· pdf fileabacus benching comes in various sizes and variations i.e. with shoe tray or shelf...

3
ABACUS DESIGN & FABRICATION LTD ABACUS design & fabrication ltd 56-57 Hutton Close Crowther Industrial Estate Washington Tyne & Wear NE30 0AH www.abacusdesignandfab.com Tel: 0191 419 2477 Fax: 0191 419 1145 VAT No 759 0713 12 Registered in England 4598025 All our products are made to measure to suit specific requirements, all of which are fabricated and then a thermoplastic coating powder is applied by electrostatic spraying. This is all carried out within our own factory workshops. Stage 1 All metal work is fabricated from mild steel, pre drilled and (MIG) welded ready for assembly. Stage 2 Framework is then coated in a colour of your choice from our extensive colour range, using a thermoplastic coating powder. Stage 3 All slats are manufactured from quality hardwood, ash or beech with pencil round edges, sealed and spray polished. Trespa (a hardened laminate) is also available in various colours. Hooks are then applied to peg rails at 150mm centres. Stage 4 Abacus deliver units flat pack as standard. We can deliver units built up ready for you to install at a small cost. CHANGING AND CLOAKROOM SPECIALISTS COUNT ON QUALITY

Upload: truongdieu

Post on 12-Feb-2018

214 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: · PDF fileABACUS benching comes in various sizes and variations i.e. with shoe tray or shelf etc. see centre pages for specification Double Sided Island Units Available with

ABACUSdesign & fabrication Ltd

ABACUS design & fabrication ltd56-57 Hutton Close • Crowther Industrial Estate • Washington • Tyne & Wear • NE30 0AH

www.abacusdesignandfab.com

Tel: 0191 419 2477 • Fax: 0191 419 1145VAT No 759 0713 12 Registered in England 4598025

All our products are made to measure to suit specific requirements, all of which are fabricated and then a thermoplastic coating powder is applied by electrostatic spraying. This is all carried out within our own factory workshops.

Stage 1

All metal work is fabricated from mild steel, pre drilled and (MIG) welded ready for assembly.

Stage 2

Framework is then coated in a colour of your choice from our extensive colour range, using a thermoplastic coating powder.

Stage 3

All slats are manufactured from quality hardwood, ash or beech with pencil round edges, sealed and spray polished. Trespa (a hardened laminate) is also available in various colours. Hooks are then applied to peg rails at 150mm centres.

Stage 4

Abacus deliver units flat pack as standard. We can deliver units built up ready for you to install at a small cost.

Changing and Cloakroom SpeCialiStS • Count on Quality

Page 2: · PDF fileABACUS benching comes in various sizes and variations i.e. with shoe tray or shelf etc. see centre pages for specification Double Sided Island Units Available with

ABACUS profile

Quality Assurance Abacus are BS EN ISO 9001 : 2000 registered for The Manufacture and Installation of Cloakroom and Changing Room Fittings and Equipment.

Safe Trader Registration Scheme Abacus are members of the South Tyneside Safe Traders Registration Scheme and has agreed to abide by a code of practice.

Abacus are delighted to be involved with the Tony Blair Sports Foundation. In the run up to the 2012 Olympics and beyond. The Foundation will increase participation in sports by young people, particularly those who are currently socially excluded.

As Signatories to the Forest Forever Policy, we actively seek from our suppliers evidence of commitment to continuous improvement in environmental performance.

ABACuS Design and Fabrication are specialists in providing cloakroom and changing room equipment.

Suppliers to education, leisure, healthcare and MOD / home office sectors.

A selection of recent contracts:

University of Wolverhampton Wallsall Campus, Gorway Road, Wolves

RAC (Private Members Club) Pallmall, London

Everton FC Training Academy Finch Lane, Liverpool

The Soccer Village Birchinley Manor, Lancashire

Abacus MD M J Barker with Tony Blair at the Friends of the Tony Blair Sports Foundation Reception

Abacus MD K B Purvis with the Premiership Trophy at The Grass Roots Football Exhibition

LOCKERS AVAILABLE : one to six doors

Standard height 1780mm high(available in various depths and widths - call for details)

0191 419 2477

Colour range

smoke white

silver

red

cream

coffee

green

yellow

blue

[email protected]

Page 3: · PDF fileABACUS benching comes in various sizes and variations i.e. with shoe tray or shelf etc. see centre pages for specification Double Sided Island Units Available with

ABACUS benching comes in various sizes and variations i.e. with shoe tray or shelf etc.

see centre pages for specification

Double Sided Island Units Available with optional shoe tray or over head shelf

External Cantilevered Benching

Wall To Floor BenchingAvailable with shoe tray or plastic feet for

none floor fixings

Single Sided Island UnitsAvailable with optional shoe tray or

over head shelf(back modesty panel not supplied)

All Floor Fixed BenchingAvailable with shoe tray or plastic feet for

none floor fixing

Cantilvered BenchingPeg Rail optional

Prison Grade Benching

ShelfWith integral Peg Rail

VARIOUS ABACUS PRODUCTS

Mobile Unit Type A 1200mm L x 1400mm H x 560mm W 12 hooks per unit and braked castor wheels

Mobile Unit Type B 1200mm L x 1400mm H x 560mm W 24 hooks per unit and braked castor wheels

Mobile Unit Type C 1200mm L x 450mm W. Available in infant (1125mm H), junior (1375mm H), senior (1680mm H). Can be wall fixed

Mobile Unit Type D 1200mm L x 1800mm H x 560mm W Comes with 10 security ring hangers

Tip Up Seat Seat 450mm W x 400mm D Wall fixing plate 200mm H x 500mm W Ideal as a shower or cubicle seat

Boot Hangers Each unit fits 12 boots 750mm H Number discs are available upon request

Seat with Back Rest Height of back rest senior (830mm) junior (690mm) infant (505mm) Shoe basket optional

Locker Stand Available in various widths to suit up to 6 lockers. All floor fixed or wall to floor fixed

Customised Benching (to allow for pipes etc)