and non-metallic air and
water lines provide trouble free operation
• Chemicals not required
• Multi-directional air and water nozzles rinse batteries in a
totally enclosed environment
• Adjustable wash cycles
• Air curtain removes excess water
• 120 volt primary voltage with 12 volt DC secondary voltage
• Built-in drain tray with 1" pipe coupling removes sediment
• Systems designed to accept PSRNS-1 sump pump in drain tray
Utilities and air provided by customer.
7
Side Removal Systems
Battery Station with Rollers
*45" deep units available. Add “-45” to model number.To order without shelf add “-LCS” to model number.‘R’ = Desired height of rollers above floor. Minimum of 5".Must specify. i.e. R=7”Adjustable Height Plus or Minus 1 1/2".All meet OSHA requirements.
Battery Station with Rollers
Features
• Heavy-duty construction
• Non-conductive roller bed
• Spring loaded rollers
• Adjustable legs
• Battery safety stops
• 800 lb. capacity charger shelf
• Models for all battery sizes
Battery Service Station
Features
• Heavy-duty construction
• Non-conductive roller bed
• Spring loaded rollers
• Adjustable legs
• Battery safety stops
• 2.5" diameter roller
Model Roller Width Outside Width (OW)
PSBS12-2 12" 26"PSBS15-2 15" 32"PSBS18-2 18" 38"PSBS21-2* 21" 44"PSBS24-2* 24" 50"PSBS27-2 27" 56"PSBS30-2 30" 62"PSBS33-2 34” 70”
Two-Compartment
Model Roller Width Outside Width (OW)
PSBS12-3 12" 39"PSBS15-3 15" 48"PSBS18-3 18" 57"PSBS21-3* 21" 66"PSBS24-3* 24" 75"PSBS27-3 27" 84"PSBS30-3 30" 93"PSBS34-3 34” 105”
Battery Service Station
Three-Compartment
Model PSBSS-21
Model PSBSS-15
Model Roller Width Outside Width (OW)
PSBSS-15 15" 15 3/4PSBSS-21 21" 21 3/4
R = roller height Available from 5" to 14"
All dimensions shown are nominal and subject to change without notice.
EnerSys PRO Series Battery Wash Cabinet combines withthe Recirculating Water System to form a complete,closed-loop battery cleaning system.
For more information on the Recirculating Water System,please refer to page 15.
Model PSBSS-21
TMTM
6
Side Removal Systems
Battery Transfer Carts with Mechanical Loader
Features
• Adjustable roller bed height
• Foot operated jack
• Floor lock
• Push/pull plate mechanically driven
• Composite wheels
• Battery safety stop
• Spring loaded rollers
• Adjustable chain to secure transfer
cart to side of truck*
Options
• Powered push/pull and lift
• Low profile for 3" load-in height
Model Maximum Battery Width Capacity Height
PSBTC-16MPP 15" 2000 lbs. 6"-22"
PSBTC-24MPP 21" 3000 lbs. 6"-30"
PSBTC-30MPP 30" 3000 lbs. 7"-30"
Available Models
15
Battery Cleaning
Model PSRNS-1 Recirculating Water SystemThe PSRNS-1 combines stainless steel construction withease of operation. You get a constant flow of water thatis filtered, pH monitored and recirculated, reducing yourenvironmental concerns.
The system features a single on/off switch and a singlerecirculating control switch and requires no toxicchemicals.Features
• 150 gallon reservoir
• 12 G.P.M. @ 50 P.S.I.
water flow
• 120 volt primary
voltage
• 12 volt sump pump
• Automatic low
pH shut off*
• Dual cartridge
supply line filters
• Trash screen on
sump drain
• Eliminates all
drain requirements
• Requires no toxic
chemicals
• Safe and easy to
operate
• Works with wash
cabinets or wash racks
• Automatic or manual operation
Option
• 300 gallon reservoir
Model PSPWS-R-SSWash Rack with Rollers
Dimensions 52 7/32" wide57" long55 1/8" high12 1/2" to top of rollers
Battery Wash Racks
Model PSPWS-OH-SSOverhead Load Wash Rack
Dimensions 52 7/32" wide57" long55 1/8" high
Model PSRNS-1 auto injection system
EnerSys’ economical wash racks are acid resistant forlong life and reduced maintenance.
All dimensions shown are nominal and subject to change.
*Requires safety attachment supplied by customer to securetransfer cart to truck when changing battery.For low profile add “LP” to model number. (Not available on PSBTC-30MPP)
PRO Series Quick Changer
The inexpensive alternative topower transfer carts
Model Maximum Battery Width Capacity Height
PSQC-24 24" 3000 lbs. 60.5"
PSQC-36 36" 3500 lbs. 60.5"
Available Models
* Fork pockets are available for standard sizes 27”x 42” or 48” in length.* 9” fork width.For powered push/pull please consult factory. Quick Changer mounted ontypical pallet truck adjusts from 6” to 12” in height.
Features
• Manual battery extraction
• Heavy duty rollers
• Durable powder coat finish
Option
• Fork pockets for use on multiple trucks*
Model PSRNS-1*Requires liquid neutralizer PSLNC
or equivalent for pH balancing.
TMTM
Portable EyewashModel PSPEW-700
Features
• 15 minute wash
• Stay-open valve
• ABS dual stream head with
pop-off covers
16
Accessories
Shower Eyewash AssemblyModel PSSEW-500Features
• Large stainless steel pull rod actuator
• Self-adjusting regulator to assure a
constant, even flow
• Galvanized piping
• ABS dual stream head with
pop-off covers
EyewashModel PSEW-300
Features
• Large stainless
steel push plate
• Self-adjusting
regulator to assure
a constant, even flow
• ABS dual stream head
with pop-off cover
Safety and Service Equipment
5
Side Removal Systems
Portable Battery ChangersEnerSys PRO Series DC powered portable batterychangers offer safety and flexibility at an economicalprice.
Battery Stations with Rollers
Wash Rackwith Rollers
Battery Transfer Cart withMechanical Loader
Wash Rackwith Rollers
PRO Changer
Battery Stations withRollers
Battery Transfer Cart with Mechanical LoaderEnerSys PRO Series non-powered battery changer isdesigned for smaller lift truck fleets that need easierbattery changing.
Using the PRO Changer
Battery Transfer Cart application
Model PSWG-1
Features
• Eliminates excess spillage of water
• Lightweight and can be operated with just one hand
• Saves battery filling time
• Auto shut-off
Watering Gun
Safety KitModel PSPK-1200
Kit IncludesChemical resistantface shield withpolycarbonate window.The adjustable ratchetheadgear ensures asecure comfortable fit.Acid apron ispolyester double-coated with PVC.One size apron neckstrap and waist tiesare adjustable.Gloves are nitrile acidresistant, with comfortcurved finger andhand design.
TMTM
4
Side Removal Systems
When it comes to battery changing equipment andsystems, industries around the world come toEnerSys. That’s because EnerSys is uniquelyqualified to help companies like yours meet thechallenge of battery changing both now and in thefuture. Utilizing EnerSys’ team of engineers,designersand sales and service professionals, youcan take charge of your changing needs withefficient, dependable systems designed for anyworkload and budget.
With EnerSys products, you’re assured of state-of-the-art, long-lasting equipment and systemsdesigned with safety in mind that deliver increasedproductivity for many years to come. EnerSysunderstands that your facility will grow, so wedesign our systems to be expandable — to growright along with you.
Whether your electric truck fleet is small or large,EnerSys has a side removal system that’s right foryour application. Our portable changing systemsinclude the non-powered push pull. If yourchanging needs require a powered portablesystem, consider an EnerSys portable changer.
PRO STACKER
Larger fleets demand more power, and EnerSys’industry-standard PRO Stacker is your solution.PRO Stackers provide a safe, dependable way tochange batteries quickly and efficiently withoutoperator fatigue. EnerSys PRO Stackers areavailable in single or double compartment modelsand from a single level up to a six-high system.This allows for the most efficient use of your floorspace and budget.
Wash Rackwith Rollers
WateringGun
Shower/Eye Wash
Assembly
Stand Mounted Guide Channel
Battery Station with Rollers
PRO Stacker(see page 10)
Single level PRO Stacker application
Replacing a battery
17
Accessories
Fork AttachmentModel PS-600081S
Used with Battery Handling Beam for battery removal
Features
• 48" safety chain and hook
• Swivel hook with safety latch
• Fork openings – 1 5/8" x 6 1/2"
• 6000 lb. capacity
All dimensions shown are nominal and subject to change.
Model OW
PSCS-24 24"PSCS-36 36"PSCS-72 72”
Charger Stands
Charger Wall BracketModel PSCWB
One set fits standard chargers
Option
Bracket for charger cable is PS12-0001-284.
TMTM
18
Accessories
Charger Cable RetractorModel PSCR-1
Charger Cable Retractor
Features
• Molded suspender holds
cables securely in place
• Oil tempered spring will not
kink or take permanent set
• Snubber chain restricts
spring back movement
• Rugged 5/8" threaded stud
Model Capacity OL Batteries BH* Adjustable in 3" increments
PSBEAM-4PL 4000 lbs. 43" 21" to 42" long 24" to 39"PSBEAM-6PL 6000 lbs. 47" 25" to 46" long 28" to 43"
Standard beam height =15”*BH dimensions with hooks in vertical position. Each hook may be angled 1 1/2” open or closed safely. All dimensions shown are nominal and subject to change. Add “-EX” for Superhog Hook option.
Model PSBEAM-6PL
Battery Station with Rollers
Battery Lifting Beam
The battery lifting beam offers a heavy duty non-conductivemethod of lifting batteries. The non-slip hook design fitssnugly into most battery lifting holes.
3
Table of Contents
Select OSHA Regulations ............................................................................2
Section One: Side Removal SystemsPortable Side Removal..........................................................................5Battery Transporter...............................................................................6Portable Changer ..................................................................................8PRO Changer ........................................................................................8Single Level Adjustable Racks ..............................................................9PRO Stackers ......................................................................................10
Section Two: Overhead Removal SystemsGantry Cranes .....................................................................................12Battery Stations...................................................................................13Overhead Transporters........................................................................13
Section Three: Battery CleaningBattery Wash Cabinets ........................................................................14Recirculating Water System.................................................................15Battery Wash Racks ............................................................................15
Section Four: AccessoriesSafety and Service Equipment ............................................................16Fork Attachment .................................................................................17Wall Mounted Charger Bracket............................................................17Floor Mounted Charger Stand .............................................................17Charger Cable Retractor......................................................................18Battery Lifting Beam ...........................................................................18Power Distribution Panel......................................................................19
Battery Handling Equipment CatalogBattery Handling Equipment Catalog
General Notes
· All products illustrated are
current as of the publication
of this brochure.
· All dimensions shown are
nominal and subject to
change without notice.
· EnerSys reserves the right to
make changes and
modifications
without notice.
· Contact EnerSys for
additional details.
Standard hooks with Posi-latch safety mechanism.
The EnerSys Superhog hook is designed for batterycases that have reinforced battery lifting holes.Hooks come with the Posi-latch safety mechanism,shown without for illustration purposes only.
All EnerSys hooks comestandard with the Posi-latchsafety mechanism.
Model PSF8053ASSY
Model PSF9152ASSY
TMTM
Facts to know to help you takecharge of your changing needs.
For additional information see the OSHA home pageat www.osha.gov2 19
Power Distribution Panel
Power Distribution Panel
The PS-PDP is the smart way to distribute power to your battery chargers in a battery changing system.The unique modular design allows you to pre-wire your battery racks with an easy to install distributionpanel. Each panel is designed to accommodate four, six or eight chargers with one AC input.
By eliminating the need to pull wire from the main electrical panel to each charger, you will reduce yourneed for large breaker panel systems and all of the circuit breakers needed to run such a system. We havefound that it is less expensive to wire a system using the PS-PDP as this work is done in the field on a timeand materials basis.
PRO Series
Battery Handling Equipment
As the world's largest manufacturer ofindustrial batteries, we know the valueand importance of providing you withsuperior products — and we deliver!With an innovative and wide-rangingproduct offering, including our line ofstackers, changers and wash racks,PRO Series will meet all of yourbattery handling tasks. No matter thesize of your operation, EnerSys has asolution perfect for your specificneeds. With the largest network offactory-trained personnel andmanufacturer's representatives inNorth America, our knowledgeablestaff will find a PRO Series productthat is right for you. From batteries andchargers to environmental and safetyissues, EnerSys is your one source forsolutions for all your motive powerbattery needs. EnerSys and PRO
Series offer Power/Full Solutions fortoday's energy demands.
Powerful ideas and powerful
solutions for your battery
handling needs from EnerSys, the
professionals you know and trust.
29 CFR 1910.132(d) PPE hazard assessment and equipment selection.
The employer shall assess the workplace to determine if hazards arepresent, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, orlikely to be present, the employer shall:
(i) Select, and have each affected employee use, the types of PPE thatwill protect the affected employee from the hazards identified in thehazard assessment;
(ii) Communicate selection decisions to each affected employee; and,(iii) Select PPE that properly fits each affected employee.
29 CFR 1910.151 Medical services and first aid.
(a) The employer shall ensure the ready availability of medical personnelfor advice and consultation on matters of plant health.
(b) In the absence of an infirmary, clinic, or hospital in near proximity tothe workplace which is used for the treatment of all injured employees, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available.
(c) Where the eyes or body of any person may be exposed to injuriouscorrosive materials, suitable facilities for quick drenching or flushingof the eyes and body shall be provided within the work area for immediate emergency use.
29 CFR 1910.178(g) Changing and charging storage batteries.
(1) Battery charging installations shall be located in areas designated forthat purpose.
(2) Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and for adequate ventilation for dispersal of fumes from gassing batteries.
(3) [Reserved](4) A conveyor, overhead hoist, or equivalent material handling
equipment shall be provided for handling batteries.(5) Reinstalled batteries shall be properly positioned and secured in the
truck.(6) A carboy tilter or siphon shall be provided for handling electrolyte.(7) When charging batteries, acid shall be poured into water; water shall
not be poured into acid.(8) Trucks shall be properly positioned and brake applied before
attempting to change or charge batteries.(9) Care shall be taken to assure that vent caps are functioning. The
battery (or compartment) cover(s) shall be open to dissipate heat.(10) Smoking shall be prohibited in the charging area.(11) Precautions shall be taken to prevent open flames, sparks, or electric
arcs in battery charging areas.(12) Tools and other metallic objects shall be kept away from the top of
uncovered batteries.
1910.178(g)(6) refers to diluting pure acid with water. A properly designed,manufactured and maintained lead-acid battery already contains diluted acidand therefore it is safe to add water to the battery.
Note: This regulatory information is intended to provide a helpful summary ofselect federal labor regulatory provisions governing lead-acid batteries and isnecessarily limited in nature. It is not intended to provide, and should not beinterpreted as providing, legal advice with respect to any specific matters andshould be used only as a point of departure for individual legal evaluationof federal, state and local requirements that may apply to your operations.
Features
• Single AC input feeds 4 - 8 chargers
• Requires less wire and smaller conduits
• Requires smaller main distribution panel and fewer breakers
• Isolated circuits
• Twist lock connectors included
Model # PSPDP-(X)- (Y ) eg. PSPDP-6-20-1825
4X 6
8
20-610 4.5 - 10 ampsY 20-1320 11 - 17 amps
20-1825 18 - 20 amps30-2332 21 - 30 amps
** All at 480 Volts 3 Phase
AC Amperage Per charger ** AC Amperage Per charger ** AC Amperage Per charger **
4 Circuits In Panel6 Circuits In Panel8 Circuits In Panel
AC Amperage Per charger **
Sizing Information
TMTM
EnerSys World Headquarters
2366 Bernville Rd., Reading, PA 19605
1-800-ENERSYS
www.enersysmp.com
Section 84.50Rev.CPrint date 4/07
TM
We are so confident in our products, capabilities, and expertise that we offer the strongest guarantee in the industry. We call it the Power of PRO Series.
The Power of the largest industrial battery manufacturer in the world…
The Power to provide the most complete and varied battery handling product line in the industry…
The Power to service with hundreds of factory service representatives, dedicated manufacturer’srepresentatives, and PRO Series distributors in North America…
The Power to maintain the best products, the best service, and the most expertise at competitivepricing to help you maximize your battery handling and maintenance resources…
The Power to change an industry with unique and innovative ways to ensure safe, efficientand environmentally friendly products…
EnerSys warrants all PRO Series battery handling equipment to be free from defects in material andworkmanship under normal and proper use, operation, and maintenance for a period of 12 months with these terms and conditions:
a) Wearable items such as belts, hoses, wheels, vacuum cups, etc. are warranted for 3 months.b) Electro-magnets are warranted an additional 48 months for a total coverage of 60 months.c) Replaceable items such as bulbs, filters, fuses, etc. are not covered unless defective prior to use.d) Does not cover damage or defects caused by overloading, abuse, misuse, accidents,
misapplication of products, or failure to follow operation or maintenance instructions.
While we can’t protect against misuse or neglect, we can minimize their effects by offering safetyand operator training, preventive maintenance agreements, and serving as your complete motivepower battery consultant. Isn’t it time you realize the Power of PRO Series?
Talk to your favorite PRO Series representative to find out if PRO Series is right for you.
The PRO Series Guarantee
All copyrights reserved.All trademarks are the property of or licensed to EnerSysexcept Nelsonized, which is not the property of EnerSys.