bermad for the petroleum industry separation valves
TRANSCRIPT
BERMAD Separation Valves enable the removal of water(or other liquid) that has infiltrated petroleum products and has beenallowed to separate.The heavier liquid is discharged through the Separation Valve.Theseparation sensitivity is 0.04.
specific gravity differential
The primary application is for draining water.
Aid and prevent environmental pollution problems
Eliminates “ I forgot to close thevalve” human error
Reduces labor cost
Drastically reduces the need forwaste water treatment
Requires minimal service andmaintenance
No external power required for operation
Gasoline/Gas oil/Jet fuel/Kerosene/Diesel oil/
Wateraterater
aterater
Water
WW
WW
Crude oil/
Typical Uses
Features
Type TOO Type TORFor bottom draining For floating roof draining
Separation ValvesBERMAD for the Petroleum Industry
Internationally Patented
The safest way to drain water from storage tanks
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of
BERMAD Control Valves
Sub Surface Reservoir/Sumps
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of
BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of
BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of
BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of
BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Cat. #PCTFE01 ver 09/[email protected]
©Copyright by BERMAD Control Valves
BERMAD for the Petroleum IndustrySeparation Valves
English
The information contained in this document is subject tochange without notice. BERMAD shall not be liable for anyerrors contained herein. All rights reserved.
Oil storage tank
Separation valve
Typical Installation
Product
Water
Vent and sampling valve
Existing manual gate valve
Equalizing valve
Drain Valve
The type TOO Separation Valveis suite for clean and safe automatic draining of the accumulated water from the bottom of the oil/fuel tanks.
Type TOO valves are installed in NORMALLY CLOSED configuration. The draining rate is controlled and monitored to prevent turbulence and emulsion.
The valve automatically closes after draining the heavier liquid, ending the cycle.
Type TOO has only one moving part, making it an elegantly simple device requiring almost no maintenance.
475
457 76
0
For bottom draining applicationsType TOO
SpecificationsMaterials*:
Valve body and cover: SteelInternal Parts: Stainless steelSeals: VitonFinish: F
* Other materials available upon requestInlet flange size: 4” ASNI 150 RFHEAD (max : 25 mFlow rate: 12 m³/h (lower flow rate available)W
usion Bonded Epoxy Coated
#)
eight: 64 kg (standard) Sizes in millimeters
BERMAD for the Petroleum IndustrySeparation Valves
Oil storage tank Tank floating roof
Separation valve
Existing manual gate valve
RainwaterProductJoint or flexible pipe
The type TOR Separation Valveis suited for clean and safe automatic draining of the rainwater from the upper surfaces of oil/fuel storage tanks floating roofs.
Type TOR valves are installed in NORMALLY OPEN configuration, ensuring continuous rainwater draining.
In case of damage to the drainingpipes, which might cause oil/fuel leakage, the valve closes automatically.
Type TOR has only two moving parts, making it an elegantly simple devicerequiring almost no maintenance.
Typical Installation
Sizes in millimeters
475
457
1175
Type TORFor floating roof draining applications
SpecificationsMaterials*:
Valve body and cover: SteelInternal Parts: Stainless steelSeals: VitonFinish:* Other materials available upon request
Inlet flange size: 4” ASNI 150 RFHEAD (max : 25 mFlow rate: 55 m³/h (lower flow rate available)W
Fusion Bonded Epoxy Coated
#)
eight: 87 kg (standard)
BERMAD for the Petroleum IndustrySeparation Valves
Oil storage tank
Separation valve
Typical Installation
Product
Water
Vent and sampling valve
Existing manual gate valve
Equalizing valve
Drain Valve
The type TOO Separation Valveis suite for clean and safe automatic draining of the accumulated water from the bottom of the oil/fuel tanks.
Type TOO valves are installed in NORMALLY CLOSED configuration. The draining rate is controlled and monitored to prevent turbulence and emulsion.
The valve automatically closes after draining the heavier liquid, ending the cycle.
Type TOO has only one moving part, making it an elegantly simple device requiring almost no maintenance.
475
457 76
0
For bottom draining applicationsType TOO
SpecificationsMaterials*:
Valve body and cover: SteelInternal Parts: Stainless steelSeals: VitonFinish: F
* Other materials available upon requestInlet flange size: 4” ASNI 150 RFHEAD (max : 25 mFlow rate: 12 m³/h (lower flow rate available)W
usion Bonded Epoxy Coated
#)
eight: 64 kg (standard) Sizes in millimeters
BERMAD for the Petroleum IndustrySeparation Valves
Oil storage tank Tank floating roof
Separation valve
Existing manual gate valve
RainwaterProductJoint or flexible pipe
The type TOR Separation Valveis suited for clean and safe automatic draining of the rainwater from the upper surfaces of oil/fuel storage tanks floating roofs.
Type TOR valves are installed in NORMALLY OPEN configuration, ensuring continuous rainwater draining.
In case of damage to the drainingpipes, which might cause oil/fuel leakage, the valve closes automatically.
Type TOR has only two moving parts, making it an elegantly simple devicerequiring almost no maintenance.
Typical Installation
Sizes in millimeters
47545
7
1175
Type TORFor floating roof draining applications
SpecificationsMaterials*:
Valve body and cover: SteelInternal Parts: Stainless steelSeals: VitonFinish:* Other materials available upon request
Inlet flange size: 4” ASNI 150 RFHEAD (max : 25 mFlow rate: 55 m³/h (lower flow rate available)W
Fusion Bonded Epoxy Coated
#)
eight: 87 kg (standard)
BERMAD for the Petroleum IndustrySeparation Valves
BERMAD Separation Valves enable the removal of water(or other liquid) that has infiltrated petroleum products and has beenallowed to separate.The heavier liquid is discharged through the Separation Valve.Theseparation sensitivity is 0.04.
specific gravity differential
The primary application is for draining water.
Aid and prevent environmental pollution problems
Eliminates “ I forgot to close thevalve” human error
Reduces labor cost
Drastically reduces the need forwaste water treatment
Requires minimal service andmaintenance
No external power required for operation
Gasoline/Gas oil/Jet fuel/Kerosene/Diesel oil/
Wateraterater
aterater
Water
WW
WW
Crude oil/
Typical Uses
Features
Type TOO Type TORFor bottom draining For floating roof draining
Separation ValvesBERMAD for the Petroleum Industry
Internationally Patented
The safest way to drain water from storage tanks
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of BERMAD Control Valves
Sub Surface Reservoir/Sumps
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Typical Applications
Additional Applications
Water draining from storage tanks of oils/fuels, in the oil industry.
Safe draining of rain water from storage tanks with floating roofs.
Serves as a safety device in discharge systems.
General draining processes in the chemical and in the pharmaceutical industries.
Oil separation in industries using oil and water.
The Separation Valves can beused for materials other thanoil & water as long as they are intwo distinct phases.
Combined Installation: Rainwater and Bottom Draining
Type TOR: As a safety device for rainwater draining from floating roof.
Type TOO: Draining of accumulated water from storage tanks.
Type TOR Type TOO
Rainwater
Floating roof
Product
Water
Types TOO, TOR & TOP SeparationValves are trademarks® of BERMAD Control Valves
Sub Surface Reservoir/Sumps
Type TOO
Phase 2
Phase 1
Batch Vessel
Type TOP
Phase 2
Phase 1
Submersible pump Note: for pumping systemapplications, please consultBERMAD.
Cat. #PCTFE01 ver 09/[email protected]
©Copyright by BERMAD Control Valves
BERMAD for the Petroleum IndustrySeparation Valves
English
The information contained in this document is subject tochange without notice. BERMAD shall not be liable for anyerrors contained herein. All rights reserved.