bedford cord weave
TRANSCRIPT
erbhushan@2015
Bedford Cord Weave …..
Er . Bhushan KumarWeaving Executive
Raymond Textiles Ltd
Vapi, Gujarat,India
http://avisionoftextiles.blogspot.in
A vision of Textile learning & sharing views.......
Bedford cord :
This weave produces the longitudinal warp lines in the cloth
with fine sunken lines between.
Name: Bedford cord, named after the town of Bedford in England.
http://avisionoftextiles.blogspot.in
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Features:-
1.Appearance: It can have the appearance of narrow-width stripes with thin lines
between.
2.Weave effect: the plain ends forming the sunken lines between the raised cords
3.Number of ends between the pairs of plain ends being varied according to the width
of cord required.
4.Cord effect is seen in face side not in back side.
5.Ends and picks are always of even number.
A vision of Textile learning & sharing views.......
Method of Construction:
1. Lifts with plain weave are first indicated. The number of ends between pair of
plain ends vary according to width of cord.
2. Insert warp float marks on 1st & 2nd pick of cord and on 3rd & 4th picks of
other cord.
3. Designs are completed by inserting plain weave on cord ends.
http://avisionoftextiles.blogspot.in
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Drafting and Denting: The plain ends are being drawn on the healds of front and
accordingly the lifting plan is made.
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Drafting and Denting:
In order to fully develop the sunken lines the plain should be separated by the slits
of the reed
In some cases however the plain ends are dented accordingly to the type of fineness
required.
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Drafting and Denting:
In some cases however the plain ends are dented accordingly to the type of fineness
required.
Sometimes the plain ends are woven two per slit and cord ends are three or four per
slit. The number of ends in the width of a cord has some influence
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Classification:
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Wadded Bedford Cord:
This structure contain thick wadding or padding ends which lie between the rib face
cloth and the weft floats on the undersides the arrangement to give greater
prominence to the cord.
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Twill Faced Bedford Cord:
It is an another modification of Bedford cord structure consist of the using warp twill
instead of plain weave for the picks which inter weave on the face of the cord stripes.
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
Why cords ?????????
Due to the force variations in structure the plain order is highly compact structure
and the plain ordered ends are forced downward.
Due to this plain ends form the sunken lines between the raised cords
Other region contains plain or twill order with the warp floats which allows the
other ends to move up. It forms raised cords
A vision of Textile learning & sharing views.......
http://avisionoftextiles.blogspot.in
END USES OF BED FORD CORDS:
Bed ford cords find a wide range of applications such as
1. Dress materials,
2. Military dresses,
3. Suiting's, woolen and worsted fabrics (heavy type).
A vision of Textile learning & sharing views.......
* http://avisionoftextiles.blogspot.in/ * for any queries or suggestions email at: [email protected] Dear reader your suggest
ions are valuable for me. * This article is just for information, I have tried to keep matters original, and any type of disputes will not be c
onsidered.
*all rights reserved*
http://avisionoftextiles.blogspot.in
Be Member on Face bookhttps://www.facebook.com/groups/1642940175970128/
http://avisionoftextiles.blogspot.in