belt plant mixing plant warehouses · 3805 morrow st. (800) 633-2284 guntersville, al 35976 fax:...

WarrantyAll merchandise is guaranteed against defective materials and workmanship for the life of the product.

Terms of SaleNet 30 days, or cash with order. No COD shipments.

PriceWill drop ship any product from any shipping point.

Price Rubber Corp.©Copyright 2011

Belts made to a minimum lengthmust be made slightly long. Thisoverage will be shipped, but invoicewill not exceed 2%.

Belt Plant (334) 277-54702733 Gunter Park Dr. W. (800) 633-1470Montgomery, AL 36109 Fax: (334) 271-3194Email: [email protected] Email:[email protected]: [email protected] Email: [email protected]

Email: [email protected] Plant (256) 582-3134

3805 Morrow St. (800) 633-2284Guntersville, AL 35976 Fax: (256) 582-0847Email: [email protected] Email: [email protected]

Warehouses901 E. Kennedale Pkwy (817) 572-0253Kennedale, TX 76060 (800) 821-0668

Fax: (817) 478-0360Email: [email protected] Email: [email protected]

2556 South 2570 West (801) 956-0077West Valley City, UT 84119 (888) 597-7423


Email: [email protected]

2953 Fleetbrook Dr. (901) 332-9360Memphis, TN 38116 (800) 331-9360


1

2

Rubbers Sp. GrButyl .92EPDM .86 Hypalon 1.10 Mineral 1.04 Natural .92 Neoprene 1.23 Nitrile 1.00 Polybutadiene .94Syn. Natural .92 SBR .94 Silicone .98 Thiokol 1.27

Fillers Sp. Gr.AI. Hydrate 2.42 Barytes 4.45 Ca. Carbonate 2.70 C. Black 1.80 Clays 2.60 Graphite 2.25 Kaolin 2.60 Lime 2.20 Mg. Carbonate 2.22 Mica 2.95 Soapstone 2.72 Talc 2.72 Titanium Di. 3.93

Processing Sp.Gr. Aids

Carnauba Wax .99 DOP Oil .98 Factice 1.06 Mineral Oil .84 Pine Oil .93 Tall Oil .98 Parafin Wax .90 Petrolatum .84 Pine Tar 1.08 Rosin 1.08

Vulcanizers Sp.Gr. Mg. Oxide 3.32 Sulfur 2.07 Zn Oxide 5.57

Miscellaneous Sp.Gr. Am. Bicarbonate 1.58 Asbestos 2.47 Coal Tar 1.18 Cork .80 Cotton Flock 1.25 Gelatin 1.27 Rubber Dust 1.20 Iron Oxide 5.14 Lead 11.34 Lignin 1.30 Mg. Carbonate 2.22 Castor Oil .96 Cotton Seed Oil .92 Palm Oil .88 Pumice 2.35 Shellac 1.10 Sodium

Bicarbonate 2.20 Stearic Acid .85 Urea 1.34 Whiting 2.62 Wood Flour 1.25 Zinc Stearate. 1.05

AirOperatedRam

Like a bakery, thousands ofrecipes are written aroundhundreds of ingredients, eachintended to contribute some-thing to the finished product. Rubber can be made soft orhard, flexible or rigid, elasticor tough, alive or dead-liquid, sponge, almost anycolor and resistant to sunlight,electrical current, sub-zerotemperature, heat, and manychemicals and oils. Rubber serves everywhere man goes!

DropDischargeDoor

MixingRotors

LoadingHopper

Price RubberCompounding

We supply many othermanufacturers with precise

compounds for their products3 Dependable quality3 Repeatabil i ty3 Prompt del ivery3 Reasonable cost

Guntersvi l le Mixing Plant(256) 582-3134(800) 633-2284

Fax: (256) 582-0847

3

Tensile is a measure of force required to break a material. In rubber, generally a dumbbell sample with a 1/4” x 1/4” cross section (neck) is broken and pounds per square inch are calculated.

Elongation is the “stretch” of a material at break, expressed as a percent of the relaxed original.

Modulus is a measure of force required to stretch a materiala particular amount. In rubber, generally a sample is stretched 300% and the necessary force (pounds per square inch) is calculated.

Durometer is a measure of hardness, measured with a plunger and read on a gauge. A rubber band might read 35, a tire tread about 60 and a shoe heel about 70 durometer.

Specific Gravity (mass) is weight, compared withan equal volume of water (taken as 1.0).

Belt CompoundsStk. Compound Ten. Elon. Mod. Duro. Sp.Gr.

16 400º Chlorobutyl 1900 650 950 65 1.14 20 Tan natural 2400 775 400 46 1.2221 PRC #1 SBR 3050 580 1500 64 1.1422 PRC #2 SBR 2400 640 1100 60 1.1423 300º F SBR 2700 580 1300 63 1.1424 PRC #2 MOR 2400 600 1100 62 1.1526 70 duro. SBR 2800 550 1100 70 1.1629 Hyflex abrasion 3000 630 1300 65 1.1431 Polar Bear - 80º F 2590 560 1300 63 1.1433 MSHA SBR 1800 540 1000 66 1.3834 MSHA flameout 1500 500 850 63 1.5435 MSHA Nitrile 2000 500 1100 65 1.3537 An./Veg. waste 2200 510 1100 62 1.1638 Alumina 3000 550 1300 65 1.1744 EPDM 350º F 1500 500 1100 65 1.1761 Nitrile 1600 500 1150 62 1.2596 Non-marking SBR 1200 400 500 55 1.3299 Hard SBR 1700 210 zero 80 1.17

RubberCarefully formulatedcompounds give maxi-mum service in theintended application.These recipes handlethe products conveyedby the belts shown inthe following pages.

14

We have no minimums on invoicing

or shipping . . . you get what you need

without penalty.

We slit, lace, punch, vulcanize, and

add cleats or V-guides at reasonable

cost. We couple all hoses.

We dropship to anywhere, using

standard forms, blank forms, or your

forms, as you instruct.

We manufacture most special

products in modest minimums at

regular prices.

There are no restocking fees when you

make a mistake. Standard goods in new

and saleable condition are fully credited.

Samples, catalogs and field help are

always available, no charge.

Pricing is for shipments from any

warehouse to any destination, any product

mix, in any quantity.

5

Allowable Working Tension

(AWT) @ 1⁄10 fabric breakAmerican Lab rating

No. Fiber Warp Weft Ga.''

Plain weave Lbs. per inch75 Polyester 84 60 100 .023

90 '' 110 68 125 .031

110 '' 128 80 145 .033

Atlas multiwarp200 Polyester 243 97 238 .047

250 '' 290 94 275 .064

300 '' 358 94 316 .066

Allowable Working Tension(AWT) @ 1⁄10 fabric break

Euro-Asian Lab rating

No. Fiber Warp Weft Ga.''

Plain weave Lbs. per inch

100 Poly/Nylon 73 34 75 .024

125 '' 86 35 85 .024

75 160 '' 105 40 102 .028

90 200 '' 131 43 122 .034

110 250 '' 165 43 146 .040

Atlas multiwarp

fabricsyield

More Tonsper Dollar!

American fabrics are numbered at AWT (Allowable Working Tension) of1/10 of warp break in lbs. per inch of width (PIW).

Euro-Asian fabrics are numbered at AWT of 1/10 break of warp plus weft inNewtons per millimeter (N/mm). One N/mm = .571 lbs./in. Thus Euro-Asianfabrics are numbered more than twice as high as American.

Fabricsfor Belts 70%

Warp+ Weft

70%Warp

+ Weft

6

110 lb. Polyester isused more than any otherfabric in general industry.From hay to quarry stone,this fabric is strong, flexi-ble and plain-woven forstraight tracking, supportof materials between idlers,and uniform troughing.

* Price Rubber Corp.The industry leader

in setting productstandards.

2#Trucking limit is 13' dia. x 50,000 lbs.

Stk. 22 on 110 lb. PolyesterCarcass Covers PIW 36'' 48'' Gauge''

2 Ply 1/32 x bare .3167 11.40 15.20 .137220 1/32 x 1/32 .3853 13.87 18.50 .169

1/16 x bare .3853 13.87 18.50 .1691/8 x bare .5231 18.83 25.10 .2311/8 x 1/16 .6606 23.78 31.70 .294

3/16 x bare .6606 23.78 31.70 .294 3/16 x 1/16 .7981 28.73 38.30 .356

1/4 x 1/16 .9356 33.68 44.91 .419 3 Ply 1/8 x bare .6469 23.29 31.05 .284 330 1/8 x 1/16 .7814 28.24 37.65 .347

3/16 x bare .7844 28.24 37.65 .347 3/16 x 1/16 .9219 33.19 44.25 .409

1/4 x bare .9219 33.19 44.25 .409 1/4 x 1/16 1.0590 38.14 50.85 .472

4 Ply 3/16 x 1/16 1.0020 36.07 48.09 .442440 1/4 x bare 1.0020 36.07 48.09 .442

1/4 x 1/16 1.1390 41.02 54.69 .505 3/8 x 1/8 1.5520 55.87 74.50 .692

Any width to 72 ' ' Any Quantity Per FootÞ

$ $ $

*PRC

Conveyor Belt

7

Changing raw mater ia l and labor pat terns have el iminated avariety of bel t fabr ics , in favor oftwo universal weaves: 110 lb. Polyesterplain weave, and 200 lb. Atlas mult iwarpPolyester. Vir tual ly a l l appl icat ions aresat isf ied with these two fabrics and theproper choice of rubber compounds. These are the world’s most cost-effect ive construct ions.

(Cont inued)

200 lb. Atlas multiwarpgives extra strength withfewer plies. In heavyservice, this means moretons per dollar. In under-ground work, this fabric ispopular because of the lightweight and flexibility.This is the choice of thoseseeking maximum value.

Our Montgomery plantnever sleeps!

There are millions of feet ofthese belts running right now!Still the American Standard.

Þ

2 Ply

3 Ply

4 Ply

5 Ply

Stk. 22 on 200 lb. Atlas Carcass Covers PIW 36'' 48'' Gauge''

$ $ $ 1/8 x 1/16 .7317 26.34 35.12 .322

400 3/16 x 1/16 .8692 31.29 41.72 .3841/4 x 1/16 1.0070 36.24 48.32 .4471/4 x 1/16 1.1660 41.98 55.98 .514

600 5/16 x 1/16 1.3040 46.94 62.58 .576 3/8 x 1/8 1.5790 56.84 75.79 .701

1/4 x 1/16 1.2820 46.14 61.52 .561 5/16 x 1/8 1.5570 56.04 74.73 .686

800 3/8 x 1/8 1.6950 61.00 81.33 .748

3/8 x 1/8 1.8100 65.15 86.87 .795

1000 1/2 x 1/8 2.0850 75.06 100.08 .9201/2 x 3/16 2.2230 80.01 106.68 .983

Any width to 72 ' ' Any Quantity Per Foot

Made inUSA


2# Conveyor Belt

8

2# Made inUSA

Made from All-American mater ia lsto s tandard American specif icat ions bypeople of ski l l and experience. The Polyester fabr ic exceeds thestrength of Euro-Asian fabrics by 20%(see page 5) .

Widely used for handl ing sand, gravel , and readymix,

PRC #2 compounds are used in bothskims and covers , to s tandard gauges.There is nothing skinny about this bel tbut the pr ice . Economy is achievedthrough volume product ion and carefulAmerican craf tsmanship!

PacificConveyor Be l t

Special

Discount71 ⁄2%

Stk. 95 on #75 Polyester fabr ic Carcass Covers PIW 24'' 30'' 36'' 48'' Gauge''

$ $ $ $ $1/8 x 1/16 .6419 15.41 19.26 23.11 30.81 .2742 Ply

3/16 x 1/16 .7794 18.71 23.38 28.06 37.41 .336

3/16 x 1/16 .8942 21.46 26.82 32.19 42.92 .3793 Ply1/4 x 1/16 1.0320 24.76 30.95 37.14 49.52 .442

Any width to 72 ' ' Per Foot – Any quant i tyÞ

PIW is Per Inch of Width, per foot.

And, we slit,punch, laceor vulcanizeto suit yourapplication.

Made bythe Mile!

9

Stk. 24 on 110 lb. PolyesterCarcass Covers PIW 24'' 30'' 36'' Gauge''2 Ply 1/8 x 1/16 .6697 16.07 20.09 24.11 .294220 3/16 x bare .6697 16.07 20.09 24.11 .294

3/16 x 1/16 .8097 19.44 24.30 29.15 .356 3 Ply 1/8 x 1/16 .7944 19.07 23.83 28.60 .347 330 3/16 x bare .7944 19.07 23.83 28.60 .347

3/16 x 1/16 .9344 22.43 28.04 33.64 .409 4 Ply 3/16 x 1/16 1.0140 24.35 30.43 36.52 .442 440 1/4 x 1/16 1.1540 27.71 34.64 41.56 .505

Stk. 24 on 200 lb. Atlas3/16 x 1/16 .8811 21.14 26.43 31.72 .384

1/4 x 1/16 1.0210 24.51 30.63 36.76 .4473/16 x 1/16 1.0410 24.99 31.24 37.49 .451

1/4 x 1/16 1.1810 28.35 35.44 42.53 .514 Cut edge to 72'' Any Quantity Per Foot

Atlas

2 Ply400

3 Ply600

Þ

Log Trough Bel ts - Stk. 24 on 200 lb . AtlasAtlas Covers PIW 24'' 30'' 36'' 42'' 48'' 60'' Gauge''

2/400 3/16 x bare .7408 17.78 22.23 26.67 31.12 35.56 44.45 .3223/600 1/4 x bare 1.0410 24.99 31.24 37.49 43.74 49.98 62.48 .4514/800 5/16 x bare 1.2970 31.13 38.91 46.69 54.47 62.25 77.81 .5615/1000 3/8 x bare 1.5530 37.26 46.57 55.89 65.20 74.52 93.18 .670

Cut edge to 72 ' ' Any Quantity Per Foot Þ

$ $ $ $

$ $ $ $ $ $ $

PRC #2 MORTurpene Resistant

Makes i tPRC #2 MOR Better!

IndustryStandard

From sawmill to finished paper, this beltserves the timber industry.

Wood Yard

10

PRC #2 MOR covers are terpenes resistant,and widely used in handling pine chips,soybeans, corn, wheat or sorghum inagriculture harvesting and processing.

Stk. 24 on 110 lb. PolyesterCarcass Covers PIW 24'' 30'' 36'' Gauge''

2 Ply 3/16 x bare .8372 20.09 25.12 30.14 .544220 3/16 x 1/16 1.0120 24.30 30.37 36.44 .6063 Ply 3/16 x bare .9931 23.83 29.79 35.75 .597330 3/16 x 1/16 1.1680 28.04 35.05 42.06 .6594 Ply 3/16 x bare 1.0930 26.23 32.79 39.35 .630440 3/16 x 1/16 1.2680 30.43 38.04 45.65 .692Cut edge to 60 ' ' Any Quantity Per Foot

PriceCleat

PriceCleat. . . a product of Pride!

$ $ $ $

PRC #2 MORTurpene resistant

We will skive the cleats fromboth edges of this belt for up to 12'' deep for $2 per foot net.

A very popular andhard working designfor incline conveyorshandling gravel, sand,fertilizer, or sawdust.Full 1/4'' x 1/4'' V-cleats on6'' centers are molded withthe covers for extra long life.

Þ

11

Many crusher superin-tendents have used this belt fordecades where service is hard.Before Hyflex was developed, itwas the best the rubber industryhad to offer. It still does anexcellent job on primary crush-ers in handling the heavy, jaggedquarry stone.

This compound resists cutting,tearing, gouging, and on Atlasmulti warp fabrics, these beltsyield more Tons per Dollar thanever before!

Still an IndustryStandard!

ValuethatLasts!

1 BeltStk. 21 on 110 lb. Polyester

Carcass Covers PIW 36'' 48'' Ga.''$ $ $2 Ply 1/8 x 1/16 .6850 24.66 32.88 .294

220 3/16 x 1/16 .8294 29.86 39.81 .356 3 Ply 3/16 x 1/16 .9553 34.39 45.86 .409 330 1/4 x 1/16 1.0990 39.59 52.79 .472 4 Ply 1/4 x 1/16 1.1800 42.47 56.62 .505 440 3/8 x 1/8 1.6130 58.05 77.40 .692 5 Ply 1/4 x 1/16 1.2600 45.34 60.46 .538 550 3/8 x 1/8 1.6930 60.93 81.23 .725

1/2 x 1/8 1.9810 71.32 95.09 .850 Cut edge to 72'' Any Quantity Per FootÞ

Stk. 21 on 200 lb. AtlasCarcass Covers PIW 36'' 48'' Ga.''

$ $ $2 Ply 1/8 x 1/16 .7561 27.22 36.30 .322 400 3/16 x 1/16 .9006 32.42 43.22 .384

3 Ply 3/16 x 1/16 1.0620 38.24 50.98 .451 600 1/4 x 1/16 1.2070 43.43 57.91 .514

3/8 x 1/8 1.6400 59.02 78.69 .7014 Ply 1/4 x 1/16 1.3220 47.59 63.45 .561800 3/8 x 1/8 1.7550 63.17 84.23 .748

5 Ply 1/4 x 1/16 1.4380 51.75 68.99 .6081000 1/2 x 1/8 2.1590 103.63 77.72 .920

Cut edge to 72'' Any Quantity Per FootÞ

Material WeightsMaterial Lbs./Cu. Ft.Wood Chips 20Coke 30Corn 45Rice 45Soybeans 45Wheat 50Coal 50Clay 75Bauxite 80Salt 95Limestone 95Cement 100Sand 100Granite 100Gravel 110Phosphate 110Slag 110Copper Ore 140Iron Ore 150


PRC #

12

20Tons

Going to Work!

Practical trucking limit is 13' diameter x 50,000 lbs. Pricecan manufacture one-piece rolls to 18' diameter x 100,000 lbs.

In abrasion, these belts out wear any other by up to 25%. This longer life in handling iron ore, bauxite, slag, rock and in gold mining truly is impressive.Special fabric treatment for acids. Our very best!

Tailor - madefor you!

Stk. 29 on 110 lb. PolyesterCarcass Covers PIW 36'' 48'' Ga.''

$ $ $2 Ply 1/8 x 1/16 .7231 26.03 34.71 .294 220 3/16 x 1/16 .8781 31.61 42.14 .356

1/4 x 1/16 1.0330 37.18 49.57 .419 3 Ply 3/16 x 1/16 1.0080 36.27 48.35 .409 330 1/4 x 1/16 1.1620 41.84 55.78 .472

3/8 x 1/8 1.6270 58.55 78.07 .659 4 Ply 1/4 x 1/16 1.2420 44.71 59.62 .505 440 3/8 x 1/8 1.7060 61.43 81.91 .692

1/2 x 1/8 2.0160 72.57 96.76 .817 5 Ply 3/8 x 1/8 1.7870 64.30 85.74 .725 550 1/2 x 1/8 2.0960 75.45 100.60 .850Cut edge to 72'' Any Quantity Per FootÞ

Stk. 29 on 200 lb. AtlasCarcass Covers PIW 36'' 48'' Ga.''

$ $ $2 Ply 1/8 x 1/16 .7944 28.60 38.13 .322 400 3/16 x 1/16 .9492 34.17 45.56 .384

1/4 x 1/16 1.1040 39.74 52.99 .447 3 Ply 3/16 x 1/16 1.1140 40.11 53.48 .451 600 1/4 x 1/16 1.2690 45.68 60.91 .514

4 Ply 1/4 x 1/16 1.3840 49.84 66.45 .561 800 3/8 x 1/8 1.8490 66.55 88.74 .748

1/2 x 1/8 2.1590 77.70 103.59 .8735 Ply 1/4 x 1/16 1.5000 53.99 71.99 .608 1000 3/8 x 1/8 1.9640 70.71 94.28 .795


TheTop! Hyflex

PriceFlex Belt

13

Stk. 21 PRC # 1 on Straight-Warp Polyester Carcass Covers 36'' 42'' 48'' 60'' Gauge''

440 31/4 x 1/8 54.94 64.10 73.26 91.57 .5235/16 x 5/32 62.74 73.19 83.65 104.56 .6173/8 x 3/16 70.53 82.28 94.04 117.55 .711

3 warehouse inventory

$ $ $ $

Our best PRC #1 stock on Straight-Warp PolyesterCord. Lashed together like a log raft, this fabric is

almost impossible to separate from the belt covers.Strong length-wise polyester cords have no

crimp, giving great strength with very little stretch.

Cover stocks are pressed through the carcass for a unique bond for beyond

plied belt.High flexibility with rip and impact resistance make this belt hard to hurt. Lacings seat with exceptional grip.

Preferred in hard applications, this belt gives very long, trouble-free

service with little concern for early failure.

Þ


$ $ $2 Ply 1/16 x 1/16 .5531 19.91 26.54 .231220 1/8 x 1/16 .7019 25.27 33.69 .2943 Ply 1/8 x 1/16 .8294 29.86 39.82 .347330 3/16 x 1/16 .9783 35.22 46.97 .409

Widths 24'' to 72'' Any Quantity Per Foot

WasteTreatment

Designed to handle humanwaste in municipal disposalsystems. This compound does a good job in a terrible business.. . . a belt that lasts!

14

Stk. 35 on 110 lb. Polyester

Stk. 35 on 200 lb. Atlas Multiwarp

MSHANitrile

Coal and Grain

Utilities often spray coal with fuel oil tocontrol dust, while elevators handle a widevariety of vegetable oils. This Nitrile com-pound serves well in both industries, andmeets MSHA specs, for above groundservice. Carcass has exceptional strengthfor lacings.

All Price Coal Belts meet ASTM D257 conductivity tests of OSHA

Plies Covers PIW 36'' 42'' 48'' 54'' 60'' 72'' Gauge''

2 Ply 1/16 x 1/16 .6333 22.80 26.59 30.39 34.19 37.99 45.59 .231220 1/8 x 1/16 .8125 29.25 34.13 39.00 43.88 48.75 58.50 .294

3/16 x 1/16 .9919 35.71 41.66 47.61 53.56 59.51 71.41 .356

3 Ply 1/16 x 1/16 .7706 27.74 32.36 36.98 41.61 46.23 55.47 .284330 1/8 x 1/16 .9497 34.19 39.89 45.59 51.29 56.99 68.39 .347

3/16 x 1/16 1.1300 40.65 47.42 54.20 60.97 67.75 81.30 .409

2 Ply 1/16 x 1/16 .7044 25.36 29.58 33.81 38.04 42.26 50.71 .259400 1/8 x 1/16 .8836 31.81 37.11 42.42 47.72 53.02 63.63 .322

3/16 x 1/16 1.0630 38.27 44.65 51.02 57.40 63.78 76.54 .384

3 ply 1/8 x 1/16 1.0570 38.04 44.37 50.71 57.05 63.39 76.07 .389600 3/16 x 1/16 1.2360 44.49 51.91 59.32 66.74 74.15 88.98 .451

1/4 x 1/16 1.4150 50.95 59.44 67.93 76.42 84.91 101.89 .514

4 Ply 1/8 x 1/16 1.1720 42.19 49.22 56.26 63.29 70.32 84.39 .436800 3/16 x 1/16 1.3510 48.65 56.76 64.86 72.97 81.08 97.30 .498

1/4 x 1/16 1.5310 55.10 64.29 73.47 82.66 91.84 110.21 .561

Any width to 72'' Any Quantity Per FootÞ

$ $ $ $ $ $ $

15

Stk. 34 on 200 lb. Atlas MultiwarpPlies Covers PIW 36'' 42'' 48'' 54'' 60'' 72'' Gauge''

2 Ply400

1/8 x 1/16 .7844 28.24 32.95 37.65 42.36 47.07 56.48 .3223/16 x 1/16 .9261 33.34 38.90 44.45 50.01 55.56 66.68 .384

3 ply 1/8 x 1/16 .9642 34.71 40.50 46.28 52.07 57.85 69.43 .389600 3/16 x 1/16 1.1060 39.81 46.45 53.08 59.72 66.35 79.62 .451

1/4 x 1/16 1.2480 44.91 52.39 59.88 67.36 74.85 89.82 .514

4 Ply 1/8 x 1/16 1.0990 39.55 46.15 52.74 59.33 65.92 79.11 .436800 3/16 x 1/16 1.2400 44.65 52.09 59.54 66.98 74.42 89.30 .498

1/4 x 1/16 1.3820 49.75 58.04 66.33 74.63 82.92 99.50 .561


This new specification for underground coalbelt is intended to make mining safer. After fiveminutes exposure to flame, this flameoutcompound will self-extinguish producing far lesssmoke and fumes than earlier specs.

Strong, highly flexible and tough, this belt will serve well at the lowest possible costper ton.

New 2010 Specs!

MSHA Underground

$ $ $ $ $ $$

CoalBelt

MSHA Approved Under 30 C.F.R. Part 14

Mine Star

16

Several of our large belt pressesare equipped with nylon carrier belts,which leave a fine, gauzie texture onthe bottom of the belt at manufacture.This texture isn’t just pretty…it servesa purpose. It will grip steel drivepulleys better, often making laggingunnecessary. And, it will causereluctant idlers to turn rather than drag.This decreases drag on the conveyor,and allows the belt to track moreaccurately.

Best yet! It doesn’t cost anything!We do it all the time. All you have todo is ask!

Nylon Impression

forExtra

TractionBelts made to a minimum lengthmust be made slightly long. Thisoverage will be shipped, but invoicewill not exceed 2%.

17

300 º F SBR BeltA high-grade

SBR compoundwith lots of anti-oxidants to boostthe heat range

this belt willhandle. Popularfor hot sand,cement, andiron ores.

Not oilresistant


2 Ply 1/8 x 1/16 .7342 26.43 35.24 .294220 3/16 x 1/16 .8922 32.12 42.82 .356 3 Ply 3/16 x 1/16 1.0230 36.81 49.08 .409 330 1/4 x 1/16 1.1800 42.49 56.66 .4724 Ply 1/4 x 1/16 1.2600 45.37 60.49 .505440 3/8 x 1/8 1.7340 62.41 83.22 .6925 Ply 3/8 x 1/8 1.8140 65.29 87.05 .725550 1/2 x 1/8 2.1300 76.65 102.20 .850

Stk. 23 on 200 lb. Atlas2 Ply 3/16 x 1/16 .9633 34.68 46.24 .384 400 1/4 x 1/16 1.1210 40.36 53.81 .447 3 Ply 1/4 x 1/16 1.2870 46.33 61.78 .514600 3/8 x 1/8 1.7610 63.38 84.51 .7014 Ply 1/4 x 1/16 1.4030 50.49 67.32 .561800 3/8 x 1/8 1.8810 67.54 90.05 .7485 Ply 3/8 x 1/8 1.9910 71.69 95.59 .7951000 1/2 x 1/8 2.3070 83.06 110.74 .920Cut edge to 72'' Any Quantity Per FootÞ

HHoott BBee ll tt ss

$ $ $

Operating belt temperatures are established by laboratory heataging for one week at the stated temperature, without significantdegrading of compound physicals. Belts may serve well abovethese temperatures if they are operated intermittently, allowed tocool on the return side, or “hosed” to reduce heat.

No elastomer will endure more than our #16 Chlorobutyl at400º F continuous operation. Nylon and polyester fabrics willmelt at 500º F.

Stk. 44 on 110 lb. PolyesterCarcass Covers PIW 24'' 30'' 36'' Gauge''

2 Ply220 3/16 x 1/16 1.140 27.34 34.18 41.01 .606

3 Ply330 3/16 x 1/16 1.304 31.29 39.12 46.94 .659

4 Ply440 3/16 x 1/16 1.404 33.69 42.11 50.53 .692

Widths 24'' to 60'' Any Quantity Per Foot

$ $ $ $

Þ

18

350 º F EPDM


2 Ply 1/8 x 1/16 .7494 26.98 35.97 .294220 3/16 x 1/16 .9114 32.81 43.74 .356 3 Ply 3/16 x 1/16 1.0430 37.55 50.07 .409 330 1/4 x 1/16 1.2050 43.38 57.84 .4724 Ply 1/4 x 1/16 1.2850 46.26 61.68 .505440 3/8 x 1/8 1.7710 63.75 85.00 .692

Stk. 44 on 200 lb. Atlas2 Ply 3/16 x 1/16 .9825 35.37 47.16 .384 400 1/4 x 1/16 1.1440 41.20 54.94 .447 3 Ply 1/4 x 1/16 1.3120 47.22 62.97 .514600 3/8 x 1/8 1.7980 64.72 86.29 .701

4 Ply 1/4 x 1/16 1.4270 51.38 68.51 .561800 3/8 x 1/8 1.9130 68.87 91.83 .748

Widths 24'' to 72'' Any Quantity Per FootÞ

$ $ $

Price Cleat

Often used in foundry and ore servicewhere oil is not a factor. Very flexible,with top adhesions, and highly weatherresistant.

Full 1/4 x1/4 cleatson 6'' staggered spacing can be molded onthis belt at time of order. Move stuff uphill!

Not oilresistant

19

400º F Chlorobutyl Belt

OurBest!

These two bel ts are a t the Top and the Bottom of what e las tomers can do!

Þ

Þ

For hot sandand foundry use.We’ve tried manyother compoundsbut always comeback to this.

Nothing elsetakes the heatas well. ThisChlorobutyldoes thejob!

Þ


$ $ $2 Ply 1/8 x 1/16 .9133 32.88 43.84 .294220 3/16 x 1/16 1.1200 40.33 53.78 .356

3 Ply 1/8 x 1/16 1.0590 38.14 50.86 .347330 3/16 x 1/16 1.2670 45.59 60.79 .409

Stk. 16 on 200 lb. Atlas 2 Ply 1/8 x 1/16 .9844 35.44 47.26 .322400 3/16 x 1/16 1.1910 42.90 57.19 .3843 Ply 3/16 x 1/16 1.3730 49.44 65.92 .451 600 1/4 x 1/16 1.5800 56.89 75.85 .514Cut edge to 72'' Any Quantity Per Foot

Cold to 80˚ below Zero!

Polar BearStk. 31 on 110 lb. Polyester

Carcass Covers PIW 36'' 48'' Ga.''$ $ $2 Ply 1/8 x 1/16 .7956 28.64 38.18 .294

220 3/16 x 1/16 .9703 34.93 46.57 .356 3 Ply 3/16 x 1/16 1.1060 39.81 53.09 .409 330 1/4 x 1/16 1.2810 46.10 61.47 .472

4 Ply 3/16 x 1/16 1.1860 42.69 56.92 .442440 1/4 x 1/16 1.3610 48.98 65.30 .505

Stk. 31 on 200 lb. Atlas2 Ply 3/16 x 1/16 1.0410 37.49 49.98 .384400 1/4 x 1/16 1.2160 43.77 58.37 .447

3 Ply 3/16 x 1/16 1.2130 43.66 58.21 .451600 1/4 x 1/16 1.3870 49.94 66.59 .514Cut edge to 72'' Any Quantity Per FootÞ

Special compounds remain flexible below freezing. Will notcrack and break. This belt will work below what most operators

can stand.

20

Non-drying

350º F

Alumina Belt

A 100% Nitrile compound will handle hot asphaltand petroleum based products to 350º F. Thisbelt will serve well in a highly destructive chore.

Heat andOil to350º F.

Made to handle the drying action of Alumina,this belt remains flexible and alive. Covers do notcrack, flake, or become brittle.


$ $ $2 Ply 1/16 x 1/16 .6583 15.80 23.70 .2311/8 x 1/16 .8472 20.33 30.50 .294220

3/16 x 1/16 1.0360 24.86 37.29 .3563 Ply 1/8 x 1/16 .9875 23.70 35.55 .347330 3/16 x 1/16 1.1770 28.23 42.35 .409

1/4 x 1/16 1.3650 32.76 49.14 .472Cut edge to 72'' Any Quantity Per FootÞ


$ $ $2 Ply 1/8 x 1/16 .7586 18.21 27.31 .294220 3/16 x 1/16 .9231 22.16 33.23 .356 3 Ply 3/16 x 1/16 1.0560 25.34 38.01 .409330 1/4 x 1/16 1.2200 29.29 43.93 .472

Stk. 38 on 200 lb. Atlas2 Ply 1/8 x 1/16 .8297 19.92 29.87 .322 400 3/16 x 1/16 .9944 23.86 35.80 .3843 Ply 3/16 x 1/16 1.1630 27.90 41.85 .451600 1/4 x 1/16 1.3270 31.85 47.77 .514

4 Ply 1/4 x 1/16 1.4430 34.62 51.93 .561800 3/8 x 1/8 1.9360 46.46 69.70 .748


Nitrile – Asphalt

21

The critical factors of elevator belting are the bucketprojection (how far it sticks out at the lip) and the tugof the bucket bolts on the belt carcass... the ability ofthe carcass to hold the bolts and not allow the boltheads to wallow out the bolt holes and pull though thebelt, dropping the load or tearing the belt at this weak-ened area.

Buckets are spaced apart on the elevator beltwhen they are loaded by digging in the boot.Usually they are turned faster and throw the loadaway from the elevator at the top. Grain and otherlight, free flowing materials are handled in thisway.

When large, lumpy materials must be elevated,the buckets are spaced closer together and filledwith a chute. Belt speeds are slower than with“digging” elevators.

Size of abucket is

the size of the opening.

Elevator Belt

Elevator BootBuckets Dig to Load

Price will produce elevator belts toany specification. Many may be suppliedfrom stock belts shown in previous pages. If anarrow belt (under 24'') must be made to spec.,trim is up to 2'' per edge, so an upcharge must be made.24'' no upcharge. Pricing example:

PIW from factoryx width x (100 + upcharge)

Made towidth andlength.

22'' 1.520'' 3.318'' 5.616'' 8.315'' 10.114'' 11.913'' 14.112'' 16.711'' 19.710'' 23.39'' 27.8

Loading Chute

22

Standard Elevator Bucket Punching

5 x 4 P-1 2 3-3/16 9/32 1/46 x 4 P-1 2 4-3/8 9/32 1/46 x 5 P-1 2 4-3/8 9/32 1/47 x 4 P-2 3 2-11/16 9/32 1/48 x 4 P-2 3 3-1/16 9/32 1/49 x 4 P-2 3 3-5/8 9/32 1/47 x 4-1/2 P-2 3 2-11/16 9/32 1/47 x 5 P-2 3 2-11/16 9/32 1/48 x 5 P-2 3 3-1/16 9/32 1/49 x 5 P-2 3 3-5/8 9/32 1/4

10 x 5 P-2 3 4-1/8 9/32 1/410 x 5-1/2 P-2 3 4-1/8 9/32 1/4

8 x 6 P-2 3 3-1/16 9/32 1/49 x 6 P-2 3 3-5/8 9/32 1/4

10 x 6 P-2 3 4-1/8 9/32 1/410 x 7 P-2 3 4-1/8 9/32 1/411 x 5 P-3 4 3 9/32 1/412 x 5 P-3 4 3-3/8 9/32 1/411 x 6 P-3 4 3 9/32 1/412 x 6 P-3 4 3-3/8 9/32 1/411 x 7 P-3 4 3 11/32 5/1612 x 7 P-3 4 3-3/8 11/32 5/1614 x 5 P-4 5 3 9/32 1/414 x 6 P-4 5 3 9/32 1/415 x 6 P-4 5 3-1/4 9/32 1/414 x 7 P-4 5 3 11/32 5/1615 x 7 P-4 5 3-1/4 11/32 5/1616 x 5 P-5 6 2-7/8 9/32 1/416 x 6 P-5 6 2-7/8 9/32 1/418 x 6 P-5 6 3-1/8 9/32 1/420 x 6 P-5 6 3-1/2 9/32 1/416 x 7 P-5 6 2-7/8 11/32 5/1618 x 7 P-5 6 3-1/8 11/32 5/1620 x 7 P-5 6 3-1/2 11/32 5/16

8 P-7 5 3 9/32 1/49 P-7 5 3 9/32 1/4

10 P-7 5 3-1/2 11/32 5/1611 P-7 5 4 11/32 5/1612 P-7 5 4-1/2 11/32 5/1613 P-8 7 3-1/2 11/32 5/1614 P-8 7 4 11/32 5/1615 P-8 7 4 11/32 5/1616 P-8 7 4-1/2 11/32 5/1618 P-8 7 5 11/32 5/1620 P-9 9 4 11/32 5/16

BucketSize

PunchStyle

No. ofHoles

HoleCenters

Hole BoltSize Size

0 0

P - 10 0 0

P - 2

0 0 0 0 0

P - 40 0 0 0 0 0

P - 50

00

0 0

P - 70

00

0 0

00

P - 80

00

00

00

00

P - 9

0 0 0 0

P - 3

1"

1"

1"

Material WeightsMaterial Lbs./Cu. Ft.Wood Chips 20Coke 30Corn 45Rice 45Soybeans 45Wheat 50Coal 50Clay 75Bauxite 80Salt 95Limestone 95Cement 100Sand 100Granite 100Gravel 110Phosphate 110Slag 110Copper Ore 140Iron Ore 150

Any punching by customer pattern.

Punching

23

ServicePunching elevator bolt holes, per hole

Heavy conveyor and 350 PVCLightweight belt and PVC

Punching belt for lacing, per inchIncluding lacing customer’s beltPlus new belt lacing

Vulcanizing belts endless, in shopPer inch of belt widthNo charge for belt used in splice

Slitting customer’s belt, per footTwo cuts per passBelt must be clean

$.31 .25

1.39 Catalog

31.00

Manufacturer ofHeavy Conveyor Belt

Brushes .65 eachGood shelf life

¢

For easyvulcanizingand fieldrepair work. Noheavy equipmentnecessary.

Coverage SC2000 Cement30 sq.ft. 1 kg. (Quart) $ 65.69

Hardener(Qt.) 40 gr. $ 12.83

Cold Bond

Splice Kits

24

ToolsPorcupineRoller2'' x 2''$ 126.30

SmoothRoller2'' x 2''$ 34.09

“V” HookPly Knife$ 13.64

CleatSkiver$ 17.05

of thetrade

CorrugatedStitcher1/4'' x 2''

$ 22.73

for field vulcanizing

• Cement• Solvent • Tie gum• Fabric dip • Spline strips• All fresh from factory production

Splice Kits are made to orderfrom factory production lines

Call (800) 633-1470 for price.

25

3'' Pin Loc US Pat. #4,477,202With pin and clip.

Cast nodular iron journalwill turn a square shaft with

real authority. Shaft has keyway.Used throughout Price factories.

Size Capacity WT. Shaft(lbs.) (lbs.)

3'' 10,000 160 3'' x 29''

$ 1,270.50

To extend the life ofsizing screens.

Size'' Foot1/4 $ .943/8 1.26 1/2 1.68

50' /100' coils

ROUND FLAT HEX

65 duro

(R53)

CustomMade

Any size and shape to 60'' dia x 15' longTan pure gum, SBR,

EPDM, Neoprene,Viton, Nitrile.

Promptdelivery from

MemphisCall (800) 331-9360

Sleeves and Rollers

Channel

Epoxy / Wood ChipCut with a saw

4'', 6'', or 8'' dia.with sq. holes

LengthHole 3'' 72''2 1/4'' $ 1.04 ––3 1/4'' 1.49 35.644 1/4'' 2.08 49.90

Belt Cores

26

••Engineered for a lifetime

of service!

Roll widths 60'' to 96''Roll weights 20,000 to 30,000 lbs. Price

Quality • Service • DurabilityMade by the people who make the belt.

SlittersWindups

and more !(334) 277-5470(800) 633-1470

Belt MasterEquipment

27

Conveyor Lift (feet) per 100' ofIncline Conveyor length (C:C)

5 8.717-1/2 13.05

10 17.3612-1/2 21.6415 25.8817-1/2 30.0720 34.2022-1/2 38.2725 42.2627-1/2 46.1730 50.0032-1/2 53.7335 57.36

Examples:

A 350 ft. C:C Conveyor on a 17-1/2 degree incline would have a total lift of 105.25feet (3.5 x 30.07).

A 203 ft. C:C Conveyor on a 20 degree inclinewould have a total lift of 69.43 feet (2.03 x 34.20).

or, a 69.43 lift on a C:C Conveyor 203 feet long would indicate an incline of 20 degrees(69.43/2.03), read from chart.

Engineering Help!

Properly chosen, most belts will give long andtrouble-free service, even in severe applications.The choice of the best elastomers and suitablecarcass fabrics, plied together for adequate strengthand flexibility can be assured through properengineering.

Calculating Lift from Degrees of Incline Calculating Belt Weight.375 lbs. per sq. ft. per 1/16” thickness.

Calculating Feet per RollFeet = D2 - d2

15.3TD is outside diameter of roll (in inches). d is core diameter (in inches). T is belt thickness (in inches).

Calculating Belt ThicknessCover Thickness + Carcass GaugeBelt Thickness

Calculating Roll Diameter .325 √T x L

T is Belt Thickness (in inches) L is Belt Lengths (in feet)

Conveyor Belt Calculatorsare just the tool for complete conveyor design.Easy to use, these little “gems” will “check youout” for most jobs. Call 1•800•633•1470 to receiveyour’s FREE and for instant computer help ondesign problems.

Engineering

28

Impact and Abrasion

The greatest wear on a belt usually occurs at the point of loading. The impactof large, heavy, jagged and sharp materials can cut and gouge the belt covers,particularly if covers are thin.

Limit the fall of material at loading. Load in direction of belt travel, and cush-ion the fall with baffle plates and cushion idlers to avoid scuffing. Use skirtboard at point of loading to avoid spillage, trapping of material, and overload-ing. Continue the skirt board down the sides of the conveyor to limit spillage.

Lift gobbles horsepower

Typical Conveyor 500 ft. longwith 36'' belt 3 ply 330

Nothing moves materials like

Conveyor Belt

Over 45º AngleFree fall is top ofchute to top of belt

Under 45º AngleFree fall is bottom of chute to top of belt

45º

Baffle Plate –

Cushion Idlers

Return Rollers

100 lbs.Cuft

Lift Tons / hr. HP

20' 1321 55

40' 1321 81

60' 1321 107

80' 1321 134

100' 1321 160

35º Idlers a t 400 f t / min.

29

In the transition, the belt edge distance from troughing idlers to the face of thepulley is greater than the belt center distance. The edge must stretch slightly notto tear, while the belt center must compress slightly but not pucker or buckle.These differences are compromised by the length of the transition and by properlocation of the troughed belt on the centerline tangent.

Several adjustable troughing idlers are recommended between the last regularidler and the face of the pulley, to support the load and to limit spillage.

Rubber can outwear steel many times over. An extra 1/16'' of rubber in the beltcover can yield up to 25% longer belt life. More tons per Dollar!

The transition distances shown will accommodate virtually allrubber belt constructions, including steel cable belts. Most belts,properly installed, will give many years of –

Trouble – Free Service!

Trans i t i on

30

Minimum pul ley diameters

Minimum width for t roughing (empty)

Maximum width for load support

Maximum bucket project ion

Fabric Carcass 80% 35º 100 lb. elevatorTension Idlers Material

AWT 10:1 Inches Inches Inches Inches

75 2/150 14 18 30 475 3/225 16 30 42 690 2/180 15 24 36 590 3/270 17 30 42 690 4/360 19 33 54 7

110 2/220 16 30 36 5

110 3/330 18 30 48 7

110 4/440 20 36 60

110 5/550 26 42 72

Atlas 10:1m200 2m 400 18 24 42m200 3m 600 30 36 60m200 4m 800 30 42 72m200 5m 1000 48 48 72m250 2m 500 24 36 42m250 3m 750 30 42 60m250 4m 1000 36 48 72m250 5m 1250 48 54 72

Þ

All figures consider belt carcassonly. Heavy covers mayincrease pulley diameters andload support widths.

Empty belts must ride the bot-tom rollers of troughing idlers torun true.

Loaded belts can be steered bycanting one or more sets ofidlers. The belt will move in the direction they are turned like bicycle handle bars.

Recommended take up travel is2% of conveyor belt length.


Price belts are made to width.They run true from the start!

Belt Carcass

31

1. The belt splice moves sideways on the system as it makes complete rounds, generally moving a constant distance off center, sometimes several inches up the troughing idlers. The belt was not squared when spliced, causing the splice section to move sideways. Re-splice the beltto make it straight.

2. The belt rides to one side of the conveyor, climbing the idlers and staying there. The conveyor idlers or pulleys are not properly installed... pulleys are not perpendicular to the system. Align the pulleys and idlers, one or more of which are askew or crooked to the belt centerline.

3. The belt spins on the drive pulley. Tighten the belt, lag the drive pulley or lighten the load.

4. The belt edges curl inward, forming a “pipe” on the top side of the conveyor. The belt is too tight, the load too heavy, or the transition not long enough. Loosen the belt.

5. The belt stretches more than 2%, and tends to become more narrow or “necked down”. Usually caused by tightening the belt to stop it from slipping on the drive pulley. Lag the pulley andloosen the belt... it is telling you that the load is too great, and you are straining the carcass. Or, use a belt with a stronger carcass.

6. The belt breaks. The load is too great for the carcass... lighten the load or use a heavier belt.

7. Belt fasteners pull out. The belt carcass is too light for the load or the fasteners were not properly installed. Re-lacecarefully and/or use a heavier carcass belt.

8. The vulcanized splice peels apart. Improper vulcanizing job, due to incompatible raw materials, cured compounds, poor cements, or improper cooking time/temperature.

9. The belt settles into the bottom troughing idler junction, soon wearing a sag strip in the belt. The carcass is too light, the load is too heavy, and maybe the belt is pulled too tight and forced into the idler junction. Loosen the belt, use a heavier carcass, or use idlers with staggered or offset rollers that have no crevices between the rollers.

10. The belt drifts around on the conveyor system when empty or lightly loaded. The belt carcass is too heavy (stiff). The conveyor belt must trough completely against the idler rollers, or it cannot be controlled.

...know your Stuff!A conveyor belt does exactly what you make it do, no more and no less.

It has no mind of its own. It is not wayward and it does not hate you! It issympathetic and will tell you exactly what is wrong with your conveyor system.Pay attention!

32

Made from PRC 2 SBR stock for the severeservice of clearing ice and snow from streets, highways,airport runways, taxi strips and parking lots. Tough, flexibleand very wear resistant. Supplied in any width or length. It takes a scrubbing!

Stk. 22 (22SB) Standard 50 ft. rolls.Works withauthority !

60 duro2400 lb. tensile

Thick'' PIW 4'' 6'' 8'' 10'' 12'' 48''$ $ $ $ $ $ $1/4 .5636 2.25 3.38 4.51 5.64 6.76 27.05

3/8 .8453 3.38 5.07 6.76 8.45 10.14 40.571/2 1.1272 4.51 6.76 9.02 11.27 13.53 54.113/4 1.6908 6.76 10.14 13.53 16.91 20.29 81.161 2.2544 9.02 13.53 18.04 22.54 27.05 108.21

Any Quant i ty Per Foot

Press cured

This tough, hard rubber blade will clean a belt while it runs. Gives long life without damage to the belt when used on either side.

Wiper Blades

Snow PlowBlades

Thick" PIW 4'' 6'' 8'' 10'' 12'' 48''

3/4 1.6506 6.60 9.90 13.20 16.51 19.81 79.231 2.2008 8.80 13.20 17.61 22.01 26.41 105.64

1 1/2 3.3011 13.20 19.81 26.41 33.01 39.61 158.45

Any width Any Quantity Per FootÞ

Stk. 80 50' rolls or cut to length.

1700 lb. tensile80 duro

#

$ $ $ $ $ $ $

33

Chute LiningSkirt Board

Thick" PIW 4'' 6'' 8'' 10'' 12'' 48''

1/4 $ .5503 2.20 3.30 4.40 5.50 6.60 26.413/8 .8253 3.30 4.95 6.60 8.25 9.90 39.60

1/2 1.1003 4.40 6.60 8.80 11.00 13.20 52.81

3/4 1.6506 6.60 9.90 13.20 16.51 19.81 79.23

1 2.2008 8.80 13.20 17.61 22.01 26.41 105.64

1 1/2 3.3011 13.20 19.81 26.41 33.01 39.61 158.45

Any width Any Quantity Per Foot

Nylonimpression

PRC #2 Grade belt cover stocks make this the finestproduct on the market, Press cured for uniform gauge and square corners. Produced in 48'' widths x continuous lengths, slit and cut to length.

(22SB) in constant production! 50' Rolls Std.

60 Duro2400 lb. tensile

45ºBeveled if desired

Þ

PRC #2

MSHA Skirt BoardThick" PIW 4'' 6'' 8'' 10'' 12'' 48''

1/4 .6678 2.67 4.01 5.34 6.79 8.01 32.053/8 1.0017 4.01 6.01 8.01 10.02 12.02 48.08 1/2 1.3356 5.34 8.01 10.68 13.36 16.03 64.113/4 2.0033 8.01 12.02 16.03 20.03 24.04 96.161 2.6711 10.68 16.03 21.37 26.71 32.05 128.21

Any width Any Quantity Per Foot

Our standard 33 SBR underground coal stock molded into skirt board,Nylon impression.

(33SB) 50' rolls or cut as specified

66 Duro1800 lb. tensileÞ

$ $ $ $ $ $ $

34

400 º F Chlorobutyl

Skirt Board

Thick'' PIW 4'' 6'' 8'' 10'' 12'' 48''$ $ $ $ $ $ $1/4 .8281 3.31 4.97 6.62 8.28 9.94 39.75

3/8 1.2422 4.97 7.45 9.94 12.42 14.91 59.631/2 1.6561 6.62 9.94 13.25 16.56 19.87 79.493/4 2.4842 9.94 14.91 19.87 24.84 29.81 119.241 3.3125 13.25 19.88 26.50 33.13 39.75 159.00

Any width Any Quant i ty Per FootÞ

No elastomer stands heat so well as stock 16, used on our mostheat resistant conveyor belt. We mold that 16 stock into 48'' slabs,Nylon impression both sides, then slit to width and cut to length. Steelmills, sintering plants, taconite processors, and foundries all have aneed for this premium product. Square edges everytime.

Stk 16 (16SB) 50' rolls standard.65 duro.

1900 lb. tensile

Thick'' PIW 4'' 6'' 8'' 10'' 12'' 48''$ $ $ $ $ $ $1/4 .6208 2.48 3.72 4.97 6.21 7.45 29.80

3/8 .8958 3.58 5.37 7.17 8.96 10.75 43.00 1/2 1.1711 4.68 7.03 9.37 11.71 14.05 56.21 3/4 1.7211 6.88 10.33 13.77 17.21 20.65 82.611 2.2714 9.09 13.63 18.17 22.71 27.26 109.03

Any width Any Quant i ty Per FootÞ

60Duro

2400 lb.tensile

Duck Back(22DB) Stk. 22 on 75 lb. Polyester

Chute LiningA ply of fabric with our standard chute lining makes mounting easier in

hoppers and slope sheets. Greatly extends equipment life.

35

Economy Skir t Board

Sheet Rubber

(N60) Black Neoprene SheetPlate finish

60 duro. Per Foot – Any quant i ty1000 lb. tensile350% elongation

Oil resistant,for generalgasket work.Temp. from–20º to 170º F

Thick'' 36'' 48''1/16 $ 3.03 $ 4.071/8 6.01 7.973/16 9.99 13.171/4 12.07 16.113/8 20.78 27.751/2 27.81 37.53

Thick" 36" 48"

1/8 11.46 15.011/4 22.79 30.093/8 34.28 ––1/2 46.41 61.87

40 duro3400 lb. tensile600% elongationA pure gumfloating stock.

$ $

(R40) Tan Pure Gum SheetPlate finish

Per Foot – Any quant i ty

(R75) Red Sheet PackingFabric or Plate finish

75 duro. Per Foot – Any quant i ty600 lb. tensile200% elongation

For cold watergasketing––20º to 170º F

Thick'' 36'' 48''1/16 $ 3.32 $ 4.411/8 6.56 8.423/16 9.85 13.15 1/4 12.79 16.78

Thick'' 36'' 48''1/16 $ 4.71 $ 6.351/8 9.24 12.413/16 14.44 19.421/4 18.50 24.95

(E60) Black EPDM60 duro. Plate f inish.Resis ts chemicals , ozoneand aging. 900 lb . tensi le350% elongat ion.Per Foot – Any quant i ty

(R46) Black CorrugatedMatting – 1/8'' std. ribmax. roll – 35 yards

Any quantity

For high trafficaisles in schools.churches andpublic buildings.

Width'' Per Ft.24 $ 3.5936 5.3348 7.23Closeout

Discount 33%

(R60E)A thrifty skirting

for less abrasive applications. Helps

control the load andlimit spillage.

50' rolls only

50' Rolls only – Per FootThk.'' 4'' 6'' 8'' 10'' 12''

$ $ $ $ $3/8 1.22 1.83 2.44 3.05 3.66

1/2 1.63 2.44 3.25 4.06 4.88

3/4 2.44 3.66 4.88 6.11 7.33 60 Duro.

1 3.26 4.88 6.50 8.13 9.75 1000 lb. tensile

Closeout

Discount 33%

36

Lightweightand P VC Belt

PriceRubber

4

4

4

4

4

4

4

Cut

Slit

Skive

Punch

Lace

Vulcanize

Cleat

We do it all

for you !

. . . since 1960

37

Food Belt

D103

D101

Steam clean this one i f you l ike. Our mostpopular food grade bel t – handles anything!

Þ

D102

FDA and USDAapproved

-20º to 212º F

Odorless and Tasteless

Polyester Fabric Fabric Impression Top Carcass Covers PIW 12'' 18'' 24'' 36'' Ga.''

$ $ $ $ $3/105 3/64 x FS .6699 8.04 12.06 16.08 24.12 .140Any Width to 72'' Any Quantity Per FootÞ

Handles most foods,light acids, oils, and alkalies,

Temp 0º to 180º F

The pleasure in thekitchen is in working with

clean equipment. These belts help.FDA approved

Polyester Cut PcsCarcass Covers PIW 12'' 18'' 24'' 36'' Ga.''

$ $ $ $ $120 1 side .2769 3.32 4.18 6.65 9.97 .140

Any Width to 72'' Any Quantity Per FootÞ

White Mini – Rough Top

Nitrile

*Not FDA/USDA Approved.

*Special OFR Stock will handle Meat, Cheese, and Animal Fat.

Polyester Fabric Smooth TopCarcass Covers PIW 12'' 18'' 24'' 36'' Ga.''

$ $ $ $ $2/70 3/64 x FS .3894 4.67 7.01 9.35 14.02 .0943/105 3/64 x FS .5704 6.85 10.28 13.70 20.55 .125

Any Width to 72'' Any Quantity Per Foot

38

PRC grade #2 gives a lively, rubbery grip topackages on inclines to 37º. All-Polyesterfabrics slide easily on steel surfaces.

Þ

D240

Carcass Covers PIW 12'' 18'' 24'' 36'' Ga.''2/150 3/32xFS $ $ $ $ $


This soft tan rubber top grips packages and cartons forincline conveying. Clean, non-marking and slides easily ontables and metal chutes.

Black or Tan Rubber

Carcass Covers PIW 12'' 18'' 24'' 36'' Ga.''120 3/32xSB .2567 3.08 4.62 6.16 9.24 .150


Especially useful if grease is present. The bare bottom slides easily on steel.

Woven Polyester

Rough Top

.4700 5.64 8.46 11.28 16.92 .180

Stk. 95 on all Polyester Fabric.Carcass Covers PIW 12'' 18'' 24'' 36'' Ga''

$ $ $ $ $ 2/150 1/8xbare .3197 3.84 5.75 7.67 11.51 .2111/8x1/32 – – – – – –

3/225 1/8xbare .5011 6.01 9.02 12.03 18.04 .2541/8x1/32 – – – – – –

Any width to 48'' Any Quantity Per Foot

$ $ $ $$

D106

D105

39

Carcass 3/32xFS PIW 12'' 18'' 24'' 36'' Ga.''$ $ $ $ $2/150 Tan .6171 7.41 11.11 14.81 22.22 .188

2/150 Black .5973 7.17 10.75 14.33 21.50 .188


Has asoft touch!

Made in USA

D104

Black or Tan

Rubber

Cresceut Top

Þ

Easy cleaning, long lasting.

D107

P o p u l a r a s a t u b e b e l t i n h a n d l i n gf e r t i l i z e r . C l e a n a n d n o n - c o r r o d i n g .

Incl ine Conveyor Bel t– most popular forhandl ing fragi le products up incl ines to

37º . Polyester, bare back s l ides wel l .

Wedge Grip

Covers

Carcass 1 side PIW 12'' 18'' 24'' 36'' Ga''120 Black .2576 3.09 4.64 6.18 9.27 .140125 White .3559 4.27 6.41 8.54 12.81 .150200 Black .3967 4.76 7.14 9.52 14.28 .170

Any Width to 72'' Any Quantity Per Foot

$ $ $ $ $

40

C235

C115

Transmission

Hot StockSaw Mill

Polyester carcass Carcass Covers PIW 12'' 18'' 24'' 36'' Ga.''

$ $ $ $ $3/105 FS x FS .3894 4.67 7.01 9.35 14.02 .1414/140 FS x FS .5329 6.39 9.59 12.79 19.18 .188


Originally designed to replace leather belts for farm tractors and ingeneral machine shops, this belt still serves in light conveying of saw dust, wood scraps, furniture and feed.

Suitable for handling raw rubber on the mill in processing. The 35 oz Silver Hard duck topgives tack free operation.

Still used on old saw mill drives where the carriage must reverse at the end of each stroke.

Carcass Covers PIW 12'' 18'' 24'' 36'' Ga.''$ $ $ $ $3 ply bare x FS .4521 5.43 8.14 10.85 16.28 .141

4 ply bare x FS .5659 6.79 10.19 13.58 20.37 .188


and Water Belt

Not FDAApproved

Black P VC BeltingPolyvinylchloride onall-Polyester carcass.

D110

Popular where oil and grease are present such asauto assembly plants, machine shops, and steelrolling mills.

The tough, woven Polyester carcass is fully impregnated with PVC for flex, strength and durability. Slider bed, too.

For light applications and slider bed service.

For heavy duty service, sharp and greasy products.

Þ

$ $ $ $ $Carcass Covers PIW 12" 18" 24" 30" Ga.''

120 Bare .1842 2.19 3.32 4.42 5.53 .125150 Bare .2204 2.65 3.97 5.29 6.61 .156

120 Covers .1836 2.20 3.30 4.41 5.51 .141150 One .2430 2.92 4.37 5.83 7.29 .172200 Side .3265 3.92 5.88 7.84 9.80 .219

120 Covers .2432 2.92 4.38 5.84 7.30 .156150 Both .3387 4.06 6.10 8.13 10.16 .203200 Sides .4001 4.80 7.20 9.60 12.00 .250350 .5295 6.35 9.53 12.71 15.89 .317450 .5821 6.99 10.48 13.97 17.46 .354

Any width to 72'' Any Quantity Per Foot

PVC Cleats and V-guides. . . .bonded to your belt to suit your application.Call (800) 331-9360 (Memphis) for designhelp and quotation.

White or Black

1/2'' to 3''high

O thru D

41

42

Wherever materials move

Flexcois hardat work!

Fastener Metals

Steel fasteners are made from Carbon Steel, suitablefor most applications.

Stainless Steel fasteners are made from type 316, providing extra resistance to abrasion, corrosion,acids and magnetic fields.

MegAlloy (trademark of Flexible Steel Lacing Co.)fasteners are several times more resistant towear and abrasion than steel. Not recommendedfor corrosive situations.

Everdur (trademark of American Brass Co.) fasteners are made from an alloy of Copper and Silicon. They are spark-proof and non-magnetic; widely recommended for grain elevators, flour mills, and coal mines, where explosion is a constant hazard.

43

Heavy duty – not hinged.Universally acceptedfor all applications.Available in metals shown on page 49 90˚ Templets

“E” box of 25 “C” bucket 100 sets 1, 140 1 1/4 2 1/4Size Range''

1 .188/.438

140 .188/.438

190 .313/.563

1 1/2 .438/.688

2 .563/.813

2 1/4 .563/1.188

2 1/2 .750/1.000

3 .934 OVER

$ $ $ $ $ $ $Top + Bot57 73

63 7959 75

75 95

172 213

$Top + Bot233 298

260 326241 306

306 388

708 –

$

E box of 10

(2) Bolt Hand Tools Cracking Power Tools QuickBreak Punch Bore Bit Wrench Chisel Punch Bore Bit Wrench Socket

¬ 29.12 20.00 30.76 21.22 102.09 19.16 30.76 29.50

29.12 20.00 30.76 21.22 102.09 18.81 30.76 28.97

32.80 24.22 31.61 28.35 102.09 26.99 31.33 34.88

Size For

11 140

1901 1/2

2 22 1/42 1/2

3 3

$ $ $ $ $ $ $ $ $

¬ for Steel Nuts, 375x/550

Rip Repair FastenersBox of 25

Size Range'' Steel SSRP1 .250/.500 86.29 310.58RP2 .375/.813 116.82 506.29

$ $

Tools

Rubber - CoveredFive 6 plate panels per box

Size Range'' Steel MegAlloy140 .188/.438 112.43 134.90190 .313/.563 114.03 136.832 .563/.813 139.82 ––

$ $ Skiver

$17.57

Plate Lacing

71.68

Steel StainlessÂ MegAlloy¬ Everdur Steel MegAlloy¬ Lgth 190 1 1/2, 2 2 1/2, 3

31.05 –– –– 127.96 12 27.13 31.17 ––

37.11 237.81 152.51 152.86 18 27.13 31.17 ––

42.57 276.89 179.44 175.43 24 27.13 31.17 55.11

38.76 237.19 199.88 159.69 30 33.92 38.94 68.90

49.24 296.18 243.03 202.77 36 40.75 46.73 82.65

114.03 561.26 422.94 469.80 42 47.52 54.55 96.43

48 54.32 62.35 110.24

61.55 –– –– –– –– –– 60 74.66 77.93 137.78

64.66 –– –– –– –– –– 72 –– 93.51 165.33

44

NylonCoveredSteel

Cablesame

asR5

Popular on equip-ment with smallpulleys, the beveledplate edges and recessed

nuts avoid hangups. The 375 X is used with belts up to190 PIW carcass while 550 serves to 400 PIW. Thespark-free Everdur serves coal and grain applications.

Hinged Plate

Size 375 X 550 375 X 550 100¢Range .250 – .406 .250 – .625 Curved coilLength Steel StainlessÂ Everdur Steel StainlessÂ MegAlloy¬ Templet 1⁄4 dia.

12 30.69 –– –– –– –– –– 41.81 37.17 18 47.31 171.75 200.06 35.87 135.61 87.09 41.81 37.17 24 58.99 213.18 248.84 45.97 173.20 111.47 41.81 37.17 30 75.59 273.60 319.09 58.86 222.22 142.82 52.22 40.26 36 92.14 334.04 389.37 71.74 271.18 174.12 62.67 55.79 42 108.73 394.45 459.64 84.56 320.22 205.45 73.11 65.0348 125.33 454.87 –– 97.45 369.22 236.77 83.56 74.3560 174.37 –– –– 123.19 490.51 –– 104.48 92.93

$ $ $ $ $ $ $

$

$ $ $ $

$

$

Me t a

l s¬ MegAlloy has steel nuts and bolts.

MegAlloy top and bottom platesand bare stainless cable hinge pin.

Everdur is all spark-free copperand silicon alloy. Hinge pinis bronze cable, nylon covered.

Â Stainless is all stainless with nyloncovered stainless cable hinge pins.

Flex-LocA nylon strip that helps eliminate

ripple from distortion of metal lacing; helps seal belt ends from dirt and moisture.FL7C for 140 38.31FL11C for 190 up 52.55and 375x/550

100' boxes

100 / Box 375 X 550 375 X 550Steel 34.45 36.91 25.71 25.71

Stainless 111.29 111.29 195.61 195.61Everdur 122.88 122.88 82.78 82.78

Extra Bolts Nuts

Lacing Tools for 375X and 550hinged lacing are the same asSize 1 Plate Lacing..

Tape

Per set with hinge pins

160.03

45

Widely used throughout industry, particularlyin underground mining where high flexibilityover small pulleys is essential.

R5SRivet

Set

79.94$

18 17.34 88.59 89.27 25.43 –– 5.21 8.42 22.94 57.3924 22.49 109.69 89.27 33.08 43.61 7.01 11.25 23.85 59.7530 27.69 135.00 89.27 40.71 53.71 8.75 14.01 24.85 62.1636 34.62 168.73 89.27 50.87 67.14 10.49 16.83 –– 64.5942 39.80 194.04 178.53 58.53 77.17 12.23 19.65 –– 66.9148 46.71 239.18 178.53 68.66 83.90 13.98 22.47 –– 69.2754 51.91 –– 178.53 76.30 100.65 15.74 25.28 –– 71.6460 58.84 301.17 178.53 86.46 114.13 17.49 28.08 –– ––72 70.97 –– 178.53 104.28 137.61 20.97 33.69 –– ––

R5 R51⁄2 R6 Nylon Covered Self-settingRange .219'' - .438'' .313-.594 .406-.688 Hinge Pins Steel Rivets

Strip Per set (2 strips) Set Set Steel Armored Belt BoxLgth.'' Steel Stainless MegAlloy Steel Steel Cable Cable Thk.'' 100 250

$ $ $ $ $ $ $

$ $

$ $

R2Range .125''-.375''

Strip Per set (2 strips)Lgth.'' Steel Stainless

12 7.85 21.6618 11.93 36.1324 15.49 46.9630 19.09 57.8236 23.88 72.2742 27.44 83.0848 32.22 97.5560 40.57 122.81

For thin beltsover small pul-leys, R2 does afine job on foodand agriculturalapplications.

Uses R5 hinge pins and r ivets

Size Pulley2 5" b e l t s t o 3 3 0 P I W5 9" b e l t s t o 4 5 0 P I W

51/2 12" b e l t s t o 6 5 0 P I W

6 18" b e l t s t o 8 0 0 P I W

.25''

Hinge pin retaining-washers - 50 pkg $ 5.89

ABCDEFG

.313

.375

.438

.531

.563

.656

.688

ThinRivetMin. Rivet

Applications

Rivet Hinged

46

FLEXCOBR6A rivet lacing designed to butt-join

belt ends and eliminate punching. The6-Rivet design will hold belts to 400 lb.tensions over pulleys as small as 14''diameter. Suitable for belts to 35ºtroughing, offered especially as analternate to field vulcanizing. Suppliedin strips which may be joined for widerbelts.

$24'' strip 70.6930'' strip 92.52 36'' strip 116.4242'' strip 144.49

A mechanical splicethat will roll over anypulley 20'' diameter orlarger, 5/16'' to 1 1/4'' thk. belt.

Special tip and tail platesare used with regular Flexcoplate fasteners.

Steel SSTip and Tail Kit $ 137.44 $ 286.31Templet set (3) $ 227.20

Wedlock!. . . easier than

vulcanizing.

Aluminum applicationtool, complete as shown.

$ 2016.76 – 48''

Rivet Plate

47

Size Range S SS S SS S SS S SS S SS S S00 .050-.063 23.50 44.29 35.23 66.43 46.99 88.57 58.67 110.71 70.46 132.84 82.19 93.931 .063-.094 23.00 46.32 34.49 69.47 46.00 92.65 57.49 115.80 68.99 138.96 80.47 91.977 .094-.141 22.01 52.55 33.02 78.87 44.06 105.14 55.04 131.41 66.07 157.67 77.07 88.09

15 .125-.156 23.00 58.99 34.49 88.47 46.00 117.99 57.49 147.46 68.99 177.00 80.47 93.6220 .156-.188 26.94 80.09 40.39 120.12 53.84 160.17 67.32 200.21 80.77 240.24 94.25 107.7125 .188-.250 26.94 83.09 40.39 124.64 53.84 166.19 67.32 207.74 80.77 249.28 94.25 107.7127 .250-.281 25.95 93.44 38.94 140.17 51.91 186.85 64.88 233.57 77.85 280.30 90.82 103.8035 .281-.313 32.26 146.01 49.91 219.04 66.54 292.05 83.18 365.05 99.81 438.07 116.44 133.1245 .313-.378 32.31 167.64 48.44 251.43 64.63 335.35 80.75 419.07 96.90 502.87 113.07 129.2355 .378-.438 43.58 –– 65.36 325.91 65.37 434.54 108.90 543.20 130.66 651.83 152.46 174.24

4 sets per box with hinge and guide pins12'' 18'' 24'' 30'' 36'' 42'' 48''

$ $ $$ $ $ $$ $ $$

AlligatorFor medium duty non-troughing

service. Install with a hammer.Plain steel or Stainless. See

page 39 for extra hinge pins.

$Size'' Each

RSC-187-4 169.88RSC-187-6 254.83

RSC187-12 509.62RSC187-24 1019.24

Designed for light-weight, high-strength belt oversmall pulleys. They operate smoothly over steel slider-beds or on troughed conveyors. All lacings have stainless steel staples.(4 sets / box with nylon covered steel cable pins)

Size'' RS125 RS187Range .125 - .188 .188 - .250

Min Pulley 3" 4"

Box Steel SS Steel SS

12" 57.88 105.17 65.57 143.2218" 86.86 157.77 97.40 214.8124" 115.76 210.34 129.85 286.4130" 144.75 262.94 162.34 358.0536" 173.66 315.51 194.80 429.6148'' 235.60 428.27 264.16 583.29

$$$$

$

StapleThe RSC-187-6 Tool installs

6'' of lacing per move across the belt. Handles both 125 and 187 lacing.

Lacing Tool

48

Size Range Steel SS Steel SS1D .063 - .094 26.65 36.28 –– ––1 .125 - .156 27.03 37.85 –– ––2 .156 - .188 25.97 47.01 26.81 53.863 .188 - .219 27.60 49.53 28.17 57.444 .219 - .250 28.63 51.43 29.24 59.43

4 1/2 .250 - .281 30.10 55.59 –– ––5 .281 - .344 33.36 64.22 34.91 74.586 .344 - .375 37.92 72.09 39.96 ––7 .375 - .406 39.90 76.46 –– ––

Size'' Steel SS.0534 –– 89.91.0650 89.13 93.44 .0790 102.58 109.89 .0930 102.58 120.14.1090 –– 130.81 .1250 107.61 141.49 .1560 131.18 165.50

$ $

Belt CleanerAn assembly made for easy installation.

Urethane blade cleans the sticky off the belt, easy tension adjustment.

Extra BladesLgth Each Lgth Each

$ $ 16'' 223.97 46'' 702.77 22'' 316.65 52'' 810.94 28'' 396.13 58'' 919.05 34'' 502.01 64'' 1019.47 40'' 594.69 70'' 1119.87

Clipper12/12''sets

per box

$ $ $ $

Carded Unibarpins pins no pins

For lightweightfood and trans-mission belts.Easy on and off.

Vise Lacer

4'' 71.68 7'' 103.92 10'' 148.84

$

Nylon Covered

Hinge Pins for Staple or Clipper100' Box

V - belt fastenersV-belt 10 Sets Nails Fasteners RockerSize per box 100 pkg. holder pin tool

$ $ $ $A312 198.08 –– 22.82 ––B437 263.54 16.04 52.39 29.27C531 277.84 17.52 103.93 36.09D750 493.19 17.18 –– ––

25 staples

Blade LengthBelt 2'' Short 8'' Short

$ $ 24'' 22'' 879.53 16'' 764.84 30'' 28'' 994.29 22'' 879.53

1109.00 28'' 994.29 36'' 34''42'' 40'' 1223.72 34'' 1109.0048'' 46'' 1338.45 40'' 1223.7260'' 58'' 1567.90 52'' 1453.1772'' 70'' 1797.35 64'' 1682.60

X

X

* PRICED AT TIME OF INQUIRY.EZPI

49

Fuel and Steam(H61) Tank Truck (H13) Fuel Oil

(P4) Steam Hose

(H67) Hot Tar andAsphalt

(H71) Hot Air Blower (H82) Cement Discharge

For suction and dischargeservice with petroleum fuels.

Nitrile tube and Neoprenecover give long life.

150 psi

Oil resistant tubeand cover for

suction anddischarge

150 psi350º F

For heating tank Used in drytruck and RR cement tanker

cargoes. service tounload.

150 psi 75 psi330º F 3/16'' tube

– Chlorobutyltube, spiral wire carcass.Where safety matters!

250 psi450º F

Widely used for homedelivery. Nitrile tube and

cover handlepetroleumeasily.

150 psi

ID'' Ft.1 4.68

1 1/4 5.111 1/2 5.60

2 6.50 2 1/2 8.89

3 10.224 13.64

ID'' Ft.2 17.54 3 23.284 35.38

ID'' Ft.$ 2 7.14

3 9.744 14.23

ID'' Ft.$4 8.46

ID'' Ft.

1/4 1.093/8 1.261/2 1.763/4 2.751 3.67

1 1/4 5.651 1/2 4.21

ID'' Ft.1/2 3.23 3/4 3.65 1 4.44

1 1/4 6.21 1 1/2 7.24

2 10.66

Red or Black

$

$

$

$

50

DredgeSleeves and

150 PSIworking pressure

Made fromthe same toughrubbers and fabrics as our big conveyor belts – built for severe service in handling abrasive materials.

These sleeves provide flexibility between discharge pipes but resistcollapse from pinching shut. Top grade adhesions deny ply separation while all-Polyester fabrics provide flexibility and strength.

Made or cut to length

(P7) Dredge SleevesStk. 22 on 110 lb .

Polyester Per FootID'' Ply 3/8'' tube 1/2'' tube 3/4'' tube 1'' tube4.50 3 21.41 31.86 42.75 53.646.625 4 41.22 49.23 65.26 81.308.625 4 53.66 64.09 84.97 105.84 10.75 5 70.65 83.66 109.68 135.69 12.75 6 90.13 105.56 136.41 167.27

14 7 105.92 122.86 156.74 190.62 16 8 129.00 148.36 187.07 225.79 18 9 154.06 175.84 219.40 262.9620 10 181.11 205.31 253.71 302.10

(D3) Chain Clampfor large hoses, 6' chain

$ 95.05 ea.$ $ $ $

As tough asthey come!

51

Stk. 22 on 110 lb. PolyesterPer Foot

ID'' Ply 3/8'' tube 1/2'' tube 3/4'' tube 1'' tube4.500 3 30.19 36.41 48.86 61.306.625 4 47.10 56.26 74.59 92.91 8.625 4 61.32 73.25 97.10 120.96 10.75 5 80.75 95.61 125.34 155.07 12.75 6 103.01 120.64 155.90 191.16

14 7 121.05 140.41 179.13 217.85 16 8 147.42 169.55 213.80 258.05 18 9 176.07 200.96 250.74 300.5220 10 206.98 234.64 289.95 345.26

The spring steel wire inthe carcass allows this hoseto stand the severe suctionservice of constant dredging operations. Tough as a bootand made to last!

Made inUSA

$ $ $ $

(P72) Sand Suction Hose

150 lb. StandardBuilt-in Nipple Welded Flange

Subject to change in unstable steel market.

Bui l t - in Nipplesand Flanges$ $

Nipple OD'' Each OD'' Each4 4.5 386 9 3105 5.5 411 10 3546 6.625 471 11 3648 8.625 576 13.5 47910 10.75 768 16 77312 12.75 864 19 86914 14 1004 21 96216 16 1166 23.5 162218 18 1275 25.125 1863

Standard 10' or 20' lengths,or made to order.

SandSuctionHoses

52

(H28) Contractor’s

Good

(H-89) Green PVC

Economy

Utility

A general purpose hose, popular in moderate to mediumservice.

Two - ply carcass isreinforced with springsteel wire.

A very popular hose forgeneral industrial and contracting service. Entirely weatherproof and easy to clean.

Smooth boreand cover.

ID'' Ft.$1 1/4 3.53

1 1/2 3.852 3.87

2 1/2 6.283 6.30 4 9.09 5 17.756 19.948 35.64

ID'' Ft.1 .96

1 1/4 1.08 1 1/2 1.44

2 2.092 1/2 3.08

3 3.74 4 6.20 6 13.158 22.23

Max.100' coils

$

Water Suction and

We couple all hosesto suit the application.Choose couplings, foot-valves and strainersfrom coupling section.

A real workhorse of a hose for heavy

service where the going ishard andsteady.

MaxID'' Lgth.' Ft.

$4 32' 15.77 5 30' 19.71 6 32' 23.668 30' 34.7510 31' 47.4612 30' 63.7614 20' 82.33

(S110) Heavy Duty

The two-ply carcass is madefrom 110 lb. belt fabric over a hightensile spring steel wire. The SBR tube and cover give excellentresistance to abrasion andweather.

1/8'' tube1/16'' cover

53

Discharge Hoses(H78) Blue PVC (H19) Heavy Duty

Popular with generalcontractors, these

hoses roll andstore flat.

Light andclean, coupledfor connectionwith pipe andpumps.

A higher pressure “flat” hose to

stand surges.

Rot andmildew proof.

Easy to cleanand good workingpressure, too.

Coupled tosuit your joband equipment.

ID'' PSI Ft.1 70 .39

1 1/2 70 .412 65 .49

2 1/2 60 .91 3 60 .88 4 60 1.17 5 40 4.92 6 45 2.19 8 45 4.15 10 35 14.5012 30 19.8514 30 31.0116 30 37.46

ID'' Ft.$1 1/2 2.73

2 3.25 2 1/2 4.39

3 5.51 4 7.57 5 17.366 13.46

6 5/8 16.078 19.2210 30.57

*12 60.27* 150 max. psi

(H79) Red PVC

Tough rubber tubeand cover over a synthetic car-cass.

150 psi

Ready-mix plantsuse this hose to dropfrom scale houseto cement truck.

Flexible and tear-resistant. Avaliablein any length.

ID'' PSI Ft.$ 2 150 1.25

2 1/2 150 1.65 3 150 2.47 4 125 3.15 6 115 6.04 8 70 11.33

$

DropHose

(R-35T)Tan Gum Rubber Boots

ID'' Foot6 23.80 8 31.79 10 40.72 12 48.26 24 97.75 Any Quantity

* 1/4'' wall Seamlessconstruction

$

54

Air Hoses

(P21) PVC Air and Water

(H25) Blue Push-onAir Hose

Spiral Air Hose

Temp.-30º to 185ºF

Spiral-lay carcassgrabs the

fittings!

200 psi

Needs no clamps

Blended compounds, flexibleand weather resistant – feelsRed, Blue, like rubber.or Yellow 70º F

Toughyellow SBRpin-prickedcover resistsabrasion andweather. BlackSBR/Nitrile tubehandles oil mistfrom compressors.

Long thestandard forheavy duty rockdrilling, this isindustry’s best.

ID'' Ft. PSI$1/2 2.82 600

3/4 2.92 6001 3.61 600

1 1/4 4.54 6001 1/2 5.57 600

2 6.59 6002 1/2 11.77 450

3 13.04 450

ID'' Ft. PSI$1/4 .42 300

5/16 .59 3003/8 .52 3001/2 .65 3005/8 .83 2503/4 1.19 2501 1.49 250

ID'' Ft.$1/4 1.11

3/8 1.351/2 1.37

Max.100' lgths.

We couple all hosesat a modest charge.

Under 1'' ID,$2 per end.

Over 1'' ID,$2 per inch of ID.

We supply the bands.

You pick the couplings.

3

3

3

3

(H35) YYellowellow

55

and more ...(H36) Red Pneumatic Tool

(from P23) (P22)Black

These 3/4'' x 50' x 200 psilengths are coupled with 3/4''

Universal Quick Acting (P23)fittings and bands Red

each end. $ 58.18 each

(H6) White Creamery

For dairy andcreamery wash-

down withplenty of

hot water.150 psi

(H3) White molded nozzle has 3/4'' metalmender molded in.

(H31) Sand BlastHighly abrasion re-

sistant static conductingpure gum tube.

50' or 100' lengths. (D6)

150 psi

SpecialAir and Water

In a widerange of ID’sand workingpressures, thesehoses serveindustry every-where.

SpecialEPDMcompoundsgive maximumweather re-sistance andlong life.

Flexible andeasy handling,these hosesare availablein lengths to700 feet long.

We chopand couplefor any job.

•Also availablein black.

ID'' Ft.$3/4 1.98

nozzle –

ID'' Ft. Cplg.$ $ 1/2 2.98 6.10

3/4 3.72 4.751 4.65 5.79

1 1/4 4.86 8.811 1/2 5.86 9.88

ID'' PSI Ft.$1/4 150 .36

• 1/4 200 .30 1/4 250 .43 1/4 300 .45 5/16 200 –– 5/16 300 .48 3/8 150 .51

• 3/8 200 .41 3/8 250 .45 3/8 300 .48 1/2 150 .58

• 1/2 200 .51 1/2 250 .59 1/2 300 .59 5/8 150 .65 5/8 200 .73 5/8 300 .74

• 3/4 150 .73 3/4 200 .84 3/4 250 .84 3/4 300 .87

• 1 150 .891 200 .92

•1 1/4 200 1.90• 1 1/2 200 2.19

2 200 3.05

56

(D30) Mill Hose NST or IPS CoupledSingle Jacket

A woven Polyesterjacket and flexible

rubber tube makethis a popular in- Cpld Aluminum Rocker Lug.

plant hose forfire protection (D52P) Fog Nozzle

and general Polycarbonate withwashdown brass stem.

service.

Common ThreadsNPT (National Pipe Tapered) same as

IPT (Iron Pipe Thread), seal by cold flow oftapered threads. No washer is required.

NST (National Standard Thread) same asNH (National Hose) are straight threads and

use a washer to seal.NPSH (National Pipe Straight Hose) same as

IPS (Iron Pipe Straight) are straight threads anduse a washer to seal.

These threads are not interchangeable and anadapter must be used for connecting threads.

250 psitest

(D59) Spanner(D59HW) Hydrant Wrench, ZincWrench, Adjustable plated. Handles (D51P) Polycarbonatemalleable iron head Pin-lug. cplgs. Nozzle NST or IPS.with 18'' steel handle. 1-1/2'' x 10'' x 1/2'' orifice.Fits all hydrant and $ 10.22hose couplings. $ 22.36

(D51) Polished BrassNozzle

$Size'' Lgth.'' Orifice Each

3/4 GHT 6 1/4 17.41 3/4 IPS 6 1/4 17.41

1 IPS 8 5/16 23.53 1 1/4 IPS 10 3/8 32.69 1 1/2 IPS 10 1/2 32.14

2 IPS 12 9/16 57.17 2 1/2 IPS 12 1 72.19

1 1/2 NST 10 1/2 32.14 2 1/2 NST 12 1 72.19

Size'' Each$1 1/2 3.11

2 3.272 1/2 3.89

3 5.45

$ $ $Size'' Foot 50' 100'1 1/2 .92 73.43 119.22

2 1.22 100.44 161.242 1/2 1.68 129.73 213.73

3 2.00 176.31 276.31

Size'' x Thread Each3/4 x GHT 23.56 3/4 x IPS or NST 23.56

1 x IPS or NST 26.281 1/2 x IPS or NST 23.242 1/2 x NST 98.89

$

*Cpld Short Shank D40 IPS

*

*

Fire Hoses

57

and Couplings(D85) UL Grade Fire Hose - Gold

Mildew ProofSize'' Jacket Per Ft. 50' Cpld.1 1/2 Single 1.11 82.73

300 lb.2 1/2 test 2.00 143.731 1/2 Single 1.16 85.23

500 lb.2 1/2 test 2.08 147.731 1/2 Double 1.52 103.23

400 lb.2 1/2 test 2.54 170.731 1/2 Double 1.68 111.23

600 lb.2 1/2 test 2.89 185.73

$ $

ColorsRedOrangeBlueTanYellowGreenBlack

For industrial fire protection.Long-life rubber tube and syntheticyarns. Coupled with AluminumRocker Lug, NST. UL label availablefor .35 per ft.

May be color coded (dyed) for plantidentification.

(D56)Pin LugAdaptersCast Brass

Female x Male Each1 1/2 NST 1 1/2 IPS 23.531 1/2 IPS 1 1/2 NST 23.792 1/2 NST 1 1/2 IPS 17.15 2 1/2 NST 1 1/2 NST 17.15 2 1/2 NST 2 1/2 IPS 40.34 2 1/2 IPS 2 1/2 NST 42.07

3 IPS 2 1/2 NST 39.44

$

(D67) HexAdaptersTurned Brass

Female x Male Each1 1/2 IPT 1 1/2 NST 12.791 1/2 NST 1 1/2 IPT 12.792 1/2 NST 3/4 IPT 44.642 1/2 NST 1 IPT 60.642 1/2 NST 1 1/2 IPT 44.872 1/2 NST 2 IPT 44.062 1/2 NST 2 1/2 IPT 28.012 1/2 NST 3 IPT 50.333 IPT 2 1/2 NST 55.41

$

$

(D66) HexAdaptersTurned Brass

$ $

(D54) Fire Hose CouplingsAluminumRocker Lug

Specify threadNST or IPS

Size Set Washer1 1/2 27.23 1.162 1/2 43.73 1.82

(D64)HydrantAdapter

Brass Pin Lug

2 1/2'' NST x 3/4'' xGHT or IPT $ 16.95

Male x Male Each1 1/2 IPT 1 1/2 IPS 13.371 1/2 IPT 1 1/2 NST 13.371 1/2 IPT 2 1/2 NST 36.38

2 IPT 1 1/2 IPS 26.572 IPT 1 1/2 NST 26.572 IPT 2 1/2 IPS 36.532 IPT 2 1/2 NST 36.53

2 1/2 IPT 2 1/2 IPS 26.192 1/2 IPT 2 1/2 NST 26.19

3 IPT 2 1/2 NST 57.17

1 1/2'' .282 1/2'' .40per foot.

58

Food HosesID'' PSI Ft.

$1 150 ––2 150 9.48 3 150 12.914 150 17.465 75 24.046 75 28.10

and bore H8ID'' PSI Ft.

$3/4 115 1.84 1 100 1.84

1 1/4 90 2.31 1 1/2 85 2.58

2 85 4.25 2 1/4 –– ––2 1/2 65 5.57

3 55 7.47 3 1/2 55 ––

4 50 12.775 40 16.316 30 24.418 25 40.41

Smooth bore H9 H10ID'' PSI Ft. Ft.

$ $3/4 –– –– ––1 55 1.63 ––

1 1/4 50 1.94 4.101 1/2 50 2.30 4.27

2 40 3.11 5.88 2 1/4 40 4.51 6.62 2 1/2 40 4.80 7.12

3 40 6.17 9.48 3 1/2 35 10.45 14.37

4 35 10.73 15.515 30 18.03 24.416 30 20.54 27.048 20 31.44 ––

Green(H42) FDA Food Hose EPDM

coverMeets all

FDA require- Whitements for odorless andfood service tasteless natural-30º to 185º F rubber tube. For

suction and discharge.

Clear PVC food hoses forhandling all food. They meet

all sanitary standards.

Temp 4º to 150º F

For vacuum or discharge(H8) (H9) (H10)

Smooth cover staticwire

These see-through hoses Used forhandle all Poultryfoods in Meataccordance with Milkall regulations Wineof Beer

3-A generalFDA Canning

USDAClear

Clean and PVCClear Hoses

59

Vacuum

ID'' H53 H57 H58 H58Y1 1/2 2.41 1.60 –– 4.26

2 2.35 2.15 5.82 4.86 2 1/4 2.78 2.96 –– –– 2 1/2 3.02 2.96 6.45 5.54

3 3.34 3.31 6.71 6.22 3 1/2 3.91 3.76 –– ––

4 4.16 3.76 7.87 7.26 4 1/2 4.38 4.23 –– ––

5 4.46 4.23 8.97 9.96 6 4.99 4.41 9.76 10.26 7 5.70 5.51 11.78 13.37 8 6.34 6.16 12.64 14.82 10 8.11 7.80 17.87 –– 12 9.59 9.47 19.69 –– 14 12.47 11.03 24.80 ––

Heavy Duty - Yellow Urethane coated

Heavy Duty - Black Urethane coated

Industrial - Blue PVC coated

Lightweight - Black Neoprene coated

Per Foot

(clear with yellow helix)

Used for blowing and venting air,dust, fumes and vapors. Hoses havea spring steel wire, covered withfabric or coated for different uses.

(H60) Grey Utility Vacuumfor portable machines

Max 25' lgth.-60º to 180º F

(H16) Clear NSFbeverage tubing for

all potable services.

(H16R) ReinforcedNSF beverage tub-ing for low pressure.

$ $$$

ID'' Wall'' H16 H16R1/8 1/16 .10 –– 1/4 1/16 .16 –– 1/4 1/8 .37 .36 3/8 1/16 .21 –– 3/8 1/8 .53 .52 1/2 1/16 .27 –– 1/2 1/8 .58 .61 5/8 1/8 .70 .93 3/4 1/8 .82 1.13 1 1/8 1.06 1.71

1 1/4 1/8 2.99 2.91 1 1/2 1/4 3.21 3.67

2 1/4 4.25 5.52

$$

F o o t

ID'' Ft. Cuff$ $1 1/2 1.67 2.62

2 2.82 3.81

25'coils

Vacuum and Vent Hoses

60

Chemical

Spray

(H44) UHMW Blue EPDM (H65) XLPE Green EPDMChemical hose has high Chemical hose with cross-

molecular weight cross- linked polyethylene tubelinked polyethylene tube. will handle 90% of

corrosive chemicals.

Thishose will 240 psihandle 98%of industrial chemicals. 240 psi

(H41) Paint Spray (M18) PVC Spray Hose

Excellent Yellow ribbed pin-prickedfor lacquers, Static cover vents vapors ofpaints and Conducting agricultural chemicals.solvents. Not Not for petroleumfor hot paints. based 600Max. temp. 125º F chemicals psiworking pressure

175 psi at 70º F (D41L) SteelLong Shank

(D43) Male IPT SprayBrass Inserts Hose

(D41S) GHTShort Shank

Cast Brass

ID'' Ft.$1 1/2 9.30

2 10.74 2 1/2 16.23

3 20.134 28.81

ID'' Ft.$1 1/2 8.38

2 9.75 3 15.66

ID'' Ft.$1/4 .91

3/8 1.341/2 1.96

ID'' Ft.$3/8 .65

1/2 .90

Hose'' x Thd.'' Each Hose'' x Thd.'' Each$ $1/4 x 1/8 1.04 1/2 x 1/2 2.56

1/4 x 1/4 1.09 1/2 x 3/4 3.891/4 x 3/8 1.70 5/8 x 1/2 2.77

5/16 x 1/4 1.32 3/4 x 1/2 4.423/8 x 3/8 1.70 3/4 x 3/4 3.531/2 x 3/8 1.75 1 x 3/4 10.36

Size Set$3/8 x 3/4 ––

1/2 x 3/4 6.245/8 x 3/4 6.243/4 x 3/4 6.24

Size GHT$3/8 x 3/4 16.98

1/2 x 3/4 14.095/8 x 3/4 12.53

Size IPT$1 21.94

1 1/4 28.881 1/2 29.51

2 41.84

61

Water

Strainers and Foot ValvesPlated Steel IPT Red iron IPT

Size'' Dia. Strainer Lbs. Ft. Valve Leather1 1/2 5 9.19 2.75 15.91 3.35

2 6 10.66 5.25 23.74 6.122 1/2 6 11.43 7.50 28.64 ––

3 7 15.60 11.25 31.82 11.344 7 17.53 11.25 55.26 17.756 9 51.35 47.00 118.31 37.978 11 1/4 88.03 100.00 249.06 71.64

$ $ $

$

No. Range'' Each

400 3.50-4.00 6.64 463 4.06-4.63 6.71 525 4.69-5.25 8.95 550 5.00-5.50 8.95 600 5.31-6.06 10.11 675 6.13-6.88 11.20 769 6.94-7.63 13.59 818 7.69-8.19 19.23 875 8.25-8.88 20.08 988 8.94-9.88 21.47

1125 9.94-11.38 36.91 1275 11.44-13.00 42.47 1450 13.06-15.00 68.58 1700 15.06-17.25 85.70

(D31) Double Bolt ClampsMalleable ironCadmium Plated

Nipples(D89) Spiral andClamp MendersPlated Steel (D41) (D45)

IPT Plated

forleft handconvolutions

Wecouple

allhoses

(H40) Short ShankHeavy aluminum

casting with Brassnuts - IPSSize'' Set Washer

$ $1 1/2 4.83 .282 7.26 .31

2 1/2 13.44 .583 14.98 .484 25.87 .765 –– ––6 64.09 2.188 –– ––10 –– ––

ID'' Each$1 1/2 2.33

2 2.66 2 1/4 3.01 2 1/2 3.06

3 3.36 3 1/2 3.95

4 4.16 5 5.43 6 6.91 8 9.73 10 10.9512 15.36

Size'' Nip. Mend.$ $1/2 1.23 1.12

3/4 1.26 1.341 1.65 1.51

1 1/4 2.13 2.161 1/2 2.57 2.87

2 3.23 3.55 2 1/2 6.06 5.64

3 7.53 7.84 4 11.43 12.205 27.41 18.226 33.48 35.148 67.05 74.13 10 119.69 136.58

(D11)Strainer

(D14) FootValve

Leather

8'' Rubber Only

62

FemaleGround Male

Size'' Joint Stem Bolts Range'' Each1/2 9.65 2.32 2 1.06 - 1.19 2.243/4 13.83 4.32 2 1.31 - 1.50 2.76 1 14.60 6.10 4 1.69 - 1.94 5.26

1 1/4 22.94 6.33 4 1.78 - 2.09 7.11 1 1/2 23.78 8.03 4 2.25 - 2.56 8.02

2 32.82 11.66 4 2.50 - 2.78 14.872 1/2 69.11 20.69 4 3.06 - 3.50 36.38

3 82.24 25.87 4 3.81 - 4.06 31.88

Malleable iron, Cadmium plated

$ $ $

For high pressureservice with air, wateror steam, Boss isthe standard.

Handles Steamto 450º F.

3/4'' TripleConnector$ 4.77 ea.

These MalleableIron, Cadmium platedair tool couplingsare standard inthe industry.

(D16) Universal Quick Acting Couplings

NitrileSize'' Hose End Fem. Adapt. Male Adapt. Clamp Gasket3/8 1.64 2.07 2.07 –– .231/2 1.69 2.07 2.07 1.62 .233/4 1.93 2.07 2.07 2.26 .231 2.44 2.31 2.43 2.74 .23

1 1/4 6.79 6.37 –– 7.49 .701 1/2 7.57 6.37 –– 8.45 .70

2 8.84 7.57 –– 15.64 .70

$ $ $ $ $

The Industry Standard

High PressureBoss Couplings

(D34) (D36)(D37) Boss Clamps

(D1) QC – For Agriculture, Petroleum, Chemical, and General Industry.

Aluminu

m

Aluminu

m

Aluminu

m31

6

Stainle

ss31

6

Stainle

ss31

6

Stainle

ss

Polypro

pylen

e

Polypro

pylen

e

Polypro

pylen

e

Aluminu

m31

6

Stainle

ss

Polypro

pylen

e

Nitrile

Gasket

Size''3/4 2.09 5.83 1.35 4.71 11.32 2.02 3.48 9.09 4.48 4.90 10.20 4.63 .391 2.58 7.53 1.66 5.51 15.78 4.79 4.72 12.42 4.89 5.51 13.39 5.18 .39

1 1/4 3.48 10.92 2.44 6.68 22.74 6.79 6.95 17.99 6.72 7.53 19.69 7.18 .421 1/2 2.63 13.55 2.55 6.43 26.83 7.34 6.37 21.65 7.34 6.91 23.29 7.95 .42

2 3.18 14.83 3.05 8.11 26.14 8.81 7.95 28.63 8.88 8.73 28.42 9.11 .422 1/2 5.99 26.42 –– 11.97 36.12 –– 11.04 40.11 –– 12.74 40.11 14.30 .56

3 5.67 29.19 5.56 12.87 51.05 13.51 13.36 55.60 13.67 12.87 54.00 –– .534 9.65 54.00 11.98 16.45 74.13 23.17 19.92 83.40 23.97 19.17 81.08 25.08 .906 22.39 111.97 –– 39.58 159.97 –– 49.42 181.47 –– 44.02 163.71 –– 2.02

Size''3/4 2.21 5.30 1.56 2.74 6.80 1.56 4.17 7.92 4.49 2.51 3.13 1.46 1.781 2.58 8.15 1.85 3.26 9.31 1.73 5.51 10.92 4.58 2.45 4.71 1.58 2.00

1 1/4 4.00 11.97 2.64 4.75 14.13 2.46 7.65 15.06 6.41 3.16 8.18 1.81 2.741 1/2 3.09 15.06 2.74 3.36 17.21 2.61 5.74 17.88 6.95 2.21 9.88 1.87 2.74

2 3.98 23.37 2.84 4.37 22.39 2.84 6.95 20.85 8.57 2.79 14.47 2.59 2.74 2 1/2 6.72 32.82 –– 7.95 34.07 –– 9.34 32.10 –– 5.72 21.73 –– 2.74

3 8.42 45.79 5.49 8.42 45.56 6.03 10.81 41.00 12.59 4.66 26.10 4.72 4.03 4 12.51 71.82 10.84 12.97 79.34 10.89 15.06 56.37 20.61 7.87 42.47 8.17 4.036 37.07 162.16 –– 32.79 172.19 –– 35.52 131.27 –– 19.14 118.15 –– 15.91

Aluminu

m

Aluminu

m

Aluminu

m31

6

Stainle

ss31

6

Stainle

ss31

6

Stainle

ss

Polypro

pylen

e

Polypro

pylen

e

Polypro

pylen

e

Aluminu

m31

6

Stainle

ss

Polypro

pylen

eHand

le

$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $

A B C D

E F DC DP

$

63

Quick Cam

64

(D29) Worm GearClamps

No. Range'' Box 10

6 .44-.78 .76 8 .50-.91 .76 10 .56-1.06 .76 12 .69-1.25 .78 16 .81-1.50 .78 20 .81-1.75 .78 24 1.06-2.00 .78 28 1.31-2.25 .78 32 1.56-2.50 .78 36 1.81-2.75 .81 40 2.06-3.00 1.0744 2.31-3.25 1.2248 2.56-3.50 1.2252 2.81-3.75 1.3456 3.06-4.00 1.3460 3.31-4.25 1.3964 3.56-4.50 1.3972 1.88-5.00 1.4780 2.50-5.50 1.7088 3.12-6.00 1.7796 3.62-6.50 1.77104 4.12-7.00 1.80128 5.62-8.50 2.43152 7.12-10.00 2.61188 9.37-12.25 2.85200 10.13-13.0 ––212 10.88-13.75 3.23224 11.62-14.50 ––236 12.38-15.25 ––248 13.13-16.0 4.08312 17.13-20.0 4.97

$

$ $ $ $

$ $

Width'' SS Galv. SS Galv.3/8 40.00 18.48 57.17 28.961/2 54.86 27.72 78.94 36.385/8 75.08 30.61 107.07 43.893/4 95.29 21.67 128.84 51.98

No. ID'' Width'' SS Galv.Box of 100

3 13/16 3/8 86.63 49.08311 1 3/8 3/8 95.29 54.864 1 5/8 118.39 57.755 1 1/4 5/8 127.05 57.756 1 1/2 5/8 132.83 66.41 7 1 3/4 5/8 144.38 69.30 8 2 5/8 155.93 72.199 2 1/4 5/8 161.70 75.06

Box of 5010 2 1/2 5/8 88.07 44.7611 2 3/4 5/8 92.40 46.2012 3 5/8 98.18 49.0914 3 1/2 5/8 108.28 53.42

Box of 25

16 4 5/8 60.64 29.6018 4 1/2 5/8 65.64 32.4820 5 5/8 70.74 33.93 24 6 5/8 80.85 39.70

Widely used to securecouplings, either crimp or punchlock, galvanized or stainless.

Punch-locTool

(D22) Buckles (D23) BandsBox of 100 Box of 100'

(P20) $ 118.73

(D24) Preformed BandsPreformedBands

(D20)Banding Tool

$ 75.80

(D21)Adapter $ 60.64

$ $

$ $

*3/4'' Galvanized Bucklesare 50 to Box!

Banding

belt plant mixing plant warehouses · 3805 morrow st. (800) 633-2284 guntersville, al 35976 fax:...

Documents