Mystik General Purpose Grease

Mystik General Purpose Grease is a very economical multi-purpose grease especially suited for normal temperature/speed conditions and non-critical service applications. This product is economical for applications requiring frequent re-greasing due to a contaminating environment. • Water Insoluble • Economical

Mystik JT-6 High Temperature Grease

Mystik JT-6 Hi-Temp Grease is a high-temperature, lithium-complex grease that combines excellent multi-purpose properties with a high dropping point and low temperature pumpability that provides a wide operating temperature range. This product provides superior protection in heavily loaded industrial, mining and construction applications. 400 grams cartridge and 35 lbs pails

Mystik High Load MOS2 Grease

Mystik JT-6 Hi-Temp Grease with Moly is a high performance mining and construction grease that provides superior performance where a moly-compounded, adhesive, multi-purpose high temperature lithium complex grease is required. This product gives optimum protection in severe environments. Mystik JT-6 Hi-Temp Grease with Moly provides excellent performance where Ford ESA-M1C75-B, Mack Multi-Purpose MG-C, or Caterpillar 3% Moly Lithium greases are recommended. NLGI Certified GC-LB. • An exceptionally versatile premium quality multi-purpose lithium complex grease • Fully additive treated. EP/antiwear, rust and oxidation inhibited • Contains 3% Molybdenum Disulfide (moly) for extreme service conditions found in mining, construction, and severe industrial applications • Water insoluble and water washout resistant • Superior wheel bearing and chassis performance • Superior protection to lubricate a wide variety of heavy duty automotive, agricultural, trucking, industrial, mining, and construction equipment • Provides excellent performance where Ford ESA-M1C75-B, Mack Multi-Purpose MG-C, or Caterpillar 3% Moly Lithium greases are recommended

Mystik Marine Grease

Mystik JT-6 High Performance Marine Grease to ensure superior performance against rusting in both fresh and sea water marine applications. Recommended for greased automotive chassis points, trailer wheel bearings, bearing buddies, boat lifts, hydraulic jack plates, steering components, tilt and trim systems, Etc.

Mystik JT-6 High Performance Multi-Purpose Grease

Mystik JT-6 Multi-Purpose Grease is our most water resistant and water insoluble product. It is light colored, low staining, and has a very low oil separation rate. Mystik JT-6 Multi-Purpose Grease provides excellent antiseize protection under high loads. Outstanding adhesion enables this product to stay in place better than most other greases. This product is a medium temperature range multipurpose grease for extreme pressure loads and slow to medium speed bearings. It is excellent for greased chassis points, fifth wheels, and water pumps. It works especially well where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, and excellent rust protection is desired. It is fully rust and oxidation inhibited. Mystik JT-6 Multi-Purpose is also available in an aerosol form. This product penetrates hard-to-reach points to leave a protective coating of grease. Mystik JT-6 Multi-Purpose Spray Grease has the ability to stay in place and lubricate, even under extreme pressures and severe service. It resists rust, corrosion, oxidation, and wear. This product is ideal for hard to reach points and precise placement. Mystik JT-6 Multi-Purpose Spray Grease dries into a non-fluid consistency in about 15 minutes. • A medium temperature range multi-purpose grease for extreme pressure loads, slow to medium speed bearings, greased chassis points, fifth wheels, and water pumps • Especially good where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, or where excellent rust protection is desired • Aerosol is excellent for hard to reach locations

REGULAR GRADE 8oz/16oz/1lb/8lbs/42lbs

Never-Seez®, a prominent trademark in the Bostik family of products, has been recognized for almost five decades as the industrial leader in anti-seize and lubricating compounds. When first introduced, the original Never-Seez anti-seize compound represented an innovative way to assemble and disassemble metal parts with ease. A new technology in mechanical engineering, Never-Seez was soon specified for major industrial and government use on parts exposed to heat, pressure and corrosion. Never-Seez contains very fine metallic particles in a special hydrocarbon carrier which seals and protects metal parts under the most extreme conditions of heat, pressure, and contamination. The fine, protective film of Never-Seez cannot be burned off or completely removed by abrasion. Never-Seez cannot be washed off by fresh or salt water. The protective coating will remain, even after extended exposure to the elements. Application of Never-Seez insures trouble-free protection against seizure, corrosion, pitting, and galling of metal parts. Disassembly of machinery, piping and metal parts are extremely difficult. Both driven and static parts of mechanical equipment are subject to seizure. Seizure can be caused by many factors: thread distortion caused by heat with subsequent expansion and contraction of metals; incorrect tolerances in press, tapered and shrink fits; effects of exposure causing corrosion; galvanic action because of adjacent dissimilar metals; and carbon deposits in internal combustion applications. Never-Seez helps to eliminate these issues. The costly expense of down-time, maintenance, repair or replacement of parts can be greatly reduced by using Never-Seez; through nondestructive disassembly and bolt reuse. Surface coverage up to 6,480 sq. in. coverage per pound based on film thickness of 4 mils. REGULAR GRADE The “original” anti-seize compound and extreme pressurelubricant formulated with copper,graphite, aluminum and other ingredients to protect metal parts against rust, corrosion and seizure up to 1800ºF. Fine metallic and graphite particles in special grease protect parts even in high heat, high pressure and corrosive environments. Meets Ford ESE-M12A4-A, Garrett Engine Div. PCS5724, Pratt & Whitney PWA 360523-2 and tested to MIL-A-907. Benefits: • Resists galvanic action between dissimilar metals • Protects against carbon fusion • Resists alkaline solutions, most chemical and acid vapors, road salt, steam and salt water • Prevents galling and seizure on steel to stainless steel, titanium, magnesium, and other hard metals Pack sizes - 8oz Brush Top Tins 16 oz Brush Top Tins 1 lb Flat Top Packs 8 lb Flat Top Packs 42 lbs Steel Pails

PURE NICKEL Special 8oz/16oz

Never-Seez® Pure Nickel Special is a superior, high temperature anti-seize and extreme pressure lubricant containing flake particles of pure nickel, graphite and other additives in a special grease carrier found to enhance anti-seize performance. Recommended for use when applications prohibit the presence of copper, especially when resistance to corrosive acidic and caustic solutions is required. Product Benefits • Excellent heat dispersing qualities • Minimizes corrosion • Prevents seizure at high temperatures • Resists galvanic action between dissimilar metals • Enables fast disassembly-even after high temperature exposure • Prevents galling on steel to stainless steel,titanium, magnesium and other hard metals • Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water, ionized water Product Applications • Fittings, fasteners exposed to high temperatures in steel mills, power plants, nuclear plants • Stainless steel pipe fittings, flanges, pump fittings • Fasteners in exhaust manifolds and boilers • Steam generators • Assembly of dissimilar metals

Never-Seez Stainless 8oz

HIGH TEMPERATURE STAINLESS A stainless steel, graphite, aluminum based anti-seize compound formulated to protect up to 2200ºF against seizure and galling, galvanic and severe environmental corrosion. It was specifically designed for applications that cannot use nickel based products. Tested to MIL-A-907. PRODUCT APPLICATIONS: • Fasteners in steel mills and power plants • Stainless steel pipe fittings, flanges, pump fittings and unions • Fasteners in exhaust manifolds • Reactor bolts • Turbine bolts • Gauges and fittings

NeverSeez Blue Moly

BLUE MOLY Never-Seez Blue Moly lubricant is designed for industrial applications requiring non-destructive assembly and disassembly where combinations of high loads, high temperatures and low speeds are encountered to reduce friction during the assembly of press-fit components. This multi-purpose extreme pressure anti-seize lubricant contains a high concentration of molybdenum disulfide. Especially effective under extreme pressures involving heavy loads and slow speed resulting in boundary lubrication conditions, Never-Seez Blue Moly withstands pressures to 300,000 psi and temperatures up to 1500ºF. PRODUCT APPLICATIONS: • Metal fittings • Aircraft components • Valves • Stainless steel fasteners and slow moving parts • Automotive engine bolts and body fasteners • Stainless steel flange and pump bolts • Chemical processing machinery • Gasket dressing • Assembly of dissimilar metals

Never-Seez Black Moly Paste

BLACK MOLY A high percentage of lubricious molybdenum disulfide in a premium grease provides ultimate protection for component assembly and roller bearings exposed to extreme pressure, high temperature and slow operating speeds. Withstands up to 500,000 psi and temperatures up to 750ºF. PRODUCT APPLICATIONS: • Press fit assemblies • Equipment break-in • Machine tool parts • Highly loaded bearings <500 RPM • Hot exhaust fans • Adjusting screws • Screw jacks • Crushing mills • Steel forming gates and slides

PIPE COMPOUND WITH TEFLON®

PIPE COMPOUND WITH TEFLON® Premium pipe and fitting lubricant and anti-seize compound formulated to provide maximum thread lubrication in a wide range of pipe threads and fittings. The use of Teflon‚ and other sealant enhancing additives in Never-Seez Pipe Compound, allows greater thread engagement and more positive sealing. This product prevents corrosion and galling of threads for easy disassembly at temperatures up to 525ºF. Recommended for use on black iron, galvanized stainless steel, and high pressure steam pipes in contact with malleable cast iron, brass, stainless steel and galvanized fittings. PRODUCT APPLICATIONS: • Water lines, non-potable • Sewerage and irrigation piping • Steam pipe fittings • Hydraulic lines and fittings • Pneumatic systems • Natural and propane gas lines

Never-Seez Pure Nickel Nuclear Grade

Never-Seez Nuclear Grade is superior, high temperature, extreme pressure anti-seize compound. It contains flake particles of pure nickel, graphite and other additives in a special grease carrier found to enhance anti-seize performance. Recommended for use when applications prohibit the presence of copper, especially when resistance is required. Specifications; certified: • Ford ESE-M12A4 / Ford WSD-M13P8-A1• Boeing BAC5008 Type 7-3 • Pratt & Whitney PWA 36053-1 • GE Engine A50-TF198 Class A • GE D6Y28C1• Garrett Engine Div. PCS5721• Rolls-Royce EMS27627 Pure Nickel Special Nuclear Grade is specially tested and certified pure for use in nuclear power plants. Each production lot of Nuclear Grade is tested for contaminants of sulfur, halogens, and low-melt metals. Each container of Nuclear Grade is labeled with the lot and test report number to certify purity.

TS-115 Corrosion Control Grease

TS-115 Corrosion Control Grease is a multipurpose, high temperature bearing and machinery grease for industrial applications where salt water, acid vapors, or chemicals cause corrosion. It has a high melting point, over 500 degrees F, and resists water washout.

TS-65 Multi Purpose Moly Grease

TS-65 M.P. Moly Grease is a multipurpose, semi-synthetic inorganic wheel bearing and chassis grease with moly. It is water insoluble and withstands high temperatures. TS-65 is an extreme pressure grease making it suitable for heavy duty industrial uses.

TS-209-0 O.G.L. Outside Gear Lubricant

TS-209-0 O.G.L. Outside Gear Lubricant is an inorganic thickened, heavy duty, extreme pressure grease designed for spur and bull or rack and pinion gears with heavily loaded slow moving gears. Resistant to water wash-out.

TS-210 EP open gear grease

TS-210 SeaSafe(TM) Leg Dope and Cable Lube is an EP open gear grease that has passed for use in environmentally-sensitive waters, such as the Gulf of Mexico. It has excellent extreme pressure performance. TS-210 is environmentally and hygienically safe, but not biodegradable.

TS-70 Moly Paste

TS-70 Moly Paste is a thread compound with 70% molybdenum disulfide, and is especially suitable for wet or corrosive conditions, including subsea applications. It has highly consistent torque values for makeup and breakout.

TS-90 Mud Pump Additive

TS-90 Moly Gear Concentrate is an additive for all types of gear oils to lower friction and to improve the film-forming abilities of the oil. It should be added to gear oils at a ratio mixture of 1:9

W15/CAMERON/LUBRIPLATE Martin Decker W15 MD Totco Fluid

Martin Decker W15 Red All Purpose Fluid for weight indicator sensors, lubricators on rig floor, mud pump and stand pipe pressure gauge, etc 1 Quart OEM Packs

Cameron TF-41 Grease

Project Sales Corp imports and stocks the OEM Cameron Valve Lubricant TF-41 for use in subsea lubrication application for choke/manifold usage. Available in 20 lb pails. PART# 700668

Lubriplate 630 AA Grease

LUBRIPLATE No. 630-AA is an NLGI No. 1 lubricant and the most popular multipurpose general grease. Ideal for automatic dispensing systems and centralized systems with large lines. Available in 35 lbs pails. ADVANTAGES - Water resistant. - Excellent grease mobility in constant service applications. - High anti-wear for extra lubricity. - Oxidation inhibited. - Wide operating temperature range.