bel 505 / 505 ‘s’ - clute packaging · 11/14/08 technical reference 66-11-12 effective:...

11/14/08

TECHNICAL REFERENCE 66-11-12 Effective: November, 2008

BEL 505 / 505 ‘S’ SEMI-AUTOMATIC CASE FORMER AND PACKING STATION

BEL 505 / 505 ‘S’ Preventive Maintenance Schedule BEL 505 / 505 ‘S’ Spare Parts & Maintenance Kit BEL 505 / 505 ‘S’ Optional Equipment Machine Layout Drawings Assembly & Parts Reference Drawings Control Diagrams

Wexxar Packaging Inc. Phone (604) 270-0811 • Fax (604) 270-7897

E-mail: [email protected]

B E L 5 0 5 / 5 0 5 S T E C H N I C A L R E F E R E N C E 2

66-11-12 11/14/08

BELCOR PREVENTATIVE MAINTENANCE GUIDE

BEL 505 & 505S Case Erector and Pack Station

D A I L Y

8 Hrs.

• Keep framework and Tower Guide Support clean of dirt build-up, grease and oil residues.

• Check that the lubricator reservoir is filled (Chevron Lubrication Oil FM, or equivalent), air pressure is regulated to the proper setting (80 PSI), and that any water is drained from the filter.

• Check for worn or broken air lines and connections.

• If supplied, check that all casters are in the locked position.

3

W E E K S

120 Hrs.

• Cycle all case width and length adjustments and check for binding.

• Clean and lightly lubricate Tower Guide Support with grease (JAX Magna-Plate 44-2 from Behnke Lubricants, or equivalent).

• Check Major Flap Folding Plates and Skate Wheels for damage; clean and lubricate (WD 40) as required.

• Inspect Case Stopper Rollers ( Red ) #25-386. Replace if worn or damaged.

3

M O N T H L Y

480 Hrs.

• Lubricate width adjustment lead screw with a Synthetic Teflon Grease ( Loctite – Super Lube )

• Inspect all pneumatic switches to ensure that they are properly adjusted and in good working order.

• Inspect all pneumatic cylinders and connections for worn or broken parts.

• Inspect Tee (floor adjustment) Vertical Guide Track to ensure that it is not bent or loose, and that the UHMW PS tape is not worn or missing.

• Inspect Cam Followers for wear and ensure that they properly slide in contact with Quick Adjust guides. Lubricate track and guides as required with a Synthetic Teflon Grease ( Loctite – Super Lube )

• Inspect Front and Rear Minor Flap Folders. Replace if bent or worn.

• Check that leg extensions are properly secured. Lubricate Swivel Caster(s) if equipped.

• Check for any loose or missing fasteners.

P A R T S

L I S T

00-009 Air Cylinder (1-1/16” X 2”) 00-010 Air Cylinder (3/4” X 1”) 00-012 Air Cylinder (1-1/4” X 3”) 00-118 Air Actuator 00-631 Speed Control Muffler 1/8” 04-011 Air Lubricant 02-154 Rod End ¼” 02-157 Rod End 7/16” 25-386 Case Stopper Rollers ( Red )


BEL 505 & 505 ‘S’ SPARE PARTS & MAINTENANCE KIT #70-014 11/14/2008 Description Qty. Remarks

1* Cylinder, 1-1/16" DIA. x 2" Pivot Mount 00-009 Tower & Rear Minor Flap Kicker DWG 55-069 & 55-195*

Part No.

1

2 Cylinder, 3/4" DIA. x 1" Spring Ret. Pivot Mount

13

00-010 2

Rod End, Female 1/4" NF 02-154

Flap Opener DWG 55-072

1 Flap opener cylinders DWG 55-072

3 Clevis

14

00-011

Rod End, Female 7/16" NF

1 Tower assembly DWG 55-069

02-157 1

4* Cylinder, 1-1/4” Dia. x 3" Pivot Mount 00-012

15 ¼ Dia. X 2 Shoulder Bolt

1

03-003

Major Folder DWG 55-078*

5 Air Valve - 1/8" 4-way, 5 Port, Man/Man 00-115

16 Thread Sealant 242, 10 Ml

1

03-276

Minor flap kicker DWG 55-195

1

6 Air Valve - 1/8" 4-way, 5 Port, Man/Spring

17

00-116

Air Lubricant

1

04-011

Body switch DWG 55-191

1

7

For refilling air lubricator

Air Pilot Actuator, Valve

18

00-118

UHMW, PS Tape, 1/2” X 1/16”

1

14-008

Rear kicker DWG 55-195

4ft. Sliding strip, control lever assemblies 55-192, 55-193

8 Air Valve – 1/8" 3-way, Man/Spring

19

00-119

Roller, Case Hold-Down, Packing Station

1

25-386

Control lever, LH & RH DWG 55-567 & 55-568

2

9 Air Valve – 4-way, 5 Ports, Air/Spring

20

00-120 1

Cylinder Clevis Connector Kit 40-107

Frame Assembly DWG 55-085

1

10 Air Valve - 1/8" 3-way Single Plunger

00-123

Alternative Parts for Custom Machines

1 Flap opener valve assy. 55-285 DWG 55-085

Description

11

Qty.

Flow Control 1/8", ¼" Tube

Remarks

00-200 4 Folder cylinders DWG 55-069 & 55-078

12 Muffler, 1/8"NPT, 505 00-631 2 Frame Assembly DWG 55-085

Major folder cylinders DWG 55-078

Tower assembly DWG 55-069 Screw thread locking

Frame Dwg. 55-085 Rear minor kicker assy. Dwg. 55-195

Part No. *1. Block Cylinder, 32mm x 2” stroke 00-020 2 HD Rear Minor Flap Folder

Option 70-194

*4. Cylinder, 1-1/2" Dia. X 3" stroke, Pivot Mount 00-024 2 HD Major Flap Folder

Option 70-257

66-11-12 11/14/08


66-11-12 11/14/08

Folder Lock-up Switch Option 70-128

The BEL 505 and 507 major flap folding plates can be locked in the ‘up’ or case support position using the lock-up switch. This permits the station to be used as a packing station [where empty cases may already be bottom sealed] without using the folding capabilities of the unit. The switch is installed as an extra cost option on the BEL 505 and 505 ‘S’. Please contact BELCOR for more information and retrofit installation instructions if you do not have this option and wish to add the lock-up capability to your machine.

Folder Lockup Switch


66-11-12 11/14/08

PLEASE NOTE: The following drawings are a reference guide for standard machine construction. We strive to provide up-to-date manuals with machines but we are continually improving our products and the details in the manual provided might not exactly match the machine at the time it is shipped. Many machines are modified in response to customer requests or as required by the case samples supplied at the time the machine is built and the manual may not provide a complete reference to the changes or modifications. Current replacement parts may be improved over original components and carry different part numbers or designations. PLEASE PROVIDE YOUR MACHINE SERIAL NUMBER(S) AT THE TIME OF A PARTS ORDER TO ENSURE THAT WE SUPPLY YOU WITH REPLACEMENT PARTS THAT WILL WORK WITH YOUR MACHINE.

MACHINE LAYOUT DRAWINGS:

BEL 505 Semi-Automatic Case Former and Packing Station 75-075-05

BEL 505S Small Semi-Automatic Case Former and Packing Station 75-256-02

ASSEMBLY & PARTS DRAWINGS:

Model 505 Packing Station 55-089-07 Model 505 Frame Assembly 55-085-06[B] Model 505 ‘S’ Packing Station 55-231-01 Model 505 ‘S’ Frame Assembly 55-232-05[B] Tower, General Assembly 55-069-06 Tower, Sub-Assembly 55-941-03 Major Folder 55-078-06 Major Folder, Wheel Pl. Assembly, Rear 55-926-01 Major Folder, Wheel Pl Assembly, Front 55-927-01 Major Folder, CYL Assembly 55-928-01 Major Folder, SQ Shaft, LH Sub-Assembly 55-946-02 Body Switch 55-191-03 Control Assy., R.H. V02 [Enclosed Slider] 55-567-07 Control Assy .,L.H. V.02 [Enclosed Slider] 55-568-07 Slider Assy., R.H., V.02 55-565-07 Slider Assy., L.H. V.02 55-566-07 Flap Opener 55-072-04 Rear (Minor Flap) Kicker 55-195-07 Rear Kicker, Acme Screw Assembly 55-945-03 Control Folder, Valve Assembly 55-935-02 Rear Minor Folder, CYL Assembly 55-929-02 Start/Stop Switch / F.R.L. 56-1260-01

CONTROL DIAGRAMS:

Pneumatic Control Circuit Diagram 60-016-08 Pneumatic Connection Diagram 120-056-03

[Bold indicates changes since last revision]

06 3D SOLID CONVERSION 02-05-01

REVISIONS

BELCOR INDUSTRIESTITLE

DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D): APPROVED BY:DESCRIPTION APPROVEDBY

(3D SOLID DRAWING)THIRD ANGLE PROJECTIONDO NOT SCALE DRAWING

MATERIAL: DIMENSIONS ARE IN INCHES

DATE

COLOR:

CODE:

SIZE:

FINISH:

TOLERANCES: .XXX .005 .XX .010 .X .015 FRACT.: 1/32 ANGUL.: 1

REV.

SEE PARTS' LIST

AJ/PSPRV

BEL 50596-11-28

SHEET 1 OF 2 (EXPLODED VIEW)

B 55-085ASSEMBLY, PACKING STATION

BEL 505, FRAME 16" MAX. WIDTH

06

47

40 322931

30

6

3739

36

7

4311

1326

28 2221

19

1918

4

173242 33

12

14

2715

3516

2

4

25

41 4141

10

12324

3739

36

5

8

9

3836

37

25

403229 3130

3

3334 32

3639 37

28

2828

43

25

13

2122

3639

37

33 3432 25

4445

46

CASE HOLD-DOWN ROLLERPART# Z25-386, BOTH SIDES

?

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 55-445 01 BOTTOM FRAME 16" W SEE PARTS' LIST 12 B 40-128 02 GUIDE, WIDTH ADJ, RH, SEE PART LIST 13 B 40-127 02 GUIDE, WIDTH ADJ, LH, SEE PART LIST 14 B 55-195 07 SUB-ASSY, REAR KICKER SEE PARTS' LIST 15 B 55-082 03 MAIN PLATE ASSY, R.H. SEE PARTS' LIST 16 B 55-081 03 MAIN PLATE ASSY, L.H. SEE PARTS' LIST 17 B 55-078 06 MAJOR FOLDER, L.H. 505/507 SEE PARTS' LIST 18 B 55-079 06 MAJOR FOLDER, L.H. 505/507 SEE PARTS' LIST 19 Z 55-567 07 CONTROL ASSY, RH,16" V.02 SEE PARTS' LIST 1

10 Z 55-568 07 CONTROL ASSY, LH,16" V.02 SEE PARTS' LIST 111 Z 55-069 06 TOWER ASSY, MINOR FOLDER SEE PART LIST 112 Z 25-360 03 GUIDE BAR AL FB 113 B 25-361 04 SLIDING GUIDE NYLATRON 214 B 25-359 02 GUIDE SUPPORT AL FB 115 B 25-384 07 SLIDING PLATE SS304, 14GA, 116 B 25-392 02 COVER PLT. FRAME ALUM. F.B. 217 B 25-280 02 SLIDING PL, 505/507-16" FLAT,AL,3/8X1 1/2 218 B 25-631 03 BAR, SUPPORT, 505/507-16" FLAT,AL,1/2X1 119 B 25-632 02 SLIDE STRIP, GUIDING PLATE UHMW TAPE 320 B 25-632-M1 01 SLIDE STRIP, 7" LG, GUIDING PLATE UHMW TAPE 421 B 25-385 06 SPACER, 1OD, 3/8 ID,1/4 THK DELRIN,R.B.1" 222 B 04-028 HANDLE, ADJUST, 5/16X1.18 223 B 03-066 HEX HEAD SCREW, HHCS 7/16-14x1 SS 424 B 03-194 WASHER, LOCK, WL, 7/16 SS 425 B 03-173 HSFHCS 5/16 C X 1 1/4 S SS 726 B 03-035 HSSB 3/8 C X 3/8 A 127 B 03-164 HEX . CSK SCREW #10 X 3/8 SS 328 Z 03-166 HSFHCS 1/4 C X 3/4 S SS 529 Z 03-137 WFL 1/4 B R 0.063 SS 1030 Z 03-134 WL-1/4 SS SS 1031 B 03-156 HSHCS 1/4 C X 1 S SS 832 B 03-187 WASHER, FLAT, WFL 5/16 SS 1433 B 03-192 WASHER, LOCK 5/16 SS 834 Z 03-083 NUT,HEX 5/16 C S SS 435 B 03-122 HSBHCS #10-24 x3/8 SS 436 Z 03-025 WASHER, FLAT, WFL 3/8 SS 637 Z 03-193 LOCK WASHER, WL 3/8 SS 638 B 03-062 HHCS 3/8-16x1 1/4 SS 239 B 03-061 HHCS 3/8C X 1 S SS 440 B 03-210 HSHCS 5/16 C X 1 S SS 641 Z 03-047 HHCS 1/4 C X 3/4 S SS 242 B 03-055 HHCS 5/16 C x 1 S SS 443 B 03-162 HSHCS 3/8-16x 1 1/4 SS 444 Z 00-744 CROSS A,1/4" TUBE,PISCO 145 B 55-196 04 VALVE ASSY SEE PART LIST 146 B 55-285 02 AIR VALVE, FLAP OPEN SEE PART LIST 147 B 00-743 UNION "Y" 1/4" TUBE 2

6

19

18

18

1716

9

1

10

15

7

6

43

8

21

2

21

14

20

13

22

23

22

23

25

2524

26

27

28

11

12

6

5

CASE HOLD-DOWN ROLLERPART# Z25-386 [BOTH SIDES]

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 56-059 01 BOTTOM FRAME, BOLTED, 505S SEE PARTS' LIST 12 B 55-195 07 SUB-ASSY, REAR KICKER SEE PARTS' LIST 13 B 55-235 03 MAIN PLATE, LH SEE PART LIST 14 B 55-236 03 MAIN PLATE, RH SEE PART LIST 15 Z 55-233 05 MAJOR, FOLDER, LH,505S SEE PART LIST 16 Z 55-234 05 MAJOR, FOLDER, RH, 505S SEE PART LIST 17 B 55-565 07 SLIDER ASSY, R.H., 16" V.02 SEE PARTS' LIST 18 B 55-566 07 SLIDER ASSY, L.H., 16" V.02 SEE PARTS' LIST 19 B 40-127 02 GUIDE, WIDTH ADJ, LH, SEE PART LIST 1

10 B 40-128 02 GUIDE, WIDTH ADJ, RH, SEE PART LIST 111 Z 55-295 05 TOWER, U/W 5" CASE, 505S SEE PART LIST 112 B 26-060 02 GUIDE BAR AL, FLAT BAR 113 B 26-059 02 GUIDE SUPPORT PLATE FLAT,AL,3/8X1 114 B 25-384 07 SLIDING PLATE SS304, 14GA, 115 B 25-363 04 MT. PL, EXIT ROLLERS, 505 FLAT,AL,3/8X2 1/2 116 B 55-196 04 VALVE ASSY SEE PART LIST 117 B 55-285 02 AIR VALVE, FLAP OPEN SEE PART LIST 118 B 00-743 UNION "Y" 1/4" TUBE 219 B 27-079 01 COVER PLATE, MT AL, FLAT BAR, 1/8" 120 Z 00-744 CROSS A,1/4" TUBE,PISCO 121 B 26-196 03 SLIDING PL., 505 U/W 5" ALUM, FLAT BAR 222 B 25-385 06 SPACER, 1OD, 3/8 ID,1/4 THK DELRIN,R.B.1" 223 B 04-028 HANDLE, ADJUST, 5/16X1.18 224 B 25-631 03 BAR, SUPPORT, 505/507-16" FLAT,AL,1/2X1 125 B 25-632 02 SLIDE STRIP, GUIDING PLATE UHMW TAPE 326 B 25-361 04 SLIDING GUIDE NYLATRON 227 B 55-683 01 FLAP OPENER, RH, U/W 3.5 SEE PART LIST 128 Z 55-684 01 FLAP OPENER, LH, U/W 3.5 SEE PART LIST 1

18 1

7/32

"

27"

25"

20 4

3/64

"

-

ECO # 1431

-

-

05

- -

02-04-04 -

-

-

-

- - -

REVISIONS

DESCRIPTION APPROVED

MACHINERY INC.

TITLE

DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D): APPROVED BY:

WEXXAR PACKAGING BELCOR INDUSTRIES DIVISION

BY



DATE

COLOR:

CODE:

SIZE:

FINISH:


REV.

-AJ/PS

PRVBEL 505S

97-04-21

SEE PARTS' LIST

--

- Z 55-232PACKING STATION

FRAME ASSY, BEL 505S

05

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WEXXAR PACKAGING MACHINERY INC. - BELCOR INDUSTRIES DIVISION. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WEXXAR PACKAGING MACHINERY INC. - BELCOR INDUSTRIES DIVISION IS PROHIBITED.

11 3/4"

15 3/4"

8 3/4"

4"

12 1/4"

8 1/2"

3

6

1

4 5

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 Z 55-941 03 TOWER SUB-ASSY SEE PART LIST 12 B 40-057 02 LOCKING HANDLE SEE PART LIST 13 Z 55-931 02 CASE GUIDE, TOWER ASSY SEE PART LIST 14 B 03-187 WASHER, FLAT, WFL 5/16 SS 25 B 03-192 WASHER, LOCK 5/16 SS 26 B 03-159 HSHCS 5/16 C X 1 1/4 S SS 2

505/50796-11-26

AJ/PS

SEE PART LIST

00-12-18

PS

SUB-ASSY 55-931 & 55-941 CREATED

UPDATED WITH 22-931-02 & 55-941-03 - ECR 2007.2.21-7

05

06 07-03-22 PRV

STD, PACKING STATIONZ 55-069

TOWER ASSY, MINOR FOLDER

06DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE

DO NOT SCALE DRAWING

(3D SOLID DRAWING)

DIMENSIONS ARE IN INCHES

THIRD ANGLE PROJECTION

FINISH: APPROVED BY:

CODE:

SIZE:

MATERIAL:

COLOR:


REV.

PT

PS

CORRECTING PART TO 03-092 WAS 03-093

UPDATED WITH 40-076-05 ECR 2007.2.21-7

02

03 07-03-20

06-05-01

PRV

PACKING STATIONZ 55-941

TOWER SUB-ASSY

03505/507

00-12-15ZB

SEE PART LIST

DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


(3D SOLID DRAWING)




CODE:

SIZE:

MATERIAL:

COLOR:


REV.

1/2"

11 1/4"

1/2"

3"

8 1/2"

2 1/2"

25

1

11

4

10

13

3

12

6

9

2

7

ITEM PART NO. REV. DESCRIPTION QTY. 1 Z 40-076 05 TOWER, 16", WELDED 12 B 25-415 03 SPACER 23 B 27-114 02 PIN, PIVOT, TOWER FOLDER 14 B 55-386 01 FRONT KICKER ASSY 15 B 00-546 ELBOW 45 DEG EXTRUDED STREET, 1/8 DIA 16 B 00-011 CLEVIS, CYL. ROD, 5/16 UNF 17 B 00-200 FLOW CONTROL, 1/8 NPT, 1/4 TUBE 28 B 00-009 CYLINDER, AIR,1.062 X 2 19 B 00-711 1/8" NPT 90° CONNECTOR 110 B 03-003 HSSB, 1/4"DIA. X 2"A 111 B 03-179 HEX SOCKET SET SCREW #10 X 1/4" 212 B 03-033 01 CLEVIS PIN, 113 B 03-092 NUT,NYLOCK 10/24 1

4"

11 3/4"

4"

1.25

3/8"

02 03-06-0525-278 REVISED, ASSY UPDATED PT

00-12-08

SEE PART LIST

ZB/PS505/507

-

MAJOR FOLDER, 505/507B 55-946

SUB-ASSY, SQUARE SHAFT,LH

02DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE

DIMENSIONS ARE IN INCHESDO NOT SCALE DRAWINGTHIRD ANGLE PROJECTION

APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)

TOLERANCES: .XXX .005 .XX .010 .X .015 FRACT.: 1/32 ANGUL.:

REV.

3

2

1

43

4

5

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 25-341 07 SHAFT, SQ, FOLDER, 505/ 12 B 25-278 05 BAR, CYL LEVER, MAJOR FOLDER 13 B 25-172 04 BEARING HOUSING, 24 B 02-105 BEARING, 3/4"ID SPHERICAL 25 B 03-124 HSHCS 1/4 C X 1 1/4 S 2

93

1

3"

3"

8 3

4

7

9

6

11

5

2

3"

3/4"

10

12

ITEM PART No. REV DESCRIPTION QTY.1 B 25-337 05 MOUNTING PLATE, 12 B 00-116 VALVE, 4WAY, MAN/SPRING 13 B 25-338 03 LEVER, BODY SWITCH 14 B 25-925 03 ROLLER, BODY SWITCH, 15 B 00-701 CONNECTOR, MALE, 1/4 OD X 1/8 NPT 26 B 00-707 ELBOW, MALE 1/4 OD X 1/8 NPT 17 B 03-034 STP-1/8"DIA X 1",MS 18 B 03-242 SET SCREW, HSSS 1/4-20x3/8 19 B 03-014 HEX SOCKET SHOULDER BOLT, 3/8"DIA. X 5/8" 1

10 B 03-300 HEX SOCKET SHOULDER SCREW, 5/16"DIA. X 5/8" 1

11 B 03-072 PHMPS (PHILIPS) SCREW 6-32x1 2

VALVE, SWITCH, BODY, ASSYBEL 505/S-507

B 55-191 03A.J505/S/507

96-11-26

SEE PART LIST BELCOR INDUSTRIESTITLE

DWG.NO. REV.

MODEL: DRAWN BY:


DIMENSIONS ARE IN INCHESDO NOT SCALE DRAWINGTHIRD ANGLE PROJECTION(3D SOLID DRAWING)


COLOR:FINISH:

MATERIAL:

SIZE:

CODE:DATE BY APPROVEDDESCRIPTION

REVISIONS

REV.

3D SOLID CONVERSION

REPLACED 03-040 BY 03-072

02

03 03-04-08

99-09-20

PT


ENCLOSED SLIDER

Z 55-567

CONTROL ASSY, RH,16" V.02

07PT/PS

PRVBEL 505/507

99-09-16

SEE PARTS' LIST

DESCRIPTION APPROVEDBY

DIMENSIONS ARE IN INCHES MACHINERY INC.

TITLE

DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):


REVISIONS

DATE


(3D SOLID DRAWING)

BELCOR INDUSTRIES DIVISIONWEXXAR PACKAGING


CODE:

SIZE:

MATERIAL:

COLOR:


REV.

UPDATED WITH 55-565-07 (NYLON TIP SET-SCREWS ADDED)

40-077-M1 REPLACED 40-077 - PRODUCTION W.LO07

06 PS05-05-17

07-07-18 PS PRV

13"

14"

8 31/32"

5 7/16"

6 11/32"

2

5

1

7

6

3

9

5

8

8

4

55-568 LH

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 55-565 07 SLIDER ASSY, R.H., 16" V.02 SEE PARTS' LIST 12 B 55-937 03 VALVE ASSY, R.H. FLOOR SWITCH REVISED DWG 13 B 55-071 05 FLAP OPENER, RH. SEE PARTS' LIST 14 Z 40-077-M1 03 CTRL VALVE LEVER, RH 505/ SEE PARTS 15 Z 03-083 NUT,HEX 5/16 C S SS 26 Z 03-134 WL-1/4 SS SS 27 B 03-206 HSBHCS, Ø1/4 X 5/8 LG SS 28 Z 03-135 LOCK WASHER, #10 SS 49 B 03-152 HSHCS 10 C X 1 1/4 S SS 2

5

8

9

2

85

7

61

3

4

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 55-566 07 SLIDER ASSY, L.H., 16" V.02 SEE PARTS' LIST 12 B 55-963 01 VALVE ASSY, LH FLOOR SWITCH SEE PART LIST 13 B 55-072 04 FLAP OPENER, LH. SEE PARTS' LIST 14 Z 40-142-M1 03 CTRL VALVE LEVER LH, 505/ SEE PARTS 15 Z 03-083 NUT,HEX 5/16 C S SS 26 Z 03-134 WL-1/4 SS SS 27 B 03-206 HSBHCS, Ø1/4 X 5/8 LG SS 28 Z 03-135 LOCK WASHER, #10 SS 49 B 03-152 HSHCS 10 C X 1 1/4 S SS 2

55-567 RH

5 7/16"


ENCLOSED SLIDER

Z 55-568

CONTROL ASSY, LH,16" V.02

07BEL 505/507

99-09-16PT/PS

PRV

SEE PARTS' LIST

CODE:

SIZE:

MATERIAL:

MODEL: DRAWN BY:


DIMENSIONS ARE IN INCHES MACHINERY INC.

TITLE

DWG.NO.

APPROVEDDATE

FINISH:REVISIONS

BELCOR INDUSTRIES DIVISION

BYDESCRIPTION


REV.COLOR:

THIRD ANGLE PROJECTION(3D SOLID DRAWING)

WEXXAR PACKAGINGTOLERANCES: .XXX .005 .XX .010 .X .015 FRACT.: 1/32 ANGUL.: 1

REV.

PS07-07-1807

UPDATED WITH 55-566-07 (NYLON TIP SET-SCREWS ADDED) 05-05-1706 PS

40-142-M1 REPLACED 40-142 - PRODUCTION W.LO PRV

13"

8 31/32"

14"

8 11/16"

55-565

SLIDER ASSY, R.H., 16" V.02[REPLACEMENT] 505/507

B 07REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:


(3D SOLID DRAWING)THIRD ANGLE PROJECTIONDO NOT SCALE DRAWINGDIMENSIONS ARE IN INCHES

DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

PS03-471 REPLACED 03-054

4X 03-506 ADDED, UPDATED WITH 27-116-09

06

07 05-05-17

03-11-18

PS

99-09-16PT/PS

PRVBEL 505/507

SEE PARTS' LIST

MIS-ALIGNMENT 162

17

15

4

1

3

11

12

13

14

7

6

9

13

5

2

8

10

POSITION PINS:DRILL TWO 3/16 DIA. HOLESIN PN 27-116 TO SECURE THE ASSEMBLY AGAINST

17

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 40-569 03 ADJUST TRACK, STD. 505/507 SEE PARTS' LIST 12 B 27-116 09 PLATE, MOUNT, ADJ. SLIDER AL FB 1/2 13 B 02-150 CAM FOLLOWER YOLK TYPE, 3/4" DIA. 24 B 27-115 02 PLATE, SLIDER, CASE LEVER DELRIN 15 B 27-120 04 COVER, CAM FOLLOWER AL FB 1/8 16 B 27-154 10 MT PL, GUIDE BEARING, 505 AL, FLAT BAR 17 B 55-785 02 CAM FOLLOWER ASSY, FLOOR SEE PARTS' LIST 18 B 03-378 STP-3/16"DIA X 1/2",MS 29 B 03-192 WASHER, LOCK 5/16 SS 2

10 B 03-471 HHCS 5/16 C x 5/8 SS SS 211 B 03-047 HEX HEAD SCREW, HHCS 1/4-20x3/4 SS 112 B 03-137 WASHER, FLAT 1/4 x 1/16 SS 313 B 03-134 WASHER, LOCK, 1/4 SS 314 B 03-048 HEX HEAD SCREW, HHCS 1/4-20x1 SS 215 B 03-167 HEX SOCKET CSK SCREW 1/4" X 1 1/4 SS 216 B 27-043 07 MT. ANGLE, RH, FORMED SS304 11 GA 117 B 03-506 - HSSS-NYLON TIP-5/16 UNC x 1/2, S SS 4

15

13

17

2

10

12

1

16

16

45

10

11

8

14

13

7

119

3

6

14

3

17

9

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 40-569 03 ADJUST TRACK, STD. 505/507 SEE PARTS' LIST 12 B 27-116 09 PLATE, MOUNT, ADJ. SLIDER AL FB 1/2 13 B 02-150 CAM FOLLOWER YOLK TYPE, 3/4" DIA. 24 B 27-115 02 PLATE, SLIDER, CASE LEVER DELRIN 15 B 27-120 04 COVER, CAM FOLLOWER AL FB 1/8 16 B 27-154 10 MT PL, GUIDE BEARING, 505 AL, FLAT BAR 17 B 27-042 07 MT. ANGLE, LH, FORMED SS304 11GA 18 B 55-785 02 CAM FOLLOWER ASSY, FLOOR SEE PARTS' LIST 19 B 03-378 STP-3/16"DIA X 1/2",MS 210 B 03-192 WASHER, LOCK 5/16 SS 211 B 03-471 HHCS 5/16 C x 5/8 SS SS 212 B 03-047 HEX HEAD SCREW, HHCS 1/4-20x3/4 SS 113 B 03-137 WASHER, FLAT 1/4 x 1/16 SS 314 B 03-134 WASHER, LOCK, 1/4 SS 315 B 03-048 HEX HEAD SCREW, HHCS 1/4-20x1 SS 216 B 03-167 HEX SOCKET CSK SCREW 1/4" X 1 1/4 SS 217 B 03-506 - HSSS-NYLON TIP-5/16 UNC x 1/2, S SS 4

POSITION PINS:DRILL TWO 3/16 DIA. HOLESIN PN 27-116 TO SECUREASSEMBLY AGAINSTMIS-ALIGNMENT

FIELD REPLACEMENT SUB-ASSEMBLY FOR16" CASE WIDTH [STD.] MACHINES. FORFULL SUB-ASSEMBLY WITH FLOOR SWITCHVALVE AND FLAP OPENER MECHANISMS,SEE 55-568

SLIDER ASSY, L.H., 16" V.02

55-566[REPLACEMENT] 505/507

B 07CODE:

DATE BY APPROVEDDESCRIPTION

REVISIONS


DWG.NO.

SIZE:

MATERIAL:

FINISH:

MODEL:

DO NOT SCALE DRAWINGTHIRD ANGLE PROJECTION

REV.COLOR:

1(3D SOLID DRAWING)


APPROVED BY:DATE(Y-M-D):

DRAWN BY:


REV.

4X 03-506 ADDED, UPDATED WITH 27-116-09

06

07 05-05-17

03-11-18 PS03-471 REPLACED 03-054

PS

BEL 505/50799-09-16

PT/PSPRV

SEE PARTS' LIST

8 9/16"

3"

DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


(3D SOLID DRAWING)




CODE:

SIZE:

MATERIAL:

COLOR:


REV. BEL 505/50796-11-20

AJ/PSPRV

SEE PARTS' LIST

MAJOR FLAP FOLDERB 55-072

FLAP OPENER, LH.

04

04 03-04-2103-006 REPLACED BY 03-048 & 03-082 PT

4

1

13

6

8

3

2

10

9

512

11

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 14-058 UHMW, PS TAPE, 3 x1/16" UHMW 12 B 25-365 05 MT PL, FLAP OPENER, 505/ AL FB 13 B 25-382 03 SPACER, AIR CYLINDER SS303, R.B. 14 Z 25-356 06 FLAP OPENER LEVER, 505/ AL FB 15 B 03-015 HSSB 1/2 C X 5/8 A ALLOY 16 B 03-005 HSSB 5/16 C X 1/2 A ALLOY 17 B 02-154 01 ROD END FEMALE PLATED STEEL 18 B 00-010 01 CYLINDER, AIR, .75 X 1 19 B 03-048 HHCS 1/4 C X 1 S 110 Z 03-047 HHCS 1/4 C X 3/4 S SS 111 B 03-082 NUT,HEX 1/4 C S SS 112 B 02-180 BUSHING 1/2"IDX5/8"ODX1/2 113 B 00-711 1/8" NPT 90° CONNECTOR 1

2 9/64"

APPROVEDDESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:BYDATE

CODE:

APPROVED BY:

THIRD ANGLE PROJECTIONDO NOT SCALE DRAWING

DATE(Y-M-D):

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)

DIMENSIONS ARE IN INCHES TOLERANCES: .XXX .005 .XX .010 .X .015 FRACT.: 1/32 ANGUL.:

REV.

PRVBEL 505/505S/507

96-11-27AJ/PS

SEE PARTS' LIST

B 55-195BEL 505/505S/507

SUB-ASSY, REAR KICKER

07

P/N 22-201 REMOVED ( NOT NEEDED W.LO) 06-05-23 PS

SUB-ASSEMBLIES 55-929, 55-930, 55-935 & 55-945 CREATED

22-201 ADDED TO ASSY

07

05

06 04-06-24

00-12-15

PS

PRV

6

3

3

1

2

7

4

75

USE OPTION 70-194FOR HD REAR MINOR FOLDEROPTION

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 55-945 03 ACME SCREW ASSY, WIDTH SEE PARTS' LIST 12 B 55-930 01 ROLLER ASSY SEE PART LIST 13 B 55-929 02 CYL, ASSY, REAR MINOR FOLDER SEE PART LIST 14 B 55-935 02 VALVE ASSY, CTRL, FOLDER MT SEE PART LIST 15 B 02-316 SPINDLE, ADJ, 1/4-NCx1 5/8" 16 B 03-082 NUT,HEX 1/4 C S SS 17 B 02-102 BEARING, 3/4" FLANGE, CRS 2

3

4

1

2

2

4

ITEM PART No. REV DESCRIPTION QTY.1 B 00-115 AIR VALVE, 1/8", 4 WAYS, MAN/MAN, 5 PORTS 12 B 00-707 ELBOW, MALE 1/4 OD X 1/8 NPT 23 B 00-118 AIR ACTUATOR 14 B 00-711 1/8" NPT 90° CONNECTOR 2

VALVE ASSY, CTRL, FOLDER MTREAR MINOR

B 55-935 02Z.B505/S/507

00-12-14


DWG.NO. REV.

MODEL: DRAWN BY:




COLOR:FINISH:

MATERIAL:

SIZE:


REVISIONS

REV.

REMOVED 00-707(1), ADD 00-711(1)02 02-11-04 PT

7"4"

3"

9 9/32"

2 1/2"

1

6

4

3

8

5

2

7

9

7

11 10

PSI GAUGE

ITEM PART NO. REV. DESCRIPTION QTY. 1 Z 26-612-M1 01 MT. PLATE, START/STOP 12 B 26-613 01 COVER PLATE, 13 B 00-114 AIR VALVE, 3 WAY, 1/8 NPT 14 B 00-701 CONNECTOR, MALE,1/4 ODx1/8 NPT 15 B 00-707-M1 ELBOW MALE, 1/4 TUBE 1/8 NPTF 16 B 00-603 ADAPTER, REDUCE 1/4x1/8"DIA, [1/4 TO 1/8" DIA] 17 B 00-708 ELBOW MALE 1/4" OD TUBE X 1/4 NPT 28 B 03-151 HSHCS 10 C X 1 S 29 Z 00-266 01 F.R.L. 1/4" AC20A-N02CE-3CZ 1

10 B 03-186 WASHER, FLAT #10 211 B 03-149 HSHCS 10 C X 3/8 S 2

PS505/505S/507/505G307-10-10 PRV

SEE PART LIST

REVISIONS

DESCRIPTION APPROVED

MACHINERY INC.

TITLE

DWG.NO. REV.

MODEL: DRAWN BY:


WEXXAR PACKAGING BELCOR INDUSTRIES DIVISION

BY



DATE

COLOR:

CODE:

SIZE:

FINISH:


REV.


SMC VALVES, ASSEMBLY

Z 56-1260

START/STOP SWITCH & F.R.L

01

-

-

02 -

-03 - -

66-13-2 4/12/2007

TECHNICAL REFERENCE 66-13-2 Effective April 12, 2007 Replaces 66-13-1; May 17, 2001

BEL 505XL LARGE CASE ERECTOR & PACK STATION

Preventative Maintenance Schedule BEL 505XL Spare Parts & Maintenance Kit Assembly & Parts Reference Drawings Control Diagrams

Wexxar Packaging Inc. Phone (604) 270-0811 • Fax (604) 270-7897

E-mail: [email protected]

B E L 5 0 5 X L T E C H N I C A L R E F E R E N C E 2

66-13-2 04/12/07 Wexxar Packaging Inc.

Phone (604) 270-0811 • Fax (604) 270-7897 E-mail: [email protected]

PREVENTATIVE MAINTENANCE - BEL 505XL Large Case Packing Station

D A I L Y

8 Hrs.

Keep framework and Tower Guide Support clean of dirt build-up, grease and oil residues. Check that the lubricator reservoir is filled (Chevron Lubrication Oil FM), air pressure regulated to the proper setting (80 PSI), and that any water is drained for the filter. Check for worn or broken air lines and connections. If supplied, check that all casters are in the locked position.

3

W E E K S

120 Hrs.

Cycle all case width and length adjustments and check for binding. Clean and lightly lubricate Tower Guide Support with a Synthetic Teflon Grease ( Loctite – Super Lube ). Cycle and inspect pneumatic tilt cylinder and bearings for wear, lubricate as required. Check Major Flap Folding Plates and Skate Wheels for damage, clean and lubricate (WD 40) as required. Inspect Case Stopper Rollers ( Red ) #25-386, replace if worn or damaged.

3

M O N T H L Y

480 Hrs

Lubricate width adjustment lead screw with a Synthetic Teflon Grease ( Loctite – Super Lube ) Inspect all pneumatic switches that they are properly adjusted and in good working order. Inspect all pneumatic cylinders and connections for worn or broken parts. Inspect Tee (floor adjustment) Vertical Guide Track, ensure that it is not bent or loose, and that UHMW PS tape is not worn or missing. Inspect Cam Followers ensure that they are not worn and slide in contact with Quick Adjust guides. Lubricate track and guides as required with a Synthetic Teflon Grease ( Loctite – Super Lube ) Inspect Front and Rear Minor Flap Folders. Replace if bent or worn. Check that leg extensions are properly secured, lubricate Swivel Caster(s) if equipped. Check for any loose or missing fasteners.

P A R T S

L I S T

00-009 Air Cylinder (1-1/16” X 2”) 00-116 Air Valve 1/8” 4Way 00-012 Air Cylinder (1-1/4” X 3”) 00-121 Pulse Valve 00-631 Speed Control Muffler 1/8” 00-200 Speed Control Muffler ¼” 02-153 Rod End 5/16” 02-157 Rod End 7/16” 04-011 Air Lubricant




BEL 505XL SPARE PARTS & MAINTENANCE KIT #70-203 01-30-01

Description Part No. Qty. Remarks

CYLINDER, 1-1/16" DIA. X 2" PIVOT MOUNT 00-009 2 Minor Folder

DWG 55-435 & 55-436

CYLINDER, 1 1/4" DIA. X 3" PIVOT MOUNT 00-012 2 Major Folder

55-442, 55-443, 55-553 & 55-554

SEAL KIT (REBUILD) FOR ROTARY VANE ACTUATOR 00-021

00-023 2 Flap Opener DWG 55-437 & 55-438

AIR VALVE - 1/8" 4-WAY, 5 PORT, MAN/SPRING 00-116 1 Body Switch

DWG 55-412

PULSE VALVE, ONE SHOT 00-121 1 Flap Opener DWG 55-507

AIR VALVE – 1/8" 4-WAY, 5 PORT, AIR/AIR 00-132 1 Flap Opener

DWG 55-507

AIR VALVE, THRESHOLD SENSOR, 1/8" NPT

00-133 1 Flap Opener DWG 55-507

FLOW CONTROL 1/8", 1/4" TUBE 00-200 2 Major & Minor Folders DWG 55-507

MUFFLER, SPEED CONTROL, 1/4" NPT PORT 00-631 2 Flap Opener

DWG 55-507

ROD END, FEMALE 5/16" NF 02-153 2 Minor Cyl. Rod End DWG 55-435 & 55-436

ROD END, FEMALE 7/16" NF 02-157 2 Major Cyl. Rod End 55-442, 55-443, 55-553 & 55-554

THREAD SEALANT 243, 10 ML 03-276 1 Fastener thread locking AIR LUBRICANT 04-011 1 Air lubricator refill

FLOOR SWITCH, L.H., BEL 505/507XL, ASSEMBLY 55-324 1 DWG 55-408

FLOOR SWITCH, R.H., BEL 505/507XL, ASSEMBLY 55-325 1 DWG 55-409




PLEASE NOTE: The following drawings are a reference guide for standard machine construction. We strive to provide up-to-date manuals with machines but we are continually improving our products and the details in the manual provided might not exactly match the machine at the time it is shipped. Many machines are modified in response to customer requests or as required by the case samples supplied at the time the machine is built and the manual may not provide a complete reference to the changes or modifications. PLEASE PROVIDE YOUR MACHINE SERIAL NUMBER(S) AT THE TIME OF A PARTS ORDER TO ENSURE THAT WE SUPPLY YOU WITH REPLACEMENT PARTS THAT MATCH YOUR MACHINE.

MACHINE LAYOUT DRAWING 75-221-03

ASSEMBLY & PARTS DRAWINGS:

Model 505XL Packing Station (8.3” width) 55-478-02

Model 505XL Packing Station (10” width) 56-781-01

COMMON ASSEMBLIES

Frame Assembly, 505XL 55-477-02

Fixed Folder Tower Assy., 505XL/507XL 55-436-04

Sliding Folder Tower Assy., 505XL/507XL 55-435-03

RH Flap Opener Assembly, 505XL/507XL 55-437-03

Floor Switch Control Lever R.H. 55-409-04

LH Flap Opener Assembly, 505XL/507XL 55-438-04

Floor Switch Control Lever L.H. 55-408-04

Body Switch, 505XL/507XL 55-412-03

Start/Stop Switch, 505 XL 55-506-02

F.R.L. Assembly, 505XK 55-509-05

Main Control Panel, 505XL 55-507-03

CUSTOM ASSEMBLIES

RH Side Frame Assembly, 505XL/507XL (8.3” width) 55-442-03

RH Major Flap Folder Assy., 505XL/507XL 55-441-03

LH Side Frame Assembly, 505XL/507XL (8.3” width) 55-443-02

LH Major Flap Folder Assy., 505XL/507XL 55-440-03

RH Side Frame Assembly, 505XL/507XL (10” width) 55-553-02

RH Major Flap Folder Assy., 505XL/507XL 55-552-03

LH Side Frame Assembly, 505XL/507XL (10” width) 55-554-02

LH Major Flap Folder Assy., 505XL/507XL 55-551-03

CONTROL DIAGRAMS:

Pneumatic Control Circuit Diagram 60-103-02 Bold indicates updates

5

4

1

6

6

11

8

12

10

2

3

7

9

LABEL D)

LABEL C)

LABEL G)

LABEL E)

LABEL A)

LABEL B)

LABEL A)

LABEL F)LABEL F)

BACK SIDE

LABEL E)

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-477 01 FRAME MAIN, ASSY, 505XL 12 B 55-436 03 FIXED TOWER VER.02 ASSY. 13 B 55-435 02 SLIDE FOLDER TOWER, V.02 14 B 55-442 03 FRAME ASSY, RH ,8" WIDTH 15 B 55-443 02 FRAME ASSY LH, 8" WIDTH 16 B 26-893 02 SIDE COVER PANEL FAB. 27 B 27-031 01 STOPPER BLOCK 18 B 27-028 01 MT PLATE, MAJOR FOLDER VALVE 19 B 55-506 02 EMERG. SWITCH ASSY.505XL 1

10 B 55-509 05 F.R.L. ASSY, 505/505XL 111 B 55-479 01 ROLLER EXTENSION, LH ASSY 112 B 55-482 01 ROLLER EXTENSION RH, ASSY 1

505XL99-05-12

P.T

-02 05-01-07RE-LOCATED MT LOCATION P/No. 55/506 PT

PACK STATION, GEN ASSYB 55-478

BEL 505XL, L -> R, 8" W

02DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

NOTE:

1) LABELS LOCATIONS: A) CATION: ADJUST FOLDING ROLLER PLATE FOR CASE WIDTH TO AVOID INTERFENCE B) WARNING LABEL: KEEP CLEAR MACHINE OPERATES AUTOMATICALLY C) CATION: ADJUSTING, SERVICING LABEL D) 'RESET SWITCH' LABEL E) 'WIDER ---->' LABEL F) RULER FROM 8" TO 24" G) RULER FROM 10" TO 35"2) RENOVE P/No. 55-479 AND 55-482 FOR CASE SIZE NARROWER THAN 11" IN WIDTH

NOTES:

LABELS CONTENT AND LOCATION:

A) CAUTION: ADJUST FOLDING ROLLER PLATE FOR CASE WIDTH TO AVOID INTERFERENCEB) WARNING: KEEP CLEAR MACHINE OPERATES AUTOMATICALLYC) CAUTION: ADJUSTING. SERVING LABELD) "RESET SWITCH"E) "WIDER ---->"F) RULLER FROM 10" TO 24"G) RULLER FROM 10" TO 35"

505XL06-01-23

SEE PART LIST

P.T

-

B 56-781PACK STATION, ASSYBEL 505XL, L -> R, 10"

01

SIZE:


REVISIONS


MATERIAL:

FINISH: COLOR: REV.


DWG.NO.

1(3D SOLID DRAWING)



DRAWN BY:MODEL:


REV.

1

3

47

6

75

2

8

9LABEL A)

LABEL F)

LABEL E)

LABEL E)

LABEL D)

LABEL B)

LABLE F)

LABEL G)

ON BACK SIDE

LABEL C)

LABEL B)

LABEL A)

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-477 01 FRAME MAIN, ASSY, 505XL 12 B 55-435 02 SLIDE FOLDER TOWER, V.02 13 B 55-436 03 FIXED TOWER VER.02 ASSY. 14 B 55-553 02 FRAME ASSY, RH ,10" WIDTH 15 B 55-554 02 FRAME ASSY, LH, 10"WIDTH 16 B 27-031 01 STOPPER BLOCK 17 B 26-893 02 SIDE COVER PANEL FAB. 28 B 55-506 02 EMERG. SWITCH ASSY.505XL 19 B 55-509 05 F.R.L. ASSY, 505/505XL 1

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:




DATE

COLOR:

CODE:

SIZE:

FINISH:


REV.

Z 55-477GENERAL ASSEMBLY

FRAME MAIN, ASSY, 505XL

02505 XL P.T

PRV99-05-12

PS03-910,03-189, 03-194 REPLACED 03-187,03-192,03-05702 07-03-13 PRV

22

18

9

8

7

6

5

5

11

10

11

4

4

17

1416 13

1419 131415

13

1415

13

20

1415 13

10

2

1

3

2

2

21

A

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-434 02 MAIN FRAME, 505XL/507XL 12 B 26-767 01 45° ANGLE SLIDE GUIDING 83 B 26-776 03 45° ANGLE GUIDING PLATE 84 B 27-076 01 COVER PLUG 45 B 56-108 01 CENTER SCREW SUB-ASSY 26 B 27-074 SPACER PLATE, 3 1/8X1 1/2 47 B 27-072 01 SUPPORT PLATE, BOT. 48 B 55-462 02 AIR COMPRESSOR TANK V.02 19 B 27-075 02 SPACER, 1 ODx 11/32 x 1 L 2

10 B 40-513 01 CASTER HEX NUT MT PLATE 411 B 55-699 03 LEG EXT, CASTER,12"SS SCR 412 B 03-159 HSHCS 5/16 C X 1 1/4 S 1613 B 03-187 WASHER, FLAT, WFL 5/16 5014 B 03-192 WASHER, LOCK 5/16 5015 B 03-055 HHCS 5/16 C x 1 S 3216 Z 03-057 HHCS 5/16"DIA. X 1 1/2" 1617 B 02-201 CHAIN ROLLER, #35 118 B 04-020 HANDLE, CRANK, 5" 119 B 03-058 SCREW, HHCS, Ø5/16 X 1 3/4 LG 220 Z 03-910 HSHCS 7/16 NC X 1 S 821 B 03-189 WASHER, FLAT, 7/16 822 B 03-194 WASHER, LOCK, WL, 7/16 8

32

DETAIL A SCALE 1 : 8

1011

5

12

1

25

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

PS

ASSY UPDATED

4x 03-137, 03-134 & 03-156 REMOVED, 4x 03-124 ADDED

03

04 06-03-07

04-09-27 P.S

PRV

B 55-436TILTED FRAME

FIXED TOWER VER.02 ASSY.

04

SEE PART LIST

P.T/PS505XL/507XL99-03-19

(PREVIOUSLY SE63-220)

6 9/32"

2 13/32" 4 1/2"

13 3/16"

24

117

8

14

14

11

110

25

27

275

2514

3

9

18

27

4

27

30

6

20

79

13

12

28

29

311615

21 242322

3223

171615

262322

2332

2

222623

3335

3634

19

22

23

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 26-921 04 TOP COVER PLATE VER.01 ALUM FLAT BAR 12 B 26-906 05 COVER PLATE, FRONT, VER.02 SS304, 12GA, #4FIN, 4' X8' 13 B 26-907 06 COVER PLATE, BACK, VER.02, SS304, 12GA, #4FIN, 4' X8' 14 B 26-908 03 SLIDING BLOCK, RH., UHMW, SHEET 1" THICK 15 B 26-909 03 SLIDING BLOCK, LH., UHMW, SHEET 1" THICK 16 B 26-798 01 AIR CYLINDER MNT PLATE ALUM 17 B 26-799 03 KICKER FINGER CENTER ROD SS303 RB <MOD-DIA>1/2 28 B 26-857 02 KICKER FINGER SUPPORT PU70A 19 B 26-838 01 KICKER, FINGER SPACER UHMW R.B. 1 1/4 2

10 B 55-431 01 KICKER FINGER, ASSY. SEE PART LIST 111 B 02-320 SNAP RING, EXT Ø1/2, #R3100-50 SS 212 B 56-112 01 AIR CYLINDER, PIVOT MOUNT SEE PART LIST 113 B 02-153 ROD END FEMALE 5/16" NF 114 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED STEEL, PLATED 815 B 03-025 WASHER, FLAT, WFL 3/8 SS 216 B 03-193 LOCK WASHER, WL 3/8 SS 217 B 03-160 HSHCS 5/16 C X 1 1/2 S SS 118 B 27-887 01 ROD, KICKER EXT. SS303, ROUND BAR 119 B 27-888 01 PLATE, SPACER, ROLER VALVE ALUM, FLAT BAR 120 B 56-111 01 AIR VALVE, LIMIT, ROLLER-LEVER SEE PART LIST 121 B 03-082 NUT,HEX 1/4 C S SS 422 B 03-137 WFL 1/4 B R 0.063 SS 1023 B 03-134 WL-1/4 SS SS 1224 B 03-389 HHCS 1/4 C X 5/8 S SS 625 B 03-166 HSFHCS 1/4 C X 3/4 S SS 426 B 03-051 HEX HEAD CAP SCREW, Ø1/4" X 2" SS 427 B 03-124 HSHCS 1/4 C X 1 1/4 S SS 428 B 03-004 HSSB 1/4 C X 5/8 A ALLOY 129 B 26-841 02 LOCKING PLATE CRS FLAT BAR 130 B 26-866 02 LOCKING PLATE ALUM, FLAT BAR 131 B 03-254 HEX HEAD CAP SCREW, 3/8"DIA. X 4" SS 132 B 03-206 HSBHCS, Ø1/4 X 5/8 LG SS 233 B 03-185 WASHER, FLAT #6 SS 234 B 03-223 WASHER, LOCK, #6 SS 235 B 03-219 PHPMS 6-32-C X 1.25 LG SS 236 B 03-079 NUT, HEX, 6-32 SS SS 2

8

1

18

25

25

2427

265

22

21

2

11

15

16

2930

33

31

16

32

28

29

11

104

9

8

8

7

232

4

172018

171918

14 13 12

3

191817

19

17

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 26-907 06 COVER PLATE, BACK, VER.02, SS304, 12GA, #4FIN, 4' X8' 12 B 26-838 01 KICKER, FINGER SPACER UHMW R.B. 1 1/4 23 B 55-431 01 KICKER FINGER, ASSY. SEE PART LIST 14 B 26-799 03 KICKER FINGER CENTER ROD SS303 RB <MOD-DIA>1/2 25 B 26-921 04 TOP COVER PLATE VER.01 ALUM FLAT BAR 16 B 26-798 01 AIR CYLINDER MNT PLATE ALUM 17 B 02-153 ROD END FEMALE 5/16" NF 18 B 56-112 01 AIR CYLINDER, PIVOT MOUNT SEE PART LIST 19 B 26-890 01 LOCKING ROD EXTENSION V.02 SS303 RB 1/2 1

10 B 26-857 02 KICKER FINGER SUPPORT PU70A 111 B 02-320 SNAP RING, EXT Ø1/2, #R3100-50 SS 212 B 03-025 WASHER, FLAT, WFL 3/8 SS 113 B 03-193 LOCK WASHER, WL 3/8 SS 114 B 03-061 HHCS 3/8C X 1 S SS 115 B 03-004 HSSB 1/4 C X 5/8 A ALLOY 116 B 03-082 NUT,HEX 1/4 C S SS 417 B 03-137 WFL 1/4 B R 0.063 SS 818 B 03-134 WL-1/4 SS SS 819 B 03-047 HHCS 1/4 C X 3/4 S SS 620 B 03-048 HHCS 1/4 C X 1 S 221 B 26-906 05 COVER PLATE, FRONT, VER.02 SS304, 12GA, #4FIN, 4' X8' 122 B 03-166 HSFHCS 1/4 C X 3/4 S SS 223 B 03-127 HSFHCS 1/4-20NCx5/8 SS 224 B 26-922 03 TOP GUIDING PLATE, VER.02 SS304 10GA, #4FIN, 4' X 10' 125 B 03-130 HSFHCS #10 x 1/2 SS 426 B 03-041 THICK WASHER 5/16 SS 127 B 04-016 HANDLE ADJUST, 5/16 X 0.78 STEEL 128 B 26-908 03 SLIDING BLOCK, RH., UHMW, SHEET 1" THICK 129 B 03-124 HSHCS 1/4 C X 1 1/4 S SS 430 B 26-909 03 SLIDING BLOCK, LH., UHMW, SHEET 1" THICK 131 B 26-839 02 3/8"NC LOCKING THREAD ROD SS304, REDI ROD 3/8" NC 132 B 03-095 NUT, NYLOCK, 3/8-16 NC SS 133 B 26-841 02 LOCKING PLATE CRS FLAT BAR 1

APPROVEDDESCRIPTION

REVISIONS


DWG.NO. REV.


CODE:

APPROVED BY:


DATE(Y-M-D):

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

04-10-19 PS

PS

ASSEMBLY UPDATED

4X 03-124 REPLACED 03-156

02

03 06-03-07 PRV

B 55-435TITLED FRAME, ASSY

SLIDE FOLDER TOWER, V.02

03BEL 5057XL

99-03-18

SEE PARTS' LIST

PT/PSPRV


4 13/32"2 13/32"

23 9/16"

12 7/8"

4 1/4"

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 26-772 01 SLIDE BEAM ALUM 12 B 26-891 02 FLOOR PLATE RH., VER.02 SS304, 11GA #4FIN 4'X8', SEE 13 B 25-944 02 SPACER, CAM FOLLOWER SS303 RB 5/8 44 B 26-781 02 FLAP DETANGLE FINGER ALUM, SQ BAR 35 B 26-860 01 FLAP DETANGLE DELRIN, SHEET 3/4" THK 16 B 26-858 01 SIDE KICKER EXTENSION SS304, ROUND BAR Ø3/8" 17 26-859 02 FLAP DETANGLE ALUM, FLAT BAR 18 B 56-110 ROTARY VANE ACTUATOR, LH SEE PARTS' LIST 19 B 55-408 FLOOR SWITCH, RH, 505XL SEE PARTS' LIST 110 B 03-187 WASHER, FLAT, WFL 5/16 SS 611 B 03-192 WASHER, LOCK 5/16 SS 812 B 03-054 HHCS 5/16 C x 3/4 S SS 313 B 03-129 SCREW, HSFHCS 1/4-20x1/2 SS 614 B 03-186 WASHER, FLAT #10 SS 215 B 03-135 LOCK WASHER, #10 SS 216 B 03-152 HEX SOCK. CAP SCREW #10 X 1 1/4" SS 217 B 03-055 HHCS 5/16 C x 1 S SS 318 B 03-210 HSHCS 5/16 C X 1 S SS 219 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 SS 4

119

19

3

17

1

4

13

5

67

83 10

19

2

13

121011

161514 17

1110

1811

4

4

DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

03 04-11-15ASSY UPDATED PS FLAP, DETANGLE, RH, V.02

55-437GEN. ASSY, BEL 505XL/507XL

B 0399-03-19

SEE PARTS' LIST

PT/PSPRV

BEL 505XL/507XL


55-409

FLOOR SWITCH, RH., ASSY.TILT FRAME, 507XL

B 04APPROVEDDESCRIPTION

REVISIONS


DWG.NO. REV.


CODE:

APPROVED BY:


DATE(Y-M-D):

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

P/No. 41-110 WAS 40-14204 03-06-18 PT505XL/507XL

98-08-25

SEE PART LIST

P.T

-

PREVIOUSLY SE63-175

4

1

4

2

3

3

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-937 03 VALVE ASSY, R.H. FLOOR SWITCH 12 B 41-110 02 CONTROL LEVER, LH, AIR VALVE 13 B 03-083 NUT,HEX 5/16 C S 24 B 03-275 WLEXT - DIA. 5/16", SS 2

55-438

FLAP, DETANGLE, LH, V.02BEL 505XL/507XL

B 04

04-11-10UPDATED WITH 03-12404 PS

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

SEE PARTS' LIST

PT/PSPRV

BEL 505XL/507XL99-03-19


ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 26-772 01 SLIDE BEAM ALUM 12 B 26-892 04 FLOOR PLATE, LH.,, VER.02 SS304, 11GA #4FIN 4'X8' 13 B 26-781 02 FLAP DETANGLE FINGER ALUM, SQ BAR 34 B 26-860 01 FLAP DETANGLE DELRIN, SHEET 3/4" THK 15 B 26-858 01 SIDE KICKER EXTENSION SS304, ROUND BAR Ø3/8" 16 26-859 02 FLAP DETANGLE ALUM, FLAT BAR 17 B 56-192 ROTARY VANE ACTUATOR, RH SEE PARTS' LIST 18 B 55-409 FLOOR SWITCH, LH, 505XL SEE PARTS' LIST 19 B 03-187 WASHER, FLAT, WFL 5/16 SS 610 B 03-192 WASHER, LOCK 5/16 SS 811 B 03-054 HHCS 5/16 C x 3/4 S SS 312 B 03-129 SCREW, HSFHCS 1/4-20x1/2 SS 613 B 03-186 WASHER, FLAT #10 SS 214 B 03-135 LOCK WASHER, #10 SS 215 B 03-152 HEX SOCK. CAP SCREW #10 X 1 1/4" SS 216 B 03-055 HHCS 5/16 C x 1 S SS 317 B 03-210 HSHCS 5/16 C X 1 S SS 218 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 SS 419 B 02-150 CAM FOLLOWER YOLK TYPE, 3/4" DIA. 4

1819

10

1

12

12

1819

3

4

3

5

7

8

119

10

15 14 13

16 10 9

63

17

FLOOR SWITCH, LH. ASSY.

55-408TILT FRAME, 507XL

B 04DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

04 03-06-18P/No. 41-109 WAS 40-077 PT

98-08-25

SEE PART LIST

P.T505XL/507XL

-

PREVIOUSLY SE63-176

2

4

3

4

1

3

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-963 01 VALVE ASSY, L.H. FLOOR SWITCH 12 B 41-109 02 CONTROL LEVER, RH, AIR VALVE 13 B 03-083 NUT,HEX 5/16 C S 24 B 03-275 WLEXT - DIA. 5/16", SS 2

PREVIOUSLY: SE 63-171

NOTES:

FOR RH INFEED, SEE 56-490

1

8

5

46

9 3

13

2

121110

7

ITEM PART No. REV DESCRIPTION QTY.1 B 26-863 02 PLATE, BODY SWITCH MNT 12 B 26-870 02 LEVER, BODY SWITCH 13 B 25-925 02 ROLLER, BODY SWITCH, 505- 14 B 00-116 VALVE, 4WAY, MAN/SPRING 15 B 00-701 CONNECTOR, MALE, 1/4 OD X 1/8 NPT 26 B 00-711 1/8" NPT 90° CONNECTOR 17 B 03-259 BALL PLUNGER Ø5/16 X 1/2" 18 B 03-034 STP-1/8"DIA X 1",MS 19 B 03-014 HEX SOCKET SHOULDER BOLT, 3/8"DIA. X 5/8" 110 B 03-185 WASHER, FLAT #6 211 B 03-223 WASHER, LOCK, #6 212 B 03-077 SHRMS-6/32DIA x 1 A, ROUND SLOT M/S 213 B 03-300 HEX SOCKET SHOULDER SCREW, 5/16"DIA. X 5/8" 1

BODY SWITCH, LH INFEEDTITL FRAME, 507XL

B 55-412 03P.T505/507XL

98-08-05


DWG.NO. REV.

MODEL: DRAWN BY:




COLOR:FINISH:

MATERIAL:

SIZE:


REVISIONS

REV.

REVISED DWG

REPLACED 00-707 BY 00-711

02

03 01-10-02

98-10-27

2"

5"

1

3 1/2"

3

2

3

ITEM PART No. REV DESCRIPTION QTY.1 B 27-069 02 EMERG SWITCH MT CHANNEL 12 B 00-114 AIR VALVE, 3 WAY, 1/8 NPT 13 B 00-711 1/8" NPT 90° CONNECTOR 2

EMERG. SWITCH ASSY.505XLPACKING STATION

B 55-506 02P.T505XL/507XL

99-06-07


DWG.NO. REV.

MODEL: DRAWN BY:




COLOR:FINISH:

MATERIAL:

SIZE:


REVISIONS

REV.

REPLACED 00-707 BY 00-71102 01-10-02

4

3

1

2

6

5

7

ITEM PART NO. REV. DESCRIPTION MAT. QTY. 1 B 00-209 FRL, SYSTEM, 1/4 NPT 12 B 00-221 GAUGE, PRESSURE, 160 PSI 13 B 00-541 ELBOW, 90° FORGED STREET, 1/4" DIA 14 B 00-708 ELBOW MALE 1/4" OD TUBE X 1/4 NPT 15 B 00-544 ELBOW 45 DEGREE EXTRUDED STREET, 1/4 DIA. 16 B 00-761 QUICK COUPLING PLUG 1/4" mpt 17 B 00-210 MANUAL VALVE, 3 WAY, 1

NOTE:1) DO NOT MOUNT PRESSURE GAUGE ON BEFORE FINAL ASSEMBLY2) FOR RH SEE 56-5013) 00-221 IS PART OF 00-2094) 00-708 CAN BE 00-712.

SIZE:


REVISIONS


MATERIAL:

FINISH: COLOR: REV.


DWG.NO.

1(3D SOLID DRAWING)



DRAWN BY:MODEL:


REV.

PRV505/507 XL

99-06-08PT/PS

SEE PARTS' LIST

00-541 & 00-210 ADDED

27-077 REMOVED

04

05 04-09-13

04-08-11 PS

PS

B 55-509PACKING STATION

F.R.L. ASSY, 505/505XL

05

99-06-08PT/PS

PRV505/507 XL

SEE PARTS' LIST

B 55-507PACKING STATION 505 XL

MAIN CONTR. PANEL, LH, INFEED

03REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

04-08-11UPDATED WITH SURFACE RACEWAYS03 PS

1515

155

15

21

2"

24 1/2"

16 3/4"

6"

13/16"

2 1/4"3 1/4"3 3/4"

13"

8"

8"1 3/16"

2

10

15 5

20

5

17

15

418

19

2122 1 22

2312 4 418

5 517

8

2

12

15

13132216

12

11

5 6 5

3

7

4 410

2

2

1

9

2

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 27-070 03 CONTROL PANEL PLATE 12 B 00-743 UNION "Y" 1/4" TUBE 73 B 00-120 AIR VALVE, 4 WAY, 5 P0RT, AIR/SPRING 14 B 00-701 CONNECTOR, MALE,1/4 ODx1/8 NPT 55 B 00-631 MUFFLER,1/8"NPT,5O5 76 B 00-751 CONNECT, 1/4"OD x 1/8 NPT11MM HEX, .47" 17 B 00-746 MALE ELBOW, 1/4" TUBE X 1/8" NPT 18 B 00-744 CROSS A,1/4" TUBE,PISCO 19 B 01-620 01 SURFACE RACEWAY 1.5 X .75 X 13 1

10 B 01-620 01 SURFACE RACEWAY 1.5 X .75 X 8 211 B 01-622 01 SURFACE RACEWAY .75 X .4 X 2 112 B 00-753 FEMALE ELBOW- 1/4 TUBE TO 313 B 00-626 CONNECTOR 1/4"OD X #10-32 214 B 00-133 AIR VALVE, THRESHOLD SENSOR, 1/8" NPT 115 B 00-711 1/8" NPT 90° CONNECTOR 716 B 00-200 FLOW CONTROL, 1/8 NPT, 1/4 TUBE 117 B 00-633 ADAPTER, 1/8 X 1/8 218 B 00-132 AIR VALVE , 4 WAY, 5 PORTS, 219 B 00-748 MALE RUN TEE, 1/4" TUBE 120 B 00-747 MALE BRANCH TEE 221 B 00-126 SWITCH VALVE 122 B 00-121 VALVE, PULSE, ONE-SHOT 223 B 00-724 CONNECTOR, FEMALE 1/4 OD X 1/8 NPT 1

NOTES;60-103 PNEUMATIC CIRCUIT SCHEMATICS56-488 RH INFEED

505 XL/507 XL99-03-25

PT/PS

(PREVIOUSLY SE63-250)FRAME ASSY, RH ,8" WIDTH

55-442LH INFEED, PACK STATION

B 03DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

03 04-08-16UPDATED PS

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 26-765 02 AIR CYL MT FRONT, RH,V.1 12 B 26-864 01 TOP ALIGNMENT BLOCK, VER.02 23 B 40-466 02 LOWER CYL MNT PLATE, RH 14 B 27-026 03 BOTTOM MNT PLATE VER.02 15 B 26-834 03 AIR CYL MT FRONT, LH,V.1 16 B 40-465 02 LOWER CYL MNT PLATE, LH 17 B 55-437 03 FLAP, DETANGLE, RH, V.02 18 B 55-441 03 R.H. MAJOR FLAP FOLDER V.02 19 B 55-427 02 LH, MAJOR FLAP FOLDER 1

10 B 55-428 02 RH, MAJOR FLAP FOLDER 111 B 03-020 HSSB 1/2 C X 1 1/4 A 212 B 40-480 01 MAJOR FOLDER MT. RH. WELDED 113 B 26-894 03 SIDE BOX SUPPORT 114 B 55-413 02 R.H. COMPRESSION ROLLER 115 B 26-844 05 L.H. UPPER ROLLER 116 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 417 B 00-012 01 AIR CYLINDER Ø1 1/4 X 3" PIVOT 218 B 26-141 04 CAP WASHER SPROCKET, 219 B 27-071 01 PANEL MNT PLATE, BOT. 120 B 55-412 03 BODY SWITCH, LH INFEED 121 B 55-507 03 MAIN CONTR. PANEL, LH, INFEED 122 B 02-157 ROD END, 7/16 UNF 223 B 03-187 WASHER, FLAT, WFL 5/16 424 B 03-192 WASHER, LOCK 5/16 825 B 03-056 HHCS 5/16-18x1 1/4 426 B 03-057 HHCS 5/16"DIA. X 1 1/2" 427 B 03-025 WASHER, FLAT, WFL 3/8 228 B 03-193 LOCK WASHER, WL 3/8 229 B 03-065 HHCS 3/8 C X 2 S 230 B 03-084 NUT, HEX 3/8-16 231 B 03-007 HSSB-5/16NC X 1 MS 232 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 633 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 834 B 03-137 WASHER, FLAT 1/4 x 1/16 1335 B 03-134 WASHER, LOCK, 1/4 1536 B 03-048 HHCS 1/4 C X 1 S 837 B 03-130 HSFHCS #10 x 1/2 438 B 03-166 SCREW,HSFHCS 1/4-20x3/4 239 B 03-052 HHCS 1/4 C X 2 1/2 S 240 B 03-047 HHCS 1/4 C X 3/4 S 241 B 03-046 HHCS 1/4 C X 1/2 S 3

25

2

37

32

13

3737

12

14

2524

232624

2

11

10

12426

2324

32

37

32

49

11 3

31363534

343536

20

21

19

344135

413534

29

7

22

18

8

3333

272830

343635

353436 31

6

343540

18

17

22

3935

16 3815

5

3027 28

29

32

32

1

9

14

6

10

3

5

16

107 13

8

1

15

9

6

5

3

2

12 11

1112

2

4

4

13

14

9

FOR RETROFITWITH A NEW 00-012 CYLINDERUSE AL. SPACER 1/6X1X5BETWEEN #27-886 & 55-439

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-439 02 ROTATE BAR, V.02 , ASSY 12 B 02-105 BEARING, 3/4"ID SPHERICAL 23 B 25-172 04 BEARING HOUSING, 24 B 26-775 01 MAJOR FLAP FOLDER 25 B 26-787 04 MAJOR HOLDER 26 B 27-886 02 LEVER BAR, CYL. 27 B 26-869 06 BOX SUPPORT BLOCK 18 B 27-038 02 MAJOR FLAP FOLDER 19 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 10

10 B 03-124 HSHCS 1/4 C X 1 1/4 S 611 B 03-134 WL-1/4 SS 1012 B 03-048 HHCS 1/4 C X 1 S 1013 B 26-786 02 T-NUT 214 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 215 B 03-172 HSFHCS 5/16 C X 1 S 416 B 03-231 HSFHCS 3/8 C x 3/4 S 2

B 55-441ASSY, 8" CASE WIDTH

R.H. MAJOR FLAP FOLDER V.02

03

SEE PARTS' LIST

PT/PSPRV

505XL/507XL98-08-06


REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

04-09-22RETROFIT NOTE ADDED, UPDATED WITH 27-886-0203 PS

55-443

FRAME ASSY LH, 8" WIDTHLH INFEED, PACK STATION

B 02

SEE PART LIST

P.T505/507XL99-03-25

PREVIOUSLY SE63-251

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

02 ADD P/No. 26-141 01-05-25

29

1132

17

16

22

3028


2

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 26-834 03 AIR CYL MT FRONT, LH,V.1 12 B 26-765 02 AIR CYL MT FRONT, RH,V.1 13 B 40-481 01 MAJOR FOLDER MT. LH. WELDED 14 B 55-440 03 MAJOR FOLDER, LH, 8"WIDTH 15 B 55-428 02 RH, MAJOR FLAP FOLDER 16 B 55-419 02 L.H. COMPRESSION ROLLER 17 B 40-466 02 LOWER CYL MNT PLATE, RH 18 B 40-465 02 LOWER CYL MNT PLATE, LH 19 B 55-438 04 FLAP, DETANGLE, LH, V.02 1

10 B 55-427 02 LH, MAJOR FLAP FOLDER 111 B 26-141 04 CAP WASHER SPROCKET, 212 B 26-842 05 R.H. UPPER ROLLER 113 B 26-864 01 TOP ALIGNMENT BLOCK, VER.02 214 B 26-894 03 SIDE BOX SUPPORT 115 B 27-026 03 BOTTOM MNT PLATE VER.02 116 B 00-012 01 AIR CYLINDER Ø1 1/4 X 3" PIVOT 217 B 02-157 ROD END, 7/16 UNF 218 B 03-187 WASHER, FLAT, WFL 5/16 419 B 03-192 WASHER, LOCK 5/16 820 B 03-056 HHCS 5/16-18x1 1/4 421 B 03-057 HHCS 5/16"DIA. X 1 1/2" 422 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 823 B 03-130 HSFHCS #10 x 1/2 424 B 03-137 WASHER, FLAT 1/4 x 1/16 625 B 03-134 WASHER, LOCK, 1/4 826 B 03-048 HHCS 1/4 C X 1 S 627 B 03-007 HSSB-5/16NC X 1 MS 228 B 03-025 WASHER, FLAT, WFL 3/8 229 B 03-193 LOCK WASHER, WL 3/8 230 B 03-084 NUT, HEX 3/8-16 231 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 632 B 03-065 HHCS 3/8 C X 2 S 233 B 03-166 SCREW,HSFHCS 1/4-20x3/4 234 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 435 B 03-052 HHCS 1/4 C X 2 1/2 S 236 B 03-020 HSSB 1/2 C X 1 1/4 A

A

18

3

1423

2

10

36

13

31

15

9

416

31

7

827

1

536

13

22

6

12

33 22

31

312119

2018

342535

26 25 24

262524

2119

2019

23

COLOR:FINISH:

MATERIAL:

SIZE:


1(3D SOLID DRAWING)

DIMENSIONS ARE IN INCHES BELCOR INDUSTRIESDO NOT SCALE DRAWINGTHIRD ANGLE PROJECTION

REVISIONS APPROVED BY:DATE(Y-M-D):

DRAWN BY:MODEL:

REV.DWG.NO.

TITLE


REV.VER.02, ASSY

B 55-440

MAJOR FOLDER, LH, 8"WIDTH

0399-03-23PT505XL/507XL

SEE PART LIST

02

03 05-10-25

00-08-10ECO No. 00-388

REVISED P/No. 27-038, REMOVED P/No. 03-266 PT

8

19 7

46 61/64"

3"

.875

6

10

12 11

114

5

16310

47

3

516

6

10

14

4

13

8

15

15

9

13

2

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-439 02 ROTATE BAR, V.02 , ASSY 12 B 02-105 BEARING, 3/4"ID SPHERICAL 23 B 25-172 04 BEARING HOUSING, 24 B 26-775 01 MAJOR FLAP FOLDER 25 B 26-787 04 MAJOR HOLDER 26 B 27-886 02 LEVER BAR, CYL. 27 B 26-869 06 BOX SUPPORT BLOCK 18 B 27-038 02 MAJOR FLAP FOLDER 19 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 10

10 B 03-124 HSHCS 1/4 C X 1 1/4 S 611 B 03-134 WL-1/4 SS 1012 B 03-049 HHCS 1/4 C X 1 1/4 S 1013 B 26-786 02 T-NUT 214 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 215 B 03-172 HSFHCS 5/16 C X 1 S 416 B 03-231 HSFHCS 3/8 C x 3/4 S 2

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 26-765 02 AIR CYL MT FRONT, RH,V.1 12 B 26-834 03 AIR CYL MT FRONT, LH,V.1 13 B 40-480 01 MAJOR FOLDER MT. RH. WELDED 14 B 55-552 03 MAJOR FLAP FOLDER RH, 10" W 15 B 55-437 03 FLAP, DETANGLE, RH, V.02 16 B 40-466 02 LOWER CYL MNT PLATE, RH 17 B 40-465 02 LOWER CYL MNT PLATE, LH 18 B 55-427 02 LH, MAJOR FLAP FOLDER 19 B 55-428 02 RH, MAJOR FLAP FOLDER 1

10 B 55-412 03 BODY SWITCH, LH INFEED 111 B 55-413 02 R.H. COMPRESSION ROLLER 112 B 55-507 03 MAIN CONTR. PANEL, LH, INFEED 113 B 26-141 04 CAP WASHER SPROCKET, 214 B 26-844 05 L.H. UPPER ROLLER 115 B 26-864 01 TOP ALIGNMENT BLOCK, VER.02 216 B 26-894 03 SIDE BOX SUPPORT 117 B 27-026 03 BOTTOM MNT PLATE VER.02 118 B 27-071 01 PANEL MNT PLATE, BOT. 119 B 00-012 01 AIR CYLINDER Ø1 1/4 X 3" PIVOT 220 B 02-157 ROD END, 7/16 UNF 221 B 03-020 HSSB 1/2 C X 1 1/4 A 222 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 423 B 03-187 WASHER, FLAT, WFL 5/16 424 B 03-192 WASHER, LOCK 5/16 825 B 03-056 HHCS 5/16-18x1 1/4 426 B 03-057 HHCS 5/16"DIA. X 1 1/2" 427 B 03-025 WASHER, FLAT, WFL 3/8 228 B 03-193 LOCK WASHER, WL 3/8 229 B 03-065 HHCS 3/8 C X 2 S 230 B 03-084 NUT, HEX 3/8-16 231 B 03-007 HSSB-5/16NC X 1 MS 232 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 633 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 834 B 03-137 WASHER, FLAT 1/4 x 1/16 1335 B 03-134 WASHER, LOCK, 1/4 1536 B 03-048 HHCS 1/4 C X 1 S 837 B 03-130 HSFHCS #10 x 1/2 438 B 03-166 SCREW,HSFHCS 1/4-20x3/4 239 B 03-052 HHCS 1/4 C X 2 1/2 S 240 B 03-047 HHCS 1/4 C X 3/4 S 241 B 03-046 HHCS 1/4 C X 1/2 S 3

20

37

37

16

3737

3

11

25242326

24

15

21

9

1

2426

2324

25

15

32

178

216

31363534

343536

10

12

18

344135

413534

29

5

32

13

4

33

33

2728

30

343635

353436 31

7

343540

13

19

20

3935

22 3814 2

3027 28

29

32

3232

19

55-553

FRAME ASSY, RH ,10" WIDTHLH INFEED, PACK STATION

B 0299-08-25P.T505XL/507XL


REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

02 ADD PNo. 26-141 01-05-28

03

.875

46 61/64"

STANDARD, 507XL ASSY.B 55-552

MAJOR FLAP FOLDER RH, 10" W

03505XL/507XL

98-08-25P.T


DESCRIPTION

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:

DATE(Y-M-D):

APPROVEDBYDATE


APPROVED BY:

CODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1(3D SOLID DRAWING)


REV.

05-10-25

00-08-10ECO No. 00-388

REVISED P/No. 27-038, REMOVED P/No. 03-266

02

03 PT

7

8

1

10

6

11

17

53

2

1

15

15

2

35

17

1413

4

9

6

118

10

10

7

1616

12 13 14

121314

111314

16

12

9

4

16

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-439 02 ROTATE BAR, V.02 , ASSY 12 B 02-105 BEARING, 3/4"ID SPHERICAL 23 B 25-172 04 BEARING HOUSING, 24 B 26-775 01 MAJOR FLAP FOLDER 25 B 26-787 04 MAJOR HOLDER 26 B 27-886 02 LEVER BAR, CYL. 27 B 26-869 06 BOX SUPPORT BLOCK 18 B 27-038 02 MAJOR FLAP FOLDER 19 B 26-786 02 T-NUT 2

10 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 1811 B 03-124 HSHCS 1/4 C X 1 1/4 S 612 B 03-049 HHCS 1/4 C X 1 1/4 S 1813 B 03-134 WL-1/4 SS 2014 B 03-137 WFL 1/4 B R 0.063 2015 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 216 B 03-172 HSFHCS 5/16 C X 1 S 417 B 03-231 HSFHCS 3/8 C x 3/4 S 2

02

55-554

FRAME ASSY, LH, 10"WIDTHLH INFEED, PACK STATION

B 02

SEE PART LIST

P.T505/507XL99-03-25

PREVIOUSLY SE63-283

REVISIONS


DWG.NO. REV.

MODEL: DRAWN BY:



DATECODE:

SIZE:

MATERIAL:

FINISH: COLOR:

1


REV.

02 ADD P/No. 26-141 01-05-28

22 1132

17

16

29 3028


2

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 26-834 03 AIR CYL MT FRONT, LH,V.1 12 B 26-765 02 AIR CYL MT FRONT, RH,V.1 13 B 40-481 01 MAJOR FOLDER MT. LH. WELDED 14 B 55-551 03 MAJOR FLAP FOLDER LH, 10" W 15 B 55-428 02 RH, MAJOR FLAP FOLDER 16 B 55-419 02 L.H. COMPRESSION ROLLER 17 B 40-466 02 LOWER CYL MNT PLATE, RH 18 B 40-465 02 LOWER CYL MNT PLATE, LH 19 B 55-438 04 FLAP, DETANGLE, LH, V.02 110 B 55-427 02 LH, MAJOR FLAP FOLDER 111 B 26-141 04 CAP WASHER SPROCKET, 212 B 26-842 05 R.H. UPPER ROLLER 113 B 26-864 01 TOP ALIGNMENT BLOCK, VER.02 214 B 26-894 03 SIDE BOX SUPPORT 115 B 27-026 03 BOTTOM MNT PLATE VER.02 116 B 00-012 01 AIR CYLINDER Ø1 1/4 X 3" PIVOT 217 B 02-157 ROD END, 7/16 UNF 218 B 03-187 WASHER, FLAT, WFL 5/16 419 B 03-192 WASHER, LOCK 5/16 820 B 03-056 HHCS 5/16-18x1 1/4 421 B 03-057 HHCS 5/16"DIA. X 1 1/2" 422 B 03-124 SCREW, HSHCS 1/4-20x1 1/4 823 B 03-130 HSFHCS #10 x 1/2 424 B 03-137 WASHER, FLAT 1/4 x 1/16 625 B 03-134 WASHER, LOCK, 1/4 826 B 03-048 HHCS 1/4 C X 1 S 627 B 03-007 HSSB-5/16NC X 1 MS 228 B 03-025 WASHER, FLAT, WFL 3/8 229 B 03-193 LOCK WASHER, WL 3/8 230 B 03-084 NUT, HEX 3/8-16 231 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 632 B 03-065 HHCS 3/8 C X 2 S 233 B 03-166 SCREW,HSFHCS 1/4-20x3/4 234 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 435 B 03-052 HHCS 1/4 C X 2 1/2 S 236 B 03-020 HSSB 1/2 C X 1 1/4 A

A

18

3

1423

2

10

36

13

31

15

9

416

31

7

827

1

536

13

22

6

12

33 22

31

312119

2018

342535

26 25 24

262524

2119

2019

23

16

7

810

03

17

53

15

1

15

76

11

4 9

2

3

5

176

11

9

4

10 8 10

16

16

16

16

12 13 14

121314

111314

12 13 14

ITEM PART NO. REV. DESCRIPTION QTY. 1 B 55-439 02 ROTATE BAR, V.02 , ASSY 12 B 02-105 BEARING, 3/4"ID SPHERICAL 23 B 25-172 04 BEARING HOUSING, 24 B 26-775 01 MAJOR FLAP FOLDER 25 B 26-787 04 MAJOR HOLDER 26 B 27-886 02 LEVER BAR, CYL. 27 B 26-869 06 BOX SUPPORT BLOCK 18 B 27-038 02 MAJOR FLAP FOLDER 19 B 26-786 02 T-NUT 2

10 B 02-109 WHEEL, SKATE, 2" STEEL, ZINC PLATED 1811 B 03-124 HSHCS 1/4 C X 1 1/4 S 612 B 03-049 HHCS 1/4 C X 1 1/4 S 1813 B 03-134 WL-1/4 SS 2014 B 03-137 WFL 1/4 B R 0.063 2015 B 03-158 HSHCS 5/16-18 UNC x 3/4LG 216 B 03-172 HSFHCS 5/16 C X 1 S 417 B 03-231 HSFHCS 3/8 C x 3/4 S 2

02

.875

46 61/64"

MAJOR FLAP FOLDER LH, 10" WSTANDARD, 507XL ASSY.

B 55-551 03P.T505XL/507XL

98-08-25

(PREVIOUSLY SE63-280BELCOR INDUSTRIES

TITLE

DWG.NO. REV.

MODEL: DRAWN BY:




COLOR:FINISH:

MATERIAL:

SIZE:


REVISIONS

REV.

ECO No. 00-388

REVISED P/No. 27-038, REMOVED P/No. 03-266

02

03 05-10-25

00-08-10

PT

bel 505 / 505 ‘s’ - clute packaging · 11/14/08 technical reference 66-11-12 effective:...

Documents