bessey complete catalogue 2016/2017
TRANSCRIPT
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
1/168
BESSEY Clamping- and Cutting Technology
Complete catalogue 2016/2017 N e w
p r o d u c t
s
2 0 1 6
Clamping elements
for workbenches
Page 113 - 115
Leverage snips –
the latest generation
Page 132 - 133
Door frame
assembly tools
Page 116 - 117
Prices valid fromApril 1st, 2016
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
2/168
x
a
b
Features of BESSEY productsYou can identify the individual performance features
of BESSEY products with the help of assigned symbols.
The complete overview unfolds here!
Allgemein
O rd er - No . We ig ht Pa ck ag in g u ni t
VB0001–VB0003 = Clamping Technology discount groups
VD0001–VD0003 = Cutting Technology discount groups
We request you to place your orders in packaging units.
The BESSEY Product Development Department reserves the rightfor technical alterations. Errors and omissions excepted –to the best of our knowledge the information supplied is accurate.
Note that you are not entitled to any claims from the contact or delict, in particular pro-duct liability claims due to personal injuries or material damage, from our company if youdo not observe our warning and usage notices.
Clamping technology
Wood Steel Plastic Sensitive materials
Opening Throat depth Rail
Diameter Angle Hole dia Clampingforce
Jaw w idth Jaw height Jaw length Strength o f cur-rent max.
Fixing screwhole dia
Cutting Technology
Overall length Continuous, straight and curved cuts, r ight
Blade length Continuous, straight and curved cuts, left
Sheet thickness (600 N/mm²)
Short, straight and narrow curved cuts,right
Product lifeexpectancy
Short, straight and narrow curved cuts, left
HSS-TIN min. 65 HRC
Straight and curved cuts with a largeradius in both left and right directions
HSS min. 65 HRC
Continuous, straight cuts
Special High grade steel min. 61 HRC
Short, straight cuts, notch
High grade steelmin. 59 HRC
Circular cuts
Quality steel min. 56 HRC
L = Left cut design (refer to page 128 as well) SB = On carded hang pack
Standard tin snips with a rocker spring, available on request for an extra charge.
Warning and usage notices:
General:
■ Only use the hand tool properly. Observe the enclosed operating instructions.
■ Never change or modify tools. They are only permitted to be used in their original state.
Only use original spare parts if required. Exceptions: Sharpen cutting tools properly.
■ Never work with damaged tools. Damaged tools must be replaced immediately.
■ Handles must be free of oil and grease.
■ Tasks while clamped may only be carried out by trained staff using VDE tools that are
suitable for this purpose.
■ Wear safety goggles for all tasks in which chips may be formed or in which parts can
ake off.
■ Protect your hands by wearing working or assembly gloves depending on the task.
■ Select a stable base to ensure safe standing. Wear safety shoes.
■ Observe the maintenance instructions. Proper use can only be guaranteed if the tools
are maintained regularly. The maintenance instructions are provided at www.bessey.de.
■ Furthermore, the relevant safety precautions from the various institutions such as the
regulations from the accident prevention and insurance associations, instructions from
your employer and the legal regulations of the appropriate country also apply.
Clamping tools: ■ Clamping tools are not suitable for lifting, pulling or transporting.
■ Clamping tools may only be clamped manually without using any auxiliary tools.
■ Improper use can cause personal injuries or material damage.
■ Never change or modify clamping tools. Only use them in their original condition. Only use
original spare parts if required.
Cutting tools:
■ Manual sheet metal snips may only be used to cut thin sheets of soft metals or steel.
They are not suitable for cutting through round or rectangular section metal shapes such
as wires.
■ Cutting tools may only be used manually without using any auxiliary tools.
■ Always wear safety goggles and gloves when working. Cut parts can injure workers and
bystanders.
■ Improper use can cause personal injuries or material damage.
■ Disconnect the connection to the power supply when carrying out work on electrical
equipment. Otherwise, you may get an electric shock.
■ Always cut away from the head when using snips and knives.
■ Always store cutting tools with the cutting edges closed and in a location where they are
clearly visible. The handle must be pointing towards you.
■ Store cutting tools separately. This saves the cutting edges and your ngers.
■ Sharpen cutting tools regularly. Blunt tools increase the risk of injury and require more
force for the same cutting performance.
Pliers:
■ Wear safety goggles and gloves while working. Cut parts can injure workers and
bystanders. ■ Disconnect the connection to the power supply when carrying out work on electrical
equipment. Otherwise, you may get an electric shock.
■ Never use pliers as a hammer.
■ Check the jaws for wear. Worn jaws cause slipping and result in accidents.
■ Grip pliers are only suitable for xing workpieces for a short time.
General product information:
1. BESSEY reserves the right to change the technical specications at any time. It is pos-sible that certain product specications may differ from region to region, to satisfy the
international market.
2. All illustrations produced by BESSEY and that show BESSEY tools in use are only intended
to provide the person viewing them with an impression of the tool's relevant area of
application. When taking the photographs, safety clothing such as gloves was sometimes
not worn, in order to demonstrate t he products better. However, this does not relieve the
customer of their obligation to wear suitable safety clothing when working with BESSEY
clamping and cutting tools.
3. The customer takes sole responsibility for condentiality and use of information on a pro-duct and for using or operating a product. BESSEY explicitly rejects any liability for direct,
indirect, accidental or subsequent damage. Furthermore, all claims for damages, compen-sation for loss and other claims are limited to the purchase price of the relevant product.
Self-adjusting toggle clamps STC
Clamping up to 5 x faster
Page 76 - 85
Price per piece
All prices are non-binding recommended prices without sales tax.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
3/168
3
12-21
22-23
24-31
32-35
36-41
42-43
44-47
48-49
50-53
54-55
BESSEY Clamping Technology
Table of contents
Malleable cast ironscrew clamps
Malleable cast ironscrew clamp TG – wi th 2-component
plastic handle – wi th t ried -and -true
wooden handle – wi th tommy bar
Heavy duty malleable
cast iron screw clampTGK – wi th 2-component
plastic handle – wi th t ried -and -true
wooden handle – wi th tommy bar
Pressure cap strips
SKS
Malleable cast ironscrew clamp TPN – wi th 2-component
plastic handle
– wi th t ried -and -truewooden handle
Heavy duty malleablecast iron screw clamp
TKPN – wi th t ried -and -true
wooden handle
Malleable cast ironscrew clamp TGRC – wi th t ried -and -true
wooden handle – wi th tommy bar
Heavy duty malleablecast iron screw clamp
TGKR – wi th t ried -and -true
wooden handle
Deep throat screw
clamp TGNT – wi th t ried -and -true
wooden handle – wi th tommy bar
Pump clamps
Pump clamp PZ
All-steel screw clamps
All-steel screw clamp
GZ – with 2-component
plastic handle – with tried-and- true
wooden handle – with tommy bar
All-steel screw clampclassiX GS – with tried-and- true
wooden handle – with tommy bar
OMEGA screw clampGMZ – with 2-component
plastic handle – with tommy bar
Pressure cap strips
SKS
Lever clamps
Lever clamp GH
Lever clamp classiX
GSH
Lever clamp SGHS,heavy duty
High-performanceclamps
Fitters‘ clamp SLM
High-performance clamp
SGM
High-performance clamp
SGTM,large throat depth
High-performance clamp
STBM,heavy duty
High-performance clamp
STBS,extremely heavy duty
High-performance clamp
STBVC,extremely heavy duty
Special pressure plate
with sintered steelinsert
Fitters‘ clamp
classiX GSLHigh-performance clampclassiX GSM
KombiKlamp
KombiKlamp
SG-VAD
U-shaped clamps
U-shaped clamps GUZ,SGU, STBU
U-shaped lever clamp
GUH
Special pressure platewith sintered steelinsert
Claw clamps
Claw clamp GRAPressure piece GRD
Variable screw clamps
High-performanceclamp set SLV / GSV
Special pressure platewith sintered steelinsert
Rails for size SLV / GSV
Sliding arm for size
SLV / GSV
C-clamps
C-clamp VC, SC, CDF-C
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
4/168
56-57
58
59
60-61
62-69
70-75
76-85
86-89
90-93
4
BESSEY Clamping Technology
Table of contents
Grip pliers
Parallel grip GRZ
C-grip GRZC
Variogrip GRZV
Pipe grip GRZRO
Earth (ground) clamps
Earth (ground) clamp
LP, TP, TGP
Earth (ground) clamp TPwith ring
Earth (ground) clamp CP
Clamping devices
Multi angle pad VAD
Pipe clamping set RO
Metal angle clamps
Welders‘ angle clamps
WSMWelding clamp set
SM 10
Clamping elements forwelding tables
Clamping elements – wi th variable throat
depth TWV – with fixed throat
depth TW
Clamping element forwelding tables withspecial pressure plate
TWM28
Special pressure platewith sintered steelinsert
Clamping element forwelding tables withgripping arm TW28GRS
Vario table clampingattachment TWVAD
Toggle clamp adapter
TWA-STC
Extension TWX
Tilting adapter
TW28AV
Attachment TW28HO
Machine table clamps
Machine table clamp
BAS-C, BAS-CB
Base unit BASOWrench with T-bar
BASKN
Hold down table clamp
BS
Claw machine clamp
GRS
Hold down table clamp
BSG
Toggle clamps
Vertical toggle clamp
STC-VH – wi th horizontal base
plate
Horizontal toggle clampSTC-HH, -HV, -HA – wi th horizontal base
plate
– wi th vertica l baseplate
– wi th angled base plate
Push/pull clamp
STC-IHH – wi th horizontal base
plate
– wi th angled base plate
Counter display toggleclamp STC-D
Body clamps and areapressure clamps
K Body REVO KR K Body REVO Vario KRV
Accessories:Variable jaw KR-VO
Adapter KR-AS Framing set KP Extender KBX
UniKlamp UK
Area pressure clamp FK
Frame clamp KS
One-handed clamps
One-handed clamp EHZ – wi th 2-component
plastic handle
DuoKlamp DUO
One-handed clamp EZS / EZ
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
5/168
5
94-95
96-103
104-105
106-107
108-109
110-112
113-115
116-119
119
120-121
122-123
124-125
BESSEY Clamping Technology
Table of contents
Rafter clamps
Rafter clamp SPZ
Special pressure platewith sintered steelinsert
Lightweight clamps
KliKlamp KLI
Light duty bar clampU-style LMUDie-cast zinc screwclamp LM
Wood-Klemmy HKL
Aluminium mini clamp
AM
Parallel screw clamp PA
Mini Vice S 10Table clamp TK
All-steel table clamp
GTRAll-steel table clamp
GTRH with lever handle
Spring clamps
VarioClippix XVClippix XCClippix XCL ,Needle nose springclamp
Band clamps
Band clamp
BAN 700, BAN 400Vario corners BVE
Angle and mitre clamps
Angle clamp
WS 3, WS 6, WS 1
Mitre clamp GSMitre clamping system
MCX
Edge clamps
One-handed edge clamp
EKT
Edge clamp Kantenfix
KF
Edge clamp KT
C-frame edge clamp
KT, CKT
Panel carrier KFP
Clamping elements for
workbenches
Workbench adapter
TW16AW19
Clamping element withvariable throat depth
TWV16
Clamping element withfixed throat depth TW16
Door frame and windowassembly tools
Door frame clamp
TU, TMS
Door frame clampextender TUX
Door framestraightening clamp
TFM / Angle door framestraightening clamp
WTR
Window installationclamp FRK
Sash clamp
TAN, TB
Pipe clamping set
Pipe clamping set BPC
Special flooring tools
Spacer AV2
Spacer PVA
Flooring clamp PVZ
Flooring and clampingsystem SVH, SVG
Seaming tools
Seaming tool PS 130,big and strong
Seaming tool PS 55
POS Presentation
Clamp trolley ZW, VFW
N E W
N E W
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
6/168
130-139
140-143
144-150
151-153
6
Compound leverage snips
Shape and straightcutting snipsthe latest generation
D39ASS
Shape and straightcutting snips
D29ASS-2/D27A/D17A/D08
Shape cutting snips
D29SS-2/D27
Straight cutting snips
D29BSS-2/D27B
MULTISNIP Longstyle
D22A
Aviaton snips
D16/D16L/D16S
Shape and straight
cutting snips
D15A
High-performance snipswith HSS edges
Shape and straightcutting snips HSS -TiN
D27AH-TiN
Shape and straight
cutting snips HSS
D27AH
Punch snips HSS
D407
Shape and straight
cutting snips HSSD416
Pelican snips HSS
D418
Standard tin snips
Shape and straightcutting snips
D216/D116
Shape and straight cutting
snips, without opening stop
D216-B-SBSK
Pelican snipsD218/D118
Shape cutting punch snips
D214/D114
Punch snips
D207/D107
Punch snips with curved blades
D208
Universal snips
D206/D106
Universal snips
with wide bladesD106A
Berlin pattern snips
D202/D102
English pattern snips
D159
American pattern snips
D146
Display DVK , unstocked
Multi-purpose cutters
Multi-purpose cutters
D47-2/D48-2/D48A-2
Cable cutter
D49-2
BESSEY Cutting Technology
Table of contents
N E W
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
7/168
5
154-155
156-157
158-159
160-161
162-165
7
MULTISNIP Master
D51A
Multi-purpose cutters
D47/D48/D48A
Cable cutter
D49
Combinox
D50
Folding utility knives
and multitool
Bladed jack knife
DBKPH/DBKWH/DBKAH
Spare blades
DBK-T/DBK-H/DBK-L/DBK-A
Knife-set
DBKPH
MultitoolDBST
Jewellers’ and thin sheet snips
Jewellers’ snips
D70/D71/D72/D73/D74/D75/D76/D77
Household andmulti-purpose shears
Multi-purpose shears
D820/D821
Electricians’ scissors
D53
Household anddressmakers’ shears
D840
Paperhangers’ and
paper shears
D851/D853
Industrial andprofessional shears
D860
Steel strap cutters
Safety strap cutter withcompound leverage
D123S
Steel strap cutters
D122N/D122A
Tools for sheet metal
work and plumbing
Seaming and clinching pliers
D33/D331/D34/D341/D35/D351
Seaming and clinching pliers
D33...P/D331...P/D34...P/D341...P/D35...P/D351...P
Mini folding pliers
D331-22/D341-22
Flat-nosed pliers
for sheet metal workD301
Round nosed pliers
D311
Folding pliers
D355
Corner seaming
and clinching pliers
D335
Squeeze folding pliers
D336
Crimper
D36
Gutter support bowing pliers
D396
BESSEY Cutting Technology
Table of contents
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
8/168
8
Innovation with tradition
In 1889, Max BESSEY founded the company BESSEY
& Sohn in Stuttgart as a bright steel drawing plant.
Since then, the company has continuously expanded
the range of products it offers. It was this spirit that
led BESSEY to begin production of manual clamping
tools in the mid-1930s. Since then, the strength of
its innovation has been underlined by the granting
of numerous patents. In 1979, with the takeover of
Diener Werkzeugfabrik GmbH, a company rich in
tradition, BESSEY established its cutting technology
unit with the already popular Erdi snips.
In 2004 BESSEY & Sohn was spun into BESSEY Tool
GmbH & Co. KG, handling the clamping and cutting
technology areas, and BESSEY Präzisionsstahl GmbH,
a leading German producer-independent and industry-
independent supplier of high-quality bright and
stainless steels. This unique positioning of BESSEY
as a producer of tools and precision steels ensures
significant advantages in terms of quality.
It allows BESSEY Tool to procure its rails and spindles
directly from the BESSEY Präzisionsstahl GmbH,
giving it precise knowledge of the steel quality that is
going into particular components which are subjected
to particular high stresses. This is because brightsteels are produced and tested at BESSEY Precision
Steel with consistently high quality and the utmost
precision, in cutting-edge facilities.
“To stop improving is to stop being good.” The motto
of company founder Max Bessey remains true today,
as it will in the future, and is the guiding principle to
everything that the company does.
BESSEY – an unprecedented story
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
9/168
9
1889 Max Bessey founds a bright steel drawing plant in Stuttgart.
1912 Continuation of the firm by his nephew Karl Bessey.
1926 The company is taken over by Dr. Ing. Eugen Mayer. Under his leadership, the range ofproducts produced is significantly expanded, both in terms of dimensions and gradesof steel offered.
1928 1928 marriage of Dr. [Eng.] Eugen Mayer and Erna Bessey, widow of Karl Bessey
1936 Patents granted for a new type of malleable cast iron screw clamp, thus marking thebeginning of the production of clamping tools by Bessey.
1944 Founding of a subsidiary in Bietigheim for producing clamping tools.
1952 Patent granted for a tempered all-steel clamp.
1961 Expansion of the Bietigheim works and beginning of bright steel production.
1966 Dr. Mayer succeeded by his daughter, Dr. Erna Fetscher and son, Dr. Theodor Mayer,who becomes Managing Partner.
Start of a dynamic phase of corporate development:
Q Production of bright steel is doubled and complemented by the manufacture ofstainless steels.
Q New patents and developments, combined with modern marketing, make BESSEYinto the market leader in the global clamping tools sector.
1971 A further increase in bright steel production is achieved at the Stuttgart works thanksto the purchase of the neighbouring Aldinger engineering works.
Founding of BESSEY FILS in Strasbourg, from which the company BESSEY-SER arose in1988.
1979 Purchase of the Diener shears factory in Esslingen, with a satellite factory in Solingen.
1983 Consolidation of bright steel production in new mill buildings at the Bietigheim worksand sale of the Stuttgart site.
1985 Purchase of additional land in Bietigheim, including the area of the former worstedspinning mill, which has protected status. After proper restoration, tool productionbegins at this facility.
2003 Takeover of our sales partner in the strategically important North American market.
2004 Takeover of the GROSS STABIL clamping tool brand as part of our global growth strategy.
2007 Integration of GROSS STABIL TOOL to enhance effects of synergy with additional leverage.
2011 Klaus Fuchs becomes Managing Partner – after 11 years, the BESSEY Group is onceagain owner-managed.
2014 The company celebrates 125 years.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
10/168
10
BESSEY. Simply better.
BESSEY locations
The headquarters of the BESSEY Group are located
near Stuttgart, in south west Germany. Since 1983, all
administrative functions as well as Sales, Production,
our laboratory, and the logistics operation for BESSEY
Precision Steel have been consolidated on a 50,000
square metre site in Bietigheim-Bissingen.
The development, manufacture, storage and dispatch
of clamping and cutting tools takes place some 2 km
north of the main works, in the building of the historic,
former Kammgarnspinnerei Bietigheim-Bissingen
(worsted spinning mill).
BESSEY Tools North America, based in Cambridge
Ontario, close to Toronto in Canada, is part of the
BESSEY Group, and handles the whole North American
market in its capacity as a sales and marketing
business.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
11/168
11
With BESSEY ...
... you are placing your trust in quality
Precision and long life are at the core of the BESSEY
brand‘s quality. The tools have traditionally been
manufactured from the highest-grade materials.
Thus, the steel for the manufacturing of rails and
spindles, for example, comes directly from BESSEY
Präzisionsstahl GmbH. In addition, all components are
tested by experienced technicians and development
engineers using ultramodern process control
techniques.
... you are placing your trust in innovation“To stop improving is to stop being good.” The motto
of company founder Max Bessey remains true today
and is the guiding principle to everything that the
company does. New products and improvements thus
continue to be developed on a long-term basis from
innovative ideas, making the operator‘s work easier.
The focus is on convenience and safety. User-friendly
operation and ergonomics represent the highest
benchmark.
... you are placing your trust in variety
Thanks to the designers‘ many years of experience
and to continuous communication with customers,
BESSEY has a strong awareness of problem-solving.
The result is clamping and cutting tools true to our
guiding principle: “BESSEY. Simply better.” With over
1,600 products, BESSEY now offers a tremendously
wide and deep range of items customised to special
requirements.
... you are placing your trust in service
Reliability, confidence and sense of responsibility are
the backbone of our partnership with the environment
and customers. BESSEY has distinguished itself as an
extremely service-oriented and futuristic company. We
are also supporting our trading partners, for instance,
with comprehensive product training programs. Thisis clearly a complete partnership.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
12/168
12
Malleable cast iron screw clamps
Powerful, rigid clamping
The unmistakable classic
Often copied, never equalled: the original malleable
cast iron screw clamps from BESSEY – the classic
screw clamps dating back to 1936. Unmistakable,
thanks to their unique high-quality profiled rail
and their characteristic malleable cast iron arms,
serrated for reinforcement. The integrated BESSEY
anti-slip system additionally ensures maximum
safety. This is why the original BESSEY malleable
cast iron screw clamps have proved so successful
for so many years. And so ideal for all applications
where powerful, rigid clamping is required. Try
them out for yourself!
The screw clamp TGK –
extremely stable, especially
for high clamping pressures
and wide openings.
The deep throat clamp
TGNT –
for large-scale jobs and
throat depths of up
to 500 mm.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
13/168
Malleable cast iron screw clamps
13
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
14/168
14
Original BESSEY malleable cast iron screw clamp
Only the original can be the best
Your benefits at a glance:
1 Integrated BESSEY anti-slip system
Maximum safety is available with the
integrated BESSEY anti-slip system,
when clamping with a throat depth of
80 mm or more. A set screw that is
molded into the sliding arm interlocks
with the serration on the rail. This
effectively prevents the clamp from
dislodging or slipping away.
2 Reinforced malleable cast iron arms
The characteristic high-quality malle-
able cast iron fixed and sliding arms,
with specially designed wave profile tominimise flexing and provide maximum
clamping force. The powder coating
provides additional protection against
corrosion.
3 High-quality profiled rail
The BESSEY profiled rail from our owndrawing plant has been especially opti-
mised for clamps. The serration on six
faces additionally prevents the clamp
from slipping.
4 Pressure plate
For enhanced serviceability the
pressure plate can be changed with
no need for tools. It can be replaced
very easily and quickly.
Noticeably more comfortable
The choice is yours: The original BESSEY malleable
cast iron screw clamp is available in three different
designs. Either with the 2-component plastic handle,
the tried-and-true wooden handle, or with the robust
tommy bar. The latter will allow you to complete tasks
more effectively and with less fatigue. This is possible
thanks to the high-quality 2-component plastic handle,
which has been especially developed for use with
screw clamps. New pressure plates, which can be
replaced without tools, add versatility to your clamp
as well as making repairs quick & easy. Feel the
difference!
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
15/168
Malleable cast iron screw clamps
15
■ Clamping force up to 6,000 N
■ High-quality 2-component plastic
handle■ Pressure plates can be replace by hand
– no tools required (from 80 mm throat
depth)
■ With protective caps on the clamping
surfaces
■ Stable profiled rail with serration
■ BESSEY anti-slip system (from 80 mm
throat depth)
Original BESSEY malleable cast iron screw clamp TG
with 2-component plastic handle
mm mm mm kg qty. VB0001
TG10-2K 100 50 15 x 5 0.26 10 13,60
TG12-2K 120 60 20 x 5 0.42 10 18,10
TG16-2K 160 80 25 x 6 0.66 10 21,60
TG20B8-2K 200 80 25 x 6 0.77 10 21,90
TG25B8-2K 250 80 25 x 6 0.82 10 22,50
TG30B8-2K 300 80 25 x 6 0.87 10 23,70
TG40B8-2K 400 80 25 x 6 0.97 10 25,50
TG20-2K 200 100 27 x 7 1.06 10 29,80
TG25S10-2K 250 100 27 x 7 1.15 10 32,80
TG30S10-2K 300 100 27 x 7 1.18 10 34,60
TG40S10-2K 400 100 27 x 7 1.33 10 37,70
TG50S10-2K 500 100 27 x 7 1.46 10 39,40TG25-2K 250 120 29 x 9 1.54 10 36,20
TG30S12-2K 300 120 29 x 9 1.63 10 39,00
TG40S12-2K 400 120 29 x 9 1.78 10 42,20
TG50S12-2K 500 120 29 x 9 2.01 10 45,30
TG60S12-2K 600 120 29 x 9 2.13 5 48,00
TG80S12-2K 800 120 29 x 9 2.46 5 53,80
TG100S12-2K 1000 120 29 x 9 2.83 5 60,10
TG30-2K 300 140 32 x 10 2.20 10 45,00
TG40S14-2K 400 140 32 x 10 2.41 5 50,70
TG50S14-2K 500 140 32 x 10 2.62 5 54,80
TG60S14-2K 600 140 32 x 10 2.85 5 58,80
TG80S14-2K 800 140 32 x 10 3.29 5 66,90
TG100S14-2K 1000 140 32 x 10 3.71 5 76,20
TG40-2K 400 175 32 x 10 2.70 5 54,50
TG50S17-2K 500 175 32 x 10 2.90 1 60,30
TG60S17-2K 600 175 32 x 10 3.20 1 64,00
TG80S17-2K 800 175 32 x 10 3.50 1 72,00
TG100S17-2K 1000 175 32 x 10 4.03 1 80,40
■ Clamping force up to 7,000 N
■ Strengthened design for higher
clamping force and wider opening
widths
■ High-quality 2-component plastic
handle
■ Pressure plates can be replaced byhand – no tools required
■ Stable profiled rail with serration
■ BESSEY anti-slip system
Heavy duty malleable cast iron screw clamp TGK
with 2-component plastic handle
mm mm mm kg qty. VB0001
TGK40-2K 400 120 35 x 11 2.52 5 50,60
TGK50-2K 500 120 35 x 11 2.70 5 55,40
TGK60-2K 600 120 35 x 11 3.00 5 58,40TGK80-2K 800 120 35 x 11 3.53 5 65,90
TGK100-2K 1000 120 35 x 11 4.00 5 73,60
TGK125-2K 1250 120 35 x 11 4.69 1 80,00
TGK150-2K 1500 120 35 x 11 5.38 1 87,70
TGK200-2K 2000 120 35 x 11 6.66 1 106,80
TGK250-2K 2500 120 35 x 11 7.94 1 129,20
TGK300-2K 3000 120 35 x 11 9.22 1 152,80
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
16/168
Malleable cast iron screw clamps
16
■ Clamping force up to 6,000 N
■ Ergonomically shaped wood handle
■ Pressure plates can be replaced byhand – no tools required (from 80 mm
throat depth)
■ With protective caps on the clamping
surfaces
■ Stable profiled rail with serration
■ BESSEY anti-slip system (from 80 mm
throat depth)
Original BESSEY malleable cast iron screw clamp TG
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TG10 100 50 15 x 5 0.26 10 12,90
TG15B5 150 50 15 x 5 0.29 10 14,70
TG20B5 200 50 15 x 5 0.33 10 15,20
TG12 120 60 20 x 5 0.42 10 17,30
TG20B6 200 60 20 x 5 0.49 10 17,90
TG30B6 300 60 20 x 5 0.56 10 21,00
TG16 160 80 25 x 6 0.66 10 20,60
TG20B8 200 80 25 x 6 0.77 10 20,90
TG25B8 250 80 25 x 6 0.82 10 21,50
TG30B8 300 80 25 x 6 0.87 10 22,70
TG40B8 400 80 25 x 6 0.97 10 24,50
TG20 200 100 27 x 7 1.06 10 28,50
TG25S10 250 100 27 x 7 1.15 10 31,50
TG30S10 300 100 27 x 7 1.18 10 33,30
TG40S10 400 100 27 x 7 1.33 10 36,40
TG50S10 500 100 27 x 7 1.46 10 38,10
TG25 250 120 29 x 9 1.54 10 34,60
TG30S12 300 120 29 x 9 1.63 10 37,40
TG40S12 400 120 29 x 9 1.78 10 40,60
TG50S12 500 120 29 x 9 2.01 10 43,70
TG60S12 600 120 29 x 9 2.13 5 46,40TG80S12 800 120 29 x 9 2.46 5 52,20
TG100S12 1000 120 29 x 9 2.83 5 58,50
TG30 300 140 32 x 10 2.20 10 43,20
TG40S14 400 140 32 x 10 2.41 5 48,90
TG50S14 500 140 32 x 10 2.62 5 53,00
TG60S14 600 140 32 x 10 2.85 5 57,00
TG80S14 800 140 32 x 10 3.29 5 65,10
TG100S14 1000 140 32 x 10 3.71 5 74,40
TG40 400 175 32 x 10 2.70 5 52,70
TG50S17 500 175 32 x 10 2.90 1 58,50
TG60S17 600 175 32 x 10 3.20 1 62,20
TG80S17 800 175 32 x 10 3.50 1 70,20
TG100S17 1000 175 32 x 10 4.03 1 78,60
■ For screw clamps
■ For gentle clamping
■ May be applied on both sides
■ Cut them to size
Pressure cap strips SKS (2 pcs./bag)
Suitable for
VB0003
SKS10/20TG10 to TG20 / GZ10 to GZ20 /
GM16Z to GM20Z6,55
SKS20/40TG20 to TG40 / TGK / GZ20 to GZ60 /
GM20Z to GM60Z 6,75
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
17/168
Malleable cast iron screw clamps
17
■ Clamping force up to 7,000 N■ Heavy duty, reinforced design for higher
clamping force and wider opening
widths
■ Ergonomically shaped wood handle
■ Pressure plates can be replaced by
hand – no tools required
■ Stable profiled rail with serration
■ BESSEY anti-slip system
Heavy duty malleable cast iron screw clamp TGK
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TGK40 400 120 35 x 11 2.52 5 48,80
TGK50 500 120 35 x 11 2.70 5 53,60
TGK60 600 120 35 x 11 3.00 5 56,60
TGK80 800 120 35 x 11 3.53 5 64,10
TGK100 1000 120 35 x 11 4.00 5 71,80
TGK125 1250 120 35 x 11 4.69 1 78,20
TGK150 1500 120 35 x 11 5.38 1 85,90
TGK200 2000 120 35 x 11 6.66 1 105,00
TGK250 2500 120 35 x 11 7.94 1 127,40
TGK300 3000 120 35 x 11 9.22 1 151,00
■ Clamping force up to 6,000 N
■ Tommy bar with rounded ends for
simple transfer of force when clamping
■ Pressure plates can be replaced by
hand – no tools required
■ With protective caps on the clampingsurfaces
■ Stable profiled rail with serration
■ BESSEY anti-slip system
Original BESSEY malleable cast iron screw clamp TG
with tommy bar
mm mm mm kg qty. VB0001
TG16K 160 80 25 x 6 0.73 10 21,60
TG20K 200 100 27 x 7 1.08 10 29,80
TG25K 250 120 29 x 9 1.48 10 36,20
TG30S12K 300 120 29 x 9 1.57 10 39,00
TG40S12K 400 120 29 x 9 1.74 10 42,20
TG60S12K 600 120 29 x 9 2.09 5 48,00
TG30K 300 140 32 x 10 2.10 10 45,00
TG40K 400 175 32 x 10 2.70 5 54,50
■ Clamping force up to 7,000 N
■ Strengthened design for higher
clamping force and wider opening
widths
■ Tommy bar with rounded ends for
simple transfer of force when clamping
■ Pressure plates can be replaced by
hand – no tools required
■ Stable profiled rail with serration
■ BESSEY anti-slip system
Heavy duty malleable cast iron screw clamp TGK
with tommy bar
mm mm mm kg qty. VB0001
TGK50K 500 120 35 x 11 2.70 5 55,40
TGK100K 1000 120 35 x 11 4.00 5 73,60
TGK150K 1500 120 35 x 11 5.31 1 87,70
TGK200K 2000 120 35 x 11 6.50 1 106,80
TGK250K 2500 120 35 x 11 7.83 1 129,20
TGK300K 3000 120 35 x 11 9.13 1 152,80
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
18/168
Malleable cast iron screw clamps
18
■ Clamping force up to 5,500 N■ High-quality 2-component plastic
handle
■ With protective caps on the clamping
surfaces
■ Stable profiled rail with serration
Malleable cast iron screw clamp TPN
with 2-component plastic handle
mm mm mm kg qty. VB0001
TPN16BE-2K 160 80 25 x 6 0.73 10 16,50
TPN20BE-2K 200 100 27 x 7 1.06 10 22,70
TPN25BE-2K 250 120 29 x 9 1.50 10 27,60
TPN40S12BE-2K 400 120 29 x 9 1.74 10 32,10
TPN50S12BE-2K 500 120 29 x 9 2.00 10 34,40
TPN60S12BE-2K 600 120 29 x 9 2.10 5 36,40
TPN80S12BE-2K 800 120 29 x 9 2.50 5 40,80
TP100S12BE-2K 1000 120 29 x 9 2.80 5 45,50
TPN30BE-2K 300 140 32 x 10 2.03 10 34,20
TPN40BE-2K 400 175 32 x 10 2.70 5 41,30
■ Clamping force up to 5,500 N
■ Ergonomically shaped wood handle
■ With protective caps on the clamping
surfaces
■ Stable profiled rail with serration
Malleable cast iron screw clamp TPN
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TPN10BE 100 50 15 x 5 0.26 10 9,70
TPN15B5BE 150 50 15 x 5 0.29 10 11,00
TPN20B5BE 200 50 15 x 5 0.31 10 11,40
TPN12BE 120 60 20 x 5 0.40 10 13,00
TPN20B6BE 200 60 20 x 5 0.45 10 13,40
TPN16BE 160 80 25 x 6 0.73 10 15,50
TPN20B8BE 200 80 25 x 6 0.77 10 15,70
TPN25B8BE 250 80 25 x 6 0.84 10 16,10
TPN30B8BE 300 80 25 x 6 0.87 10 17,00
TPN20BE 200 100 27 x 7 1.16 10 21,40
TPN25S10BE 250 100 27 x 7 1.23 10 23,60
TPN30S10BE 300 100 27 x 7 1.29 10 25,00
TPN40S10BE 400 100 27 x 7 1.41 10 27,30
TPN25BE 250 120 29 x 9 1.54 10 26,00
TPN30S12BE 300 120 29 x 9 1.61 10 28,10
TPN40S12BE 400 120 29 x 9 1.77 10 30,50
TPN50S12BE 500 120 29 x 9 1.97 10 32,80
TPN60S12BE 600 120 29 x 9 2.15 5 34,80
TPN80S12BE 800 120 29 x 9 2.46 5 39,20
TP100S12BE 1000 120 29 x 9 2.83 5 43,90
TP125S12BE 1250 120 29 x 9 3.20 5 49,10
TP150S12BE 1500 120 29 x 9 3.70 5 54,90
TPN30BE 300 140 32 x 10 2.03 10 32,40
TPN40S14BE 400 140 32 x 10 2.30 5 36,70
TPN50S14BE 500 140 32 x 10 2.48 5 39,80
TPN60S14BE 600 140 32 x 10 2.66 5 42,80
TPN80S14BE 800 140 32 x 10 3.12 5 48,80
TP100S14BE 1000 140 32 x 10 3.62 5 55,80
TP150S14BE 1500 140 32 x 10 4.68 1 72,80
TP200S14BE 2000 140 32 x 10 5.76 1 89,50
TPN40BE 400 175 32 x 10 2.70 5 39,50
TPN60S17BE 600 175 32 x 10 3.16 5 46,70
TPN80S17BE 800 175 32 x 10 3.58 5 52,70
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
19/168
Malleable cast iron screw clamps
19
■ Clamping force up to 6,500 N■ Strengthened design for higher
clamping force and wider opening
widths
■ Ergonomically shaped wood handle
■ Stable profiled rail with serration
Heavy duty malleable cast iron screw clamp TKPN
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TKPN50BE 500 120 35 x 11 2.70 5 40,20
TKPN60BE 600 120 35 x 11 2.97 5 42,50
TKPN80BE 800 120 35 x 11 3.48 5 48,10
TKPN100BE 1000 120 35 x 11 4.05 5 53,90
TKPN125BE 1250 120 35 x 11 4.65 1 58,70
TKPN150BE 1500 120 35 x 11 5.34 1 64,40
TKPN200BE 2000 120 35 x 11 6.67 1 78,80
■ Clamping force up to 5,500 N
■ Ergonomically shaped wood handle
■ With protective caps on the clamping
surfaces
■ Stable solid flat rail with serration
Malleable cast iron screw clamp TGRC
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TGRC10 100 50 15 x 5 0.26 10 9,30
TGRC15B5 150 50 15 x 5 0.29 10 10,60
TGRC20B5 200 50 15 x 5 0.31 10 10,90
TGRC12 120 60 20 x 5 0.43 10 12,50
TGRC20B6 200 60 20 x 5 0.49 10 12,90
TGRC30B6 300 60 20 x 5 0.56 10 15,10
TGRC16 160 80 25 x 6 0.73 10 14,80TGRC20B8 200 80 25 x 6 0.77 10 15,00
TGRC25B8 250 80 25 x 6 0.82 10 15,50
TGRC30B8 300 80 25 x 6 0.87 10 16,30
TGRC20 200 100 27 x 7 1.30 10 20,50
TGRC25S10 250 100 27 x 7 1.28 10 22,70
TGRC30S10 300 100 27 x 7 1.48 10 24,00
TGRC40S10 400 100 27 x 7 1.64 10 26,20
TGRC25 250 120 29 x 9 1.54 10 24,90
TGRC30S12 300 120 29 x 9 1.68 10 26,90
TGRC40S12 400 120 29 x 9 1.80 10 29,20
TGRC50S12 500 120 29 x 9 2.07 10 31,50
TGRC60S12 600 120 29 x 9 2.26 5 33,40
TGRC80S12 800 120 29 x 9 2.66 5 37,60
TGRC100S12 1000 120 29 x 9 2.85 5 42,10
TGRC30 300 140 32 x 10 2.10 10 31,10
TGRC40S14 400 140 32 x 10 2.40 5 35,20
TGRC50S14 500 140 32 x 10 2.71 5 38,20
TGRC60S14 600 140 32 x 10 2.92 5 41,00
TGRC80S14 800 140 32 x 10 3.43 5 46,90
TGRC100S14 1000 140 32 x 10 3.78 5 53,60
TGRC150S14 1500 140 32 x 10 5.05 1 69,90
TGRC40 400 175 32 x 10 2.67 5 37,90
TGRC50S17 500 175 32 x 10 2.99 1 42,10
TGRC60S17 600 175 32 x 10 3.17 1 44,80
TGRC80S17 800 175 32 x 10 3.50 1 50,50
TGRC100S17 1000 175 32 x 10 4.00 1 56,60
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
20/168
Malleable cast iron screw clamps
20
■ Clamping force up to 6,500 N■ Strengthened design for higher
clamping force and wider opening
widths
■ Ergonomically shaped wood handle
■ Stable solid flat rail with serration
Heavy duty malleable cast iron screw clamp TGKR
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TGKR50 500 120 35 x 11 2.70 5 38,60
TGKR60 600 120 35 x 11 2.90 5 40,80
TGKR80 800 120 35 x 11 3.50 5 46,20
TGKR100 1000 120 35 x 11 4.00 5 51,70
TGKR125 1250 120 35 x 11 4.70 1 56,30
TGKR150 1500 120 35 x 11 5.20 1 61,80
TGKR200 2000 120 35 x 11 6.50 1 75,60
■ Clamping force up to 5,500 N
■ Tommy bar with rounded ends for sim-
ple transfer of force when clamping
■
With protective caps on the clampingsurfaces
■ Stable solid flat rail with serration
Malleable cast iron screw clamp TGRC
with tommy bar
mm mm mm kg qty. VB0001
TRC20KF 200 100 27 x 7 1.27 10 21,80
TRC25S10KF 250 100 27 x 7 1.35 10 24,00
TRC30S10KF 300 100 27 x 7 1.45 10 25,30
TRC40S10KF 400 100 27 x 7 1.49 10 27,50
TRC50S10KF 500 100 27 x 7 1.80 10 28,70
TRC25S12KF 250 120 29 x 9 1.56 10 26,50
TRC30S12KF 300 120 29 x 9 1.60 10 28,50
TRC40S12KF 400 120 29 x 9 1.76 10 30,80
TRC50S12KF 500 120 29 x 9 1.94 10 33,10
TRC60S12KF 600 120 29 x 9 2.12 5 35,00
TRC80S12KF 800 120 29 x 9 2.48 5 39,20
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
21/168
Malleable cast iron screw clamps
21
■ Clamping force up to 7,000 N
■ Heavy-duty design
■ Ergonomically shaped wood handle
■ Large, stable solid flat rail with
serration
■ Rail dimensions great than and equal to
40 x 11 are ungalvanized
Deep throat clamp TGNT
with tried-and-true wooden handle
mm mm mm kg qty. VB0001
TGN30T20 300 200 35 x 11 3.11 1 59,70
TGN40T20 400 200 35 x 11 3.41 1 64,10
TGN60T20 600 200 35 x 11 3.97 1 72,80
TGN80T20 800 200 35 x 11 4.67 1 81,20
TGN100T20 1000 200 35 x 11 5.15 1 89,90
TGN40T25 400 250 40 x 11 4.50 1 81,50
TGN60T25 600 250 40 x 11 5.06 1 91,50
TGN80T25 800 250 40 x 11 5.71 1 100,70
TGN100T25 1000 250 40 x 11 6.63 1 110,80
TGN40T30 400 300 45 x 12 5.58 1 95,40
TGN60T30 600 300 45 x 12 6.41 1 107,10
TGN80T30 800 300 45 x 12 7.39 1 115,80
TGN100T30 1000 300 45 x 12 8.10 1 127,60
TGN150T30 1500 300 45 x 12 10.50 1 155,80
TGN200T30 2000 300 45 x 12 12.80 1 184,10
TGN250T30 2500 300 45 x 12 15.10 1 212,40
TGN40T40 400 400 45 x 12 6.70 1 140,80
TGN60T40 600 400 45 x 12 7.69 1 152,70
TGN80T40 800 400 45 x 12 8.41 1 164,40
TGN100T40 1000 400 45 x 12 9.34 1 176,20
TGN30T50 300 500 45 x 12 8.11 1 158,70TGN60T50 600 500 45 x 12 9.36 1 176,20
TGN80T50 800 500 45 x 12 10.16 1 188,10
■ Clamping force up to 7,000 N
■ Heavy-duty design
■ Tommy bar with rounded ends for
simple transfer of force when clamping
■ Large, stable solid plain rail with fluting
■ Rail dimensions great than and equal to40 x 11 are ungalvanized
Deep throat screw clamp TGNT
with tommy bar
mm mm mm kg qty. VB0001
TGN30T20K 300 200 35 x 11 3.05 1 61,50
TGN40T20K 400 200 35 x 11 3.21 1 65,90
TGN40T25K 400 250 40 x 11 4.36 1 83,30TGN60T25K 600 250 40 x 11 4.98 1 93,30
TGN80T25K 800 250 40 x 11 5.64 1 102,50
TGN40T30K 400 300 45 x 12 5.53 1 97,20
TGN60T30K 600 300 45 x 12 6.29 1 108,90
TGN80T30K 800 300 45 x 12 7.15 1 117,60
TGN40T40K 400 400 45 x 12 6.63 1 142,60
TGN60T40K 600 400 45 x 12 7.52 1 154,50
TGN80T40K 800 400 45 x 12 8.33 1 166,20
TGN30T50K 300 500 45 x 12 8.01 1 160,50
TGN60T50K 600 500 45 x 12 9.16 1 178,00
TGN80T50K 800 500 45 x 12 10.01 1 189,90
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
22/168
22
Pump clamps
Powerful and efficient clamping
Powerful and time-saving
BESSEY pump clamps are used everywhere, where
powerful and quick clamping is needed. Special
feature: The double spindle transmission means
BESSEY pump clamps enable you to work even
more quickly and more efficiently. This means
you save valuable time!
The PZ pump clamp –
universally applicable, for
applications that demand
high clamping force.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
23/168
Pump clamps
23
Your benefits at a glance:
1 Screw mechanism
The specially designed spindle mecha-
nism ensures maximum clamping forces
are achieved. The sealed unit provides
additional protection to the spindle from
environmental and physical damage.
2 Guided clamping bolts
Clamping bolt and pressure plate are
manufactured from a single piece. The
clamping bolt is guided firmly in the
sliding arm, so that the pressure plate
cannot buckle. For even faster set up on
parallel workpieces.3 Integrated BESSEY anti-slip system
Maximum safety is guaranteed with
the integrated BESSEY anti-slip system.
A hardened set screw molded into the
sliding arm grips the serrations in the rail.
This effectively prevents the clamp from
dislodging or slipping away.
4 Stable solid plain rail
The BESSEY solid plain rail from our own
drawing mill is particularly stable. The
serrations also serve to prevent the clamp
from slipping.
■ Clamping force up to 8,000 N
■ Double spindle mechanism for quick
clamping and release
■ Guided, flat clamping bolt for parallel
clamping
■ With protective caps on the clamping
surfaces
■ BESSEY anti-slip system
Pump clamp PZ
mm mm mm kg qty. VB0003
PZ30S10K 300 100 30 x 8 1.70 10 41,90
PZ40S10K 400 100 30 x 8 1.90 10 43,90
PZ60S10K 600 100 30 x 8 2.30 5 46,30
PZ80S10K 800 100 30 x 8 2.70 5 49,80
PZ100S10K 1000 100 30 x 8 3.10 5 53,60
PZ120S10K 1200 100 30 x 8 3.50 5 58,30
PZ30S15K 300 150 35 x 9 2.40 10 56,80
PZ40S15K 400 150 35 x 9 2.60 10 59,60
PZ60S15K 600 150 35 x 9 3.10 5 68,10
PZ80S15K 800 150 35 x 9 3.50 5 77,20
PZ100S15K 1000 150 35 x 9 4.00 5 85,10
PZ120S15K 1200 150 35 x 9 4.50 5 90,20PZ150S15K 1500 150 35 x 9 5.20 5 103,30
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
24/168
24
All-steel screw clamps
Clamp that are resilient, elastic and powerful
The inspiration for many innovative clamping tools
The original BESSEY all-steel screw clamps are the
perfect step up from the original BESSEY malleable
cast iron screw clamps. They clamp resiliently and
elastically, making them an essential aid when
you want your tools to cover a wide range of appli-
cations. In addition, the all-steel screw clamp is a
model for many other innovative BESSEY clamping
tools – e.g. lever clamps, high-performance clamps,
area pressure clamps, one-handed clamps and
rafter clamps.
The OMEGA GMZ screw clamp offers maximum
flexibility and safety thanks to its unique, patented
OMEGA bend, which maintains the clamping
pressure for longer, even when the all-steel screw
clamp is shaken by vibrations. It also ensures that
sensitive surfaces receive the necessary protection
because the clamping pressure can be selected
even more precisely. As with all all-steel screw
clamps, it can also be used for any application,
either for processing wood or metal. You can be
sure of it!
GZ all-steel screw clamp –
all models are equipped
with an optimised rail pro-
file and replaceable pres-
sure plate.
The OMEGA screw clamp
GMZ –
universally applicable, for
everything from wood to
metal processing.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
25/168
All-steel screw clamps
25
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
26/168
26
All-steel screw clamps
BESSEY's unrivalled all-steel quality
Your benefits at a glance:
1 High stability
The optimised profile guarantees high
clamping force build-up in the shortest
time, while maintaining maximum sta-
bility and safety. The fixed bracket and
pressure plate are manufactured in a
single piece, and tempered, so are able
to bear heavy loads and are resistant
to torsion.
2 Forged sliding arm
The sliding arm allows for more effi-
cient transfer of force. As a result of its
more linear transfer of force, the newU-shaped sliding arm offers maximum
security with the heaviest of loads. You
can rely on that.
3 Pressure plate
For enhanced serviceability thepressure plate can be changed with
no need for tools. It can be replaced
very easily and quickly.
4 Smooth-running spindle
The surface-coated spindle with acme
thread is particularly smooth-running,
and does not bind. For even smoother,
more efficient work.
20 % more clamping force
per spindle rotation
Original BESSEY
GZ clamp
Competitor
Light, easy to handle and strong
Whether you choose the 2-component plastic handle,
the wooden handle or the tommy bar, you're guaran-
teed satisfaction if you opt for an original BESSEY
all-steel screw clamp. Especially thanks to BESSEY
unique quality steel. With BESSEY you can be sure
of an extremely high-quality, durable clamping tool
which is also light and easy-to-handle. Even at the
high clamping force, it will retain its dimensions and
resist distortion. So in future, if you are looking for a
powerful, flexible clamping effect, then what you need
is a BESSEY all-steel screw clamp!
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
27/168
All-steel screw clamps
27
■ 20 % more clamping force per spindle
rotation with optimised rail profile
■ Maximum security with linear transfer
of force at the sliding arm
■ Clamping force up to 6,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ High-quality 2-component plastic
handle
■ Pressure plates can be replaced by
hand – no need for tools (from 80 mm
width)
Original BESSEY all-steel screw clamp GZ
with 2-component plastic handle
mm mm mm kg qty. VB0002
GZ10-2K 100 60 15 x 6 0.31 10 14,70
GZ12-2K 120 60 15 x 6 0.32 10 18,40
GZ16-2K 160 80 17.5 x 6.8 0.57 10 22,10
GZ40-8-2K 400 80 17.5 x 6.8 0.76 10 27,20
GZ20-2K 200 100 22 x 8.5 1.01 10 29,80
GZ25-2K 250 120 24.5 x 9.5 1.42 10 36,00
GZ30-12-2K 300 120 24.5 x 9.5 1.50 10 39,00
GZ40-12-2K 400 120 24.5 x 9.5 1.65 10 42,20
GZ50-12-2K 500 120 24.5 x 9.5 1.83 10 45,30
GZ60-12-2K 600 120 24.5 x 9.5 2.00 5 48,30
GZ80-12-2K 800 120 24.5 x 9.5 2.20 5 54,00
GZ100-12-2K 1000 120 24.5 x 9.5 2.45 5 60,10
GZ30-2K 300 140 28 x 11 2.01 10 45,00
GZ40-2K 400 120 28 x 11 2.12 10 51,70
GZ50-2K 500 120 28 x 11 2.33 5 55,40
GZ60-2K 600 120 28 x 11 2.52 5 58,40
GZ80-2K 800 120 28 x 11 2.87 5 70,10
GZ100-2K 1000 120 28 x 11 3.29 5 78,60
GZ125-2K 1250 120 28 x 11 3.83 1 105,70
■ 20 % more clamping force per spindle
rotation with optimised rail profile
■ Maximum security with linear transfer
of force at the sliding arm
■ Clamping force up to 6,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ Ergonomically shaped wood handle
■ Pressure plates can be replaced by
hand – no need for tools (from 80 mm
width)
Original BESSEY all-steel screw clamp GZ
with tried-and-tested wooden handle
mm mm mm kg qty. VB0002
GZ10 100 60 15 x 6 0.30 10 14,00
GZ12 120 60 15 x 6 0.31 10 17,60
GZ30-6 300 60 15 x 6 0.42 10 21,80
GZ16 160 80 17.5 x 6.8 0.52 10 21,10
GZ20 200 100 22 x 8.5 0.95 10 28,50
GZ25 250 120 24.5 x 9.5 1.34 10 34,40
GZ30-12 300 120 24.5 x 9.5 1.43 10 37,40
GZ40-12 400 120 24.5 x 9.5 1.56 10 40,60
GZ30 300 140 28 x 11 1.96 10 43,20
GZ40 400 120 28 x 11 2.06 10 49,90
GZ50 500 120 28 x 11 2.27 5 53,60
GZ60 600 120 28 x 11 2.47 5 56,60
GZ80 800 120 28 x 11 2.82 5 68,30
GZ100 1000 120 28 x 11 3.22 5 76,80
GZ125 1250 120 28 x 11 3.77 1 103,90
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
28/168
All-steel screw clamps
28
■ 20 % more clamping force per spindle
rotation with optimised rail profile
■ Maximum security with linear transferof force at the sliding arm
■ Clamping force up to 6,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ Tommy bar with rounded ends for
simple transfer of force when clamping
■ Pressure plates can be replaced by
hand – no need for tools
Original BESSEY all-steel screw clamp GZ
with tommy bar
mm mm mm kg qty. VB0002
GZ16K 160 80 17.5 x 6.8 0.50 10 22,10
GZ20K 200 100 22 x 8.5 0.93 10 29,80
GZ25K 250 120 24.5 x 9.5 1.31 10 36,00
GZ30K 300 140 28 x 11 1.89 10 45,00
GZ40K 400 120 28 x 11 2.00 10 51,70
GZ50K 500 120 28 x 11 2.20 5 55,40
GZ60K 600 120 28 x 11 2.42 5 58,40
GZ80K 800 120 28 x 11 2.76 5 70,10
GZ100K 1000 120 28 x 11 3.18 5 78,60
GZ125K 1250 120 28 x 11 3.65 1 105,70
■ For screw clamps
■ For gentle clamping
■ May be applied on both sides
■ Cut them to size
Pressure cap strips SKS (2 pcs./bag)
Suitable for
VB0003
SKS10/20TG10 to TG20 / GZ10 to GZ20 /
GM16Z to GM20Z6,55
SKS20/40TG20 to TG40 / TGK / GZ20 to GZ60 /
GM20Z to GM60Z6,75
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
29/168
All-steel screw clamps
29
■ Clamping force up to 5,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel forresilient clamping
■ Ergonomically shaped wood handle
All-steel screw clamp classiX GS
with tried-and-tested wooden handle
mm mm mm kg qty. VB0002
GS10 100 50 11.5 x 5.6 0.20 10 11,50
GS12 120 60 13.5 x 6.5 0.30 10 14,40
GS16 160 80 16 x 7.5 0.48 10 17,30
GS20 200 100 19.5 x 9.5 0.83 10 23,40
GS25 250 120 22 x 10.5 1.30 10 28,20
GS30 300 140 25 x 12 1.85 10 35,40
GS40 400 120 25 x 12 1.95 10 40,90
GS50 500 120 25 x 12 2.20 5 44,00
GS60 600 120 25 x 12 2.40 5 46,40
GS80 800 120 27 x 13 3.20 5 56,00
GS100 1000 120 27 x 13 3.65 5 63,00
■ Clamping force up to 5,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ Tommy bar with rounded ends for
simple transfer of force when clamping
All-steel screw clamp classiX GS
with tommy bar
Comparison of the first and second line on Original BESSEY all-steel screw clamps
mm mm mm kg qty. VB0002
GS16K 160 80 16 x 7.5 0.46 10 18,30
GS20K 200 100 19.5 x 9.5 0.83 10 24,70
GS25K 250 120 22 x 10.5 1.20 10 29,80
GS30K 300 140 25 x 12 1.79 10 37,20
GS40K 400 120 25 x 12 1.95 10 42,70
GS50K 500 120 25 x 12 2.17 5 45,80
GS60K 600 120 25 x 12 2.37 5 48,20
GS80K 800 120 27 x 13 3.11 5 57,80
GS100K 1000 120 27 x 13 3.58 5 64,80
Original BESSEY all-steel screw clamps classiX
Order no. GZ...2K GZ... GZ...K GS GS...K
Product range +++ +++ +++ ++ ++
Clamping width 100-1,250 mm 100-1,250 mm 160-1,250 mm 100-1,000 mm 160-1,000 mm
Throat depth 60-140 mm 60-140 mm 80-140 mm 50-140 mm 80-140 mm
Optimised rail profile
Clamping force+++ +++ +++ ++ ++
6,000 N 6,000 N 6,000 N 5,000 N 5,000 N
Changeable pressure plate
Intellectual property rights on rail, sliding arm, pressure plate and appearance
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
30/168
30
All-steel screw clamps
It has a reserve of power,
with the patented OMEGA bend
Your benefits at a glance:
1 Innovative OMEGA bend
The patented OMEGA bend gives you
added safety. It means you lose even
less clamping pressure, even when
vibrations are present.
2 Versatility
Fixed arm and pressure plate are pro-
duced and tempered from a single
piece of high quality BESSEY steel.
Clamping is resilient and strong.
3 Close flat clamping
The OMEGA bend allows you to placethe clamp absolutely flat to the surface
of the workpiece. This allows clamping
right into the corners.
4 Pressure plate
For enhanced serviceability the
pressure plate can be changed with
no need for tools. It can be replaced
very easily and quickly.‘
The load-displacement diagram shows:
the OMEGA screw clamp maintains the clamping
force significantly longer under vibration.
Malleable cast iron
screw clamp TG
All-steel
screw clampGZ
OMEGA
screw clamp GMZ
Spindle height reduction [mm]
C l a m p i n g f o r c e [ N ]
Greater safety with the OMEGA-bend
The unique, patented OMEGA-bend increases the
spring deflection of the OMEGA-screw clamp. The
decrease in pressure at the point of clamping
(...per spindle rotation) is significantly lower with
the BESSEY OMEGA clamp than with a comparable
malleable cast iron or all-steel screw clamp (see
diagram). That means that, even when vibrations are
present, this clamp will maintain its clamping
pressure longer than a conventional screw, thereby
offering greater working safety. Don't settle for less!
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
31/168
All-steel screw clamps
31
■ Clamping force up to 5,000 N
■ High-quality 2-component plastic
handle■ Pressure plates can be replaced with
no need for tools
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ Universally applicable within the fields
of wood and metal processing
OMEGA screw clamp GMZ
with 2-component plastic handle
mm mm mm kg qty. VB0002
GM16Z-2K 160 80 16 x 7.5 0.57 10 23,20
GM20Z-2K 200 100 19.5 x 9.5 0.94 10 31,40
GM25Z-2K 250 120 22 x 10.5 1.35 10 37,80
GM30Z-2K 300 140 25 x 12 1.91 10 47,40
GM40Z-2K 400 120 25 x 12 2.13 10 54,60
GM50Z-2K 500 120 25 x 12 2.33 5 58,50
GM60Z-2K 600 120 25 x 12 2.55 5 61,70
■ Clamping force up to 5,000 N
■ Fixed jaw and sliding arm are
constructed of tempered steel for
resilient clamping
■ Tommy bar with rounded ends for
simple transfer of force when clamping
■ Pressure plates can be replaced by
hand – no tools required
■ Universally applicable within the fields
of wood and metal processing
OMEGA-screw clamp GMZ
with tommy bar
mm mm mm kg qty. VB0002
GM20ZK 200 100 19.5 x 9.5 0.88 10 31,40
GM25ZK 250 120 22 x 10.5 1.25 10 37,80
GM30ZK 300 140 25 x 12 1.84 10 47,40
GM40ZK 400 120 25 x 12 2.00 10 54,60
GM50ZK 500 120 25 x 12 2.22 5 58,50
GM60ZK 600 120 25 x 12 2.44 5 61,70
■ For screw clamps
■ For gentle clamping
■ May be applied on both sides
■ Cut them to size
Pressure cap strips SKS (2 pcs./bag)
Suitable for
VB0003
SKS10/20TG10 to TG20 / GZ10 to GZ20 /
GM16Z to GM20Z6,55
SKS20/40TG20 to TG40 / TGK / GZ20 to GZ60 /
GM20Z to GM60Z6,75
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
32/168
32
Lever clamps
Clamping with leverage –
speed, safety and strength
The quick, secure, powerful clamping tool
The original BESSEY lever clamps are lightweight,
easy to handle, dimensionally stable, and torsion-
resistant. And the best thing is: they can clamp and
release up to 5 x faster than conventional clamps.
This is because they use the natural force of the
lever, meaning that with just a small amount of
effort they can quickly produce large clamping
pressures. In addition, the optimised rail profile
with greater reserves of force enables a more even
application of force – especially under full utilisa-
tion of clamping range. The original BESSEY lever
clamps are particularly valuable in situations where
many clamps have to be applied in a short time,
with no risk of loosening due to vibration. Try it out!
The lever clamp GH –
allows you to clamp up
to 5 x faster than with
conventional clamps.
The SGHS lever clamp –
the heavy duty version with
a clamping force of up to
9,500 N.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
33/168
Lever clamps
33
Your benefits at a glance:
1 Secure ratchet mechanism
The ratchet mechanism ensures rapid,
controlled, vibration-free clamping.
A hardened cam at the end of the lever
ensures a long service life.
2 Extremely sturdy
The optimised profile shape, with grea-
ter reserves of force, enables a more
even application of force especially
under full utilisation of clamping range.
The fixed bracket and pressure plate
are produced and tempered from a
single piece, thus they are very torsion-resistant.
3 Forged sliding armThe sliding arm is serrated and made
from tempered, drop-forged steel.
For an extremely long service life.
4 Ergonomic clamping and release lever
The powder-coated clamping lever has
a particularly ergonomic shape. The
plastic-coated non-slip release lever
provides a secure hold as you release
the clamp.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
34/168
Lever clamps
34
■ Greater reserves of power, thanks to
optimised rail profile, for even clamping
force build-up, especially undermaximum utilisation of the clamping
range
■ Non-slip trigger release
■ Sintered steel cams – particularly hard-
wearing, low friction due to higher
surface hardness
■ Quick – up to 5 x faster than regular
clamps
■ Secure – vibration resistant
■ Strong – clamping force up to 8,500 N
Lever clamp GH
mm mm mm kg qty. VB0002
GH12 120 60 15 x 6 0.49 10 45,00
GH16 160 80 17.5 x 6.8 0.64 10 49,30
GH20 200 100 22 x 8.5 1.11 10 56,60
GH25 250 120 24.5 x 9.5 1.44 10 65,20
GH30-12 300 120 24.5 x 9.5 1.51 10 68,00
GH40-12 400 120 24.5 x 9.5 1.75 10 71,50
GH30 300 140 28 x 11 2.27 10 77,40
GH40 400 120 28 x 11 2.41 10 81,20
GH50 500 120 28 x 11 2.61 5 87,10
GH60 600 120 28 x 11 2.84 5 90,50
GH80 800 120 28 x 11 3.20 5 100,70
GH100 1000 120 28 x 11 3.59 5 107,10
■ Heavy design
■ Rapid – up to 5 x faster than con-
ventional clamps
■ Secure – vibration resistant
■ Strong – clamping force up to 9,500 N
Lever clamp SGHS, heavy duty
mm mm mm kg qty. VB0002
SG-25HS 300 140 30 x 15 3.05 5 107,10
SG-50HS 500 140 30 x 15 3.83 5 143,00
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
35/168
Lever clamps
35
■ Non-slip trigger release
■ Quick – up to 5 times faster than
regular clamps■ Secure – unaffected by vibrations
■ Strong – clamping force up to 7,500 N
Lever clamp classiX GSH
Comparison of the first and second line on BESSEY lever clamps
mm mm mm kg qty. VB0002
GSH12 120 60 13.5 x 6.5 0.49 10 36,90
GSH16 160 80 16 x 7.5 0.64 10 40,40
GSH20 200 100 19.5 x 9.5 1.11 10 46,40
GSH25 250 120 22 x 8.5 1.44 10 53,50
GSH30 300 140 25 x 12 2.27 10 63,50
GSH40 400 120 25 x 12 2.41 10 66,60
GSH50 500 120 25 x 12 2.61 5 71,40
GSH60 600 120 25 x 12 2.84 5 74,20
BESSEY lever clamps classiX
Order no. GH GSH
Product range +++ ++
Clamping width 120-1,000 mm 120-600 mm
Throat depth 60-140 mm 60-140 mm
Optimised rail profile
Clamping force+++ ++
8,500 N 7,500 N
Intellectual property rights on rail, sliding arm, pressure plate and appearance
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
36/168
36
High-performance clamps
High-performance clamping
Clamping force of up to 35,000 N
Increasingly high clamping pressures with larger
throat depths and wider openings. These are the
daily requirements of the original BESSEY high
-performance clamps. Applications include steel
fabrication, welding, shipbuilding and automotive
manufacturing as well as heavy timber construc-
tion, wood laminations and general carpentry. In
other words, wherever sturdy or heavy parts need
to be clamped securely and with high clamping
pressure. Developed on the basis of the tried-and-
tested BESSEY all-steel screw clamp, the original
BESSEY high-performance clamps fulfil all require-
ments with panache... again and again!
The high-performance
clamp STBS –
very sturdy and long-
lasting, offering exceptional
clamping pressures.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
37/168
High-performance clamps
37
Your benefits at a glance:
1 High stability
The optimised profile guarantees high
clamping force build-up in the shortest
time, while maintaining maximum
stability and safety. The fixed bracket
and pressure plate are manufactured in
a single piece, and tempered, so are
able to bear heavy loads and are
resistant to torsion.
2 Forged sliding arm
The sliding arm has a shape that
allows for more efficient transfer of
force. As a result of its more lineartransfer of force, the U-shaped sliding
arm offers maximum security with the
heaviest of loads. You can rely on that.
3 Special tilting pressure plateThe heat-resistant pressure plate is
replaceable and can be tilted up to 35°
so it can even clamp on angled or
sloping surfaces. It has an extremely
long service-life due to the oil-soaked
sintered steel insert's excellent sliding
and emergency running properties.
4 Tempered spindle
The tempered spindle is particularly
sturdy and wear-resistant. This
considerably increases its durability.
20 % more clamping force
per spindle rotation
Competitor Original BESSEY
SGM clamp
Improved rail profile means greater productivity
The innovative shape of the BESSEY rail profile and sli-
ding arm provide a number of productivity enhancing
benefits. These benefits include more clamping force
per spindle rotation and more clamping stability for
faster and safer work. Moreover, the shape of the
rail profile and sliding arm guarantees better contact
with the work surface at higher clamping forces. The
BESSEY high-performance clamp is the ideal tool for
your clamping jobs, day after day.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
38/168
High-performance clamps
38
■ Clamping force up to 8,500 N at
tightening torque of 25 Nm
■ 20 % more clamping force per spindlerotation with optimised rail profile
■ Maximum safety due to the better
linear transfer of force of the sliding
arm
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
Fitters' clamp SLM
mm mm mm kg qty. VB0002
SL20M 200 120 28 x 11 1.88 5 67,70
SL25M 250 120 28 x 11 2.00 5 69,70
SL30M 300 120 28 x 11 2.11 5 72,30
SL40M 400 120 28 x 11 2.34 5 76,50
SL50M 500 120 28 x 11 2.60 5 80,90
SL60M 600 120 28 x 11 2.82 5 85,10
■ Clamping force up to 12,000 N at
tightening torque of 40 Nm
■ 20 % more clamping force per spindle
rotation with optimised rail profile
■ Maximum safety due to the better
linear transfer of force of the sliding
arm
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
High-performance clamp SGM
mm mm mm kg qty. VB0002
SG25M 250 140 34 x 13 2.58 5 80,20
SG30M 300 140 34 x 13 3.00 5 82,00
SG40M 400 140 34 x 13 3.17 5 92,40
SG50M 500 140 34 x 13 3.40 5 102,80
SG60M 600 140 34 x 13 3.80 5 108,20
SG80M 800 140 34 x 13 4.45 5 118,60
SG100M 1000 140 34 x 13 4.95 5 133,30SG125M 1250 140 34 x 13 5.87 1 154,50
SG150M 1500 140 34 x 13 6.65 1 171,90
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
39/168
High-performance clamps
39
■ Clamping force up to 8,500 N attightening torque of 40 Nm
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
■ Opening 200 mm
High-performance clamp SGTM, large throat depth
mm mm mm kg qty. VB0002
SG30T20M 300 200 30 x 15 3.50 1 94,20
SG60T20M 600 200 30 x 15 4.30 1 123,50
■ Clamping force up to 22,000 N at
tightening torque of 70 Nm
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
■ With 19 mm hexagonal bolt on the end
of the spindle
High-performance clamp STBM, heavy duty
mm mm mm kg qty. VB0002
STB30M 300 175 40 x 20 5.61 1 153,80
STB40M 400 175 40 x 20 6.10 1 161,90
STB50M 500 175 40 x 20 6.67 1 168,70
STB60M 600 175 40 x 20 7.23 1 174,70
STB80M 800 175 40 x 20 8.35 1 186,20
STB100M 1000 175 40 x 20 9.42 1 201,30
STB125M 1250 175 40 x 20 10.77 1 246,20
STB150M 1500 175 40 x 20 12.20 1 272,10
■ Clamping force up to 35,000 N at
tightening torque of 100 Nm■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
■ With 36 mm hexagonal bolt on the end
of the spindle
■ With wedge for fixing the sliding arm
High-performance clamp STBS, extremely heavy duty
mm mm mm kg qty. VB0002
STBS30 300 200 50 x 25 10.46 1 327,00
STBS50 500 200 50 x 25 12.17 1 355,10
STBS100 1000 200 50 x 25 17.30 1 419,00
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
40/168
High-performance clamps
40
■ Clamping force up to 35,000 N at
tightening torque of 105 Nm
■ Long life due to heat-resistant pressureplate with sintered steel insert, which
can be tilted up to 35°
■ With 19 mm hexagonal bolt on the end
of the spindle
■ With wedge for fixing the sliding arm
High-performance clamp STBVC, extremely heavy duty
mm mm mm kg qty. VB0002
STBVC15 150 100 40 x 20 4.06 1 134,70
STBVC25 250 100 40 x 20 4.62 1 147,70
STBVC35 350 100 40 x 20 5.13 1 164,90
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
Three design versions:
■ Smooth faced (standard version)
■ Rough faced for secure clamping on
dirty surfaces
■ V-groove face for round, oval and edged
workpieces
Special pressure plate
Description Suitable for
VB0003
3100736 Standard
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV,
GSV, SPZ80K
18,50
3100737 Standard STBS 27,80
3101192 Serrated
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV,
GSV, SPZ80K
20,70
3101193 V-grooved
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV,
GSV, SPZ80K
20,70
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
41/168
High-performance clamps
41
■ Clamping force up to 7,500 N with a
tightening torque of 25 Nm
■ Special heat-resistant pressure plate,can be tilted by up to 35°
Fitters' clamp classiX GSL
mm mm mm kg qty. VB0002
GSL30 300 120 27 x 13 2.11 5 59,30
GSL60 600 120 27 x 13 2.82 5 69,80
■ Clamping force up to 11,000 N with a
tightening torque of 40 Nm
■ Special heat-resistant pressure plate,
can be tilted by up to 35°
High-performance clamp classiX GSM
Comparison of the first and second line on BESSEY high-performance clamps
mm mm mm kg qty. VB0002
GSM25 250 140 30 x 15 2.58 5 65,80
GSM30 300 140 30 x 15 3.00 5 67,20
GSM40 400 140 30 x 15 3.17 5 75,80
GSM50 500 140 30 x 15 3.40 5 84,30
GSM60 600 140 30 x 15 3.80 5 88,70
BESSEY high-performance clamps classiX
Order no. SLM SGM GSL GSM
Product range +++ +++ + +
Clamping width 200-600 mm 250-1,500 mm 300-600 mm 250-600 mm
Throat depth 120 mm 140 mm 120 mm 140 mm
Optimised rail profile
Clamping force
+++ +++++ ++ ++++
8,500 N 12,000 N 7,500 N 11,000 N
Special pressure plate with sintered steel insert
Intellectual property rights on rail, sliding arm, pressure plate and appearance
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
42/168
42
KombiKlamp
Multi-purpose clamping
The clamp that adjusts itself
The KombiKlamp is a very special clamp. Alongside
the properties of a traditional all-steel screw clamp,
it has a special clamping attachment. This so-called
Vario clamping attachment offers a perfect fit for
workpieces at angles of 60° internal to 60° external.
This makes it possible to clamp round, oval and
angular workpieces both simply and securely.
Spreading with the KombiKlamp is also problem
free, as both the clamping attachment and the
sliding arm can be quickly swapped. Now you have
seen the possibilities contained within this clamp,
why not try it for yourself!
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
43/168
KombiKlamp
43
Your benefits at a glance:
1 Multi-angle pad
The multi-angle pad is especially adapted
to round, oval and angled workpieces –
from 60° inside to 60° outside. For
perfectly flat clamping remove the multi-
angle pad. For spreading it is easy to
reverse the position of the pad on the
anvil of the clamp. Its like having 3
clamps in one.
2 Removable end stop
The end stop can be removed – to allow
the sliding arm to be quickly turned
around for spreading.3 Pressure plate
For enhanced serviceability the pressure
plate can be changed with no need for
tools. It can be replaced very easily and
quickly.
4 Tommy bar with BESSEY grip
The addition of the plastic BESSEY grip
means that clamping can also be very
comfortable. The stable tommy bar has a
plastic pad to ensure that it is easy to grip
with your hand. This allows powerful,
controlled clamping.
■ Clamping force up to 7,500 N
■ Clamping and spreading of round, oval
and angled workpieces
■ Pressure plates can be replaced with
no need for tools
KombiKlamp SG-VAD
mm mm mm kg qty. VB0002
SG30VAD 300 120 30 x 15 2.95 6 85,00
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
44/168
44
U-clamps
Step-over clamping
No spacers or extension pieces necessary
The original BESSEY U-clamps have been developed
on the basis of the tried-and-tested all-steel, lever
and high-performance clamps. The characteristic
U-shaped fixed arms swiftly reaches over obstruc-
tions so find its objective like an extra hand. No
spacers or extensions are needed with the high
stepping U-clamp.
The SGU high-performance
clamp –
with U-shaped fixed arm for
step-over clamping with no
need for spacers.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
45/168
U-clamps
45
Your benefits at a glance:
1 Extremely sturdy
The U-shaped fixed arm is produced
and tempered from a single piece, thus
very torsion-resistant. This guarantees
you maximum tensile strength and
sturdiness.
2 Special tilting pressure plate
The heat-resistant pressure plate
(SGU/STBU) is replaceable and can
be tilted up to 35° so it can even clamp
on angled or sloping surfaces. It has an
extremely long service-life due to the
oil-soaked sintered steel insert'sexcellent sliding and emergency
running properties.
3 Forged sliding arm
The sliding arm is made from forgedtempered steel, and can withstand
extremely large loads. You can be sure
of that.
4 Tempered spindle
The tempered spindle is particularly
sturdy and wear-resistant. This
considerably increases its durability.
5 Sturdy tommy bar
The sturdy tommy bar has special
rounded hand-friendly ends, as well as
a hexagonal bolt. This allows powerful,
controlled clamping.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
46/168
U-clamps
46
■ Clamping force up to 4,000 N
■ Double-sided step-over clamping,
specially suited for T-profiles anddouble T-profiles
■ Low weight
■ Tempered stainless steel and fixed
bracket for resilient and elastic
clamping
U-shaped all-steel screw clamp GUZ
mm mm mm mm mm kg qty. VB0002
GU25-12-6ZK 250 120 60 60 22 x 10.5 1.46 10 52,60
■ Clamping force up to 12,000 N at
tightening torque of 40 Nm
■ Double-sided step-over clamping,
specially suited for T-profiles and
double T-profiles
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
U-shaped high-performance clamp SGU
mm mm mm mm mm kg qty. VB0002
SGU30-14-10 300 140 100 130 30 x 15 3.75 5 110,30
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
47/168
U-clamps
47
■ Clamping force up to 22,000 N attightening torque of 80 Nm
■ Double-sided step-over clamping,
specially suited for T-profiles and
double T-profiles
■ With 19 mm hexagonal bolt on the end
of the spindle
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
U-shaped high-performance clamp STBU, heavy duty
mm mm mm mm mm kg qty. VB0002
STBU40-17-15 500 175 150 110 40 x 20 7.96 1 226,00
■ Long life due to heat-resistant pressure
plate with sintered steel insert, which
can be tilted up to 35°
Three design versions:
■ Smooth faced (standard version)
■ Rough faced for secure clamping on
dirty surfaces
■ V-groove face for round, oval and edged
workpieces
Special pressure plate
Description Suitable for
VB0003
3100736 Standard
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV, GSV,
SPZ80K
18,50
3101192 Serrated
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV, GSV,
SPZ80K
20,70
3101193 V-grooved
SLM, SGM, SGTM, STBM,
STBVC, SGU, STBU, SLV, GSV,
SPZ80K
20,70
■ Clamping force up to 3,800 N
■ Step-over clamping, specially suited for
T profiles
■ Low weight
■
Quick – up to 5 x faster than regularclamps
U-shaped lever clamp GUH
mm mm mm mm mm kg qty. VB0002
GU25-12-6H 250 120 60 10 22 x 10.5 1.67 5 70,50
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
48/168
48
Claw clamps
Clamping and spreading in confined spaces
Ideal for particularly challenging tasks
The original BESSEY claw clamp lets you clamp and
spread in even the most confined spaces. It can be
used in narrow openings as well as for short
projections. This is thanks to the clamp's unique
clamping and spreading mechanism, which is
located behind the rail. The original BESSEY claw
clamp also boasts a very robust construction. This
makes it the perfect tool for particularly challenging
tasks, such as welding and assembly work.
The claw clamp GRA –
specially developed for
welding and assembly work
in poorly accessible places.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
49/168
Claw clamps
49
Your benefits at a glance:
1 Extremely sturdy
Fixed bracket and pressure plate are
produced and tempered from a single
piece, thus very torsion-resistant. This
guarantees you maximum tensile strength
and sturdiness. Increased throat depth
without compromising clamping force.
2 External handle
The handle is located behind the clamp's
rail. This is specially conceived to allow
the clamping and spreading of work-
pieces which are not easily accessible.
3 Special V-grooved pressure plateThis sturdy pressure plate is made from
high-grade cast iron, and can be tilted by
up to 30°. The prism is ideal for clamping
and spreading round or angular work-
pieces.
4 Removable end stop
The end stop can be removed – to allow
the sliding arm to be quickly turned
around for spreading.
1
3
2
4
■ Clamping and spreading force up to
7,500 N
■ Externally-positioned spindle,
protected from welding spatter
■ Clear access to work area
Claw clamp GRA
mm mm mm kg qty. VB0002
GRA30-12 300 120 28 x 11 2.44 5 99,60
GRA60-12 600 120 28 x 11 3.06 5 113,20
GRA100-12 1000 120 28 x 11 3.83 5 134,50
■ Spreading from the inside outwards
■ Flat jaw face
■ V-groove for clamping round and ovalworkpieces
Pressure piece GRD (2 pcs./bag)
kg qty. VB0002
GRD 0.66 1 17,10
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
50/168
50
Variable screw clamps
New flexibility with large clamping widths
A modular concept for the widest
range of applications
Alongside complete assembled high-perfor-
mance clamping sets BESSEY also offers versatile
accessories that can be combined with one another.
Amongst these are two different rail models: One
with a 27 x 13 mm profile in three different lengths,
and another with a 30 x 15 mm profile for work with
high clamping forces and clamping widths up to
three metres. All rails have end fastenings on both
sides that can be loosened without tools. Sliding
arms that are already fitted can be changed over
from clamping to spreading or replaced by different
sliding arms or even supplemented with others.
Sliding arms with wooden grips, lever handles or
tommy bars are available. The flexibility that this
clamping system offers ensures that numerous
applications can be handled by the combinations of
rails and sliding arms available. There are no limits
set with this individual tailoring.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
51/168
Variable screw clamps
51
Your benefits at a glance:
1 End fastenings can be loosened
without tools
The end fastenings on both sides canbe loosened without tools enabling
rapid changeover of the sliding arms
for spreading tasks. It is also possible
to replace the sliding arms or to add
additional sliding arms easily.
2 Interchangeable sliding arms
The sliding arm is made from forged
tempered steel and guarantees the
highest level of safety through the
linear transfer of forces and can
withstand extremely large loads. These
can be replaced by other sliding arm
variants to suit the application and
can also be supplemented by others.
3 Special tilting pressure plate
Both the SLV and the GSV have a
special heat-resistant pressure plate.
This is replaceable and can be tilted
up to 35°. Furthermore, the specialpressure plates used with the GSV
have a hardened and oil-soaked
sintered steel insert. This guarantees
outstanding sliding and emergency
running properties, thereby ensuring
an extremely long service life.
4 Tempered spindle
The tempered spindle is particularly
sturdy and wear-resistant. This
considerably increases its durability.
-
8/18/2019 BESSEY Complete Catalogue 2016/2017
52/168
Variable screw clamps
52
■ Clamping force up to 6,500 N
■ Tipping is prevented through central
positioning on the workpiece■ Special heat-resistant pressure plate,
can be tilted by up to 35°
■ Clamp can be fed through an opening in
the workpiece/component
Variable high-performance clamps – Complete set SLV
Wide range of possible applications due to interchangeable sliding arm
available in various different designs (see accessories)
mm mm mm mm kg qty. VB0002
SLV100M 1000 120 340-1250 27 x 13 4.78 1 102,40
SLV150M 1500 120 340-1750 27 x 13 5.97 1 123,90
SLV200M 2000 120 340-2250 27 x 13 7.15 1 145,50
■ Clamping force up to 9,000 N
■ Tipping is prevented through central
positioning on the workpiece
■ Long service life thanks to special heat-
resistant pressure plate with sintered