biometric fingerprint based bank locker application system

Upload: mamatha-marri

Post on 04-Apr-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/30/2019 Biometric Fingerprint Based Bank Locker Application System

    1/3

    BIOMETRIC FINGERPRINT BASED BANK LOCKER

    APPLICATION SYSTEM

    ABSTRACT

    AIM:

    The main objective of this project is to develop an embedded system based access control for

    bank locker by using fingerprints as authentication.

    IMPLEMENTATION:

    This project is implemented on an 8051 based At89s52 developed board interfaced with

    fingerprint scanner, Relay, and LCD for display purpose.

    BLOCK DIAGRAM:

    MICROCONTROLLER

    AT89S52

    LCD 162

    FPRS

    SCANNER

    MAX

    232

    Accessindication

    LED

    RPS

    CRYSTAL

    RELAY

  • 7/30/2019 Biometric Fingerprint Based Bank Locker Application System

    2/3

    POWER SUPPLY:

    DESCRIPTION:

    Working principle of our project is we will store all the peoples finger prints in the

    reader which is having the capability to store 1000 finger prints. The persons who will come and

    put their fingers on to the reader will be given access if that persons finger print is already

    recorded, will be rejected if not stored.

    Whenever the user enters into bank and wants to open his locker he puts his finger on to

    the reader where we kept our embedded board attached with the reader. Whenever the persons

    finger is valid then our embedded systems board will be automatically gives the permission to

    that person to open the locker if the persons finger print is not there at our readers memory no

    way the access will be given. Even to close the locker also he should has to keep his finger onto

    the reader and close the lock.

    The system can work standalone and can also be integrated to a computer using RS-232

    port. The complete code for the embedded system is going to be developed using embedded C-

    Language.

    SOFTWARE:

    Embedded C

    Step Down

    Transformer

    Bridge

    Rectifier

    Filter

    Circuit

    Regulator

    section

  • 7/30/2019 Biometric Fingerprint Based Bank Locker Application System

    3/3

    RIDE to write code

    ISP to burn the chip

    HARDWARE:

    At89s52 based our own developed board

    Power Supply

    Finger Print module

    RELAY

    LCD

    ADVANTAGES:Low cost, automated operation, Low Power consumption.

    REFERENCES

    1. The 8051 micro controller and embedded systems by Mazidi.2. www.wikipedia.org3. www.atmel.com4. www.8051projects.com5. Embedded systems with 8051 by kenith j ayala

    http://www.atmel.com/http://www.atmel.com/http://www.8051projects.com/http://www.8051projects.com/http://www.8051projects.com/http://www.atmel.com/