bellwork name 3 different parts on a an oxy-acetylene rig
TRANSCRIPT
![Page 1: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/1.jpg)
Bellwork
• Name 3 different parts on a an oxy-acetylene rig
![Page 2: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/2.jpg)
Oxy-fuel Welding and Cutting
By: John Templeton
![Page 3: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/3.jpg)
Objectives
• Understand facts about oxygen and acetylene
• Explain functions of oxyacetylene heat
• List the procedures for assembly of the oxyacetylene rig
• Identify oxyacetylene equipment
![Page 4: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/4.jpg)
Objectives
• Discuss safety precautions for oxyacetylene process
• Describe the procedures for turning
on/off the oxyacetylene rig
![Page 5: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/5.jpg)
Terms and Definitions
• Penetration: Distance from the original surface of the base metal to that depth at which fusion stops.
Good or Bad Penetration?
![Page 6: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/6.jpg)
Terms and Definitions
• Backfire: A short pop of the torch flame followed by extinguishing of the flame or continued burning of the gases.
• Flashback: when the torch flame moves into or beyond the mixing chamber.
![Page 7: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/7.jpg)
Terms and Definitions
• Tack Weld: A short weld used to hold work pieces together
• Preheating: Heating prior to a welding or cutting operation
![Page 8: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/8.jpg)
Benefits of Learning Oxy-Acetylene welding and cutting
• Teaches methods used in forming and controlling a weld puddle
• Teaches methods of using welding equipment and techniques that are useful in other welding processes
![Page 9: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/9.jpg)
Benefits of Learning Oxy-Acetylene welding and cutting
• Provides practice leading to good hand-eye coordination
• FUN
![Page 10: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/10.jpg)
Equipment required
• Oxygen cylinder - filled with 2200 psi of pure compressed oxygen
• Acetylene cylinder – filled with 250 psi of compressed acetylene
• Pressure regulators- regulate the gas and oxygen pressure
![Page 11: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/11.jpg)
Equipment required
• Two hoses encased together– green hose = oxygen– red hose = acetylene
• Welding torch with tips
• Welding goggles and safety glasses– shade 4-6 for oxy-fuel welding and cutting –Z87 safety glasses
![Page 12: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/12.jpg)
Equipment required
• Striker- used to light initial flame
• Check valves- to prevent flashback
![Page 13: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/13.jpg)
Safety Rules for Oxy-Acetylene Workplace
• Keep work area free of grease, oil, and flammable materials
• Cool or quench hot metal and extinguish all sparks before leaving
![Page 14: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/14.jpg)
Safety Rules for Oxy-Acetylene Workplace
• Don’t leave torches, tips or hot metal where someone will pick them up
• Never carry matches or lighters into any work area
![Page 15: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/15.jpg)
Personal Protective Equipment (PPE)
• Shirts
–Keep collar and sleeves buttoned to keep out sparks and remove pockets or tape them shut
![Page 16: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/16.jpg)
PPE
• Pants
–no cuffs or tears and come over shoe tops
![Page 17: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/17.jpg)
PPE
• Shoes–leather, cover entire foot
• Gloves–Leather, never use to pick up
metal (must not have holes in the finger tips)
![Page 18: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/18.jpg)
PPE
• Safety Glasses
–worn under helmets and goggles (Z87)
![Page 19: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/19.jpg)
PPE
• Wear safety glasses at all times
• Wear welding goggles or a face shield with a lens no. 4-6
– when in doubt, start with a dark lens and then switch to a lighter one.
![Page 20: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/20.jpg)
Pressure Regulating Valves
• Each regulator has two gauges mounted on a single manifold, one indicates cylinder pressure and the other indicates working pressure for the torch
Cylinder Gauge Hose Gauge
![Page 21: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/21.jpg)
Pressure Regulating Valves
• Each regulator has an adjusting screw so pressure to the torch can be quickly controlled by turning the screw righty-tighty increases pressure, left-loosey decreases pressure
![Page 22: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/22.jpg)
Welding hoses
• Color
–Acetylene-red,
–Oxygen-green
![Page 23: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/23.jpg)
Welding hoses
• Connecting threads– acetylene connectors
have a V-groove and left handed threads and oxygen connectors have plain surfaces and right handed threads
![Page 24: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/24.jpg)
Parts of a welding torch
• Torch body is the part of the torch that is held like a pencil, it contains two needle valves to control flow of gas
• Welding head contains mixer, mixing throat, and the welding tip
![Page 25: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/25.jpg)
Basic Safety Rules
• 1. Before you start make sure personal safety is followed and PPE is worn
• 2. Make sure you have had instruction
• 3. Release adjusting screw on regulators before opening valves
![Page 26: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/26.jpg)
Basic Safety Rules
• 4. Stand on the opposite side of the regulator when opening a valve
• 5. Open cylinder valve slowly, oxygen first and then acetylene just a quarter of a turn
![Page 27: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/27.jpg)
Basic Safety Rules
• 6. Do not use or compress acetylene at pressure higher than 15 psi or oxygen at a pressure higher then 40 psi.
• 7. Set working pressures as desired.
• 8. Light acetylene first, shut it off first
![Page 28: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/28.jpg)
Basic Safety Rules
• 9. Never use oil on regulators or any oxy-fuel equipment
• 10. Do not use oxygen as a substitute for compressed air
• 11. Keep heat, flames and sparks away from combustibles.
![Page 29: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/29.jpg)
Basic Safety Rules
• 12. Keep hoses out of sparks or spatter to prevent leaks
• 13. To check for leaks use only soapy water
![Page 30: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/30.jpg)
Types of Flames
• Oxidizing– Excess oxygen
with no feather, makes hissing sound
![Page 31: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/31.jpg)
Types of Flames
• Neutral– burns equal amounts of oxygen and
acetylene and has a clear edged inner cone
– most commonly used
![Page 32: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/32.jpg)
Types of Flames
• Carburizing– Excess acetylene with an acetylene
feather two to three times the length of the inner cone
– Used some in hardsurfacing, adds carbon to metal
![Page 33: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/33.jpg)
Safely lighting a flame
• Check the torch valves to make sure they are closed
• Open the oxygen cylinder valve full open
![Page 34: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/34.jpg)
Safely lighting a flame
• Open the acetylene cylinder 1/3 turn
• Open the oxygen torch valve to get proper working pressure
![Page 35: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/35.jpg)
Safely lighting a flame
• Close oxygen torch valve
• Open the acetylene torch valve and set the proper working pressure
![Page 36: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/36.jpg)
Safely lighting a flame
• Close the torch valve
• Open the acetylene torch valve one and 1/2 of a turn
![Page 37: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/37.jpg)
Safely lighting a flame
• Point the torch away
• Crack acetylene valve
• Strike a spark to ignite
![Page 38: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/38.jpg)
Safely lighting a flame
• Open the valve until it jumps off the tip
• Close the valve slightly to bring the flame back to the tip
• Open the oxygen valve until a neutral flame is reached
![Page 39: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/39.jpg)
Guidelines for Flame adjustment
• To get a neutral flame, always start with more acetylene, then increase oxygen until the acetylene feather disappears from the center cone
• Excess oxygen causes molten metal to spark
![Page 40: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/40.jpg)
Guidelines for Flame adjustment
• Make sure regulators are set for the pressures recommended for the tip size
![Page 41: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/41.jpg)
Shutting down the unit
• Close the acetylene valve
• Close the oxygen valve
• Shut off the tanks
• Open the acetylene to purge the line and then the oxygen
![Page 42: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/42.jpg)
Shutting down the unit
• When both gauges read zero, close the valve
• Open the oxygen valve
![Page 43: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/43.jpg)
Shutting down the unit
• When both gauges read zero, close the valve
• Release pressure by turning adjusting screw left (out)
• Coil hoses and put tools away and properly store the unit
![Page 44: Bellwork Name 3 different parts on a an oxy-acetylene rig](https://reader030.vdocument.in/reader030/viewer/2022032703/56649f525503460f94c75d13/html5/thumbnails/44.jpg)
Review
• What are the parts of oxy-fuel equipment?
• What are three safety precautions used when oxy-fuel welding?
• How do you safely operate the oxy-fuel equipment?