beam lay out laser marking system1
TRANSCRIPT
USA and WORLDWIDE PATENTS
ELIMINATE MANUAL LAY-OUT ON THE SHOP FLOOR………….
Laser Lay-Out Marking System model LLP5020
“WE BELIEVE IN INNOVATION NOT IMITATION”
The LLP5020 is capable of marking structural members with two (2) Laser Heads simultaneously on up to 12 surfaces at speeds of 400 IPM (4 TIMES FASTER THAN PLASMA)
Data is imported directly from a 3D model Software or via manual input – LASER FAST
•Eliminate Lay-out on Main Members • Increase Accuracy •No misread drawings •No Measure Tape Errors •Less Rework •Amazingly Fast Lay-Out TimeW18 x 35 WF Beam 3’0” long – 294 marks on 12 surfaces
Total Processing Time = 2 minutes and 2 seconds
“WE BELIEVE IN INNOVATION NOT IMITATION”
USA and WORLDWIDE PATENTS
The drawing below contains 146 marks on four (4) surfaces and was marked with the LLP5020 in 42 seconds – LASER FAST
NB Automation LLC“WE BELIEVE IN INNOVATION NOT IMITATION”
USA and WORLDWIDE PATENTS
The pictures below shows LASER MARKED beams at one the largest Steel fabricators in the USA
NB Automation LLC“WE BELIEVE IN INNOVATION NOT IMITATION”
USA and WORLDWIDE PATENTS
The pictures below shows LASER MARKED beams at one the largest Steel fabricators in the USA
NB Automation LLC“WE BELIEVE IN INNOVATION NOT IMITATION”
USA and WORLDWIDE PATENTS
The LLP5020 is a self-contained unit (with RFM measuring unit) capable of marking Structural members up to 50” wide and 20” high – LASER FAST
•Absolutely NO MISTAKES, if the drawing is correct the lay-out on the beam will be correct !•Complete lay-out with all Welding Information as well as Orientation Marks etc.
“WE BELIEVE IN INNOVATION NOT IMITATION”
USA and WORLDWIDE PATENTS
This machine will undoubtedly change the Structural Steel Fabrication Industry forever. Manual Layout is now a thing of the past.The Information for Layout Marks, Welding Information as well as other data will be directly imported from the 3D drawing to the LLP5020 and transferred on to the beam via two (2) Fiber Optic Lasers.
!JPS INTERNATIONAL INC. www.jpsint.com info @jpsint.com +1 714 376 8681
For further Information, to receive a quote or a Video please contact: !
COST JUSTIFICATION : A 50 men shop that works 2500 man-hours per week can expect savings of approx. $10,369.00 per week. A 100 men shop that works 5000 man-hours per week can expect savings of approx. $20,738.00 per week. A 140 men shop that works 7000 man-hours per week can expect savings of approx. $29,033.00 per week. !!!!RETURN ON INVESTMENT : 40 men shop – 2000man hrs/wk – machine will be paid in 60 weeks 100 men shop – 5000man hrs/wk – machine will be paid in 24 weeks 140 men shop – 7000man hrs/wk – machine will be paid in 17weeks !! !!!!
“WE BELIEVE IN INNOVATION NOT IMITATION”