battery information track layouts · use the switch-track to control your engine’s direction....
TRANSCRIPT
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy
Use the switch-track to control your engine’s direction. Stop-track can be used to stop and start TrackMaster™ motorized engines. Move Cranky side-to-side and turn the dial to raise and lower the hook.
Hook only lowers when carrying weight. If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CSCS
CS
CS
CS
CS
CSCS
YS
YS
S8
S8
S8
S8
S1
S1S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2S2
S2
RB1
RB1
D3
D3RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CSCS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2 RS2
RS2
RS2
RS1RS1
RS1
RS2
RS2
RS2
RS2
DC
D3RS2
RB1RS2
DC
S1
ES7
CS
CSCS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS CS
CS CS
CS CS
CS
S1
S1 S1
S1
DC DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CSCS
CSCS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4 X1 S1 X12
S2 X3 X2YS
CS X12
X1S8
D3 X10
X2DC
ES7 X2
X2ES5
RS1 X4
RS2 X14
X5RB1
Pieces Used:
For sturdy assembly, please attach tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs. If going from another layout to the Micro layout, please remove legs.
X2RT
S1 X1 CS X2
X3S8
Pieces Left Over:
X2Buffer
D3 D3
D3
D3
D3
RS1 RS1
RS1RS1
RS2
RS2RS2
RS2 RS2RS2RS2RS2
S1 X4
CS X8
ES7 X2
Pieces Used:
X2DC
S4 X1
S2 X3
X2YS
CS X6
X2ES5
S1 X9
X4S8
X2RT
D3 X10 RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
RB1
RB1RB1
S4
CSCS
CS
CS
CS
CS
CS
CS
CSCS
CS
CS
CS
YSYS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7ES7
S2S2
S2
S4
CS
CS CS CS
CS
CS
CS CS
CS
CS
CS
CS
CS
CS
YS
YS
S1 S1
S1
S1
S1
S1
S1
S1
ES5 ES5ES7 ES7
S1 S1 S1
S2
S2
S2
S4 X1
CS X3
X1RT
D3 X5
X1DC
ES7 X1
X1ES5RS1 X4
RS2 X6X3RB1
Pieces Left Over:
X1Buffer
Buffer
Buffer
Buffer
S1 X13
S2 X3 X2YS
CS X11
X4S8
X1RT
D3 X5
X1DC
ES7 X1
X1ES5
RS2 X8
X2RB1
Pieces Used:
X1Buffer
S4 X1 S1 X11
S2 X3 X2YS CS X14
ES7 X2 X2ES5
Pieces Used:
S1 X2
X4S8
X2RT
D3 X10
X2DC
RS1 X4
RS2 X14
X5RB1
Pieces Left Over:
X2Buffer
3 ft H x 5.5 ft L x 5.5 ft W(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1X1
X3 X1X1
X1 X1X1 X1 X1
X1 X1
X1 RT X2
D3
DC
X10
X3
X1 X1
X1
X1
X1
X2
X2 X2
X13
X14X2 X2 X2X2 CS
YS
S2ES5ES7
X14RS2
X2ATM X2AAdv X2AW1
X4
X4X2
RS1
X5RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTSTM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10 1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures engines, please place onto hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that it “clicks” into place until you get to the other side.
Helipad can be attached to either side of roof.
For easier assembly, insert into one side first and then attach the other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines and cargo can be carried in engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are“one-time snaps “. Once these parts are put together, they cannot be taken apart.
Note: Some engines may not work on this track set.
ATM(TrackMaster™)
(Wooden Railway)
(Adventures)
X2 X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY, AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATIONAccess the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation. You may need to reset the electronics by removing the batteries and reinstalling them. If the product continues to malfunction or no longer operates, remove the batteries from the toy and replace them with fresh batteries. Requires 2 “AAA” (LR03) batteries.For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:Phillips screwdriver (not included)
1,5V x 2“AAA” (LR03)
BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the product before being charged.• Rechargeable batteries are only to be charged under adult supervision.• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the product.• The supply terminals are not to be short-circuited.• Dispose of batteries safely.• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited.©2017 HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
To prevent entanglement,keep hair away from wheels.
CAUTION:CHOKING HAZARD – Small parts.Not for children under 3 years.
WARNING:
FGR22-0970-G21101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONSKeep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.Other engines sold separately and subject to availability. Does not work with My First
Thomas engines.
TM
works withworks with
TM
Item No : FGR22-0910-G2 1101435661-DOMSize : 33.1” x 23.4”Paper : Woodfree paper 70 gsmColor : 4CDate : 08/2/2017 (Emma Wei)DielineMagenta
Front Back
Fold
3 45 6 7 89 10 11 12
COVER BACK
16
17 18
13 14 15
19 2021 22 23 2425 26 27 2829 30 31 32
COVER BACK 3 4
9 10 11 12
5 6 7 8
13 14 15 16
Cover Back Cover
4/28/17 remark for G1- Updated battery informatiom
8/2/17 remark for G2- Updated copy