bhs d_flute
DESCRIPTION
Specs of D FluteTRANSCRIPT
BHS – D - Profile BHS – D - Profile
"We form your success"
4141stst CONFERENCE of CONFERENCE of BOX MANUFACTURERS BOX MANUFACTURERS
of INDIAof INDIA MUMBAI 2012
What is D fluteWhat is D flute
A new profile designed for specific applications Where does it fit in the scheme of profiles What are the advantages Where is it currently used
Corrugating Roll ProfilesCorrugating Roll Profiles
Type Height PitchK 6.0 11.7A 4.6 8.9C 3.5 8.0B 2.5 6.5D 1,8 - 2,1 3,8-5,8E 1.2 3.2F 0.8 2.4G 0.5 1.8
K - Special applications A – Reducing, Asia and America C & B – High volume,
(lighter paper & lower take up factors)
D Flute - New market taking conventional ‘B’ sales
E – Growth, single & double F, G & O – Developing markets
D fluteD flute
Flute height; 1.8---2.1 mm Pitch ; 3.8—5.8 mm
Info chartInfo chart
Profile B D
Flute Ht mm 2.48 1.7
Pitch mm 6.48 4.85
T.U.F. 1.31 1.256
Paper Saving 0 -4.1
ECT % 100 99.6
BCT % 100 88.5
FCT % 100 126.3
Lower height against ‘B’ means more board to be delivered on a pallet and saving transport costs.
Good run ability like ‘B’, not difficult to run like ‘E’ or micro flutes. No additional training necessary.
Advantages D-ProfileAdvantages D-Profile
ADVANTAGESADVANTAGES Much better printing surface because the
flutes are closer together and the surface is flatter; so excellent for packages at the Point of Sale.
Better FCT gives better visual to print on shelf, does not compress under load from goods. (Cans bottles etc).
Flute paper save compared with the Group ‘B’ cost savings.
What are the important parametersWhat are the important parameters
FLUTE HEIGHT PITCH TIP RADII VALLEY RADII T-V DIFFERENCE WEB TENSION HERTIAN FORCE
ProfileProfile
PITCH
TIP RADII
VALLEY RADII
FLUTE HEIGHTFLUTE HEIGHT
It influences the ; The BCT and FCT RESULTS T.U.R.
FLUTE HEIGHTFLUTE HEIGHT
WHAT FLUTES DO WE WHAT FLUTES DO WE NORMALLY PRODUCE ?NORMALLY PRODUCE ?
A Flute height 4.2-4.8mm
C Flute height 3.2-3.8mm
B Flute height 2.2-2.8mm
D Flute height 1.7-2.1mm
E Flute height 1.1-1.6mm
F Flute height 0.65-0.75mm
Flute Pitch Height
K 11.7 6.0A 8.9 4.6C 7.95 3.5B 6.5 2.5D 4.8 1.9E 3.2 1.22F 2.4 0.75G 1.8 0.50O 1.2 0.30
Corrugating Roll Profiles Corrugating Roll Profiles
PITCHPITCH
The pitch can vary depending on the diameter of the rolls, type of profile, customer demand, Country standards.
The pitch is one of the major influences to take up factor TUR
PapPaper Traveler Travel
CConvenonventtionionalal Flank Flank
Conventional Profilestraight flanks
Radial Flank Designspecial flank design
Flank ReliefFlank Relief