bearings - eis-inc.com · pdf fileno symbol: open l, ll: 1 seal, double seal z, zz: 1 shield,...

BE

AR

ING

SPhone: 800.774.4643 • Fax: 800.768.9782

BEARINGS

RADIAL BALL BEARINGS ..........................................................................................................................................5-86000 SERIES ................................................................................................................................................................................66200 SERIES ................................................................................................................................................................................76300 SERIES ................................................................................................................................................................................8

ANGULAR CONTACT BEARINGS ..........................................................................................................................9-127200B SERIES............................................................................................................................................................................107300B SERIES............................................................................................................................................................................11DOUBLE ROW ANGULAR CONTACT BEARINGS 5200 SERIES ..........................................................................................12

MICRO/MINI BEARINGS ............................................................................................................................................13

SPINDLE BEARINGS ..............................................................................................................................................15-167000/7200 SERIES ....................................................................................................................................................................16

CYLINDRICAL ROLLER BEARINGS N, NU, NJ ....................................................................................................17-19200 SERIES ................................................................................................................................................................................18300 SERIES ................................................................................................................................................................................19

SPHERICAL ROLLER BEARINGS ..........................................................................................................................21-24SHAKER SCREEN BEARINGS ..................................................................................................................................................23SPHERICAL THRUST BEARINGS ............................................................................................................................................24

BEARING ACCESSORIES ......................................................................................................................................25-39EZE-SLEEVE® ............................................................................................................................................................................26CAST IRON OVERSIZE EZE-SLEEVE®......................................................................................................................................27INSULATED IEZE-SLEEVE® ......................................................................................................................................................28EZE-SLEEVE® STEEL SHAFT REPAIR SLEEVES......................................................................................................................29TOLERANCE RINGS..................................................................................................................................................................30WAVY SPRING WASHERS ......................................................................................................................................................31LOCK NUTS/LOCK WASHERS ................................................................................................................................................32COMPOUNDS – THREAD LOCKING........................................................................................................................................33COMPOUNDS – RETAINGING ................................................................................................................................................33SNAP RINGS ............................................................................................................................................................................34SHAFT GROUNDING BRUSHES..............................................................................................................................................35BTD’S ........................................................................................................................................................................................36MOTOR SHAFT FLINGERS ......................................................................................................................................................37DOW CORNING INDUSTRIAL LUBRICANTS ....................................................................................................................38-39

BEARING TOOLS....................................................................................................................................................41-47PORTABLE HYDRAULIC PULLEY PULLER ..............................................................................................................................42POSI LOCK™ PULLERS ............................................................................................................................................................43BALL BEARING INSTALLER KIT ..............................................................................................................................................44BALL BEARING PULLER ADAPTERS ......................................................................................................................................44STANLEY COMPO-CAST® HAMMERS ....................................................................................................................................44BEARING HEATERS ..................................................................................................................................................................45DAKE ARBOR PRESSES......................................................................................................................................................46-48IRD 206 VIBRATION METER ....................................................................................................................................................49ACCUSHIM SHAFT HOG PRECISION LASER SHAFT ALIGNMENT SYSTEM ....................................................................50

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale.NTN is a registered trademark of NTN Corporation of America. Essex Brownell is not affiliated with NTN Corporation of America.SKF is a registered trademark of SKF Corporation. Essex Brownell is not affiliated with the SKF Corporation.

3

Phone: 800.774.4643 • Fax: 800.768.9782

Table of Contents

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale.NTN is a registered trademark of NTN Corporation of America. Essex Brownell is not affiliated with NTN Corporation of America.

SKF is a registered trademark of SKF Corporation. Essex Brownell is not affiliated with the SKF Corporation.

4

Phone: 800.774.4643 • Fax: 800.768.9782


5

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING NUMBERING SYSTEMSRADIAL BALL BEARINGS

S26LL6 2 0 3 NR

SealedShield

C3

InternalClearance

Base Number

RingModification

SpecialFeaturesSeries

BoreDiameter

Series60 Extra light62 Light series63 Medium duty64 Heavy duty52 Double row light53 Double row medium

Bore Size00: 10 mm01: 12 mm02: 15 mm03: 17 mm04: 20 mm05: 25 mm06: 30 mmContinues bore X 5 = bore in mm

Sealed or ShieldedNo Symbol: OpenL, LL: 1 seal, double sealZ, ZZ: 1 shield, double shieldedRS, 2RS: 1 seal, double sealLLU: Contact seal (NTN)LLB: Non-contact seal (NTN)DDU: Sealed (NSK)DD: KBC

Ring ModificationN: Snap ring grooveNR: Snap ring groove with ring included

Internal Clearance (if listed)C0: Less clearanceC3: Standard clearance USAC4: Greater clearance than C3

Special FeaturesS26: 150°C (Nachi)S28: 200°C (Nachi)S0: 150°C (SKF)S1: 200°C (SKF)S2: 250°C (SKF)MC3VL0241: Insulated (SKF)7MR: Insulated (prefix NTN)J20A: Insulated (FAG)3NC: Insulated Ceramic Ball

(prefix Koyo)



6

Phone: 800.774.4643 • Fax: 800.768.9782

6000 SERIESThe Extra Light Series consists of single row radial Conrad-type bearings made with bores from 10 mm to 180 mm for light tomoderate radial loads, two-directional thrust loads, or a combination of both, where space is somewhat limited. This series isavailable in open, shielded, or sealed types, as well as with snap rings.

K5 fit Shaft H7 fit Housing Dimensions Dimensions

ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Snap Ring Min Max Min Max

10 0.3937 26 1.0236 8 0.3150 6000 X X X X 0.3937 0.3940 1.0236 1.024412 0.4724 28 1.1024 8 0.3150 6001 X X X X 0.4724 0.4728 1.1024 1.103215 0.5906 32 1.2598 9 0.3543 6002 X X X X 0.5906 0.5910 1.2598 1.260817 0.6693 35 1.3780 10 0.3937 6003 X X X X 0.6693 0.6697 1.3780 1.379020 0.7874 42 1.6535 12 0.4724 6004 X X X X 0.7875 0.7878 1.6535 1.654525 0.9843 47 1.8504 12 0.4724 6005 X X X X 0.9844 0.9847 1.8504 1.851430 1.1811 55 2.1654 13 0.5118 6006 X X X X 1.1812 1.1815 2.1654 2.166635 1.3780 62 2.4409 14 0.5512 6007 X X X X 1.3781 1.3785 2.4409 2.442140 1.5748 68 2.6772 15 0.5906 6008 X X X X 1.5749 1.5753 2.6772 2.678445 1.7717 75 2.9528 16 0.6299 6009 X X X X 1.7718 1.7722 2.9528 2.954050 1.9685 80 3.1496 16 0.6299 6010 X X X X 1.9686 1.9690 3.1496 3.150855 2.1654 90 3.5433 18 0.7087 6011 X X X X 2.1655 2.1660 3.5433 3.544760 2.3622 95 3.7402 18 0.7087 6012 X X X X 2.3623 2.3628 3.7402 3.741665 2.5591 100 3.9370 18 0.7087 6013 X X X X 2.5592 2.5597 3.9370 3.938470 2.7559 110 4.3307 20 0.7874 6014 X X X X 2.7560 2.7565 4.3307 4.332175 2.9528 115 4.5276 20 0.7874 6015 X X X X 2.9529 2.9534 4.5276 4.529080 3.1496 125 4.9213 22 0.8661 6016 X X X X 3.1497 3.1502 4.9213 4.922985 3.3465 130 5.1181 22 0.8661 6017 X X X X 3.3466 3.3472 5.1181 5.119790 3.5433 140 5.5118 24 0.9449 6018 X X X X 3.5434 3.5440 5.5118 5.513495 3.7402 145 5.7087 24 0.9449 6019 X X X X 3.7403 3.7409 5.7087 5.7103100 3.9370 150 5.9055 24 0.9449 6020 X X X X 3.9371 3.9377 5.9055 5.9071105 4.1339 160 6.2992 26 1.0236 6021 X X X X 4.1340 4.1346 6.2992 6.3008110 4.3307 170 6.6929 28 1.1024 6022 X X X X 4.3308 4.3314 6.6929 6.6945120 4.7244 180 7.0866 28 1.1024 6024 X X X 4.7245 4.7251 7.0866 7.0885130 5.1181 200 7.8740 33 1.2992 6026 X X 5.1182 5.1189 7.8740 7.8758140 5.5118 210 8.2677 33 1.2992 6028 X X 5.5119 5.5126 8.2677 8.2695150 5.9055 225 8.8583 35 1.3780 6030 X X 5.9056 5.9063 8.8583 8.8601160 6.2992 240 9.4488 38 1.4961 6032 X X 6.2993 6.3000 9.4488 9.4506170 6.6929 260 10.2362 42 1.6535 6034 X X 6.6930 6.6937 10.2362 10.2382180 7.0866 280 11.0236 46 1.8110 6036 X X 7.0867 7.0874 11.0236 11.0256

Determine the base number of the bearing required. Specify the brand of bearing, and enclosure or feature required.Steps to build a part number: Brand Code - Base # - Enclosure - FeatureExample: Nachi bearing with shields & snap ring NA-6020-ZZ-NR

Brand Code Enclosure Code Feature Code

SKF SKF Sealed -LL Snap Ring & Groove -NRNachi NA Shielded -ZZ Heat Stabliized -S286NTN NTN Open Leave Blank C4 Intenal Clearance -C4KBC NB Single Seal -LFAG FAG Single Shield -ZNSK NSK


7

Phone: 800.774.4643 • Fax: 800.768.9782

6200 SERIESLight Series bearings are single row radial Conrad-type bearings made with bores from 10 mm to 220 mm. They are used in applications with moderate to heavy radial loads, two-directional thrust loads, or a combination of both. This series is available in open, shielded, or sealed types, as well as with snap rings.


ID (mm) ID (in) OD (mm) OD (in) Width(mm) Width(in) Base # Open Shielded Sealed Snap Ring Min Max Min Max

10 0.3937 30 1.1811 9 0.3543 6200 X X X X 0.3937 0.3940 1.8110 1.181912 0.4724 32 1.2598 10 0.3937 6201 X X X X 0.4724 0.4728 1.2598 1.260812.7 0.5000 32 1.2598 10 0.3937 6201-08 X X X 1.2598 1.260812.7 0.5000 40 1.5748 12 0.4724 6202-08 X X X 1.5748 1.575813 0.5118 32 1.2598 10 0.3937 6201-13 X X X 1.2598 1.260815 0.5906 35 1.3780 11 0.4331 6202 X X X X 0.5906 0.5910 1.3780 1.379015.875 0.6250 35 1.3780 11 0.4331 6202-10 X X X 1.3780 1.379016 0.6299 35 1.3780 11 0.4331 6202-16 X X X 1.3780 1.379017 0.6693 40 1.5748 12 0.4724 6203 X X X X 0.6693 0.6697 1.5748 1.575819.05 0.7500 40 1.5748 12 0.4724 6203-12 X X X 1.5748 1.575820 0.7874 47 1.8504 14 0.5512 6204 X X X X 0.7875 0.7878 1.8504 1.851422.225 0.8750 47 1.8504 14 0.5512 6204-14 X X X 1.8504 1.851425 0.9843 52 2.0472 15 0.5906 6205 X X X X 0.9844 0.9847 2.0472 2.048430 1.1811 62 2.4409 16 0.6299 6206 X X X X 1.1812 1.1815 2.4409 2.442135 1.3780 72 2.8346 17 0.6693 6207 X X X X 1.3781 1.3785 2.8346 2.835840 1.5748 80 3.1496 18 0.7087 6208 X X X X 1.5749 1.5753 3.1496 3.150845 1.7717 85 3.3465 19 0.7480 6209 X X X X 1.7718 1.7722 3.3465 3.347950 1.9685 90 3.5433 20 0.7874 6210 X X X X 1.9686 1.9690 3.5433 3.544755 2.1654 100 3.9370 21 0.8268 6211 X X X X 2.1655 2.1660 3.9370 3.938460 2.3622 110 4.3307 22 0.8661 6212 X X X X 2.3623 2.3628 4.3307 4.332165 2.5591 120 4.7244 23 0.9055 6213 X X X X 2.5592 2.5597 4.7244 4.725870 2.7559 125 4.9213 24 0.9449 6214 X X X X 2.7560 2.7565 4.9213 4.922975 2.9528 130 5.1181 25 0.9843 6215 X X X X 2.9529 2.9534 5.1181 5.119780 3.1496 140 5.5118 26 1.0236 6216 X X X X 3.1497 3.1502 5.5118 5.513485 3.3465 150 5.9055 28 1.1024 6217 X X X X 3.3466 3.3472 5.9055 5.907190 3.5433 160 6.2992 30 1.1811 6218 X X X X 3.5434 3.5440 6.2992 6.300895 3.7402 170 6.6929 32 1.2598 6219 X X X X 3.7403 3.7409 6.6929 6.6945100 3.9370 180 7.0866 34 1.3386 6220 X X X X 3.9371 3.9377 7.0866 7.0885105 4.1339 190 7.4803 36 1.4173 6221 X X X X 4.1340 4.1346 7.4803 7.4821110 4.3307 200 7.8740 38 1.4961 6222 X X X X 4.3308 4.3314 7.8740 7.8758120 4.7244 215 8.4646 40 1.5748 6224 X X X 4.7245 4.7251 8.4646 8.4664130 5.1181 230 9.0551 40 1.5748 6226 X X 5.1182 5.1189 9.0551 9.0569140 5.5118 250 9.8425 42 1.6535 6228 X X 5.5119 5.5126 9.8425 9.8443150 5.9055 270 10.6299 45 1.7717 6230 X X 5.9056 5.9063 10.6299 10.6319160 6.2992 290 11.4173 48 1.8898 6232 X X 6.2993 6.3000 11.4173 11.4193170 6.6929 310 12.2047 52 2.0472 6234 X X 6.6930 6.6937 12.2047 12.2067180 7.0866 320 12.5984 52 2.0472 6236 X 7.0867 7.0874 12.5984 12.6006190 7.4803 340 13.3858 55 2.1654 6238 X 7.4805 7.4812 13.3858 13.3880200 7.8740 360 14.1732 58 2.2835 6240 X 7.8742 7.8749 14.1732 14.1754220 8.6614 400 15.7480 65 2.5591 6244 X 8.6616 8.6623 15.7480 15.7502

Determine the base number of the bearing required. Specify the brand of bearing, and enclosure or feature required.Steps to build a part number: Brand Code - Base # - Enclosure - FeatureExample: Nachi bearing open no enclosure: NA-6220Brand Code Enclosure Code Feature Code

SKF SKF Sealed -LL Snap Ring & Groove -NRNachi NA Shielded -ZZ Heat Stabliized -S286NTN NTN Open Leave Blank C4 Intenal Clearance -C4KBC NB Single Seal -LFAG FAG Single Shield -Z



8

Phone: 800.774.4643 • Fax: 800.768.9782

6300 SERIESThe Medium Series consists of single row radial Conrad-type bearings made with bores from 10 mm to 180 mm for light to moder-ate radial loads, two-directional thrust loads, or a combination of both, where space is somewhat limited. This series is availablein open, shielded, or sealed types, as well as with snap rings.


ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Snap Ring Min Max Min Max

10 0.3937 35 1.3780 11 0.4331 6300 X X X X 0.3937 0.3940 1.3780 1.378912 0.4724 37 1.4567 12 0.4724 6301 X X X X 0.4725 0.4728 1.4567 1.457715 0.5906 42 1.6535 13 0.5118 6302 X X X X 0.5906 0.5909 1.6535 1.654515.875 0.6250 40 1.5748 12 0.4724 6302-10 X X X 1.5748 1.575816 0.6299 40 1.5748 12 0.4724 6302-16 X X X 1.5748 1.575817 0.6693 47 1.8504 14 0.5512 6303 X X X X 0.6693 0.6696 1.8504 1.851420 0.7874 52 2.0472 15 0.5906 6304 X X X X 0.7875 0.7878 2.0472 2.048425 0.9843 62 2.4409 17 0.6693 6305 X X X X 0.9843 0.9847 2.4409 2.442130 1.1811 72 2.8346 19 0.7480 6306 X X X X 1.1812 1.1815 2.8346 2.835835 1.3780 80 3.1496 21 0.8268 6307 X X X X 1.3780 1.3785 3.1496 3.150840 1.5748 90 3.5433 23 0.9055 6308 X X X X 1.5749 1.5753 3.5433 3.544745 1.7717 100 3.9370 25 0.9843 6309 X X X X 1.7718 1.7722 3.9370 3.938450 1.9685 110 4.3307 27 1.0630 6310 X X X X 1.9686 1.9690 4.3307 4.332155 2.1654 120 4.7244 29 1.1417 6311 X X X X 2.1654 2.1659 4.7244 4.725860 2.3622 130 5.1181 31 1.2205 6312 X X X X 2.3623 2.3628 5.1181 5.119765 2.5591 140 5.5118 33 1.2992 6313 X X X X 5.5591 2.5596 5.5118 5.513470 2.7559 150 5.9055 35 1.3780 6314 X X X X 2.7560 2.7565 5.9055 5.907175 2.9528 160 6.2992 37 1.4567 6315 X X X X 2.9528 2.9533 6.2992 6.300880 3.1496 170 6.6929 39 1.5354 6316 X X X X 3.1497 3.1508 6.6929 6.694585 3.3465 180 7.0866 41 1.6142 6317 X X X X 3.3466 3.3472 7.0866 7.088290 3.5433 190 7.4803 43 1.6929 6318 X X X X 3.5434 3.5440 7.4803 7.482195 3.7402 200 7.8740 45 1.7717 6319 X X X X 3.7403 3.7409 7.8740 7.8758100 3.9370 215 8.4646 47 1.8504 6320 X X X X 3.9371 3.9377 8.4646 8.4664105 4.1339 225 8.8583 49 1.9291 6321 X X X X 4.1340 4.1346 8.8601 8.8583110 4.3307 240 9.4488 50 1.9685 6322 X X X 4.3308 4.3314 9.4506 9.4488120 4.7244 260 10.2362 55 2.1654 6324 X X 4.7245 4.7251 10.2382 10.2362130 5.1181 280 11.0236 58 2.2835 6326 X X 5.1182 5.1189 11.0256 11.0236140 5.5118 300 11.8110 62 2.4409 6328 X X 5.5119 5.5126 11.8130 11.8110150 5.9055 320 12.5984 65 2.5591 6330 X 5.9056 5.9063 12.6006 12.5984160 6.2992 340 13.3858 68 2.6772 6332 X 6.2993 6.3000 13.3880 13.3858170 6.6929 360 14.1732 72 2.8346 6334 X 6.6930 6.6937 14.1754 14.1732180 7.0866 380 14.9606 75 2.9528 6336 X 7.0867 7.0874 14.9628 14.9606

Determine the base number of the bearing r equired. Specify the brand of bearing, and enclosure or feature required.Steps to build a part number: Brand Code - Base # - Enclosure - FeatureExample: Nachi bearing open no enclosure: NA-6330


SKF SKF Sealed -LL Snap Ring & Groove -NRNachi NA Shielded -ZZ Heat Stabliized -S286NTN NTN Open Leave Blank C4 Intenal Clearance -C4KBC NB Single Seal -LFAG FAG Single Shield -ZNSK NSK


9

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING NUMBERING SYSTEMSANGULAR CONTACT BEARINGS

1 07 3 B L1 G

Basic Number Cage

BoreDiameter

ContactAngle

FlushGroundSeries

Series3: Double row with filling slot3: SKF-European designation for double row (SKF only)5: Double row without filling slot7: Single row angular contact

Bore Size00: 10 mm 01: 12 mm02: 15 mm 03: 17 mm04: 20 mm 05: 25 mm06: 30 mm Continues bore X 5 = bore in mm

Contact AngleB: 40° contact angleC: 15° contact angleBE: 40° extra capacity (SKF only)

Cage DesignationsM, MU: Machined bronze (Nachi, Koyo, NSK)L1B: Bronze cage, ball riding design (NTN)L1: Bronze (NTN)Y: Nylon (Nachi)ST: Steel (Nachi)J: Pressed steel (NTN)T1: Phenolic (NTN)T2: Plastic, Nylon or Teflon (NTN)Y: Pressed brass (SKF)J: Pressed steel (SKF)P: Polyimide (SKF)M: Machined brass (SKF, NSK)MPUA: Machined brass (FAG)Y: Pressed brass (NSK)

Flush GroundCB: Flush ground (SKF)G: Flush ground (NTN, NSK)

ToleranceP5: ISO Class 5 (ABEC 5)P4: ISO Class 4 (ABEC 7)P6: ISO Class 6 (ABEC 3)

Most Common Suffix40°, Bronze, Flush Ground

BMU: Nachi, KoyoBL1G: NTNBECBM: SKFBECBY: SKF (pressed bronze cage)BMPUA: FAGBMG: NSKBL1BG: NTN ball riding design

Double Row SuffixL, LL: 1 seal, double sealedZ, ZZ: 1 shield, double shieldBlank: OpenNR: Snap ring and groove



10

Phone: 800.774.4643 • Fax: 800.768.9782

ANGULAR CONTACT BEARINGSSingle row angular contact ball bearings feature raceways with high and low shoulders. Theseopposing raceways are designed to carry thrust load in one direction. The bearings in this seriesare assembled with a specific internal clearance so that they will have a specified contact angleunder load. In electric motor applications the standard contact angle is 40 degrees. These bearings feature a bronze cage and are flush ground for stacking.

7200B SERIESK5 fit Shaft H7 fit Housing Dimensions Dimensions

ID ID (in) OD OD (in) Width Width (in) Base # Min Max Min Max

10 0.3937 30 1.1811 9 0.3543 7200 0.3937 0.3940 1.1811 1.181912 0.4724 32 1.2598 10 0.3937 7201 0.4725 0.4729 1.2598 1.260815 0.5906 35 1.3780 11 0.4331 7202 0.5907 0.5911 1.3780 1.379017 0.6693 40 1.5748 12 0.4724 7203 0.6694 0.6698 1.5748 1.575820 0.7874 47 1.8504 14 0.5512 7204 0.7875 0.7879 1.8504 1.851425 0.9843 52 2.0472 15 0.5906 7205 0.9844 0.9848 2.0472 2.048430 1.1811 62 2.4409 16 0.6299 7206 1.1812 1.1816 2.4409 2.442135 1.3780 72 2.8346 17 0.6693 7207 1.3781 1.3785 2.8346 2.835840 1.5748 80 3.1496 18 0.7087 7208 1.5749 1.5753 3.1496 3.150845 1.7717 85 3.3465 19 0.7480 7209 1.7718 1.7722 3.3465 3.347850 1.9685 90 3.5433 20 0.7874 7210 1.9686 1.9690 3.5433 3.544755 2.1654 100 3.9370 21 0.8268 7211 2.1655 2.1660 3.9370 3.938460 2.3622 110 4.3307 22 0.8661 7212 2.3623 2.3628 4.3307 4.332165 2.5591 120 4.7244 23 0.9055 7213 2.5592 2.5597 4.7244 4.725870 2.7559 125 4.9213 24 0.9449 7214 2.7560 2.7565 4.9213 4.922875 2.9528 130 5.1181 25 0.9843 7215 2.9529 2.9534 5.1181 5.119780 3.1496 140 5.5118 26 1.0236 7216 3.1497 3.1502 5.5118 5.513485 3.3465 150 5.9055 28 1.1024 7217 3.3466 3.3472 5.9055 5.907190 3.5433 160 6.2992 30 1.1811 7218 3.5434 3.5440 6.2992 6.300895 3.7402 170 6.6929 32 1.2598 7219 3.7403 3.7409 6.6929 6.6945100 3.9370 180 7.0866 34 1.3386 7220 3.9371 3.9377 7.0866 7.0882105 4.1339 190 7.4803 36 1.4173 7221 4.1340 4.1346 7.4803 7.4821110 4.3307 200 7.8740 38 1.4961 7222 4.3308 4.3314 7.8740 7.8758120 4.7244 215 8.4646 40 1.5748 7224 4.7245 4.7251 8.4646 8.4664130 5.1181 230 9.0551 40 1.5748 7226 5.1182 5.1189 9.0551 9.0569140 5.5118 250 9.8425 42 1.6535 7228 5.5119 5.5126 9.8425 9.8443150 5.9055 270 10.6299 45 1.7717 7230 5.9056 5.9063 10.6299 10.6319160 6.2992 290 11.4173 48 1.8898 7232 6.2993 6.3000 11.4173 11.4193170 6.6929 310 12.2047 52 2.0472 7234 6.6930 6.6937 12.2047 12.2067180 7.0866 320 12.5984 52 2.0472 7236 7.0868 7.0875 12.5984 12.6006190 7.4803 340 13.3858 55 2.1654 7238 7.4805 7.4812 13.3858 13.3880

Duplex mounted bearings use a set of two (or more) on a common shaft with the inner and outer rings clamped solidly together. They are used to gain axial shaft control, rigidity and extracapacity. There are three fundamental combinations in duplex bearings: face-to-face (DF), back-to-back (DB), and tandem (DT).

Common Suffix

BMU 40 deg Bronze cage, flush ground

BL1G 40 deg 40 deg, Bronze cage, flush ground

BECBM 40 deg 40 deg, Machined Brass cage, flush ground

BECBY 40 deg 40 deg, Pressed Brass cage, flush ground

Steps to build a part number: Brand Code - Series and Bore diameter - Contact Angle and Cage DesignationExample: Nachi bearing series 72, 50mm bore diameter, 40° contact angle and machined bronzecage: NA-7210-BMU

Brand Code

SKF SKF

Nachi NA

NTN NTN

FAG FAG

MRC MRC

KOYO KOYO

NSK NSK


11

Phone: 800.774.4643 • Fax: 800.768.9782

Brand Code

SKF SKF

Nachi NA

NTN NTN

FAG FAG

MRC MRC

KOYO KOYO

NSK NSK

7300B SERIESK5 fit Shaft H7 fit Housing Dimensions Dimensions

ID ID (in) OD OD (in) Width Width (in) Base # Min Max Min Max

10 0.3937 35 1.3780 11 0.4331 7300 0.3937 0.3940 1.3780 1.379012 0.4724 37 1.4567 12 0.4724 7301 0.4725 0.4729 1.4567 1.457715 0.5906 42 1.6535 13 0.5118 7302 0.5907 0.5911 1.6535 1.654517 0.6693 47 1.8504 14 0.5512 7303 0.6694 0.6698 1.8504 1.851420 0.7874 52 2.0472 15 0.5906 7304 0.7875 0.7879 2.0472 2.048425 0.9843 62 2.4409 17 0.6693 7305 0.9844 0.9848 2.4409 2.442130 1.1811 72 2.8346 19 0.7480 7306 1.1812 1.1816 2.8346 2.835835 1.3780 80 3.1496 21 0.8268 7307 1.3781 1.3785 3.1496 3.150840 1.5748 90 3.5433 23 0.9055 7308 1.5749 1.5753 3.5433 3.544745 1.7717 100 3.9370 25 0.9843 7309 1.7718 1.7722 3.9370 3.938450 1.9685 110 4.3307 27 1.0630 7310 1.9686 1.9690 4.3307 4.332155 2.1654 120 4.7244 29 1.1417 7311 2.1655 2.1660 4.7244 4.725860 2.3622 130 5.1181 31 1.2205 7312 2.3623 2.3628 5.1181 5.119765 2.5591 140 5.5118 33 1.2992 7313 2.5592 2.5597 5.5118 5.513470 2.7559 150 5.9055 35 1.3780 7314 2.7560 2.7565 5.9055 5.907175 2.9528 160 6.2992 37 1.4567 7315 2.9529 2.9534 6.2992 6.300880 3.1496 170 6.6929 39 1.5354 7316 3.1497 3.1502 6.6929 6.694585 3.3465 180 7.0866 41 1.6142 7317 3.3466 3.3472 7.0866 7.088290 3.5433 190 7.4803 43 1.6929 7318 3.5434 3.5440 7.4803 7.482195 3.7402 200 7.8740 45 1.7717 7319 3.7403 3.7409 7.8740 7.8758100 3.9370 215 8.4646 47 1.8504 7320 3.9371 3.9377 8.4646 8.4664105 4.1339 225 8.8583 49 1.9291 7321 4.1340 4.1346 8.8583 8.8601110 4.3307 240 9.4488 50 1.9685 7322 4.3308 4.3314 9.4488 9.4506120 4.7244 260 10.2362 55 2.1654 7324 4.7245 4.7251 10.2362 10.2382130 5.1181 280 11.0236 58 2.2835 7326 5.1182 5.1189 11.0236 11.0256140 5.5118 300 11.8110 62 2.4409 7328 5.5119 5.5126 11.8110 11.8130150 5.9055 320 12.5984 65 2.5591 7330 5.9056 5.9063 12.5984 12.6006160 6.2992 340 13.3858 68 2.6772 7332 6.2993 6.3000 13.3858 13.3880

Duplex mounted bearings use a set of two (or more) on a common shaft with the inner and outer rings clamped solidly together. They are used to gain axial shaft control, rigidity and extracapacity. There are three fundamental combinations in duplex bearings: face-to-face (DF), back-to-back (DB), and tandem (DT).

Common Suffix

BMU 40 deg Bronze cage, flush ground

BL1G 40 deg Bronze cage, flush ground

BECBM 40 deg Machined Brass cage, flush ground

BECBY 40 deg Pressed Brass cage, flush ground

BMG 40 deg Bronze cage, flush ground

Steps to build a part number: Brand Code - Series and Bore diameter - Contact Angle and Cage DesignationExample: Nachi bearing series 73, 110mm bore diameter, 40° contact angle and machined bronzecage: NA-7322-BMU



12

Phone: 800.774.4643 • Fax: 800.768.9782

DOUBLE ROW ANGULAR CONTACT BEARINGSDouble row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows areso related that the contact angle is similar to a pair of back-to-back single row bearings. The 5200 and 5300 seriesoffer continuous races and can carry thrust loads in either direction.

5200 SERIESK5 fit Shaft H7 fit Housing Dimensions Dimensions

ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Min Max Min Max

10 0.3937 30 1.1811 14.3 0.5630 5200 X X X 0.3937 0.3940 1.1811 1.181912 0.4724 32 1.2598 15.9 0.6260 5201 X X X 0.4725 0.4729 1.2598 1.260815 0.5906 35 1.3780 15.9 0.6260 5202 X X X 0.5907 0.5911 1.3780 1.379017 0.6693 40 1.5748 17.5 0.6890 5203 X X X 0.6694 0.6698 1.5748 1.575820 0.7874 47 1.8504 20.6 0.8110 5204 X X X 0.7875 0.7879 1.8504 1.851425 0.9843 52 2.0472 20.6 0.8110 5205 X X X 0.9844 0.9848 2.0472 2.048430 1.1811 62 2.4409 23.8 0.9370 5206 X X X 1.1812 1.1816 2.4409 2.442135 1.3780 72 2.8346 27 1.0630 5207 X X X 1.3781 1.3785 2.8346 2.835840 1.5748 80 3.1496 30.2 1.1890 5208 X X X 1.5749 1.5753 3.1496 3.150845 1.7717 85 3.3465 30.2 1.1890 5209 X X X 1.7718 1.7722 3.3465 3.347850 1.9685 90 3.5433 30.2 1.1890 5210 X X X 1.9686 1.9690 3.5433 3.544755 2.1654 100 3.9370 33.3 1.3110 5211 X X X 2.1655 2.1660 3.9370 3.938460 2.3622 110 4.3307 36.5 1.4370 5212 X X X 2.3623 2.3628 4.3307 4.332165 2.5591 120 4.7244 38.1 1.5000 5213 X X X 2.5592 2.5597 4.7244 4.725870 2.7559 125 4.9213 39.7 1.5630 5214 X X 2.7560 2.7565 4.9213 4.922875 2.9528 130 5.1181 41.3 1.6260 5215 X X 2.9529 2.9534 5.1181 5.119780 3.1496 140 5.5118 44.4 1.7480 5216 X X 3.1497 3.1502 5.5118 5.513485 3.3465 150 5.9055 49.2 1.9370 5217 X X 3.3466 3.3472 5.9055 5.907190 3.5433 160 6.2992 52.4 2.0630 5218 X X 3.5434 3.5440 6.2992 6.300895 3.7402 170 6.6929 55.6 2.1890 5219 X 3.7403 3.7409 6.6929 6.6945100 3.9370 180 7.0866 60.3 2.3740 5220 X 3.9371 3.9377 7.0866 7.0882

5300 SERIESK5 fit Shaft H7 fit Housing Dimensions Dimensions

ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Min Max Min Max

15 0.5906 42 1.6535 19 0.7480 5302 X X X 0.5907 0.5911 1.6535 1.654517 0.6693 47 1.8504 22.2 0.8740 5303 X X X 0.6694 0.6698 1.8504 1.851420 0.7874 52 2.0472 22.2 0.8740 5304 X X X 0.7875 0.7879 2.0472 2.048425 0.9843 62 2.4409 25.4 1.0000 5305 X X X 0.9844 0.9848 2.4409 2.442130 1.1811 72 2.8346 30.2 1.1890 5306 X X X 1.1812 1.1816 2.8346 2.835835 1.3780 80 3.1496 34.9 1.3740 5307 X X X 1.3781 1.3785 3.1496 3.150840 1.5748 90 3.5433 36.5 1.4370 5308 X X X 1.5749 1.5753 3.5433 3.544745 1.7717 100 3.9370 39.7 1.5630 5309 X X X 1.7718 1.7722 3.9370 3.938450 1.9685 110 4.3307 44.4 1.7480 5310 X X X 1.9686 1.9690 4.3307 4.332155 2.1654 120 4.7244 49.2 1.9370 5311 X X 2.1655 2.1660 4.7244 4.725860 2.3622 130 5.1181 54 2.1260 5312 X X 2.3623 2.3628 5.1181 5.119765 2.5591 140 5.5118 58.7 2.3110 5313 X X 2.5592 2.5597 5.5118 5.513470 2.7559 150 5.9055 63.5 2.5000 5314 X X 2.7560 2.7565 5.9055 5.907175 2.9528 160 6.2992 68.3 2.6890 5315 X X 2.9529 2.9534 6.2992 6.300880 3.1496 170 6.6929 68.3 2.6890 5316 X X 3.1497 3.1502 6.6929 6.6945

Steps to build a part number: Brand Code - Series and Bore diameter - Contact Angle and Cage DesignationExample: Nachi bearing series 52, 50mm bore diameter, NA-5210


SKF SKF Sealed -LL Snap Ring & Groove -NRNachi NA Shielded -ZZNTN NTN Open Leave BlankFAG FAG


13

Phone: 800.774.4643 • Fax: 800.768.9782

MICRO/MINI BEARINGSINCH SERIES

Base Part # ID ID OD OD Width WidthOpen Inches mm Inches mm Inches mm

R2 0.1250 3.1750 0.3750 9.5250 0.1562 3.9670R3 0.1875 4.7620 0.5000 12.7000 0.1562 3.9670R4 0.2500 6.3500 0.6250 15.8750 0.1960 4.9780

R4A 0.2500 6.3500 0.7500 19.0499 0.2188 5.5575R6 0.3750 9.5250 0.8750 22.2250 0.2118 5.3797R8 0.5000 12.7000 1.1250 28.5750 0.2500 6.3500R10 0.6250 15.8750 1.3750 34.9250 0.2812 7.1425R12 0.7500 19.0500 1.6250 41.2750 0.3125 7.9375R14 0.8750 22.2250 1.8750 47.6250 0.3750 9.5250R16 1.0000 25.4000 2.0000 50.8000 0.3750 9.5250R18 1.1250 28.5750 2.1250 53.9750 0.3750 9.5250R20 1.2500 31.7500 2.2500 57.1500 0.3750 9.5250

Prefix: NA-, NB-Sealed and shielded bearings will have different widths.

MINATUREBase Part # ID (mm) OD (mm) Width (mm)

607 7 19 6608 8 22 7609 9 24 7623 3 10 4624 4 13 5625 5 16 5626 6 19 6627 7 22 7629 9 26 8634 4 16 5

Prefix: NA-, NB-

Suffix: -LL, -ZZ

FELT SEALBase Part # Base Part #

NB-87008 NB-WC87008NB-87009 NB-WC87009NB-87011 NB-WC87013NB-87013 NB-WC87016NB-87016 NB-WC87036NB-87036 NB-WC87037NB-87037 NB-WC87038NB-87038 NB-WC87039NB-87039 NB-WC87500NB-87500 NB-WC87501NB-87501 NB-WC87502NB-87502 NB-WC87503NB-87503 NB-WC87504NB-87504 NB-WC88054NB-87505 NB-WC88500NB-87506 NB-WC88501NB-87507 NB-WC88502NB-87508 NB-WC88503NB-88011NB-88013NB-88016NB-88500NB-88501NB-88502NB-88503NB-88504NB-88505NB-88506NB-88507NB-88508

Yo u r L i n k T o I n c r e d i b l e Q u a l i t y ™

AngularContact

SphericalRoller

Radial Ball UltraPrecision

Spherical Thrust

Cylindricalwww.nachiamerica.com

Whatever your application—from machine toolspindles to pumps to gear changers to heavymachinery—you can trust Nachi bearings toprovide you with the dependable quality youneed, every time. Our vertical integration givesus the industry’s most meticulous quality control.We produce bearings with our own tooling, onour own machine tools, using our own steel.There’s simply no weak link in our productionchain—so you’re assured of the performancethat meets your highest standards.


15

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING NUMBERING SYSTEMSSPINDLE BEARINGS

70 01 C Y DU L P4

BoreSize

CageType

Preload

ContactAngle Arrangment

PrecisionClass

DimensionalSeries

Dimensional Series70: 7000 series72: 7200 seriesBNHO: 7000 small ball

Bore Size00: 10 mm01: 12 mm02: 15 mm03: 17 mm04: 20 mm05: 25 mm06: 30 mmContinues bore X 5 = bore in mm

Contact AngleC: 15°A5: 25°

Cage TypeT: Machined phenolicA5: Molded polyimide

ArrangementDU: Duplex

PreloadGE: Extra light (Nachi)GL : Light (Nachi)GM : Medium (Nachi)GH : Heavy (Nachi)L : Light (NSK)M : Medium (NSK)H : Heavy (NSK)

Precision ClassP5: ISO Class 5P4: ISO Class 4P2: ISO Class 2PA5: ABEC 5 (NSK)PA7: ABEC 7 (NSK)PA9: ABEC 9 (NSK)



16

Phone: 800.774.4643 • Fax: 800.768.9782

SPINDLE BEARINGSSingle row angular contact spindle ball bearings feature a 15 degree contact angle. They aredesigned for grinding spindle applications that combine both radial and axial load carrying abilityin one bearings. They are manufactured to a high precision standard that ensures a virtuallyvibration-free operation.

7000/7200 SERIESID ID (in) OD OD (in) Width Width (in) Base #

10 0.3937 26 1.0236 8 0.3150 700010 0.3937 30 1.1811 9 0.3543 7200 12 0.4724 28 1.1024 8 0.3150 7001 12 0.4724 32 1.2598 10 0.3937 7201 15 0.5906 32 1.2598 9 0.3543 7002 15 0.5906 35 1.3780 11 0.4331 7202 17 0.6693 35 1.3780 10 0.3937 7003 17 0.6693 40 1.5748 12 0.4724 7203 20 0.7874 42 1.6535 12 0.4724 7004 20 0.7874 47 1.8504 14 0.5512 7204 25 0.9843 47 1.8504 12 0.4724 7005 25 0.9843 52 2.0472 15 0.5906 7205 30 1.1811 55 2.1654 13 0.5118 7006 30 1.1811 62 2.4409 16 0.6299 7206 35 1.3780 62 2.4409 14 0.5512 7007 35 1.3780 72 2.8346 17 0.6693 7207 40 1.5748 68 2.6772 15 0.5906 7008 40 1.5748 80 3.1496 18 0.7087 7208 45 1.7717 75 2.9528 16 0.6299 7009 45 1.7717 85 3.3465 19 0.7480 7209 50 1.9685 80 3.1496 16 0.6299 7010 50 1.9685 90 3.5433 20 0.7874 7210 55 2.1654 90 3.5433 18 0.7087 7011 55 2.1654 100 3.9370 21 0.8268 7211 60 2.3622 95 3.7402 18 0.7087 7012 60 2.3622 110 4.3307 22 0.8661 7212 65 2.5591 100 3.9370 18 0.7087 7013 65 2.5591 120 4.7244 23 0.9055 7213 70 2.7559 110 4.3307 20 0.7874 7015 70 2.7559 125 4.9213 24 0.9449 7214 75 2.9528 115 4.5276 20 0.7874 7015 75 2.9528 130 5.1181 25 0.9843 7215 80 3.1496 125 4.9213 22 0.8661 7016 80 3.1496 140 5.5118 26 1.0236 7216 85 3.3465 130 5.1181 22 0.8661 7017 85 3.3465 150 5.9055 28 1.1024 7217 90 3.5433 140 5.5118 24 0.9449 7018 90 3.5433 160 6.2992 30 1.1811 7218 95 3.7402 145 5.7087 24 0.9449 7019 95 3.7402 170 6.6929 32 1.2598 7219 100 3.9370 150 5.9055 24 0.9449 7020 100 3.9370 180 7.0866 34 1.3386 7220

Housing and shaft fits vary depending on the OEM.

Steps to build a part number: Brand Code - Base # - SuffixExample: NA-7012-CYDUP4

Common Suffix

-CYDUP4 Nachi

Brand Code

SKF SKF

Nachi NA

NSK NSK

MRC MRC

SKF/FAG/MRC NB


17

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING NUMBERING SYSTEMSCYLINDRICAL ROLLER BEARINGS

NU 2 0 4 E C3

Type

Basic Number

Cage(blank if

standard)

BoreDiameter

InternalDesign ClearanceSeries

TypeN: Two inner flanges – no outerNU: Two outer flanges – no innerNF: One lip outer ring with inner ring and roller assemblyNJ: Two outer flanges – one innerNH: NJ series bearing with HJ thrust collar (NJ+HJ=NH)NN: Double row precision cylindrical bearingsHJ: Separate thrust collarR, RN, RNU: Special cylindrical roller bearings

Series10: Extra light series2: Light series22: Light series extra wide23: Medium series extra wide3: Medium series4: Heavy series

Internal DesignE: High capacity cylindrical roller bearings

CageBronze, M, MV: BronzeST: SteelEG: Polyimide

Internal ClearanceNo suffix: Normal radial clearanceC3: Radial clearance greater than normalC4: Radial clearance greater than C3C5: Radial clearance greater than C4



18

Phone: 800.774.4643 • Fax: 800.768.9782

CYLINDRICAL ROLLER BEARINGS N, NU, NJIn applications where high radial capacity at very high speeds in relatively limited space is needed, cylindrical roller bearingsproved eminently successful. Cylindrical roller bearings, as the name implies, use cylindrical-shaped rollers as the rolling, load-carrying elements. Usually, the rollers are made with the length of the roller being equal to the diameter of the roller. Cylindricalroller bearings offer the highest radial-load capacity for a given bore and width of all types of rolling bearings. While they have no special field of appllications, cylindrical roller bearings are generally found in heavy-duty, power-producing, power-transmission, and power-absorbing machinery. In the N type, ther rollers run between two integral flanges attached to the inner ring; the outer ring is made without flanges.

In the NJ type, there are two flanges on the outer ring and one on the inner ring. This allows the cylindrical roller bearing to handle small axial loads. A common application for an NJ design cylinderical roller bearing is to locate the armature of the electrical traction motor used on diesel-electric locomotives.

The most common type of cylindrical roller bearing is the single row design, known as NU. In the NU type, the flanges are placedon the outer ring and the inner ring is made without flanges.

200 SERIESI.D. O.D. Width Recommended Shaft Fit Recommended Housing FitMM Inch MM Inch MM Inch Part Number Max Min Max Min

20 0.7874 47 1.8504 14 0.551 N,NJ,NU204 0.7878 0.7875 1.8514 1.850425 0.9843 52 2.0472 15 0.591 N,NJ,NU205 0.9847 0.9844 2.0484 2.047230 1.1811 62 2.4409 16 0.630 N,NJ,NU206 1.1815 1.1512 2.4421 2.440935 1.3780 72 2.8346 17 0.669 N,NJ,NU207 1.3785 1.3781 2.8358 2.834640 1.5748 80 3.1496 18 0.709 N,NJ,NU208 1.5753 1.5749 3.1508 3.149645 1.7717 85 3.3465 19 0.748 N,NJ,NU209 1.7725 1.7721 3.3479 3.346550 1.9685 90 3.5433 20 0.787 N,NJ,NU210 1.9693 1.9689 3.5447 3.543355 2.1654 100 3.9370 21 0.827 N,NJ,NU211 2.1663 2.1658 3.9384 3.93760 2.3622 110 4.3307 22 0.866 N,NJ,NU212 2.3631 2.3626 4.3321 4.330765 2.5591 120 4.7244 23 0.906 N,NJ,NU213 2.5600 2.5595 4.7258 4.724470 2.7559 125 4.9213 24 0.945 N,NJ,NU214 2.7568 2.7563 4.9229 4.921375 2.9528 130 5.1181 25 0.984 N,NJ,NU215 2.9537 2.9532 5.1197 5.118180 3.1496 140 5.5118 26 1.024 N,NJ,NU216 3.1505 3.1500 5.5134 5.511885 3.3465 150 5.9055 28 1.102 N,NJ,NU217 3.3476 3.3470 5.9071 5.905590 3.5433 160 6.2992 30 1.181 N,NJ,NU218 3.5444 3.5438 6.3008 6.299295 3.7402 170 6.6929 32 1.260 N,NJ,NU219 3.7413 3.7407 6.6945 6.6929100 3.9370 180 7.0866 34 1.339 N,NJ,NU220 3.9381 3.9375 7.0885 7.0866105 4.1339 190 7.4803 36 1.417 N,NJ,NU221 4.1353 4.1344 7.4821 7.4803110 4.3307 200 7.8740 38 1.496 N,NJ,NU222 4.3321 4.3312 7.8758 7.874120 4.7244 215 8.4646 40 1.575 N,NJ,NU224 4.7258 4.7249 8.4664 8.4646130 5.1181 230 9.0551 40 1.575 N,NJ,NU226 5.1197 5.1187 — —140 5.5118 250 9.8425 42 1.654 N,NJ,NU228 5.5134 5.5124 9.8443 9.8425150 5.9055 270 10.6299 45 1.772 N,NJ,NU230 5.9075 5.9066 — —160 6.2992 290 11.4173 48 1.890 N,NJ,NU232 6.3012 6.3003 — —170 6.6929 310 12.2047 52 2.047 N,NJ,NU234 6.6949 6.6940 12.2067 12.2047

Prefix: Suffix:NA- Nachi -BRONZE BronzeNB- SKF/FAG -ST Steel

-EMC3 Bronze, C3


19

Phone: 800.774.4643 • Fax: 800.768.9782

CYLINDRICAL ROLLER BEARINGS N, NU, NJ300 SERIES

I.D. O.D. Width Recommended Shaft Fit Recommended Housing FitMM Inch MM Inch MM Inch Part Number Max Min Max Min

20 0.7874 52 2.0472 15 0.591 N,NJ,NU304 0.7878 0.7875 2.0484 2.047225 0.9843 62 2.4409 17 0.669 N,NJ,NU305 0.9847 0.9847 2.4421 2.440930 1.1811 72 2.8346 19 0.748 N,NJ,NU306 1.1815 1.1512 2.8358 2.834635 1.3780 80 3.1496 21 0.827 N,NJ,NU307 1.3785 1.3781 3.1508 3.149640 1.5748 90 3.5433 23 0.906 N,NJ,NU308 1.5753 1.5749 3.5447 3.543345 1.7717 100 3.9370 25 0.984 N,NJ,NU309 1.7725 1.7721 3.9384 3.93750 1.9685 110 4.3307 27 1.063 N,NJ,NU310 19.6930 1.9689 4.3321 4.330755 2.1654 120 4.7244 29 1.142 N,NJ,NU311 2.1663 2.1658 4.7258 4.724460 2.3622 130 5.1181 31 1.220 N,NJ,NU312 2.3631 2.3626 5.1197 5.118165 2.5591 140 5.5118 33 1.299 N,NJ,NU313 2.5600 2.5595 5.5134 5.511870 2.7559 150 5.9055 35 1.378 N,NJ,NU314 2.7568 2.7863 5.9071 5.905575 2.9528 160 6.2992 37 1.457 N,NJ,NU315 2.9537 2.9532 6.3008 6.299280 3.1496 170 6.6929 39 1.535 N,NJ,NU316 3.1505 3.1500 6.6945 6.692985 3.3465 180 7.0866 41 1.614 N,NJ,NU317 3.3476 3.3470 7.0885 7.086690 3.5433 190 7.4803 43 1.693 N,NJ,NU318 3.5444 3.5438 7.4821 7.480395 3.7402 200 7.8740 45 1.772 N,NJ,NU319 3.7413 3.7407 7.8758 7.874100 3.9370 215 8.4646 47 1.850 N,NJ,NU320 3.9381 3.9375 8.4664 8.4646105 4.1339 225 8.8583 49 1.929 N,NJ,NU321 4.1353 4.1344 8.8601 8.8583110 4.3307 240 9.4488 50 1.969 N,NJ,NU322 4.3321 4.3312 9.4506 9.4488120 4.7244 260 10.2362 55 2.165 N,NJ,NU324 4.7258 4.7249 10.2382 10.2362130 5.1181 280 11.0236 58 2.283 N,NJ,NU326 5.1197 5.1187 11.0256 11.0236140 5.5118 300 11.8110 62 2.441 N,NJ,NU328 5.5134 5.5124 11.813 11.811150 5.9055 320 12.5984 65 2.559 N,NJ,NU330 5.9075 5.9066 12.6006 12.5984160 6.2992 340 13.3858 68 2.677 N,NJ,NU332 6.3012 6.3003 13.388 13.3858170 6.6929 360 14.1732 72 2.835 N,NJ,NU334 6.6949 6.6940 14.1754 14.1732

Prefix: Suffix:NA- Nachi -BRONZE BronzeNB- SKF/FAG -ST Steel

-EMC3 Bronze, C3

N Series NJ Series NU Series

NOTES



20

Phone: 800.774.4643 • Fax: 800.768.9782


21

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING NUMBERING SYSTEMSSPHERICAL ROLLER BEARINGS

E K2 2 1 0

InternalDesign

Cage

C3

Clearance

Base Number

BoreAngle

LubricationHole/Groove ToleranceSeries

2

BoreDiameter

Bore Diameter00: 10 mm01: 12 mm02: 15 mm03: 17 mm04: 20 mm05: 25 mm06: 30 mmContinues bore X 5 = bore in mm

Internal DesignE: Extra capacity (NTN)CC: Improved design (SKF)E: Standard roller type (Nachi)EX: Large symmetric roller (Nachi)AEX: Large asymmetric roller (Nachi)E: Improved capacity (SKF thrust)

Bore AngleNone: CylindricalK: 1:12 tapered bore

Series

CageNone: Pressed steel (Nachi)MY: Machined brass (Nachi)M2,M4: Machined bronze (SKF)J: Pressed steel (SKF, NTN)L1: Machined brass (NTN)T2: Nylon (NTN)

Lubrication Hole/GrooveNone: No hole or grooveW33: Hole and groove (SKF, Nachi)W20: Hole only (Nachi)D1: Hole and Groove (NTN)

ClearanceC3: Standard clearance USA

ToleranceVS1: C3 Shaker screen (NTN)VS2: C4 Shaker screen (NTN)W502: Shaker screen (SKF)

SPHERICAL ROLLER BEARINGSSpherical roller bearings have two rows of rollers in separate raceways. This allows the bearing to compensatefor angular thrust errors. They have large radial and thrust load capacity for heavy shock and impact loads, making them suitable for heavy industrial equipment. Spherical roller bearings are internally self-aligning; they can compensate for static misalignment caused by poorly aligned shafts as well as misalignments caused by shaft deflection.

Shaft Fit Dim Housing FitI.D. O.D. Width Normal Load Normal LoadMM Inch MM Inch MM Inch Part Number Max Min Max Min

40 1.5748 80 3.1496 23 0.906 22208 1.5753 1.5749 3.1508 3.149640 1.5748 90 3.5433 33 1.299 22308 1.5753 1.5749 3.5447 3.543345 1.7717 85 3.3465 23 0.906 22209 1.7725 1.7721 3.3479 3.346545 1.7717 100 3.9370 40 1.575 22309 1.7725 1.7724 3.9384 3.937050 1.9685 90 3.5433 23 0.906 22210 1.9693 1.9689 3.5447 3.543350 1.9685 110 4.3307 40 1.575 22310 1.9693 1.9689 4.3321 4.330755 2.1654 100 3.9370 25 0.984 22211 2.1663 2.1658 3.9384 3.937055 2.1654 120 4.7244 43 1.693 22311 2.1663 2.1658 4.7258 4.724460 2.3622 110 4.3307 28 1.102 22212 2.3631 2.3626 4.3321 4.330760 2.3622 130 5.1181 46 1.811 22312 2.3631 2.3626 5.1197 5.118165 2.5591 120 4.7244 31 1.220 22213 2.5600 2.5595 4.7258 4.724465 2.5591 140 5.5118 48 1.890 22313 2.5600 2.5595 5.5134 5.511870 2.7559 125 4.9213 31 1.220 22214 2.7568 2.7563 4.9229 4.921370 2.7559 150 5.9055 51 2.008 22314 2.7568 2.7563 5.9071 5.905575 2.9528 130 5.1181 31 1.220 22215 2.9537 2.9532 5.1197 5.118175 2.9528 160 6.2992 55 2.165 22315 2.9537 2.9532 6.3008 6.299280 3.1496 140 5.5118 33 1.299 22216 3.1505 3.1500 5.5134 5.511880 3.1496 170 6.6929 58 2.283 22316 3.1505 3.1500 6.6945 6.692985 3.3465 150 5.9055 36 1.417 22217 3.3479 3.3470 5.9071 5.905585 3.3465 180 7.0866 60 2.362 22317 3.3479 3.3470 7.0885 7.086690 3.5433 160 6.2992 40 1.575 22218 3.5447 3.5438 6.3008 6.299290 3.5433 190 7.4803 64 2.520 22318 3.5447 3.5438 7.4821 7.480395 3.7402 170 6.6929 43 1.693 22219 3.7416 3.7407 6.6945 6.692995 3.7402 200 7.8740 67 2.638 22319 3.7416 3.7407 7.8758 7.8740100 3.9370 180 7.0866 46 1.811 22220 3.9384 3.9375 7.0885 7.0866100 3.9370 215 8.4646 73 2.874 22320 3.7384 3.9375 8.4664 8.4646110 4.3307 200 7.8740 53 2.087 22222 4.3321 4.3312 7.8758 7.8740110 4.3307 240 9.4488 80 3.150 22322 4.3321 4.3312 9.4506 9.4488120 4.7244 215 8.4646 58 2.283 22224 4.7258 4.7249 8.4664 8.4646120 4.7244 260 10.2362 86 3.386 22324 4.7258 4.7249 10.2382 10.2362130 5.1181 280 11.0236 93 3.661 22326 5.1201 5.1192 11.0256 11.0236140 5.5118 250 9.8425 68 2.677 22228 5.5138 5.5129 9.8443 9.8425140 5.5118 300 11.8110 102 4.016 22328 5.5138 5.5129 11.8130 11.8110150 5.9055 320 12.5984 108 4.252 22330 5.9075 5.9066 12.6006 12.5984160 6.2992 340 13.3858 114 4.488 22332 6.3019 6.3009 13.3880 13.3858170 6.6929 310 12.2047 86 3.386 22234 6.6956 6.6946 12.2067 12.2047170 6.6929 360 14.1732 120 4.724 22334 6.6956 6.6946 14.1754 14.1732

To build a part number: Brand Code - Part Number - Suffix

Brand Code Suffix

Nachi NA -EW33

SKF SKF -CCEW33

SKF/FAG NB -VAJ



22

Phone: 800.774.4643 • Fax: 800.768.9782

SHAKER SCREEN BEARINGSA special form of the spherical roller bearing has been developed especially for shaker or vibrating screens used in mines, quarries, foundries, and similar applications. This bearing is essentially of the same construction as the regular spherical rollerbearing although there are several important differences. In a shaker screen application, the entire bearing is subjected to arotary motion which sets up a centrifugal force acting on the cage and all pans of the bearing. To meet this demanding condition,the spherical roller bearing for shaker screen operation has a unique cage design, permitting the bearing to operate at higheccentricity and great speed. Additionally, this special spherical roller bearing offers higher load-carrying capacity and longerlife than the standard spherical roller bearing.

Recommended RecommendedI.D. O.D. Width K6 Shaft Fit H7 Housing FitMM Inch MM Inch MM Inch Part Number Max Min Max Min

40 1.5748 90 3.5433 33 1.299 22308 1.5737 1.5743 3.5426 3.541245 1.7717 100 3.9370 40 1.575 22309 1.7706 1.7712 3.9363 3.934950 1.9685 110 4.3307 40 1.575 22310 1.9674 1.9680 4.3300 4.328655 2.1654 120 4.7244 43 1.693 22311 2.1641 2.1648 4.7237 4.722360 2.3622 130 5.1181 46 1.811 22312 2.3609 2.3616 5.1173 5.115765 2.5591 140 5.5118 48 1.890 22313 2.5578 2.5585 5.5110 5.509470 2.7559 150 5.9055 51 2.008 22314 2.7546 2.7553 5.9047 5.903175 2.9528 160 6.2992 55 2.165 22315 2.9515 2.9522 6.2982 6.296780 3.1496 170 6.6929 58 2.283 22316 3.1483 3.1490 6.6919 6.690485 3.3465 180 7.0866 60 2.362 22317 3.3448 3.3457 7.0856 7.084190 3.5433 190 7.4803 64 2.520 22318 3.5417 3.5425 7.4791 7.477495 3.7402 200 7.8740 67 2.638 22319 3.7385 3.7394 7.8728 7.8711100 3.9370 215 8.4646 73 2.874 22320 3.9354 3.9362 8.4634 8.4617110 4.3307 240 9.4488 80 3.150 22322 4.3291 4.3299 9.4476 9.4459120 4.7244 260 10.2362 86 3.386 22324 4.7228 4.7236 10.2348 10.2329

To build a part number: Brand Code - Part Number - Suffix

Brand Code Suffix

SKF SKF -M2W502

Nachi NA -AEXW33


23

Phone: 800.774.4643 • Fax: 800.768.9782

SPHERICAL THRUST BEARINGSSpherical roller thrust bearings are similar to double row spherical roller bearings, but have a greater contact angle. They areguided by ground flanges on the inner ring and operate against the spherical raceway in the outer ring. The contact angle isapproximately 45°. Machined cages are normally used, and oil lubrication is recommended.

Recommended RecommendedI.D. O.D. Width K6 Shaft Fit H7 Housing FitMM Inch MM Inch MM Inch Part Number Max Min Max Min

60 2.3622 130 5.1181 42 1.654 29412 2.3623 2.3630 5.1181 5.119765 2.5591 140 5.5118 45 1.772 29413 2.5592 2.5599 5.5118 5.513470 2.7559 150 5.9055 48 1.890 29414 2.7560 2.7567 5.9055 5.907175 2.9528 160 6.2992 51 2.008 29415 2.9529 2.9536 6.2992 6.300880 3.1496 170 6.6929 54 2.126 29416 3.1497 3.1504 6.6929 6.694585 3.3465 150 5.9055 39 1.535 29317 3.3466 3.3473 5.9055 5.907185 3.3465 180 7.0866 58 2.283 29417 3.3466 3.3475 7.0866 7.088290 3.5433 155 6.1024 39 1.535 29318 3.5434 3.5443 6.1024 6.104090 3.5433 190 7.4803 60 2.362 29418 3.5434 3.5443 7.4803 7.4819100 3.9370 170 6.6929 42 1.654 29320 3.9371 3.9380 6.6929 6.6945100 3.9370 210 8.2677 67 2.638 29420 3.9371 3.9380 8.2677 8.2695110 4.3307 190 7.4803 48 1.890 29322 4.3308 4.3317 7.4803 7.4821110 4.3307 230 9.0551 73 2.874 29422 4.3308 4.3317 9.0551 9.0569120 4.7244 210 8.2677 54 2.126 29324 4.7245 4.7254 8.2677 8.2695120 4.7244 250 9.8425 78 3.071 29424 4.7245 4.7254 9.8425 9.8443130 5.1181 225 8.8583 58 2.283 29326 5.1182 5.1192 8.8583 8.8601130 5.1181 270 10.6299 85 3.346 29426 5.1182 5.1192 10.6299 10.6319140 5.5118 240 9.4488 60 2.362 29328 5.5119 5.5129 9.4488 9.4506140 5.5118 280 11.0236 85 3.346 29428 5.5119 5.5129 11.0236 11.0256150 5.9055 250 9.8425 60 2.362 29330 5.9056 5.9066 9.8425 9.8443150 5.9055 300 11.8110 90 3.543 29430 5.9056 5.9066 11.8110 11.8130160 6.2992 270 10.6299 67 2.638 29332 6.2993 6.3003 10.6299 10.6319160 6.2992 320 12.5984 95 3.740 29432 6.2993 6.3003 12.5984 12.6006170 6.6929 280 11.0236 67 2.638 29334 6.6930 6.6940 11.0236 11.0256170 6.6929 340 13.3858 103 4.055 29434 6.6930 6.6940 13.3858 13.3880180 7.0866 300 11.8110 73 2.874 29336 7.0867 7.0877 11.8110 11.8130180 7.0866 360 14.1732 109 4.291 29436 7.0867 7.0877 14.1732 14.1754190 7.4803 320 12.5984 78 3.071 29338 7.4804 7.4816 12.5984 12.6006190 7.4803 380 14.9606 115 4.528 29438 7.4804 7.4816 14.9606 14.9628200 7.8740 340 13.3858 85 3.346 29340 7.8741 7.8753 13.3858 13.3880200 7.8740 400 15.7480 122 4.803 29440 7.8741 7.8753 15.7480 15.7502

Determine the base number of the bearing required. Specify the brand of bearing. Determin suffex by brand.

Brand Code

SKF E

Nachi EXApplication Note: The larger the size of the bore on a spherical thrust bearing, results in a slower bearing RPM rating. On applications such asdeep well pumps, where 1200 RPM and 1800 RPM motors are used in oil lubricated systems, it is recommended to verify the maximum speed rating of the bearing to be used. Speed ratings vary by bearing manufacturer. Exceeding the maximum speed rating of a bearing will result inpremature failure. Grease lubrication of spherical thrust bearings results in an even greater reduction in speed limits.



24

Phone: 800.774.4643 • Fax: 800.768.9782

25

Phone: 800.774.4643 • Fax: 800.768.9782

BEARING ACCESSORIES

EZE-SLEEVE® ................................................................................................................................26

CAST IRON OVERSIZE EZE-SLEEVE® ........................................................................................27

INSULATED IEZE-SLEEVE®..........................................................................................................28

EZE-SLEEVE® STEEL SHAFT REPAIR SLEEVES ........................................................................29

TOLERANCE RINGS ....................................................................................................................30

WAVY SPRING WASHERS ..........................................................................................................31

LOCK NUTS/LOCK WASHERS ....................................................................................................32

ADHESIVES – THREAD LOCKING ..............................................................................................33

ADHESIVES – RETAINING ..........................................................................................................33

SNAP RINGS ................................................................................................................................34

SHAFT GROUNDING BRUSHES ................................................................................................35

BTD’S ............................................................................................................................................36

MOTOR SHAFT FLINGERS..........................................................................................................37

DOW CORNING INDUSTRIAL LUBRICANTS........................................................................38-39

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale.26

Phone: 800.774.4643 • Fax: 800.768.9782

Part# Bearing Series Sleeve Length

EZ-3020 6200 - 20 mmEZ-3220 6201 - 20 mmEZ-3520 6202 6300 20 mmEZ-3720 - 6301 20 mmEZ-4020 6203 - 20 mmEZ-4220 - 6302 20 mmEZ-4720 6204 6303 20 mmEZ-5222 6205 6304 22 mmEZ-6230 6206 6305 30 mmEZ-6240 6206 6305 40 mmEZ-6250 6206 6305 50 mmEZ-7230 6207 6306 30 mmEZ-7240 6207 6306 40 mmEZ-7250 6207 6306 50 mmEZ-8030 6208 6307 30 mmEZ-8040 6208 6307 40 mmEZ-8050 6208 6307 50 mmEZ-8530 6209 - 30 mmEZ-8540 6209 - 40 mmEZ-8550 6209 - 50 mmEZ-9030 6210 6308 30 mmEZ-9040 6210 6308 40 mmEZ-9050 6210 6308 50 mmEZ-10030 6211 6309 30 mmEZ-10040 6211 6309 40 mmEZ-10050 6211 6309 50 mmEZ-11030 6212 6310 30 mmEZ-11040 6212 6310 40 mmEZ-11050 6212 6310 50 mmEZ-11060 6212 6310 60 mmEZ-12040 6213 6311 40 mmEZ-12050 6213 6311 50 mmEZ-12060 6213 6311 60 mmEZ-12070 6213 6311 70 mmEZ-12540 6214 - 40 mmEZ-12550 6214 - 50 mmEZ-12560 6214 - 60 mmEZ-12570 6214 - 70 mmEZ-13040 6215 6312 40 mmEZ-13050 6215 6312 50 mmEZ-13060 6215 6312 60 mmEZ-13070 6215 6312 70 mmEZ-14040 6216 6313 40 mmEZ-14050 6216 6313 50 mmEZ-14060 6216 6313 60 mmEZ-14070 6216 6313 70 mmEZ-15040 6217 6314 40 mmEZ-15050 6217 6314 50 mmEZ-15060 6217 6314 60 mmEZ-15070 6217 6314 70 mmEZ-16040 6218 6315 40 mmEZ-16050 6218 6315 50 mmEZ-16060 6218 6315 60 mmEZ-16070 6218 6315 70 mmEZ-17050 6219 6316 50 mmEZ-17060 6219 6316 60 mmEZ-17070 6219 6316 70 mmEZ-17080 6219 6316 80 mmEZ-18050 6220 6317 50 mmEZ-18060 6220 6317 60 mmEZ-18070 6220 6317 70 mmEZ-18080 6220 6317 80 mmEZ-19050 6221 6318 50 mm


EZ-19060 6221 6318 60 mmEZ-19070 6221 6318 70 mmEZ-19080 6221 6318 80 mmEZ-20050 6222 6319 50 mmEZ-20060 6222 6319 60 mmEZ-20070 6222 6319 70 mmEZ-20080 6222 6319 80 mmEZ-20090 6222 6319 90 mmEZ-21560 6224 6320 60 mmEZ-21570 6224 6320 70 mmEZ-21580 6224 6320 80 mmEZ-21590 6224 6320 90 mmEZ-215100 6224 6320 100 mmEZ-22560 - 6321 60 mmEZ-22570 - 6321 70 mmEZ-22580 - 6321 80 mmEZ-22590 - 6321 90 mmEZ-225100 - 6321 100 mmEZ-23060 6226 - 60 mmEZ-23070 6226 - 70 mmEZ-23080 6226 - 80 mmEZ-23090 6226 - 90 mmEZ-230100 6226 - 100 mmEZ-24070 - 6322 70 mmEZ-24080 - 6322 80 mmEZ-24090 - 6322 90 mmEZ-240100 - 6322 100 mmEZ-25070 6228 - 70 mmEZ-25080 6228 - 80 mmEZ-25090 6228 - 90 mmEZ-250100 6228 - 100 mmEZ-250110 6228 - 110 mmEZ-26070 - 6324 70 mmEZ-26080 - 6324 80 mmEZ-26090 - 6324 90 mmEZ-260100 - 6324 100 mmEZ-260110 - 6324 110 mmEZ-27070 6230 - 70 mmEZ-27080 6230 - 80 mmEZ-27090 6230 - 90 mmEZ-270100 6230 - 100 mmEZ-270110 6230 - 110 mmEZ-28080 - 6326 80 mmEZ-28090 - 6326 90 mmEZ-280100 - 6326 100 mmEZ-280110 - 6326 110 mmEZ-280120 - 6326 120 mmEZ-29080 6232 - 80 mmEZ-29090 6232 - 90 mmEZ-290100 6232 - 100 mmEZ-290110 6232 - 110 mmEZ-290120 6232 - 120 mmEZ-30080 - 6328 80 mmEZ-30090 - 6328 90 mmEZ-300100 - 6328 100 mmEZ-300110 - 6328 110 mmEZ-300120 - 6328 120 mmEZ-310120 6234 6424 120 mmEZ-320120 6236 6330 120 mmEZ-340120 6238 6332 120 mmEZ-360120 6240 6334 120 mmEZ-380120 - 6336 120 mmEZ-400120 6244 6338 120 mm

EZE-SLEEVE®

Cast Iron Bearing Housing Repair Sleeves

Advantages:

•Reduces machining time

•Increases productivity

•Excellent heat transfer

•Provides a superior finish

•Environmentally safe

•Class 40 gray iron

•In stock ready to ship

•Custom sizes available

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale. 27

Phone: 800.774.4643 • Fax: 800.768.9782

CAST IRON OVERSIZE EZE-SLEEVE®

Cast Iron Bearing Housing Repair Sleeves

Cast Approx. Approx.Iron Bearing Bearing Sleeve Sleeve OD Sleeve OD

Part No. No. No. Length ± .05 mm ± .002”

EZ-3020-5 6200 - 20 mm 34 mm 1.339EZ-3220-5 6201 - 20 mm 36 mm 1.418EZ-3520-5 6202 6300 20 mm 39 mm 1.536EZ-3720-5 - 6301 20 mm 41 mm 1.615EZ-4020-5 6203 - 20 mm 44 mm 1.733EZ-4220-5 - 6302 20 mm 46 mm 1.811EZ-4720-5 6204 6303 20 mm 51 mm 2.009EZ-5222-5 6205 6304 22 mm 56 mm 2.205EZ-6250-5 6206 6305 50 mm 66 mm 2.599EZ-7250-5 6207 6306 50 mm 77 mm 3.032EZ-8050-5 6208 6307 50 mm 85 mm 3.347EZ-8550-5 6209 - 50 mm 90 mm 3.544EZ-9050-5 6210 6308 50 mm 95 mm 3.741EZ-10050-5 6211 6309 50 mm 106 mm 4.174EZ-11060-5 6212 6310 60 mm 116 mm 4.568EZ-12070-5 6213 6311 70 mm 126 mm 4.961EZ-12570-5 6214 - 70 mm 131 mm 5.158EZ-13070-5 6215 6312 70 mm 137 mm 5.394EZ-14070-5 6216 6313 70 mm 147 mm 5.788EZ-15070-5 6217 6314 70 mm 157 mm 6.182EZ-16070-5 6218 6315 70 mm 167 mm 6.575EZ-17080-5 6219 6316 80 mm 177 mm 6.969EZ-18080-5 6220 6317 80 mm 187 mm 7.363EZ-19080-5 6221 6318 80 mm 197 mm 7.757EZ-20090-5 6222 6319 90 mm 208 mm 8.190EZ-21590-5 6224 6320 90 mm 223 mm 8.780EZ-225100-5 - 6321 100 mm 233 mm 9.174EZ-230100-5 6226 - 100 mm 238 mm 9.371EZ-240100-5 - 6322 100 mm 249 mm 9.804EZ-250110-5 6228 - 110 mm 259 mm 10.197EZ-260110-5 - 6324 110 mm 269 mm 10.591EZ-270110-5 6230 - 110 mm 279 mm 10.984EZ-280110-5 - 6326 120 mm 289 mm 11.378EZ-290120-5 6232 - 120 mm 299 mm 11.772EZ-300120-5 - 6328 120 mm 309 mm 12.165

NEW PRODUCT!

• Oversized Sleeves

• 0.040” OverStandard

• Very Simple toInstall

Advantages:









Phone: 800.774.4643 • Fax: 800.768.9782


IEZ-3020-9 6200 - 20 mmIEZ-3220-9 6201 - 20 mmIEZ-3520-9 6202 6300 20 mmIEZ-3720-9 - 6301 20 mmIEZ-4020-9 6203 - 20 mmIEZ-4220-9 - 6302 20 mmIEZ-4720-9 6204 6303 20 mmIEZ-5222-9 6205 6304 22 mmIEZ-6230-9 6206 6305 30 mmIEZ-6240-9 6206 6305 40 mmIEZ-6250-9 6206 6305 50 mmIEZ-7230-9 6207 6306 30 mmIEZ-7240-9 6207 6306 40 mmIEZ-7250-9 6207 6306 50 mmIEZ-8030-9 6208 6307 30 mmIEZ-8040-9 6208 6307 40 mmIEZ-8050-9 6208 6307 50 mmIEZ-8530-9 6209 - 30 mmIEZ-8540-9 6209 - 40 mmIEZ-8550-9 6209 - 50 mmIEZ-9030-9 6210 6308 30 mmIEZ-9040-9 6210 6308 40 mmIEZ-9050-9 6210 6308 50 mmIEZ-10030-9 6211 6309 30 mmIEZ-10040-9 6211 6309 40 mmIEZ-10050-9 6211 6309 50 mmIEZ-11030-9 6212 6310 30 mmIEZ-11040-9 6212 6310 40 mmIEZ-11050-9 6212 6310 50 mmIEZ-11060-9 6212 6310 60 mmIEZ-12040-9 6213 6311 40 mmIEZ-12050-9 6213 6311 50 mmIEZ-12060-9 6213 6311 60 mmIEZ-12070-9 6213 6311 70 mmIEZ-12540-9 6214 - 40 mmIEZ-12550-9 6214 - 50 mmIEZ-12560-9 6214 - 60 mmIEZ-12570-9 6214 - 70 mmIEZ-13040-9 6215 6312 40 mmIEZ-13050-9 6215 6312 50 mmIEZ-13060-9 6215 6312 60 mmIEZ-13070-9 6215 6312 70 mmIEZ-14040-9 6216 6313 40 mmIEZ-14050-9 6216 6313 50 mmIEZ-14060-9 6216 6313 60 mmIEZ-14070-9 6216 6313 70 mmIEZ-15040-9 6217 6314 40 mmIEZ-15050-9 6217 6314 50 mmIEZ-15060-9 6217 6314 60 mmIEZ-15070-9 6217 6314 70 mmIEZ-16040-9 6218 6315 40 mmIEZ-16050-9 6218 6315 50 mmIEZ-16060-9 6218 6315 60 mmIEZ-16070-9 6218 6315 70 mmIEZ-17050-9 6219 6316 50 mmIEZ-17060-9 6219 6316 60 mmIEZ-17070-9 6219 6316 70 mmIEZ-17080-9 6219 6316 80 mmIEZ-18050-9 6220 6317 50 mmIEZ-18060-9 6220 6317 60 mmIEZ-18070-9 6220 6317 70 mmIEZ-18080-9 6220 6317 80 mmIEZ-19050-9 6221 6318 50 mm


IEZ-19060-9 6221 6318 60 mmIEZ-19070-9 6221 6318 70 mmIEZ-19080-9 6221 6318 80 mmIEZ-20050-9 6222 6319 50 mmIEZ-20060-9 6222 6319 60 mmIEZ-20070-9 6222 6319 70 mmIEZ-20080-9 6222 6319 80 mmIEZ-20090-9 6222 6319 90 mmIEZ-21560-9 6224 6320 60 mmIEZ-21570-9 6224 6320 70 mmIEZ-21580-9 6224 6320 80 mmIEZ-21590-9 6224 6320 90 mmIEZ-215100-9 6224 6320 100 mmIEZ-22560-9 - 6321 60 mmIEZ-22570-9 - 6321 70 mmIEZ-22580-9 - 6321 80 mmIEZ-22590-9 - 6321 90 mmIEZ-225100-9 - 6321 100 mmIEZ-23060-9 6226 - 60 mmIEZ-23070-9 6226 - 70 mmIEZ-23080-9 6226 - 80 mmIEZ-23090-9 6226 - 90 mmIEZ-230100-9 6226 - 100 mmIEZ-24070-9 - 6322 70 mmIEZ-24080-9 - 6322 80 mmIEZ-24090-9 - 6322 90 mmIEZ-240100-9 - 6322 100 mmIEZ-25070-9 6228 - 70 mmIEZ-25080-9 6228 - 80 mmIEZ-25090-9 6228 - 90 mmIEZ-250100-9 6228 - 100 mmIEZ-250110-9 6228 - 110 mmIEZ-26070-9 - 6324 70 mmIEZ-26080-9 - 6324 80 mmIEZ-26090-9 - 6324 90 mmIEZ-260100-9 - 6324 100 mmIEZ-260110-9 - 6324 110 mmIEZ-27070-9 6230 - 70 mmIEZ-27080-9 6230 - 80 mmIEZ-27090-9 6230 - 90 mmIEZ-270100-9 6230 - 100 mmIEZ-270110-9 6230 - 110 mmIEZ-28080-9 - 6326 80 mmIEZ-28090-9 - 6326 90 mmIEZ-280100-9 - 6326 100 mmIEZ-280110-9 - 6326 110 mmIEZ-280120-9 - 6326 120 mmIEZ-29080-9 6232 - 80 mmIEZ-29090-9 6232 - 90 mmIEZ-290100-9 6232 - 100 mmIEZ-290110-9 6232 - 110 mmIEZ-290120-9 6232 - 120 mmIEZ-30080-9 - 6328 80 mmIEZ-30090-9 - 6328 90 mmIEZ-300100-9 - 6328 100 mmIEZ-300110-9 - 6328 110 mmIEZ-300120-9 - 6328 120 mmIEZ-310120-9 6234 6424 120 mmIEZ-320120-9 6236 6330 120 mmIEZ-340120-9 6238 6332 120 mmIEZ-360120-9 6240 6334 120 mmIEZ-380120-9 - 6336 120 mmIEZ-400120-9 6244 6338 120 mm

INSULATED IEZE-SLEEVE®

Cast Iron Bearing Housing Insulated Repair Sleeves

Advantages:








Call for delivery.


Phone: 800.774.4643 • Fax: 800.768.9782

EZE-SLEEVE® STEEL SHAFT REPAIR SLEEVES

EZS-1000-2 00 8 mm 25 mmEZS-1000-3 00 7 mm 25 mmEZS-1201-2 01 10 mm 25 mmEZS-1201-3 01 9 mm 25 mmEZS-1502-2 02 13 mm 25 mmEZS-1502-3 02 12 mm 25 mmEZS-1603-2 03 14 mm 25 mmEZS-1603-3 03 13 mm 25 mmEZS-1703-2 03 15 mm 25 mmEZS-1703-3 03 14 mm 25 mmEZS-2004-2 04 18 mm 50 mmEZS-2004-3 04 17 mm 50 mmEZS-2505-2 05 23 mm 50 mmEZS-2505-3 05 22 mm 50 mmEZS-3006-2 06 28 mm 50 mmEZS-3006-3 06 27 mm 50 mmEZS-3507-2 07 33 mm 50 mmEZS-3507-3 07 32 mm 50 mmEZS-4008-2 08 38 mm 50 mmEZS-4008-3 08 37 mm 50 mmEZS-4509-2 09 43 mm 50 mmEZS-4509-3 09 42 mm 50 mmEZS-5010-2 10 48 mm 50 mmEZS-5010-3 10 47 mm 50 mmEZS-5010-4 10 46 mm 50 mmEZS-5511-2 11 53 mm 50 mmEZS-5511-3 11 52 mm 50 mmEZS-5511-4 11 51 mm 50 mmEZS-6012-2 12 58 mm 50 mmEZS-6012-3 12 57 mm 50 mmEZS-6012-4 12 56 mm 50 mmEZS-6513-2 13 63 mm 50 mmEZS-6513-3 13 62 mm 50 mmEZS-6513-4 13 61 mm 50 mmEZS-7014-2 14 68 mm 75 mmEZS-7014-3 14 67 mm 75 mmEZS-7014-4 14 66 mm 75 mmEZS-7415-2 15 73 mm 75 mm

EZS-7415-3 15 72 mm 75 mmEZS-7415-4 15 71 mm 75 mmEZS-8016-2 16 78 mm 75 mmEZS-8016-3 16 77 mm 75 mmEZS-8016-4 16 76 mm 75 mmEZS-8517-2 17 83 mm 75 mmEZS-8517-3 17 82 mm 75 mmEZS-8517-4 17 81 mm 75 mmEZS-9018-2 18 88 mm 75 mmEZS-9018-3 18 87 mm 75 mmEZS-9018-4 18 86 mm 75 mmEZS-9519-2 19 93 mm 75 mmEZS-9519-3 19 92 mm 75 mmEZS-9519-4 19 91 mm 75 mmEZS-10020-2 20 98 mm 75 mmEZS-10020-3 20 97 mm 75 mmEZS-10020-4 20 96 mm 75 mmEZS-10521-2 21 103 mm 75 mmEZS-10521-3 21 102 mm 75 mmEZS-10521-4 21 101 mm 75 mmEZS-11022-2 22 108 mm 75 mmEZS-11022-3 22 107 mm 75 mmEZS-11021-4 22 106 mm 75 mmEZS-12024-2 24 118 mm 75 mmEZS-12024-3 24 117 mm 75 mmEZS-12024-4 24 116 mm 75 mmEZS-13026-2 26 128 mm 75 mmEZS-13026-3 26 127 mm 75 mmEZS-13026-4 26 126 mm 75 mmEZS-14028-2 28 138 mm 100 mmEZS-14028-3 28 137 mm 100 mmEZS-14028-4 28 136 mm 100 mmEZS-15030-2 30 148 mm 100 mmEZS-15030-3 30 147 mm 100 mmEZS-15030-4 30 146 mm 100 mmEZS-16032-2 32 158 mm 100 mmEZS-16032-3 32 157 mm 100 mmEZS-16032-4 32 156 mm 100 mm

Part Bearing Sleeve SleeveNo. No. Bore Length

Part Bearing Sleeve SleeveNo. No. Bore Length

Advantages:

• Improve turnaroundtime

• Precision bored oninside

• Excellent resistanceagainst normal stressexerted on bearing surface

• No stress or porosityinduced on shaft due towelding

• Environmentally safe

•SAE 1020 steel


Installation procedures can be provided. Contact your Essex Brownell sales representative.


Phone: 800.774.4643 • Fax: 800.768.9782

TOLERANCE RINGSTolerance rings are a quick and easy method of rebuilding bearing housings. Simply determinethe bearing series or width and O.D. of the bearing and select the tolerance ring. Check the maximum radial load rating. Keep in mind, over-hung loads as in a belt drive application canincrease radial load by as much as 30%. Bore the housing the recommended bore. Install the tolerance ring in the housing and assembly as usual. To avoid damage to the bearing or tolerancering, the housing must be kept square with the shaft at all times.

Recommended MaximumPart# Bearing Size Bearing OD Bearing Width Housing Bore Radial Load

(inches) (inches) (inches) (lbs.)

TR6200 200 1.811 .3543 1.259/1.257 980TR6201 201 1.2598 .3937 1.338/1.336 670TR6202 202 / 300 1.3780 .4331 1.456/1.454 820TR6301 301 1.4567 .4724 1.5347/1.5327 940TR6203 203 1.5748 .4724 1.653/1.651 1000TR6302 302 1.6535 .5118 1.731/1.729 1200TR6204 204 / 303 1.8504 .5512 1.928/1.926 1400TR6205 205 / 304 2.0472 .5906 2.145/2.143 1600TR6206 206 / 305 2.4409 .6299 2.538/2.536 2000TR6207 207 2.8346 .6693 2.9129/2.9119 2900TR6306 306 2.8346 .7480 2.9129/2.9119 3200TR6208 208 3.1496 .7087 3.2279/3.2269 3200TR6307 307 3.1496 .8226 3.2279/3.2269 3700TR6209 209 3.3465 .7480 3.4248/3.4238 3800TR6210 210 3.5433 .7874 3.6216/3.6206 4200TR6308 308 3.5433 .9055 3.6216/3.6206 4600TR6211 211 3.9370 .8268 4.0540/4.0520 4500TR6309 309 3.9370 .9843 4.0153/4.0143 4900TR6212 212 4.3307 .8661 4.4090/4.4080 5600TR6310 310 4.3307 1.0630 4.4090/4.4080 6400TR6213 213 4.7244 .9055 4.8027/4.8017 5200TR6311 311 4.7244 1.1417 4.8027/4.8017 7000TR6214 214 4.9213 .9449 4.9996/4.9986 6400TR6215 215 5.1181 .9843 5.1964/5.1954 7600TR6312 312 5.1181 1.2205 5.1964/5.1954 9400TR6216 216 5.5118 1.0236 5.5901/5.5891 8200TR6313 313 5.5118 1.2992 5.5901/5.5891 10800TR6217 217 5.9055 1.1024 5.9838/5.9828 8600TR6314 314 5.9055 1.3780 5.9838/5.9828 11600TR6218 218 6.2992 1.1811 6.3775/6.3765 9300TR6315 315 6.2992 1.4567 6.3755/6.3765 12300TR6316 316 6.6929 1.5354 6.7712/6.7702 15500TR6317 317 7.0866 1.6142 7.1649/7.1639 16400TR6318 318 7.4803 1.6929 7.5586/7.5576 17300

300 Series Bearings are slightly wider. Not intended for use on vertical shaft motors. Radial load capacity isgenerally equivalent to that specified for the bearing.


Phone: 800.774.4643 • Fax: 800.768.9782

WAVY SPRING WASHERSUsed to eliminate endplay in electric motors, and preload the bearings to reduce the possibility of bearing damage due to vibration and repetitive andnon-repetitive runout.

Bearing Bearing O.D. I.D. PreloadO.D.--MM Series A (IN.) C (IN.) Style In LB. Part #

10 R2 0.367 0.265 A 2 To 4 BSW-213 R2A, R3 0.492 0.35 A 3 To 5 BSW-316 634 0.595 0.312 C 3 To 1 BRW-110016 634, R4 0.618 0.44 A 3 To 5 BSW-419 635, 636 0.728 0.344 C 4 To 8 BRW-110819 635, 636, R4 0.734 0.531 A 4 To 7 BSW-522 627, 608 0.846 0.453 C 3 To 7 BRW-110422 627, 608, R6 0.855 0.65 A 4 To 7 BSW-626 629, 6000 1.004 0.516 C 5 To 9 BRW-111630 6200 1.164 0.688 C 9 To 13 BRW-112030 6200 1.181 1.048 B 19 BSW-3032 6002, 6201 1.24 0.688 C 10 To 14 BRW-112432 6002, 6201 1.26 1.127 B 20 BSW-3235 6003, 6202, 6300 1.36 0.814 C 11 To 15 BRW-112835 6003, 6202, 6300 1.378 1.245 B 22 BSW-3537 6004, 6301 1.457 1.314 B 23 BSW-3740 6203 1.555 0.971 C 15 To 21 BRW-113240 6203 1.555 1 C 31 To 39 BRW-113640 6203 1.575 1.432 B 25 BSW-4042 6004, 6302 1.654 1.511 B 26 BSW-4247 6005, 6204, 6303 1.83 1.189 C 17 To 23 BRW-114047 6005, 6204, 6303 1.85 1.707 B 29 BSW-4752 6205, 6304 2.047 1.897 B 32 BSW-5262 6008, 6206, 6305 2.441 2.263 B 38 BSW-6272 6207, 6306 2.835 2.646 B 44 BSW-7280 6010, 6208, 6307 3.15 2.961 B 49 BSW-8085 6209 3.346 3.113 B 52 BSW-8590 6011, 6210, 6308 3.543 3.31 B 56 BSW-90100 6013, 6211, 6309 3.937 3.704 B 62 BSW-100110 6014, 6212, 6310 4.331 4.098 B 68 BSW-110120 6213, 6311 4.724 4.491 B 74 BSW-120125 6214 4.921 4.688 B 77 BSW-125130 6017, 6215, 6312 5.118 4.885 B 80 BSW-130140 6018, 6216, 6313 5.512 5.279 B 86 BSW-140150 6217, 6314 5.906 5.672 B 91 BSW-150160 6218, 6315 6.299 6.066 B 99 BSW-160170 6219, 6316 6.693 6.46 B 105 BSW-170180 6220, 6317 7.087 6.711 B 111 BSW-180190 6221, 6318 7.48 7.105 B 117 BSW-190200 6222, 6319 7.874 7.499 B 123 BSW-200215 6224, 6320 8.465 8.089 B 133 BSW-215

Note: Other sizes available. Call for availability.

Style AStamped steel wavy springwashers, stamped fromsheets of spring steel thenformed to create wavydesign. Spring rate is linealfrom 20% to 80% as springwasher is compressed. Madefrom high carbon steel.

Style BSplit edge formed wavyspring washers. Producedfrom edge winding flat wireresulting in a circular graindesign that reduces thechance of breakage commonwith stamped spring design.Split ring design produces aconstant and even springrate through-out deflection.Made from carbon steel.

Style C3 finger spring steel washerscounteract noise, excesswear, endplay and vibration,especially at high speeds.They promote efficiency andsmooth operation, reducingskidding wear on rotatingparts. Made from high carbonsteel.

Wavy spring washers aresupplied in three styles:


Phone: 800.774.4643 • Fax: 800.768.9782

LOCK NUTS / LOCK WASHERSBearing lock nuts and lock washers are used to hold bearings in place, and keep them there.Common applications are spherical roller bearings and angular contact bearings in verticalhollow shaft motors.

BEARING LOCK NUTS

Threads

Major No. Per OutsidePart# Dia. d Min In. K1 Dia. C Max.

BLN-N0 0.391 32 0.755BLN-N1 0.469 32 0.880BLN-N2 0.586 32 1.005BLN-N3 0.664 32 1.130BLN-N4 0.781 32 1.380BLN-N5 0.969 32 1.568BLN-N6 1.173 18 1.755BLN-N7 1.376 18 2.068BLN-N8 1.563 18 2.255BLN-N9 1.767 18 2.536BLN-N10 1.967 18 2.693BLN-N11 2.157 18 2.974BLN-N12 2.360 18 3.161BLN-N13 2.548 18 3.380BLN-N14 2.751 18 3.630BLN-AN15 2.933 12 3.880BLN-AN16 3.137 12 4.161BLN-AN17 3.340 12 4.411BLN-AN18 3.527 12 4.661BLN-AN19 3.730 12 4.943BLN-AN20 3.918 12 5.193BLN-AN21 4.122 12 5.443BLN-AN22 4.325 12 5.724BLN-AN24 4.716 12 6.130BLN-AN26 5.106 12 6.755BLN-AN28 5.497 12 7.099BLN-AN30 5.888 12 7.693BLN-AN32 6.284 8 8.068BLN-AN34 6.659 8 8.661BLN-AN36 7.066 8 9.068BLN-AN38 7.472 8 9.474BLN-AN40 7.847 8 9.849

BEARING LOCK WASHERS

Part# No. of Tangs

BLW-W0 9BLW-W1 9BLW-W2 11BLW-W3 11BLW-W4 11BLW-W5 13BLW-W6 13BLW-W7 15BLW-W8 15BLW-W9 17BLW-W10 17BLW-W11 17BLW-W12 17BLW-W13 19BLW-W14 19BLW-W15 19BLW-W16 19BLW-W17 19BLW-W18 19BLW-W19 19BLW-W20 19BLW-W21 19BLW-W22 19BLW-W24 19BLW-W26 19BLW-W28 19BLW-W30 19BLW-W32 19BLW-W34 19BLW-W36 19BLW-W38 19BLW-W40 19

LOCK WASHER

LOCK WASHER

THREAD LOCKING – Anaerobics

Adhesive Systems Torque 21 TL - Low strength threadlocking, Ideal for small screws 1/4" and smaller. Controlled lubricity for accurate clamp loading. Easy disassembly. MIL-S-46163A, Type II, Grade M.Loctite # Color Viscosity Set Time Full Cure Torque Temp. Range

222 Purple 1200 10 min 8hr 75/50 -60 to 350°F10 ML ASI-22TL-10MIL 50 ML ASI-22TL-50MIL

Adhesive Systems Torque 42 TL - General Purpose, medium strength, removable. Ideal for fasteners 3/4" or smaller. Controlled lubricity, for accurate clamp loading. Mil-S-46163A, Type II, Grade NLoctite # Color Viscosity Set Time Full Cure Torque Temp. Range

242 Blue 1200 10 mil 8 hr 150/75 -60 to 350°F10 ML ASI-42TL-10MIL 50 ML ASI-42TL-50MIL

Adhesive Systems Torque 71 TL - High Strength, permanent threadlocking. Ideal for fasternrs up to 1". MIL-S-46163, Type I, Grade KLoctite # Color Viscosity Set Time Full Cure Torque Temp. Range

271 Red 500 10 mil 8 hr 250/350 -60 to 350°F10 ML ASI-71TL-10MIL 50 ML ASI-71TL-50MIL

Adhesive Systems Torque 77 TL - High Strength, permanent threadlocking. Higher viscosity fordiameter over 1". MIL-S-46163A, Type II, Grade L.Loctite # Color Viscosity Set Time Full Cure Torque Temp. Range

277 Red 7000 10 min 8 hr 275/375 -60 to 350°F10 ML ASI-77TL-10MIL 50 ML ASI-77TL-50MIL

Adhesive Systems Torque 90 TL - High strength, wicking grade. Ideal for post application to pre-assembled fasteners. Penetrates threads by capillary action. Secures screws, bolts, seals welds,porous metal parts. Mil-S-46163A, Type III, Grade RLoctite # Color Viscosity Set Time Full Cure Torque Temp. Range

290 Green 12 10 mil 8 hr 150/275 -60 to 350°F10 ML ASI-90TL-10MIL 50 ML ASI-90TL-50MIL

RETAINING COMPOUNDS – Anaerobics

Adhesive Systems Torque 09 RC - General Purpose, low viscosity retaining compound. Fixtures inunder 10 minutes, providing shear strength up to 3,800 psi, works well on similar and dissimilarmetals. Tempreature resistance to 350 deg. Mil-R-46082B, Type I.Loctite # Color Viscosity Gap Fill Set Time Full Cure Torque Temp. Range

609 Green 125 0.005 15 min 8 hr 3800 psi -65 to 350°F10 ML ASI-09RC-10MIL 50 ML ASI-09RC-50MIL

Adhesive Systems Torque 80 RC - High Strength for slip fitted parts. 4,200 psi. Fixtures in underfive minutes with gap filling up to .015.Loctite # Color Viscosity Set Time Full Cure Torque Temp. Range

680 Green 1400 0.015 5 min 8 hrs 4200 psi -65 to 350°F10 ML ASI-80RC-10MIL 50 ML ASI-80RC-50MIL

Adhesive Systems Torque 20 RC - High Strength, high temperature retaining compound. Shearstrength up to 4,000 psi, radial clearance up to .015”. Fixtures in under 15 min.Loctite # Color Viscosity Set Time Full Cure Torque Temp. Range

620 Green 8500 0.015 5 min 8 hrs 4000 psi -65 to 450°F10 ML ASI-20RC-10MIL 50 ML ASI-20RC-50MIL


Phone: 800.774.4643 • Fax: 800.768.9782

SNAP RINGSAvaiable in Beryllium Copper only.

Ring Size

Shaft Diameter Free Diameter Thickness

Precision Part # Decimal Fraction D Tolerance Thickness Tolerance

ESR-5100-050 .500 1/2 .461 +.002 / -.005 .035 +/-.002ESR-5100-062 .625 5/8 .579 +.005 / -.010 .035 +/-.002ESR-5100-075 .750 3/4 .693 +.005 / -.010 .042 +/-.002ESR-5100-081 .812 13/16 .751 +.005 / -.010 .042 +/-.002ESR-5100-087 .875 7/8 .810 +.005 / -.010 .042 +/-.002ESR-5100-100 1.000 1 .925 +.005 / -.010 .042 +/-.002ESR-5100-112 1.125 1-1/8 1.041 +.010 / -.015 .050 +/-.002ESR-5100-118 1.188 1-3/16 1.098 +.010 / -.015 .050 +/-.002ESR-5100-137 1.375 1-3/8 1.272 +.010 / -.015 .050 +/-.002ESR-5100-156 1.562 1-9/16 1.446 +.013 / -.025 .062 +/-.003ESR-5100-162 1.625 1-5/8 1.503 +.013 / -.025 .062 +/-.003ESR-5100-177 1.772 1.637 +.013 / -.025 .062 +/-.003ESR-5100-187 1.875 1-7/8 1.735 +.013 / -.025 .062 +/-.003ESR-5100-200 2.000 2 1.850 +.013 / -.025 .062 +/-.003ESR-5100-212 2.125 2-1/8 1.964 +.015 / -.025 .078 +/-.003ESR-5100-237 2.375 2-3/8 2.197 +.015 / -.025 .078 +/-.003ESR-5100-255 2.559 2.377 +.020 / -.030 .078 +/-.003ESR-5100-275 2.750 2-3/4 2.543 +.020 / -.030 .093 +/-.003ESR-5100-287 2.875 2-7/8 2.659 +.020 / -.030 .093 +/-.003ESR-5100-315 3.156 3-5/32 2.920 +.020 / -.030 .093 +/-.003ESR-5100-334 3.346 3-11/32 3.092 +.020 / -.030 .093 +/-.003ESR-5100-354 3.543 3.277 +.020 / -.030 .109 +/-.003ESR-5100-375 3.750 3-3/4 3.468 +.020 / -.030 .109 +/-.003ESR-5100-393 3.938 3-15/16 3.642 +.020 / -.030 .109 +/-.003ESR-5100-475 4.750 4-3/4 4.458 +.020 / -.030 .109 +/-.003ESR-5100-700 7.00 7 6.570 +.050 / -.130 .156 +/- .005


Phone: 800.774.4643 • Fax: 800.768.9782

Crossover ChartAnderton N1400IRR 3100Rotor Clip SHMilitary 16624

SHAFT GROUNDING BRUSHESA Leading Cause of Bearing Fatigue & FailureHelwig's Shaft Grounding Assembly is your effective, inexpensive safeguard against shaft currents -- a common damaging problem in DC motors, particularly those with static SCR drives.

Static and induced currents in DC motor shafts usually seek a path to ground through the motorbearing. Over time, electrical pits can develop on bearing components. These pits can eventuallyproduce deep, well-defined flutes on inner and outer races and balls or rollers. The result? Noise,vibration and premature bearing failure. Any motor, large or small, is susceptible.

Shunts Shaft Currents Safely to GroundInstalled on a motor’s drive and bearings, Helwig’s Shaft Grounding Assembly effectively shuntsstatic and induced shaft currents away from the bearing to minimize the potential for problems.

The Assembly’s constant-force spring ensures proper electrical contact between groundingbrush and motor shaft at all times for continuous bearing protection. And the silver graphitegrounding brush maintains the lowest contact drop, so shaft voltages stay at safe minimum levelsnear zero.

Fast, Easy Brush Changes Cut Maintenance Time Changing grounding brushes is quick and simple with the Helwig Shaft Grounding Assembly.There's no fumbling with awkward coil springs and Screw-on caps. To replace a brush, simplysqueeze the spring clip assembly, lift it up and tilt it back. Remove the old brush and insert a newone. Slide the spring clip back down until it snaps in place, and you're done.

Designed for Direct Replacement of Existing Assemblies Helwig's Shaft Grounding Assembly replaces General Electric and other types of groundingbrushes and holders currently used. And it's an essential replacement offering a lower voltagedrop over makeshift “solutions” such as grounding straps and braids. Safeguard your motor bearings against shaft current damage. Install the proven, positive protection of Helwig ShaftGrounding Assemblies today.

Assembly Part Number: SGA-1Replacement Brush Part Number: 10-372571

Electric ArcingElectric arcing is material melted locally to form fluting or groove like corrugations

CausesElectrical current passes through the bearing and sparks generated melt the raceway.

Couter MeasuresEliminate the flow of electric current through the bearing by grounding or insulating.


Phone: 800.774.4643 • Fax: 800.768.9782

Electical arcing on inner ringraceway of a single rowdeep groove ball bearing

Electrical arcing on outerringer raceway of a single

row deep groove ball bearing

TIP-SENSITIVE RTD’S• Copper alloy tip for fast response • Accurate sensing to 260°C (500°F)• Non armor models can be user-shortenedThe sensing tip of these probes is constructed of copper alloy, twenty times more conductive thanstainless steel. Sensors react more quickly to changes and indicate tip temperature instead ofstem temperature. The result: Better accuracy in thermowells, bearings, and other installations.0.250" diameter is recommended for use in thermowells.

SpecificationsTemperature range: -50 to 260°C (-58 to 500°F).Case: Stainless steel with copper alloy tip.Minimum case length: Single element probes: 2.8" (71.1 mm).Dual element probes: 4.0" (101.6 mm).Maximum case length: 48" (1220 mm), longer on special order.Leads: 2, 3, or 4 leadwires, stranded copper with PTFE insulation. AWG 22, except 0.188" diameterdual probes AWG 24. For 2-lead RTDs add 0.03 per foot (0.05 Ω per foot for 0.188" diameter dualprobes) of combined case and lead length to element tolerance. Copper (CA, CC) models musthave 3 leads.Time constant: 2.0 seconds typical in moving water. 3.0 seconds for dual element models.Pressure rating: 100 psi (6.9 bar).Insulation resistance: Single element probes: 1000 megohms min. at 500 VDC, leads to case.Dual element probes: 100 megohms min. at 100 VDC, between elements and leads to case.Vibration: Withstands 10 to 2000 Hz at 20 G’s min. per MIL-STD-202, Method 204, Test Condition D.Shock: Withstands 100 G’s min. sine wave shock of 8 milliseconds duration.

TCR Model number for probe diameter:Element Ω/Ω/°C 0.188" 0.215" 0.250"

(4.8 mm) (5.5 mm) (6.4 mm)

Single element RTDs: No armor over leadsPlatinum, 100 ±0.5% at 0°C 0.00392 S54PA S51PA S53PAPlatinum, 100 ±0.1% at 0°C 0.00385 S854PD S851PD S853PD

(meets EN60751, Class B)Platinum, 100 ±0.5% at 0°C 0.00385 S884PE S881PE S883PECopper, 10 ±0.2% at 25°C 0.00427 S54CA S51CA S53CANickel, 120 ±0.5% at 0°C 0.00672 S54NA S51NA S53NA

Single element RTDs with armor over leadsAdd element code (Ex: S154NA, S153CA) S154__ S151__ S153__

Dual element RTDs: No armor over leadsPlatinum, 100 ±0.5% at 0°C 0.00392 S59PA S56PA S57PAPlatinum, 100 ±0.1% at 0°C 0.00385 S859PD S856PD S857PD

(meets EN60751, Class B)Platinum, 100 ±0.5% at 0°C 0.00385 S889PE S886PE S887PECopper, 10 ±0.5% at 25°C 0.00427 N/A S56CC S57CCNickel, 120 ±0.5% at 0°C 0.00672 S59NA S56NA S57NA

Dual element RTDs with armor over leadsAdd element code (Ex: S159NA, S157CC) S159__ S156__ S157__


Phone: 800.774.4643 • Fax: 800.768.9782

Case Length

Case Length

Lead LengthArmor Option

Lead Length

4” (102 mm)

Copper Alloy TipSleeve

MOTOR SHAFT FLINGERSInexpensive rubber flingers fit snug on the shaft of electric motors to prevent water from creepingup the shaft into the housing damaging bearings and other components of the motor.

"A" "B" "C" Photo PartInside Dia. Shoulder Dia. Outside Dia. Ref. Number

(IN.) (IN.) (IN.)

1/2 1-1/4 2-1/4 1 TER-45/8 1-1/4 2-1/4 1 TER-53/4 1-1/4 2-1/4 1 TER-67/8 1-1/4 2 2 TER-77/8 1-3/8 2 1 ER-7

1-1/8 1-1/2 2-7/16 2 TER-91-1/8 1-5/8 2-7/16 1 ER-91-1/4 1-5/8 3 2 TER-111-1/4 1-7/8 3 1 ER-111-5/8 2-1/8 3-3/16 2 TER-131-5/8 2-1/8 3-1/8 1 ER-131-7/8 2-1/4 3-1/8 2 TER-151-7/8 2-1/4 3-1/8 1 ER-152-1/8 2-1/2 3-1/4 2 TER-172-1/8 2-5/8 3-1/4 1 ER-172-3/8 2-3/4 3-1/2 2 TER-192-3/8 2-3/4 4-3/8 1 ER-192-7/8 3-3/8 4-1/8 2 TER-232-7/8 3-1/4 5-3/8 1 ER-233-3/8 3-7/8 4-3/4 2 TER-273-3/8 3-3/4 5-5/8 1 ER-27


Phone: 800.774.4643 • Fax: 800.768.9782

DOW CORNING INDUSTRIAL LUBRICANTSMOLYKOTE Bearing Greases From Dow Corning

G-0010 Bearing Grease PolyureaProvides excellent corrosion resistance. Temp Range -20 to 340°F

G-0101 Long Life Bearing Grease Lithium complexHigh speed bearing applications. Temp Range -5 to 300°F

BR-2 Plus Multi-Purpose EP Grease Lithium soap, mineral oil with MoS2High load, extreme pressure, moderate speed applications. Temp Range -20 to 265°F

BG-20 High Performance Synthetic Bearing Grease Lithium complex, polyesterHigh speed, high temp., and high loads. Temp Range -50 to 360°F

G-4500 Multi-Purpose Synthetic Grease Synthetic NLGI#2Higher speeds, moderate loads. Application with possible incidental food contact. FDA 21 CFR 178.3570 Temp Range -60 to 325°F

33 Extreme Low Temperature Bearing Grease Lithium soap, SiliconeLight load instrument lubricant. Temp Range -100 to 400°F

44 High Temperature Bearing Grease Lithium soap, SiliconeLight to moderate loads. Temp Range -40 to 400°F

41 Extreme High Temperature Bearing Grease Carbon Black thickened SiliconeModerate loads and speeds. Temp Range 0 to 550°F


Phone: 800.774.4643 • Fax: 800.768.9782


Phone: 800.774.4643 • Fax: 800.768.9782

DOW CORNING INDUSTRIAL LUBRICANTSIndustrial Lubricants From Dow Corning

G-n Metal Assembly Paste/Spray – Reduces friction and wear on parts during assembly and break-in.Breaking-in bearings, splines, gears, chains, threaded connections, press fitting.

321 Dry Film Lubricant – Long-term dry lubrication where air drying formulation is desired.Lubricating gears, cutting tools, gear cutters, taps, drills, suited for dusty environments.

557 Silicone Dry Film Lubricant – Lubrication of sliding contacts, particularly aluminum and stainless steel.Lubricating slitters, blades, tool and dies, taps and drills, slides, conveyors, tracks, handling equipment.

L-0501 High-Performance Penetrating Oil and LubricantLoosens rusted parts, inhibits corrosion and oxidation while providing long-term lubrication. NO Kerosene!

Metal Protective Coating – Long-term corrosion protection.Protecting machined parts, stampings, raw stock, finished products, fixtures, tools, stored parts.

P-37 UltraPure High Temperature Paste – Ultrapure paste for use on threaded connections.Prevents seizure and damage of threads during assembly and disassembly after exposure to extreme high heat.

M-77 Part Assembly Paste – Part assembly, running in, press-fitting, lubricants for high temperatures.Lubricating during running-in of gears, splines, journal bearing. Reduces torque in tightening threads.

1000 High Temperature Anti-Seize Paste – Multi-purpose paste for threaded connections.Lubricating threaded connectors exposed to severe environments. Rollers, oven chains, hinges.


Phone: 800.774.4643 • Fax: 800.768.9782

NOTES


Phone: 800.774.4643 • Fax: 800.768.9782

BEARING TOOLS

PORTABLE HYDRAULIC PULLEY PULLER..................................................................................42

POSI LOCK™ PULLERS ..............................................................................................................43

BALL BEARING INSTALLER KIT..................................................................................................44

BALL BEARING PULLER ADAPTERS..........................................................................................44

STANLEY COMPO-CAST® HAMMERS........................................................................................44

BEARING HEATERS......................................................................................................................45

DAKE ARBOR PRESSES ........................................................................................................46-48

IRD 206 VIBRATION METER ........................................................................................................49

ACCUSHIM SHAFT HOG PRECISION LASER ALIGNMENT SYSTEM ....................................50

PORTABLE HYDRAULIC PULLEY PULLERPortable and easy to operate, it quickly removes practically any object froma shaft. Sturdily constructed yet reasonably priced, it has added safety features like remote control and Quicklink Chain Attachment. Pressure issupplied to the hydraulic ram by either an easily operated hand pump or anelectrically operated pump. Three simple adjustments set the puller to thedimensions required. The beam, arms, ram and pump can be removed fromthe puller stand for overhead or other special uses. Eliminates the need forcrow bars, wedges, torches, etc.

SPECIFICATIONS

MAXIMUM MAXIMUM DIMENSIONS SHIPPULLER DIAMETER (IN.) FACE (IN.) H(IN.) W(IN.) L(IN.) WEIGHT

8 Ton 22 24 40 26 36 140 lbs.20 Ton 32 36 42 34 48 460 lbs.60 Ton 42 48 48 46 60 820 lbs.100 Ton 48 48 48 46 60 1060 lbs.

MODELS

Part No. THP-8H 8 Ton Manual Hydraulic Puller complete with Quicklink Chain Attachment.

Part No. THP-20H 20 Ton Manual Hydraulic Puller with Quicklink Chain Attachment and set of RamAdapters.

Part No. THP-60H 60 Ton Manual Hydraulic Puller with Quicklink Chain Attachment and set of RamAdapters.

Part No. THP-2OHEP 20 Ton Hydraulic Puller with Electric Pump, with Quicklink Chain Attachmentand set of Ram Adapters.

Part No. THP-6OHEP 60 Ton Hydraulic Puller with Electric Pump, with Quicklink Chain Attachmentand set of Ram Adapters.

Part No. THP-1OOHEP 100 Ton Hydraulic Puller with Electric Pump, with Quicklink ChainAttachment and set of Ram Adapters.ACCESSORIES

Part No. THP-8Q Quicklink Chain for 8 ton model. 6' of 3/8" chain.

Part No. THP-20Q Quicklink Chain for 20 ton models. 8' of 3/8" chain.

Part No. THP-60Q Quicklink Chain for 60 ton models. 10' of 1/2" chain.

Part No. THP-2OEPK 20 Ton Electric Pump Kit. *

Part No. THP-6OEPK 60 Ton Electric Pump Kit. *

Part No. THP-RA-20 Set of 10 Adapters for 20 ton models.



*The electric pump is wired for 115V/10/60 Hz. This pump is available in easy-to-install kit form foradaptation to all 20, 50 and 60 ton pullers manufactured since 1945.

FOB DAVENPORT, IOWA


Phone: 800.774.4643 • Fax: 800.768.9782


Phone: 800.774.4643 • Fax: 800.768.9782

POSI LOCK™ PULLERSThe POSI LOCK™ patented cage design is simply the easiest and safest way to use a bearingPuller! The POSI LOCK™ line of quality manual gear and bearing pullers utilize a T-handle andCage® to control the jaws at all times. This means that the opening and closing, locking and aligning of the jaws is all done automatically by simply turning the T-handle.

This style Puller can replace several other pullers required for special applications. Ask for ademonstration and discover the advantage the cage gives you! Long Arm Sets provide the abilityto increase the reach & spread of your pullers to provide even more flexibility. Arms are easilyinterchangeable because ball lock pins are used to hold the arm in place.

ADVANTAGES

1. Roll center bolt threads are designed for less effort when applying high torque.

2. Heat-treated tips.

3. T-handle locks jaws precisely where you set them.

4. Slim tapered jaws allow for better gripping and easier access in tight spots.

5. Safety Cage® guides jaws for fast set-up, solid contact and superior safety.

6. Nut recessed to avoid mushrooming and disfiguring from impact.

7. Leverage up front for positive grip, vise-like power and no slippage.

8. Tip protectors and optional bolt extenders create a live center to fit on the center bolt for additional protection and added reach.

Pullers

Rating Reach Spread # of(In.) (In.) Arms Part Number

2 Ton 4 1/2 - 5 2 TPP-2045 Ton 4 1/2 - 5 3 TPP-1046 Ton 6 1/2 - 7 2 TPP-20610 Ton 6 1/2 - 7 3 TPP-10612 Ton 8 3/4 - 12 2 TPP-20814 Ton 10 1 - 15 2 TPP-21017 Ton 8 3/4 - 12 3 TPP-10820 Ton 10 1 - 15 3 TPP-11025 Ton 12 2-1/2 - 18 2 TPP-21330 Ton 12 2-1/2 - 18 3 TPP-11335 Ton 14 3 - 25 2 TPP-21640 Ton 14 3 - 25 3 TPP-116

Long Arm Sets

Puller Reach SpreadModel (In.) (In.) Part Number

TPP-108 9-11/16” 2-1/4 - 15 TPP-L0TPP-208 9-11/16 2-1/4 - 15 TPP-L2TPP-110 15-3/4 1.5 - 22 TPP-L4TPP-210 15-3/4 1.5 - 22 TPP-L6TPP-113 20 1.5 - 30 TPP-L8TPP-213 20 1.5 - 30 TPP-L10TPP-116 25 2 - 38 TPP-L12TPP-216 25 2 - 38 TPP-L14


Phone: 800.774.4643 • Fax: 800.768.9782

BALL BEARING INSTALLER KITInstalls ball bearings fast and easy without damage to seals or flanges. Sleeves are made of steel,heat treated and hardened for use with arbor press or mallet, admium plated for protectionagainst rust, and knurled for easy handling. Sleeve made about .025” larger than bore of bearing,and passes easily over shaft, providing a perfectly lined installation. Outside diameter fits innerrace of bearing. Long enough to use on standard NEMA shaft extension. Ranges from 200 Seriesball bearings (10mm I.D.) to 209 Series (45mm I.D.) Part No. TBI-10 Set of 10 sleeves for bearings10 to 45mm bore.

TBI-2010 6200/6300 TBI-2510 6205/6305TBI-2110 6201/6301 TBI-2610 6206/6306TBI-2210 6202/6302 TBI-2710 6207/6307TBI-2310 6203/6306 TBI-2810 6208/6308TBI-2410 6204/6304 TBI-2910 6209/6309

BALL BEARING PULLER ADAPTERSWhere bearings are recessed and cannot be held by the separator, a speciallydesigned set of Puller Adapters has been engineered. The carefully machined high-grade steel adapters can be slipped on the bearing in seconds; the adapter ring isthen set to contain the bearing. The Adapter, with the bearing enclosed, is set intothe separator holder for efficient removal of the bearing. The Ball Bearing Puller

Adapters are made in the following 6 sizes.

Part No. TGP-202 Adapter fits all "202" series bearings, having 35mm diameter ie. 202-3202-6202.Part No. TGP-203 Adapter fits all “203” series bearings, having 40mm diameter ie. 203-3203-6203.Part No. TGP-204 Adapter fits all “204” series bearings, having 42mm diameter ie. 204-3204-6204.Part No. TGP-205 Adapter fits all “205” series bearings, having 52mm diameter ie. 205-3205-6205.Part No. TGP-305 Adapter fits all “305” series bearings, having 62mm diameter ie. 305-3305-6305.Part No. TGP-306 Adapter fits all “306” series bearings, having 72mm diameter ie. 306-3306-6306.

STANLEY COMPO-CAST® HAMMERSThe most versatile, durable, all-purpose hammer available. As thorough as it is gentle. The entireexterior surface is solid molded urethane, virtually indestructable. Outlasts rawhide, nylon, rubber,brass or lead by 10 to 20 times. All models feature dead blow heads for sustained impact andmaximum striking force. Wrap around grip with flanged butt. No Mark - No Spark.

STANDARD MODELS

Part Face Head LENGTHnumber Dia.(IN.) Length(IN.) (IN.) Weight

TCH-OHD 1 1/2 3 1/8 10 l4 oz.TCH-lHD 1 3/4 3 3/4 11 1 1/2 lbs.TCH-2HD 2 4 1/4 12 3/4 2lbs.TCH-3HD 2 1/2 4 3/4 14 3lbs.TCH-4HD 2 3/4 5 1/4 16 4 lbs.

SLIMLINE MODELS

TCH-O-XHD 1 3 9 1/2 8 ozs.TCH-X02-HD 11/4 4 1/4 10 1/2 11/2 lbs.TCH-X03-HD 11/2 41/4 12 11/2 lbs.TCH-Xi-HD 13/4 5 1/4 13 2 lbs.

SLEDGE MODELS

TCH-4HD-1 2 3/4 7 20 7 lbs.TCH-12HD 3 1/2 8 30 l2 lbs.TCH-14HD 3 1/2 8 36 14 lbs.


Phone: 800.774.4643 • Fax: 800.768.9782

BEARING HEATERSLinmast Induction Bearing HeatersThe Linmast induction bearing heaters are the most innovative heaters to hit the market! Theirsuperior design is more accurate, safer to use, more efficient, and more cost effective than mostcompetitive brands. With six models to choose from, you can order yours today and discover thedifference!

FEATURES:

• Audible alarm notification • Digital temperature readout• Automatic demagnetization • Extremely simple operation• Safe method of heating • Programmable temperature setting• Six different models to choose from to cover a full range of bearing sizes• Comes with heat resistant gloves & additional cross bars

MODEL DESCRIPTION

TLBH-45C Induction Bearing Heater 1KVA, 110V, 18 lbs. max, additional cross bar: 9/16" x 9/16"TLBH-70C Induction Bearing Heater 2.2KVA, 110V, 66 lbs. Max, 2 additional cross bars:

9/16"x9/16", 1"x1"TLBH-70C-220V Induction Bearing Heater 3.6KVA, 220V, 66 lbs. Max, 2 additional cross bars:

9/16"x9/16", 1"x1"TLBH-90C Induction Bearing Heater 3.6KVA, 220V, 132 lbs. Max, 2 additional cross bars:

13/16"x13/16", 1-3/16"x1-3/16"TLBH-90H Induction Bearing Heater 8.5KVA, 440V, 220 lbs. Max, 2 additional cross bars:

13/16"x13/16", 1-3/16"x1-3/16"TLBH-120C Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, 2 additional cross bars:

1-9/16"x1-9/16", 2-3/8"x2-3/8"TLBH-120D Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, additional cross bars N/A,

twin-pole can heat 2 bearings at a time

Reco Induction Bearing heaterPart No. TRBH-805 Induction Bearing Heater. Includes set of 3 cross-bars listed in specs.

ACCESSORIES:

Part No. TRBH-1O Extra small bar used with 203 and 204 bearings size 1/2" x 1/2".

Part No. TST-213 Tempilstik Temperature Rating Marker. Rated at 213ºF.

Part No. TRBH-SC238 2-3/8" Raising Blocks.

Cone Thermo Bearing HeatersEasy to use. Mark with Thermo Crayon. When crayon mark melts, slip bearing on shaft. Open,shielded and sealed bearings mounted without damage to lubricants. Safe, no danger of fire orexplosion hazard. Heating time for small bearings is approximately two minutes, medium size fiveminutes, large bearings ten minutes or as required.

SPECIFICATIONS:

110 volts AC, 725 watts. Weight 8 lbs. Height 10". Mounts any bearing or gear with 3/4" to 8" bore.Comes complete with six foot heavy duty cord and switch, plus Thermo Crayon. Constructed ofaluminum for fast heat transfer. Also available in 240V AC.

Part No. TBH-160 Model B Bearing Heater for bearings to 5 3/4" bore.

Part No. TBH-170 Model C Heavy Duty Bearing Heater for bearings to 5 3/4" bore.

Part No. TBH-190 Model Super D Bearing Heater with temperature control for bearings to 8" bore.


Phone: 800.774.4643 • Fax: 800.768.9782

DAKE ARBOR PRESSESSingle LeverageThese Single Leverage Arbor Presses feature a shimmed ram cap, adjustable handle, and smoothaction gears. They also have base opening and slotted table plates, pedestals, and table platesdepending on the model.

Models: X, Y, Pedestal Y, 00, 0, Pedestal 0, 1, Pedestal 1

Features • Shimmed ram cap permits take-up for potential wear. • Adjustable handle allows convenient handle positioning. • Smooth action gears permit finite ram control. • Base opening and slotted table plate for arbor work (models X and Y have a solid plate). • Pedestals available for models Y, 0 and 1. • Table plate on models 00, 0 & 1. Solid table on models X & Y.

Specifications capacity leverage ram size max work

model number (tons) ratio (inches) diameter (inches)

X 901001 1 25:1 1x1x7-1/2 7Y 901002 1-1/2 32:1 1x1x12 9

Pedastal Y 901003 n/a n/a n/a n/a00 901004 1 25:1 1x1x7-1/2 7

A B C D E F Gmodel throat largest max ram to max ram to length width height

(in) arbor (in) table (in) table plate (in) (in) (in) (in)

X 3-1/2 n/a 4-1/2 n/a 4-1/4 9-1/2 9Y 4-1/2 n/a 7-3/4 n/a 6 15 14/1/2

Pedastal Y n/a n/a n/a n/a 10 18 3600 3-1/2 1 5 4-1/2 4-1/4 9 9-3/8


Phone: 800.774.4643 • Fax: 800.768.9782

DAKE ARBOR PRESSESHand-Operated Hydraulic PressesThe Dake hand-operated hydraulic presses offer economical performance. These presses providethe following features:

Rapid ram return – starts as soon as release valve is opened and may be stopped at any point byclosing the valve.

By-pass hole – prevents excessive ram extension.

Adjustable table – permits easy vertical movement by means of self-locking hoist.

Rapid screw traverse of ram – permits quick, easy movement of the ram by means of a convenient handwheel.

Moveable workhead – is roller mounted on ball bearings for off-center positioning (except 25H).

Width Width Min Max HorizontalBetween Between Ram to Ram to Ram Workhead ScrewUprights Channels Table Table Travel Travel Travel Base Height Weight

Model Number Capacity A B C D E F JxK L

25H 07001 25 33 1/2 5 3/16 4 39 5 5 42-1/2x30 76 45050H 07002 50 32 3/4 7 1/4 5 40 4 20 3/4 7 43-1/2x36 85 81075H 07003 75 44 8 1/4 6 36 4 1/2 29 5/8 7 55x36 87 1245125H 07004 125 48 12 1/8 5 25 8 27 1/4 8 66x42 95 2750

Note: all measurements in inches except weight which is in pounds.


Phone: 800.774.4643 • Fax: 800.768.9782

DAKE ARBOR PRESSESElec-draulic I Hydraulic PressesThe Dake Elec-draulic I hydraulic presses are an advanced design, single-acting press with fin-gertip control. These presses provide the following features:

Electric operation – provides smooth, consistent pressing action.

Single-acting cylinder – provides fast, reliable pressing and internal spring return.

Rapid ram approach – quickly moves ram to work to save production time.

Rapid ram speed – allows fingertip control of ram movement for precise pressure control.

Rapid ram return – starts ram return as soon as release valve is opened and may be stopped atany point by closing the valve.

Moveable workhead – is roller mounted on ball bearings for off-center work.

Safety valve – protects against overloads.

Stroke indicator – ensures accurate ram control.

Adjustable table – permits easy vertical movement by means of self-locking hoist.

Models

Ram Speed (inches per minute)Model Number Capacity (tons) Hoursepower RPM Advance Press

5-025 05025 25 2 1800 80 145-050 05050 50 2 1800 40 75-075 05075 75 2 1800 28 55-150 05150 150 2 1800 16 2 3/45-200 05200 200 3 1800 16 2 3/4

Specifications

Width Width Min Max HorizontalBetween Between Ram to Ram to Ram WorkheadUprights Channels Table Table Travel Travel Base Height Weight

Model A B C D E F JxK L

5-025 32 3/4 7 1/4 5 40 10 14 3/8 43-1/2x36 85 10005-050 32 3/4 7 1/4 5 40 10 14 3/8 43-1/2x36 87 13205-075 44 8 1/4 6 36 10 24 55-1/2x36 86 16505-150 48 12 1/4 10 30 16 22 1/8 66x42 95 30005-200 48 18 1/4 6 30 16 22 1/8 64x48 100 4380

Note: all measurements in inches except weight which is in pounds.


Phone: 800.774.4643 • Fax: 800.768.9782

IRD 206 VIBRATION METERThe IRD Balancing Model 206 Vibration Meter is a hand held, battery powered vibration meteravailable in either metric or imperial versions. The meter is capable of measuring the overallamplitude of vibration and displaying the result in units of Velocity (mm/s or in/s) or Acceleration(g peak). The unit is supplied with a protective carrying pouch and includes an accelerometer,extension probe and 1.2 meter connecting cable. The vibration meter is powered by an internal 9Volt (PP3) battery.

The Model 206 is rugged and easy to use. It is ideally suited to workshop and remote site use. Themeter automatically switches off after approximately one minute to preserver battery life. The unitdisplays a warning sympbol on the display screen when the battery requires replacement.

There is an internal test function to check the integrigty of the sensing probe, this tests the transducer bias voltage to ensure that it is within the speicified range.

Frequency Range: 10 Hz – 1 kHz

Range: 0-50 mm/s pk or 0-2 in/s pk, 0-20g pk

Meter Size: 125mm x 80mm x 25mm

Weight: 180g

Power: 9v battery (pp3)

Battery Life: 30 hours typical dependant on usage and battery type.

Vibration Probe: Piezo electric accelerometer

Weight: 172g

Sensitivity: 100mv/g

Part Numbers: E48505M Model 206 Vibration Meter (complete package - Metric units)E48505 Model 206 Vibration Meter (complete package - Imperial units)

Spare Parts: E48504 Handheld vibration probe (accelerometer) for 206E48503 Probe spike stainless steelE43500 Connecting cable BNC to BNC 0.9m


Phone: 800.774.4643 • Fax: 800.768.9782

ACCUSHIM INC.SHAFT HOG Precision LASER Shaft Alignment System

The Shaft Hog puts laser alignment accuracy within reach of everyone!

• REDUCE MACHINERY VIBRATION

• LONGER BEARING LIFE

• LONGER SEAL LIFE

• FAST AND EASY ALIGNMENTS

The ergonomically designed control unit fits comfortably in one hand. The live displaymeans that you will get instant feedback when shimming or moving the machines. This

eliminates the guesswork and back and forth you're suffering through now. All of this at an affordable price that means a quick payback.

TECHNICAL DATAMEASURING UNITS

Housing material ABS plastic

Type of laser Diode laser

Laser wave length 670 – 675 nm

Laser class 2

Max laser power 1 mW

Max distance between measuring units 2.8 ft (850mm)

Type of detectors Single-axis PSD

Cable length 5.2 ft (1.6m)

Dimensions 3.4 x 3.1 x 1.5 in(87x79x39mm)

DISPLAY UNIT

Housing material ABS plastic

Display type LCD 1.4 x 1.9 in (35x48mm)

Battery type 2x1.5V "C" Alkaline (LR14)

Operating time 20 hours continuous

Auto power off After 1 hour if no activity

Display Resolution 0.1 mil (0.0001")(0.01 mm in metric mode)

Dimensions 9.1 x 3.2 x 2.4 in (230x81x62mm)

COMPLETE SYSTEM

Shaft diameter range with chain 20" maximum

Accuracy of system <2% ±0.00039 in

Temperature range 32 – 140°F (0 – 60°C)

Operating humidity Non-condensing

Weight in case 10 lbs

51

Phone: 800.774.4643 • Fax: 800.768.9782

NOTES

bearings - eis-inc.com · pdf fileno symbol: open l, ll: 1 seal, double seal z, zz: 1 shield,...

Documents