berk-tek leviton technologies buyers guide
TRANSCRIPT
WHERE SERVICE MATTERS
ISO 9001 CERTIFIED COMPANY
Connecticut Office: 79 Harborview Avenue Stamford, CT 06902 New York Office: 20 Midland Avenue Hicksville, NY 11801
1-800-543-4333
Buyers Guide
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CP5300 | CAT 5E HIGH PoE UTP SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FORLow-bandwidth high-power PoE applications such as LED light fixture, sensors, security systems, automation, and building management
1000BASE-T network applications and mission-critical systems
PoE standards: IEEE 802.3af, 802.at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Federal, state, and municipal projects funded by ARRA^
^See Leviton website for product specific ARRA eligibility details
SYSTEM DATA SHEET
CP5300 | CAT 5E HIGH PoE UTP SYSTEM Industry leading Cat 5e 100-watt PoE solution, featuring the Atlas-X1™ connector and 22 gauge LANmark™-IP cable, offers superior performance for high-power applications
• Exceeds ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Engineered to efficiently manage heat and support PoE up to 100 watts
• Specifically designed for intelligent building and LED lighting applications
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Increases network efficiency and uptime with lower bit error rates
GUARANTEED* SYSTEM PERFORMANCE
CP5300 | CAT 5E HIGH PoE UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
AC
R-F
(ELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
PSA
NEX
T
PSA
AC
R-F
2% 2 dB 2 dB 2 dB 2 dB 2 dB 2 dB 2 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements across the entire frequency range. All values represent worst-case margins for 5- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CP5300 solution data sheet. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A EB E A
2m
A FC D CD
NEAR END FAR END
A B C D E F
Patch Cord 5D560-xx°
Patch Panel5G596-U48
Patch Panel49255-H48
Connector 5EUJK-R*5
CableLANmark™-IP
Consolidation Point 41AB2-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CP5300 | CAT 5E HIGH PoE UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 5E COMPONENT-RATED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces (plenum
rating) in accordance with UL Standard 2043• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between the plug and connector, preventing intermittent disconnects that cause arcing
• Connectors available with internal shutter to protect against dust and debris
• Unique, tool-free design requires no specialized termination or re-termination tool
• Short connector design supports a wider range of applications (e.g. shallow boxes, enclosures, bend radius, etc.)
• Connector supplied with interchangeable icons (VOICE, DATA, AV, and blank) color coded to match the connector face
• Interchangeable icons (available in 13 colors) make it easy to identify and track data, voice, or other functions
• PoE optimized tine geometry prevents arcing damage in critical contact-mating zone between the plug and connector
• Solid metal body provides 53% improvement in heat dissipation • Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 5E 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• Available in 110-Style and QuickPort flat, angled, recessed angled,
recessed, and Zero-U configurations in 12-96 port counts• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1 CAT 5E SLIMLINE PATCH CORDS• ETL Verified for TIA Cat 5e component requirements • 24-gauge stranded for maximum flexibility and extended flex life• Nominal outer diameter of .22" reduces cable pathway
congestion in racks and cabinets • SlimLine boot supports high-density patching
and easy extraction with extended-reach latch release • Made-to-order custom lengths are available• Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM - IP CABLE • ETL verified to ANSI/TIA-568-C.2• Small, round design for easy installation and reduced
maintenance costs• 22 gauge copper conductors• All FEP primary insulation• Small size OD of .24"• Bandwidth beyond Category 5e requirements• No center filler design for faster terminations• 90ºC degree jacket listing• 88% power efficiency• 100W PoE support• CMP plenum rated• Low temperature rise in 192 cable bundles• Proudly manufactured in the U.S.
Rele
ased
Jan
uary
201
8 A
18 7
096
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
BERK-TEK CABLE PLENUM REEL IN BOX
LANmark-IP Cable, Blue 11098078
LANmark-IP Cable, White 11098079
LANmark-IP Cable, Grey 11098080
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 5EUJK connectors ˆ = For consolidation point, legs are non-removable and not sold separately xx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Green (G), Grey (S)
LEVITON CONNECTORS STANDARD SHUTTERED ADDITIONAL ICONSAtlas-X1 Cat 5e Component-Rated QuickPort Connector 5EUJK-R*5 5EUJK-S*5 ICONS-IC*LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORTCat 5e Flat 110-Style Patch Panel 5G596-U24 5G596-U48Cat 5e Angled 110-Style Patch Panel 5G597-U24 5G597-U48Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR110-Style Wiring Block, wall mount w/legs and C-4 clipsˆ 41AB2-1F4LEVITON PATCH CORDSAtlas-X1 Cat 5e SlimLine Patch Cord 5D560-xx°
Please see individual spec sheets at Leviton.com or BerkTek.com for PoE bundle size requirements.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
UP1000 | ULTRA-HIGH PoE 1G SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FORLow-bandwidth high-power applications such as LED light fixture, sensors, security systems, automation, and building management
1000BASE-T network applications and mission-critical systems
PoE standards: IEEE 802.3af, 802.3at, 802.3bt, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
PoE delivery up to 140 watts, 0.7A per conductor at 30C
Federal, state, and municipal projects funded by ARRA^
GHIGH PoEULTRA-
SYSTEM DATA SHEET
UP1000 | ULTRA-HIGH PoE 1G SYSTEM Industry’s first 1G system with 140-watt PoE delivery capability, featuring the GigaMax® jack and 22-gauge LANmark™-IP cable, offers superior performance for ultra high-power PoE applications
• Exceeds ANSI/TIA-568.2-D Cat 5e and ISO/IEC 11801 Class D requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Engineered to maximize heat dissipation and support PoE up to 140 watts
• Specifically designed for intelligent building and LED lighting applications that require more than 100W PoE
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Will exceed IEEE 802.3bt Standard up to 0.7 amps (140 watts) continuously
• Increases network efficiency and uptime with lower bit error rates
SYSTEM TOPOLOGY
3m 75m 15m 5m
A A A A
2m
A ED B DBB C C C
NEAR END FAR END
A B C D E
CableLANmark™-IP
Jack5G108-R*5
Field-Terminated Plug 6APLG-S6A
Patch Panel49255-H48
Consolidation Point 41AB2-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
UP1000 | ULTRA-HIGH PoE 1G SYSTEM BerkTekLevitonTechnologies.com
LEVITON PATCH PANELS QUICKPORT PATCH PANELS• Accepts all QuickPort jacks to maximize versatility
with a variety of media applications • Available in QuickPort flat, angled, recessed angled,
and recessed flat configurations • Magnifying lens on some models ensures visibility of port labels• Angled design allows cords to route directly into vertical managers,
saving rack space by eliminating horizontal management
LEVITON PLUG UNIVERSAL TOOL-FREE PLUG• To be terminated on LANmark™-IP CABLE• Easy field termination without special tools• Robust die-cast housing provides durability and shielding benefits• Shielding provides EMI/RFI protection and signal isolation• 360° shield housing provides secure data transmission• Long release latch ensures easy insertion and removal
in confined spaces• UL2043 Plenum Certified• Will exceed IEEE 802.3bt Standard up to 0.7 amps
(140 watts) continuously
BERK-TEK CABLELANMARK™-IP CABLE • 22 gauge copper conductors• LP rated for power up to 140 watts, 0.7A per conductor at 30C• All FEP primary insulation• 105ºC jacket listing• 88% power efficiency at 100 watts PoE• CMP plenum rated• Low temperature rise in 192 cable bundles• Proudly manufactured in the U.S.
Rele
ased
Jan
uary
201
9
A19
749
1
BERK-TEK CABLE PLENUM REEL IN BOX
LANmark-IP Cable, Blue 11098078
LANmark-IP Cable, White 11098079
LANmark-IP Cable, Gray 11098080
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Gray (G), Black (E), Brown (B) + = Sold empty, load with 5G108 jacks ˆ = For consolidation point, legs are non-removable and not sold separately
LEVITON JACKS 1-PACK 25-PACK 150-PACK
GigaMax Cat 5e QuickPort Jack 5G108-R*5 5G108-B*5 5G108-J*5
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
110-Style Wiring Block, wall mount w/legs and C-4 clipsˆ 41AB2-1F4
LEVITON PLUG
Universal Tool-Free Plug 6APLG-S6A
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON JACKSGIGAMAX® CAT 5E CHANNEL-RATED QUICKPORT® JACKS• Meet requirements for Category 5e described in ANSI/TIA-568.2-D
and Class D requirements described in ISO/IEC 11801• Robust one-piece lead-frame design increases power-carrying
capacity and efficiency, while providing improved durability• Dual wiring code label supports T568A or T568B wiring• Narrow jack allows high port density in a small area• Will exceed IEEE 802.3bt Standard up to 0.7 amps
(140 watts) continuously• Proudly manufactured in the U.S.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX5000 | CAT 5E UTP STANDARD SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FOR1000BASE-T network applications
Horizontal data and voice applications
Networks with low bandwidth utilization requirements
PoE standards: IEEE 802.3af, 802.3at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
Small office, home office, and multiple dwelling units
Rele
ased
May
201
8
E
18 6
574A
BI
BERK-TEK CABLEHYPER PLUS CAT 5E CABLE• Small, round design for easy installation and reduced
maintenance costs• 1,500 ft. smartPAK packaging option reduces waste and
increases installation efficiency• 1,000 ft. TekPak option provides for compact storage• Lower bit error rates increase network efficiency and uptime• Outer diameter 0.210" (5.33 mm), CMP• Riser, plenum, and OSP-rated cables available• UL Listed• 24-gauge copper wire• ETL verified to ANSI/TIA-568-C.2 Category 5e• Proudly manufactured in the U.S.
LEVITON CONNECTORSGIGAMAX® CAT 5E CHANNEL-RATED QUICKPORT® CONNECTORS• Meet requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• Robust one-piece lead-frame design• Dual wiring code label supports T568A or T568B wiring• Narrow connector allows high port density in a small area• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 5E 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• Available in 110-Style and QuickPort flat, angled, recessed angled,
recessed, and Zero-U configurations in 12-96 port counts• Individual port configurability allows specification flexibility• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS GIGAMAX CAT 5E STANDARD PATCH CORDS• ETL Verified for TIA Cat 5e channel requirements• 24-gauge stranded for maximum flexibility and extended flex life• Nominal outer diameter of .22" reduces cable pathway congestion • Rubber boot to protect plug
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
SYSTEM DATA SHEET
CX5000 | CAT 5E STANDARD UTP SYSTEM Standard Cat 5e solution offers channel-rated performance at a good value
• Meets ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements for cabling systems performance to support IEEE 1000BASE-T networks
• Third-party verified by Intertek Testing Services (ETL)
• The system with the lowest total cost of ownership for Cat 5e technology
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
BERK-TEK CABLE PLENUM SMARTPAK
PLENUM TEKPAK
RISER SMARTPAK
RISER TEKPAK
Hyper Plus Cat 5e Cable, Blue 11074705 10032227 11074706 10032528
Hyper Plus Cat 5e Cable, White 11074746 10032223 11074748 10032535
Hyper Plus Cat 5e Cable, Grey 11074747 10032207 11074749 10032510
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 5G108 connectors xx = Length: 3, 5, 7, 10 feet o = Color: White (W), Yellow (Y), Blue (L), Green (G), Grey (S)
LEVITON CONNECTORS
GigaMax Cat 5e Channel-Rated QuickPort Connector 5G108-R*5
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 5e Flat 110-Style Patch Panel 5G596-U24 5G596-U48
Cat 5e Angled 110-Style Patch Panel 5G597-U24 5G597-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON PATCH CORDS
GigaMax Cat 5e Standard Patch Cord 5G460-xxo
GIGAMAX CAT 5E UTP SYSTEM Leviton.com/GigaMax
RECOMMENDED FOR1000BASE-T network applications
Horizontal data and voice applications
Networks with low bandwidth utilization requirements
PoE standards: IEEE 802.3af, 802.3at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
Small office, home office, and multiple dwelling units
CABLECAT 5E UTP CABLE, CM• Supports 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet• Independently tested and verified to exceed ANSI/TIA-568-C.2
Cat 5e, IEEE 802.3 1000BASE-T, and ISO/IEC 11801-1 Class D standards
• Supports IEEE 802.3af (PoE) and 802.3at (PoE+) applications• Available in CM cable jacket
SYSTEM DATA SHEET — INTERNATIONAL
GIGAMAX® CAT 5E UTP SYSTEM • Meets ISO/IEC 11801-1 Class D and ANSI/TIA-568-C.2 Cat 5e requirements for cabling systems
performance to support IEEE 1000BASE-T networks
• Third-party verified by Intertek Testing Services (ETL)
• The system with the lowest total cost of ownership for Cat 5e technology
CABLE CANADA LATIN AMERICA AFRICA MIDDLE EAST INDIA KOREA ASIA
Cat 5e UTP Cable, CM, Blue~ 290-UTP5M-MLB 290-UTP5M-MLB 290-UTP5M-MLB 290-UTP5M-MLB 290-UTP5M-MLB 290-UTP5M-MLB
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 5G108 connectors xx = Length: 3 (03), 5 (05), 7 (07), 10 (10) feet o = Color: White (W), Yellow (Y), Blue (L), Green (G), Grey (S) ~ = Sold in 305-meter box, additional colors available, please visit Leviton.com/cable for details
Standard Cat 5e solution offers channel-rated performance at a good value
CONNECTORSGIGAMAX® CAT 5E CHANNEL-RATED QUICKPORT® CONNECTORS• Meet requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801-1• Robust one-piece lead-frame design• Dual wiring code label supports T568A or T568B wiring• Narrow connector allows high port density in a small area• Proudly manufactured in the U.S.
PATCH PANELS CAT 5E 110-STYLE AND QUICKPORT PATCH PANELS• 110-style patch panels exceed requirements for Category 5e
described in ANSI/TIA-568-C.2 and Class D requirements described in ISO/IEC 11801-1
• Available in 110-Style and QuickPort flat, angled, recessed angled, recessed, and Zero-U configurations in 12-96 port counts
• Individual port configurability allows specification flexibility• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
PATCH CHORDS GIGAMAX CAT 5E STANDARD PATCH CORDS• ETL Verified for TIA Cat 5e channel requirements• 24-gauge stranded for maximum flexibility and extended flex life• Nominal outer diameter of 5.6 mm (.22") reduces cable pathway
congestion • Rubber boot to protect plug
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
CONNECTORS
GigaMax Cat 5e Channel-Rated QuickPort Connector 5G108-R*5
PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 5e Flat 110-Style Patch Panel 5G596-U24 5G596-U48
Cat 5e Angled 110-Style Patch Panel 5G597-U24 5G597-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
PATCH CORDS
GigaMax Cat 5e Standard Patch Cord 5G460-xxo
Rele
ased
May
201
8
E
18 6
574B
BI
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX5150 | CAT 5E ENHANCED+ UTP SYSTEM BerkTekLevitonTechnologies.com
GUARANTEED* SYSTEM PERFORMANCE
CX5150 | CAT 5E ENHANCED+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
10% 8 dB 10 dB 11 dB 12 dB 6 dB 10 dB 12 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX5150 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A CB C E A
2m
A DB
NEAR END FAR END
A B C D E
Patch Cord 5D560-xx°
Patch Panel5G596-U48
CableLANmark™-350
Consolidation Point 41AB2-1F4
Connector 5G110-R*5
RECOMMENDED FOR1000BASE-T network application
Horizontal data and voice applications
Networks with high bandwidth utilization requirements
Federal, state, and municipal projects funded by ARRA
Large enterprises
PoE standards: IEEE 802.3af, 802.at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
^See Leviton website for product specific ARRA eligibility details
SYSTEM DATA SHEET
CX5150 | CAT 5E ENHANCED+ UTP SYSTEM Enhanced+ Cat 5e performance with the advantage of LANmark-350TM cable and component-rated connectivity
• Exceeds ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Third-party verified by Intertek Testing Services (ETL)
• Increases network efficiency and uptime with lower bit error rates
• Independently verified margin ensures consistent performance
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX5150 | CAT 5E ENHANCED+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSEXTREME® CAT 5E COMPONENT-RATED QUICKPORT® CONNECTORS• Exceed requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• Patented Retention Force Technology protects tines from
damage and increases system longevity• Circuit board technology for high-frequency operation• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Pair Separation Tower design facilitates separation of conductors and minimizes untwisting
• Patented dual-layer wiring label simplifies punchdown and reduces rework
• 90 or 180 degree bi-directional entry eases cable bend radius in back boxes
• Supports Power over Ethernet (PoE) — see individual product specifications sheets for full capabilities
• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 5E 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• Available in 110-Style and QuickPort flat, angled, recessed angled,
recessed, and Zero-U configurations in 12-96 port counts• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1™ CAT 5E SLIMLINE PATCH CORDS• ETL Verified for TIA Cat 5e component requirements • 24-gauge stranded for maximum flexibility and extended flex life• Nominal outer diameter of .224" to reduce cable pathway
congestion in racks and cabinets • SlimLine boot supports high-density patching
and easy extraction with extended-reach latch release • Made-to-order custom lengths are available • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM - 350 CABLE • Small, round design for easy installation and reduced
maintenance costs• 1,500 ft. smartPAK packaging option reduces waste
and increases installation efficiency• Lower bit error rates increase network efficiency and uptime• Outer diameter for CMP of 0.207" (5.25 mm)• UL/ETL Listed• ETL LANmark Verified beyond standard performance• 24 gauge• Proudly manufactured in the U.S.
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON CONNECTORS
eXtreme Cat 5e Component-Rated QuickPort Connector 5G110-R*5
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 5e Flat 110-Style Patch Panel 5G596-U24 5G596-U48
Cat 5e Angled 110-Style Patch Panel 5G597-U24 5G597-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
110-Style Wiring Block, wall mount w/legs and C-4 clipsˆ 41AB2-1F4
LEVITON PATCH CORDS
Atlas-X1 Cat 5e SlimLine Patch Cord 5D560-xx°
BERK-TEK CABLE PLENUM 1500' SMARTPAK
PLENUM 1000’ TEKPAK
RISER 1500’ SMARTPAK
RISER 1000’ TEKPAK
LANmark-350 Cable, Blue 11074707 10032065 11074708 10032426
LANmark-350 Cable, White 11074750 10032072 11074752 10032434
LANmark-350 Cable, Grey 11074751 10032079 11074753 10032447
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 5G110 connectors ˆ = For consolidation point, legs are non-removable and not sold separately xx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Green (G), Grey (S)
Rele
ased
Jun
e 20
17
F17
678
6
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX5200 | CAT 5E PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FOR1000BASE-T network applications and mission-critical systems
Horizontal data and voice applications
Networks with high bandwidth utilization requirements
Large enterprises
PoE standards: IEEE 802.3af, 802.at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
Federal, state, and municipal projects funded by ARRA^
^See Leviton website for product specific ARRA eligibility details
SYSTEM DATA SHEET
CX5200 | CAT 5E PREMIUM+ UTP SYSTEM Our best Cat 5e system features the Atlas-X1™ connector and LANmark™-350 premium cabling
• Exceeds ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Third-party verified by Intertek Testing Services (ETL)
• Increases network efficiency and uptime with lower bit error rates
• Independently verified margin ensures consistent performance
• Offer highest margin guarantees for any Cat 5e system on the market
GUARANTEED* SYSTEM PERFORMANCECX5200 | CAT 5E PREMIUM+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
10% 9 dB 11 dB 11 dB 13 dB 6 dB 11 dB 13 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 5e and ISO/IEC 11801 Class D requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX5200 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A EB E A
2m
A FC D CD
NEAR END FAR END
A B C D E F
Patch Cord 5D560-xx°
Patch Panel5G596-U48
Patch Panel49255-H48
Connector 5EUJK-R*5
CableLANmark™-350
Consolidation Point 41AB2-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX5200 | CAT 5E PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 5E COMPONENT-RATED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between plug and connector, preventing arcing from intermittent disconnects in PoE applications
• PoE optimized tine geometry prevents arcing damage where plug and connector make contact, extending the life of the connector and ensuring maximum performance (see specification sheets for full PoE capabilities)
• Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications
• Available with internal shutter to protect from dust and debris• Unique, tool-free design requires no specialized termination
or re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Includes interchangeable color-coded icons for identification
(VOICE, DATA, AV, blank), also offered separately in 13 colors• Supports Power over Ethernet (PoE) — see individual product
specifications sheets for full capabilities• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 5E 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 5e described in ANSI/TIA-568-C.2
and Class D requirements described in ISO/IEC 11801• 110-Style available in flat and angled• QuickPort available in flat, angled, recessed, and Zero-U configurations• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1 CAT 5E SLIMLINE PATCH CORDS• ETL Verified for TIA Cat 5e component requirements • 24-gauge stranded for maximum flexibility and extended flex life• Nominal outer diameter of .22" to reduce cable pathway
congestion in racks and cabinets • SlimLine boot supports high-density patching
and easy extraction with extended-reach latch release • Made-to-order custom lengths are available• Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARK™ - 350 CABLE • Small, round design for easy installation and reduced
maintenance costs• 1,500 ft. smartPAK packaging option reduces waste
and increases installation efficiency• Lower bit error rates increase network efficiency and uptime• Outer diameter for CMP of 0.207" (5.25 mm)• UL/ETL Listed• ETL LANmark Verified beyond standard performance• 24 gauge• Proudly manufactured in the U.S.
Rele
ased
May
201
8
E18
657
6A
B
IE
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
BERK-TEK CABLE PLENUM 1500' SMARTPAK PLENUM 1000’ TEKPAK RISER 1500’ SMARTPAK RISER 1000’ TEKPAKLANmark-350 Cable, Blue 11074707 10032065 11074708 10032426LANmark-350 Cable, White 11074750 10032072 11074752 10032434LANmark-350 Cable, Grey 11074751 10032079 11074753 10032447* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 5EUJK connectors ˆ = For consolidation point, legs are non-removable and not sold separately xx = Length: 3, 5, 7, 10, 15, 20 feet o = Color: White (W), Yellow (Y), Blue (L), Green (G), Grey (S)
LEVITON CONNECTORS STANDARD SHUTTERED ADDITIONAL ICONSAtlas-X1 Cat 5e Component-Rated QuickPort Connector 5EUJK-R*5 5EUJK-S*5 ICONS-IC*LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORTCat 5e Flat 110-Style Patch Panel 5G596-U24 5G596-U48Cat 5e Angled 110-Style Patch Panel 5G597-U48Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR110-Style Wiring Block, Wall Mount with Legs and C-4 Clipsˆ 41AB2-1F4LEVITON PATCH CORDSAtlas-X1 Cat 5e SlimLine Patch Cord 5D560-xxo
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
AV6400 | 1 Gb/s AV SHIELDED SYSTEM BerkTekLevitonTechnologies.com
• Excellent choice for for transmitting uncompressed HD video via HDBaseT™
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• LANmark™-HD cable is an HDBaseT Alliance recommended cable
• Provides bandwidth required for multimedia video, HD video, and other future applications
• Provides additional performance margin to reliably support Gigabit Ethernet in high-noise environments
• Excellent EMI/RFI immunity
• Atlas-X1™ jack is independently tested to exceed performance standards and features an innovative design that allows for tool-free terminations
RECOMMENDED FOR1 Gb/s AV applications and where high definition (HD) resolution is required
AV applications requiring low latency and 1 Gb/s bandwidth
PoE standards: IEEE 802.3af, 802.3at, 802.3bt, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Shield provides excellent signal isolation and and allows for efficient heat dissipation when powering large displays
An excellent choice for AV systems used in high-end conference rooms and classrooms
AV SHIELDED
SYSTEM DATA SHEET
AV6400 | 1 Gb/s AV SHIELDED SYSTEMShielded Cat 6 performance provides exceptional high definition (HD) AV performance
SYSTEM ELEMENTS
90m
D C
5m
AB C
5m
A
NEAR END FAR END
SW
TIC
H
A B C D
Patch Cord 6S560-xxS
Patch Panel4S255-S24
Jack61SJK-R*6
CableLANmark-HD F/UTP
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
AV6400 | 1 Gb/s AV SHIELDED SYSTEM BerkTekLevitonTechnologies.com
Rele
ased
Jan
uary
201
9
A19
752
2
BERK-TEK CABLELANMARKTM-HD HIGH DEFINITION AV CABLE • HDBaseT™ Alliance recommended cable• Developed specifically to support high definition AV applications
supporting 1 Gb/s and requiring low latency• Lower bit errors resulting in increased AV performance• ETL Verified to ANSI/TIA-568-C.2 Category 6• Outer diameter plenum 0.275" (7.0 mm), CMP• Outer diameter riser 0.280" (7.1 mm), CMR• UL/ETL Listed• 23 gauge• Offers superior PoE performance with the latest 802.3bt
standard (90W)• Proudly manufactured in the U.S.
BERK-TEK CABLE PLENUM REEL RISER REELLANmark-HD Cat 6A F/UTP Cable, Blue 11100942 11100946LANmark-HD Cat 6A F/UTP Cable, White 11100943 11100947LANmark-HD Cat 6A F/UTP Cable, Gray 11100944 11100948* = Jack Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Gray (G), Black (E), Brown (B) + = Sold empty, load with 61SJK jacks xx = Length: 3, 5, 7, 10, 15, 20 feet
LEVITON JACKS STANDARD WITH SHUTTER ADDITIONAL ICONS
Atlas-X1 Cat 6 Shielded QuickPort Jack 61SJK-R*6 61SJK-S*6 ICONS-IC*
LEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT
Atlas-X1 Flat Shielded QuickPort Patch Panel+ 4S255-S24 4S255-D48 4S255-S48
Atlas-X1 Angled Shielded QuickPort Patch Panel+ 4S256-S24 4S256-D48 4S256-S48
LEVITON PATCH CORDS
Atlas-X1 Cat 6 SlimLine Shielded Patch Cord, Gray 6S560-xxS
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON PATCH PANELS ATLAS-X1 SHIELDED QUICKPORT PATCH PANELS• Meet ANSI/TIA-568.2-D and ISO/IEC 11801• Stainless-steel “comb” maintains consistent ground path
between jack and panel• Available in QuickPort 1RU 24-port, 1RU 48-port, and 2RU
48-port angled configurations • Accepts all shielded QuickPort jacks• Shielding protects against Electromagnetic Interference (EMI)
and Radio Frequency Interference (RFI), and provides excellent alien crosstalk (AXT) suppression
LEVITON JACKSATLAS-X1™ CAT 6 SHIELDED QUICKPORT® JACKS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology™ protects against
tine damage and maintains contact force between plug and jack, preventing arcing from intermittent disconnects in PoE applications
• PoE optimized tine geometry prevents arcing damage where plug and jack make contact, extending the life of the jack and ensuring maximum performance (see specification sheets for full PoE capabilities)
• Provide additional EMI/RFI protection, signal isolation, and alien crosstalk (AXT) suppression
• Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications
• Available with internal shutter to protect from dust and debris• Unique tool-free design requires no specialized termination
or re-termination tool• Short jack design supports a wider range of applications (e.g.
shallow boxes, enclosures, bend radius, etc.)• Includes interchangeable color-coded icons for identification
(VOICE, DATA, AV, blank), also offered separately in 13 colors• Proudly manufactured in the U.S.
LEVITON PATCH CORDS ATLAS-X1 CAT 6 SLIMLINE SHIELDED PATCH CORDS• Tested and verfied to meet TIA Cat 6 component requirements • 26-gauge stranded for maximum flexibility in any density
patching environment • Nominal outer diameter of .24" to reduce cable pathways
in racks and cabinets • Aluminum tape foil shield covers all four pairs • Drain wire is made of 24-gauge (.51 mm) tinned copper • SlimLine boot supports high-density patching applications• Provides excpetional EMI/RFI protection• Country of Origin is U.S., manufactured using Berk-Tek cable
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CS6100 | CAT 6 SHIELDED SYSTEM BerkTekLevitonTechnologies.com
• Exceeds ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Error-free performance up to 1 Gigabit Ethernet with full duplex transmission
• Guaranteed cable balance improves overall performance and reduces emissions which results in reduced transmission errors
• Provides additional performance margin to reliably support Gigabit Ethernet in high-noise environments
• Excellent EMI/RFI immunity
• Third-party verified by Intertek Testing Services (ETL)
• Provides bandwidth required for multimedia, broadband video, analog video, and other future applications
• The highest performing Cat 6 shielded system to deliver guaranteed return on investment
• Atlas-X1™ connector is independently tested to exceed performance standards and features an innovative design that allows for tool-free terminations
RECOMMENDED FOR1000BASE-T network applications and mission-critical systems
Network applications where EMI/RFI may be present and data security is critical
Network applications in data center, financial, health care, government, transportation, and education environments
PoE standards: IEEE 802.3af, 802.3at, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Government encrypted systems
AV systems for high-end conference rooms and classrooms
SYSTEM DATA SHEET
CS6100 | CAT 6 SHIELDED SYSTEMShielded Cat 6 performance provides exceptional headroom above standards with a high level of security for sensitive networks
GUARANTEED* SYSTEM PERFORMANCECS6100 | CAT 6 SHIELDED SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
2% 5 dB 6 dB 5 dB 6 dB 2 dB 6 dB 7 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CS6100 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM ELEMENTS
3m 75m
A D
2m
A C BCB
5m
A
15m
DCB B
NEAR END FAR END
A B C D
Patch Cord 6S560-xxS
Connector61SJK-R*6
Patch Panel4S255-S24
CableLANmark™-6 FTP
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CS6100 | CAT 6 SHIELDED SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 6 SHIELDED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between plug and connector, preventing arcing from intermittent disconnects in PoE applications
• PoE optimized tine geometry prevents arcing damage where plug and connector make contact, extending the life of the connector and ensuring maximum performance (see specification sheets for full PoE capabilities)
• Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications
• Available with internal shutter to protect from dust and debris• Unique tool-free design requires no specialized termination
or re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Includes interchangeable color-coded icons for identification
(VOICE, DATA, AV, blank), also offered separately in 13 colors• Proudly manufactured in the U.S.
LEVITON PATCH PANELS ATLAS-X1 CAT 6 SHIELDED PATCH PANELS • Available in QuickPort 24-port and 48-port flat or angled configurations • Stainless-steel surface for improved grounding
and oxidation resistance • Meet ANSI/TIA-568-C.2 and ISO/IEC 11801• Stainless-steel “comb” maintains consistent ground path
between connector and panel• Accepts all shielded QuickPort connectors
LEVITON PATCH CORDS ATLAS-X1 CAT 6 SLIMLINE SHIELDED PATCH CORDS• ETL Verified for TIA Cat 6 component requirements • 26-gauge stranded for maximum flexibility in any density
patching environment • Nominal outer diameter of .24" to reduce cable pathways
in racks and cabinets • Aluminum tape foil shield covers all four pairs • Drain wire is made of 24-gauge (.51 mm) tinned copper • SlimLine boot supports high-density patching applications• Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARK™ - 6 FTP CABLE• The first independently verified Category 6 F/UTP cable• Increased signal isolation prevents contaminant noise from
entering cabling system • Lower bit errors resulting in increased network performance • ETL Verified to ANSI/TIA-568-C.2 Category 6 • Outer diameter 0.285" (7.24mm), CMP • Superior balance characteristics protect networks from the
damaging effects of outside noise sources• UL/ETL Listed• 23 gauge• Proudly manufactured in the U.S.
LEVITON CONNECTORS STANDARD SHUTTERED ADDITIONAL ICONS
Atlas-X1 Cat 6 Shielded QuickPort Connector 61SJK-R*6 61SJK-S*6 ICONS-IC*
LEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT
Atlas-X1 Flat Shielded QuickPort Patch Panel+ 4S255-S24 4S255-D48 4S255-S48
Atlas-X1 Angled Shielded QuickPort Patch Panel+ 4S256-S24 4S256-D48 4S256-S48
LEVITON PATCH CORDS
Atlas-X1 Cat 6 SlimLine Shielded Patch Cord, Grey 6S560-xxS Rele
ased
Dec
embe
r 201
8
L18
750
1A
B
IE
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
BERK-TEK CABLE PLENUM REEL RISER REEL
LANmark-6 FTP Cable, Grey 10057903 10070439
LANmark-6 FTP Cable, Red 10063671 10074211
LANmark-6 FTP Cable, Black 10063672 10074212
* = Connector Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 61SJK connectors xx =Length: 3, 5, 7, 10, 15, 20 feet
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6000 | CAT 6 STANDARD UTP SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FOR1000BASE-T network applications
Applications requiring compact, high-density design and reduced cable outer diameter
Network applications in financial, health care, government, transportation, and education environments
Networks with high bandwidth utilization requirements
PoE standards: IEEE 802.3af, 802.3at, and Cisco UPoE up to 60 watts
Emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
AV systems for high-end conference rooms and classrooms
Standard Cat 6 solution features LANmarkTM-6 cable and offers solid performance and value
• Exceeds ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements for cabling systems performance to support IEEE 1000BASE-T networks
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Error-free performance up to 1 Gigabit Ethernet with full duplex transmission
• Third-party verified by Intertek Testing Services (ETL)
• Cost-effective standard Cat 6 solution
3m 75m 15m 5m
A CB C E A
2m
A DB
NEAR END FAR END
A B C D E
Patch Cord 6D460-xx°
Patch Panel69586-U48
CableLANmark™-6
Consolidation Point 41AB6-1F4
Connector 61110-R*6
SYSTEM TOPOLOGY
SYSTEM DATA SHEET
CX6000 | CAT 6 STANDARD UTP SYSTEM
GUARANTEED* SYSTEM PERFORMANCECX6000 | CAT 6 STANDARD UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
2% 2 dB 2 dB 2 dB 2 dB 2 dB 2 dB 2 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6000 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6000 | CAT 6 STANDARD UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSEXTREME® CAT 6 COMPONENT-RATED QUICKPORT® CONNECTORS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between plug and connector, preventing arcing from intermittent disconnects in PoE applications
• Circuit board technology for exceptional high-frequency operation• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Pair Separation Tower design facilitates separation of conductors and minimizes untwisting
• Patented dual-layer wiring label simplifies punchdown and reduces rework
• 90 or 180 degree bi-directional entry eases cable bend radius in back boxes
• Proudly manufactured in the U.S.
LEVITON PATCH PANELS EXTREME CAT 6 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Independently tested and verified by Intertek (ETL) to meet all
TIA component, permanent link, and channel requirements• 110-Style available in flat and angled• QuickPort available in flat, angled, recessed, and Zero-U configurations• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include colour codes for T568A/B wiring schemes
LEVITON PATCH CORDS EXTREME CAT 6 SLIMLINE UTP PATCH CORDS• Verified by ETL for TIA Category 6 component requirements • 24-gauge stranded for maximum flexibility • Nominal outer diameter of .22" to reduce cable pathways
in racks and cabinets • SlimLine boot supports high-density patching and extraction
with extended-reach latch release • Made-to-order custom lengths are quickly available for
top-of-rack, end-of-row, or general network patching
BERK-TEK CABLELANMARK™ - 6 CABLE • Unique fillerless design reduces diameter to near Cat 5e
dimensions for easy installation (0.224" OD for CMP)• Provides additional usable bandwidth for future applications• ETL LANmark Verified beyond ANSI/TIA-568-C.2
Category 6 performance• Independently verified headroom guarantees ensure
consistent performance• 1,500 ft. smartPAK packaging option reduces waste
and increases installation efficiency• Delivered in compact, strong, easy-to-identify boxes• UL/ETL Listed• 24 gauge• Proudly manufactured in the U.S.
Rele
ased
May
201
8
E18
657
7A
B
IE
BERK-TEK CABLE PLENUM 1500' SMARTPAK PLENUM 1000’ TEKPAK RISER 1500’ SMARTPAK RISER 1000’ TEKPAK
LANmark-6 Cable, Blue 11074702 10136226 11074703 10136339
LANmark-6 Cable, White 11074742 10136230 11074744 10136340
LANmark-6 Cable, Grey 11074743 10132983 11074745 10136338
LEVITON CONNECTORS
eXtreme Cat 6 Component-Rated QuickPort Connector 61110-R*6
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 6 Flat 110-Style Patch Panel 69586-U24 69586-U48
Cat 6 Angled 110-Style Patch Panel 69587-U24 69587-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
Cat 6 110-Style Wiring Block, Wall Mount with Legs and C-4 Clipsˆ 41AB6-1F4
LEVITON PATCH CORDS
eXtreme Cat 6 SlimLine UTP Patch Cord 6D460-xxo
* = Colour: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 61110 connectors ˆ = For consolidation point. Legs are non-removable and not sold separately xx = Length: 3, 5, 7, 10, 15, 20 feet o = Colour: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S)
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6050 | CAT 6 STANDARD+ UTP SYSTEM BerkTekLevitonTechnologies.com
SYSTEM DATA SHEET
CX6050 | CAT 6 STANDARD+ UTP SYSTEM Standard+ Cat 6 performance, featuring LANmarkTM-6 cable, offers solid performance and value
• Exceeds ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements for performance to support IEEE 1000BASE-T networks
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Error-free performance up to 1 Gigabit Ethernet with full duplex transmission
• Third-party verified by UL
• Cost-effective standard Cat 6 solution
GUARANTEED* SYSTEM PERFORMANCE
CX6050 | CAT 6 STANDARD+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
3% 3 dB 3 dB 3 dB 5 dB 2 dB 3 dB 5 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6050 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TEST REPORT TOPOLOGY
RECOMMENDED FOR1000BASE-T network applications running at 1 Gigabit speeds
Applications requiring compact, high-density design and reduced OD
Network applications in financial, health care, government, transportation, and education environments
Supports IEEE 802.3af, 802.3at, and Cisco UPoE up to 60 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, up to 60 watts
Networks with high bandwidth utilization requirements
Federal, state, and municipal projects funded by ARRA
AV systems for high-end conference rooms and classrooms3m 75m 15m 5m
A CB C E A
2m
A DB
NEAR END FAR END
A B C D E
Patch Cord 6D560-xx°
Patch Panel69586-U48
CableLANmark™-6
Consolidation Point 41AB6-1F4
Connector 61110-R*6
^See Leviton website for product specific ARRA eligibility details
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6050 | CAT 6 STANDARD+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSEXTREME® CAT 6 COMPONENT-RATED QUICKPORT® CONNECTORS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Patented Retention Force Technology protects tines from
damage and increases system longevity• Circuit board technology for exceptional high-frequency operation• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Pair Separation Tower design facilitates separation of conductors and minimizes untwisting
• Patented dual-layer wiring label simplifies punchdown and reduces rework
• 90 or 180 degree bi-directional entry eases cable bend radius in back boxes
• Supports Power over Ethernet (PoE) — see individual product specifications sheets for full capabilities
• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 6 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Available in 110-Style and QuickPort flat, angled, recessed angled,
recessed, and Zero-U configurations in 12-96 port counts• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1™ CAT 6 SLIMLINE UTP PATCH CORDS• Verified by ETL for TIA Category 6 component requirements • 24-gauge stranded for maximum flexibility • Nominal outer diameter of .224" to reduce cable pathways
in racks and cabinets • SlimLine boot supports high-density patching and extraction
with extended-reach latch release • Made-to-order custom lengths are quickly available for
top-of-rack, end-of-row, or general network patching • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM - 6 CABLE • Unique fillerless design reduces diameter to approaching Cat
5e dimensions for easy installation (0.224" OD for CMP)• Provides additional usable bandwidth for future applications• ETL LANmark Verified beyond ANSI/TIA-568-C.2
Category 6 performance• Independently verified headroom guarantees ensure
consistent performance• 1,500 ft. smartPAK packaging option reduces waste
and increases installation efficiency• Delivered in compact, strong, easy-to-identify boxes• UL/ETL Listed• 24 gauge• Proudly manufactured in the U.S.
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON CONNECTORS
eXtreme Cat 6 Component-Rated QuickPort Connector 61110-R*6
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 6 Flat 110-Style Patch Panel 69586-U24 69586-U48
Cat 6 Angled 110-Style Patch Panel 69587-U24 69587-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
Cat 6 110-Style Wiring Block, wall mount w/legs and C-4 clipsˆ 41AB6-1F4
LEVITON PATCH CORDS
Atlas-X1 Cat 6 SlimLine UTP Patch Cord, U.S. made 6D560-xx°
BERK-TEK CABLE PLENUM 1500' SMARTPAK
PLENUM 1000’ TEKPAK
RISER 1500’ SMARTPAK
RISER 1000’ TEKPAK
LANmark-6 Cable, Blue 11074702 10136226 11074703 10136339
LANmark-6 Cable, White 11074742 10136230 11074744 10136340
LANmark-6 Cable, Grey 11074743 10132983 11074745 10136338
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 61110 connectors ˆ = For consolidation point. Legs are non-removable and not sold separately xx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S)
Rele
ased
Oct
ober
201
6 J1
6 6
401
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6150 | CAT 6 ENHANCED+ UTP SYSTEM BerkTekLevitonTechnologies.com
SYSTEM DATA SHEET
CX6150 | CAT 6 ENHANCED+ UTP SYSTEMEnhanced+ Cat 6 performance featuring LANmarkTM-1000 cable and eXtreme® Cat 6 component-rated connectivity
• Exceeds ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Error-free performance up to 1 Gigabit Ethernet with full duplex transmission
• Provides additional performance margin to reliably support Gigabit Ethernet in high-noise environments
• Third-party verified by Intertek Testing Services (ETL)
• Provides bandwidth required for multimedia, broadband video, analog video, and other future applications
• Guaranteed cable balance improves overall performance and reduces emissions which results in reduced transmission errors
GUARANTEED* SYSTEM PERFORMANCECX6150 | CAT 6 ENHANCED+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
5% 6 dB 6 dB 8 dB 9 dB 3 dB 8 dB 9 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6150 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TEST REPORT TOPOLOGY
RECOMMENDED FOR
Applications requiring optimal support for 1000BASE-T Ethernet with headroom
Network applications in data center, financial, health care, government, transportation, and education environments
Networks with high bandwidth utilization requirements
Federal, state, and municipal projects funded by ARRA^
PoE standards: IEEE 802.3af, 802.at, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Any IP-based system requiring UTP cabling
Analog security applications using UTP cable
AV systems for high-end conference rooms and classrooms
3m 75m 15m 5m
A D
2m
A C BCB D AE B
NEAR END FAR END
A B C D E
Patch Cord 6D560-xx°
Connector 61110-R*6
Patch Panel 49255-H48
Cable LANmark™-1000
Consolidation Point 41AB6-1F4
^See Leviton website for product specific ARRA eligibility details
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6150 | CAT 6 ENHANCED+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSEXTREME® CAT 6 COMPONENT-RATED QUICKPORT® CONNECTORS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Patented Retention Force Technology protects tines from
damage and increases system longevity• Circuit board technology for exceptional high-frequency operation• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Pair Separation Tower design facilitates separation of conductors and minimizes untwisting
• Patented dual-layer wiring label simplifies punchdown and reduces rework
• 90 or 180 degree bi-directional entry eases cable bend radius in back boxes
• Supports Power over Ethernet (PoE) — see individual product specifications sheets for full capabilities
• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 6 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Independently tested and verified by Intertek (ETL) to meet all
TIA component, permanent link, and channel requirements• Available in 110-Style and QuickPort flat, angled, recessed angled,
recessed, and Zero-U configurations in 12-96 port counts• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1™ CAT 6 SLIMLINE PATCH CORDS• Verified by ETL for TIA Category 6 component requirements • 24-gauge stranded for maximum flexibility • Nominal outer diameter of .224" to reduce cable pathways
in racks and cabinets • SlimLine boot supports high-density patching and extraction
with extended-reach latch release • Made-to-order custom lengths are quickly available for
top-of-rack, end-of-row, or general network patching • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM - 1000 ENHANCED+ CAT 6 CABLE• Optimal support for Gigabit Ethernet with headroom• Provides additional bandwidth for future applications• ETL verified to exceed ANSI/TIA-568-C.2 Category 6 standard• Independently verified headroom guarantees ensure
consistent performance• 1,500 ft. smartPAK packaging option reduces waste
and increases installation efficiency• Power sum characterization gives highest performance
using existing applications • Characterized to 550 MHz, 300 MHz greater than the standard • Outer diameter 0.230" (5.8mm), CMP• UL/ETL Listed• 23 gauge• Proudly manufactured in the U.S.
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON CONNECTORS
eXtreme Cat 6 Component-Rated QuickPort Connector 61110-R*6
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 6 Flat 110-Style Patch Panel 69586-U24 69586-U48
Cat 6 Angled 110-Style Patch Panel 69587-U24 69587-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
Cat 6 110-Style Wiring Block, wall mount w/legs and C-4 clipsˆ 41AB6-1F4
LEVITON PATCH CORDS
Atlas-X1 Cat 6 SlimLine UTP Patch Cord, U.S. made 6D560-xx°
BERK-TEK CABLE PLENUM 1500' SMARTPAK
PLENUM 1000’ TEKPAK
RISER 1500’ SMARTPAK
RISER 1000’ TEKPAK
LANmark-1000 Enhanced+ Cat 6 Cable, Blue 11074694 10032094 11074701 10032455
LANmark-1000 Enhanced+ Cat 6 Cable, White 11074738 10032092 11074740 10032459
LANmark-1000 Enhanced+ Cat 6 Cable, Grey 11074739 10032026 11074741 10032452
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 61110 connectors ˆ = For consolidation point. Legs are non-removable and not sold separately xx = Length 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S)
Rele
ased
Jun
e 20
17
F17
678
4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6300 | CAT 6 PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
RECOMMENDED FOR1000BASE-T network applications and mission-critical systems
Network applications in data center, financial, health care, government, transportation, and education environments
PoE standards: IEEE 802.3af, 802.3at, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Networks with high bandwidth utilization requirements
Extending network reach beyond 100 meters
Any IP-based system utilizing UTP cabling
AV systems for high-end conference rooms and classrooms
Federal, state, and municipal projects funded by ARRA^
^See Leviton website for product specific ARRA eligibility details
SYSTEM DATA SHEET
CX6300 | CAT 6 PREMIUM+ UTP SYSTEMOur best Cat 6 system features the Atlas-X1™ connector and offers superior performance for mission-critical applications
• Exceeds ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements for channel, link, and component performance to support IEEE 1000BASE-T networks
• Ideal for military applications and projects funded by the American Recovery and Reinvestment Act (ARRA)^
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Error-free performance up to 1 Gigabit Ethernet with full duplex transmission
• Provides additional performance margin to reliably support Gigabit Ethernet in high-noise environments
• Third-party verified by Intertek Testing Services (ETL)
• Provides bandwidth required for multimedia, broadband, and video applications
• Guaranteed cable balance improves overall performance and reduces emissions which results in reduced transmission errors
• Enables Ethernet channel lengths beyond 100 meters
GUARANTEED* SYSTEM PERFORMANCE
CX6300 | CAT 6 PREMIUM+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
5% 8 dB 8 dB 9 dB 10 dB 5 dB 9 dB 10 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6 and ISO/IEC 11801 Class E requirements across the entire frequency range. All values represent worst-case margins for 9- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6300 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A EB E A
2m
A FC D CD
NEAR END FAR END
A B C D E F
Patch Cord 6D560-xx°
Patch Panel69586-U48
Patch Panel49255-H48
Connector 61UJK-R*6
CableLANmark™-2000
Consolidation Point 41AB6-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6300 | CAT 6 PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 6 COMPONENT-RATED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between plug and connector, preventing arcing from intermittent disconnects in PoE applications
• PoE optimized tine geometry prevents arcing damage where plug and connector make contact, extending the life of the connector and ensuring maximum performance (see specification sheets for full PoE capabilities)
• Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications
• Available with internal shutter to protect from dust and debris• Unique tool-free design requires no specialized termination
or re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Includes interchangeable color-coded icons for identification
(VOICE, DATA, AV, blank), also offered separately in 13 colors• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 6 110-STYLE AND QUICKPORT PATCH PANELS• Exceed requirements for Category 6 described in ANSI/TIA-568-C.2
and Class E requirements described in ISO/IEC 11801• Independently tested and verified by Intertek (ETL) to meet all
TIA component, permanent link, and channel requirements• 110-Style available in flat and angled• QuickPort available in flat, angled, recessed, and Zero-U configurations• Gas-tight insulation displacement contacts provide excellent
conductor retention and resistance to surface-contact oxidation for life of the system
• Include color codes for T568A/B wiring schemes
LEVITON PATCH CORDS ATLAS-X1 CAT 6 SLIMLINE PATCH CORDS• Verified by ETL for TIA Category 6 component requirements • 24-gauge stranded for maximum flexibility • Nominal outer diameter of .25" to reduce cable pathways in
racks and cabinets • SlimLine boot supports high-density patching and extraction
with extended-reach latch release • Made-to-order custom lengths are quickly available for
top-of-rack, end-of-row, or general network patching • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARK™ - 2000 PREMIUM CAT 6 CABLE• Performance margin allows reliable support for Gigabit
Ethernet, even in high-noise environments• Full duplex operation capable over four cable pairs
enables multimedia, broadband video, analog video, and other future applications
• ETL LANmark Verified beyond ANSI/TIA-568-C.2 Category 6 performance
• Independently verified headroom of 10dB beyond standard on NEXT, PSNEXT, ACR, and PSACT ensures exceptional performance
• Improved ACR means stronger signal reaches the receiver for cleaner video and data transmission
• Outer diameter 0.220" (5.69mm), CMP• Characterized to 600 MHz, 350 MHz greater than the standard• UL/ETL Listed • 23-gauge• Proudly manufactured in the U.S.
Rele
ased
May
201
8
E18
657
8A
B
IE
LEVITON CONNECTORS STANDARD SHUTTERED ADDITIONAL ICONS
Atlas-X1 Cat 6 Component-Rated QuickPort Connector 61UJK-R*6 61UJK-S*6 ICONS-IC*
LEVITON PATCH PANELS 1RU 24-PORT 1RU 48-PORT 2RU 48-PORT 2RU 72-PORT
Cat 6 Flat 110-Style Patch Panel 69586-U24 69586-U48
Cat 6 Angled 110-Style Patch Panel 69587-U24 69587-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel + 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 96-PAIR
Cat 6 110-Style Wiring Block, Wall Mount with Legs and C-4 Clipsˆ 41AB6-1F4
LEVITON PATCH CORDS
Atlas-X1 Cat 6 SlimLine UTP Patch Cord 6D560-xxo
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 61UJK connectors ˆ = For consolidation point. Legs are non-removable and not sold separately xx = Length in feet o = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S), Orange (O), Violet (V)
BERK-TEK CABLE PLENUM REEL PLENUM REEL-IN-A-BOX RISER REEL RISER REEL-IN-A-BOX
LANmark-2000 Premium Cat 6 Cable, Blue 10163222 10163780 10167476 10167477
LANmark-2000 Premium Cat 6 Cable, White 10167311 10167312 10167480 10167481
LANmark-2000 Premium Cat 6 Cable, Grey 10167464 10167307 10167478 10167479
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM
RECOMMENDED FOR10GBASE-T network applications and mission-critical systems
Short links in data centers
High-density cabling and constrained pathway environments
Optimal total cost of ownership for financial, health care, government, transportation, and education environments
Supports IEEE 802.3af, 802.at, Cisco UPoE, and Power over HDBaseT (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Wireless access points for IEEE 802.11ac applications
IP-based security and building automation systems utilizing UTP cabling
Optimal support for Energy Efficient Ethernet in the data center
CAT
PREMIUM+
SYSTEM DATA SHEET
Highest performing, robust Cat 6A system ideal for demanding mission-critical networks
• Innovative crosstalk prevention (XTP) technology in the LANmark-XTP cable assures excellent alien crosstalk (AXT) suppression, with industry-leading channel margin guarantees
• Exceeds ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements for channel, link, and component requirements to support IEEE 10GBASE-T (802.3an) networks
• Limited lifetime warranty available when installed by Leviton or Berk-Tek certified contractors
• Channel performance third-party verified by Intertek Testing Services (ETL)
• Error-free performance up to 10 Gigabit Ethernet with full duplex transmission up to 500MHz
• Backwards compatible with Gigabit Ethernet to provide seamless migration to 10GBASE-T and supports all Cat 6 and Cat 5e system requirements
GUARANTEED* SYSTEM PERFORMANCE
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
PSA
NEX
T
PSA
AC
R-F
3% 5 dB 6 dB 10 dB 10 dB 4 dB 7 dB 7 dB 5 dB 11 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements across the entire frequency range. All values represent worst-case margins for 5- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6850 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A EB E A
2m
A FC D CD
NEAR END FAR END
A B C D E F
Patch Cord 6AS10-xx°
Patch Panel6A586-U48
Patch Panel49255-D72
Connector 6AUJK-R*6
CableLANmark™-XTP
Consolidation Point 41D6A-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 6A COMPONENT-RATED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology protects tines from
damage and increases system longevity• Connectors available with internal shutter to protect
against dust and debris• Unique, tool-free design requires no specialized termination or
re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Connector supplied with interchangeable icons (VOICE, DATA,
AV, and blank) color coded to match the connector face• Interchangeable icons (available in 13 colors) make it easy
to identify and track data, voice, or other functions• Supports Power over Ethernet (PoE) — see individual product
specifications sheets for full capabilities• Proudly manufactured in the U.S.
LEVITON PATCH CORDS ATLAS-X1 CAT 6A SLIMLINE PATCH CORDS• ETL verified for TIA Cat 6A component and channel requirements • Excellent alien crosstalk (AXT) suppression • 26-gauge stranded for maximum flexibility in any density
patching environment • Nominal outer diameter of .24" to reduce cable pathways in
racks and cabinets • SlimLine-design modular boot supports high-density patching • Available from stock in lengths of 3', 5', 7', 10', 15', 20' and
in 7 colors • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM-XTP CAT 6A UTP CABLE • Innovative noise-canceling XTP technology delivers superior
alien crosstalk (AXT) suppression• Manages the convergence of voice, video, and data at
10 gigabit Ethernet speeds, simplifying networks• Verified performance beyond ANSI/TIA-568-C.2 Category 6A
by third-party labs (Intertek ETL)• Easier installation and cable management with reduced
outer diameter of 0.275" (6.9mm), CMP• Offers superior electrical performance, as well as AXT
and EMI resistance without requiring grounding or bonding• Supports both short and long channels• Better density and cooling• Proudly manufactured in the U.S.
Rele
ased
Oct
ober
201
6 J1
6 6
40
6A
B
I
LEVITON PATCH PANELS CAT 6A E2XHD, 110-STYLE, AND QUICKPORT PATCH PANELS• Available in cassette-style, 110-Style, and QuickPort flat, angled,
recessed angled, recessed, and zero-u configurations in 12-, 24-, 48-, and 72-port counts
• Patented triple-stage compensation design with integrated flexible circuit enhances link and channel performance
• Gas-tight insulation displacement contacts provide excellent conductor retention and resistance to surface-contact oxidation for life of the system
• QuickPort patch panels available for high-density applications — 1RU, 48-port
BERK-TEK CABLE PLENUM REEL RISER REELLANmark-XTP Cat 6A UTP Cable, Blue 11082057 11082062LANmark-XTP Cat 6A UTP Cable, White 11082058 11082063LANmark-XTP Cat 6A UTP Cable, Grey 11082059 11082064* = Connector Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 6AUJK connectors ˆ = Sold empty, load with E2XHD-BRK cassettes ˆ = For consolidation point, legs are non-removable and not sold separatelyxx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S), Orange (O), Violet (V)
LEVITON CONNECTORS STANDARD WITH SHUTTER ADDITIONAL ICONSAtlas-X1 Cat 6A Component-Rated QuickPort Connector 6AUJK-R*6 6AUJK-S*6 ICONS-IC*LEVITON E2XHD CASSETTESe2XHD Empty Cassette+ E2XHD-BRKLEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT 2RU, 72-PORT 4RU, 192-PORTCAT 6A Flat 110-Style Patch Panel 6A586-U24 6A586-U48CAT 6A Angled 110-Style Patch Panel 6A587-U24 6A587-U48e2XHD High-Density Flat Patch Panelˆ E2X1F-D48 E2X4F-192e2XHD High-Density Angled Patch Panelˆ E2X1A-D48 E2X4A-192Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 64-PAIRCAT 6A 110-Style Wiring Block, wall mount with legs and C-4 clipsˆ 41D6A-1F4LEVITON PATCH CORDSAtlas-X1 Cat 6A SlimLine Patch Cord 6AS10-xx°
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CS6700 | CAT 6A SHIELDED SYSTEM BerkTekLevitonTechnologies.com
• Exceeds ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements for channel, link, and component requirements to support IEEE 10GBASE-T (802.3an) networks
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Third-party verified by Intertek Testing Services (ETL)
• Ensures excellent alien crosstalk (AXT) and EMI/RFI immunity, with margin guarantees
• Error-free performance up to 10 Gigabit Ethernet with full duplex transmission
• Backwards compatible with Gigabit Ethernet to provide seamless migration path to 10GBASE-T and supports all Cat 6 and Cat 5e system requirements
• Atlas-X1™ connector is independently tested to exceed performance standards and features an innovative design that allows for tool-free terminations
RECOMMENDED FOR10GBASE-T network applications and mission-critical systems
Data center channel configurations from 9 to 100 meters
Data center applications including computer clusters and end-of-row architectures
Optimal total cost of ownership for financial, health care, government, transportation, and education environments
Network applications where EMI/RFI may be present and data security is critical
Networks with high bandwidth utilization requirements
Government NIPRNET and SIRPNET protocols
PoE standards: IEEE 802.3af, 802.3at, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
AV systems for high-end conference rooms and classrooms
IEEE 802.11ac applications
SYSTEM DATA SHEET
CS6700 | CAT 6A SHIELDED SYSTEM Ideal for applications that require the most advanced Cat 6A performance with added signal isolation
GUARANTEED* SYSTEM PERFORMANCECS6700 | CAT 6A SHIELDED SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
PSA
NEX
T
PSA
AC
R-F
3% 4 dB 6 dB 8 dB 8 dB 3 dB 7 dB 8 dB 16 dB 16 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements across the entire frequency range. All values represent worst-case margins for 5- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CS6700 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM ELEMENTS
3m 75m
A D
2m
A C BCB
5m
A
15m
DCB B
NEAR END FAR END
A B C D
Patch Cord 6AS10-xx°
Connector6ASJK-R*6
Patch Panel4S255-S24
Cable LANmark™-10G FTP
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CS6700 | CAT 6A SHIELDED SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 6A SHIELDED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology (RFT) protects against
tine damage and maintains contact force between plug and connector, preventing arcing from intermittent disconnects in PoE applications
• PoE optimized tine geometry prevents arcing damage where plug and connector make contact, extending the life of the connector and ensuring maximum performance (see specification sheets for full PoE capabilities)
• Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications
• Available with internal shutter to protect from dust and debris• Unique tool-free design requires no specialized termination
or re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Includes interchangeable color-coded icons for identification
(VOICE, DATA, AV, blank), also offered separately in 13 colors• Proudly manufactured in the U.S.
LEVITON PATCH CORDS ATLAS-X1 CAT 6A SLIMLINE SHIELDED PATCH CORDS• Cable construction provides data security and
EMI/RFI protection • ETL Verified for TIA Cat 6A component and channel requirements • Nominal outer diameter of .24" to reduce cable pathway
congestion in racks and cabinets • 26-gauge stranded for maximum flexibility in any density
patching environment • SlimLine boot supports high-density patching and easy
extraction with extended-reach latch release • Snagless boot design prevents tab breakage during
moves, adds, and changes• Excellent alien crosstalk (AXT) suppression • Country of Origin is U.S., manufactured using Berk-Tek cable• Make-to-order custom lengths with quick turnaround times
BERK-TEK CABLELANMARK™ - 10G FTP CABLE• Single overall foil shield for smaller outside diameter
of 0.280" (7.1mm)• Reduced cable termination time and material costs when
compared to pair-shielded cable designs • Increased signal isolation prevents contaminant noise from
entering cabling system • Lower bit errors resulting in increased network performance • ETL verified to ANSI/TIA-568-C.2 Category 6A• Can be used with RJ-45 style F/UTP connectivity• UL/ETL Listed • 23 gauge• Proudly manufactured in the U.S.
Rele
ased
Dec
embe
r 201
8
L18
750
2A
B
IE
LEVITON PATCH PANELS ATLAS-X1 CAT 6A SHIELDED QUICKPORT PATCH PANELS• Meet ANSI/TIA-568-C.2 and ISO/IEC 11801• Stainless-steel “comb” maintains consistent ground path
between connector and panel• Available in QuickPort 1RU 24-port and 2RU 48-port angled
configurations • Accepts all shielded QuickPort connectors• Shielding protects against Electromagnetic Interference (EMI)
and Radio Frequency Interference (RFI), and provides excellent alien crosstalk (AXT) suppression
LEVITON CONNECTORS STANDARD SHUTTERED ADDITIONAL ICONS
Atlas-X1 Cat 6A Shielded QuickPort Connector 6ASJK-R*6 6ASJK-S*6 ICONS-IC*
LEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT
Atlas-X1 Flat Shielded QuickPort Patch Panel+ 4S255-S24 4S255-D48 4S255-S48
Atlas-X1 Angled Shielded QuickPort Patch Panel+ 4S256-S24 4S256-D48 4S256-S48
LEVITON PATCH CORDS
Atlas-X1 Cat 6A SlimLine Patch Cord 6AS10-xxo
BERK-TEK CABLE PLENUM REEL RISER REEL
LANmark-10G FTP, Red 10188969 10189804
LANmark-10G FTP, Black 10189549 11077196
LANmark-10G FTP, Grey 10167487 10189798
* = Connector Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 6ASJK connectors xx = Length: 3, 5, 7, 10, 15, 20 feet o = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S), Orange (O), Violet (V)
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6500 | CAT 6A STANDARD UTP SYSTEM BerkTekLevitonTechnologies.com
SYSTEM DATA SHEET
CX6500 | CAT 6A STANDARD UTP SYSTEMOur standard Cat 6A system, excellent for high-bandwidth networks
• Exceeds ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements for cabling systems performance to support IEEE 10GBASE-T (802.3an) networks
• Limited lifetime warranty available when projects are installed by Leviton or Berk-Tek certified contractors
• Third-party verified by Intertek Testing Services (ETL)
• Error-free performance up to 10 Gigabit Ethernet with full duplex transmission
• Backwards compatible with Gigabit Ethernet to provide seamless migration path to 10GBASE-T and supports all Cat 6 and Cat 5e system requirements
GUARANTEED* SYSTEM PERFORMANCE
CX6500 | CAT 6A STANDARD UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
PSA
NEX
T
PSA
AC
R-F
3% 2 dB 3 dB 5 dB 6 dB 1 dB 4 dB 5 dB 0 dB 0 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements across the entire frequency range. All values represent worst-case margins for 7- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6500 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
RECOMMENDED FOR10GBASE-T network application
Enterprise applications
Optimized total cost of ownership for financial, health care, government, transportation, and education environments
Supports IEEE 802.3af, 802.3at, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
IP-based security and building automation systems utilizing UTP cabling
3m 75m 15m 5m
A CB C E A
2m
A DB
NEAR END FAR END
A B C D E
Patch Cord 6AS10-xx°
Patch Panel6A586-U48
CableLANmark™-10G2
Consolidation Point 41D6A-1F4
Connector 6110G-R*6
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6500 | CAT 6A STANDARD UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSEXTREME® CAT 6A CHANNEL-RATED QUICKPORT® CONNECTORS• ETL verified for TIA Cat 6A channel performance • Patented dual-layer T568A/B labels simplify punchdown
and reduce rework• Patented Cone of Silence® helps suppress alien crosstalk (AXT)• Patented Retention Force Technology (RFT) protects against
damage from 4- or 6-pin plugs• Pair Separation Towers ease conductor separation• Backward compatible with Cat 6 and 5e systems, and
1000BASE-T applications• Proudly manufactured in the U.S.
LEVITON PATCH PANELS CAT 6A E2XHD, 110-STYLE, AND QUICKPORT PATCH PANELS• Available in cassette-style, 110-Style, and QuickPort flat, angled,
recessed angled, recessed, and zero-u configurations in 12-, 24-, 48-, and 72-port counts
• Patented triple-stage compensation design with integrated flexible circuit enhances link and channel performance
• Gas-tight insulation displacement contacts provide excellent conductor retention and resistance to surface-contact oxidation for life of the system
• QuickPort patch panels available for high-density applications — 1RU, 48-port
LEVITON PATCH CORDS ATLAS-X1™ CAT 6A SLIMLINE PATCH CORDS• ETL verified for TIA Cat 6A component and channel requirements • Excellent alien crosstalk (AXT) suppression • 26-gauge stranded for maximum flexibility in any density
patching environment • Nominal outer diameter of .24" to reduce cable pathways
in racks and cabinets • SlimLine-design modular boot supports high-density patching • Available in lengths of 3', 5', 7', 10', 15', 20' and in 7 colors • Made-to-order custom lengths are quickly available for
top-of-rack, end-of-row, or general network patching• Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM 10G2 CAT 6A UTP CABLE • Manages the convergence of voice, video, and data at 10
gigabit Ethernet speeds, simplifying networks• Improved insertion loss for stronger signal-to-noise ratio• ETL LANmark Verified beyond ANSI/TIA-568-C.2
Category 6A performance• Fully compliant to Category 6A requirements, including
alien crosstalk (AXT)• Easier installation and cable management with round design
and outer diameter of 0.300" (7.6mm), CMP• Characterized to 750 MHz, 250 MHz greater than the standard• UL/ETL Listed • 23 gauge• Proudly manufactured in the U.S.
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
LEVITON CONNECTORS
eXtreme Cat 6A Channel-Rated QuickPort Connector 6110G-R*6
LEVITON E2XHD CASSETTES
e2XHD Empty Cassette+ E2XHD-BRK
LEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT 2RU, 72-PORT 4RU, 192-PORT
e2XHD High-Density Flat Patch Panelˆ E2X1F-D48 E2X4F-192
e2XHD High-Density Angled Patch Panelˆ E2X1A-D48 E2X4A-192
Cat 6A Flat 110-Style Patch Panel 6A586-U24 6A586-U48
Cat 6A Angled 110-Style Patch Panel 6A587-U24 6A587-U48
Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72
Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72
LEVITON PATCH CORDS
Atlas-X1 Cat 6A SlimLine Patch Cord 6AS10-xx°
BERK-TEK CABLE PLENUM REEL RISER REEL
LANmark-10G2 Cat 6A UTP Cable Blue 10130484 10137700
LANmark-10G2 Cat 6A UTP Cable, White 10137384 10137703
LANmark-10G2 Cat 6A UTP Cable, Grey 10137183 10137701
* = Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 6110G connectors ˆ = Sold empty, load with E2XHD-BRK cassettes xx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S)
Rele
ased
Oct
ober
201
6 J1
6 6
405
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM
RECOMMENDED FOR10GBASE-T network applications and mission-critical systems
Short links in data centers
High-density cabling and constrained pathway environments
Optimal total cost of ownership for financial, health care, government, transportation, and education environments
Supports IEEE 802.3af, 802.at, Cisco UPoE, and Power over HDBaseT (PoH) up to 100 watts
Supports emerging PoE standards such as the draft IEEE 802.3bt, including 100 watts
Wireless access points for IEEE 802.11ac applications
IP-based security and building automation systems utilizing UTP cabling
Optimal support for Energy Efficient Ethernet in the data center
CAT
PREMIUM+
SYSTEM DATA SHEET
Highest performing, robust Cat 6A system ideal for demanding mission-critical networks
• Innovative crosstalk prevention (XTP) technology in the LANmark-XTP cable assures excellent alien crosstalk (AXT) suppression, with industry-leading channel margin guarantees
• Exceeds ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements for channel, link, and component requirements to support IEEE 10GBASE-T (802.3an) networks
• Limited lifetime warranty available when installed by Leviton or Berk-Tek certified contractors
• Channel performance third-party verified by Intertek Testing Services (ETL)
• Error-free performance up to 10 Gigabit Ethernet with full duplex transmission up to 500MHz
• Backwards compatible with Gigabit Ethernet to provide seamless migration to 10GBASE-T and supports all Cat 6 and Cat 5e system requirements
GUARANTEED* SYSTEM PERFORMANCE
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM CHANNEL MARGIN GUARANTEES*
Inse
rtio
n Lo
ss
NEX
T
PSN
EXT
AC
R-F
(ELF
EXT)
PSA
CR-
F (P
SELF
EXT)
Retu
rn L
oss
AC
R-N
PSA
CR-
N
PSA
NEX
T
PSA
AC
R-F
3% 5 dB 6 dB 10 dB 10 dB 4 dB 7 dB 7 dB 5 dB 11 dB
*Values represent guaranteed margins to ANSI/TIA-568-C.2 standard at 20ºC ambient temperature. All parameters comply with ANSI/TIA-568-C.2 Cat 6A and ISO/IEC 11801 Class EA requirements across the entire frequency range. All values represent worst-case margins for 5- to 100-meter channel configurations. System performance margin guarantees are representative of the specific components and topologies as listed on the CX6850 solution data sheet and third-party test report. Contact your Berk-Tek Leviton Technologies technical representative for more information on alternative components and channel configurations. Details at berkteklevitontechnologies.com.
Guaranteed System Performance applies exclusively when the system is installed and tested by Leviton Network Solutions Certified Contractors, or Berk-Tek Certified OASIS Integrators. Guaranteed margin values apply at the time of installation.
SYSTEM TOPOLOGY
3m 75m 15m 5m
A EB E A
2m
A FC D CD
NEAR END FAR END
A B C D E F
Patch Cord 6AS10-xx°
Patch Panel6A586-U48
Patch Panel49255-D72
Connector 6AUJK-R*6
CableLANmark™-XTP
Consolidation Point 41D6A-1F4
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com
LEVITON CONNECTORSATLAS-X1™ CAT 6A COMPONENT-RATED QUICKPORT® CONNECTORS• Tested and approved for use in air-handling spaces
(plenum rating) in accordance with UL Standard 2043• Independently tested and guaranteed to exceed all
component, permanent link, and channel margins• Patented Retention Force Technology protects tines from
damage and increases system longevity• Connectors available with internal shutter to protect
against dust and debris• Unique, tool-free design requires no specialized termination or
re-termination tool• Short connector design supports a wider range of applications
(e.g. shallow boxes, enclosures, bend radius, etc.)• Connector supplied with interchangeable icons (VOICE, DATA,
AV, and blank) color coded to match the connector face• Interchangeable icons (available in 13 colors) make it easy
to identify and track data, voice, or other functions• Supports Power over Ethernet (PoE) — see individual product
specifications sheets for full capabilities• Proudly manufactured in the U.S.
LEVITON PATCH CORDS ATLAS-X1 CAT 6A SLIMLINE PATCH CORDS• ETL verified for TIA Cat 6A component and channel requirements • Excellent alien crosstalk (AXT) suppression • 26-gauge stranded for maximum flexibility in any density
patching environment • Nominal outer diameter of .24" to reduce cable pathways in
racks and cabinets • SlimLine-design modular boot supports high-density patching • Available from stock in lengths of 3', 5', 7', 10', 15', 20' and
in 7 colors • Country of Origin is U.S., manufactured using Berk-Tek cable
BERK-TEK CABLELANMARKTM-XTP CAT 6A UTP CABLE • Innovative noise-canceling XTP technology delivers superior
alien crosstalk (AXT) suppression• Manages the convergence of voice, video, and data at
10 gigabit Ethernet speeds, simplifying networks• Verified performance beyond ANSI/TIA-568-C.2 Category 6A
by third-party labs (Intertek ETL)• Easier installation and cable management with reduced
outer diameter of 0.275" (6.9mm), CMP• Offers superior electrical performance, as well as AXT
and EMI resistance without requiring grounding or bonding• Supports both short and long channels• Better density and cooling• Proudly manufactured in the U.S.
Rele
ased
Oct
ober
201
6 J1
6 6
40
6A
B
I
LEVITON PATCH PANELS CAT 6A E2XHD, 110-STYLE, AND QUICKPORT PATCH PANELS• Available in cassette-style, 110-Style, and QuickPort flat, angled,
recessed angled, recessed, and zero-u configurations in 12-, 24-, 48-, and 72-port counts
• Patented triple-stage compensation design with integrated flexible circuit enhances link and channel performance
• Gas-tight insulation displacement contacts provide excellent conductor retention and resistance to surface-contact oxidation for life of the system
• QuickPort patch panels available for high-density applications — 1RU, 48-port
BERK-TEK CABLE PLENUM REEL RISER REELLANmark-XTP Cat 6A UTP Cable, Blue 11082057 11082062LANmark-XTP Cat 6A UTP Cable, White 11082058 11082063LANmark-XTP Cat 6A UTP Cable, Grey 11082059 11082064* = Connector Color: White (W), Lt. Almond (T), Ivory (I), Yellow (Y), Orange (O), Crimson (C), Dark Red (R), Purple (P), Blue (L), Green (V), Grey (G), Black (E), Brown (B) + = Sold empty, load with 6AUJK connectors ˆ = Sold empty, load with E2XHD-BRK cassettes ˆ = For consolidation point, legs are non-removable and not sold separatelyxx = Length: 3, 5, 7, 10, 15, 20 feet ° = Color: White (W), Yellow (Y), Blue (L), Black (E), Red (R), Green (G), Grey (S), Orange (O), Violet (V)
LEVITON CONNECTORS STANDARD WITH SHUTTER ADDITIONAL ICONSAtlas-X1 Cat 6A Component-Rated QuickPort Connector 6AUJK-R*6 6AUJK-S*6 ICONS-IC*LEVITON E2XHD CASSETTESe2XHD Empty Cassette+ E2XHD-BRKLEVITON PATCH PANELS 1RU, 24-PORT 1RU, 48-PORT 2RU, 48-PORT 2RU, 72-PORT 4RU, 192-PORTCAT 6A Flat 110-Style Patch Panel 6A586-U24 6A586-U48CAT 6A Angled 110-Style Patch Panel 6A587-U24 6A587-U48e2XHD High-Density Flat Patch Panelˆ E2X1F-D48 E2X4F-192e2XHD High-Density Angled Patch Panelˆ E2X1A-D48 E2X4A-192Flat QuickPort Patch Panel+ 49255-H24 49255-Q48 49255-H48 49255-D72Angled QuickPort Patch Panel+ 49256-H24 49256-D48 49256-H48 49256-D72LEVITON 110-STYLE WALL-MOUNT WIRING BLOCK KIT 64-PAIRCAT 6A 110-Style Wiring Block, wall mount with legs and C-4 clipsˆ 41D6A-1F4LEVITON PATCH CORDSAtlas-X1 Cat 6A SlimLine Patch Cord 6AS10-xx°
PART NUMBERS - Common part numbers shown. Many additional colors, lengths, and other options available online.
Customer-focused, technology-driven, quality-assured for unparalleled return on infrastructure investment
CX6850 | CAT 6A PREMIUM+ UTP SYSTEM BerkTekLevitonTechnologies.com