bespoke precision crafted boards and fins · freewave for our side fins we were striving for a very...
TRANSCRIPT
BESPOKE PRECISION CRAFTED BOARDS AND FINS
OUR MISSION
“Design and manufacture the best G10 fins on the market”
Every Windsurf board deserves a quality fin but unfortunately many board brands do not give fins the attention
they deserve. A well-designed fin can transform your boards performance and dramatically extend its wind
range.
Atomicsurf fins are designed in Australia using “state of the art” CAD and CDF software’s and are rigorously
tested in the full range of conditions they are expected to operate in. Our partnership with Tribal Fins in the
Netherlands, our fins builders, ensure that they are of the highest accuracy and finish.
Please enjoy the information in the following pages, we are very proud of what we have achieved and know that
fitting one of our fins to your boards will enhance you windsurfing experience. Do not hesitate to contact us if
you have any questions, we love talking about Windsurfing.
ATOMICSURF FIN RANGE
WEAPON Slalom / Race / GPS
The Weapon Slalom fins represents 18 months of meticulous research,
CAD modelling, CFD analysis, prototyping and on water testing. The result
is a pure thoroughbred, a fin that is blisteringly fast in all water states
and amazingly user friendly. No more treading lightly on your slalom fins,
with the Weapon in your board just hook in and feel the speed.
CONSTRUCTION G10, Precision CNC machined and lovingly hand finished.
OUTLINE Elliptical. Reduced tip vortex, low drag and perfectly balanced
lift.
FOIL Modified Eppler e297 Airfoil, 10.8% . Optimised using Xfoil and Java Foil
for high lift and low drag over a range of speeds.
SIZE RANGE 28cm to 42cm, Tuttle and Powerbox.
PRICE $240 to $260 size dependent.
Computer Designed in Australia, crafted in the Netherlands by Tribal fins
Masterblaster Rough water Slalom / GPS
Our mission for the Masterblaster range of fins was to create an amazingly
fast fin that reveled in messy, rough water, without being held back in flat
water conditions. Our R&D on these fins was exhaustingly extensive and we
did not cut any corners in the development. Our team is immensely confident
that this Fin range will hit the sweet spot for many sailors who love speed but
rarely have access to perfectly flat water.
CONSTRUCTION G10, Precision CNC machined and lovingly hand finished.
OUTLINE Wider in the base for power and drive, narrower and thinner in the tip
to reduce nose lift and induce a subtle flex for control in rough water.
FOIL Modified Eppler e297 Airfoil, 11.2% . Optimised using Xfoil and Java Foil
for high lift , low drag and resistance to stall.
SIZE RANGE 28cm to 40cm, Tuttle and Powerbox.
PRICE $240 to $250 size dependent.
Computer Designed in Australia, crafted in the Netherlands by Tribal fins
Fusion (cntr) Freewave
Can you design a fin that works in both Wave Boards and FSW boards in the
full range of water states? We think so and were up for the challenge.
This fin is ideal in modern thruster Freewave boards and works both is small
waves as well as being a Bump and Jump magician.
CONSTRUCTION G10, Precision CNC machined and lovingly hand finished.
OUTLINE The power is centered in the fin for balanced drive. There is subtle
flex in the tip for composure in rough water and grip in the corners.
The outline of the 26cm to 30cm is slightly wider in the tip for more
lift. These Sizes will be used in single fin boards.
FOIL Custom developed Airfoil 9% to 7.5%
Optimised for high lift to drag through a wide range of AOT.
SIZE RANGE 18cm to 30cm in 2cm increments, US, Powerbox and Slotbox.
PRICE $160
Computer Designed in Australia, crafted in the Netherlands by Tribal fins
Fusion (side) Freewave
For our side fins we were striving for a very grippy and forgiving fin that is
not draggy in a straight line. Actually quite a difficult task. Our custom airfoil
section has high grip and speed through a wide range of AOT.
This section is ideal for the demands of maneuver oriented freewave boards.
CONSTRUCTION G10, Precision CNC machined and lovingly hand finished.
OUTLINE A modern interpretation of the classic dolphin fin.
FOIL Custom developed Airfoil 8.5% to 7,5%
Optimised for high lift to drag through a wide range of AOT.
SIZE RANGE 9cm, 10cm, 11cm and 12cm. Slotbox.
PRICE $150 per pair.
Computer Designed in Australia, crafted in the Netherlands by Tribal fins