Bibliografa

Anderson88 R.C. Anderson, Inspection of Metals: Destructive Testing, ASM

International, 1988, pp 83119

Assar81 A. Assar, N. El-Mahllawy, M.A. Taha, Fluidity of stir-cast Al10% Cu

alloy, Aluminum 57 (12) (1981), pp 807810.

Azzi02 L. Azzi, F. Ajersch, Development of aluminum-base alloys for forming

in semi solid state, in: TransAl Conference, Lyon, France, 2002, pp. 23

33.

Chai92 G. Chai, T. Roland, L. Arnberg, L. Backerud, Studies of dendrite

coherency in solidifying aluminum alloy melts by rheological

measurements, in: 2nd International Conference of Semisolid Material

Processing, 1992, pp. 193201.

Choudhury02 P. Choudhury, S. Das, B.K. Datta, J. Mater. Sci. 37 (2002), pp 2103

2107.

Durman91

M. Durman, S. Murphy. Precipitation of Metastable -Phase in a

Hypereutectic Zinc-Aluminum Alloy Containing Copper, Acta Metall. et

Materialia, 1991, Vol.39 (10), pp 2235-2242.

EJB10

E. Jareo B. Estudio del efecto del Cu, del Al y de la velocidad. de

enfriamiento en la secuencia de enfriamiento de aleaciones Zn-Al-Cu.

Tesis Doctoral, Cinvestav 2010.

EDBJ14

E.D Jareo Betancourt, Efecto de la permanencia a la temperatura de

sobrecalentamiento en una aleacin Zn4Al4.5Cu, artculo 2014.

Fan02 Z. Fan, Semisolid metal processing, Int. Mater. Rev. 47 (2) (2002) 49

85.

Flemings91 M.C. Flemings, Behavior of metal alloys in the semi-solid state, Metal.

Trans. A 22A (May) (1991), pp 952981.

Gervais80 E. Gervais, H. Levert, M. Bess, Trans. AFS 68 (1980), pp 183194.

Goodwin00 J.W. Goodwin, R.W. Hughes, Rheology for Chemists and Introduction,

Royal Society of Chemistry Publication, UK, 2000.

Hanna93

M.D. Hanna. ACuZinc: Improved Zinc Alloys for Die Casting

Applications. International Congress and Exposition, March 1993.

Detroit, MI, USA.

Hanna97

M.D. Hanna, M.S.Rashid. High Strength, High temperature and High

Strains Applications of a Zinc based alloys. 1997. US Patent No.5, pp

603-552.

Han92 P. Han, Ed., Tensile Testing, ASM International, 1992, p 28.

Hash06 Hashemi, S. Foundations of materials science and engineering, 2006, 4th

edition, McGraw-Hill, ISBN 007-125690-3.

Jareo10 Jareo E.D. The effects of Cu and cooling rate on the fraction and

distribution of epsilon phase in Zn4Al(35.6)Cu alloys. J. Alloys and

Comp. 490 (2010), pp. 524-530

Kirkwood94 D.H. Kirkwood, Semisolid metal processing, Int. Mater. Rev. 39 (5)

(1994), pp 173189.

Li99

B.J. Li, C.G. Chao. Phase Transformation of Zn-4Al-3Cu Alloy during

Heat Treatment. Metallurgical and Materials Transaction A, 1999, 30, pp

917-923.

MA00

D. Ma, Y. Li, S. C. NG, H. Jones. Unidirectional Solidification of Zinc

rich Zn-Cu peritectic alloys-I Microstructure Selection, Acta Mater.,

2000, 48, pp 1741-1751.

Mehrabian72 R. Mehrabian, M.C. Flemings, Die castings of partially solidified alloys,

AFS Trans. 80 (1972), pp 173182.

MH9 Metal Handbook, ASM, Vol. 09 - Metallography And Microstructures

(1985), pp 32-33.

Murphy80 S. Murphy, Solid-Phase Reactions in the Low Cooper Part of the Al-Cu-

Zn System. Zeitschrift fuer Metallkunde, 1980, 71, pp 96-102.

Nafisi04 S. Nafisi, O. Lashkari, R. Ghomashchi, A. Charette, Effect of Different

Fraction Solids on the Fluidity of Rheocast 356 AlSi Alloy, Multi Phase

Phenomena and CFD Modeling and Solidification in Materials

Processes, TMS Publication, North Carolina, March 2004, pp. 119128.

Osorio02

W.R. Osorio, A. Garca. Modeling dendritic structure and mechanical

properties of Zn-Al alloys as a function of solidification conditions,

Mater. Sci. Eng. A325 (2002), pp 103-111.

Pandey98 J.P. Pandey, B.K. Prasad, Metall. Mater. Trans. 29A (April 1998), pp

12451255.

Poirier94 D.R. Poirier, G.H. Geiger, Transport Phenomena in Materials

Processing, TMS Publication, 1994.

Prasad97 B.K. Prasad, A.K. Patwardhan, A.H. Yegneswaran, Z. Metallkd.88 (4)

(1997), pp 333338.

Rashid91 M. S. Rashid, M.D. Hanna. Creep-Resistant Die Cast Zinc Alloys. 1991.

US Patent No. 4, pp 990-310.

Rollez03 D. Rollez, M. Pilles, N. Erhard, Ultra Thing Wall Zinc Die Casting, Die

Casting Engineer, Marzo 2003, pp 32-35

Santish96 J. Sathish, S.V. Sambasivam, S. Seshan, Indian Foundry J, (Aug, 1996),

pp 2730.

Shield55 R.T. Shield, On the Plastic Flow of Metals under Conditions of Axial

Symmetry, Proc. R. Soc., Vol. A233, 1955, p 267

Sury02 M. Suery, Mise en Forme des alliages metalliques a letat semi solide,

LAVOISIER Publication, France, 2002

Trk03

Trk, M. Durman, E.S. Kayali, The effect of Cu and Al on the

mechanical properties of gravity-cast hyper-eutectic Zn-Al-based alloys,

Z. Metallkd. 94 (9) (2003), pp 1001-1005.

Taylor42 W.J. Taylor, The Hardness Test as a Means of Estimating the Tensile

Strength of Metals, J.R. Aeronaut. Soc., Vol. 46 (No. 380), 1942, pp

198202

Uetani01 Y. Uetani, H. Takagi, K. Matsuda, S. Ikeno, Semi-continuous casting of

mechanically stirred A2014 and A390 aluminum alloy billets, in: M.

Sahoo, T.J. Lewis (Eds.), Light Metals Conference, COM, Toronto,

2001, pp. 509520.

Voort99 George Vander Voort, Metallography: Principles and Practices, ASM

International, 1999, pp 383385 and 391393

WAP79 Treatise on Material Science, vol. 13, Wear Academic Press, New York,

NY, 1979, pp 363442.

Wazer66 V. Wazer, L.K. Colwell, Viscosity and Flow Measurement, J.W.

Publication, 1966.

Winter03 R. Winter, Melting and Handling of Zinc Alloys, Die Casting Engineer,

Marzo 2003.