bearing inspection report - amazon s3 · 4/12/2016 · end user georgia pacific contact paul grey,...
TRANSCRIPT
#4PM 2nd Press Roll 1824
Bearing Inspection Report
Georgia Pacific
Big Island, VA
Tuesday - April 12, 2016
End User
Georgia Pacific
Contact
Paul Grey, Cory Hank, StacyTaylor
Address
9363 Lee Jackson Hwy
City, State, Zip
Big Island, VA, 24526
Phone
434-299-7337
[email protected]; cory.hank@…
SKF TM/ IS
John Croarkin / Bobby DwayneScott
Equipment
#4PM
Distributor
Motion Industrial Technologies
Contact
Jim Rebok
Address
3719 Tom Andrews Rd Suite 1
City, State, Zip
Roanoke, VA, 24019
Phone
540-362-7695
Application
2nd Press Roll
Vendor
Precision Roll Grinders
Contact
Jim Bealer
Address
6356 Chapmans Rd
City, State, Zip
Allentown, PA, 18106
Phone
610-395-6966 x241
james.bealer@precisionrollgrind…
Vendor Job #
J17042
Serial#
1824
Inspection Date: 2016-04-11 Travel Time: 1 hours Inspection Time: 2 hours
Bobby Dwayne Scott Pulp and PaperSpecialist - SKFGarner, NC 27529 / (919) 670-6389
http://www.SKF.com
Inspected by Bill Bonis
Bearing Inspection Report
As always, we appreciate the opportunity to be of service. Please contact me if you have any questionsand/or/comments.Kind Regards,
This report is confidential and proprietary to SKF and may not bedisclosed to any third party without the express written consent ofSKF. Use of this report is limited to the sole purpose for which itwas provided.
Outer Ring Outside Diameter (OD)5.3.3.2 - Fretting corrosion - Minor
Outer Ring Raceway (ORR)5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
Inner Ring Raceway (IRR)5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
Lubrication: oil
Inner Ring Bore5.3.3.2 - Fretting corrosion - Minor
Rolling Elements5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
CageNormal
Tending Bearing Inspection
Georgia Pacific #4PM 1824 2nd Press Roll
Recommendations: Reuse Bearing Remanufacture Bearing Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material,and protected during storage prior to re-installation on journal bearing seat, per SKF.
Bearing Nomenclature: Inner Race Rotation Outer Race Rotation
SKF 23096 CAK/C3W33 N/A REMAN: RG 99-6164-R-1-P G (2010)
Comments:
Review recent oil analysis reports. Inspect lubrication filtration system.
Inspection Findings:
Tending Bearing Images
Outer Ring Outside Diameter Photo 1
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Outside Diameter Photo 2
Tending Bearing Images
Outer Ring Raceway Photo 1
5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2
5.2.2 - Abrasive wear - Minor
Tending Bearing Images
Inner Ring Raceway Photo 1
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Inner Ring Raceway Photo 2
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Tending Bearing Images
Inner Ring Bore Photo 1
5.3.3.2 - Fretting corrosion - Minor
Inner Ring Bore Photo 2
5.3.3.2 - Fretting corrosion - Minor
Tending Bearing Images
Rolling Elements Photo 1
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Rolling Elements Photo 2
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Outer Ring Outside Diameter (OD)5.3.3.2 - Fretting corrosion - Moderate5.3.2 - Moisture corrosion -@ Minor
Outer Ring Raceway (ORR)5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
Inner Ring Raceway (IRR)5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
Lubrication: oil
Inner Ring Bore5.3.3.2 - Fretting corrosion - Minor
Rolling Elements5.2.2 - Abrasive wear - Minor5.5.3 - Indentation from debris - Minor
CageNormal
Drive Bearing Inspection
Georgia Pacific #4PM 1824 2nd Press Roll
Recommendations: Reuse Bearing Remanufacture Bearing Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material,and protected during storage prior to re-installation on journal bearing seat, per SKF.
Bearing Nomenclature: Inner Race Rotation Outer Race Rotation
SKF 23096 CAK/C3W33 U (1999) REMAN: RG 99-6164-R-2-P G (2010)
Comments:
Review recent oil analysis reports. Inspect lubrication filtration system.
Inspection Findings:
Drive Bearing Images
Outer Ring Outside Diameter Photo 1
5.3.3.2 - Fretting corrosion - Moderate
5.3.2 - Moisture corrosion - Minor
Outer Ring Outside Diameter Photo 2
Drive Bearing Images
Outer Ring Raceway Photo 1
5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2
5.2.2 - Abrasive wear - Minor
Drive Bearing Images
Inner Ring Raceway Photo 1
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Inner Ring Raceway Photo 2
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Drive Bearing Images
Inner Ring Bore Photo 1
5.3.3.2 - Fretting corrosion - Minor
Inner Ring Bore Photo 2
Drive Bearing Images
Rolling Elements Photo 1
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
Rolling Elements Photo 2
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor
