bison-bial® workholding and rotary tooling - logan actuator co
TRANSCRIPT
Table of ContentsTA
BLE
OF
CO
NTE
NTS
TABLE OF CONTENTS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
WORKHOLDINGManual Chucks Introduction. . . . . . . . . . . . . . . . . . . . 346
Power Chucks and Cylinders Introduction . . . . . . 347
Chuck Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . 348
SET-TRU Scroll Chucks,Backplates and Spare Parts. . . . . . . . . . . . . . . . . . . . . 358
Precision Scroll Chucks,Backplates and Spare Parts. . . . . . . . . . . . . . . . . . . . . 376
Universal Scroll Chucks,Backplates and Spare Parts. . . . . . . . . . . . . . . . . . . . . 391
Large Thru-Hole Scroll Chucksand Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
Extra Large Thru-Hole Chucksand Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
Front Mounting Scroll Chucks,Backplates and Spare Parts. . . . . . . . . . . . . . . . . . . . . 413
Combination Lathe Chucks and Spare Parts . . . . 417
Independent Chucks,Backplates and Spare Parts. . . . . . . . . . . . . . . . . . . . . 419
Heavy Duty and Oil Country Chucksand Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
Power Chuck Selection Guide . . . . . . . . . . . . . . . . . . 450
Power Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
Hydraulic Cylinders for Power Chucks . . . . . . . . . . 458
Backplates for Power Chucks . . . . . . . . . . . . . . . . . . . 460
Power Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
Power Chucks Spare Parts . . . . . . . . . . . . . . . . . . . . . . 464
Pneumatic Chucks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
Indexers and Face Plates . . . . . . . . . . . . . . . . . . . . . . . 472
Rotating Chucks and Spare Parts . . . . . . . . . . . . . . . 481
Collet Chucks and Spare Parts . . . . . . . . . . . . . . . . . . 485
Mini Scroll Chucks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Quick Clamping Chucks and Spare Parts . . . . . . . . 493
Live and Dead Centers . . . . . . . . . . . . . . . . . . . . . . . . . 498
Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
ROTARY TOOLINGCAT V-Flange Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
BT Flange Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
HSK Flange Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528
NMTB Flange Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
R8 Shank Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
Morse Taper Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539
Straight Shank Tooling . . . . . . . . . . . . . . . . . . . . . . . . . 545
Collets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 552
Collet Chuck Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 564
Drill Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566
Quick Change Toolposts . . . . . . . . . . . . . . . . . . . . . . . . 567
Tooling Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568
Retention Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 570
Milling Machine Arbors . . . . . . . . . . . . . . . . . . . . . . . . 571
Tap Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575
BISON-BIAL® WORKHOLDING AND ROTARY TOOLING
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
TAB
LEO
FC
ON
TENTS
Table of Contents
Quality Products • Partnership • Industry Experts TABLE OF CONTENTS
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580
Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585
INDEX AND CROSS REFERENCE
The information contained herein is subject to change without notice. We do our best to maintain in stock full and complete inventories of allregular lines. Close-out items may be depleted and will be replaced with other merchandise subject to prior sales. Photos and drawings shown area general representation. Toolmex Corporation shall not be liable for technical or editorial errors or omissions contained herein.
Toolmex is a trademark of Toolmex CorporationBISON-BIAL is a trademark of BISON-BIAL, S.A.
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Manual ChucksM
AN
UA
LC
HU
CK
S
346 MANUAL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Manual Chucks
Toolmex delivers the best in classWorkholding Chucks; whether you choose Steel or Semi-steelManual Lathe Chucks. Our product lines of Scroll, Independent, Oil Country, Power, or Collet havebeen replacing the competition without sacrificing quality. When you purchase any chuck fromToolmex you can be confident that you are buying the best Workholding available on the marketand we have a team of experts that have been trained to deliver uncompromised service eachand every time.
Toolmex chucks are tested at the factory then again in the Toolmex QA Lab aswell as with select customers. You can always be assured you are getting the bestchucks in the world from Toolmex.
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:26 PM Page 346
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
347
POW
ERC
HU
CK
SA
ND
CY
LIND
ERS
Power Chucks and Cylinders
Quality Products • Partnership • Industry Experts POWER CHUCKS AND CYLINDERS
Power Chucks
Hydraulic Cylinders
Advanced Technological ProcessesAll Power chucks are manufacturedfrom high grade Alloy Steel and allsliding surfaces are hardened andground for consistent accuracyand performance. Ruggedness andpreciseness are built into the productfor easy maintenance. The powerchucks that we offer are designedand built with sealed faces thathelp to protect the internal partsfrom abrasion. Most of our PowerChucks come with enlarged thruholes making it suitable for shaftwork pieces including gear shaftsand axle shafts.
We have designed our Hydraulic Cylinderswith your safety in mind. The cylindershave check valves located on theexterior or the body for easy accesswhile attached to the equipment incase of a power failure. The cylinderalso has a leakage prevention systembuilt in to eliminate the possibilityof leakage on the workpiece.
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:26 PM Page 347
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Chuck Selection GuideC
HU
CK
SELE
CTI
ON
GU
IDE
348 CHUCK SELECTION GUIDE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Application of Chucks and Centers
Backplate Plates (Chuck Backplates)
Rotating Chucks,Live Centers, and
Dead Centers
Lathe Chucks
Type A Type D1 Threaded Type L Type C
Types of Spindle Nose
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:44 PM Page 348
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
349
BISO
N-B
IAL
®W
OR
KH
OLD
ING
AN
DR
OTA
RYTO
OLIN
G
Quality Products • Partnership • Industry Experts BISON-BIAL WORKHOLDING
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
BISON-BIAL® Workholding
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 349
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Chuck Selection GuideC
HU
CK
SELE
CTI
ON
GU
IDE
350 CHUCK SELECTION GUIDE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
2" 3" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" 32" 36" 40" 49"
60 mm 80 mm 100 mm 125 mm 160 mm 200 mm 250 mm 315 mm 400 mm 500 mm 630 mm 800 mm 915 mm 1000 mm 1250 mm
Manual Chuck Selection Worksheet
Type of Chuck Plain Back * Direct Mount
Self-Centering (scroll)
SET-TRU (scroll) N/A
Independent
Combination N/A
5C Collet (manual) N/A
5C Collet (power operated)
16C Collet N/A
Rotating with MT Shank
Quick Clamping N/A
Special
Type of Chuck
* See type of mounting to select proper backplate plate
Semi-Steel
Cast Steel
Forged Steel
Aluminum
Special
2-Jaw (self-centering only)
3-Jaw (self-centering only)
4-Jaw (self-centering, combination and independent)
6-Jaw (self-centering only)
Number of Chuck Jaws
Two-piece Reversible Hard Jaws (standardon 3 and 4-Jaw steel chucks and SET-TRU chucks)
Set of OD and Set of ID Hard Solid Jaws(self-centering chucks only)
Hard Solid Reversible Jaws(4-Jaw independent chucks only)
Soft Top Jaws(requires 2-piece Jaws on chuck)
Soft Solid Jaws (3-Jaw and 4-Jaw scroll chucks,combination chucks)
Special
Type of Chuck Jaws
Chuck Outside Diameter
Chuck Body Materials
Plain Back
Short Taper A1 or A2 – 4 5 6 8 11 15 20
Short Taper D1 3 4 5 6 8 11 15 –
Short Taper C (DIN) – 4 5 6 8 11 – –
Long Taper L L00 L0 L1 L2 L3 – – –
Threaded Standard 1" - 10 1-1/2" - 8 2-3/16" - 6 2-1/4" - 8 2-3/4" - 8 M39 x 4
Threaded Hardinge 2-3/16" - 10"
5C Backplates – 4" 5" 6" – – – –
MT Backplates MT3 MT4 MT5 – – – – –
Special Backplates
Maximum Gripping Force
Minimum Hole Diameter
Maximum RPM
MaximumWeight of Workpiece (lbs)
Workpiece Diameter (max - min range)
Workpiece Length
Additional Workpiece Support(with or without additional support)
Chuck Working ParametersProper identification of all chuck parameters willhelp us with recommendations and options
Type of Mounting – Lathe Spindle Nose for Chucks and Backplates
To ensure selection accuracy, fax this worksheet to your Customer Service Representative at +1-508-653-5110
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 350
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
351
SPIND
LETY
PEA
ND
SIZE
Chuck Selection Guide
Quality Products • Partnership • Industry Experts CHUCK SELECTION GUIDE
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
SpindleNose F1 F2 B C
max
ThreadE1 = E2UNC-3B
A-4 3.2500 - 2.5005 + .0005 .4375 7/16-14
A-5 4.1250 2.4374 3.2505 +.0005 .5625 7/16-14
A-6 5.2500 3.2500 4.1880 + .0005 .6250 1/2-13
A-8 6.7500 4.37500 5.50075 + .0005 .6875 5/8-11
A-11 9.2500 6.5000 7.75075 + .0005 .7500 3/4-10
A-15 13.0000 9.7500 11.251 + .001 .8125 7/8-9
A-20 18.2500 14.5000 16.251 +.001 .8750 1-8
A-28 25.5000 20.8750 23.001 + .001 1.000 1 1/4-7
Determining the Proper Spindle Type and SizeBISON-BIAL® Chucks meet all of the requirements of ASA Standard B5.9-1960
• For spindle nose accuracy (T.I.R.) see page 353• If further assistance is desired, please contact Toolmex Customer Service at +1-800-992-4766 or +1-508-653-8897
Selecting the chuck mounting:
• Choose from the types shown below• For short taper spindle nose, Type A, D, or C (DIN),measure the pilot diameter and length (dimensionsB and C), bolt circle diameter (dimensions F1 and F2)and diameter of the holes (dimensions E1 and E2)
• In the case of A type mount, check the numberof bolt circles (one for A2 mount or two for A1 mount)
• All chucks with A1 mount can be installed on A1spindle nose only
Spindle Type A1 and A2
Type A1 hastapped holeson both innerand outerbolt circles
SpindleNose A F B C
max ENumber
ofHoles
CamlockStudDia
D1-3 3.622 2.7820 2.1250 + .00025 .4375 .59373
9/16
D1-4 4.606 3.2500 2.5005 + .0005 .4375 .6562 5/8
D1-5 5.748 4.1250 3.2505 + .0005 .5000 .8750
6
3/4
D1-6 7.126 5.2500 4.1880 + .0005 .5625 1.000 7/8
D1-8 8.858 6.7500 5.50075 +.0005 .6250 1.125 1
D1-11 11.732 9.2520 7.75075 +.0005 .6875 1.250 1 3/16
D1-15 15.866 13.0000 11.251 + .001 .7500 1.375 1 3/8
Camlock Spindle Type D1
• All chucks with A2 mount can be installed on eitherA1 or A2 spindle nose
• For the long taper spindle nose, Type L, check pilotdiameter, length and thread size(dimensions A, C, and B)
• For the threaded spindle nose, check the threaddiameter, number of threads per inch and length(dimensions B and D), plus overall length (dimension F1)
Type A2 doesnot have holes inthe inner bolt circle
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 351
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Chuck Selection GuideSP
IND
LETY
PEA
ND
SIZE
352 CHUCK SELECTION GUIDE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
SpindleNose A B F D E
1" - 10" UNS-2B 1.015 1.500 .4375 1.000
1 1/2"-8" UN-2B 1.515 1.500 .4375 1.000
2 3/16" - 10" UN-2B 2.2025 1.750 .5625 1.125
2 1/4" - 8" UN-2B 2.260 1.750 .5625 1.125
2 3/16" - 6" UN-2B 2.2025 1.750 .5625 1.125
2 3/4" - 8" UN-2B 2.760 2.0625 .6875 1.3125
Determining the Proper Spindle Type and Size
Long Taper Key Drive, Spindle Type L
SpindleNose
ThreadB C A Key
L00 3 3/4" - 6" 2 2.75 3/8 x 3/8 x 1 1/2
L0 4 1/2" - 6" 2 3/8 3.250 3/8 x 3/8 x 1 3/4
L1 6" - 6" 2 7/8 4.125 5/8 x 5/8 x 2 3/8
L2 7 3/4" - 5" 3 3/8 5.250 3/4 x 3/4 x 2 7/8
L3 10 3/8" - 4" 3 7/8 6.500 1 x 1 x 3 1/4
Threaded Spindle
German Standard DIN 55027, Spindle Type C
SpindleNose F B C
max E Number ofHoles
C-4 3.2500 2.5005 .4331 .83 3
C-5 4.1250 3.2505 .5118 .83 4
C-6 5.2500 4.1880 .5512 .91 4
C-8 6.7500 5.50075 .6299 1.14 4
C-11 9.2520 7.75075 .7087 1.42 6
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 352
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
353
CH
UC
KSELEC
TION
GU
IDE
Chuck Selection Guide
Quality Products • Partnership • Industry Experts CHUCK SELECTION GUIDE
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
Universal and Precision Chuck Types: 3200, 3500, 3600, and 3700
dL n p s w
solid jawsw
2 piece jawsRadial Runout Axial Runout
1 2 3 A B C
3-1/2" 0.39 – 0.55 1.57 1.57 2.36 1.38 2.48 – 0.0008 0.001 0.0006
4" 0.39 0.55 0.71 1.57 1.57 2.95 1.97 3.15 – 0.0008 0.001 0.0006
5" 0.71 0.98 1.18 2.36 1.97 3.94 2.44 3.94 4.72 0.0012 0.0014 0.0008
6-1/4" 0.71 1.18 1.57 2.36 1.97 5.31 3.46 3.94 5.9 0.0012 0.0014 0.0008
8" 1.18 1.57 2.08 3.15 3.15 6.38 3.78 6.3 7.28 0.0016 0.0018 0.001
10" 1.18 2.08 2.95 3.15 3.15 7.87 5.9 6.3 8.86 0.0016 0.0018 0.001
12-1/2" 2.08 2.95 3.94 4.72 4.92 9.92 8.27 9.84 11.81 0.002 0.0022 0.0012
15-3/4" 2.08 3.94 4.92 4.72 4.92 11.1 9.84 9.84 13.78 0.0024 0.0025 0.0012
20" 2.95 3.94 4.92 6.3 7.87 11.1 11.81 15.75 15.75 0.004 0.004 0.002
25" 2.95 4.92 6.3 6.3 7.87 12.79 15.75 15.75 15.75 0.004 0.004 0.002
31-1/2" 6.3 7.87 9.84 6.3 12.8 19.7 15.75 19.7 19.7 0.0059 0.0059 0.0024
Self-Centering Scroll Chuck Accuracy• All allowable runouts which are specified relate tomeasurements at three different jaw openings d (1, 2, and 3)
Permissible Spindle Runout
To obtain the specified clamping accuracy of achuck mounted on a machine tool, it is necessary to:
1. Reduce play in the spindle bearings to allowable minimum2. Ensure the machine spindle nose does not exceed the values specified3. Meet the basic requirements for correct mounting of the chuck on the spindle nose4. Follow the chuck manual
Chuck Dia Spindle Runout
3500 Steel Body Chucks
3" - 16" .00012" max
20" - 25" .0002" max
3200 Semi-Steel Body
3" - 6" .00012" max
8" - 32" .0002" max
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 353
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Chuck Selection GuideC
HU
CK
SELE
CTI
ON
GU
IDE
354 CHUCK SELECTION GUIDE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Dia 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25"
SolidJaws
d1 .118 - 1.299 .236 - 1.69 .315 - 2.51 .315 - 3.54 .47 - 4.65 .47 - 5.16 – – –
d2 1.259 - 2.440 1.65 - 3.07 2.05 - 4.21 2.52 - 5.71 3.23 - 7.40 3.74 - 8.46 – – –
d3 2.440 - 3.661 3.27 - 4.72 4.02 - 6.30 5.20 - 7.87 6.50 - 9.84 7.56 - 12.40 – – –
d4 1.023 - 2.204 1.34 - 2.68 1.85 - 3.94 2.17 - 5.31 2.68 - 6.85 3.23 - 7.87 – – –
d5 2.244 - 3.425 2.91 - 4.33 3.86 - 6.06 4.76 - 7.95 5.91 - 10.08 7.01 - 11.77 – – –
Two-PieceJaws
d1 – .236 - 1.69 .315 - 2.51 .315 - 3.54 .47 - 4.65 .47 - 5.16 .59 - 7.95 1.18 - 9.25 1.57 - 13.19
d2 – 1.97 - 3.43 2.64 - 4.76 2.91 - 6.14 3.23 - 7.40 4.25 - 8.90 5.20 - 11.65 4.76 - 15.83 5.20 - 21.85
d3 – 3.70 - 4.92 4.65 - 6.30 5.28 - 7.78 6.46 - 9.84 6.02 - 12.40 9.29 - 15.75 7.76 - 18.82 8.27 - 24.80
d4 – 1.30 - 2.75 1.77 - 3.82 2.05 - 5.12 2.68 - 6.85 2.68 - 7.17 2.87 - 9.92 5.31 - 16.26 5.91 - 23.03
d5 – 2.30 - 4.68 3.62 - 5.75 4.29 - 7.48 5.91 - 10.08 5.91 - 10.08 6.65 - 13.86 8.27 - 19.25 8.66 - 26.02
Clamping Ranges for 6-Jaw Chucks (SET-TRU)
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 354
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
355
CH
UC
KSELEC
TION
GU
IDE
Chuck Selection Guide
Quality Products • Partnership • Industry Experts CHUCK SELECTION GUIDE
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Clamping Ranges for 3 and 4-Jaw Self-Centering Scroll Chucks
Solid Jaws Two-piece Reversible Jaws
Jaw for Heavy Machining Jaws for Special Applications Jaws for Finishing
Chuck Dia 2-1/3" 3-1/4" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" 31-1/2"
SolidJaws
d1 .02-.95 .08-1.06 .118 - 1.30 .118 - 1.97 .118 - 2.52 .157 - 3.54 .197 - 4.65 .394 - 5.16 .39-7.09 .79-9.25 1.18-13.19 5.9-18.98
d2 .79-1.65 .87-1.81 1.26 - 2.44 1.54 - 3.27 1.97 - 4.21 2.36 - 5.71 3.03 - 7.40 3.54 - 8.46 3.35-9.92 4.72-13.19 6.30-18.31 11.10-24.17
d3 1.46-2.36 1.77-2.72 2.44 - 3.27 3.15 - 4.92 3.86 - 6.30 5.12 - 7.87 6.30 - 9.84 7.48 - 12.40 8.27-14.96 9.65-18.74 12.80-24.80 17.64-30.71
d4 .79-1.65 .98-1.97 .98 - 2.20 1.34 - 2.91 1.65 - 3.94 2.05 - 5.31 2.44 - 6.85 3.07 - 7.87 4.05-10.71 5.51-14.06 7.09-19.17 11.89-24.96
d5 1.50-2.36 1.89-2.80 2.20 - 3.43 2.83 - 4.53 3.70 - 6.06 4.72 - 7.95 5.71 - 10.08 6.77 - 11.77 9.05-15.75 10.87-19.69 13.58-24.80 18.43-31.50
Two-PieceJaws
d1 – – – .118 - 1.97 .118 - 2.52 .157 - 3.54 .197 - 4.65 .394 - 5.16 .394 - 7.09 .787 - 9.25 1.18 - 13.19 5.9-18.98
d2 – – – 2.05 - 3.78 2.44 - 4.76 2.83 - 6.14 3.39 - 7.76 4.06 - 8.90 5.00 - 11.57 4.33 - 15.75 4.72 - 22.44 9.92-28.99
d3 – – – 3.74 - 4.92 4.53 - 6.30 5.24 - 7.87 6.30 - 9.84 7.48 - 12.40 9.06 -15.75 7.48 - 19.69 7.87 - 24.80 12.91-31.97
d4 – – – 1.34 - 2.99 1.65 - 3.81 1.97 - 5.12 2.28 - 6.50 2.56 - 7.17 2.84 - 8.98 4.72 - 16.14 5.51 - 23.23 9.45-28.5
d5 – – – 2.95 - 4.65 3.46 - 5.75 4.13 - 7.48 4.92 - 9.25 5.71 - 10.43 6.50 - 12.95 7.87 - 19.09 8.27 - 26.18 12.44-31.50
To Avoid a Chuck Gripping Problem, Select the ProperHard Top Jaws or Soft Top Jaws
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 355
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Chuck Selection GuideC
HU
CK
SELE
CTI
ON
GU
IDE
356 CHUCK SELECTION GUIDE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Diameter 3-1/4" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" 31-1/2"
l 1.2 × d 1.5 × d 1 × d
z 4 × h
Chuck Diameter 3-1/4" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" 31-1/2"
Steel and Semi-Steel Chucks 2,200 3,750 5,300 6,800 8,200 10,000 12,000 14,300 16,000 17,700 19,800
Max Pinion Torque Nm 35 50 75 120 160 180 200 280 360 460 500
Chuck Diameter 3-1/4" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" 31-1/2"
Universal Chucks (Semi-Steel body) 4000 3500 3200 3000 2500 2000 1500 1000 700 500 300
Precision Chucks (Steel body) 6000 5200 4800 4500 4000 3500 2800 2000 1200 1000 450
Chuck Diameter 3-1/4" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25"
Unbalancing (ounce-inch) 0.15 0.22 0.32 0.44 0.62 0.87 1.25 1.94 4.16 8.88
Safe Operating Parameters
Conditions:
• l and z = maximum length of workpiece• d = workpiece diameter• h = height of the clamping jaw step• Workpiece is clamped into the chuck jaws without additional support
Total Gripping Force of all Self-Centering Chucks – lbs
Recommended Maximum Speeds for Self-Centering Chucks – RPM
Value of Unbalancing for Precision Self-Centering Chucks Only
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 356
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
357
CH
UC
KSELEC
TION
GU
IDE
Chuck Selection Guide
Quality Products • Partnership • Industry Experts CHUCK SELECTION GUIDE
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Lathe Chuck Safety Conditions• Due to chuck rotating speeds and cutting forces during machining, careshould be taken to ensure the proper and safe use of your BISON-BIAL chuck
• Cleaning should be done often for safety purposes as well as to providea long work life for your chuck
• Proper maintenance ensures longer life of the product
PRIOR TO OPERATING YOUR TOOLMEX LATHE CHUCK, PLEASE:
• Read the chuck manual
• Do not start the lathe until all is clear. A collision betweenthe chuck and lathe will cause damage to both
• Do not use the chuck on heavy work where the chuck jawsproject appreciably from the chuck body. Refer to the tableson page 350 to select the correct size chuck for the application
• Do not clamp long work pieces in the chuck withoutadditional support as this can cause heavy damage tothe lathe and work environment. Refer to the table onpage 356 for safety parameters
• Always remove the chuck wrench before starting the machine
• Do not remove the safety spring from the chuck wrench
• Never operate the chuck if any parts are damaged,missing, or cracked
• Do not tamper with the chuck. If an inaccuracy is found,check the spindle nose or backplate for true-runningand make sure there is no dirt or foreign matterbetween the mounting faces
• Never exceed maximum speed (RPM) of the chuck. TheMAX RPM is stamped on the chuck face. Refer to thetable on page 356 for recommended maximum speedsfor self-centering chucks
• Periodically inspect and service chucks for wear to avoidinadequate workholding conditions
• Be sure top jaws are securely bolted to the master jaws
• Never do any unauthorized chuck modifications
• Always keep your chuck clean and lubricated
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 357
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Scroll ChucksSE
T-TR
USC
RO
LLC
HU
CK
S
358 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
• SET-TRU Scroll Chucks can be used for all machining operations whereuniversal chucks are used, along with applications where universal scrollchucks require tighter tolerances
• Outstanding accuracy, versatility and long life make BISON-BIAL SET-TRUchucks invaluable in the modern workshop and indispensable in the toolroom
Features of 6-Jaw SET-TRU Chucks:
• The 6 jaws grip firmly with less pressure and less distortion per jaw• Ideal for thin wall and second operation work• Eliminates the need for spring collets
SET-TRU Chuck Features and Benefits:
• Fine adjustment• Available with Forged Steel body or Semi-Steel body• 3 pinion design• 4 micro adjustment screws provide .0004" T.I.R. repeatability• 16", 20" and 25" diameter chucks with 3 jaws and 6 jaws use 8 microadjustment screws achieving extremely high gripping concentricity
• Two piece top and master jaws are American Standard tongue and groove• 4" diameter chuck has 2 sets of solid jaws• Scrolls are forged and fully hardened with thread flanks ground on bothsides, then precisely balanced for longer life and higher accuracy
• Each scroll is precisely balanced• Jaw teeth and guides on both sides are fully hardened and ground.Hardened and ground bushings are pressed into the pinion seats.Pinions in 3 pinion models are hardened and ground
• Each chuck is balanced within fine limits (see page 356 of technicalreference pages for more information)
• Steel mounting plates are interchangeable with BISON-BIAL SET-TRU chucksof the same size so that one chuck can be used on different spindles
• The life of your chuck can be extended significantly through propermaintenance and must be cleaned on a regular basis as recommended
• For the best gripping results, use the recommended chuck grease:Part Number 7-799-025
OutstandingAccuracy and Quality
Hardenedand GroundSurfaces
Steel BackplateFront View
ChuckBack View
BISON-BIALChuck Grease7-799-025
See pages 481-482 for more information
3, 4, and 6-Jaw SET-TRU Scroll Chucks, 0.0004" T.I.R.
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 358
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
359
SET-TRU
SCR
OLL
CH
UC
KS
SET-TRU Scroll Chucks
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-5...4. Pinion 7-886-5...5. Pinion Half Ring 7-888-7...6. Pinion Sleeve 7-888-5...7. Hard Master Jaws 7-885-...8. Hard Top Jaws 7-883-...9. Grease Nipple10, 11 and 13. Back Cover Mounting Bolts12. Spindle Locating Pin - “A” Mount Only14. Spring Loaded ChuckWrench 7-889-0...15 and 16. Hard Top Jaw Mounting Bolts 7-897-5...17. Chuck Mounting Bolts 7-897-7...18 and 20. Hex Keys 6-999-5...19. Fine Adjustment Screw 7-897-6...
3, 4, and 6-Jaw SET-TRU Scroll Chucks, 0.0004" T.I.R.
ChuckDiaD
F E A1 AHole
d(max)
H2-PieceJaws
SolidJaws
Soft TopJaws** C
h
4" 3.2677 1.7717 – – 0.787 2.677 – 0.63 – 0.51
5" 4.252 2.1654 – – 1.378 2.362 1.575 0.787 – 0.59
6-1/4" 5.5118 3.3858 – – 1.654 2.677 1.71 1.26 1.697 0.67
8" 6.9291 4.3307 – – 2.165 3.071 1.77 1.142 1.776 0.71
10" 8.8188 5.7086 – – 2.992 3.504 2.05 1.339 2.071 0.79
12-1/2" 11.2598 7.0866 – – 4.055 3.819 2.24 1.693 2.24 0.79
15-3/4" 6.75 – 11.748 11.782 5.354 4.803 2.638 – – 0.87
20" 9.252 – 16.022 16.032 7.48 5.669 3.11 – – 1.18
25" 13 – 16.022 16.032 9.921 5.905 3.425 – – 1.18
Fine AdjustmentScrews N
Thread Qty
M10 x 1
4
M12 x 1*
M12 x 1
M18 x 1
8
Mounting BoltsM and T
Thread Qty
M8 x 1.25
3
M8 x 1.25
M10 x 1.5
M10 x 1.5
M12 x 1.75
M16 x 2
5/8 x 11
63/4 x 10
3/4 x 10
** For 2-jaw chucks onlySee pages 354-355 for clamping ranges
Chuck Diameters: 15-3/4", 20", and 25"Chuck Diameters: 4" thru 12-1/2"
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 359
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Scroll ChucksSE
T-TR
USC
RO
LLC
HU
CK
S
360 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Backplate and Chuck Mounting Principles for 15-3/4" through 25" Diameter Chucks
• The backplate’s outside diameter, d, is the same as the chuck’s counterbore diameter, D• The clearance range between the chuck counterbore and backplate OD is from 0.0141" to 0.0236"
Backplate and Chuck Mounting Principles for 4" through 12-1/2" Diameter Chucks
• The backplate’s outside diameter, d, is the same as the chuck’s outside diameter, D• The clearance range between the chuck counterbore and backplate boss OD is from 0.0078" to 0.0129"
3, 4, and 6-Jaw SET-TRU Scroll Chucks, 0.0004" T.I.R.
ChuckDia A B
(HB) C E T-slotLength
20" 0.9055 .5512 .2362 0.8268 4.51
25" 1.1811 .7087 .4724 1.0236 4.69
3-Jaw Chuck T-slot Dimensionsfor 20" and 25" Diameter Chucks Only
Chuck CounterboreBackplate Boss
Face of the chuck
Backplate Boss Chuck Counterbore
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 360
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
361
SET-TRU
SCR
OLL
CH
UC
KS
SET-TRU Scroll Chucks
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
• Forged Steel Body• 3 Pinion Design
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Set of fine adjustment screws• 2 Hex keys• Eye bolts for chuck sizes 15-3/4and larger
3-Jaw Scroll Chucks with Hard Solid Jaws
• Forged Steel Body• 3 Pinion Design
Each chuck is provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Set of fine adjustment screws• 1 hex key
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
5" 7-866-0500 996.78 1.378 3800 11
6-1/4" 7-866-0600 839.97 1.654 3500 21
8" 7-866-0800 988.44 2.165 3100 35
10" 7-866-1000 1,332.48 2.992 2700 59
12-1/2" 7-866-1200 1,958.85 4.055 2200 105
15-3/4" 7-866-1600 3,306.48 5.354 1800 201
20" 7-866-2000 8,272.56 7.480 1200 377
25" 7-866-2500 11,017.68 9.921 1000 630
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
4" 7-866-8040 899.43 .787 4200 7.3
5" 7-866-8050 752.97 1.378 3800 11
6-1/4" 7-866-8060 666.72 1.654 3500 21
10" 7-866-8100 1,093.17 2.992 2700 59
12-1/2" 7-866-8120 1,545.39 4.055 2200 105
Type 3565
Type 3564
Prices are subject to change without notice
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 361
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Scroll ChucksSE
T-TR
USC
RO
LLC
HU
CK
S
362 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
4 and 6-Jaw SET-TRU Scroll Chucks, 0.0004" T.I.R.with Fine Adjustment, Forged Steel Body, 2 and 3 Pinion Design
6-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Set of fine adjustment screws• 2 Hex keys• Eye bolts (16” to 25” only)
6-Jaw Scroll Chucks with Hard Solid Jaws
Each chuck is provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Set of fine adjustment screws• 1 hex key
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
5" 7-868-0500 1,080.42 1.378 3000 14
6-1/4" 7-868-0600 1,160.97 1.654 2500 25
8" 7-868-0800 1,427.61 2.165 2200 42
10" 7-868-1000 1,875.12 2.992 1900 78
12-1/2" 7-868-1200 2,598.42 4.055 1500 128
15-3/4" 7-868-1600 4,623.21 5.354 1300 250
20" 7-868-2000 9,729.99 7.480 800 397
25" 7-868-2500 14,203.20 9.921 700 647
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
4" 7-868-8040 906.90 .787 4000 9.7
5" 7-868-8050 762.33 1.378 3000 14
6-1/4" 7-868-8060 883.26 1.654 2500 25
8" 7-868-8080 1,235.49 2.165 2200 42
10" 7-868-8100 1,618.05 2.992 1900 78
12-1/2" 7-868-8120 2,289.96 4.055 1500 128
Type 3865
Type 3864
4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Set of fine adjustment screws• 2 Hex keys
Type 3765
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
6-1/4" 7-847-0600 1,356.21 1.654 2500 22
8" 7-847-0800 1,555.08 2.165 2200 37
10" 7-847-1000 2,060.58 2.992 1900 65
12-1/2" 7-847-1200 2,559.66 4.055 1500 119
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 362
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
363
SET-TRU
SCR
OLL
CH
UC
KB
AC
KPLA
TES
SET-TRU Backplates
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
.
ChuckDia
PartNumber Retail Price Taper
Size A D E F C HMounting
HolesG
K B1 B
SpindleMounting
BoltsN
Numberof
Bolts
Wtlbs
5"
7-874-054 180.57 A4 4.92 2.500
1.378
3.252
2.164 4.252 M8 x 1.25
.87
.55
1.42 7/16 - 14
4
4.8
7-874-055 200.25 A5 4.92 3.2505 4.126 .87 1.42 7/16 - 14 4.2
7-874-056 212.79 A6 6.30 4.1880 5.252 .53 1.89 1/2 - 13 9.1
6-1/4"7-874-065 215.19 A5
6.303.2505
1.6544.126
3.385 5.512 M10 x 1.5.82
.691.45 7/16 - 14
46.77
7-874-066 234.45 A6 4.1880 5.252 .82 1.65 1/2 - 13 6.97
8"7-874-085 231.60 A5
7.873.2505
2.1654.126
4.330 6.929 M10 x 1.5.62
.661.428 7/16 - 14
49.3
7-874-086 251.67 A6 4.1880 5.252 1.10 1.77 1/2 - 13 13.5
10"
7-874-105 309.24 A5
9.84
3.2505
2.992
4.126
5.708 8.819 M12 x 1.75
.74
.74
1.49 7/16 - 14
4
17.3
7-874-106 309.24 A6 4.1880 5.252 .74 1.49 1/2 - 13 17.3
7-874-108 322.80 A8 5.5007 6.748 1.06 1.81 5/8 - 11 20.2
12-1/2"
7-874-126 441.36 A6
12.40
4.1880
4.055
5.252
7.076 11.260 M16 x 2
.74
.74
1.49 1/2 - 13
4
27.3
7-874-128 458.55 A8 5.5007 6.748 1.06 1.81 5/8 - 11 35.7
7-874-129 472.26 A11 7.7507 9.252 1.42 2.17 3/4 - 10 41.20
15-3/4"
7-874-166 586.14 A6
11.75
4.1880 4.055 5.252
– 6.748 5/8 - 111.38 – 1.38 1/2 - 13
6
31.4
7-874-168 586.14 A8 5.5007 5.346 6.748 1.14 – 1.46 5/8 - 11 28.8
7-874-169 651.18 A11 7.7507 5.354 9.252 1.06 – 1.89 3/4 - 10 35.8
20"
7-874-208 1,005.45 A8
16.02
5.5007 5.346 6.748
– 9.252 3/4 - 101.42 – 1.42 5/8 - 11
6
69
7-874-209 1,010.40 A11 7.7507 7.590 9.252 1.18 – 1.42 3/4 - 10 61
7-874-215 1,088.91 A15 11.2505 7.480 13.000 1.18 – 2.05 7/8 - 9 76
25"
7-874-258 1,432.86 A8 16.02 5.5007 5.346 6.748
– 13.0003/4 - 10
1.42 – 1.42 5/8 - 11
6
69
7-874-259 1,442.58 A11 16.02 7.7507 7.590 9.252 1.42 – 1.42 3/4 - 10 61
7-874-260 1,462.02 A15 16.02 11.25059.921
13.000 2.05 – 2.05 7/8 - 9 76
7-874-265 1,462.02 A20 21.00 16.2518 18.252 1 - 8 2.76 – 2.76 1 - 8 90
G
Type AChuck Diameters: 15-3/4" to 25"
Chuck Diameters: 5" to 12-1/2"
Fully Machined Type A Steel Backplates for SET-TRU Chucks• Designed to Mount on A1 and A2 American Standard Spindles
Type 8215
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 363
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU BackplatesSE
T-TR
USC
RO
LLC
HU
CK
BA
CK
PLA
TES
364 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type D
ChuckDia
PartNumber Retail Price Taper
Size
StudsA F D E C H Mounting
Holes G B1 B WtlbsQty Dia
4"7-875-043 217.77 D1-3 3 9/16" 3.94 2.78 2.1250
.787 1.771 3.268 M8 x 1.25 .471.50 3.31
7-875-044 233.58 D1-4 3 5/8" 4.25 3.25 2.5005 1.57 3.97
5"
7-875-053 254.37 D1-3 3 9/16" 4.92 2.78 2.1250
1.378 2.164 4.252 M8 x 1.25 .55
1.57 5.95
7-875-054 273.69 D1-4 3 5/8" 4.92 3.25 2.5005 1.54 5.73
7-875-055 298.53 D1-5 6 3/4" 5.31 4.13 3.2503 1.73 6.92
7-875-056 278.46 D1-6 6 7/8" 7.12 5.25 4.1878 1.89 13.06
7-875-058 335.49 D1-8 6 1" 8.86 6.45 5.50075 2.09 15.00
6-1/4"
7-875-063 312.00 D1-3 3 9/16"
6.30
2.78 2.1250
1.654 3.385 5.512 M10 x 1.5 .63
1.81 10.80
7-875-064 312.00 D1-4 3 5/8" 3.25 2.5005 1.81 9.92
7-875-065 312.00 D1-5 6 3/4" 4.13 3.2503 1.81 9.89
7-875-066 320.67 D1-6 6 7/8" 6.69 5.25 4.1878 1.97 13.00
7-875-068 373.38 D1-8 6 1” 6.30 6.75 5.50075 1.54 25
8"
7-875-083 336.99 D1-3 3 9/16"
7.87
2.78 2.1250 2.024
4.330 6.929 M10 x 1.5 .67
1.30 10.36
7-875-084 341.40 D1-4 3 5/8" 3.25 2.5005
2.165
1.30 10.36
7-875-085 353.16 D1-5 6 3/4" 4.13 3.2503 1.85 15.87
7-875-086 369.27 D1-6 6 7/8" 5.25 4.1878 2.01 17.64
7-875-088 373.98 D1-8 8 1" 8.86 6.75 5.50075 2.24 20.00
10"
7-875-104 436.98 D1-4 3 5/8"
9.84
3.25 2.6005 2.382
5.708 8.819 M12 x 1.75 .75
1.50 18.84
7-875-105 440.40 D1-5 6 3/4" 4.13 3.2510 3.130 1.50 17.64
7-875-106 463.89 D1-6 6 7/8" 5.25 4.1878 2.992 2.09 28.44
7-875-108 495.21 D1-8 6 1" 6.75 5.50075 2.992 2.36 32.41
12-1/2"
7-875-126 616.02 D1-6 6 7/8"
12.40
5.25 4.1878
4.055 7.086 11.260 M16 x 2 .75
1.50 28.44
7-875-128 721.14 D1-8 6 1" 6.75 5.50075 2.24 47.84
7-875-129 739.80 D1-11 6 1-3/16" 9.25 7.75055 2.52 52.91
15-3/4"
7-875-166 871.26 D1-6 6 7/8"
11.75
5.25 4.1878 4.055
– 6.748 5/8 - 11 –
1.38 29.0
7-875-168 871.26 D1-8 6 1" 6.75 5.500755.358
1.50 27.2
7-875-169 893.43 D1-11 6 1-3/16" 9.25 7.75055 1.89 26.8
20"
7-875-208 1,209.75 D1-8 6 1"
16.02
6.75 5.50075 5.358
– 9.252 3/4 - 10 –
1.50 74
7-875-209 1,255.53 D1-11 6 1-3/16" 9.25 7.75055 7.590 1.73 78
7-875-215 1,274.19 D1-15 6 1-3/8" 13.00 11.2505 7.480 2.05 83
25"7-875-258 1,386.06 D1-8 6 1"
16.026.75 5.50075 5.358
– 13.071 3/4 - 10 –1.50 74
7-875-259 1,469.01 D1-11 6 1-3/16" 9.25 7.75055 7.590 1.73 78
Chuck Diameters: 15-3/4" to 25"Chuck Diameters: 4" to 12-1/2"
Fully Machined Type D Steel Backplates for SET-TRU Chucks• Type D1 AmericanStandard Camlock Spindles
Type 8245
See page 375 for Camlock Studs
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 364
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
365
SET-TRU
SCR
OLL
CH
UC
KB
AC
KPLA
TES
SET-TRU Backplates
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
PartNumber Retail Price Thread
d G E F L C K MNumber
ofBolts
Wtlbs
4" 7-876-042 127.92 1-1/2 - 8 UN-2B 1.5150 1.771 3.268 1.54 0.47 .51 M8 x 1.25 3 5.29
5"
7-876-052 152.04 1-1/2 - 8 UN-2B 1.5150
2.164 4.252
1.54
0.55 .51 M8 x 1.25 3
6.61
7-876-054 151.38 2-3/16 - 10 Hardinge 2.1889 2.44 7.05
7-876-056 152.04 2-1/4 - 8 UN-2B 2.260 1.54 6.8
6-1/4"
7-876-062 178.32 1-1/2 - 8 UN-2B 1.5150
3.385 5.512
1.50
0.63 .59 M10 x 1.5 3
7.05
7-876-064 175.80 2-3/16 - 10 Hardinge 2.1889 1.61 7.50
7-876-066 178.32 2-1/4 - 8 UN-2B 2.2600 1.75 7.94
8"
7-876-082 223.92 1-1/2 - 8 UN-2B 1.5150
4.330 6.929
1.50
0.67 .59 M10 x 1.5 3
9.92
7-876-083 223.92 2-1/4 - 8 UN-2B 2.2600 1.75 11.46
7-876-084 223.92 2-3/8 - 6 UN-2B 2.3850 2.00 13.89
10" 7-876-104 262.13 2-3/8 - 6 UN-2B 2.3850 5.708 8.819 2.00 0.74 .75 M12 x 1.75 3 30.0
Fully Machined Threaded Steel Backplates for SET-TRU Chucks
Threaded
Type 8285
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 365
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU BackplatesSE
T-TR
USC
RO
LLC
HU
CK
BA
CK
PLA
TES
366 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
.
ChuckDia
PartNumber Retail Price Taper
Size A D E C H F B1 B GNumber
ofStuds
Wtlbs
6-1/4" 7-920-066 228.58 C-6 6.30 4.188 1.65 3.385 5.512 5.252 .63 1.26 M10 x 1.5 4 6.0
8" 7-920-086 285.60 C-6 7.87 4.188 2.17 4.330 6.929 5.252 .67 1.57 M10 x 1.5 4 12.0
10" 7-920-106 335.64 C-6 9.84 4.188 2.99 5.708 8.819 5.252 .75 1.69 M12 x 1.75 4 28.0
12-1/2" 7-920-128 550.47 C-8 12.4 5.501 4.06 7.086 11.26 6.748 .75 1.69 M16 x 2 4 48.0
15-3/4"7-920-168 734.85 C-8
11.755.501 5.35
– 6.756.75
– 1.46 5/8 - 114 27
7-920-169 611.97 C-11 7.751 4.72 9.25 6 25
20"7-920-208 1,008.21 C-8
16.025.501 5.35
– 9.256.75
– 1.42 3/4 - 104 70
7-920-209 1,001.22 C-11 7.751 7.57 9.25 6 66
25" 7-920-259 1,613.97 C-11 16.02 7.751 7.57 – 13.0 9.25 – 1.42 3/4 - 10 6 66
Chuck Diameters: 15-3/4" to 25"Chuck Diameters: 5" to 12-1/2"
Type C
Fully Machined Type C Steel Backplates for SET-TRU Chucks• DIN 55027
Type 8235
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 366
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
367
SET-TRU
SCR
OLL
CH
UC
KB
AC
KPLA
TES
SET-TRU Backplates
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber Retail Price Taper
Size D ThreadT - UNS3 G d E F M J C L Wt
lbs
5" 7-879-9051 203.37 L00 4.92 3-3/4 - 6 2.750 2.20 2.164 4.252 M10 x 1.5 – 0.55 – 7.5
6-1/4"7-879-9061 219.42 L00
6.303-3/4 - 6 2.750 2.20
3.385 5.51 M10 x 1.5 0.79 0.63 2.569.0
7-879-9062 231.57 L0 4-1/2 - 6 3.250 2.60 9.5
8"
7-879-9081 207.21 L00
7.87
3-3/4 - 6 2.750 2.20
4.330 6.93 M10 x 1.5 0.79 0.672.56
15.0
7-879-9082 214.92 L0 4-1/2 - 6 3.250 2.60 15.4
7-879-9083 230.34 L1 6 - 6 4.125 3.35 2.99 16.5
10"
7-879-9101 280.35 L00
9.84
3-3/4 - 6 2.750 2.20
5.708 8.82 M12 x 1.75 0.91 0.752.76
25.0
7-879-9102 280.35 L0 4-1/2 - 6 3.250 2.60 26.1
7-879-9103 280.35 L1 6 - 6 4.125 3.35 2.99 37.0
12-1/2"
7-879-9122 477.33 L0
12.40
4-1/2 - 6 3.250 2.60
7.086 11.26 M16 x 2 0.91 0.75
2.7637.0
7-879-9123 477.33 L1 6 - 6 4.125 3.35 2.99
7-879-9124 516.42 L2 7-3/4 - 5 5.250 4.29 3.50 38.8
15-3/4"
7-879-9163 661.38 L1
11.75
6 - 6 4.125 3.35
– 6.75 5/8 - 11 0.87 –
2.95 34.2
7-879-9164 734.55 L2 7-3/4 - 5 5.250 4.29 3.46 45.4
7-879-9165 792.90 L3 10-3/8 - 4 6.500 5.43 3.94 67.2
20" 7-879-9264 1,283.04 L2 16.02 7-3/4 - 5 5.250 4.29 – 9.25 3/4 - 10 1.18 – 3.66 60.2
Fully Machined Type L Steel Backplates for SET-TRU Chucks
Type LChuck Diameters: 15-3/4" thru 25"Chuck Diameters: 5" thru 12-1/2"
Type 8255
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 367
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU BackplatesSE
T-TR
USC
RO
LLC
HU
CK
BA
CK
PLA
TES
368 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Base Plates for Rotary Tables• Perfect for all rotary tables with 3/6 and 4/8 T-Slots• Designed for use with BISON-BIAL SET-TRU chucks• Base plates are supplied with four mounting bolts,T-nuts and one MT pin
• See pages 478-479 for more information
ChuckDia
Base Plate
PartNumber Retail Price Wt
lbs
5" 7-872-605 187.35 3.9
6-1/4" 7-872-606 220.71 11.5
8" 7-872-608 270.06 16.8
10" 7-872-610 305.34 27.4
12-1/2" 7-872-612 421.50 46.3
15-3/4" 7-872-616 605.61 40.0
20" 7-872-620 922.26 77.0
Chuck Base Plates for Milling Machine Tables• Perfect for all milling machine tables• Designed for use with BISON-BIAL SET-TRU chucks• See pages 478-479 for more information
ChuckDia
5CBackplate
Part NumberRetail Price 3-Jaw
Chucks Retail Price 6-JawChucks Retail Price OAL Chuck Body
Height**
ClampingRange
Min-Max
4" 7-912-304 214.18 7-866-8040* 899.43 7-868-8040* 906.90 7.29 2.68 .12 - 3.66
5" 7-912-305 230.62 7-866-0500 996.78 7-868-0500 1,080.42 7.12 2.362 .12 - 4.92
6-1/4" 7-912-306 275.74 7-866-0600 839.97 7-868-0600 1,160.97 7.95 2.677 .12 - 6.3
* 4" solid jaws only** Chuck dimensions can be found on page 359
Type 8288
Type 9452
Back View
Fully Machined 5C Steel Backplates for3 and 6-Jaw SET-TRU Chucks• Backplates and SET-TRU chucks are sold separately
MT Pin
PartNumber Retail Price MT
7-872-932 13.05 2
7-872-933 14.28 3
7-872-933 14.28 3
7-872-934 15.57 4
7-872-935 54.00 5
ChuckDia
Base Plate
PartNumber Retail Price Wt
lbs
6-1/4" 7-630-606 248.70 10.3
8" 7-630-608 285.63 16.2
10" 7-630-610 341.67 25.0
12-1/2" 7-630-612 430.92 35.5
Type 8298
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 368
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
369
SET-TRU
SCR
OLL
CH
UC
KJA
WS
SET-TRU Scroll Chuck Jaws
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price 6-JawPart Number Retail Price
5" 7-885-305 144.33 – – 7-885-605 303.216-1/4" 7-885-306 154.47 7-885-406 222.72 7-885-606 317.888" 7-885-308 169.17 7-885-408 243.93 7-885-608 370.8610" 7-885-310 217.80 7-885-410 312.27 7-885-610 460.35
12-1/2" 7-885-312 299.22 7-885-412 433.74 7-885-612 643.0515-3/4" 7-885-316 397.56 – – 7-885-616 779.5520" 7-885-320 726.69 – – 7-885-620 1,593.1225" 7-885-325 859.29 – – 7-885-625 2,204.43
ChuckDia
K H G F J S L D E B OALA
ThreadM
2-Jaw 3-Jaw 4-Jaw 6-Jawinches Wt of Set – lbs
5" 5/8 57/64.4996 5/16
.1575 .1260
.4724.3150 .3150 .7874
2.1259 5/16 - 18 – 0.93 – 1.96-1/4" 3/4 1-1/8
.55112.5590
3/8 - 16.80 1.20 1.60 2.40
8" 7/8 1-3/8 .3543 .3937 .9843 3.1102 1.40 2.10 2.80 4.2010" 1-1/16 1-9/16
.7496 1/2
.6299.4331
.47241.1024 3.6220
1/2 - 132.13 3.20 4.27 6.40
12-1/2" 1-1/4 1-7/8 .5000 1.2598 4.3307 3.40 5.10 6.80 10.2015-3/4"
1-1/2 2-1/4 .2835 .2480.8661 .5906
.55121.4173 5.1181 5/8 - 11 – 7.30 – 14.60
20"1.2598 .6299
1.5748 6.53513/4 - 10
– 14.4 – 28.8025" 1.9685 8.2677 – 27.1 – 44.20
Hard Master Jaws for 3, 4, and 6-Jaw SET-TRU Chucks• American Standard Tongue and Groove Jaws• Sold in sets
5" to 10" Diameters 20" Diameter 25" to 32" Diameters12" and 16" Diameters
3 Piece Set 6 Piece Set
All solid jaws and master jaws are manufactured to BISON-BIAL’s rigid specifications
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 369
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Scroll Chuck JawsSE
T-TR
USC
RO
LLC
HU
CK
JAW
S
370 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia M H G J K D E F N C B OAL
A O P3-Jaw 4-Jaw 6-Jaw
Wt of Set lbs5" 5/8 57/64
.4996.35 .59
.3129
.157
.1260
.315 1.516 .866 2.205 .57 1.38 0.93 – 1.906-1/4" 3/4 1-1/8
.43 .71.335 1.634 .984 2.638 .71 1.63 1.20 1.60 2.40
8" 7/8 1-3/8 .374 1.713 1.063 3.174 .85 2.01 2.10 2.80 4.2010" 1-1/16 1-9/16
.7496
.55 .78
.5004
.472 2.023 1.280 3.740 .96 2.32 3.20 4.27 6.4012-1/2" 1-1/4 1-7/8 .512 2.165 1.457 4.331 1.04 2.68 5.10 6.80 10.2015-3/4"
1-1/2 2-1/4.71 1.0
.2480.532 2.539 1.654
5.0001.06 3.01 7.30 – 14.60
20".87 1.3
.689 2.933 1.654 1.97 3.46 14.40 – 28.8025" .827 3.228 2.047 2.01 3.50 27.10 – 44.20
ChuckDia
3-JawPart Number Retail Price
3-JawEnhanced Serration
Part NumberRetail Price 4-Jaw
Part Number Retail Price 6-JawPart Number Retail Price
5" 7-883-305 160.02 – – – – 7-883-605 270.456-1/4" 7-883-306 196.29 – – 7-883-406 229.05 7-883-606 369.818" 7-883-308 212.94 – – 7-883-408 301.38 7-883-608 443.9410" 7-883-310 249.51 7-883-3100 333.60 7-883-410 342.18 7-883-610 522.45
12-1/2" 7-883-312 307.62 7-883-3120 413.70 7-883-412 421.20 7-883-612 642.6315-3/4" 7-883-316 417.69 7-883-3160 558.34 – – 7-883-616 878.0720" 7-883-320 744.09 7-883-3200 1,108.10 – – 7-883-620 1,671.3325" 7-883-325 853.68 7-883-3250 1,174.21 – – 7-883-625 2,021.43
Hard Top Jaws for 3, 4, and 6-Jaw Chucks• American Standard Tongue and Groove Jaws• Sold in sets
3 Piece Set 6 Piece Set
Jaw mounting bolts can befound on page 374
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 370
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
371
SET-TRU
SCR
OLL
CH
UC
KJA
WS
SET-TRU Scroll Chuck Jaws
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number
4-JawPart Number
6-JawPart Number
C L B F E N P O Wt of Set - lbs
inches 3-Jaw 4-Jaw 6-Jaw
4" 7-881-304 – 7-881-604 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 – 1.16
5" 7-881-305 – 7-881-605 1.5748 2.0079 .7874 .3150 .3150 .3150 1.319 .512 1.2 – 2.4
6-1/4" 7-881-306 7-881-406 7-881-606 2.0866 2.7559 .7874 .3150 .3150 .3937 1.772 .748 2.4 3.2 4.8
8" 7-881-308 7-881-408 7-881-608 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3 6.5
10" 7-881-310 7-881-410 7-881-610 2.4803 4.1339 1.1024 .4331 .4724 .5512 2.736 1.102 5.2 7.0 10.
12-1/2" 7-881-312 7-881-412 7-881-612 2.8740 4.9213 1.2598 .5000 .4724 .7087 3.268 1.358 8.7 12 18
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price 6-JawPart Number Retail Price
7-881-304 99.54 – – 7-881-604 222.43
7-881-305 118.80 – – 7-881-605 253.00
7-881-306 136.53 7-881-406 199.65 7-881-606 299.52
7-881-308 145.50 7-881-408 206.70 7-881-608 317.40
7-881-310 180.54 7-881-410 253.83 7-881-610 385.74
7-881-312 296.19 7-881-412 430.56 7-881-612 570.78
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price 6-JawPart Number Retail Price
7-880-304 109.86 – – 7-880-604 210.66
7-880-305 118.80 – – 7-880-605 241.35
7-880-306 136.53 7-880-406 199.65 7-880-606 299.52
7-880-308 145.50 7-880-408 206.70 7-880-608 299.04
7-880-310 180.24 7-880-410 253.83 7-880-610 385.74
7-880-312 296.19 7-880-412 430.56 7-880-612 570.78
ID Hard Solid Jaws for 3, 4, and 6-Jaw Chucks• Sold in sets
ChuckDia
3-JawPart Number
4-JawPart Number
6-JawPart Number
C L B F E N P O Wt of Set - lbs
inches 3-Jaw 4-Jaw 6-Jaw
4" 7-880-304 – 7-880-604 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 – 1.16
5" 7-880-305 – 7-880-605 1.5748 2.0079 .7874 .3150 .3150 .3150 1.319 .512 1.2 – 2.4
6-1/4" 7-880-306 7-880-406 7-880-606 2.0866 2.7559 .7874 .3150 .3150 .3937 1.772 .748 2.4 3.2 4.8
8" 7-880-308 7-880-408 – 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3 6.5
10" 7-880-310 7-880-410 7-880-610 2.4803 4.1339 1.1024 .4331 .4724 .5512 2.736 1.102 5.2 7.0 10.
12-1/2" 7-880-312 7-880-412 7-880-612 2.8740 4.9213 1.2598 .5000 .4724 .7087 3.268 1.358 8.7 12 18
OD Hard Solid Jaws for 3, 4, and 6-Jaw Chucks• Sold in sets
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 371
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Scroll Chuck JawsSE
T-TR
USC
RO
LLC
HU
CK
JAW
S
372 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia A B C D E F G H I J K
BoltSizeM
3, 4, and6-Jaw
Wt per Pclbs
5" 2.520 0.866 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
– 5/16 - 18 .66
6-1/4" 3.071 1.000 1.634 0.8386 1-1/2 1.339 .1183/8 - 16
1.01
8" 3.543 1.063 1.713 0.9488 1-3/4 1.575 .197 1.43
10" 4.173 1.280 2.028
.5000
1.0827 2-1/8
.750
1.772 .3151/2 - 13
2.54
12-1/2" 4.724 1.457 2.165 1.2087 2-1/2 2.087
.2480
.394 3.53
15-3/4" 5.512 1.654 2.539 1.3443
3 2.480 .406
.512 5/8 - 11 4.85
20" 5.512 1.654 2.9331.3543
–3/4 - 10
5.29
25" 6.299 2.047 3.288 – 9.26
ChuckDia
3 and 4-JawPart Number Retail Price 6-Jaw
Part Number Retail Price
5" 7-884-305 16.00 – –
6" 7-884-306 18.90 7-884-606 32.70
8" 7-884-308 21.40 7-884-608 36.54
10" 7-884-310 31.10 7-884-610 52.10
12" 7-884-312 42.10 7-884-612 65.54
16" 7-884-316 54.40 7-884-616 90.66
20" 7-884-320 115.78 – –
25" 7-884-325 165.63 – –
Soft Top Jaws for 3, 4, and 6-Jaw Chucks• American Standard Tongue and Groove Jaws• Sold by piece
For 2, 3 and 4-Jaw Chucks For 6-Jaw Chucks
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail PriceC L B F E Wt of Set - lbs
inches 3-Jaw 4-Jaw
4" 7-882-304 75.09 – – 1.2598 1.6535 .5906 .2362 .2362 .86. –
5" 7-882-305 79.11 – – 1.5748 2.0079.7874 .3150 .3150
1.7 –
6-1/4" 7-882-306 91.47 7-882-406 134.31 2.0866 2.7559 3.3 4.4
8" 7-882-308 105.18 7-882-408 151.74 2.1260 3.3465 .9843 .3543 .3937 5.3 7.1
10" 7-882-310 132.99 7-882-410 195.12 2.4803 4.1339 1.1024 .4331 .4724 9.0 12
12-1/2" 7-882-312 212.07 7-882-412 329.70 2.8740 4.9213 1.2598 .5000 .4724 13 17
Soft Solid Jaws for 3 and 4-Jaw Chucks• Sold in sets
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 372
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
373
SET-TRU
SCR
OLL
CH
UC
KSPA
RE
PAR
TS
SET-TRU Spare Parts
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Scroll
PartNumber
RetailPrice D H Wt
lbs
4" 7-887-304 106.44 2.74 0.49 0.34
5" 7-887-505 155.46 3.7 0.63 0.84
6" 7-887-506 184.50 4.88 0.83 2.03
8" 7-887-508 227.43 6.24 0.94 3.62
10" 7-887-510 307.08 7.82 1.1 4.54
12" 7-887-512 407.28 10.1 1.2 10.2
16" 7-887-516 978.21 12.9 1.3 22.7
20" 7-887-520 2,244.42 16.4 1.2 36.4
25" 7-887-525 3,050.79 21.3 1.6 66.0
Half Ring
PartNumber
RetailPrice D
7-888-904* 3.33 –
7-888-705 4.71 1.52
7-888-706 6.18 1.72
7-888-708 6.96 1.85
7-888-710 8.40 1.94
7-888-712 10.35 2.17
7-888-716 14.04 2.42
7-888-720 12.39 2.76
7-888-725 18.48 2.95
Pinion Sleeve
PartNumber
RetailPrice ID
– – –
7-888-505 12.20 0.98
7-888-506 17.70 1.1
7-888-508 19.20 1.2
7-888-510 27.09 1.4
7-888-512 29.16 1.5
7-888-516 46.92 1.7
7-888-520 54.212
7-888-525 66.45
ChuckDia
Wrench*
PartNumber
RetailPrice
SquareSize
4" 7-889-005 32.520.35
5" 7-889-005 32.52
6" 7-889-008 34.590.43
8" 7-889-008 34.59
10" 7-889-012 43.500.55
12" 7-889-012 43.50
16" 7-889-016 61.50 0.67
20" 7-889-025 94.140.75
25" 7-889-025 94.14
Pinion
PartNumber
RetailPrice D H Wt
lbs
7-886-304 30.870.98
1.4 0.12
7-886-505 36.90 1.44 0.13
7-886-506 40.50 1.1 1.57 0.18
7-886-508 47.82 1.2 1.99 0.37
7-886-510 57.63 1.4 2.36 0.44
7-886-512 71.16 1.5 2.85 0.71
7-886-516 94.80 1.7 3.66 1.3
7-886-520 266.222
4.45 2.1
7-886-525 319.77 5.24 2.5
Spare Parts for 3, 4, and 6-Jaw Chucks with Forged Steel Body
* Wrenches are spring loaded for the operator’s safetyRemoval of the spring is not recommended and may void chuck warranty
D = Outer DiameterH = HeightL = OAL
* Pinion retaining screw
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 373
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
SET-TRU Spare PartsSE
T-TR
USC
RO
LLC
HU
CK
SPA
RE
PAR
TS
374 SET-TRU SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
ScrewPart Number
RetailPrice
Screw Sizemm L Number of
Screws
4"7-897-6040* 15.90 M10 x 1
1.02 47-897-6041 9.54
M12 x 15" 7-897-6051 10.30 1.34
46" 7-897-6061 13.15
M18 x 1
1.42
8" 7-897-6081 13.44 1.70
10" 7-897-6101 13.44 2.03
12" 7-897-6121 13.73 2.62
16" 7-897-6161 13.95 1.93
820" 7-897-6201 13.15 1.77
25" 7-897-6251 16.90 4.33
Fine Adjustment Screws• Sold by piece
* For 6-jaw chucks only
ChuckDia Thread
Screw Number 1
Short Screw
Part Number Retail Price L
5" 5/16 - 18 7-897-503 9.18
.756-1/4"3/8 - 16 7-897-510 9.41
8"
10"1/2 - 13 7-897-530 10.08 1.00
12-1/2"
15-3/4" 5/8 - 11 7-897-540 9.79 1.25
20"3/4 - 10 7-897-558 7.68 1.50
25"
Screw Number 2Long Screw
Part Number Retail Price L
7-897-504 8.99 1.00
7-897-512 10.05 1.25
7-897-531 10.08 1.50
7-897-541 9.79 1.75
7-897-561 15.97 3.00
7-897-562 14.11 3.25
Mounting Bolts for Hard and Soft Top Jaws• Sold by piece
L
Step Jaws
Soft Jaws
Hex KeyPart Number
RetailPrice
6-999-585 .81
6-999-586 .99
6-999-590 1.35
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 374
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
375
SET-TRU
SCR
OLL
CH
UC
KSPA
RE
PAR
TS
SET-TRU Spare Parts
Quality Products • Partnership • Industry Experts SET-TRU SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TaperSize
Camlock Studs
Part Number Retail Price Dia Thread
D1-3 7-899-103 21.48 9/16"M10 x 1
D1-4 7-899-104 22.77 5/8"
D1-5 7-899-105 25.02 3/4" M12 x 1
D1-6 7-899-106 28.92 7/8" M16 x 1.5
D1-8 7-899-108 33.27 1" M20 x 1.5
D1-11 7-899-111 45.84 1-3/16" M22 x 1.5
D1-15 7-899-115 103.20 1-3/8" M24 x 1.5
Set ScrewPart Number Retail Price Number of
Studs
7-899-305 12.513
67-899-310 12.51
Camlock Studs and Set Screws• Sold by piece
ChuckDia Part Number Retail Price Bolt
Size L Number ofBolts
4" and 5" 7-897-705 9.54 M8 x 1.25 2.756
3
6" 7-897-706 7.13M10 x 1.5
2.756
8" 7-897-708 16.10 3.149
10" 7-897-710 22.56 M12 x 1.75 3.543
12" 7-897-712 16.78 M16 x 2 3.937
16" 7-897-716 14.80 5/8 x 11 4.330
620" 7-897-720 11.403/4 x 10
4.724
25" 7-897-725 12.20 5.118
Chuck Mounting Bolts• Sold by piece
Type C, DIN Studs• Sold by piece
L
TaperSize
PartNumber Retail Price Stud Dia
inchStud Dia
mmThread
mmNumber of
Studs
C-4 7-921-904 12.48 .7677 19.5 M10 - 39 3
C-5 7-921-905 12.81 .7677 19.5 M10 - 43
4C-6 7-921-906 14.46 .8465 21.5 M12 - 50
C-8 7-921-908 17.40 1.063 27.0 M16 - 60
C-11 7-921-911 24.45 1.339 34.0 M20 - 75 6
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 375
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SCR
OLL
CH
UC
KS
376 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3 and 4-Jaw Self-Centering Scroll Chucks
Forged Steel
• Extremely accurate and guaranteed to maintain exceptionalaccuracy for an extended period of time
• Chucks have a modern and compact design• Use whenever high precision machining is needed
Chuck Body
• Drop forged of high grade Steel then put through precisemachining operations
• All bearing surfaces are carefully hardened and precisely ground
Scroll Plate• Drop forged of fine quality Alloy Steel and carefully case hardened• Thread flanks are ground on both sides• Each scroll is balanced
Jaws• Made of fine Alloy Steel
Teeth and Guides• Hardened and fully ground on both sides
Pinions• Hardened and ground fine Alloy Steel
Bushings• Made of fine Alloy Steel• Hardened ground and the pressed into the pinion seats
Precision grinding of scroll plate and jaw teethallows you to:• Eliminate the possibility of deformation as a result ofheat treatment
• Reach uniform radial gripping force on all teeth of jaws• Increase guarantee period for high centering accuracy• Increase the gripping force
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-5...4. Pinion 7-886-5...5. Pinion Half Ring 7-888-7...6. Pinion Sleeve 7-888-5..7. Hard Master Jaws 7-885-...8. Hard Top Jaws 7-883-...9. Grease Nipple10. Back Cover Mounting Bolts11. Chuck Mounting Bolts 7-897-...12. Back Cover Locating Pin13. Mounting Bolts14. ChuckWrench 7-889-0...15 and 16. Jaw mounting bolts 7-897-5..
Hardenedand GroundSurfaces
Outstanding Accuracy and Quality
American StandardTongue and Groove Jaws
BISON-BIAL recommended chuck grease:Part Number 7-799-025
Backplates: pages 381-384Jaws: pages 386-389Spare Parts: page 390
• Each scroll chuck is assembled and statically balancedto high tolerance levels
• Interstage and final inspections ensure high quality
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:27 PM Page 376
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
377
PREC
ISION
SCR
OLL
CH
UC
KS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
5" 7-820-0500 647.28 1.3976 4800 11
6-1/4" 7-820-0600 743.82 1.6535 4500 22
8" 7-820-0800 893.58 2.1654 4000 39
10" 7-820-1000 1,201.77 2.9921 3500 55
12-1/2" 7-820-1200 1,699.11 4.0551 2800 110
15-3/4" 7-820-1600 2,934.27 5.3543 2000 187
20" 7-820-2000 7,961.97 7.480 1200 320
25" 7-820-2500 11,039.85 9.921 1000 551
Front View of 20" and 25" ChucksSee page 378 for T-slot Dimensions
3 and 4-Jaw Self-Centering Scroll ChucksForged Steel Body Plain Back Chucks, Backplates Required 3 Pinion Design
Front View
Back View
3-Jaw Scroll Chucks with Two-Piece Hard Reversible JawsEach chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts
• 2 Hex keys• Eye bolts for chuck sizes15-3/4" diameter and larger
Type 3505
3-Jaw Scroll Chucks with Two Sets of Hard Solid JawsEach chuck is provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench
• 1 Set of mounting bolts• 1 Hex key
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
4" 7-829-0400 431.04 .7874 5200 6.17
5" 7-829-0500 479.13 1.3976 4800 11
6-1/4" 7-829-0600 529.87 1.6535 4500 22
8" 7-829-0800 639.21 2.1654 4000 39
10" 7-829-1000 872.49 2.9921 3500 55
12-1/2" 7-829-1200 1,293.90 4.0551 2800 110
Type 3504
Prices are subject to change without noticeBISON-BIAL® Workholding products are exclusively distributed by Toolmex Corporation
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 377
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SCR
OLL
CH
UC
KS
378 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
Each chuck is provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4"diameter and larger
ChuckDia
PartNumber Retail Price Hole
DiaRPMmax
Wtlbs
6-1/4" 7-841-0600 813.60 1.6535 4500 22
8" 7-841-0800 971.61 2.1654 4000 39
10" 7-841-1000 1,363.98 2.9921 3500 55
15-3/4" 7-841-1600 3,074.25 5.3543 2000 187
25" 7-841-2500 9,124.02 9.921 1000 551
Type 3705
L
3 and 4-Jaw Self-Centering Scroll ChucksPrincipal Dimensions – Back Mounting
ChuckDiaD
F E d C H h h1
4" 3.2677 2.7559 0.7874 .1181 1.969 - 0.669
5" 4.2520 3.7402 1.3976
.1575
2.422 1.575 0.787
6-1/4" 5.5118 4.9213 1.6535 2.756 1.693 1.26
8" 6.9291 6.2992 2.1654 3.150 1.772 1.142
10" 8.8189 7.8740 2.9921
.1969
3.543 2.087 1.339
12-1/2" 11.2598 10.2362 4.0551 3.937 2.244 1.693
15-3/4" 14.2519 12.9921 5.3543 4.331 2.639 2.165
20" 18.0314 16.5354 7.4803 4.685 3.150 2.362
25" 23.0709 21.4567 9.9212 .2756 5.079 3.425 2.756
Backplate Mounting Bolts
PartNumber
RetailPrice
ThreadM L Numbr
of Bolts
7-897-105 8.99 M8 x 1.25
0.98
3
7-897-108 9.18 M10 x 1.5
6
7-897-110 10.08 M12 x 1.751.18
7-897-112 10.98
M16 x 27-897-125 10.98 1.57
See page 355 for clamping ranges
T-slot Dimensions
3-Jaw Chuck T-slot Dimensions for 20" and 25" Diameter Chucks Only
ChuckDia A B C E T-slot
Length20" .9055 .5512 .2362 .8268 4.51
25" 1.1811 .7087 .4724 1.0236 5.08
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 378
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
379
PREC
ISION
SCR
OLL
CH
UC
KS
Precision Scroll Chucks
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type A2 Type A1
Type A
ChuckDia
PartNumber Retail Price Taper
SizeHoleDia d
RPMmax
Wtlbs
B(A2)
B1(A1) G C/C1* H h
6-1/4" 7-821-0615 870.78 A1-5 1.6535 4500 22 – 2.4374 3.2505 .563 2.6772 1.693
8"7-821-0815 983.31 A1-5 1.6535
4000 42– 2.4374 3.2505 .563
3.0709 1.7727-821-0816 1,024.71 A1-6 2.1653 – 3.2500 4.1880 .625
10"7-821-1016 1,632.96 A1-6 2.1653
3500 71– 3.2500 4.1880 .625
3.5039 2.0877-821-1018 1,470.24 A1-8 2.9921 – 4.3750 5.5007 .688
12-1/2"7-821-1226 2,085.84 A2-6 4.0551
2800 1215.2520 – 4.1880 .630
3.7874 2.2447-821-1228 2,486.52 A1-8 3.1496 – 4.3750 5.5007 .688
15-3/4"7-821-1628 3,602.49 A2-8 5.3543
2000 2036.7480 – 5.5007 .709
4.2520 2.6397-821-1629 3,902.85 A1-11 5.1181 – 6.5000 7.7507 .750
20"7-821-2028 8,869.44 A2-8 5.3543
1200 3536.7480 – 5.5007 .709
4.6850 3.0917-821-2029 8,807.61 A2-11 7.4803 9.2520 – 7.7507 .787
25"7-821-2529 11,015.88 A2-11 7.4803
1000 6289.2520 – 7.7507 .750
5.0787 3.4257-821-2530 11,015.88 A2-15 9.9213 13.000 – 11.251 .813
ChuckDia
Mounting Bolts
Part Number Retail Price Thread L Qty
6-1/4" 7-897-520 5.60 7/16-14 2-3/8
38"
7-897-521 5.60 7/16-142-3/4
7-897-532 5.60 1/2-13
10"7-897-533 5.60 1/2-13 3-1/8
6
7-897-542 10.66 5/8-11 2-3/4
12-1/2"7-897-535 11.14 1/2-13 4
7-897-543 10.82 5/8-11 3-1/8
15-3/4"7-897-550 4.62 5/8-11
4-1/27-897-563 16.67 3/4-10
25"7-897-566 16.19 3/4-10
5-1/27-897-571 16.19 7/8-9
*C=C1, depth of counterbore
L
3-Jaw, Type A1/A2, Direct Mount Self-Centering Scroll Chuckswith Two Piece Hard Reversible Jaws
• Forged Steel body• Type A1 spindle has a 2 bolt hole pattern,inside (size B1), and outside the taper (size B)Either an A1 or A2 chuck will fit
• Type A2 spindle has 1 bolt pattern, outside the taper(size B) Only an A2 chuck will fit
Type 3515
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 379
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Scroll ChucksPR
ECIS
ION
SCR
OLL
CH
UC
KS
380 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw, Type D, Direct Mount Self-Centering Scroll Chuckswith Two Piece Hard Reversible Jaws
• Forged Steel body• No machining required
ChuckDiaD
TaperSize
PartNumber Retail Price
HoleDiad
RPMmax
Wtlbs B G C H h
6-1/4"
D1-3 7-823-0633 958.20
1.6535 4500 20
2.7795 2.1250.5118
2.6772 1.693D1-4 7-823-0634 957.90 3.2520 2.5005
D1-5 7-823-0635 963.15 4.1260 3.7505 .5629
8"D1-5 7-823-0835 1,171.89
2.1653 4000 424.1260 3.2505 .5629
3.0719 1.772D1-6 7-823-0836 1,161.96 5.2520 4.1880 .6299
10"D1-6 7-823-1036 1,567.32
2.9921 3500 715.2520 4.1880 .6299
3.5039 2.087D1-8 7-823-1038 1,567.32 6.7480 5.5007 .7087
12-1/2"
D1-6 7-823-1236 2,125.62
4.0551 2800 112
5.2520 4.1880 .62993.7874
2.244D1-8 7-823-1238 2,126.79 6.7480 5.5007 .7087
D1-11 7-823-1239 2,295.93 9.2520 7.7507 .7874 4.3976
15-3/4"D1-8 7-823-1638 3,640.92
5.3543 2000 2236.7480 5.5007 .7087
4.2570 2.639D1-11 7-823-1639 3,642.66 9.2520 7.7507 .7874
20"D1-8 7-823-2038 8,950.68 5.3543
1200 3316.7480 5.5007 .7087
4.6850 3.150D1-11 7-823-2039 8,385.00 7.5984 9.2520 7.7507 .7874
25"D1-8 7-823-2538 11,576.58 5.3543
1000 6046.7480 5.5007 .7087
5.0787 3.425D1-11 7-823-2539 11,583.00 7.4803 9.2520 7.7507 .7874
ChuckDiaD
Camlock Studs
Taper Size Part Number Retail Price OD Thread Qty
6-1/4"
D1-3 7-899-103 21.48 9/16 M10x13
D1-4 7-899-104 22.77 5/8 M10x1
D1-5 7-899-105 25.02 3/4 M12x1
6
8"D1-5 7-899-105 25.02 3/4 M12x1
D1-6 7-899-106 28.92 7/8 M16x1.5
10"D1-6 7-899-106 28.92 7/8 M16x1.5
D1-8 7-899-108 33.27 1 M21.5
12-1/2"
D1-6 7-899-106 28.92 7/8 M16x1.5
D1-8 7-899-108 33.27 1 M20x1.5
D1-11 7-899-111 45.84 1-3/16 M22x1.5
15-3/4"D1-8 7-899-108 33.27 1 M20x1.5
D1-11 7-899-111 45.84 1-3/16 M22x1.5
20"D1-8 7-899-108 33.27 1 M20x1.5
D1-11 7-899-111 45.84 1-3/16 M22x1.5
25"D1-8 7-899-108 33.27 1 M20x1.5
D1-11 7-899-111 45.84 1-3/16 M22x1.5
CamlockSet Screw
Part NumberRetail Price
7-899-305 12.51
7-899-310 12.51
Type D
Type 3545
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 380
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
381
PREC
ISION
SCR
OLL
CH
UC
KB
AC
KPLA
TES
Precision Backplates
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Rough-Finished Threaded Backplates for Threaded Spindles
ChuckDia
PartNumber Retail Price Thread
M A B C D h E Wtlbs
4"7-871-041 101.10 1-10
1.5352.165 1.01500
4.095 .709 .5000 87-871-042 101.10 1-1/2-8 2.677 1.51421
5"7-871-051 103.95 1-10
1.5352.165 1.01500
5.079 .709 .5000 107-871-052 103.95 1-1/2-8 2.677 1.51421
6-1/4"7-871-062 115.11 1-1/2-8 1.535
3.1891.51421
6.535 .787.5000
127-871-063 115.11 2-1/4-8 1.791 2.26000 .6260
8"7-871-082 132.81 1-1/2-8 1.535
3.5831.51421
8.110 .866.5000 12
7-871-083 132.81 2-1/4-8 1.791 2.26000 .6260 13
10"7-871-103 199.50 2-1/4-8 1.791
4.1732.26000
10.079 .984.6260 22
7-871-104 199.50 2-3/8-6 2.047 2.38500 .7480 25
12-1/2" 7-871-124 264.93 2-3/8-6 2.047 4.331 2.38500 12.638 1.102 .7480 33
NOTE: Rough Finished Backplates, see page 385 for mounting instructions
Type 8206
ChuckDia
PartNumber Retail Price Thread
D A C B B1 E Wtlbs
5"7-922-051 119.74 M39 x 4
4.923.00 2.00 .75
.626011
7-922-053 117.31 2-3/16 - 10 3.11 1.61 .689
6-1/4" 7-922-063 129.15 2-3/16 - 10 6.3 3.11 1.61 .768 13
Fully-Machined Threaded Backplates for Threaded Spindles
NOTE: Part number series 7-922- backplates require some machining on the counterboreprojection, see page 385 for more information
Type 8204
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 381
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision BackplatesPR
ECIS
ION
SCR
OLL
CH
UC
KB
AC
KPL
ATE
S
382 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Semi-Machined and Fully Machined Type D1 Backplates• The number of camlock studs needed varies depending on the spindle size; please refer to the table below• Plain back chucks require backplates which may require machining to fit• Designed for direct mounting on camlock spindle nose
** See mounting instructions on page 385*** The projection on the backplate must be sized to fit each chuck
Fully Machined D1 Backplates
Type 8242Type 8240
ChuckDia
TaperSize
Fully Machined*** Semi-Machined**StudDia
Numberof
Studs
HoleDiaC
D GPartNumber
RetailPrice
DiaA B B1 Wt
lbsPart
NumberRetailPrice
DiaA
FlangeThickness B
Wtlbs
4" D1-4 7-878-044 136.41 3.97 1.12 .87 3.65 – – – – – 5/8
3
2.40 3.25 2.50
5"D1-3 7-878-053 175.26
4.94 1.02.57
5.37-878-0530 164.34
5.00 1.02 8.09/16 2.02 2.78 2.13
D1-4 7-878-054 175.26 .87 7-878-0540 164.34 5/8 2.40 3.25 2.50
6-1/4"
D1-3 7-878-063 202.92
6.32
1.06 .71
9.5
7-878-0630 190.236.38
1.029.3
9/16 2.02 2.78 2.13D1-4 7-878-064 207.36 1.06 .71 7-878-0640 222.60 1.14 5/8 2.40 3.25 2.50D1-5 7-878-065 207.36 1.18 1.0 7-878-0650 222.60 1.14 3/4 3.13 4.13 3.25D1-6 7-878-066 207.36 1.44 1.32 – – – – – 7/8 4.06 5.25 4.19
8"
D1-3 7-878-083 235.02
7.89
1.06 .71
15.4
– –8.00
1.73
27
9/16 2.02 2.78 2.13D1-4 7-878-084 236.46 1.06 .71 7-878-0840 290.61 1.73 5/8 2.40 3.25 2.50D1-5 7-878-085 236.46 1.18 .71 – – – – 3/4
6
3.13 4.13 3.25D1-6 7-878-086 239.64 1.44 1.26 7-878-0860 290.70 8.00 1.38 7/8 4.06 5.25 4.19
10"D1-5 7-878-105 296.97
9.861.18 .87 24.3 – – – – – 3/4 3.13 4.13 3.25
D1-6 7-878-106 296.97 1.44 .87 24.3 7-878-1060 341.769.96 1.93 35
7/8 4.06 5.25 4.19D1-8 7-878-108 306.54 1.54 1.36 39.7 7-878-1080 347.13 1 5.35 6.75 5.50
12-1/2"D1-6 7-878-126 392.46
12.421.56 .94
39.77-878-1260 438.66
12.522.76
497/8 4.06 5.25 4.19
D1-8 7-878-128 407.76 1.65 .94 7-878-1280 470.19 2.17 1 5.35 6.75 5.50D1-11 7-878-129 423.00 1.85 1.36 7-878-1290 491.28 2.17 1-3/16 7.59 9.25 7.75
15-3/4"D1-6 7-878-166 546.03
15.771.44
1.10 79– – – – – 7/8 4.06 5.25 4.19
D1-8 7-878-168 638.79 1.54 7-878-1680 760.3515.94
2.7693
1 5.35 6.75 5.50D1-11 7-878-169 718.47 1.85 7-878-1690 829.56 1.96 1-3/16 7.59 9.25 7.75
20"D1-8 7-878-208 911.28
19.701.54
1.14 1327-878-2080 1,080.42
19.881.81
1591 5.35 6.75 5.50
D1-11 7-878-209 1,043.19 1.85 7-878-2090 1,173.21 2.83 1-3/16 7.59 9.25 7.75
25”D1-11 7-878-259 1,411.98
24.821.85
1.14 2327-878-2590 1,658.16 25.00 2.83 232 1-3/16 7.59 9.25 7.75
D1-15 7-878-265* 1,355.76 1.97 – – – – – 1-3/8 11.00 13.0 11.25
Semi-Machined D1 Backplates
TaperSize
Camlock StudsPart Number Retail Price Dia Thread
D1-3 7-899-103 21.48 9/16"M10 x 1
D1-4 7-899-104 22.77 5/8"D1-5 7-899-105 25.02 3/4" M16 x 1D1-6 7-899-106 28.92 7/8" M16 x 1.5D1-8 7-899-108 33.27 1" M20 x 1.5D1-11 7-899-111 45.84 1-3/16" M22 x 1.5D1-15 7-899-115 103.20 1-3/8" M24 x 1.5
Set Screw Numberof StudsPart Number Retail Price
7-899-305 12.51 3
7-899-310 12.51 6
Camlock Studs and Set Screws
• Sold by piece
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 382
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
383
PREC
ISION
SCR
OLL
CH
UC
KB
AC
KPLA
TES
Precision Backplates
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Semi-Machined and Fully-Machined Type A1/A2 Backplates• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks
ChuckDia
TaperSize
Fully MachinedPart Number *** Retail Price Wt
lbsSemi MachinedPart Number ** Retail Price Wt
lbs A B ThruHole C D E
6-1/4" A-5 – – – 7-873-065 156.75 6.5 6.40 1 3.13 4.125 3.25
8"A-5 7-873-0850* 197.58 18 7-873-085 184.56 19
7.991.50
2.174.125 3.25
A-6 – – – 7-873-086 184.80 15.5 1.30 5.25 4.19
10"A-6 – – – 7-873-106 239.82 38
9.961.30
3.175.25 4.19
A-8 – – – 7-873-108 255.54 33 1.70 6.75 5.50
12-1/2"A-6 – – – 7-873-126 318.57 45
12.521.30
4.065.25 4.19
A-8 – – – 7-873-128 337.32 62 1.70 6.75 5.50
15-3/4"A-8 7-873-168H 739.65 – 7-873-168 544.38 85
15.941.70
5.366.75 5.50
A-11 7-873-169H 739.65 51 7-873-169 549.63 141 2.95 9.25 7.75
20"A-11 – – – 7-873-209* 819.24 133
19.88 1.777.59
9.25 7.75A2-15 7-873-2095 1,444.71 71 – – – –
25"A-11 – – – 7-873-259* 1,218.09 158
25.001.77 7.59 9.25 7.75
A-15 7-873-2600 1,375.50 154 7-873-2595 1,340.64 2182.205
11.10 13.00 11.25A-20 – – – 7-873-2598* 1,445.61 156 16.00 18.25 16.25
32" A2-15 7-873-3215 1,325.82 – – 253 25.00 2.205 7.59 13.00 11.25
36" 40" 49"A2-15 – – – 7-873-3615* 1,780.83 242
21.852.78
7.4813.00 11.25
A2-20 – – – 7-873-3620* 1,825.74 249 3.15 18.25 16.25
40"A-15 7-873-4015 2,062.00 106 – – – 20.53 1.77 11.1 13 14.25A-20 7-873-4020 2,325.00 60 – – – 20.57 1.97 16 18.25 16.25A-28 7-873-4028 2,586.00 22.1 – – – 28.54 2.87 16 25.5 23
* A2 only
** Semi Machined backplates should be the first alternative for independent chucks
*** Fully Machined backplates supplied with spindle mounting bolts
Type 8212Type 8210
Semi-Machined – Type 8212Fully Machined – Type 8210
• Provided with spindle mounting bolts• See mounting instructions on page 385
NOTES: Backplates require some machining on the counterboreprojection, see page 385 for more information. The projectionon the backplate must be sized to fit each chuck
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 383
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision BackplatesPR
ECIS
ION
SCR
OLL
CH
UC
KB
AC
KPL
ATE
S
384 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 8250
ChuckDia
PartNumber Retail Price Taper
SizeThread
Dia A B C B1 Wtlbs
5" 7-879-051 149.46 L00 3-3/4"-6 4.92 2.13 2.2 0.71 10
6-1/4"7-879-061 162.96 L00 3-3/4"-6
6.322.13 2.2
0.71 137-879-062 162.96 L0 4-1/2"-6 2.52 2.6
8"
7-879-081 181.53 L00 3-3/4"-6
7.91
2.13 2.2
0.71 227-879-082 181.53 L0 4-1/2"-6 2.52 2.6
7-879-083 198.27 L1 6"-6 2.99 3.35
10"
7-879-101 229.65 L00 3-3/4"-6
9.88
2.13 2.20
0.83 337-879-102 229.65 L0 4-1/2"-6 2.52 2.60
7-879-103 233.55 L1 6"-6 2.99 3.35
7-879-104 261.72 L2 7-3/4"-5 3.50 4.29
12-1/2"
7-879-122 342.60 L0 4-1/2"-6
12.44
2.52 2.60
1.10 577-879-123 342.60 L1 6"-6 2.99 3.35
7-879-124 426.60 L2 7-3/4"-5 3.50 4.29
15-3/4"
7-879-162 522.21 L0 4-1/2"-6
15.83
2.52 2.60
1.10 957-879-163 533.07 L1 6"-6 2.99 3.35
7-879-164 544.68 L2 7-3/4"-5 3.50 4.29
7-879-165 578.67 L3 10-3/8"-4 4.02 5.43
20"7-879-204 1,050.18 L2 7-3/4"-5
19.763.50 4.29
1.14 1597-879-205 1,077.75 L3 10-3/8"-4 4.02 5.43
25"7-879-254 1,530.63 L2 7-3/4"-5
24.823.78 4.29
1.38 3977-879-255 1,569.12 L3 10-3/8"-4 4.02 5.43
Fully-Machined Type L Backplates
• For plain back, self-centering chucks• For direct mounting on type L spindle nose• See mounting instructions on page 385
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 384
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
385
PREC
ISION
BA
CK
PLATES
INSTA
LLATIO
N
Precision Backplates
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
WARNING: READ CARFULLY BEFORE MOUNTING BACKPLATES ONTO SPINDLES
Installation Instructions for Mounting Backplates onto SpindlesAll BISON-BIAL semi-machined and fully machined backplates will have the mounting dimensions for theirrespective spindles fully machined. The fully machined backplates are designed for scroll plain back chucks.They can be used on other styles/models, but the existing bolt hole patterns haveto be reviewed for mounting interference.
1. With an indicator check the spindle to see if there is any radial or axial runout.Refer to the chuck manual for spindle nose accuracy.
2. Wipe the protective factory grease off the backplate, then mount it to the respective spindlemaking sure that all fastening components are torqued appropriately.
3. When initially installing the bolts, leave finish tightening to a second pass, and make sure toalternate to the opposite bolt to evenly distribute pressure across the spindle’s taper. Using thedial indicator, recheck the radial and axial backplate runout. If there are major differences,loosen the backplate and refit it.
4. Once the backplate is in place, a technique used to further ensure a close tolerance to thechuck would be to blue the front face of the backplate and take a skim cut. In most casesthis is not required.
5. Next, measure the OD and depth of the counterbore on the backside of the chuck; these willbecome your working dimensions for final sizing. Depending on the size of the chuck, the ODshould be .001" to .005" less than the OD dimension and the length can be approximately .015"to .030" shorter. This minus tolerance will eliminate the possibility of the projection pressingagainst the back of the chuck, which can impact the scroll and create unnecessary friction withthe jaw teeth. This could make it difficult for the wrench to turn the pinions and in turn the jaws.Machine the backplate until a snug fit has been achieved; this may require removing the backplate.
Note: The purpose of this backplate projection to the chuck counterbore is to relievethe stress on the mounting bolts, and is a critical part of maintaining chuck concentricity.
6. The semi-machined backplates recommended for independent chucks do not have mountingholes, and will have to be machined to the chucks bolt hole pattern. Dimensions are availablein the Toolmex full-line catalog, or online at www.toolmex.com, or by calling a customer servicerepresentative at +1-800-992-4766 or +1-508-653-8897.
7. Bolt hole patterns may require removal of the backplate for machining. Once machined, followthe procedures from steps 2 and 3 before mounting.
8. Re-indicate the chuck for basic run out on the OD and Face.
9. Take a round piece of ground stock and enclose the jaws. Then, indicate the part for runout atthe jaws, ½ way across its length, and at the end. This will give you an idea of the parametersthat will have to be accounted for part production.
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 385
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Scroll Chuck JawsPR
ECIS
ION
SCR
OLL
CH
UC
KJA
WS
386 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Hard Master Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
ChuckDia
3-JawPart Number
4-JawPart Number
K H G F J S L D E B OALA
ThreadM
3-Jaw 4-Jawinches Wt of Set – lbs
5" 7-885-305 – 5/8 57/64.4996 5/16
.1575
.126
.4724.3150 .3150 .7874
2.1259 5/16-18 0.93 –6-1/4" 7-885-306 7-885-406 3/4 1-1/8
.55112.5590
3/8-161.20 1.60
8" 7-885-308 7-885-408 7/8 1-3/8 .3543 .3937 .9843 3.1740 2.10 2.8010" 7-885-310 7-885-410 1-1/16 1-9/16
.7496 1/2
.6299.4331
.47241.1024 3.6220
1/2-133.20 4.27
12-1/2" 7-885-312 7-885-412 1-1/4 1-7/8 .5000 1.2598 4.3307 5.10 6.8015-3/4" 7-885-316 7-885-416
1-1/2 2-1/4 .2835
.8661 .5906
.5512
1.4173 5.1181 5/8-11 7.30 –20" 7-885-320 7-885-420
1.2598.6299
1.5748 6.53513/4-10
14.4 –25" 7-885-325 7-885-425
1.9685 8.858327.1 –
32" 7-885-332 – – –40" 7-885-340 – 1.606 2.7559 12.913 M22 51.2 –
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price
5" 7-885-305 144.33 – –6-1/4" 7-885-306 154.47 7-885-406 222.728" 7-885-308 169.17 7-885-408 243.9310" 7-885-310 217.80 7-885-410 312.27
12-1/2" 7-885-312 299.22 7-885-412 433.7415-3/4" 7-885-316 397.56 7-885-416 587.7620" 7-885-320 726.69 7-885-420 995.0425" 7-885-325 859.29 7-885-425 1,318.3532" 7-885-332 1,080.00 – –40" 7-885-340 4,660.00 – –
5" to 10" Diameters
20" Diameter 25" to 32" Diameters12" and 16" Diameters
All solid jaws and masterjaws are manufactured to BISON-BIAL’s
rigid specifications
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 386
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
387
PREC
ISION
SCR
OLL
CH
UC
KJA
WS
Precision Scroll Chuck Jaws
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia M H G J K D E F N C B OAL
A O P3-Jaw 4-Jaw
Wt of Set - lbs5" 5/8 57/64
.4996.35 .59
.3129
.157
.1260
.315 1.516 .866 2.205 .57 1.38 0.93 –6-1/4" 3/4 1-1/8
.43 .71.335 1.634 .984 2.638 .71 1.63 1.20 1.60
8" 7/8 1-3/8 .374 1.713 1.063 3.174 .85 2.01 2.10 2.8010" 1-1/16 1-9/16
.7496
.55 .78
.5004
.472 2.023 1.280 3.740 .96 2.32 3.20 4.2712-1/2" 1-1/4 1-7/8 .512 2.165 1.457 4.331 1.04 2.68 5.10 6.8015-3/4"
1-1/22-1/4
.71 1.0
.2480
.532 2.539 1.6545.000
1.06 3.01 7.30 –20"
.87 1.3.689 2.933 1.654 1.97 3.46 14.40 –
25" & 32 .827 3.228 2.047 2.01 3.50 27.10 –40" 3-3/4 .9449 1.3779 1.102 3.819 2.952 6.890 1.89 4.88 36.37 –
ChuckDia
3-JawPart Number Retail Price
3-JawEnhanced Serration
Part NumberRetail Price 4-Jaw
Part Number Retail Price
5" 7-883-305 160.02 – – – –6-1/4" 7-883-306 196.29 – – 7-883-406 229.058" 7-883-308 212.94 – – 7-883-408 301.3810" 7-883-310 249.51 7-883-3100 333.60 7-883-410 342.18
12-1/2" 7-883-312 307.62 7-883-3120 413.70 7-883-412 421.2015-3/4" 7-883-316 417.69 7-883-3160 558.34 7-883-416 571.9220" 7-883-320 744.09 7-883-3200 1,108.10 7-883-420 1,031.61
25" & 32" 7-883-325 853.68 7-883-3250 1,174.21 7-883-425 1,152.2740" – – 7-883-3400 3,330.00 – –
Hard Top Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
Jaw Mounting BoltsSee page 374
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 387
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Scroll Chuck JawsPR
ECIS
ION
SCR
OLL
CH
UC
KJA
WS
388 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number
RetailPrice
4-JawPart Number
RetailPrice
C L B F E N P O Hard Solid JawsWt of Set - lbs
inches 3-Jaw 4-Jaw
4" 7-881-304 99.54 – – 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 –
5" 7-881-305 118.80 7-881-405 174.15 1.5748 2.0079 .7874 .3150.3150
.3150 1.319 .512 1.2 1.6
6-1/4" 7-881-306 136.53 7-881-406 199.65 2.0866 2.7559 .7874 .3150 .3937 1.772 .748 2.4 3.2
8" 7-881-308 145.50 7-881-408 206.70 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3
10" 7-881-310 180.54 7-881-410 253.83 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 5.2 7.0
12-1/2" 7-881-312 296.19 7-881-412 430.56 2.8740 4.9213 1.2598 .5000 .7087 3.268 1.358 8.7 12
15-3/4" 7-881-316 354.69 7-881-416 489.51 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 16 20.6
20" 7-881-320 806.58 7-881-420 1,057.17 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 22 30.3
25" 7-881-325 1,011.57 7-881-425 1,238.46 4.3307 8.8583 1.9685 1.1024 5.866 2.598 38 54.5
ID Hard Solid Jaws for 3 and 4-Jaw Steel Scroll Chucks• Sold in sets
ChuckDia
3-JawPart Number
RetailPrice
4-JawPart Number
RetailPrice
C L B F E N P O Hard Solid JawsWt of Set - lbs
inches 3-Jaw 4-Jaw
4" 7-880-304 109.86 – – 1.2598 1.6535 .5906 .2362 .2362 .2756 1.063 .433 .58 –
5" 7-880-305 118.80 7-880-405 174.15 1.5748 2.0079 .7874 .3150 .3150 .3150 1.319 .512 1.2 1.6
6-1/4" 7-880-306 136.53 7-880-406 119.65 2.0866 2.7559 .7874 .3937 1.772 .748 2.4 3.2 2.4 3.2
8" 7-880-308 145.50 7-880-408 206.70 2.1260 3.3465 .9843 .3543 .3937 .4724 2.244 .906 3.2 4.3
10" 7-880-310 180.24 7-880-410 253.83 2.4803 4.1339 1.1024 .4331 .4724 .5512 2.736 1.102 3.2 7.0
12-1/2" 7-880-312 296.19 7-880-412 430.56 2.8740 4.9213 1.2598 .5000 .7087 3.268 1.358 8.7 5.2 12
15-3/4" 7-880-316 354.69 7-880-416 489.51 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 12 20.6
20" 7-880-320 467.13 7-880-420 1,057.17 3.9370 7.0866 1.57486299
1.0236 4.705 1.969 16 30.3
25" 7-880-325 1,011.57 7-880-425 1,248.36 4.3307 8.8583 1.9685 1.1024 5.866 2.598 22 54.5
OD Hard Solid Jaws for 3 and 4-Jaw Steel Scroll Chucks• Sold in sets
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 388
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
389
PREC
ISION
SCR
OLL
CH
UC
KJA
WS
Precision Scroll Chucks Jaws
Quality Products • Partnership • Industry Experts PRECISION SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price C L B F E NSoft Solid JawsWt of Set - lbs
3-Jaw 4-Jaw
4" 7-882-304 75.09 – – 1.2598 1.6535 .5906 .2362 .2362 .2756 .86 –
5" 7-882-305 79.11 7-882-405 117.30 1.5748 2.0079.7874 .3150 .3150
.3150 1.7 1.7
6-1/4" 7-882-306 91.47 7-882-406 134.31 2.0866 2.7559 .3937 3.3 4.4
8" 7-882-308 105.18 7-882-408 151.74 2.1260 3.3465 .9843 .3543 .3937 .4724 5.3 7.1
10" 7-882-310 132.99 7-882-410 195.12 2.4803 4.1339 1.1024 .4331.4724
.5512 9.0 12
12-1/2" 7-882-312 212.07 7-882-412 329.70 2.8740 4.9213 1.2598 .5000 .7087 13 17
15-3/4" 7-882-316 230.55 7-882-416 416.67 3.6220 5.7087 1.4173 .5906
.5512
.8661 16 20.6
20" 7-882-320 500.43 7-882-420 742.68 3.9370 7.0866 1.5748.6299
1.0236 33 30.3
25" 7-882-325 609.48 7-882-425 959.76 4.3307 8.8583 1.9685 1.1024 57 54.5
Soft Solid Jaws for 3 and4-Jaw Steel Scroll Chucks• Sold in sets
ChuckDia Part Number Retail Price A B C D E F G H I J
BoltSizeM
Wtper Pc
lbs
5" 7-884-305 16.00 2.520 0.866 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
5/16-18 .66
6-1/4" 7-884-306 18.90 3.071 1.000 1.634 0.8386 1-1/2 1.3393/8-16
1.01
8" 7-884-308 21.40 3.543 1.063 1.713 0.9488 1-3/4 1.575 1.43
10" 7-884-310 31.10 4.173 1.280 2.028
.5000
1.0827 2-3/16
.750
1.7721/2-13
2.54
12-1/2" 7-884-312 42.10 4.724 1.457 2.165 1.2087 2-1/2 2.087
.2480
3.53
15-3/4" 7-884-316 54.40 5.512 1.654 2.539 1.3443
32.480 .406
5/8-11 4.85
20" 7-884-320 115.78 5.512 1.654 2.9331.3543 3/4-10
5.29
25" & 32" 7-884-325 165.63 6.299 2.047 3.288 9.26
40" 7-884-340 495.00 7.52 2.953 3.819 2.26 4.134 .59 M22 22.04
Soft Top Jaws for 3 and 4-Jaw Steel Scroll Chucks• American Standard Tongue and Groove Jaws• Sold by piece
Enhanced Serration Jaws for Universal and Precision Scroll Chucks• Jaw gripping surfaces serration 1/8"• Sold in sets• Jaws are recommended for heavymachining applications
Chuck Dia Part Number Retail Price
10" 7-883-3100 333.60
12-1/2" 7-883-3120 413.70
15-3/4" 7-883-3160 558.34
20" 7-883-3200 1,108.10
25"7-883-3250 1,174.21
32"
40" 7-883-3400 3,330.00
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 389
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Precision Spare PartsPR
ECIS
ION
SCR
OLL
CH
UC
KSP
AR
EPA
RTS
390 PRECISION SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Pinion
Part Number Retail Price D H Wt lbs
7-886-304 30.87 0.98 1.4 0.12
7-886-505 36.90 0.98 1.44 0.13
7-886-506 40.50 1.1 1.57 0.18
7-886-508 47.82 1.2 1.99 0.37
7-886-510 57.63 1.4 2.36 0.44
7-886-512 71.16 1.5 2.85 0.71
7-886-516 94.80 1.7 3.66 1.3
7-886-520 266.22
2
4.45 2.1
7-886-525 319.77 5.24 2.5
7-886-332 471.26 6.71 3.0
7-886-340 789.00 9.87 3.8
ChuckDia
Scroll
Part Number Retail Price D H Wt lbs
4" 7-887-304 106.44 2.74 0.49 0.34
5" 7-887-505 155.46 3.7 0.63 0.84
6-1/4" 7-887-506 184.50 4.88 0.83 2.03
8" 7-887-508 227.43 6.24 0.94 3.62
10" 7-887-510 307.08 7.82 1.1 4.54
12-1/2" 7-887-512 407.28 10.1 1.2 10.2
15-3/4" 7-887-516 978.21 12.9 1.3 22.7
20" 7-887-520 2,244.42 16.4 1.2 36.4
25" 7-887-525 3050.79 21.3 1.6 66.0
32" 7-887-332 2,110.46 27.36 1.77 148.0
40" 7-887-340 10,760.00 35.04 1.77 193.0
Spare Parts for 3, and 4-Jaw Chucks with Forged Steel Body
* Pinion screw
D = OD DiameterH = HeightL = OAL
ChuckDia
Pinion Sleeve
Part Number Retail Price ID
4" – – –
5" 7-888-505 12.20 0.98
6-1/4" 7-888-506 17.70 1.1
8" 7-888-508 19.20 1.2
10" 7-888-510 27.09 1.4
12-1/2" 7-888-512 29.16 1.5
15-3/4" 7-888-516 46.92 1.7
20" 7-888-520 54.212
25" 7-888-525 66.45
32" – – –
40" – – –
Half Ring
Part Number Retail Price D
7-888-904* 3.33 –
7-888-705 4.71 1.52
7-888-706 6.18 1.72
7-888-708 6.96 1.85
7-888-710 8.40 1.94
7-888-712 10.35 2.17
7-888-716 14.04 2.42
7-888-720 12.39 2.76
7-888-725 18.48 2.95
7-888-920* 7.86 –
Extended and Standard Length Wrenches*Chuck
DiaSquare
SizeExtended Length
Part Number Retail Price L
4".3543
– – –
5" – – –
6-1/4".4331 7-889-008L 56.00
8.58"
10".5512 7-889-012L 65.31
12-1/2"
15-3/4" .6693 – – –
20"
.7480 – – –25"
32"
40"
* Wrenches are spring loadedfor the operator’s safetyRemoval of the spring is notrecommended and may voidchuck warranty
Standard Length
Part Number Retail Price L
7-889-005 32.52 3.15
7-889-008 34.59 3.94
7-889-012 43.50 4.72
7-889-016 61.50
5.517-889-025 94.14
7-889-032 119.55
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 390
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
391
UN
IVER
SAL
SCR
OLL
CH
UC
KS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
2, 3, and 4-Jaw Universal Self-Centering Scroll Chucks• These chucks can be used on all types of lathes, and on different kinds of milling,drilling, and CNC attachments
• Chucks come with either American Standard two-piece tongue and groove jaws,or two sets of hard solid jaws, one OD and one ID
• Plain Back and Direct Mount• Semi-Steel body• Chuck body is made of high quality Cast IronAll guideways and bearing surfaces are precisely machined
• Scroll plate is drop forged of fine Alloy Steel, and carefully case hardened• Thread flanks are ground on both sides• The jaw’s teeth and guideways are hardened and fully ground on both sides• Pinions are hardened and ground
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-3...4. Pinion 7-886-3...5. Pinion Screw 7-888-9...6. Hard Master Jaws 7-885-3...7. Hard Top Jaws 7-883-3...8. Grease Nipple9. Chuck Mounting Bolts 7-897-...10. Back Cover Mounting Bolts11. ChuckWrench 7-889-0...12 and 13. Jaw Mounting Bolts 7-897-5...
1. Chuck Body2. Back Cover3. Scroll Plate 7-887-3...4. Pinion 7-886-3...5. Pinion Screw 7-888-9...6. Hard Solid ID Jaws 7-881-...7. Hard Solid OD Jaws 7-880-...8. Grease Nipple9. Chuck Mounting Bolts 7-897-...10. Back Cover Mounting Bolts11. ChuckWrench 7-889-0...
32" Diameter ChuckSee page 410
Chucks with Two-PieceReversible Jaws
Chucks with Two Sets ofHard Solid Jaws, OD and ID
Backplates: pages 399-404Jaws: pages 405-409Spare Parts: pages 407, 409
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 391
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal Scroll ChucksU
NIV
ERSA
LSC
RO
LLC
HU
CK
S
392 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench
• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4" and larger
2, 3, and 4-Jaw Universal Self-Centering Scroll Chucks• Semi-Steel body• 3 Pinion design• Plain back chucks• Backplates required
Front View
Back View
ChuckDia
PartNumber Retail Price Hole
DiaMax Hole
EnlargementRPMmax
Wtlbs
5" 7-800-0500 426.09 1.2598 1.2598 3200 11
6-1/4" 7-800-0600 466.89 1.6535 1.8110 3000 22
8" 7-800-0800 551.37 2.1653 2.5591 2500 39
10" 7-800-1000 760.62 2.9921 3.4646 2000 55
12-1/2" 7-800-1200 1,122.15 4.0551 4.3307 1500 110
15-3/4" 7-800-1600 1,885.56 5.3543 5.5906 1000 187
20" 7-800-2000 4,670.79 7.4803 8.2283 700 320
25" 7-800-2500 7,161.63 9.9213 11.9291 500 551
32" 7-800-3200 13,778.43 10.5120 12.7953 300 886
Type 3205
3-Jaw Scroll Chucks with Hard Solid Jaws
ChuckDia
PartNumber Retail Price Hole
DiaMax Hole
EnlargementRPMmax
Wtlbs
3-1/4" 7-810-0300 311.28 .6299 .6299 4000 3.3
4" 7-810-0400 328.17 .7874 .7874 3500 6.17
5" 7-810-0500 363.57 1.2598 1.2598 3200 11
6-1/4" 7-810-0600 395.52 1.6535 1.8110 3000 22
8" 7-810-0800 476.52 2.1653 2.5591 2500 39
10" 7-810-1000 648.72 2.9921 3.4646 2000 55
12-1/2" 7-810-1200 978.03 4.0551 4.3307 1500 110
15-3/4" 7-810-1600 1,783.05 5.3543 5.5906 1000 187
20" 7-810-2000 4,387.02 7.4803 8.2283 700 320
25" 7-810-2500 6,704.28 9.9213 11.9291 500 551
Chucks are provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench
• 1 Set of mounting bolts• 2 Hex keys• Eye bolts for chuck sizes 15-3/4" and larger
Type 3204
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 392
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
393
UN
IVER
SAL
SCR
OLL
CH
UC
KS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
2-Jaw Scroll Chucks with Soft Top Reversible Jaws2 Pinion design
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of soft top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Semi-Steel body• Eye bolts for chuck size 15-3/4"
ChuckDia
PartNumber Retail Price Hole
DiaMax Hole
EnlargementRPM*max
Wtlbs
6-1/4" 7-830-0600 514.98 1.6535 1.8110 3000 22
8" 7-830-0800 534.48 2.1654 2.5591 2500 39
10" 7-830-1000 553.92 2.9921 3.4646 2000 55
12-1/2" 7-830-1200 1,040.49 4.0551 4.3307 1500 110
15-3/4" 7-830-1600 1,654.92 5.3543 5.5906 1000 187
2, 3 and 4-Jaw Universal Self-Centering Scroll Chucks• Semi-Steel body• Plain back chucks• Backplates required
4-Jaw Scroll Chucks with Hard Solid Jaws3 Pinion design
ChuckDia
PartNumber Retail Price Hole
DiaMax Hole
EnlargementRPMmax
Wtlbs
5" 7-840-0500 502.17 1.2598 1.2598 3200 11
6-1/4" 7-840-0600 540.33 1.6535 1.8110 3000 22
8" 7-840-0800 662.34 2.1654 2.5591 2500 39
10" 7-840-1000 878.70 2.9921 3.4646 2000 55
12-1/2" 7-840-1200 1,334.82 4.0551 4.3307 1500 110
15-3/4" 7-840-1600 2,187.96 5.3543 5.5906 1000 187
20" 7-840-2000 5,394.99 7.480 8.2283 700 320
25" 7-840-2500 7,641.27 9.921 11.9291 500 551
ChuckDia
PartNumber Retail Price Hole
DiaMax Hole
EnlargementRPMmax
Wtlbs
5” 7-845-0500 426.81 1.2598 1.2598 3200 11
6-1/4” 7-845-0600 464.10 1.6535 1.8110 3000 22
8” 7-845-0800 552.00 2.1654 2.5591 2500 39
10” 7-845-1000 736.92 2.9921 3.4646 2000 55
12-1/2” 7-845-1200 1,120.17 4.0551 4.3307 1500 110
15-3/4" 7-845-1600 2,052.21 5.3543 5.5906 1000 187
Chucks are provided with:
• 1 Set of hard master jaws• 1 Set of hard top reversible jaws• 1 Chuck wrench• 1 Set of mounting bolts• 2 Hex keys• Semi-Steel body• Eye bolts for chuck sizes 15-3/4"and larger
Chucks are provided with:
• 1 Set of hard solid ID jaws• 1 Set of hard solid OD jaws• 1 Chuck wrench• 1 Set of mounting bolts• 1 Hex key• Semi-Steel body• Eye bolts for chuck sizes 15-3/4"and larger
*RPM max is rated for round workpiece ONLY
4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws3 Pinion design
Type 3105
Type 3605
Type 3604
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 393
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal Scroll ChucksU
NIV
ERSA
LSC
RO
LLC
HU
CK
S
394 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
F E d C H h h1
3-1/4" 2.6378 2.2047 0.6299 0.1181 1.732 – 0.512
4" 3.2677 2.7559 0.7874 0.1181 1.969 – 0.669
5" 4.252 3.7402 1.2598 0.1575 2.205 1.575 0.787
6-1/4" 5.5118 4.9213 1.6535 0.1575 2.539 1.693 1.26
8" 6.9291 6.2992 2.1654 0.1575 2.953 1.772 1.142
10" 8.8189 7.874 2.9921 0.1969 3.347 2.087 1.339
12-1/2" 11.2598 10.2362 4.0551 0.1969 3.701 2.244 1.693
15-3/4" 14.2519 12.9921 5.3543 0.1969 4.134 2.639 2.165
20" 18.0314 16.5354 7.4803 0.1969 4.724 3.15 2.362
25" 23.0709 21.4567 9.9212 0.2756 5.315 3.425 2.756
32" see page 410
ChuckDiaD
Backplate Mounting Bolts
PartNumber Retail Price Thread
M L Number ofBolts
3-1/4" 7-897-103 8.83 M6 x 1
0.98
34"7-897-105 8.99 M8 x 1.25
5"
6-1/4"7-897-108 9.18 M10 x 1.5
6
8"
10" 7-897-110 10.08 M12 x 1.751.18
12-1/2" 7-897-112 10.98
M16 x 215-3/4"
7-897-125 10.98 1.5720"
25"
32" 7-897-132 17.25 see page 410
Principal Dimensions for 2-Jaw Chucks – Back Mounting
Principal Dimensions for 3 and 4-Jaw Chucks – Back Mounting
ChuckDiaD
F E d C HTop Jaws
h Width
6-1/4" 5.5118 4.9213 1.6535 .1575 2.756 1.697 1.575
8" 6.9291 6.2992 2.1654 .1575 3.150 1.776 1.575
10" 8.8189 7.8740 2.9921 .1969 3.543 2.071 1.850
12-1/2" 11.2598 10.2362 4.0551 .1969 3.937 2.240 2.047
15-3/4" 14.2519 12.9921 5.3543 .1969 4.331 2.598 2.047
ChuckDiaD
Backplate Mounting Bolts
PartNumber Retail Price Thread
MNumber of
Bolts
6-1/4"7-897-108 9.18 M10 x 1.5
6
8"
10" 7-897-110 10.08 M12 x 1.75
12-1/2" 7-897-112 10.98M16 x 2
15-3/4" 7-897-125 10.98
see page 355 for clamping ranges for 3 and 4-Jaw BISON-BIAL chucks
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:28 PM Page 394
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
395
UN
IVER
SAL
SCR
OLL
CH
UC
KS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw, Type A1 and A2, Direct Mount Chuckswith Two Piece Hard Reversible Jaws• Semi-Steel body• Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper. Either an A1 or A2chuck will fit
• Type A2 spindle has a 1 bolt pattern outside the taper. Only an A2 chuck will fit
ChuckDia D
PartNumber Retail Price Taper
SizeHole
Dia dMax Hole
EnlargementRPMmax
Wtlbs
B(A2)
B1(A1) G C/C1 H h
6-1/4'' 7-801-0615 726.03 A1-5 1.6535 1.8110 3000 22 – 2.4374 3.2505 0.563 3.2087 1.693
8''7-801-0815 806.70 A1-5 1.6535
2.5591 2500 42– 2.4374 3.2505 0.563
3.5827 1.7727-801-0816 805.23 A1-6 2.1653 – 3.2500 4.188 0.625
10''
7-801-1015 1,092.60 A2-5 2.9921 2.9921
2000 71
4.1260 – 3.2505 0.563
4.0748 2.0877-801-1016 1,097.55 A1-6 2.16353.4646
– 3.2500 4.188 0.625
7-801-1018 1,106.31 A1-8 2.9921 – 4.3750 5.5007 0.688
12-1/2''7-801-1216 1,561.17 A2-6 4.0551 4.0551
1500 1215.2520 – 4.188 0.63
4.6338 2.2447-801-1218 1,568.16 A1-8 3.1496 4.3307 – 4.3750 5.5007 0.688
15-3/4''
7-801-1616 2,612.22 A2-6 4.0551 4.0551
1000 203
5.2520 – 4.188 0.63
5.0591 2.6397-801-1618 2,648.97 A2-8 5.3543 5.3543 6.7480 – 5.5007 0.709
7-801-1619 2,617.47 A1-11 5.1181 5.5906 – 6.5000 7.7507 0.75
20'' 7-801-2029 6,271.80 A2-11 7.5905 7.5905 700 353 9.2520 – 7.7507 0.787 5.748 3.091
25''7-801-2511 9,530.64 A2-11 7.49 –
500 6289.2520 – 7.7507 0.75
6.496 3.4257-801-2515 9,530.64 A2-15 7.874 11.063 13.000 – 11.251 0.813
32'' 7-801-3220 15,602.10 A2-20 12.598 12.598 300 847 18.25 – 16.252 0.8661 7.0866 3.425
ChuckDiaD
Chuck Mounting Bolts
Part Number Retail Price Thread L Number of Bolts
6-1/4'' 7-897-521 5.60 7/16-14 2-3/4
38''
7-897-522 5.60 7/16-143-1/8
7-897-533 5.60 1/2-13
10''
7-897-524 5.60 7/16-14 4-1/8
6
7-897-534 5.60 1/2-13 3-1/2
7-897-545 6.81 5/8-11 3-1/2
12-1/2''7-897-537 11.14 1/2-13 4-3/4
7-897-548 7.94 5/8-11 4-1/4
15-3/4''7-897-538 8.01 1/2-13 5
7-897-564 11.05 3/4-10 4-1/4
20'' 7-897-567 14.83 3/4-10 6
25''7-897-569 16.86 3/4-10 7
7-897-574 20.03 7/8-9 6
32'' 7-897-584 20.16 1-8 6
Type A
L
Type 3215
Type A1 MountBolt Hole Pattern
Type A2 MountBolt Hole Pattern
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 395
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal Scroll ChucksU
NIV
ERSA
LSC
RO
LLC
HU
CK
S
396 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
PartNumber Retail Price Taper
Size
HoleDiad
Max HoleEnlargement
RPMmax
Wtlbs B G C H h
Camlock Studs
Dia Thread Numberof Studs
5" 7-803-0534 662.70 D1-4 1.2598 1.2598 3200 11 3.2520 2.5005 .5118 2.7559 1.575 5/8 M10 x 1
36-1/4"
7-803-0633 705.87 D1-31.6535 1.9685 3000 20
2.7795 2.1250.5118 3.2087 1.693
9/16M10 x 1
7-803-0634 705.87 D1-4 3.2520 2.5005 5/8
8"
7-803-0833 851.28 D1-3 2.0275 2.0275
2500 42
2.7795 2.1250.5118
3.5827 1.772
9/16 M10 x 1
7-803-0834 851.28 D1-4
2.1653
2.3622 3.2520 2.5005 5/8 M10 x 1
7-803-0835 851.28 D1-52.5591
4.1260 3.2505.5629
3/4 M12 x 1
6
7-803-0836 851.28 D1-6 5.2520 4.1880 7/8 M16 x 1.5
10"
7-803-1035 1,150.89 D1-5
2.9921
2.9921
2000 71
4.1260 3.2505 .5629
4.0748 2.087
3/4 M12 x 1
7-803-1036 1,150.89 D1-63.4646
5.2520 4.1880 .6299 7/8 M16 x 1.5
7-803-1038 1,151.16 D1-8 6.7480 5.5007 .7087 1 M20 x 1.5
12-1/2"
7-803-1236 1,693.17 D1-6
4.0551
4.0551
1500 112
5.2520 4.1880 .6299 4.6338
2.244
7/8 M16 x 1.5
7-803-1238 1,693.17 D1-84.3307
6.7480 5.5007 .7087 4.6338 1 M20 x 1.5
7-803-1239 1,693.17 D1-11 9.2520 7.7507 .7874 5.5118 1-3/16 M22 x 1.5
15-3/4"
7-803-1636 2,880.87 D1-6 4.0551 4.0551
1000 223
5.2520 4.1880 .6299
5.0591 2.639
7/8 M16 x 1.5
7-803-1638 2,850.54 D1-85.3543
5.3543 6.7480 5.5007 .7087 1 M20 x 1.5
7-803-1639 2,876.79 D1-11 5.5906 9.2520 7.7507 .7874 1-3/16 M22 x 1.5
20"7-803-2038 6,406.83 D1-8 5.3543 5.3543
700 3316.7480 5.5007 .7087
5.7480 3.1501 M20 x 1.5
7-803-2039 6,406.83 D1-11 7.5984 7.5984 9.2520 7.7507 .7874 1-3/16 M22 x 1.5
25" 7-803-2539 8,866.83 D1-11 7.5984 11.9291 500 604 9.2520 7.7507 .7874 6.4960 3.425 1-3/16 M22 x 1.5
3-Jaw, Camlock Type D1, Direct Mount Chuckswith Two-Piece Jaws• Semi-Steel body
Type D
Type 3245
TaperSize
Camlock Studs
Part Number Retail Price Diameter Thread
D1-3 7-899-103 21.48 9/16"M10 x 1
D1-4 7-899-104 22.77 5/8"
D1-5 7-899-105 25.02 3/4" M12 x 1
D1-6 7-899-106 28.92 7/8" M16 x 1.5
D1-8 7-899-108 33.27 1" M20 x 1.5
D1-11 7-899-111 45.84 1-3/16" M22 x 1.5
D1-15 7-899-115 103.20 1-3/8" M24 x 1.5
Set Screw Numberof StudsPart Number Retail Price
7-899-305 12.513
67-899-310 12.51
Camlock Studs and Set Screws• Sold by piece
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 396
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
397
UN
IVER
SAL
SCR
OLL
CH
UC
KS
Universal Scroll Chucks
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw, Type L, Direct Mount Chucks with Two-Piece Jaws
• Semi-Steel body
ChuckDiaD
PartNumber Retail Price Taper
Size
HoleDiad
Max HoleEnlargement
RPMmax
ThreadT G J C H h Wt
lbs
6-1/4"7-804-0641 700.77 L00
1.6535 1.8110 30003-3/4 - 6 2-3/4 .5512 2.1260 4.0551
1.693 237-804-0642 706.89 L0 4-1/2 - 6 3-1/4 .5906 2.5197 4.4488
8"
7-804-0841 794.34 L00
2.1654
2.50
2500
3-3/4 - 6 2-3/4 .5512 2.1260 4.3701
1.772 427-804-0842 794.34 L02.5591
4-1/2 - 6 3-1/4 .5906 2.5197 4.7638
7-804-0843 794.34 L1 6 - 6 4-1/8 .6299 2.9921 5.2362
10"
7-804-1042 1,103.46 L0
2.9921
2.9921
2000
4-1/2 - 6 3-1/4 .5906 2.5197 5.0394
2.087 647-804-1043 1,103.46 L13.4646
6 - 6 4-1/8 .6299 2.9921 5.5118
7-804-1044 1,125.03 L2 7-3/4 - 5 5-1/4 .8661 3.5039 6.0236
12-1/2"
7-804-1242 1,558.83 L0
4.05514.0551
1500
4-1/2 - 6 3-1/4 .5906 2.5197 5.3937
2.244 1347-804-1243 1,548.33 L1 6 - 6 4-1/8 .6299 2.9921 5.8661
7-804-1244 1,548.33 L2 4.3307 7-3/4 - 5 5-1/4 .8661 3.5039 6.3780
15-3/4"7-804-1643 2,488.38 L1
4.0551 4.0551 10006 - 6 4-1/8 .6299 2.9921 6.1811
2.639 2517-804-1644 2,556.63 L2 7-3/4 - 5 5-1/4 .8661 3.5039 6.6929
Type L
Type 3255
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 397
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal Scroll ChucksU
NIV
ERSA
LSC
RO
LLC
HU
CK
S
398 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw, Threaded, Direct Mount Chucks• Semi-Steel body
Diameter: 4" Only Diameters: 5" thru 12.5"
ChuckDiaD
ThreadT
PartNumber Retail Price
HoleDiad
RPMmax* G k H h h1 Wt
lbs
4"1 - 10 7-805-0451 428.82
.7874 35001.0150
1/2 3.543 –.669
8.81-1/2 - 8 7-805-0452 433.47 1.5150 –
5"1 - 10 7-805-0551 545.25
1.2598 32001.0150
1/23.740
1.575–
121-1/2 - 8 7-805-0552 545.25 1.5150 3.740 –
6-1/4"1-1/2 - 8 7-805-0652 615.78
1.5748 30001.5150 1/2 4.134
1.693–
232-1/4 - 8 7-805-0653 601.20 2.2600 5/8 4.331 –
8"
1-1/2 - 8 7-805-0852 745.92
2.1653 2500
1.5150 1/2 4.528
1.772
–
452-1/4 - 8 7-805-0853 747.66 2.2600 5/8 4.724 –
2-3/8 - 6 7-805-0854 739.20 2.3850 3/4 4.922 –
10" 2-1/4 - 8 7-805-1053 1,032.72 2.9921 2000 2.2600 5/8 5.512 2.087 – 75
NOTES: Prior to ordering a threaded mount chuck, please check the spindle nosediameter "G" and dimension "k". Depending on the lathe manufacturer,these dimensions may vary slightly from those specified in the table
Metric threads are often confused with traditional threads;please use thread pitch gage to confirm exact pitch prior to ordering
See page 352 for spindle dimensions
Threaded
Type 3285 / 3284
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 398
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
399
UN
IVER
SAL
SCR
OLL
CH
UC
KB
AC
KPLA
TES
Universal Backplates
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia A = F D D1 D3 D2 E (H7) Dx (k5) S* Sx** C
3-1/4" 2.6378 3.1496 3.1693 0.0252 2.2835 2.2047 2.20470.0787 0.0984 0.1181
4" 3.2677 3.3970 3.95670.3307
2.8346 2.7559 2.7559
5" 4.2520 4.9213 4.9409 3.8189 3.7402 3.7402
0.1181 0.1378 0.15756-1/4" 5.5118 6.2992 6.3189 0.4134 5.0000 4.9213 4.9213
8" 6.9291 7.8740 7.9134 0.5118 6.3780 6.2992 6.2992
10" 8.8189 9.8425 9.8819
0.6693
7.9528 7.8740 7.8740
0.1575 0.1772 0.196912-1/2" 11.2598 12.4016 12.4409 10.3150 10.2362 10.2362
15-3/4" 14.2520 15.7480 15.8268 13.1102 12.9221 12.9221
20" 18.0315 19.6850 19.7638 16.6535 16.5354 16.5354
25" 23.0709 24.8031 24.9213 21.5748 21.4567 21.4567 0.2362 0.2559 0.2756
32" 14.5000 – – – 17.7170 17.7170 – – – 0.7874
Rough Backplates for Scroll Chucks with Threaded Spindles
ChuckDia
PartNumber Retail Price D d D1 K L Wt
lbs
3"
7-870-105 93.27 5.20 .713.46 .98 2.20
4.44"
5"
6-1/4" 7-870-106 103.44 6.70.98
12
8" 7-870-108 120.60 8.30 4.02 1.18 2.83 22
10" 7-870-110 161.67 10.24 1.57 4.53 1.26 3.54 34
12-1/2" 7-870-112 231.57 12.30 1.97 6.77 1.26 4.02 66
15-3/4" 7-870-116 464.49 16.34 2.76 9.06 2.17 4.92 154
Principal Mounting Dimensions for Toolmex Backplates
Type 8205
• After selecting a suitable backplatefor the lathe, mount it onto the spindlenose of the lathe
• Proper mounting is very important inorder to secure concentricity betweenthe lathe’s spindle and the chuck
• The back of the lathe chuck has acounterbore diameter, E, finished inH7 class, with depth, C
• Prior to maching the backplate,accurately measure the chuck’scounterbore diameter, E, and depth, C
• A good press fit, H6/k5, is most desirable• To ensure satisfactory concentricity,it is important that this procedure isdone accurately
* S = length of the boss of the supplied backplate** Sx = length of the boss after machining
See full back plate machininginstructions on page 385
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 399
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal BackplatesU
NIV
ERSA
LSC
RO
LLC
HU
CK
BA
CK
PLA
TES
400 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Semi-Finished Threaded Backplates for Threaded Spindles
Mounting Instructions: see page 385
ChuckDia
ThreadM
PartNumber Retail Price A B C D h E Wt
lbs
4"1-10 7-871-041 101.10
1.5352.165 1.01500
4.095 .709 .5000 81-1/2-8 7-871-042 101.10 2.677 1.51421
5"1-10 7-871-051 103.95
1.5352.165 1.01500
5.079 .709 .5000 101-1/2-8 7-871-052 103.95 2.677 1.51421
6-1/4"1-1/2-8 7-871-062 115.11 1.535
3.1891.51421
6.535 .787.5000
122-1/4-8 7-871-063 115.11 1.791 2.26000 .6260
8"
1-1/2-8 7-871-082 132.81 1.535
3.583
1.51421
8.110 .866
.5000 12
2-1/4-8 7-871-083 132.81 1.791 2.26000 .6260 13
2-3/8-6 7-871-084 132.81 2.047 2.28500 .7480 15
10"2-1/4-8 7-871-103 199.50 1.791
4.1732.26000
10.079 .984.6260 22
2-3/8-6 7-871-104 199.50 2.047 2.38500 .7480 25
12-1/2"2-3/8-6 7-871-124 264.93
2.047 4.3312.38500
12.638 1.102 .7480 332-3/4-8 7-871-125 189.96 2.76000
Type 8206
Fully Machined Threaded Backplates for BISON-BIALPlain Back Self-Centering Chucks
NOTE: Part number series 7-922-backplates require some machining on the counterboreprojection, see page 385 for more information
ChuckDia
ThreadD
PartNumber Retail Price A C B B1 E Wt
lbs
4"
1 - 10 7-922-043 110.46
3.941.97
1.50 .551
.5000
51-1/8 - 12W 7-922-045 110.46 .5630
1-1/2 - 8 7-922-046 80.70 2.36 .5000
5"M39 x 4 7-922-051 119.74
4.923.00 2.00 .75
.6260 112-3/16 - 10 7-922-053 117.31 3.11 1.61 .689
6-1/4" 2-3/16 - 10 7-922-063 129.15 6.3 3.11 1.61 .768 .6260 13
Type 8204
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 400
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
401
UN
IVER
SAL
SCR
OLL
CH
UC
KB
AC
KPLA
TES
Universal Backplates
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
TaperSize
Fully Machined Backplates*** Semi-Machined Backplates**StudDia
Numberof
Studs
HoleDiaC
D GPartNumber Retail Price Dia
A B B1 Wtlbs
PartNumber Retail Price Dia
AFlange
ThicknessWtlbs
4" D1-4 7-878-044 136.41 5.97 1.02 .87 3.65 – – – – – 5/83
2.40 3.25 2.50
5"
D1-3 7-878-053 175.264.94 1.02
.575.3
7-878-0530 164.34
5.00 1.02 8.0
9/16 2.02 2.78 2.13D1-4 7-878-054 175.26 .87 7-878-0540 164.34 5/8 2.40 3.25 2.50
D1-5 7-878-055 175.26 5.75 1.30 1.18 6.7 – – 3/46
3.13 4.13 3.25
D1-5 7-878-056 172.62 7.12 1.61 1.43 11.5 – – 7/8 2.16 5.25 4.19
6-1/4"
D1-3 7-878-063 202.92
6.321.06 .71
9.5
7-878-0630 190.236.38
1.029.3
9/16 2.02 2.78 2.13D1-4 7-878-064 207.36 7-878-0640 222.60
1.145/8 2.40 3.25 2.50
D1-5 7-878-065 207.36 1.18 1.0 7-878-0650 222.60 3/46
3.13 4.13 3.25D1-6 7-878-066 207.36 1.44 1.32 – – – – – 7/8 4.06 5.25 4.19
8"
D1-3 7-878-083 235.02
7.891.06
.7115.4
– – – – –27 9/163
2.02 2.78 2.13D1-4 7-878-084 236.46 7-878-0840 290.61 8.00 1.73 27 5/8 2.40 3.25 2.50D1-5 7-878-085 236.46 1.18 – – – – 3/4
6
3.13 4.13 3.25D1-6 7-878-086 239.64 1.44 1.26 7-878-0860 290.70 8.00 1.38 27 7/8 4.06 5.25 4.19
10"D1-5 7-878-105 296.97
9.861.18
.8724.3 – – – – – 3/4 3.13 4.13 3.25
D1-6 7-878-106 296.97 1.44 24.3 7-878-1060 341.769.96 1.93 35
7/8 4.06 5.25 4.19D1-8 7-878-108 306.54 1.54 1.36 39.7 7-878-1080 347.13 1 5.35 6.75 5.50
12-1/2"D1-6 7-878-126 392.46
12.421.56
.9439.7
7-878-1260 438.6612.52
2.7649
7/8 4.06 5.25 4.19D1-8 7-878-128 407.76 1.65 7-878-1280 470.19
2.171 5.35 6.75 5.50
D1-11 7-878-129 423.00 1.85 1.36 7-878-1290 491.28 1-3/16 7.59 9.25 7.75
15-3/4"D1-6 7-878-166 546.03
15.771.44
1.10 79– – – – – 7/8 4.06 5.25 4.19
D1-8 7-878-168 638.79 1.54 7-878-1680 760.3515.94
2.7693
1 5.35 6.75 5.50D1-11 7-878-169 718.47 1.85 7-878-1690 829.56 1.96 1-3/16 7.59 9.25 7.75
20"D1-8 7-878-208 911.28
19.701.54
1.14 1327-878-2080 1,080.42
19.881.81
1591 5.35 6.75 5.50
D1-11 7-878-209 1,043.19 1.85 7-878-2090 1,173.21 2.83 1-3/16 7.59 9.25 7.75
25"D1-11 7-878-259 1,411.98 24.82 1.85 1.14 232 7-878-2590 1,658.16 25.00 2.83 232 1-3/16 7.59 9.25 7.75D1-15 7-878-265 1,355.76 24.82 1.97 1.14 232 – – – – – 1-3/8 11.00 13.0 11.25
Type 8240 Type 8242
Semi-Machined and Fully Machined Type D1 Backplates• The number of camlock studs needed varies depending on the spindle size, please refer to the table below• Plain back chucks require backplates which may require machining• Designed for direct mounting on camlock spindle nose
Fully Machined D1 Backplates Semi-Machined D1 Backplates
** See mounting instructions on page 385***The projection on the backplate must be sized to fit each chuck
TaperSize
Camlock StudsPart Number Retail Price Dia Thread
D1-3 7-899-103 21.48 9/16"M10 x 1
D1-4 7-899-104 22.77 5/8"D1-5 7-899-105 25.02 3/4" M12 x 1D1-6 7-899-106 28.92 7/8" M16 x 1.5D1-8 7-899-108 33.27 1" M20 x 1.5D1-11 7-899-111 45.84 1-3/16" M22 x 1.5D1-15 7-899-115 103.20 1-3/8" M24 x 1.5
Set Screw Numberof StudsPart Number Retail Price
7-899-305 12.513
67-899-310 12.51
Camlock Studs and Set Screws
• Sold by piece
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 401
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal BackplatesU
NIV
ERSA
LSC
RO
LLC
HU
CK
BA
CK
PLA
TES
402 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Semi-Machined and Fully Machined Type A1/A2 Backplates• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks• See mounting instructions on page 385
Semi-MachinedType 8212
Fully MachinedType 8210
ChuckDia
TaperSize
Fully Machined*** Semi-Machined**
A B D EPart Number Retail Price Thru
Hole CWtlbs Part Number Retail Price Thru
Hole CWtlbs
6-1/4" A-5 – – – – 7-873-065 156.75 3.13 6.5 6.4 1.00 4.125 3.25
8"A-5 7-873-0850* 197.58 – 18 7-873-085 184.56 3.13 19
7.991.50 4.125 3.25
A-6 – – – – 7-873-086 184.80 4.06 15.5 1.30 5.25 4.19
10"A-6 – – – – 7-873-106 239.82 4.06 38
9.961.30 5.25 4.19
A-8 – – – – 7-873-108 255.54 5.35 33 1.70 6.75 5.5
12-1/2"A-6 – – – – 7-873-126 318.57 4.06 45
12.521.30 5.25 4.19
A-8 – – – – 7-873-128 337.32 5.35 62 1.70 6.75 5.5
15-3/4"A-8 7-873-168H 739.65 5.35 64 7-873-168 544.38 5.35 85
15.941.70 6.75 5.5
A-11 7-873-169H 739.65 7.59 51 7-873-169 549.63 7.59 141 2.95 9.25 7.75
20"A-11 – – – – 7-873-209* 819.24 7.59 133
19.88 1.77 9.25 7.75A2-15 7-873-2095 1,444.71 11.08 71 – – – –
25"
A-11 – – – – 7-873-259* 1,218.09 7.59 158
25
1.77 9.25 7.75
A-15 7-873-2600 1,375.50 11.08 154 7-873-2595 1,340.64 11.08 218
2.205
13 11.25
A-20 – – – – 7-873-2598* 1,445.61 16 156 18.25 16.25
32" A2-15 7-873-3215 1,325.82 7.59 253 – – – – 13 11.25
36" 40" 49"A2-15 – – – – 7-873-3615* 1,780.83 11.08 242
21.852.78 13 11.25
A2-20 – – – – 7-873-3620* 1,825.74 16 249 3.15 18.25 16.25
40”
A-15 7-873-4015 2,062.00 11.1 106 – – – – 20.53 1.77 13 14.25
A-20 7-873-4020 2,325.00 16 60 – – – – 20.57 1.97 18.25 16.25
A-28 7-873-4028 2,586.00 16 22.1 – – – – 28.54 2.87 25.5 23
* A2 only
** Semi Machined backplates should be the first alternative for independent chucks
*** Fully Machined backplates supplied with spindle mounting bolts
NOTES: Backplates require some machining on the counterbore projection, see page 385 for more informationThe projection on the backplate must be sized to fit each chuck
Type 8212Type 8210
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 402
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
403
UN
IVER
SAL
SCR
OLL
CH
UC
KB
AC
KPLA
TES
Universal Backplates
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 8250
Fully Machined Type L Backplates• For plain back self-centering chucks• For direct mounting on type L spindle nose• See mounting instructions on page 385
ChuckDia
TaperSize
PartNumber Retail Price Thread
Dia A B C B1 Wtlbs
5" L00 7-879-051 149.46 3-3/4 - 6 4.92 2.13 2.2 0.71 10
6-1/4"L00 7-879-061 162.96 3-3/4 - 6
6.322.13 2.2
0.71 13L0 7-879-062 162.96 4-1/2 - 6 2.52 2.6
8"
L00 7-879-081 181.53 3-3/4 - 6
7.91
2.13 2.2
0.71 22L0 7-879-082 181.53 4-1/2 - 6 2.52 2.6
L1 7-879-083 198.27 6 - 6 2.99 3.35
10"
L00 7-879-101 229.65 3-3/4 - 6
9.88
2.13 2.20
0.83 33L0 7-879-102 229.65 4-1/2 - 6 2.52 2.60
L1 7-879-103 233.55 6 - 6 2.99 3.35
L2 7-879-104 261.72 7-3/4 - 5 3.50 4.29
12-1/2"
L0 7-879-122 342.60 4-1/2 - 6
12.44
2.52 2.60
1.10
39
L1 7-879-123 342.60 6 - 6 2.99 3.3557
L2 7-879-124 426.60 7-3/4 - 5 3.50 4.29
15-3/4"
L0 7-879-162 522.21 4-1/2 - 6
15.83
2.52 2.60
1.10 95L1 7-879-163 533.07 6 - 6 2.99 3.35
L2 7-879-164 544.68 7-3/4 - 5 3.50 4.29
L3 7-879-165 578.67 10-3/8 - 4 4.02 5.43
20"L2 7-879-204 1,050.18 7-3/4 - 5
19.763.50 4.29
1.14 159L3 7-879-205 1,077.75 10-3/8 - 4 4.02 5.43
25"L2 7-879-254 1,530.63 7-3/4 - 5
24.823.78 4.29
1.38 397L3 7-879-255 1,569.12 10-3/8 - 4 4.02 5.43
NOTE: Backplates require somemachining on the counterboreprojection, see page 385 formore information
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 403
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal BackplatesU
NIV
ERSA
LSC
RO
LLC
HU
CK
BA
CK
PLA
TES
404 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
TaperSize
Fully Machined Backplate Semi-Machined BackplateStudDia
Numberof
StudsB G
HoleDiad
PartNumber Retail Price Dia
A K Wtlbs
PartNumber Retail Price Dia
A
FlangeThickness
L
Wtlbs
5" C-2 7-921-052 146.46 4.94 .579 5.3 – – – – – – 0 2.480 1.654 1.59
6-1/4"C-4 7-921-064 147.60
6.32 .83 9.5– – – – – .768 3 3.25 2.50 2.40
C-5 7-921-065 145.56 7-921-0650 141.36 6.38 1.14 9.3 .768 4 4.125 3.25 3.13
8" C-5 7-921-085 173.227.89 .83 15
7-921-0850 167.978.00
1.9727
.768 4 4.125 3.25 3.13
C-6 7-921-086 179.01 7-921-0860 173.76 1.38 .846 4 5.25 4.19 4.06
10"C-5 7-921-105 218.28
9.86 .83 247-921-1050 211.92
9.96 1.93 35.768 4 4.125 3.25 3.13
C-6 7-921-106 223.53 7-921-1060 246.06 .846 4 5.25 4.19 4.06
12-1/2"
C-6 7-921-126 296.52
12.42 1.30 40
7-921-1260 287.07
12.52
2.76
49
.846 4 5.25 4.19 4.06
C-8 7-921-128 309.15 7-921-1280 315.51 2.17 1.063 4 6.75 5.50 5.35
C-11 7-921-129 343.38 7-921-1290 408.39 2.17 1.339 6 9.25 7.75 7.59
15-3/4"C-8 7-921-168 534.45
15.77 1.30 807-921-1680 516.42
15.942.76
931.063 4 6.75 5.50 5.35
C-11 7-921-169 566.64 7-921-1690 544.74 1.96 1.339 6 9.25 7.75 7.59
20"C-8 7-921-208 835.23
19.70 1.34 132– –
––
–1.063 4 6.75 5.50 5.35
C-11 7-921-209 892.14 – – – 1.339 6 9.25 7.75 7.59
25" C-11 7-921-259 1,344.42 24.82 1.65 231 7-921-2590 1,283.67 25.00 2.83 232 1.339 6 9.25 7.75 7.59
Type C, DIN 55027 Spindle Backplates
TaperSize
PartNumber Retail Price
StudDiainch
StudDiamm
Threadmm
Numberof
Studs
C-4 7-921-904 12.48 .7677 19.5 M10 - 39 3
C-5 7-921-905 12.81 .7677 19.5 M10 - 43
4C-6 7-921-906 14.46 .8465 21.5 M12 - 50
C-8 7-921-908 17.40 1.063 27.0 M16 - 60
C-11 7-921-911 24.45 1.339 34.0 M20 - 75 6
Type 8232Type 8230
DIN Studs
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 404
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
405
UN
IVER
SAL
SCR
OLL
CH
UC
KJA
WS
Universal Scroll Chuck Jaws
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Hard Master Jaws for 2, 3 and 4-Jaw Self-Centering Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets
ChuckDia
2-JawPart Number Retail Price 3-Jaw
Part Number Retail Price 4-JawPart Number Retail Price
5" – – 7-885-305 144.33 7-885-405 192.81
6-1/4" 7-885-206 119.46 7-885-306 154.47 7-885-406 222.72
8" 7-885-208 145.35 7-885-308 169.17 7-885-408 243.93
10" 7-885-210 178.86 7-885-310 217.80 7-885-410 312.27
12-1/2" 7-885-212 213.06 7-885-312 299.22 7-885-412 433.74
15-3/4" 7-885-216 265.50 7-885-316 397.56 7-885-416 587.76
20" – – 7-885-320 726.69 7-885-420 995.04
25" – – 7-885-325 859.29 7-885-425 1,318.35
32" – – 7-885-332 1,080.00 – –
40" – – 7-885-340 4,660.00 – –
ChuckDia K H G F J L D E B OAL
A C S ThreadM
Wt*lbs
5" 5/8 57/64
.4996 5/16
.1575
.4724.3150 .3150 .7874
2.1259 1.102
.126
5/16-18 .31
6-1/4"" 3/4 1-1/8.5511
2.5590 1.1423/8-16
.40
8" 7/8 1-3/8 .3543 .3937 .9843 3.1102 1.299 .68
10" 1-1/16 1-9/16
.7496 1/2
.6299.4331
.47241.1024 3.6220 1.417
1/2-131.06
12-1/2" 1-1/4 1-7/8 .5000 1.2598 4.3307 1.575 1.70
15-3/4"
1-1/2 2-1/4 .2835
.8661 .5906
.5512
1.4173 5.1181 1.929 5/8-11 2.43
20"
1.2598 .6299
1.5748 6.5351 2.126
3/4-10
4.81
25"1.9685
8.26772.146
7.36
32" 8.8583 7.90
5" to 10" Diameters
20" Diameter 25" to 32" Diameters
12-1/2" and 15-3/4" Diameters
* Approximate weight of one jaw
All solid jaws and master jaws aremanufactured to BISON-BIAL’s rigidspecifications
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 405
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
UN
IVER
SAL
SCR
OLL
CH
UC
KJA
WS
AN
DSP
AR
EPA
RTS
406 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price
5" 7-883-305 160.02 7-883-405 201.81
6-1/4" 7-883-306 196.29 7-883-406 229.05
8" 7-883-308 212.94 7-883-408 301.38
10" 7-883-310 249.51 7-883-410 342.18
12-1/2" 7-883-312 307.62 7-883-412 421.20
15-3/4" 7-883-316 417.69 7-883-416 571.92
20" 7-883-320 744.09 7-883-420 1,031.61
25"7-883-325 853.68 7-883-425 1,152.27
32"
StandardJaws
ChuckDia K H G J K D E F N C B OAL
A O P Wt per Pclbs
5" 5/8 57/64
.4996
.35 .59
.3129
.157
.1260
.315 1.516 .866 2.205 .57 1.38 .37
6-1/4" 3/4 1-1/8.43 .71
.335 1.634 .984 2.638 .71 1.63 .56
8" 7/8 1-3/8 .374 1.713 1.063 3.347 .85 2.01 .79
10" 1-1/16 1-9/16.7496 .55 .78
.5004
.472 2.023 1.280 3.740 .96 2.32 1.32
12-1/2" 1-1/4 1-7/8 .512 2.165 1.457 4.331 1.04 2.68 2.01
15-3/4"
1-1/2 2-1/4 .7496
.71 1.0
.2480
.532 2.5391.654
5.000
1.06 3.01 2.98
20"
.87 1.3
.689 2.933 1.97 3.46 3.42
25".827 3.228 2.047 2.01 3.50 5.34
32"
Mounting Bolts for Hard and Soft Top Jaws
LChuckDia Thread
Screw Number 1 Screw Number 2
PartNumber Retail Price L Part
Number Retail Price L
5" 5/16"-18 7-897-503 9.18
3/4
7-897-504 8.99 1
6-1/4"3/8"-16 7-897-510 9.41 7-897-512 10.05 1-1/4
8"
10"1/2"-13 7-897-530 10.08 1 7-897-531 10.08 1-1/2
12-1/2"
15-3/4" 5/8"-11 7-897-540 9.79 1-1/4 7-897-541 9.79 1-3/4
20"
3/4"-10 7-897-558 7.68 1-1/2
7-897-561 15.97 3
25"7-897-562 14.11 3-1/4
32"
40" M22x2.5 7-897-5621 12.00 1-3/4 7-897-5622 12.00 2-3/4
Hard Top Jaws for 3 and 4-Jaw Scroll Chucks• American Standard Tongue and Groove Jaws• Sold in sets• Standard jaws are designed for finishing and medium duty machining• Heavy duty jaws are designed for heavy duty machining
Universal Jaws and Spare Parts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 406
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
407
UN
IVER
SAL
SCR
OLL
CH
UC
KJA
WS
AN
DSPA
RE
PAR
TS
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Extended and Standard Length Wrenches
Enhanced Serration Jaws for Universal and Precision Scroll Chucks
• Jaw gripping surfaces serration 1/8"• Sold in sets• Jaws are recommended forheavy machining applications
ChuckDia
Enhanced SerrationJaws
Part NumberRetail Price
10" 7-883-3100 333.6012" 7-883-3120 413.7016" 7-883-3160 558.3420" 7-883-3200 1,108.10
25" and 32" 7-883-3250 1,174.2140" 7-883-3400 3,330.00
ChuckDia
3-JawPart Number Retail Price 4-Jaw Retail Price C L B F E N P O Wt per
Pc lbs
3" 7-881-303 96.18 – – 1.1024 1.2598 .4331.2362 .2362
.2362 0.827 .374 .10
4" 7-881-304 99.54 – – 1.2598 1.6535 .5906 .2756 1.063 .433 .19
5" 7-881-305 118.80 7-881-405 174.15 1.5748 2.0079.7874 .3150 .3150
.3150 1.313 .512 .40
6-1/4" 7-881-306 136.53 7-881-406 199.65 2.0866 2.7559 .3937 1.772 .748 .80
8" 7-881-308 145.50 7-881-408 206.70 2.1260 3.3459 .9843 .3543 .3937 .4724 2.244 .906 1.07
10" 7-881-310 180.54 7-881-410 253.83 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 1.73
12-1/2" 7-881-312 296.19 7-881-412 430.56 2.9528 4.9213 1.2598 .5000 .7087 3.268 1.358 2.90
15-3/4" 7-881-316 354.69 7-881-416 489.51 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 5.20
20" 7-881-320 806.58 7-881-420 1,057.17 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 7.33
25" 7-881-325 1,011.57 7-881-425 1,238.46 4.3307 8.8583 1.9685 1.1024 5.866 2.598 13.00
ID Hard Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
ChuckDia
SquareSize
Extended Length Standard Length Heavy Duty
PartNumber Retail Price L Part
Number Retail Price L PartNumber Retail Price
3" .2344 7-889-003L 15.38 3.15 7-889-003 25.74 2.36 7-889-003C 12.00
4" .3543 – – –7-889-005 32.52 3.15 7-889-005C 15.15
5" .3543 – – –
6-1/4" .43317-889-008L 56.00
8.5
7-889-008 34.59 3.94 7-889-008C 16.428" .4331
10" .55127-889-012L 65.31 7-889-012 43.50 4.72 7-889-012C 20.77
12-1/2" .5512
15-3/4" .6693 – – – 7-889-016 61.50
5.51
7-889-016C 28.42
20" .7480 – – –7-889-025 94.14
– –
25" .7480 – – – – –
32" .7480 – – – 7-889-032 119.55 – –
Universal Jaws and Spare Parts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 407
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Universal Scroll Chuck JawsU
NIV
ERSA
LSC
RO
LLC
HU
CK
JAW
S
408 UNIVERSAL SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price C L B F E N P O Wt perPc lbs
3" 7-880-303 96.18 – – 1.1024 1.2598 .4331.2362 .2362
.2362 0.827 .374 .10
4" 7-880-304 109.86 – – 1.2598 1.6535 .5906 .2756 1.063 .433 .19
5" 7-880-305 118.80 7-880-405 174.15 1.5748 2.0079.7874 .3150 .3150
.3150 1.313 .512 .40
6-1/4" 7-880-306 136.53 7-880-406 199.65 2.0866 2.7559 .3937 1.772 .748 .80
8" 7-880-308 145.50 7-880-408 206.70 2.1260 3.3459 .9843 .3543 .3937 .4724 2.244 .906 1.07
10" 7-880-310 180.24 7-880-410 253.83 2.4803 4.1339 1.1024 .4331.4724
.5512 2.736 1.102 1.73
12-1/2" 7-880-312 296.19 7-880-412 430.56 2.9528 4.9213 1.2598 .5000 .7087 3.268 1.358 2.90
15-3/4" 7-880-316 354.69 7-880-416 489.51 3.6220 5.7087 1.4173 .5906
.5512
.8661 3.898 1.417 5.20
20" 7-880-320 467.13 7-880-420 1,057.17 3.9370 7.0866 1.5748.6299
1.0236 4.705 1.969 7.33
25" 7-880-325 1,011.57 7-880-425 1,248.36 4.3307 8.8583 1.9685 1.1024 5.866 2.598 13.00
OD Hard Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
ChuckDia
2-JawPart
Number
RetailPrice
3 and 4-JawPart
Number
RetailPrice A
3 and4-Jaw
B
2-JawB C D E F G H I J
Bolt SizeM
3-Jaw
Wtper Pc
lbs
5" – – 7-884-305 16.00 2.520 0.866 – 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
5/16-18 .66
6-1/4" 7-884-206 39.65 7-884-306 18.90 3.071 1.0001.575
1.634 0.8386 1-1/2 1.3393/8-16
1.01
8" 7-884-208 34.69 7-884-308 21.40 3.543 1.063 1.713 0.9488 1-3/4 1.575 1.43
10" 7-884-210 51.36 7-884-310 31.10 4.173 1.280 1.850 2.028
.5000
1.0827 2-1/8
.750
1.7721/2-13
2.54
12-1/2" 7-884-212 69.38 7-884-312 42.10 4.724 1.4572.047
2.165 1.2087 2-1/2 2.087
.2480
3.53
15-3/4" – – 7-884-316 54.40 5.512 1.654 2.539
1.3543 3 2.480 .406
5/8-11 4.85
20" – – 7-884-320 115.78 5.512 1.654 – 2.933
3/4-10
5.29
25" – – 7-884-325 165.63 6.299 2.047 –3.288 9.26
32" – – 7-884-332 321.15 6.299 2.047 –
Jaw mounting bolts can befound on page 406
Soft Top Jaws for 2, 3, and 4-Jaw Chucks
• Sold by piece• American Standard Tongue and Groove Jaws
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:29 PM Page 408
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
409
UN
IVER
SAL
JAW
SA
ND
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts UNIVERSAL SCROLL CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
3-JawPart Number Retail Price 4-Jaw
Part Number Retail Price C L B F E Wt perPc lbs
3" 7-882-303 70.23 – – 1.1024 1.2598 .4331.2362 .2362
.13
4" 7-882-304 75.09 – – 1.2598 1.6535 .5906 .29
5" 7-882-305 79.11 7-882-405 117.30 1.5748 2.0079.7874 .3150 .3150
.57
6-1/4" 7-882-306 91.47 7-882-406 134.31 2.0866 2.7559 1.10
8" 7-882-308 105.18 7-882-408 151.74 2.1260 3.3459 .9843 .3543 .3937 1.77
10" 7-882-310 132.99 7-882-410 195.12 2.4803 4.1339 1.1024 .4331.4724
3.00
12-1/2" 7-882-312 212.07 7-882-412 329.70 2.9528 4.9213 1.2598 .5000 4.20
15-3/4" 7-882-316 230.55 7-882-416 416.67 3.6220 5.7087 1.4173 .5906
.5512
5.33
20" 7-882-320 500.43 7-882-420 742.68 3.9370 7.0866 1.5748.6299
11.00
25" 7-882-325 609.48 7-882-425 959.76 4.3307 8.8583 1.9685 19.00
Soft Solid Jaws for 3 and 4-Jaw Scroll Chucks• Sold in sets
Spare Parts for 2, 3, and 4-Jaw Chucks with Semi-Steel Body
Pinion Screw
PartNumber
RetailPrice
7-888-904 3.33
7-888-906 3.33
7-888-910 5.04
7-888-920 7.86
Pinion**Part
NumberRetailPrice OD OAL Wt
lbs
7-886-303 21.09 .75 1.02 .04
7-886-304 30.87 .98 1.40 .12
7-886-305 31.35 .98 1.63 .14
7-886-306 33.51 1.1 1.87 .20
7-886-308 40.32 1.2 2.30 .42
7-886-310 48.96 1.4 2.72 .51
7-886-312 59.58 1.5 3.60 .77
7-886-316 81.72 1.7 4.41 1.48
7-886-320 239.76
2.0
5.30 2.09
7-886-325 286.17 5.87 2.51
7-886-332 471.268.07 4.41
7-886-340 789.00
ChuckDia
Scroll**
PartNumber
RetailPrice OD H Wt
lbs
3" 7-887-303 95.10 2.16 .41 .16
4" 7-887-304 106.44 2.74 .49 .34
5" 7-887-305 125.79 3.70 .53 .66
6-1/4" 7-887-306 148.29 4.88 .71 1.85
8" 7-887-308 180.27 6.26 .79 2.65
10" 7-887-310 243.15 7.84 .87 4.28
12-1/2" 7-887-312 321.87 10.1 .98 9.50
15-3/4" 7-887-316 775.71 12.9 1.10 18.8
20" 7-887-320 1,665.90 16.4 1.18 36
25" 7-887-325 2,409.72 21.3 1.57 66
32" 7-887-332 2,110.4627.4 1.77 148
40" 7-887-340 10,760.00
** For Semi-Steel chucks onlyEye Bolts
ChuckDia L D
15-3/4" and 20" .9843 1.1811
25" and 28" 1.2205 1.3386
32", 36" and 40" 1.4961 1.5748
49" 1.7717 1.9685
Universal Jaws and Spare Parts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 409
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LAR
GE
THR
U-H
OLE
SCR
OLL
CH
UC
KS
AN
DSP
AR
EPA
RTS
410 THRU-HOLE SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Large Thru-Hole Scroll Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia Material
Hard MasterJaws
3 Pc SetPart Number
RetailPrice
Hard TopJaws
3 Pc SetPart Number
RetailPrice
Hard Top JawsHeavy Duty
3 Pc SetPart Number
RetailPrice
Soft TopJaw1 Pc
Part Number
RetailPrice
Scroll1 Pc
Part Number
RetailPrice
31-1/2" Steel 7-885-332 1,080 7-883-325 853.68 7-883-3250 1,174.21 7-884-325 165.63 7-887-332 2,110.46
ChuckDiaD
HoleDiad
E F H h K RL M N O P
min-max
31-1/2" 10-1/2" 17.717 14.500 6.26 9.67 12-1/2 .7874 5.91 - 18.98 11.10 - 24.17 17.64 - 30.71 11.89 - 24.96 18.43 - 31.50
ChuckDia Material
Pinion1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
Pinion Screw1 Pc
Part Number
RetailPrice
ChuckMountingBolts 1 Pc
Part Number
RetailPrice
31-1/2" Steel 7-886-332 471.26 7-889-032 119.55 7-888-920 7.86 7-897-584 20.16
See pages 399-404 for backplates
ChuckDia
PartNumber
RetailPrice
HoleDia
RPMmax
Wtlbs
ChuckBody
31-1/2”7-800-3200 13,778.43
10-1/2”300 738 Semi-Steel
7-820-3200 22,717.53 450 772 Steel
Type 3205Type 3305 or 3307
Optional Accessories:
• Soft top jaws
Spare Parts
32" 3-Jaw Self-Centering Plain Back Scroll Chuckswith 10-1/2" Thru-Hole
3-Jaw Universal Scroll Chucks comewith a 10-1/2" thru-hole, which can beenlarged to 12-1/2" maximum by user
• Two-piece reversible tongue and groove jaws• Available in Semi-Steel or Steel body• Jaws, scroll plate, and three pinions are madeof fine Alloy Steel, then carefully heat treatedand ground
• Balanced scroll
Standard Accessories:
• 1 Set of two-piece reversible jaws(hard top jaws and hard top master jaws)
• 1Wrench• 1 Set of mounting bolts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 410
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
411
LAR
GE
THR
U-H
OLE
SCR
OLL
CH
UC
KS
AN
DSPA
RE
PAR
TS
Quality Products • Partnership • Industry Experts THRU-HOLE SCROLL CHUCKS
Prices are subject to change without notice
Large Thru-Hole Scroll Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia Material
Hard MasterJaws
3 Pc SetPart Number
RetailPrice
Hard Top JawsHeavy Duty
3 Pc SetPart Number
RetailPrice
Soft TopJaw1 Pc
Part Number
RetailPrice
Scroll1 Pc
Part Number
RetailPrice
40" Steel 7-885-340 4,660.00 7-883-3400 3,330.00 7-884-340 495.00 7-887-340 10,760.00
ChuckDiaD
HoleDiad
E F H h RL M N O P
min-max
40" 16.06 20.472 15.252 6.73 10.65 .7874 3.94 - 23.62 16.73 - 42.13 19.69 - 45.28 13.78 - 42.52 16.93 - 45.28
ChuckDia Material
Pinion1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
Pinion Screw1 Pc
Part Number
RetailPrice
ChuckMountingBolts 1 Pc
Part Number
RetailPrice
40" Steel 7-886-340 789.00 7-889-032 119.55 7-888-920 7.86 7-859-92460 48.60
ChuckDia
PartNumber
RetailPrice
HoleDia
RPMmax
Wtlbs
Max wt of workpiecewithout support
Max wt of workpiecewith support
40" 7-820-4000 42,800.00 16.00 650 1678 1,300 lbs 24,000 lbs
Spare Parts
See pages 399-404 for backplates
40" 3-Jaw Self-Centering Plain Back Scroll Chuckswith 16" Thru-Hole• Forged Steel body• Two-piece reversible tongue and groove jaws• Sharp serrations on hard top jaws• Jaws, scroll plate, and three pinions are madeof fine Alloy Steel, hardened and ground
• Balanced scroll• Scroll hardened min. 42 HRC,min. depth 0.5mm
• Jaw guideways hardened min. 48-52 HRC,min. depth 0.5mm
Standard Accessories:
• 1 Set of two-piece reversible jaws(hard top jaws and hard top master jaws)
• 1Wrench• 1 Set of mounting bolts
Optional Accessories:
• Soft top jaws
NEW!
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 411
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
ALA
RG
ETH
RU
-HO
LESC
RO
LLC
HU
CK
SA
ND
SPA
RE
PAR
TS
412 THRU-HOLE SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Extra Large Thru-Hole Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
See pages 399-404 for backplates
ChuckDiaA
PartNumber
RetailPrice
ThruHole
E
Jaw Stroke d Max Wt of WorkpieceB F D a M b c RPM
maxWtlbsmin max without
Supportwith
Support
15-3/4" 7-819-1600 2,394.24 8.66 6.614 11.34 110 3307 4.13 15.000 14.252 4.72 M12x40 5/8 - 11
.74996
500 128
20" 7-819-2000 5,857.92 12.60 9.874 14.96 177 5512 4.72 18.957 18.189 4.72M16x40
3/4 - 10
350 168
26" 7-819-2600 8,412.78 15.98 14.80 19.57 265 7716 5.32 24.409 22.835 5.00 250 258
31-1/2" 7-819-3200 19,363.92 16.14 7.402 22.28 441 8820 5.95 18.110 27.953 8.86 7/8-9x6 200 468
Type 3295
ChuckDia
Hard MasterJaws
3 Pc SetPart Number
RetailPrice
Hard TopJaws
3 Pc SetPart Number
RetailPrice
Hard TopJaws, HeavyDuty 3 Pc SetPart Number
RetailPrice
Soft TopJaw1 Pc
Part Number
RetailPrice
Scroll1 Pc
Part Number
RetailPrice
15-3/4" 7-885-116 457.29 7-883-316 417.69 7-883-3160 558.34 7-884-316 54.40 7-887-216 1,009.14
20" 7-885-120 721.53 7-883-320 744.09 7-883-3200 1,108.10 7-884-320 115.78 7-887-220 2,175.21
26" 7-885-126 1,057.547-883-325 853.68 7-883-3250 1,174.21 7-884-325 165.63
7-887-226 3,159.27
31-1/2" 7-885-332 1,080.00 7-887-232 1,954.00
ChuckDia
Pinion1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
PinionScrew1 Pc
Part Number
RetailPrice
ChuckMountingBolts 1 Pc
Part Number
RetailPrice
15-3/4" 7-886-216 100.507-889-016 61.50
7-888-920 7.86
7-897-111 9.79
20" 7-886-220 316.327-897-125 10.98
26" 7-886-226 422.58 7-889-025 94.14
31-1/2” 7-886-232 550.02 7-889-032 119.55 7-897-574 20.03
Spare Parts
3-Jaw Self-Centering Plain Back Semi-Steel Scroll Chuckswith Extra Large Thru-Hole, Medium Duty• Two-piece reversible American Standard Tongue and Groove Jaws• Designed for pipe machining or pipe welding cut-off operations• Can be used on lathes, rotary tables and welding devices• Jaws, scroll plate, and three pinions are made of fine Alloy Steel,then carefully heat treated and ground
• Balanced scroll
Standard Accessories for 15-3/4", 20" and 26" Diameter Chucks:
• 1 Set of master jaws• 1Wrench• 1 Set of mounting bolts
Standard Accessories for 31-1/2" Diameter Chucks:
• 1 Set of master jaws• 1 Set of hard top jaws
* Steel body chucks availableon special order
Optional Accessories:
• Soft top jaws• Hard top jaws
• 1Wrench• 1 Set of mounting bolts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 412
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
413
FRO
NT
MO
UN
TING
SCR
OLL
CH
UC
KS
Quality Products • Partnership • Industry Experts FRONT MOUNTING CHUCKS
Prices are subject to change without notice
Front Mounting Scroll Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
Semi-SteelChuck
Part Number
Forged SteelChuck
Part Number
HoleDiad
F EH7 C H h
BackThread
M
Wtlbs
5" 7-812-0500 7-813-0500 1.2598 4.2520 3.7402
.1575
2.205 1.575 M8 9.3
6-1/4" 7-812-0600 7-813-0600 1.6535 5.5118 4.9213 2.559 1.693 M10 17.0
8" 7-812-0800 7-813-0800 2.1654 6.9291 6.2992 2.953 1.772 M10 32.0
10" 7-812-1000 7-813-1000 2.9921 8.8189 7.8740
.1969
3.347 2.087 M12 52.0
12-1/2" 7-812-1200 7-813-1200 4.0551 11.2598 10.2362 3.701 2.244 M12 87.0
15-3/4" 7-812-1600 7-813-1600 5.3543 14.2519 12.9921 4.134 2.639 M16 163
ChuckDiaD
Semi-SteelChuck
Part Number
RetailPrice
Forged SteelChuck
Part Number
RetailPrice
5" 7-812-0500 502.17 7-813-0500 646.20
6-1/4" 7-812-0600 543.21 7-813-0600 659.00
8" 7-812-0800 629.64 7-813-0800 826.92
10" 7-812-1000 822.84 7-813-1000 1,130.94
12-1/2" 7-812-1200 1,263.72 7-813-1200 1,514.88
15-3/4" 7-812-1600 2,097.00 7-813-1600 2,719.86
Mounting Bolts
Thread G Numberof Bolts
5/16-18 x 2-1/43
3/8-16 x 2-3/4
3/8-16 x 3-1/4
61/2-13 x 3-1/2
5/8-11 x 4
5/8-11 x 4-1/2
3-Jaw Steel and Semi-Steel Body with 2 Piece Jaws
4-Jaw Semi-Steel Body with 2 Piece Jaws
ChuckDiaD
PartNumber
RetailPrice
HoleDiad
F EH7 C H h
BackThread
M
Wtlbs
5" 7-814-0500 650.52 1.2598 4.2520 3.7402
.1575
2.205 1.575 M8 9.3
6-1/4" 7-814-0600 669.00 1.6535 5.5118 4.9213 2.559 1.693 M10 17.0
8" 7-814-0800 782.22 2.1654 6.9291 6.2992 2.953 1.772 M10 32.0
10" 7-814-1000 962.58 2.9921 8.8189 7.8740.1969
3.347 2.087 M12 52.0
12-1/2" 7-814-1200 1,427.55 4.0551 11.2598 10.2362 3.701 2.244 M12 87.0
15-3/4" 7-814-1600 2,597.13 5.3543 14.2519 12.9921 .1969 4.134 2.639 M16 163
Mounting Bolts
Thread G Number of Bolts
5/16-18 x 2-1/43
3/8-16 x 2-3/4
3/8-16 x 3-1/4
61/2-13 x 3-1/2
5/8-11 x 4
5/8-11 x 4-1/2
Type 3575Type 3275
Type 3675
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 413
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
FRO
NT
MO
UN
TIN
GSC
RO
LLC
HU
CK
S
414 FRONT MOUNTING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Front Mounting Scroll Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3 and 4-Jaw Self-Centering Plain Back Scroll Chucks• Can be mounted directly on 3/6 slot rotary tables or on a base plate when the rotary table has 3/6 or 4/8 T-slots• Base plates are designed for use with all rotary tables and other devices where back mounting chucks cannot be used• These chucks can also be mounted to a rough machined backplate, but will require machining of bolt hole patternsand projections for finished assembly
ChuckDiaD
PartNumber
RetailPrice
HoleDiad
F EH7 C H h1
BackThread
M
Wtlbs
4" 7-811-0400 336.09 .7874 3.2677 2.7559 .1181 1.969 .669M8
5.3
5" 7-811-0500 342.51 1.2598 4.2520 3.7402
.1575
2.205 .787 9.3
6-1/4" 7-811-0600 395.94 1.6535 5.5118 4.9213 2.559 1.260M10
17.0
8" 7-811-0800 464.76 2.1654 6.9291 6.2992 2.953 1.142 32.0
10" 7-811-1000 658.77 2.9921 8.8189 7.8740.1969
3.347 1.339M12
52.0
12-1/2" 7-811-1200 986.61 4.0551 11.2598 10.2362 3.701 1.693 87.0
Mounting Bolts
ThreadG
Numberof Bolts
5/16-18 x 2-1/43
3/8-16 x 2-3/4
61/2-13 x 3-1/2
5/8-11 x 4
3-Jaw Semi-Steel Body with Solid Jaws
Type 3274
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 414
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
415
FRO
NT
MO
UN
TING
SCR
OLL
CH
UC
KB
ASE
PLATES
Quality Products • Partnership • Industry Experts FRONT MOUNTING CHUCKS
Prices are subject to change without notice
Front Mounting Base Plates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Base Plate
PartNumber Retail Price H Wt
lbs
5" 7-872-305 257.91 0.57 3.8
6-1/4" 7-872-306 200.79 0.65 5.5
8" 7-872-308 273.27 0.77 7.7
10" 7-872-310 300.90 0.81 12.9
12-1/2" 7-872-312 520.26 1.00 23.9
15-3/4" 7-872-316 432.42 1.08 40.32
Bolts
PartNumber
RetailPrice
7-872-905 9.39
7-872-906 14.58
7-872-910 11.22
7-872-916 8.55
Base Plates for Front Mount Chucks• Designed for use with BISON-BIAL 2, 3and 4 jaw front mounting self-centeringlathe chucks
• Ideal for use on milling and drillingmachines as well as on rotary tableswith 3/6 and 4/8 slots
• Base plates are supplied with fourmounting bolts with T-nuts and oneMT Pin
• Chucks are sold separately
For plate dimensions, see pages 478-479
Base Plates for Back Mount Chucks• Designed for use with BISON-BIAL 2, 3, and 4-jaw self-centering Plain Backlathe chucks Back Mount ONLY with a Semi-Steel or Forged Steel body aswell as for 2, 3, 4, and 6-jaw SET-TRU chucks
• Ideal for use on milling and drilling operations• Base plates are supplied with two mountingbolts with T-nuts, two T-slot keys, and achuck wrench with sliding T-bar
• Chucks are sold separately
Type 9452Type 9450
Type 8293
MT PinPart
NumberRetailPrice MT
7-872-932 13.05 2
7-872-933 14.28 3
7-872-934 15.57 4
7-872-935 54.00 5
Plate for SET-TRU ChucksA B h Wt
lbsPartNumber
RetailPrice D E F d*
7-630-606 248.70 3.386 5.5118 2.36M10
9.84 7.48 1.1 10.3
7-630-608 285.63 4.331 6.9291 2.76 11.81 9.21 1.26 16.2
7-630-610 341.67 5.708 8.8188 3.94 M12 13.94 11.5 1.26 25
7-630-612 430.92 7.087 11.2598 4.72 M16 16.77 14.25 1.57 35.5
* SET-TRU base plates have threaded thru-holes
ChuckDia
Plate for Universal Chucks
PartNumber
RetailPrice D E F d
6-1/4" 7-630-006 243.03 4.9213 5.5118 3.5430.4331
8" 7-630-008 274.50 6.2992 6.9291 5.118
10" 7-630-010 353.31 7.874 8.8189 5.787 0.5512
12-1/2" 7-630-012 480.69 10.2362 11.2598 6.690.6693
15-3/4" 7-630-016 600.21 12.9921 14.2519 6.693
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 415
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
FRO
NT
MO
UN
TIN
GSC
RO
LLC
HU
CK
SPA
RE
PAR
TS
416 FRONT MOUNTING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Front Mounting Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Mounting Bolts
Part Number Retail Price Thread G Number of Bolts
4"7-897-509 6.91
5/16-18 x 2-1/4
35" 5/16-18 x 2-1/4
6-1/4" 7-897-516 6.91 3/8-16 x 2-3/4
8" 7-897-517 6.94 3/8-16 x 3-1/4
610" 7-897-534 5.60 1/2-13 x 3-1/2
12-1/2" 7-897-5465 10.82 5/8-11 x 4
15-3/4" 7-897-550 4.62 5/8-11 x 4-1/2
Mounting Bolts
ChuckDia
MasterJaws
3 Pc SetPart Number
RetailPrice
MasterJaws
4 Pc SetPart Number
RetailPrice
OD Jaws3 Pc Set
Part Number
RetailPrice
ID Jaws3 Pc Set
Part Number
RetailPrice
Soft TopJaw 1 Pc
Part Number
RetailPrice
4" – – – – 7-880-304 109.86 7-881-304 99.54 – –
5" 7-885-305 144.33 7-885-405 192.81 7-880-305 118.80 7-881-305 118.80 7-884-305 16.00
6-1/4" 7-885-306 154.47 7-885-406 222.72 7-880-306 136.53 7-881-306 136.53 7-884-306 18.90
8" 7-885-308 169.17 7-885-408 243.93 7-880-308 145.50 7-881-308 145.50 7-884-308 21.40
10" 7-885-310 217.80 7-885-410 312.27 7-880-310 180.24 7-881-310 180.54 7-884-310 31.10
12-1/2" 7-885-312 299.22 7-885-412 433.74 7-880-312 296.19 7-881-312 296.19 7-884-312 42.10
15-3/4" 7-885-316 397.56 7-885-416 587.76 – – – – 7-884-316 54.40
ChuckDia
ScrollSemi-Steelbody 1 Pc
Part Number
RetailPrice
ScrollSteel body
1 PcPart Number
RetailPrice
PinionSemi-Steelbody 1 Pc
Part Number
RetailPrice
PinionSteel body
1 PcPart Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
4" 7-887-304 106.44 – – 7-886-304 30.87 – –7-889-005 32.52
5" 7-887-305 125.79 7-887-505 155.46 7-886-305 31.35 7-886-505 36.90
6-1/4" 7-887-306 148.29 7-887-506 184.50 7-886-306 33.51 7-886-506 40.507-889-008 34.59
8" 7-887-308 180.27 7-887-508 227.43 7-886-308 40.32 7-886-508 47.82
10" 7-887-310 243.15 7-887-510 307.08 7-886-310 48.96 7-886-510 57.637-889-012 43.50
12-1/2" 7-887-312 321.87 7-887-512 407.28 7-886-312 59.58 7-886-512 71.16
15-3/4" 7-887-316 775.71 – – 7-886-316 81.72 7-886-516 94.80 7-889-016 61.50
Spare Parts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 416
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
417
CO
MB
INA
TION
LATH
EC
HU
CK
S
Quality Products • Partnership • Industry Experts COMBINATION LATHE CHUCKS
Prices are subject to change without notice
Combination Lathe Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia A B C D
EH J K Thread
Mmin max
5" 4.2520 3.7402 1.2598 0.118 4.72 3.7402 .1575 2.9528 M86-1/4" 5.5118 4.9213 1.6535 0.118 6.30 4.0551 .1693 3.3071 M108" 6.9291 6.2992 2.1654 0.15 8 5.0000 .2165 3.7800 M1010" 8.8190 7.8740 2.9921 0.20 10 5.3150 .2362 4.0157 M12
12-1/2" 11.2598 10.2362 4.0551 0.39 12-1/5 6.2402 .2362 4.6063
M1615-3/4" 14.2520 12.9921 5.3543 0.59 15-3/4 7.1650 .2480 4.840020" 18.0315 16.5354 7.4803 0.78 20 8.1100 .3150 5.708725" 23.0709 21.4567 9.2130 1.18 25 9.1340 .3937 6.2992
4-Jaw Combination Lathe Chucks Features,Benefits and Dimensions
BISON-BIAL Plain Back Combination Chucks:
• Combine the advantages of a scroll chuckwith those of an independent chuck
• Each jaw may be adjusted individuallywith an independent operating screw
• After the desired eccentric setting has been made,all jaws can then be opened and closedsimultaneously with the use of a scroll and pinion
• The jaws are reversible and may be usedas inside and outside jaws
Standard Accessories:
• 1 Set of hard solid reversible jaws• 1Wrench• 1 Set of mounting screws
Optional Accessories
• Soft solid jaws
ChuckDia
Semi-Steel
PartNumber
RetailPrice
HoleDia RPM Wt
lbs5" 7-848-0500 929.58 1.30 3200 12.8
6-1/4" 7-848-0600 1,054.68 1.65 3000 23.68" 7-848-0800 1,283.88 2.17 2000 41.410" 7-848-1000 1,701.45 2.99 1800 65
12-1/2" 7-848-1200 1,934.22 4.05 1500 12015-3/4" 7-848-1600 2,622.60 5.35 1000 19420" 7-848-2000 6,907.02 7.48 500 33025" 7-848-2500 10,552.23 9.21 350 551
ChuckDia
Steel
PartNumber
RetailPrice
HoleDia RPM Wt
lbs8" 7-849-0800 1,851.33 2.17 2500 43.010" 7-849-1000 2,470.23 2.99 2000 68.3
12-1/2" 7-849-1200 3,112.14 4.05 1700 12416" 7-849-1600 5,016.00 5.35 1500 19820" 7-849-2000 8,755.32 7.48 1000 34225" 7-849-2500 13,848.60 9.92 750 573
4-Jaw Combination Lathe Chucks with Semi-Steel and Steel BodyType 4605
Type 4805
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 417
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CO
MB
INA
TIO
NLA
THE
CH
UC
KSP
AR
EPA
RTS
418 COMBINATION LATHE CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Combination Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Spare Parts
ChuckDia
Hard ReversibleJaws 4 Pc SetPart Number
RetailPrice
Hard Master Jaws4 Pc Set
Part Number
RetailPrice
Soft Solid Jaws4 Pc Set
Part Number
RetailPrice
Operating Screw1 Pc
Part Number
RetailPrice
5" 7-891-105 221.18 7-891-205 169.34 7-891-305 216.00 7-891-405 33.18
6" 7-891-106 432.00 7-891-206 181.09 7-891-306 220.35 7-891-406 35.94
8" 7-891-108 400.41 7-891-208 309.09 7-891-308 191.31 7-891-408 53.79
10" 7-891-110 441.53 7-891-210 360.39 7-891-310 230.22 7-891-410 68.88
12-1/2" 7-891-112 467.31 7-891-212 443.58 7-891-312 280.14 7-891-412 82.80
15-3/4" 7-891-116 835.44 7-891-216 574.74 7-891-316 402.12 7-891-416 97.08
20" 7-891-120 1,155.75 7-891-220 1,203.72 7-891-320 569.07 7-891-420 175.92
25" 7-891-125 1,666.68 7-891-225 1,399.17 7-891-325 809.19 7-891-425 213.06
ChuckDia
Scroll Plate1 Pc
Part Number
RetailPrice
Pinion1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
5" 7-887-305 125.79 7-886-305 31.35 – –
6" 7-887-306 148.29 7-886-306 33.51 – –
8" 7-887-308 180.27 7-886-308 40.32 7-891-908 41.58
10" 7-887-310 243.15 7-886-310 48.96 7-891-910 44.97
12-1/2" 7-887-312 321.87 7-886-312 59.58 7-891-912 52.86
15-3/4" 7-887-316 775.71 7-886-316 81.72 7-891-916 94.05
20" 7-887-320 1,665.90 7-886-320 239.767-891-925 106.98
25" 7-887-325 2,409.72 7-886-325 286.17
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:30 PM Page 418
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
419
IND
EPEND
ENT
CH
UC
KS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Independent Lathe Chucks• Steel and Semi-Steel body• Medium duty and heavy duty 4-jawindependent chucks are designed togrip round or odd shaped work
• Medium duty chucks have a Semi-Steelbody and hard solid reversible jaws
• BISON-BIAL’s 36" diameter chuck hastwo-piece hard reversible jaws
• Heavy duty chucks have a Steel bodyand two-piece hard reversible jaws
• Hard top and hard master jaws aremade of high quality Alloy Steel, thenhardened and ground
• Solid jaws are made of high qualityCarbon Steel, then hardened
• 4-Jaw Semi-Steel body lathe chuckscome with hard solid reversible jaws
Chucks with diameters ranging from10" to 49" have T-slots
Chucks with Solid Jaws Chucks with Two-Piece Reversible Jaws
1. Chuck Body2. Operating Screw, 7-890-6...3. Thrust Bearing, 7-890-7...4. Set Screw, 7-899-3...5. Hard Solid Jaws, 7-890-1...6. Chuck Mounting Bolts, 7-897-...7. ChuckWrench, 7-890-9...8. T-slot Screw
1. Chuck Body3. Operating Screw, 7-890-6...4. Thrust Bearing, 7-890-7...5. Set Screw, 7-899-3...6. Hard Master Jaws, 7-890-3...7. Hard Reversible Jaws, 7-890-2...8 and 9. Jaw Mounting Bolts10. Chuck Mounting Bolts, 7-897-...11. ChuckWrench, 7-890-9...12. T-slot Screw
Standard Accessories for Semi-Steel BodyChucks, 3-1/2" thru 32" Diameter
• 1 Set of hard solid reversible jaws• 1Wrench• 1 Set of clamping bolts
Standard Accessories for Steel BodyChucks, 8" thru 49" Diameter
• Two-piece reversible jaws(hard top jaws and hard master jaws)
• 1Wrench• 1 Set of clamping bolts
Optional Accessories
• Hard top jaws• Hard master jaws• Soft top jaws
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 419
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
S
420 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia A B C D E F G H
Number ofT-slots
B
Number ofSlots
E
10" 1.969 .551 .925 – – – .394 .945
4
–
12-1/2" 2.657.709 1.260
– – –.492 1.181
–
15-3/4" 3.543 – – – –
20" 4.134
.886 1.476
2.362.906 1.181
.630 1.378
8
25" 4.528 3.937
31-1/2" 5.315 4.331 1.063 1.969
36" 8.661
1.102 1.8113.937
1.102
3.839
.787 1.96939-3/8" 9.843 4.724
49" 12.598 5.118 5.906
ChuckDiaD
d1min
d2max
Chuck Thru Holed3
3-1/2" 0.118 3.346 0.984
5" 0.315 4.9213 1.0236
6-1/4" 0.315 6.2992 1.6535
8" 0.394 7.874 1.772
10" 0.394 9.843 2.362
12-1/2" 0.59 12.402 2.953
15-3/4" 0.787 15.748 3.74
20" 1.772 19.685 4.724
25" 1.969 24.803 6.102
31-1/2" 1.969 31.496 7.677
36" 4.724 36.024
7.4839-3/8" 6.693 39.37
49" 6.693 49.213
Clamping Ranges
See pages 428-431for backplates
Chuck GreasePart Number 7-799-025
See pages 432-433 for jawsSee pages 434-435 for spare parts
T-slot Dimensions for all4-Jaw Independent Lathe Chucks
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 420
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
421
IND
EPEND
ENT
CH
UC
KS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Steel Body Plain Back Chucks with Two-Piece Jaws• All chucks with diameters of10" through 49" have T-slots
L
All plain back chucks require backplatesthat need machining
* d1 is the maximum allowed through hole enlargement** The maximum load capacity per one chuck is rated for plain back, type A1/A2 and type D1 chucks*** The maximum RPM was estimated for round and centered workpieces ONLY, machined in plain back and direct mount chucks
The maximum load capacity and maximum RPM have been calculated per the following conditions:• Workpiece is supported by a live center• Workpiece is gripped with two chucks
NOTE: BISON-BIAL does not recommend any chuck alterations
See page 430 for generalinstructions on how to select a backplatefor your chuck
See pages 428-431 for backplate /recommendations
See page 385 for backplatemounting instructions
ChuckDia
PartNumber
RetailPrice
LoadCapacity
**
RPMmax***
HoleDiad
d1* E F C H h1 Wtlbs
8" 7-855-0800 1,233.72 1700 2500 1.9685 1.9685 4.3307 3.2520 .1969 3.1496 1.8268 35
10" 7-855-1000 1,393.92 2800 2000 2.5591 2.9528 5.9055 4.1260.2756
3.3465 2.3780 59
12-1/2" 7-855-1200 2,432.46 4290 1500 3.1496 3.7402 6.8898 5.2520 3.7402 2.3976 95
15-3/4" 7-855-1600 2,321.73 8600 1100 3.9370 4.7244 7.8740 6.7480 .3937 4.1339 2.8465 150
20" 7-855-2000 4,305.57 12900 700 4.9213 6.102410.6299 9.2520
.4724
4.7244 3.551 250
25" 7-855-2500 6,227.85 18600 550 6.2992 6.8898 5.5118 3.8504 390
32" 7-855-3200 10,223.25 24300 450 7.8740 7.8740 14.9606 13.0000 6.2992 3.6929 750
36" 7-855-3600 13,544.88 27170 200
7.4803 10.514.5669 12.9921
.70906.6929
4.0472
856
40" 7-855-4000 16,881.12 32900 200 1367
49" 7-855-4900 23,010.87 37600 150 21.6535 19.6850 7.4803 2138
ChuckDia
Chuck Mounting Bolts
PartNumber
RetailPrice
ThreadM L Qty
per Set
8" 7-897-5215.60
7/16 - 14 2-3/4
4
10" 7-897-533 1/2 - 13 3-1/4
12-1/2"7-897-545 6.81 5/8 - 11 3-1/2
15-3/4"
20" 7-897-563 16.673/4 - 10
4
25" 7-897-565 20.00 5
32" 7-897-574 20.03 7/8 - 9 6
36"
7-897-589 13.82 1 - 8 7 840"
49"
Type 4303
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 421
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
S
422 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Semi-Steel Body Plain Back Chucks with Solid and Two-Piece Jaws• All chucks with diameters of 10" through 49" have T-slots• Chucks with 3", 4", 5", and 6" diameters are made of Steel
L
All plain back chucks require backplatesthat need machining
* d1 is the maximum allowed through hole enlargement** The maximum load capacity per one chuck is rated for plain back, type A1/A2 and type D1 chucks*** The maximum RPM was estimated for round and centered workpieces ONLY, machined in plain back and direct mount chucks
The maximum load capacity and maximum RPM have been calculated per the following conditions:• Workpiece is supported by a live center• Workpiece is gripped with two chucks
NOTE: BISON-BIAL does not recommend any chuck alterations
ChuckDiaD
Chuck Mounting Bolts
PartNumber
RetailPrice Thread M L Qty
per Set
3-1/2"7-897-498 8.99 1/4-20 1-1/4
4
4"
5" 7-897-508 6.91 5/16-181-3/4
6-1/4" 7-897-514 9.60 3/8-16
8" 7-897-521 5.60 7/16-14 2-3/4
10" 7-897-533 5.60 1/2-13 3-1/4
12-1/2"7-897-545 6.81 5/8-11 3-1/2
15-3/4"
20" 7-897-563 16.673/4-10
4
25" 7-897-565 20.00 5
32"7-897-574 20.03 7/8-9 6
32"/T
36" 7-897-589 13.82 1-8 7 8
Type 4304
See page 430 for general instructions onhow to select a backplate for your chuck
See pages 428-431 for backplaterecommendations
See page 385 for backplatemounting instructions
ChuckDiaD
SolidJaws
RetailPrice 2-Piece Jaws Retail
PriceLoad
Capacity**
RPMmax***
HoleDia d
d1* E F C H h h1 Wt
lbsPart Number
3-1/2" 7-850-0300 499.11 – –33 4000 0.9843 0.9843
2.4409 2.8346 0.19691.5748
0.6693 – 3.4
4" 7-850-0400 544.00 – 3.12522.1260
0.0984
0.0669 5.3
5" 7-850-0500 581.13 – – 330 3500 1.0236 1.3780 2.75001.6929 0.7874
– 8
6-1/4" 7-850-0600 615.66 – – 550 3200 1.6535 1.8504 3.2500 2.7500 – 9
8" 7-850-0800 558.60 – – 1320 1800 1.9685 1.9685 4.3307 3.2520 0.1969 3.14961.5866
– 32
10" 7-850-1000 646.65 – – 2200 1500 2.5591 2.9528 5.9055 4.12600.2756
3.3465 – 55
12-1/2" 7-850-1200 865.77 – – 3300 1200 3.1496 3.7402 6.8898 5.2520 3.74021.9606
– 88
15-3/4" 7-850-1600 1,165.50 – – 6600 800 3.9370 4.7244 7.8740 6.7480 0.3937 4.1339 – 139
20" 7-850-2000 1,841.82 – – 9900 500 4.9213 6.102410.6299 9.2520
0.4724
4.7244 2.3453 – 231
25" 7-850-2500 2,637.87 – – 14300 400 6.2992 6.8898 5.5118 2.3543 – 364
32" 7-850-3200 4,526.10 – –18700 300
7.8740 7.874014.9606 13.0000 6.2992 2.7874 –
700
32"/T 7-850-3300 4,825.26 – – 10.4725 10.4725 672
36" – – 7-850-3622 8,732.64 20900 150 7.4803 10.5000 14.5669 12.9921 0.7090 6.6929 – 4.0472 800
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 422
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
423
IND
EPEND
ENT
CH
UC
KS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Steel Body, Type A1/A2 Direct Mount with Two-Piece Jaws• Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper, either an A1 or A2 chuck will fit• Type A2 spindle has a 1 bolt pattern, outside the taper, only an A2 chuck will fit
L
Type A
* d1 is the maximum allowed through hole enlargement** The maximum load capacity per one chuck is rated for plain back, type A1/A2 and type D1 chucks***The maximum RPM was estimated for round and centered workpieces ONLY,
machined in plain back and direct mount chucksThe maximum load capacity and maximum RPM have been calculated per the following conditions:
• Workpiece is supported by a live center• Workpiece is gripped with two chucks
NOTE: BISON-BIAL does not recommend any chuck alterations
ChuckDiaD
TaperSize
PartNumber
RetailPrice
LoadCapacity
lbs**
RPMmax***
HoleDiad
d1* B (A-2) G C H h1 Wtlbs
8" A2-6 7-856-0816 1,431.42 1700 2500 1 .969 1.9685 5.2500 4.1878 .6693 3.1496 1.8268 41
10" A2-6 7-856-1016 1,586.66 2800 2000 2 .559 2.9528 5.2500 4.1878 .6693 3.3465 2.3780 60
12-1/2"A2-6 7-856-1216 1,986.84
42901500 3 .150 3.7402 5.2500 4.1878 .6693
3.7402 2.397694
A2-8 7-856-1218 2,892.36 – – – 6.7500 5.50055 .7480 –
15-3/4"
A2-6 7-856-1616 2,527.98
8600 1100 3 .937
3.9370 5.2500 4.1878 .6693
4.1339 2.8465 153A2-8 7-856-1618 2,527.984.7244
6.7500 5.50055 .7480
A2-11 7-856-1619 2,527.98 9.2520 7.75055 .8268
20"
A2-8 7-856-2018 4,354.83
12900 700 4 .921 6.1024
6.7500 5.50055 .7480
4.7244 3.551 269A2-11 7-856-2019 4,375.23 9.2520 7.75055 .8288
A2-15 7-856-2020 4,765.86 13.0000 11.2505 .8661
25"
A2-11 7-856-2519 6,961.65
18600 5506.299
6.8898
9.2520 7.75055 .8268
5.5118 3.8504 389A2-15 7-856-2520 6,978.5713.0000 11.2505 .8661
A2-15 7-856-2522 7,048.56 10.473
32"
A2-11 7-856-3219 10,545.69
24300 450
6.299 7.0866 9.25207.75055 .8268
6.29923.6929
719
A2-15 7-856-3220 10,545.69 7.87 11.0 13.0000
A2-20 7-856-3229 10,689.72 10.50
16.0 18.2500 16.251 .8661A2-20 7-856-3225 10,571.34 12.50
A2-20 7-856-3223 10,879.26 14.50
40" A2-15 7-856-4015 18,324.72 32900 200 7.50 11.0 13.0000 11.2505 .8661 6.6929 4.0472 900
Spindle Mounting Bolts
PartNumber
RetailPrice Thread L Qty
7-897-533 5.60 1/2 - 13 3-1/44
7-897-533 5.60 1/2 - 13 3-1/4
7-897-534 5.60 1/2 - 133-1/2
8
7-897-545 6.81 5/8 - 11 4
7-897-535 11.14 1/2 - 13
4
8
7-897-547 7.38 5/8 - 114
7-897-563 16.67 3/4 - 10
7-897-550 4.62 5/8 - 11
4-1/28
7-897-564 11.05 3/4 - 10
7-897-570 10.27 7/8 - 9 4
7-897-566 16.19 3/4 - 10
5-1/2
8
7-897-571 16.19 7/8 - 9 4
7-897-567 14.83 3/4 - 10 6 6
7-897-574 20.03 7/8 - 9 6 8
7-897-584 20.16 1 - 8 6 4
7-897-580 47.76 7/8 - 9 7 8
Type 4313
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 423
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
S
424 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
A Type
ChuckDiaD
TaperSize
PartNumber
RetailPrice
LoadCapacity
lbs**
RPMmax***
HoleDiad
d1* B(A-2) G C H h Wt
lbs
8"A2-5 7-851-0815 673.11
1320 1800 1.969 1.96854.1250 3.2503 .6299
3.1496 .7874 38A2-6 7-851-0816 673.11 5.2500 4.1878 .6693
10"
A2-5 7-851-1025 784.17
2200 1500 2 .559 2.9528
4.1250 3.2503 .6299
3.3465 1.5866 56A2-6 7-851-1016 784.17 5.2500 4.1878 .6693
A2-8 7-851-1018 646.74 6.7500 5.50055 .7480
12-1/2"
A2-5 7-851-1215 1,011.63
3300 1200 3.150
3.1496 4.1250 3.2503 .6299
3.7402 1.5856 88A2-6 7-851-1226 1,053.90 3.7402 5.2500 4.1878 .6693
A2-8 7-851-1218 1,012.80 3.7402 6.7500 5.50055 .7480
15-3/4"
A2-6 7-851-1626 1,339.35
6600 800 3 .937
3.9370 5.2500 4.1878 .6693
4.1339 1.9606 143A2-8 7-851-1628 1,358.61 4.7244 6.7500 5.50055 .7480
A2-11 7-851-1619 1,410.51 4.7244 9.2520 7.75055 .8268
20" A2-11 7-851-2019 2,235.66 9900 500 4 .921 6.1024 9.2520 7.75055 .8288 4.7244 1.9606 251
25" A2-11 7-851-2519 2,994.33 14300 400 6.299 6.8898 9.2520 7.75055 .8268 5.5118 2.3543 364
32"A2-11 7-851-3219 5,456.61
18700 3006.299 7.0866 13.0000 7.75055 .8268
6.2992 2.7874 672A2-20 7-851-3220 5,456.61 12.60 13.78 18.2500 11.2505 .8661
Spindle Mounting Bolts
PartNumber
RetailPrice Thread L Qty
7-897-522 5.60 7/16 - 14 3-1/84
7-897-533 5.60 1/2 - 13 3-1/4
7-897-522 5.60 7/16 - 14 3-1/8
87-897-533 5.60 1/2 - 13 3-1/4
7-897-545 6.81 5/8 - 11 3-1/2
7-897-523 10.11 7/16 - 14
3-1/2 47-897-534 5.60 1/2 - 13
7-897-545 6.81 5/8 - 11
7-897-535 11.14 1/2 - 13
4 87-897-547 7.38 5/8 - 11
7-897-563 16.67 3/4 - 10
7-897-564 11.05 3/4 - 10 4-1/2 8
7-897-566 16.19 3/4 - 10 5-1/2 8
7-897-574 20.03 7/8 - 96 8
7-897-584 20.16 1 - 8
L
4-Jaw Semi-Steel Body, Type A1/A2 Direct Mount with Hard Solid Jaws• Type A1 spindle has a 2 bolt hole pattern, inside and outside the taperEither an A1 or A2 chuck will fit
• Type A2 spindle has a 1 bolt pattern outside the taperOnly an A2 chuck will fit
* d1 is the maximum allowed through hole enlargement** The maximum load capacity per one chuck is rated for plain back, type A1/A2 and type D1 chucks***The maximum RPM was estimated for round and centered workpieces ONLY, machined in plain back and direct mount chucksThe maximum load capacity and maximum RPM have been calculated per the following conditions:
• Workpiece is supported by a live center• Workpiece is gripped with two chucks
NOTE: BISON-BIAL does not recommend any chuck alterations
Type 4314
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 424
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
425
IND
EPEND
ENT
CH
UC
KS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Steel Body, Type D1 Direct Mount Chucks with Two-Piece Jaws
ChuckDiaD
TaperSize
PartNumber
RetailPrice
LoadCapacity
lbs**
RPMmax***
HoleDiad
d1* G B C H h1 Wtlbs
8"D1-4 7-857-0834 1,337.13
1700 2500 1.9685 1.96852.5005 3.2520 .5118
3.1495 1.8268 40D1-5 7-857-0835 1,270.58 3.2505 4.1260 .5906D1-6 7-857-0836 1,595.82 4.1880 5.2520 .6299
10"D1-5 7-857-1035 1,556.94
2800 2000 2.5591 2.95283.2505 4.1260 .5906
3.3465 2.378 65D1-6 7-857-1036 1,556.94 4.1880 5.2520 .6299D1-8 7-857-1038 1,702.74 5.5007 6.7480 .7087
12-1/2"D1-6 7-857-1236 2,364.36
4290 1500 3.1496 3.77954.1880 5.2520 .6299
3.7402 2.3976 93D1-8 7-857-1238 2,372.52 5.5007 6.7480 .7087
15-3/4"
D1-6 7-857-1636 3,128.22
8600 1100 3.9370
3.9370 4.1880 5.2520 .6299
4.1339 2.8465 141D1-8 7-857-1638 3,444.18 4.7244 5.5007 6.7480 .7087D1-11 7-857-1639 3,199.11 5.5000
7.7507 9.2520 .7874D1-11 7-857-1643 3,232.35 5.5000
20"D1-8 7-857-2038 5,219.82
12900 700 4.9215.3150 5.5007 6.7480 .7087
4.7244 3.551 226D1-11 7-857-2039 5,219.82 6.1024 7.7505 9.2520 .7874
25"D1-8 7-857-2538 6,746.13
18600 5504.9213 5.3150 5.5007 6.7480 .7087
5.5118 3.8504 389D1-11 7-857-2539 6,964.83 6.2992 6.8898 7.7507 9.2520 .7874
32" D1-11 7-857-3239 10,301.70 24300 450 7.0866 7.4803 7.7507 9.2520 .7874 6.2992 3.6929 900
Set Screw
PartNumber
RetailPrice
7-899-30512.51
7-899-310
7-899-305
12.517-899-310
ChuckDiaD
TaperSize
Camlock Studs
PartNumber
RetailPrice Dia Thread Qty
8"D1-4 7-899-104 22.77 5/8 M10x1
6
D1-5 7-899-105 25.02 3/4 M12x1D1-6 7-899-106 28.92 7/8 M16x1.5
10"D1-5 7-899-105 25.02 3/4 M12x1D1-6 7-899-106 28.92 7/8 M16x1.5D1-8 7-899-108 33.27 1 M20x1.5
12-1/2"D1-6 7-899-106 28.92 7/8 M16x1.5D1-8 7-899-108 33.27 1 M20x1.5
15-3/4"D1-6 7-899-106 28.92 7/8 M16x1.5D1-8 7-899-108 33.27 1 M20x1.5D1-11 7-899-111 45.84 1-3/16 M22x1.5
20"D1-8 7-899-108 33.27 1 M20x1.5D1-11 7-899-111 45.84 1-3/16 M22x1.5
25"D1-8 7-899-108 33.27 1 M20x1.5D1-11 7-899-111 45.84 1-3/16 M22x1.5
32" D1-11 7-899-111 45.84 1-3/16 M22x1.5
D Type
* d1 is the maximum allowed throughhole enlargement
** The maximum load capacity per onechuck is rated for plain back, type A1/A2and type D1 chucks
***The maximum RPM was estimated forround and centered workpieces ONLY,machined and centered workpiecesONLY, machined in plain back anddirect mount chucksThe maximum load capacity andmaximum RPM have been calculatedper the following conditions:• Workpiece is supported by a live center• Workpiece is gripped with two chucks
NOTE: BISON-BIAL does not recommend anychuck alterations
Type 4343
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 425
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
S
426 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Set Screw
PartNumber
RetailPrice
7-899-305 12.51
7-899-305 12.51
7-899-310 12.51
7-899-310 12.51
7-899-310 12.51
7-899-310 12.51
7-899-310 12.51
ChuckDiaD
Camlock Studs
TaperSize
PartNumber
RetailPrice Dia Thread Qty
8"
D1-3 7-899-103 21.48 9/16 M10x13
D1-4 7-899-104 22.77 5/8 M10x1
D1-5 7-899-105 25.02 3/4 M12x1 6
10"
D1-4 7-899-104 22.77 5/8 M10x1 3
D1-5 7-899-105 25.02 3/4 M12x16
D1-6 7-899-106 28.92 7/8 M16x1.5
12-1/2"D1-6 7-899-106 28.92 7/8 M16x1.5
6D1-8 7-899-108 33.27 1 M20x1.5
15-3/4"
D1-6 7-899-106 28.92 7/8 M16x1.5
6D1-8 7-899-108 33.27 1 M20x1.5
D1-11 7-899-111 45.84 1-3/16 M22x1.5
20"D1-8 7-899-108 33.27 1 M20x1.5
6D1-11 7-899-111 45.84 1-3/16 M22x1.5
25" D1-11 7-899-111 45.84 1-3/16 M22x1.5
ChuckDiaD
TaperSize
PartNumber
RetailPrice
HoleDiad
d1* G B C H h Wtlbs
8"
D1-3 7-853-0833 707.31
1.9685 1.9685
2.1250 2.7795.5118
3.1495 0.7874 37D1-4 7-853-0834 701.49 2.5005 3.2520
D1-5 7-853-0835 726.27 3.2505 4.1260 .5906
10"
D1-4 7-853-1034 833.73 2.3622 2.3622 2.5005 3.2520 .5118
3.3465 1.5866 61D1-5 7-853-1035 850.052.5591 2.9528
3.2505 4.1260 .5906
D1-6 7-853-1036 850.05 4.1880 5.2520 .6299
12-1/2"D1-6 7-853-1236 1,104.12
3.1496 3.77954.1880 5.2520 .6299
3.7402 1.5866 87D1-8 7-853-1238 1,094.22 5.5007 6.7480 .7087
15-3/4"
D1-6 7-853-1636 1,410.18
3.9370
3.9370 4.1880 5.2520 .6299
4.1339 1.9606 132D1-8 7-853-1638 1,410.184.7244
5.5007 6.7480 .7087
D1-11 7-853-1639 1,483.65 7.7507 9.2520 .7874
20"D1-8 7-853-2038 2,229.30
4.92135.3150 5.5007 6.7480 .7087
4.7244 1.9606 211D1-11 7-853-2039 2,357.61 6.1024 7.7505 9.2520 .7874
25" D1-11 7-853-2539 3,323.67 6.2992 6.8898 7.7507 9.2520 .7874 5.5118 2.3543 364
D Type
4-Jaw Semi-Steel Body, Type D1 Direct Mount Chuckswith Hard Solid Jaws
* d1 is the maximum allowed through hole enlargement
Type 4344
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 426
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
427
IND
EPEND
ENT
CH
UC
KS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Semi-Steel Body, Type L Direct Mount Chuckswith Hard Solid Jaws
ChuckDia
TaperSize
PartNumber
RetailPrice
HoleDiad
d1* ThreadT G C J K H Wt
lbs
8"L00 7-854-0841 723.33
1.9685 1.96853-3/4 - 6 2.75 2.125 .5512
.38394.005
34L0 7-854-0842 761.25 4-1/2 - 6 3.25 2.500 .5905 4.449
10"
L00 7-854-1041 872.79
2.5591
2.5591 3-3/4 - 6 2.7500 2.1250 .5512.3839
4.055
57L0 7-854-1042 815.942.9528
4-1/2 - 6 3.2500 2.5000 .5905 4.449
L1 7-854-1043 826.71 6 - 6 4.1250 2.9921 .6299 .6358 4.961
12-1/2"
L0 7-854-1242 1,130.37
3.1496
3.3465 4-1/2 - 6 3.2500 2.5000 .5905 .3839 4.724
119L1 7-854-1243 1,112.58 3.7795 6 - 6 4.1250 2.9921 .6299 .6358 5.197
L2 7-854-1244 1,179.36 3.6220 7-3/4 - 5 5.2500 3.5039 .8661 .7598 5.709
15-3/4"L1 7-854-1643 1,540.62
3.93704.1339 6 - 6 4.1250 2.9921 .6299 .6358 5.197
154L2 7-854-1644 1,540.62 4.7244 7-3/4 - 5 5.2500 3.5039 .8661 .7598 5.709
20" L2 7-854-2044 2,501.73 4.9213 5.3150 7-3/4 - 5 5.2500 3.5039 .8661 6.0630 6.063 256
* d1 is the maximum allowed through hole enlargement
L Type
Type 4354
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 427
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
BA
CK
PLA
TES
428 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Backplates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Rough Threaded Backplates for Independent Chucks
ChuckDia
PartNumber
RetailPrice D* d D1 K L Wt
lbs
8" 7-870-308 97.14 5.12 1.18 3.74 1.38 2.56 11
10" 7-870-310 107.88 7.09 1.57 4.72 1.97 3.35 25
12-1/2" 7-870-312 141.12 8.66 2.17 5.51 2.36 3.74 49
* Backplate OD has to be turned down to fit chuck counterboreSee pages 421-422 for plain back chuck dimensions
Type 8262
Semi-Finished Threaded Backplates
* Backplate OD has to be turned down to fit chuck counterboreSee pages 421-422 for plain back chuck dimensions
RecommendedChuck Dia
ThreadM
PartNumber
RetailPrice D* A B C h E Wt
lbs
4" - 5"1 - 10 7-871-041 101.10
4.095 1.5352.165 1.01500
.709 .5000 81-1/2 - 8 7-871-042 101.10 2.677 1.51421
6" - 8"1 - 10 7-871-051 103.95
5.079 1.5352.165 1.01500
.709 .5000 101-1/2 - 8 7-871-052 103.95 2.677 1.51421
8"1-1/2 - 8 7-871-062 115.11
6.5351.535
3.1891.51421
.787.5000
122-1/4 - 8 7-871-063 115.11 1.791 2.26000 .6260
10"1-1/2 - 8 7-871-082 132.81
8.1101.535
3.5831.51421
.866.5000 12
2-1/4 - 8 7-871-083 132.81 1.791 2.26000 .6260 13
10" - 12-1/2"2-1/4 - 8 7-871-103 199.50
10.0791.791
4.1732.26000
.984.6260 22
2-3/8 - 6 7-871-104 199.50 2.047 2.38500 .7480 25
12-1/2"2-3/8 - 6 7-871-124 264.93
12.638 2.047 4.3312.38500
1.102 .7480 332-3/4 - 8 7-871-125 189.96 2.76000
Type 8206
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 428
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
429
IND
EPEND
ENT
CH
UC
KB
AC
KPLA
TES
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Backplates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
RecommendedChuck
Dia
TaperSize
PartNumber
RetailPrice
Backplate*ODA
BHoleDiaC
D E Wtlbs
10" A-5 7-873-085 184.56 7.99 1.5 2.17 4.1250 3.2503 19
10" - 12-1/2" A-6 7-873-086 184.80 7.99 1.3 2.17 5.2500 4.1878 15.5
15-3/4"A-6 7-873-106 239.82
9.961.3
3.175.2500 4.1878 38
A-8 7-873-108 255.54 1.97 6.7500 5.50055 33
20" A-6 7-873-126 318.57 12.52 1.3 4.06 5.2500 4.1878 45
20" - 25"A-8 7-873-128 337.32 12.52 2.17 4.06 6.7500 5.50055 62
A-11 7-873-169 549.63 15.94 2.95 5.36 9.2520 7.75055 141
32" A-11 7-873-209 819.24 19.88 1.77 7.59 9.2520 7.75055 133
36", 40" A-15 7-873-3615 1,780.83 21.85 2.78 7.48 13.0000 11.2505 242
49" A-20 7-873-3620 1,825.74 21.85 3.15 7.48 18.2500 16.251 249
Semi-Machined Type A1/A2 Backplates• For plain back chucks• Designed for direct mounting on A1 and A2 spindle nose• May be used for both scroll and independent chucks• See mounting instructions on page 385
* Backplate OD has to be turned down to fit chuck counterbore
See pages 421-422 for plain back chuck dimensions
Type 8212
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 429
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
BA
CK
PLA
TES
430 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Backplates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Semi-Machined Type D1 Backplates• The number of camlock studs needed varies depending on the spindle size, please refer to the table below• Plain back chucks require backplates which may require machining to fit• Type 8242 Backplates are semi-machined for BISON-BIAL plain back chucks• Designed for direct mounting on camlock spindle nose
RecommendedChuck
Dia
TaperSize
PartNumber
RetailPrice
Backplate*ODA
CamlockStudDia
Numberof
Studs
HoleDiaC
D GFlange
ThicknessB
Wtlbs
3" thru 8" D1-3 7-878-0530 164.345.0000
9/16
31.000
2.7820 2.1250 2.00006.0
3" thru 8" D1-4 7-878-0540 164.345/8 3.2520
2.5000 1.1800
8" D1-4 7-878-0840 290.61 8.00 2.40 2.5005 1.73 27
15-3/4" D1-6 7-878-1260 438.66
12.52
7/8
6
4.06 5.2520 4.1880 2.76
4920" D1-8 7-878-1280 470.19 1 5.35 6.7480 5.50072.17
25" D1-11 7-878-1290 491.281-3/16 7.59 9.2520 7.7505
32-1/2" - 36" D1-11 7-878-2090 1,173.21 19.88 2.83 159
* Backplate OD has to be turned down to fit chuck counterbore
See pages 421-422 for plain back chuck dimensions
Chuck and Backplate Selection InstructionThe back plate OD (size A) should match the plain back chuck counter bore diameter (size E), see pages 421-422. Check the back platethru hole diameter (size C) and compare it with the chuck bolt circle diameter (size F). Be sure that you have enough room on the backplate body to drill and tap the chuck mounting holes. In the case of “A”, “D”, and “C” backplates, be sure that the chuck mounting boltswill not interfere with the spindle mounting bolts or camlock studs (diameter D). It is recommended that the plain back chuck bolt circlediameter (size E) be larger than the spindle mounting bolt/camlock stud circle diameter (size D).
Type 8242
Camlock Studs and Set Screws• Sold by piece
TaperSize
Camlock Studs
Part Number Retail Price Dia Thread
D1-3 7-899-103 21.48 9/16"M10 x 1
D1-4 7-899-104 22.77 5/8"
D1-5 7-899-105 25.02 3/4" M12 x 1
D1-6 7-899-106 28.92 7/8" M16 x 1.5
D1-8 7-899-108 33.27 1" M20 x 1.5
D1-11 7-899-111 45.84 1-3/16" M22 x 1.5
D1-15 7-899-115 103.20 1-3/8" M24 x 1.5
Set Screw
Part Number Retail Price Number of Studs
7-899-305 12.513
67-899-310 12.51
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 430
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
431
IND
EPEND
ENT
CH
UC
KB
AC
KPLA
TES
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Backplates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
TaperSize
PartNumber Retail Price
Backplate*ODA
HoleDiaC
D GFlange
ThicknessB
Wtlbs
12-1/2" C-6 7-921-1060 246.06 9.96 4.06 5.2500 4.1880 1.93 35
15-3/4"C-6 7-921-1260 287.07
12.524.06 5.2500 4.1880 2.76
49C-8 7-921-1280 315.51 5.35 6.7500 5.50075 2.17
20" - 25" C-11 7-921-1290 408.39 12.52 7.59 9.2520 7.75075 2.17 49
32" - 36" C-11 7-921-2590 1,283.67 25 7.59 9.2520 7.75075 2.83 232
ChuckDia
Studs
PartNumber Retail Price Number
of Studs inch mm Threadmm
12-1/2" 7-921-906 14.46 4 .8465 21.5 M12 - 50
15-3/4"7-921-906 14.46 4 .8465 21.5 M12 - 50
7-921-908 17.40 4 1.063 27.0 M16 - 60
20" - 25" 7-921-911 24.45 6 1.339 34.0 M20 - 75
32" - 36" 7-921-911 24.45 6 1.339 34.0 M20 - 75
DIN 55027 Semi-Machined Type C Spindle Backplates
* Backplate OD has to be turned downto fit chuck counterbore
See pages 421-422 for plain back chuckdimensions
Type 8232
ChuckDia
BackplatePart Number Retail Price Shank
FlangeDiaD
HoleDiad
L Thread
3" and 4" 7-909-304 220.35
5C
4"
.866 4.41 1-1/4 - 205" and 6" 7-909-305 229.25 5"
ChuckPart Number Retail Price
7-850-0300 499.11
7-850-0500 581.13
7-850-0600 615.66
5C Semi-Finished Backplates• Designed for use with self-centering orindependent lathe chucks
• Made of high quality Forged Steel• 5C shank is hardened and precisionground for maximum accuracy
• Soft flange• BISON-BIAL chucks and 5C backplatesprovide accuracy not available with standardand precision 5C collets
Type 8289
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 431
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
JAW
S
432 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Chuck Jaws
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber
RetailPrice A B C D D1 E G H K L M N O O1
8" 7-890-208 129.121.3386
1.3858 .4996 .4331 .6693
.1260
.3130 1.7126 .8760 3.2283 .7874 1.2598 .3740 .4134
10" 7-890-210 122.37 1.5748
.7496
.5512 .8268
.5004
2.0276 1.0630 3.7992 1.0236 1.4567 .4724 .5118
12-1/2" 7-890-212 142.621.6535
1.8858 2.1654 1.2500 4.4291 1.1811 1.6929 .5118 .5512
15-3/4" 7-890-216H 171.87 2.2598 .7087 1.0236
.2480
2.5394
1.500
5.0787 1.9409 1.3760 .5315 .5709
20"7-890-220H 240.51 2.1260
2.2835 .8661 1.2598
3.22635.3150 2.0866 1.2598
.8268 .826825"
32" 7-890-232H 357.702.8346
3.4647 1.1024 .9449
36", 40", 49" 7-890-249H 411.36 3.8190 6.2992 2.3622 – 1.9685 –
8" to 10"Diameters
20"Diameter
36" to 49"Diameters
12" and 16"Diameters
25" to 32"Diameters
ChuckDia
PartNumber
RetailPrice A B C E F G H J K L M N
8" 7-890-308 73.111.2598
1.3071 0.4996
0.15750.3937
0.3126 1.25980.3425
0.8760 3.1102 3/8-16Tr 28x5
10" 7-890-310 82.02 1.4764
0.7496 0.500
1.4961 1.0630 3.70081/2-13
12-1/2" 7-890-312 100.381.5748
1.78740.4724
1.53540.3819
1.2500 4.3307Tr 32x6
15-3/4" 7-890-316 146.91 2.1614
0.2835
1.7321
1.500
5.0787 5/8-11
20" 7-890-320 184.652.0472
2.18500.5906
2.3228
0.46066.6142
3/4-10
Tr 36x6
25" 7-890-325 244.178.1102
Tr 40x6
32" 7-890-332 484.422.7559 0.7874 0.6181
Tr 44x8
36", 40", 49" 7-890-336 579.68 2.1850 9.6063 Tr 44x6
Hard Master Jaws• Sold by the piece
Hard Top Reversible Jaws• Sold by the piece
8" to 12-1/2"Chuck Diameters
15-3/4" to 40"Chuck Diameters
49" Chuck Diameter
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:31 PM Page 432
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
433
IND
EPEND
ENT
CH
UC
KJA
WS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Chuck Jaws
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Hard Solid Jaws
ChuckDia
Part Number4 Pc Set
RetailPrice
Part Number1 Pc
RetailPrice A B C D
Thread H E
3-1/2" 7-890-103 214.14 7-890-1030 53.221.3385 1.1800 0.5100 Tr 16x2 left .1969 .1772
4" 7-890-104 219.69 7-890-1040 49.98
5"7-890-106 245.94 7-890-1060 59.55 2.0078 1.3583 0.6299 Tr 18x4 left .1968 .2362
6-1/4"
8" 7-890-108 300.66 7-890-1080 73.86 3.18902.4803 1.2598 Tr 28x5 left .3937 .3425
10" 7-890-110 356.73 7-890-1100 86.30 3.7992
12-1/2" 7-890-112 435.27 7-890-1120 105.50 4.37003.0118 1.5748 Tr 32x6 left .4724 .3819
15-3/4" 7-890-116 629.82 7-890-1160 149.76 5.0787
20" 7-890-120 880.44 7-890-1200 208.86 6.00393.6811 2.0472
Tr 36x6 left.5905 .4606
25" 7-890-125 1,271.76 7-890-1250 302.62 6.9685 Tr 40x6 left
32" 7-890-132 1,882.77 7-890-1320 447.33 7.9527 4.5078 2.7552 Tr 44x8 left .7874 .6181
Medium and Heavy Duty Soft Top Jaws• All top jaws are American Standard tongue and groove• Sold by the piece
ChuckDia
MediumPart
Number
RetailPrice
HeavyDutyPart
Number
RetailPrice A
3 and4-Jaw
B
2-Jaw*B C D E F G H I J
BoltSizeM
3-Jaw
Wtlbs
5" 7-884-305 16.00 – – 2.520 0.866 – 1.520
.3129
0.5910 1-1/4
.500
1.000
.1260.283
5/16-18 .66
6-1/4" 7-884-306 18.90 7-884-206 39.65 3.071 1.0001.575
1.634 0.8386 1-1/2 1.3393/8-16
1.01
8" 7-884-308 21.40 7-884-208 34.69 3.543 1.063 1.713 0.9488 1-3/4 1.575 1.43
10" 7-884-310 31.10 7-884-210 51.36 4.173 1.280 1.850 2.028
.5000
1.0827 2-1/8
.750
1.7721/2-13
2.54
12-1/2" 7-884-312 42.10 7-884-212 69.38 4.724 1.457 2.047 2.165 1.2087 2-1/2 2.087
.2480
3.53
15-3/4" 7-884-316 54.40 7-884-216 90.535.512
1.654 2.047 2.539
1.35433
2.480.406
5/8-11 4.85
20" 7-884-320 115.78 – – 1.654 – 2.933
3/4-10
5.29
25”and 32” 7-884-325 165.63 – – 6.299 2.047 – 3.288 9.26
36", 40",and 49"
7-884-332 321.15 – – 6.299 2.835 – 3.819 1.1583 2.284 16.00
* Designed for 2-jaw chucks, these jaws can be used as heavy duty jaws on 3 and 4-jaw chucks
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 433
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IND
EPEN
DEN
TC
HU
CK
SPA
RE
PAR
TS
434 INDEPENDENT CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Independent Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Thrust Bearing
PartNumber Retail Price OD OAL
7-890-703 19.86 .51 .87
– – – –
7-890-706 24.18 .71 1.04
7-890-708 27.481.18
1.91
7-890-710 30.72 2.11
7-890-712 37.141.42
2.32
7-890-716 44.16 2.52
7-890-720 53.16 1.57 2.84
7-890-725 68.82 1.77 3.15
7-890-732 78.81 1.89 3.52
7-890-736 88.47 1.89 4.33
ChuckDia
Operating Screw
PartNumber Retail Price OD OAL
3-1/2" 7-890-603 38.94.630
1.14
4" 7-890-604 40.35 1.319
5"7-890-606 41.85 .709 1.57
6-1/4"
8" 7-890-608 41.851.1
2.83
10" 7-890-610 46.92 3.15
12-1/2" 7-890-612 50.761.26
4.13
15-3/4" 7-890-616 63.21 5.31
20" 7-890-620 83.04 1.42 6.57
25" 7-890-625 113.37 1.57 8.74
32" 7-890-632 158.221.73
11.6
32"/T 7-890-633 167.17 10.2
36" 7-890-636 189.27
1.73
12.7
40" 7-890-640 213.09 13.8
49" 7-890-649 277.63 18.4
ChuckDia
WrenchPart Number Retail Price Square
Size
3-1/2"7-889-003 25.74 .2362
4"
5"7-890-906 30.87 .2755
6-1/4"
8"7-890-910 41.85 .433
10"
12-1/2"7-890-916 43.26 .5512
15-3/4"
20"7-890-925 100.26 .6693
25"
32"
7-890-932 131.22 .74836"
40"
49"
Spare Parts• Sold by the piece
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 434
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
435
IND
EPEND
ENT
CH
UC
KSPA
RE
PAR
TS
Quality Products • Partnership • Industry Experts INDEPENDENT CHUCKS
Prices are subject to change without notice
Independent Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Mounting Bolts for Hard and Soft Top Jaws• Sold by the piece
ChuckDia
BoltThread
Screw Number 1 Screw Number 2
Part Number Retail Price L Part Number Retail Price L
8" 3/8-16 7-897-510 9.41 3/4" 7-897-512 10.05 1-1/4"
10 & 12" 1/2-13 7-897-530 10.08 1" 7-897-531 10.08 1-1/2"
16" 5/8-11 7-897-540 9.79 1-1/4" 7-897-541 9.79 1-3/4"
20"
3/4-10 7-897-558 7.68 1-1/2"7-897-826 13.15 2-1/4"
25"
32" 7-897-830 13.73 2-3/4"
36", 40", 49" 3/4-10 7-897-824 10.02 1-3/4" 7-897-824 10.02 1-3/4"
Radial T-slot Table Face Plate Jaws• Heavy Semi-Steel body• Hard solid reversible jaws• Each set of jaws is furnished with mountingbolts (M20) and a wrench
• Sold in a 4 piece set
JawSize
PartNumber Retail Price A B C D E F G H J K L N P R S T Wt
lbs
6" 7-645-006 1,983.45 6.004.33
5.12 6.3 1.341.5
.50 1.575 10.25.866
8.06.3
5.001.00
.5511.00
110
8" 7-645-008 2,974.59 8.00 5.5 6.685 1.5 .85 2.047 12.2 10.0 6.00 .669 140
JawSize
PartNumber Retail Price
6" 7-645-106 112.93
8" 7-645-108 128.70
Type 9170
Jaws are also available
Replacement Jaws for RadialT-slot Table Face Plate Jaws
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 435
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/IN
DEP
END
ENT
OIL
CO
UN
TRY
CH
UC
KS
436 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Independent, Extra Heavy Duty Chuckswith Forged Steel Solid Body and Extra Large Thru-HoleStandard Accessories:
• 1 Set of two-piece reversible jaws(hard top jaws and hard master jaws)
• 1Wrench• 1 Set of mounting bolts• 2 Allen keys• Eye bolts
Optional Accessories:
• Hard top jaws• Chuck wrench with the flat T-bar end• Chuck wrench for fast jaw movement
Note: Type A1 Spindle has a 2 Bolt Hole Pattern(inside and outside the taper)Either an A1 or A2 Chuck will fit
Camlock “D”Direct Mount
A2Direct Mount
1. Chuck body3. Operating screw4. Thrust bearing5. Set screw6. Master jaw7. Hard top jaw8 and 9. Jaw mounting bolts10. Chuck mounting bolts11. Heavy duty wrench12. T-slot screw
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 436
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
437
EXTR
AH
EAV
YD
UTY
/IN
DEPEN
DEN
TO
ILC
OU
NTRY
CH
UC
KS
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Independent, Extra Heavy Duty Chuckswith Forged Steel Solid Body and Extra Large Thru-Hole
ChuckDiaD
Type ofMounting
GrippingForce
ClampingCapacity
WrenchTorque lbf*ft
Jawlbf
Mind1
Maxd2
15-3/4"A2-8 / D1-8
258 7057 1.00 15.75A2-11 / D1-11
20"
D1-8
258 7057 1.77 19.68A2-11 / D1-11
A2-15
25"A2-15
295 81601.97
24.80A2-20 3.94
28"A2-15
295 90402.95
27.95A2-20 3.94
32"A2-15
332 90405.12
31.50A2-20 7.09
40" A2-28 / Plain Back 369 9920 13.78 39.40
Chuck Parameters
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 437
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/IN
DEP
END
ENT
OIL
CO
UN
TRY
CH
UC
KS
438 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaA
PartNumber
RetailPrice
Type ofMounting
HoleDia
Cinch (mm)
B+.001 D G H I K L N E F RPM
maxWtlbs
Direct Mount A2, Type 4317
15-3/4"7-859-1620 4,858.05 A2-8 5.3 (135) 5.50075 6.750
5.71 6.067 2.981 .709 2.362 .748M16x2 .961
1200320
7-859-1625 5,255.79 A2-11 6.5 (165) 7.75075 9.2500 M20x2.5 1.118 302
20"7-859-2033 6,739.47 A2-11 6.5 (165) 7.75075 9.2500
5.71 6.067 2.981 .866 2.362 .748M20x2.5 1.118
1000450
7-859-2043 6,739.47 A2-15 8.0 (205) 11.251 13.000 M24x3 1.34 414
25"7-859-2543 10,279.47 A2-15 10.5 (267) 11.251 13.000
6.10 6.579 3.571 .866 2.953 .866 M24x31.34
850684
7-859-2555 10,279.47 A2-20 12.55 (320) 16.251 18.252 1.50 662
28"7-859-2845 14,974.23 A2-15 10.5 (267) 11.251 13.000
6.10 6.579 3.571 .866 2.953 .866 M24x31.34
750915
7-859-2853 14,974.23 A2-20 12.55 (320) 16.251 18.252 1.50 873
32"
7-859-3243 17,186.91 A2-15 10.5 (267) 11.251 13.000
6.50 6.972 3.571 .866 2.953 .866 M24x3
1.34
600
1290
7-859-3255 17,186.91 A2-20 12.55 (320) 16.251 18.252 1.50 1246
7-859-3257 17,186.91 A2-20 14.5 (368) – – – –
40" 7-859-4063 39,770.73 A2-28 20.86 (530) 23.001 25.500 6.89 7.366 3.571 1.10 2.953 .866 M30x3.5 1.53 430 1687
Direct Mount D1, Type 4347
15-3/4"7-859-6150 5,526.39 D1-8 5.3 (135) 5.50075 6.7500
5.71 6.067 2.981 .709 2.362 .7481 2
1200300
7-859-6153 5,536.89 D1-11 6.5 (165) 7.75075 9.2520 1.25 2.4 282
20"7-859-6200 7,335.48 D1-8 5.3 (135) 5.50075 6.7500
5.71 6.067 2.981 .866 2.362 .7481 2
1000468
7-859-6203 6,948.24 D1-11 6.5 (165) 7.75075 9.2520 1.25 2.4 452
28" 7-859-6839 14,969.58 D1-11 7.5 (192) 7.75075 9.252 6.10 6.579 3.57 .866 2.953 .866 1.25 2.4 750 993
Plain Back, Type 4307
40" 7-859-4021 39,770.73 Plain Back 22.05 (560) 28.5433 25.4961 6.89 7.366 3.571 1.10 2.953 .866 1-1/4”-7 1.53 430 1690
4-Jaw Independent, Extra Heavy Duty Chuckswith Forged Steel Solid Body and Extra Large Thru-Hole
Type A MountType 4317
Type D MountType 4347
Plain BackType 4307
Prices are subject to change without notice
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 438
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
439
EXTR
AH
EAV
YD
UTY
/IN
DEPEN
DEN
TO
ILC
OU
NTRY
JAW
S
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber
RetailPrice A B C D D1 E E1 G H K L O O1 P P1 Wt
lbs
15-3/4"7-890-2223 253.54 2.362
2.248 .7496
.866 1.295
.248 .1575 .5004
3.228
1.500
5.378 .827 .827 1.693 .8661 6.120"
25"
7-890-2323 390.40 2.953 .990 1.363 3.819 5.343 1.102 1.102 1.969 .9055 8.828"
32"
40"
Hard Top Jaws for 4-Jaw Independent• Sold by the piece
ChuckDia
PartNumber
RetailPrice A B C E F G H J K L M N
mmWtlbs
15-3/4" 7-890-1625 259.202.047
2.244 .7496 .2835 .7874 .5000
2.283
.6181 1.50
5.1973/4 - 10 Tr 44x8 LH
5.51
20" 7-890-2025 345.60 6.693 4.85
25”
7-890-3325 453.63 2.756 2.275 8.189 7/8 - 9 Tr 50x8 LH 10.2528”
32”
40"
Hard Master Jaws for 4-Jaw Independent• Sold by the piece
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 439
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/IN
DEP
END
ENT
OIL
CO
UN
TRY
SPA
RE
PAR
TS
440 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Operating Screw1 Pc
Part Number
RetailPrice
HoleDia
ThreadSize dmm
H L SquareS
15-3/4"7-890-6163 64.06 5.3"
44 x 8 LH
1.9295.079
.748(19mm)
7-890-6165 61.28 6.5" 4.488
20"
7-890-6203 52.40 5.3"
2.342
7.047
7-890-6205 78.69 6.5" 6.457
7-890-6208 75.71 8.0" 5.669
25"7-890-6257 228.64 10.5"
50 x 8 LH
2.3626.988
.866(22mm)
7-890-6259 195.97 12.5" 5.925
28"7-890-6277 281.54 10.5"
2.9538.563
7-890-6279 248.83 12.5" 7.500
32"7-890-6327 339.84 10.5"
3.543
10.335
7-890-6329 307.14 12.5" 9.272
40"7-890-6420 307.14 20.56" 9.055
7-890-6341 197.50 22.05" 8.465
Operating Screws
Hard MasterJaws1 Pc
RetailPrice
7-890-1625 259.20
7-890-2025 345.60
7-890-3325 453.63
ThrustBearing
1 Pc
RetailPrice
7-890-7165 57.38
7-890-7255 78.56
7-890-7325 85.02
ChuckDia
Hard TopReversibleJaws 1 Pc
RetailPrice
Type ofMounting
HoleDia
15-3/4"
7-890-2223
253.54A2-8 / D1-8 5.3
A2-11 / D1-11 6.5
20" 253.54
D1-8 5.3
A2-11 / D1-11 6.5
A2-15 8.0
25"
7-890-2323 390.40
A2-15 10.5
A2-20 12.5
28"A2-15 10.5
A2-20 12.5
32"A2-15 10.5
A2-20 12.5
40"A2-28 20.56
Plain Back 22.05
ChuckDia
Wrench withSliding Bar*
1 PcPart Number
RetailPrice
15-3/4"
7-890-9323 88.67
20"
25"
7-890-9325 143.87
28"
32"
40"
Spare Parts for 4-Jaw Independent
* See page 441 for more wrenches
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 440
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
441
EXTR
AH
EAV
YD
UTY
/IN
DEPEN
DEN
TO
ILC
OU
NTRY
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Wrenches for Independent Oil Country Chucks• Made of Steel• Wrenches are designed for fast chuck jaw movement•Wrench square size 0.866" (22mm)• Sizes in inches
Part Number Series: 7-859-Diameters: 25", 28", 32" and 40"
Part Number Series: 7-825-Diameters: 25" and 32"
Wrench for fast jaw movement Wrench with flat end
PartNumber
RetailPrice
7-890-9327 167.97
PartNumber
RetailPrice
7-890-9326 167.97
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 441
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/IN
DEP
END
ENT
OIL
CO
UN
TRY
SPA
RE
PAR
TS
442 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
L
ChuckDia Thread
Short Screw Long Screw
PartNumber
RetailPrice L Part
NumberRetailPrice L
15-3/4"3/4 - 10 7-897-558 7.58
1-1/2
7-897-560 7.87 2-1/220"
25"
7/8 - 9 7-897-572 10.14 7-897-573 10.14 2-3/428"
32"
40"
Top Jaw Mounting Bolts for 4-Jaw Independent
ChuckDia
PartNumber
RetailPrice
TaperSize
Thread*Size L Bolt Circle
Dia DQty perChuck
15-3/4"7-859-91645 14.85 A2-8 M16 x 2
4.5
6.750
8
7-859-92045 35.52 A2-11 M20 x 2.5 9.2500
20"7-859-92045 35.52 A2-11 M20 x 2.5 9.2500
7-859-92460 48.60 A2-15 M24 x 3 6 18.250
25"7-859-92460 48.60 A2-15
M24 x 36 13.000
7-859-92465 21.00 A2-20 6.5 18.252
28"7-859-92460 48.60 A2-15
M24 x 36 13.000
7-859-92465 21.00 A2-20 6.5 18.252
32"7-859-92460 48.60 A2-15
M24 x 36 13.000
7-859-92465 21.00 A2-20 6.5 18.252
40" 7-859-93070 108.00 A2-28 M30 x 3.5 7 25.500
Type A Spindle Mounting Bolts, Metric, DIN for 4-Jaw Independent
D
*Bolts with Imperial threads are stocked items and available upon orderNOTE: Inch thread bolts are available on special order
ChuckDia
PartNumber
RetailPrice Mount Thread
Size L Bolt Circle DiaD
Qtyper Chuck
40" 7-897-592 23.00 Plain Back 1-1/4 - 7 7 25.4961 8
Plain Back Mounting Bolts for 4-Jaw Independent
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 442
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
443
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTRY
CH
UC
KS
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Self-Centering Extra Heavy Duty Oil Country Chucks• Forged Steel body• Large thru-hole
Type A1Mount
Standard Accessories:
• 1 Set of two-piece heavy duty reversible jaws(hard top jaws and hard master jaws)
• 1Wrench• 1 Set of mounting bolts and eye bolt
Optional Accessories:
• Soft top jaws• Hard top jaws• Special heavy duty wrenches, see page 441
1. Chuck body2. Back cover3. Scroll4. Pinion5. Pinion half ring6. Pinion sleeve7. Master jaw8. Hard top jaw9. Nipple10. Chuck mounting bolts11 and 13. Chuck assembly bolts12. Spindle locating pin14. Heavy duty wrench15 and 16. Jaw mounting bolts
Type A2Mount
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 443
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTR
YC
HU
CK
S
444 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaD
Type ofMounting
Total GrippingForce
ClampingCapacity Load
Capacitylbs
RPMmax
Max Wt ofWorkpiece
lbsWrenchTorquelbf*ft
Jawlbs
Mind1
Maxd2
15-3/4"A2-6
258 18500 1.00 15.75 3250 1400 6500A2-8A2-11
20"A2-11
332 20700 1.77 19.68 5200 1000 10400A2-15
25"A2-15
420 229503.15
24.80 7800 850 15600A2-20 6.30
32"A2-15
435 255005.12
31.50 10400 600 20800A2-20 7.09
Chuck Parameters
3-Jaw Self-Centering Extra Heavy Duty Oil Country Chucks
*All indirect mount chucks are provided with a fully machined backplateNOTE: No thru hole enlargement
T-slot Direct Mount3515-HD
Indirect Mount3575-HD
ChuckDia D
PartNumber
Type of Mounting Hole Dia dB G H h C S N L k Thread
MRPMMax
Wtlbs
T-slot
Direct Indirect* inch mm a b
15-3/4"7-825-1606 – A2-6 4.055 103
9.25 7.75075 4.330 3.425 0.750 2.980 5.345 5.354 0.748 M20 x 2.5 1400 336
0.8267 0.5512
7-825-1608 – A2-8 5.34 135.67-825-1611 – A2-11 5.12 130
20"7-825-2011 A2-11 – 7.48 190 9.25 7.75075 4.685
3.425 0.750 2.980 5.345 6.535 0.748M20 x 2.5
1000560
7-825-2025 – A2-15 8.00 200 13.00 11.251 4.685 M24 x 3 530
25"7-825-2515 A2-15 – 10.75 273 13.00 11.251
5.669 3.6420.813
3.295 5.315 8.268 0.866 M24 x 3 850615
1.2992 0.86617-825-2520 – A2-20 12.55 319 18.25 16.251 0.875 555
32"7-825-3215 A2-15 – 10.75 273 13.00 11.251
5.906 3.6420.813
3.295 5.315 8.268 0.866 M24 x 3 6001108
7-825-3220 A2-20 – 12.55 319 18.25 16.251 0.945 1080
PartNumber
RetailPrice
7-825-1606 5,826.007-825-1608 5,826.007-825-1611 5,826.00
7-825-2011 11,602.177-825-2025 12,346.35
7-825-2515 17,380.537-825-2520 17,631.30
7-825-3215 26,531.257-825-3220 26,531.25
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 444
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
445
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTRY
JAW
S
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
OALA B K H G F J L D E C S Thread
M
Wtlbs1 Pc
15-3/4" 5.35431.969
1.50 2.248 .7496 .488 .283 1.299
.6299 .5512 2.146
.126
3/4 - 103.5
20" 6.5354 4.3
25"8.858 2.756 .787 .787 2.441 7/8 - 9 11.15
32"
Hard Master Jaws for Scroll Chucks• Sold by the set
Diameter: 15-3/4" Diameters: 25" - 28"Diameter: 20"
See page 447 for jaw part numbers
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 445
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTR
YJA
WS
446 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
OALA B K H G F J D E C N O P
Wtlbs1 Pc
15-3/4"
5.315
2.362
1.50 2.248 .7496 .5004 .248
.866 1.299 3.229 .827 2.047 3.366 5.0620"
25"2.953 .945 1.378 3.543 .984 2.047 3.366 8.70
32"
Hard Top Jaws for Scroll Chucks• Sold by the set
See page 447 for jaw part numbers
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 446
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
447
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTRY
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Pinion
PartNumber
RetailPrice OD Length Wt
lbs
15-3/4" 7-886-5167 93.31 1.73 3.62 1.19
20"7-886-520 266.22
1.97
4.45 2.1
7-886-5210 336.70 4.06 1.85
25"7-886-5258 392.70 5.24 2.25
7-886-5289 392.70 4.61 2.03
32"7-886-5328 421.98 6.71 3.02
7-886-5329 448.70 6.10 3.02
Pinion Half Ring
PartNumber
RetailPrice
7-888-716 14.04
7-888-720 12.39
– –
7-888-725 18.48
Pinion Sleeve
PartNumber
RetailPrice
7-888-516 46.92
7-888-520 54.21
– –
7-888-525 66.45
7-888-532 151.23
Wrench
PartNumber
RetailPrice
7-890-9323 88.67
7-889-720 107.81
7-889-725 100.93
7-889-732 112.19
Scroll
PartNumber
RetailPrice OD H Wt
lbs
7-887-516 978.21 12.9 1.3
22.7
23.4
23.4
7-887-520 2,244.4216.4 1.2
36.4
7-887-5210 1,803.00 31.5
7-887-525 3,050.7921.3 1.6
65.7
7-887-5289 3,925.31 51.4
7-887-5328 5,488.5827.4 1.75
150
7-887-5329 5,488.58 144
ChuckDia
Hard MasterJaws
3 Pc SetPart Number
RetailPrice
Hard TopJaws
3 Pc Set
RetailPrice
TaperSize
15-3/4" 7-885-5167 684.29 7-883-5167 570.24
A2-6
A2-8
A2-11
20" 7-885-5207 1,177.31 7-883-5207 1,188.16A2-11
A2-15
25" 7-885-5289 1,261.31 7-883-5289 1,261.31A2-15
A2-20
32" 7-885-5329 1,345.28 7-883-5329 1,311.55A2-15
A2-20
Spare Parts for Scroll Chucks
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 447
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTR
YSP
AR
EPA
RTS
448 HEAVY DUTY AND OIL COUNTRY Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Wrenches for Scroll Oil Country Chucks• Made of Steel• Wrenches are designed for fast chuck jaw movement•Wrench square size 0.866" (22mm)• Sizes in inches
Part Number Series: 7-859-Diameters: 25", 28", 32" and 40"
Part Number Series: 7-825-Diameters: 25" and 32"
Wrench for fast jaw movement Wrench with flat end
PartNumber
RetailPrice
7-890-9327 167.97
PartNumber
RetailPrice
7-890-9326 167.97
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 448
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
449
EXTR
AH
EAV
YD
UTY
/SC
RO
LLO
ILC
OU
NTRY
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts HEAVY DUTY AND OIL COUNTRY
Prices are subject to change without notice
Heavy Duty and Oil Country
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber
RetailPrice
TaperSize
ThreadSize M Length
Bolt Circle Diameter Qty perChuckA2 Direct A2 Indirect
15-3/4"7-859-91645 14.85 A2-8 M16 x 2 4.5 6.7500 –
6
7-859-92045 35.52 A2-11 M20 x 2.5 4.5 – 9.2500
20"7-859-92050 36.00 A2-11 M20 x 2.5 5 9.2500 –
7-859-92422 42.00 A2-15 M24 x 3 2.2 – 13.000
25"7-859-92460 48.60 A2-15 M24 x 3 6 13.0000 –
7-859-92450 46.00 A2-20 M24 x 3 5 – 18.252
32"7-859-92460 48.60 A2-15 M24 x 3 6 13.0000 –
7-859-92450 46.00 A2-20 M24 x 3 5 18.2500 –
ChuckDia Thread
Short Bolt 1 Long Bolt 2
PartNumber
RetailPrice L Part
NumberRetailPrice L
15-3/4"3/4”-10 7-897-521 5.60
1-1/2
7-897-829 5.67 2-1/220"
25"7/8”-9 7-897-572 10.14 7-897-573 10.14 2-3/4
32"
Top Jaw Mounting Bolts for Scroll Chucks
Type A Spindle Mounting Bolts for Scroll Chucks
A1
A2
L
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:32 PM Page 449
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
AN
DC
YLI
ND
ERSE
LEC
TIO
N
450 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Power Chuck Selection Guide
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Min Chuck Hole Dia inch
Workpiece Dia min-max inch
Workpiece Length min-max inch
Weight of Workpiece min-max lbs
Maximum Draw Bar Pull Force lbf/kN
Maximum Gripping Force lbf/kN
Maximum Machining Speed RPM
inch 5 6-1/4 8 10 12-1/2 15-3/4
mm 125 160 200 250 315 400
Chuck Outside Diameter Selection • Chuck outside diameter should beselected in reference to the min-maxworkpiece diameter, inside or outside
• See chuck clamping ranges on page 452
Type of ChuckType of Mount
Plain Back A2 Mount Other
3-Jaw Large Thru-Hole
3-Jaw Self-Contained
5C Collet Chuck
16C Collet Chuck
Chuck Type Selection• Select the proper typeof chuck in reference tothe chuck application,machining requirementsand workpiece dimensions
Lathe Spindle Nose Selection• To determine proper Spindle Type andSize (A and D) refer to page 451
Hard Top JawsSupplied with allBISON-BIAL Power Chuckssee page 465
OptionalSoft Top Jawssee page 465
Spindle TypeA1 and A2
Camlock Spindle TypeD1
Power Chuck and Cylinder Selection Worksheet
Chuck Working Parameter Selection
Threaded Nut and Draw Tube Selection
• To check chuck (type 2405) clamping ranges and total grippingforce in comparision with the chuck speed refer to page 452
• It is very important to verify this data with your customer’smachining requirements
• When selecting the chuck type and diameter go to theproper chuck section in this catalog to find all of the requiredtechnical data
• The Overall Length of the Draw Tube (size L) canbe calculated after determining the distancebetween the face of the cylinder back plate andthe face of the lathe spindle nose (size A)
• See page 467 for the Draw Tube length calculationfor BISON-BIAL 3-jaw power chucks, Type 2405
• For more information read your BISON-BIAL chuck manual
Jaw Selection for 3-Jaw Chucks (type 2405)
• When replacing the chuck, the existing Draw Tubecan usually be used without any alterations
• If the Draw Tube nut has to be replaced, seepage 466 for our threaded nuts and blank nuts
• For your convenience, we also supply special nuts
To ensure chuck and cylinder accuracy, fax this worksheet to your Customer Service Representative at 508-653-5110.
• See pages 458-459 forhydraulic cylinders
Cylinder Selection• If replacing a cylinder, please check the Draw Tube pull force and maxRPM or go to the chuck pages of the catalog to select the proper cylinder
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 450
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
451
POW
ERC
HU
CK
SELECTIO
NG
UID
E
Quality Products • Partnership • Industry Experts POWER CHUCKS
Power Chuck Selection Guide
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
SpindleNose F1 F2 B C
max
ThreadE1 = E2UNC-3B
A-4 3.2500 – 2.5005 +.0005 .4375 7/16 - 14
A-5 4.1250 2.4374 3.2505 +.0005 .5625 7/16 - 14
A-6 5.2500 3.2500 4.1880 +.0005 .6250 1/2 - 13
A-8 6.7500 4.3750 5.50075 +.0005 .6875 5/8 - 11
A-11 9.2500 6.5000 7.75075+.0005 .7500 3/4 - 10
A-15 13.0000 9.7500 11.251 +.001 .8125 7/8 - 9
A-20 18.2500 14.5000 16.251 +.001 .8750 1 - 8
BISON-BIAL Chucks meet all ASA Standard B5.9-1960 requirements.See our chuck catalog for spindle nose accuracy (T.I.R.)
Selecting the chuck mounting:
• Choose from the types below• For the short taper spindle nose Types A and D measure the pilotdiameter and length (dimensions B and C), bolt circle diameter(dimensions F1 and F2) and diameter of the holes (dimensionsE1 and E2)
• In the case of A type mount check the number of boltcircles (one for A2 mount, or two for A1 mount)
• Chucks with an A1 mount can only be installed on an A1spindle nose
• Chucks with an A2 mount can be installed on either anA1 or A2 spindle nose
Spindle Type A1 and A2 Mount
• Type A1 is exactly as shown with tapped holes in both inner and outer bolt circles• Type A2 is as shown except without holes in the inner bolt circle
Camlock Spindle Type D1 Mount
Important: The camlock stud length is adjustable to suit the spindle camlockRefer to pages 401 for a full selection of camlock backplates
SpindleNose A F B C
max E Numberof Holes
D1-3 3.622 2.7820 2.1250 +.00025 .4375 .5937 3
D1-4 4.606 3.2500 2.5005 +.0005 .4375 .6562 3
D1-5 5.748 4.1250 3.2505 +.0005 .5000 .8750 6
D1-6 7.126 5.2500 4.1880 +.0005 .5625 1.000 6
D1-8 8.858 6.7500 5.50075+.0005 .6250 1.125 6
D1-11 11.732 9.2520 7.75075 +.0005 .6875 1.250 6
D1-15 15.866 13.0000 11.251 +.001 .7500 1.375 6
Spindle Nose with A1, A2 and D1 Mount
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 451
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
INFO
RM
ATI
ON
452 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Power Chuck Information
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
15-3/4” Chuck
Gripping force loss was determined on a chuck equipped with BISON-BIAL Hard Top Jaws
Clamping Ranges
Total Gripping Force and Speed
Red MaximumGreen Minimum
New Sizes
5” Chuck
6-1/4” Chuck 8” Chuck 10” Chuck 12-1/2” Chuck
Chuck Dia d1 d2 d3 d4 d5 d6 d7
5" .3150 - 2.5984 1.9685 - 4.0945 3.1890 - 5.3543 4.5670 - 6.7323 .3937 - 2.5984 1.8110 - 3.9764 3.0709 - 5.31506-1/4" .5906 - 3.4646 2.5591 - 5.3543 4.0945 - 6.9291 5.7078 - 8.5827 .6693 - 3.5433 2.3228 - 5.2362 3.8976 - 6.77178" .6299 - 4.3700 1.1496 - 6.7717 5.0394 - 8.7402 7.0079 - 10.7087 .6299 - 4.3701 2.5197 - 6.3386 4.5669 - 8.307110" .6229 - 5.2756 3.8583 - 8.3858 6.2992 - 10.8661 8.8583 - 13.4252 .6229 - 5.2756 3.1496 - 7.7953 5.6693 - 10.3150
12-1/2" 1.8504 - 6.9685 4.9213 - 10.0000 7.2835 - 12.4016 10.0394 - 15.1575 1.8504 - 6.9685 4.6063 - 9.7244 6.9685 - 12.086615-3/4" 2.1654 - 8.2677 5.9055 - 11.8110 9.2520 - 15.3543 14.5669 - 18.8976 2.1654 - 8.2677 5.9055 - 11.8110 9.2520 - 15.3543
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 452
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
453
POW
ERC
HU
CK
S
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Plain Back Chucks
JL
B
c
P
KA
f
C T
b
SD U O
E
d
H
G
a
e
M
ChuckDia
PartNumber
RetailPrice A B C D
H6 E F G 6 Bolts(mm) H J K
5" 7-781-0500 2,159.97 5.315 2.3622 2.3228 4.7244 0.1575 4.126 M10 0.6102 0.4724 1.77176-1/4" 7-781-0600 2,313.18 6.6535 3.189 3.0941 5.5118 0.2362 4.126 M10 0.4528 0.7874 2.36228" 7-781-0800 2,512.32 8.2677 3.74 3.6453 6.6929 0.2362 5.252 M12 0.5512 1.1811 2.598410" 7-781-1000 3,045.18 10 4.1732 4.0783 8.6614 0.2362 6.748 M16 0.7087 1.7717 3.7008
12-1/2" 7-781-1200 4,407.84 12.4016 4.2519 4.1571 8.6614 0.2362 6.748 M16 0.8661 1.9685 4.25215-3/4" 7-781-1600 9,206.40 15.748 5.1181 4.959 11.811 0.2362 9.252 M20 1.1024 2.3622 5.5118
ChuckDia
PartNumber
RetailPrice
L max(mm)
Wedge StrokeM O Thru-Hole
P R S T Umin
Umax
5" 7-781-0500 2,159.97 M40 x 1.5 0.3937 0.7874 1.3386 2.2047 0.0591 0.0787 -0.374 0.01976-1/4" 7-781-0600 2,313.18 M55 x 2 0.4724 0.748 1.7717 2.756 0.1024 0.0949 0 0.47248" 7-781-0800 2,512.32 M60 x 2 0.6299 0.8071 2.0472 3.622 0.1024 0.1343 -0.0197 0.610210" 7-781-1000 3,045.18 M85 x 2 0.748 0.9843 2.9528 4.6063 0.1024 0.1343 -0.0079 0.7402
12-1/2" 7-781-1200 4,407.84 M100 x 2 0.9055 1.1023 3.5827 5.2756 0.1024 0.1343 -0.315 0.590615-3/4" 7-781-1600 9,206.40 M130 x 2.5 0.9055 1.535 4.724 6.4567 0.0197 0.2154 -0.4724 0.4331
ChuckDia
PartNumber
RetailPrice
Jaw Travela
bmin
bmax
cmin
cmax
Jaw Bolts d(mm) e f T-slot g
(H7) h
5" 7-781-0500 2,159.97 0.1063 0.9449 1.0512 0.2756 0.7874. M8 0.5512 1.5945 0.3937 0.098436-1/4" 7-781-0600 2,313.18 0.1083 1.1535 1.2638 0.3543 1.0039 M10 0.7087 2.0669 0.4724 1.49618" 7-781-0800 2,512.32 0.1457 1.3858 1.5315 0.4134 1.2992 M12 0.9843 2.5984 0.5512 1.57510" 7-781-1000 3,045.18 0.1732 1.8346 2.0079 0.4016 1.5236 M12 1.1811 2.9921 0.6299 1.7717
12-1/2" 7-781-1200 4,407.84 0.2087 2.2047 2.4134 0.6181 1.9961 M16 1.2598 3.7598 0.8268 2.047215-3/4" 7-781-1600 9,206.40 0.2087 3.0394 3.248 0.4921 2.0276 M20 1.6929 4.5276 1.004 2.3622
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 453
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
S
454 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Large Thru-Hole Chucks, Plain Back
• See previous page for dimensions• See page 460 for adapter dimensions• See page 464 for spare parts
ChuckDia
PartNumber
RetailPrice
Max Swingof
Top Jaws
MaxDraw BarPull Force
MaxGripping
Force
MaxSpeed
Momentof
Inertia
WeightwithoutTop Jaws
in lbf RPM lbs*ft2 lbs
5" 7-781-0500 2,159.97 6.89 3934 8093 7000 0.427 11.96-1/4" 7-781-0600 2,313.18 8.346 4850 12566 6000 1.342 24.38" 7-781-0800 2,512.32 10.945 7496 18959 5000 3.53 41.910" 7-781-1000 3,045.18 13.583 9480 24471 4200 7.3 75
12-1/2" 7-781-1200 4,407.84 15.433 12346 31816 3300 17.18 130.115-3/4" 7-781-1600 9,206.40 19.449 15961 40466 2500 51.02 244.7
ChuckDia
Matching HardTop Jaws
Part Number
RetailPrice
Matching SoftTop Jaws
Part Number
RetailPrice
5" 7-787-305 48.38 7-788-305 82.346-1/4" 7-787-306 289.26 7-788-306 111.878" 7-787-308 325.05 7-788-308 139.7710" 7-787-310 388.02 7-788-310 169.41
12-1/2" 7-787-312 499.32 7-788-312 264.0915-3/4" 7-787-316 543.78 – –
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 454
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
455
POW
ERC
HU
CK
S
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Matching HardTop Jaws
Part Number
RetailPrice
Matching SoftTop Jaws
Part Number
RetailPrice
6-1/4" 7-787-306 289.26 7-788-306 111.87
8" 7-787-308 325.05 7-788-308 139.77
10" 7-787-310 388.02 7-788-310 169.41
12-1/2" 7-787-312 499.32 7-788-312 264.09
Standard Accessories:
• Hard Top JawsStandard Serration: 1.5mm x 60˚
• Chuck Mounting Bolts• T-nuts with Jaw Mounting Bolts• Draw Tube Blank, T-nuts, andWrench
Soft Top JawsChuck Grease
Part Number 7-799-025
Direct and Indirect A2 Mount Chucks
Type 2405-KA
Large Thru-Hole Chucks, Direct and Indirect A2 MountBISON-BIAL’s new line of 3-Jaw Power Operated Lathe Chucks are designed with large thru-holesThis line is a direct replacement for Kitagawa style standard chucks
Features:
• Repeatability ±0.0005"• Body and parts are manufactured of high grade Alloy Steel• Mating surfaces of body, wedge and jaws are case hardened (58HRC) and ground• Rigid design• Master jaws secured against throw-off• Direct lubrication of master jaws• Unbalance within the limits per DIN 6386• A2 mounting corresponds to the USAS B5.9-1967• Chuck and chuck jaws correspond to the ASME B5.8-2001
ChuckDia
PartNumber
RetailPrice
SpindleNose
Max Swingof
Top Jaws
MaxDraw BarPull Force
MaxGripping
Force
MaxSpeed
Momentof
Inertia
WeightwithoutTop Jaws
in lbf RPM lbs*ft2 lbs
6-1/4" 7-781-0650 2,503.98 A2-5 8.346 4850 12566 6000 1.342 27.6
8" 7-781-0860 2,793.42 A2-6 10.945 7496 18959 5000 3.53 44
10"7-781-1060 3,444.39 A2-6
13.583 9480 24471 4200 7.3 83.87-781-1080 3,444.39 A2-8
12-1/2"7-781-1260 4,791.18 A2-6
15.433 12346 31816 3300 17.18 130.17-781-1280 4,791.18 A2-8
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 455
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
S
456 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Power Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Direct and Indirect A2 Mount Chucks
Direct Mount
• Bolts directly to spindle
Indirect Mount
• Back plate must be removed for spindle mounting• After it's mounted, the chuck is then attached
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 456
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
457
POW
ERC
HU
CK
S
Quality Products • Partnership • Industry Experts POWER CHUCKS
Power Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Direct and Indirect A2 Mount Chucks
Chuck Diameter 15-3/4"A2-11 Direct Mount
ChuckDia
PartNumber
SpindleNose
MountType A B C D E F G 6
Bolts H J K
6-1/4" 7-781-0650 A2-5 Direct 6.6535 3.543 3.685 3.2505 0.5906 4.126 7/16 - 14 0.4528 0.7874 2.3622
8" 7-781-0860 A2-6 Direct 8.2677 4.1732 4.3146 4.188 0.6693 5.252 1/2 - 13 0.6693 1.1811 2.5984
10"7-781-1060 A2-6 Indirect
10 4.685 4.8264 5.5007 0.748 6.7481/2 - 13
0.748 1.7717 3.70087-781-1080 A2-8 Direct 5/8 - 11
12-1/2"7-781-1260 A2-6 Indirect
12.4016 4.7638 4.9213 5.5007 0.748 6.7481/2 - 13
0.7087 1.9685 4.2527-781-1280 A2-8 Direct 5/8 - 11
ChuckDia
PartNumber
SpindleNose
L max(mm)
WedgeStroke M O Thru-Hole P R S T U
minU
maxZ
minZ
max
6-1/4" 7-781-0650 A2-5 M55x2 0.4724 0.748 1.7717 2.756 0.1024 0.0949 0.5906 1.063 0.591 1.063
8" 7-781-0860 A2-6 M60x2 0.6299 0.8071 2.0472 3.622 0.1024 0.1343 0.6496 1.2795 0.65 1.28
10"7-781-1060 A2-6
M85x2 0.748 0.9843 2.9528 4.6063 0.1024 0.1343 0.7402 1.4882 0.937 1.6857-781-1080 A2-8
12-1/2"7-781-1260 A2-6
M100x2 0.9055 1.1023 3.5827 5.2756 0.1024 0.1343 0.4331 1.3386 0.74 1.4887-781-1280 A2-8
ChuckDia
PartNumber
SpindleNose
Jaw Travela
bmin
bmax
cmin
cmax
d(mm) e f g
(H7) h
6-1/4" 7-781-0650 A2-5 0.1083 1.5551 1.2638 0.3543 1.0039 M10 0.7087 2.0669 0.4724 1.4961
8" 7-781-0860 A2-6 0.1457 1.3858 1.5315 0.4134 1.2992 M12 0.9843 2.5984 0.5512 1.575
10"7-781-1060 A2-6
0.1732 1.8346 2.0079 0.4016 0.1248 M12 1.1811 2.9921 0.6299 1.77177-781-1080 A2-8
12-1/2"7-781-1260 A2-6
0.2087 2.2047 2.4134 0.6181 1.9882 M16 1.2598 2.9921 0.6299 1.77177-781-1280 A2-8
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 457
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
CY
LIN
DER
S
458 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Chuck Cylinders
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
High Speed Hydraulic Cylinders with Closed Center
Application:• Designed for power chucks and special tooling working in the horizontal position
.
.
P3
H
F K1
W1
D3
K3O V2
r
P1
P2
D1
G B E1 EC3C1
X
I
S
W
T
L
U
A1
d
Z
K
M
RZ1
V1
p1 p2 x q
Q1
K2 F1
Y
Z
K2 F1
Q
Pull Draw
Part NumberG H I K K1 (H8) K2 (J6) K3 (H8) L M O P1 P2 P3 Q Q1
in in
7-796-100A 7-796-100B 1.5748 7.51970.1969 0.4921
0.98430.7087
0.7087 4.6457 2.8740 G 3/8 2.1654 1.8898 2.1260 3.0315 2.8150
7-796-200A 7-796-200B 2.5591 9.9213 1.7323 – 6.2992 3.5433 G 1/2 2.5591 2.3228 3.7795 3.8189 3.1890
Part NumberR S max. T U (stroke) V1 V2 W W1 X Y Z Z1 p1
in
7-796-100A 7-796-100B 6.0827 1.8504 4.0945 1.2598 0.3937 1.1811 1.7717 1.1024 0.3937 2.83461.0630
1.2992 0.9252
7-796-200A 7-796-200B 8.1496 3.1496 5.5118 1.9685 0.4724 1.4173 2.3622 1.3780 0.4724 – 2.0079 1.4173
LinearPositioning
SystemPart Number
RetailPrice
TwoProximitySwitches
Part Number
RetailPrice
A1 B (h6) C1 C3D1 D3
d E E1F F1
in in
7-796-100A 2,342.13 7-796-100B 2,342.13 3.9370 3.1496 4.1339 4.7244 4 x M12 6 x ø 11 1.0039 5.6299 5.5118 M24M16 x 1.5
7-796-200A 5,031.45 7-796-200B 5,031.45 7.8740 4.9213 6.6929 8.8583 6 x M16 6 x ø 17 1.1811 10.0394 9.8425 M42 x 3
SDC 1)
1) 1304 - SDC - with stroke control for two proximity sensors2) 1304 - SKC - with stroke control for linear positioning system
SKC 2)
Part Number p2xq rPiston Area Max
PressureDraw Bar Push
(p=4.5MPa)
Draw BarPull
(p=4.5MPa)
Oil leakage(p=3Mpa. 50° C)
MaxSpeed
Momentof
Inertia
PowerAbsorption
(at max speed)Wt
A in2 B in2 Psi lb gal/min RPM lbs*ft2 HP lb
7-796-100A 7-796-100B30 x 30 M5
11.5785 10.23001015.2639
11465.2590 10116.4050 0.4 7000 0.71 1.34 25.1
7-796-200A 7-796-200B 47.7401 43.5396 27651.5070 25178.6080 0.5 4000 7.10 2.68 82.8
Type1304-SKC
Type1304-SDC
NOTE: It is strongly recommended to mount cylindersfrom the rear side with the use of long mounting bolts –mounting the cylinder directly to the pulley of belt driveresults in the shortest distance from the rear main spindlebearing and does not require an additional adapter plate(long mounting bolts are included in delivery)
Features:• High rotation speeds and operational safety systems• Piston stroke control system located on the rear side of the cylinder• Safety valves to ensure the constant pulling force of cylinder in the event ofa drop or failure in oil supply pressure (min. oil supply pressure is 0.3 MPa)
• Unbalance G 2.5
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 458
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
459
POW
ERC
HU
CK
CY
LIND
ERS
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Chuck Cylinders
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
High Speed Hydraulic Cylinders with Large Thru-HoleApplication:• Designed to actuatepower chucks on CNC lathecenters and special grippingfixtures working in thehorizontal position
Pull DrawSDC1) SKC 2)
1) 1305-SDC – with stroke control for two proximity sensors2) 1305-SKC – with stroke control for linear positioning system
NOTE: It is strongly recommended to mountcylinders from the rear side with the use of longmounting bolts – mounting the cylinder directlyto the pulley of belt drive results in the shortestdistance from the rear main spindle bearing anddoes not require an additional adapter plate (longmounting bolts are included in delivery)
LinearPositioning
System
TwoProximitySwitches
RecommendedChuck Dia
Piston Area MaxPressure
Draw BarPush
(p=4.5MPa)
DrawBar Pull
(p=4.5MPa)
Oilleakage
(p=3Mpa.50° C)
MaxSpeed
Momentof
Inertia
PowerAbsorption
(at maxspeed)
Wt
Part Number A in2 B in2 Psi lb gal/min RPM lbs*ft2 HP lb7-797-102A 7-797-102B 5" & 6" 16.74 15.7325
652.6697
10790.832 10116.405 0.8 7100 0.71 1.608 33.02637-797-130A 7-797-130B 8" 22.5525 21.421 14387.776 13713.349 0.9333 6300 0.9467
2.0144.0351
7-797-150A 7-797-150B 10" 26.1951 24.335 16860.675 15736.63 1.0667 6000 1.6567 50.64037-797-225A 7-797-225B 12" 37.6651 35.0301 24279.372 22480.9 1.8667 4500 4.0233 2.68 77.0614
Linear Positioning SystemPart Number Retail Price Two Proximity Switches
Part Number Retail Price
7-797-102A 3,881.19 7-797-102B 3,881.197-797-130A 4,330.65 7-797-130B 4,401.427-797-150A 4,954.29 7-797-150B 4,954.297-797-225A 6,092.49 7-797-225B 6,092.49
Part NumberA1 B2 (h6) C
DE E1
F1 F2 F3G H H2
in in in in7-797-102A 7-797-102B 5.1181 5.1181 5.7874
6 x Ø96.4961 6.378 M55x2 M50x1.5 M52x1.5 2.4803 6.9488
0.80717-797-130A 7-797-130B 5.9055 5.5118 6.4961 7.2835 7.1654 M60x15 M55x2 M60x1.5 2.7559 7.1857-797-150A 7-797-150B 6.4961 6.2992 7.0866
6 x Ø117.9528 7.7559 M75x2 M72x1.5 M74x1.5 3.3465 7.0472
0.82687-797-225A 7-797-225B 8.0709 8.2677 8.937 9.8031 9.6457 M105x2 M100x2 M104x2 4.5276 8.0315
Part NumberI K K1 (H9) K2 (H9) L M N O P1 P2 P3 R2 *
in7-797-102A 7-797-102B
0.19691.8307 2.0669 1.8504
3.2677Ø68
M6 (x2) G3/8
4.4094 3.9764 4.1339
1.25987-797-130A 7-797-130B 2.0669 2.2441 2.0669 Ø76 4.7244 4.1732 4.44887-797-150A 7-797-150B
0.3152.6575 2.8543 2.7165 3.7008 Ø91 5.3937 5.1181 5.1181
7-797-225A 7-797-225B 3.7598 4.0492 3.8189 4.1732 Ø120 6.2795 5.315 6.0039
Part NumberS max. T U (stroke) V1 V2 W1 W2 X a b e f
in7-797-102A 7-797-102B
0.8661 2.874 0.9843 0.35431.0236
0.98430.9843
0.2362
5.1181 3.1496 5.51182.6575
7-797-130A 7-797-130B 1.10241.1024
5.2362 3.2677 5.90557-797-150A 7-797-150B 0.9843 3.2283 1.1811 0.3937
1.41735.3543 3.4449 6.4567
3.54337-797-225A 7-797-225B 1.2205 3.7008 1.378 0.4331 1.2598 1.1811 6.1024 3.7008 8.189
Type1305-SKC
Type1305-SDC
Features:• High rotation speeds and operational safety systems• Piston stroke control system is located on the rear sideof the cylinder
• Piston rod with two different thread sizes allows the optimalusage of main spindle through-holes
• Safety valves ensure the constant pulling force of cylinderin the event of a drop or failure in oil supply pressure(min. oil supply pressure is 0.3 MPa)
• Unbalance G 2.5
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 459
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
BA
CK
PLA
TES
460 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Chuck Backplates
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Adapter Type 8213-135/5Z 8213-160/5K 8213-160/6K 8213-200/6K 8213-200/8K 8213-250-315/K 8213-250-15/6K 8213-400/11K
Part Number 7-789-5055 7-789-5065 7-789-5066 7-789-5086 7-789-5088 7-789-5128 7-789-5126 7-789-51611
Retail Price 274.89 385.89 523.71 445.77 602.64 527.13 527.31 715.77
Chuck Dia 5” 6-1/4” 6-1/4” 8” 8” 10” and 12-1/2” 10” and 12-1/2” 15-3/4”
A2 MountDirect Mount Direct Mount Indirect Mount Direct Mount Indirect Mount Direct Mount Indirect Mount Direct Mount
A2-5 A2-5 A2-6 A2-6 A2-8 A2-8 A2-6 A2-11
B 5.12” – -– – – – – –
BF 4.724” 5.512” 6.496” 6.693” 8.268” 8.661” 8.661” 11.811”
BA 3.251” 3.251” 4.188” 4.188” 5.501” 5.501” 4.188” 7.751”
BB 2.835” 3.130” – 4.055” – 5.358” 4.055” 7.591”
C 4.126” 4.126” 5.236” 5.252” 6.748” 6.748” 5.252” 9.252”
C1 -– – 4.126” – 5.252” – 6.748” –
C2 4.094” 4.567” – 5.906” – 7.480” 7.480” 10.236”
D 3 x M10 6 x M10 6 x M12 6 x M12 6 x M16 6 x M16 6 x M12 6 x M20
D1 3 x M6 3 x M6 6 x M10 6 x M6 6 x M12 6 x M8 6 x M8 3 x M10
D2 – – – – – – 3 x M8 –
D3 – – 5.5118” – 6.693” – – –
E – – 2.992” – 4.055” – 4.331” –
L 0.5315” .4528” – .6693” – .7087” .7480” 0.9449”
L1 0.2756” - – – – – – –
L2 0.1772” - – – – – – –
T 0.6693” .5906” 1.378” .6693” 1.575” .7480” .9646” 0.9449”
T1 – – 1.0236” – 1.142” – – –
T2 – – .2559” – .2559” – – –
T3 – – .6299” – .7087” – – –
X – – .7874” – .9843” – .3740” –
Wt lbs 2.43 3.31 2.90 5.07 4.60 9.70 11.02 21.16
Type A Steel Backplates for Direct and Indirect Mount
View from Chuck Side View from Spindle Side
Direct Mount Adapter Plate Indirect Mount Adapter Plate
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 460
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
461
POW
ERC
OLLET
CH
UC
KS
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Collet Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
5C Plain Back Collet Chucks• Forged Steel body• T.I.R. 0.0004"• 8,000 RPM• Includes wrench
BISON-BIAL’s completeselection of Adapter Plates can be
found on pages 399-404
Description Part Number Retail Price
Collet Pin 7-775-9011 3.81
Mounting Bolts: M10 x 35mm 7-897-1075 3.60
Wrench Included• Part Number 7-862-861
Chuck Dia PartNumber
RetailPrice Mounting Gripping
RangeMax Draw BarPull Force (lbf)
Max Draw BarStroke
Wtlbs
5" 7-775-0521 415.05 Plain Back 3/64 - 1-1/8" 3000 0.1575 5.50
Backplates and Cylinders
5"7-789-5065* 385.89 A2-5
Adapter Plate2.43
7-789-5066* 523.71 A2-6 –
Hydraulic Cylinder without thru-hole,7000 RPM, 1.260" piston stroke
7-796-100A 2,342.13 – – – – –
Type 2904
* For back plate dimensions, see page 460
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 461
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
OLL
ETC
HU
CK
S
462 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Collet Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Dia PartNumber
RetailPrice
Max Draw BarPull Force
(lbf)
MaxDraw Bar
Stroke
Wtlbs
5" 7-775-0551 261.00 3000 0.1575 5.50
Matching Cylinders
Hydraulic Cylinder with 46mm thru-hole, 7100 RPM, 1" piston stroke 7-797-135A 5,047.00 – – –
A2-5 Direct Mount Collet Chucks• Forged Steel body• Threaded Nose 2-3/16"• T.I.R. 0.0004"• 8,000 RPM• Includes wrench
Description Part Number Retail Price
Collet Pin: 10-32 UNEF-2B 7-775-9010 3.15
Mounting Bolts: 7/16-14 x 1-1/2" 7-898-210 4.80
Type 2916
Description Part Number Retail Price
1/16" Steel 7-168-404 14.06
Part Number Retail Price
7-862-865 53.09
Part Number Retail Price
7-460-200 12.50
Part Number Retail Price
7-460-210 26.30
Universal 5 Piece5C Collet Stop Adjustable 5C Collet Stop
Emergency Collets
Wrench Included
• Part Number 7-862-861
Nut 2-3/16" x 10
• Sold separately
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 462
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
463
POW
ERC
OLLET
CH
UC
KS
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Collet Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
16C Collet Power Chucks• Forged Steel body• T.I.R. 0.0004"• 6000 RPM• Includes wrench
Notes: * Chuck Part Number 7-775-0630 uses standardbackplates, see pages 399-404
** Chuck Part Number 7-775-0631 has thesame mounting dimensions as 7-781-0600,see page 454
*** See page 460 for back plate dimensions
ChuckDia
PartNumber
RetailPrice Mounting
MountingBolt
Pattern
GrippingRange
Max DrawBar Pull
Force (lbf)
Max DrawBar Stroke
Wtlbs
6-1/4" 7-775-0631** 477.45 Plain Back 4.126" 0.0625 - 1.625 5290 0.157" 12
WrenchPart
Number
RetailPrice
7-862-860 42.18
7-775-0631
ChuckDia
AdapterPart Number
RetailPrice Mounting*** Wt
lbs
6-1/4"7-789-5065 385.89 A2-5
3.317-789-5066 523.71 A2-6
16C to 5C Adapters• Steel body• Designed to use with power and manual 16C collet chucks• Interchangeable with all 5C collets
Description Part Number Retail Price
Steel Adapter 7-164-890 124.96
Type 1897
Type 2904
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 463
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
SPA
RE
PAR
TS
464 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Chuck Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
5
17
3
4
8
18
11
13
22
10 24
21
1 14 2312 6 7 2 2526 20
28 27
19
15
9
16
1 2 – Wedge Plunger 3 – Master Jaw 4 – Hard Top Jaw 5 – T-nutsChuck Dia Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price
5" – – – – 7-787-305 48.38 7-789-905 13.826-1/4" 7-789-706 189.50 7-789-606 391.50 7-787-306 289.26 7-789-906 31.398" 7-789-708 284.50 7-789-608 453.50 7-787-308 325.05 7-789-908 48.8410" 7-789-710 738.00 7-789-610 771.00 7-787-310 388.02 7-789-910 60.96
12-1/2" 7-789-712 1,031.00 7-789-612 1,287.94 7-787-312 499.32 7-789-912 36.3815-3/4" – – – – 7-787-316 543.78 7-789-916 90.00
Chuck Dia6 – Plunger Ring 7 – Draw Tube Nuts 8 – Cover 9 – Spring 10 – Nut Wrench
Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price5" – – 7-789-0501 41.47 – – – – – –
6-1/4" – – 7-789-0601 66.60 – – – – – –8" – – 7-789-0801 70.44 – – – – – –10" – – 7-789-1001 96.27 – – – – – –
12-1/2" – – 7-789-1201 114.02 – – – – – –15-3/4" – – – – – – – – – –
Chuck Dia20 – Hex Key (mm) 21 – Hex Key (mm) 22 – Hex Key (mm) 23 – Hex Key (mm)
Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price5" – – – – – – – –
6-1/4" 6-999-585 .81 6-999-584 .66 6-999-588 1.14 6-999-588 1.148"
6-999-586 .99
6-999-585 .816-999-590 1.35
6-999-590 1.3510" 6-999-586 .99 – –
12-1/2" – – – – – –15-3/4" – – – – – –
Chuck Dia24 – Hex Key (mm) 25 – Eye Bolt (mm) 26 – Adapter Plate 27 – Adapter Screw 28 – Hex Key (mm)
Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price Part Number Retail Price5" – – – –
See theAdapter Platetable onpage 460
See theAdapter Platetable onpage 460
See theAdapter Platetable onpage 460
See theAdapter Platetable onpage 460
6-999-585 .816-1/4" 6-999-588 1.14 – –8" 6-999-590 1.35 – –10" – – – –
6-999-586 .9912-1/2" – – – –15-3/4" – – – –
Chuck Dia 11 – Screw(mm)
12 – Screw(mm)
13 – Jaw Screw(mm)
14 – ChuckMounting Bolts (mm)
15 – Screw(mm)
16 – SteelBall
17 – GreaseNipple 18 – O-ring
19 – Hex Key mmPart Number Retail Price
5" M4x0.7x8 M6x1x16 M8x1.25x16 M10x1.5x75
M6x1.0x8
– – –
6-999-583 .54
6-1/4" M5x0.8x8 M6x1.0x16 M10x1.5x20 M10x1.5x90 – – –8" M6x1.0x14 M8x1.25x20 M12x1.75x25 M12x1.75x110 – – –10" M8x1.25x16 M8x1.25x25 M12x1.75x30 M16x2x120 – – –
12-1/2" M8x1.25x16 M8x1.25x20 M16x2x30 M16x2x120 – – –15-3/4" M8x1.25x14 M10x1.5x25 M20x2.5x40 M20x2.5x150 – – –
Spare Parts
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 464
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
465
POW
ERC
HU
CK
JAW
SA
ND
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts POWER CHUCKS
Prices are subject to change without notice
Power Jaws and Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber A B C D
H7 F G H BoltSize
Wtlbs
5" 7-787-305 0.9055 2.0866 1.4173 0.3937 0.5118 0.5512
1.5 X 60(Serration)
M8 0.326-1/4" 7-787-306 1.1024 2.5197 1.6929 0.4724 0.4921 0.7874 M10 0.688" 7-787-308 1.378 3.1102 1.9291 0.5512 0.5709 0.9843 M12 1.2410" 7-787-310 1.5748 4.0157 2.126 0.6299 0.748 1.1811 M12 2.25
12-1/2" 7-787-312 1.7717 4.0157 2.2835 0.8268 0.8268 1.1811 M16 2.3815-3/4" 7-787-316 1.9685 5.5118 2.9528 1.0039 1.0623 1.6929 M20 4.76
Part Number Retail Price
7-787-305 48.387-787-306 289.267-787-308 325.057-787-310 388.027-787-312 499.327-787-316 543.78
Part Number Retail Price
7-788-305 82.347-788-306 111.877-788-308 139.777-788-310 169.417-788-312 264.09
Hard Top Jaws, Serration 1.5mm x 60• Sold in sets
Soft Top Jaws, Serration 1.5mm x 60• Sold in sets
ChuckDia
PartNumber A B C D H7 F G H Bolt
SizeWtlbs
5" 7-788-305 0.9055 2.126 0.9843 0.3937 0.4724 0.5512
1.5 X 60(Serration)
M8 0.396-1/4" 7-788-306 1.0236 2.2598 1.1024 0.4724 0.4724 0.7874 M10 0.588" 7-788-308 1.378 3.7402 1.4961 0.5512 0.9449 0.9843 M12 1.7110" 7-788-310 1.5748 4.3307 1.6535 0.6299 1.1811 1.1811 M12 2.63
12-1/2" 7-788-312 1.9685 4.3701 1.9685 0.8268 0.8268 1.1811 M16 3.86
Spare Parts for Chuck Reconditioning
Blank Master Jaws Blank Wedge Plunger (front and back view)Rectangular Jaws6-1/4" thru 12-1/2" Sizes Only
Note: All blank spare partsare oversized and willrequire final grinding
ChuckDia
Blank Master Jaw, 3 piece setPart Number Retail Price Blank Wedge Plunger, 1 piece
Part Number Retail Price
6-1/4" 7-789-606 391.50 7-789-706 189.50
8" 7-789-608 453.50 7-789-708 284.50
10" 7-789-610 771.00 7-789-710 738.00
12-1/2" 7-789-612 1,287.94 7-789-712 1,031.00
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 465
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
SPA
RE
PAR
TS
466 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Power Chuck Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Draw Tube Nuts
ChuckDia
PartNumber
RetailPrice
ThreadL
Hole DiaJ L1 and L2
5" 7-789-0501 41.47 BLANK 12mm 1.40"
6-1/4"
7-789-0642 96.84 M42X1.5 –
0.276"
7-789-0644 61.90 M42X2.0 –
7-789-0650 96.84 M50x1.5 –
7-789-0652 61.90 M55X1.5 –
7-789-0654 96.84 M55X2.0 –
7-789-0601 66.60 BLANK 20mm 1.063"
8"
7-789-0852 89.92 M50X1.5 –
0.417"
7-789-0854 68.10 M50X2.0 –
7-789-10755 186.82 M75x2.0 –
7-789-0862 89.92 M55X1.5 –
7-789-0864 89.92 M55X2.0 –
7-789-0872 89.92 M60X1.5 –
7-789-0874 106.59 M60X2.0 –
7-789-0801 70.44 BLANK 30mm 1.205"
10"
7-789-1074 112.61 M60X2.0 –
0.512"
7-789-1075 150.00 M74x1.5 –
7-789-1076 149.50 M76x1.5 –
7-789-1080 131.91 M80x2 –
7-789-1082 112.61 M85X1.5 –
7-789-1084 131.91 M85X2.0 –
7-789-1001 96.27 BLANK 45mm 1.299"
12-1/2"
7-789-1292 109.50 M100X1.5 –0.650"
7-789-1294 109.50 M100X2.0 –
7-789-1201 114.02 BLANK 50mm 1.437"
Threaded Nut Blank Nut
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:33 PM Page 466
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
467
POW
ERC
HU
CK
SPAR
EPA
RTS
Quality Products • Partnership • Industry Experts POWER CHUCKS
Power Chuck Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Draw Tube Dimension Selections and Assembly
Draw Tube NutDimensions areon page 466
Chuck Dia Cylinder Type a b c d ( f7) e min f max L
6-1/4" 1305-135/46 M 55X2 1.1811 .9843 2.0669 .1969 M 55X2 A + .7480
8" 1305-150/52 M 60X1.5 1.1811 .9843 2.2441 .1575 M 60X2 A + .9449
10" 1305-170/67 M 85X2 1.3780 1.1811 3.2283 .1969 M 85X2 A + 1.0236
12-1/2" 1305-210/86 M 102X2 1.3780 1.3780 3.8976 .1772 M 102X2 A + .9843
• The "L" dimension is calculated after determining the distance between the cylinder back plate andchuck back plate, see the "A" dimension
• The table above shows "L" calculation for a BISON-BIAL 2405 Chuck and a 1305 CylinderFor different cylinders the "L" dimension will be different
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:34 PM Page 467
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
POW
ERC
HU
CK
SPA
RE
PAR
TS
468 POWER CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Power Chuck Spare Parts
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Jaw and Chuck Mounting Bolts
T-Nuts and Bolts• 1 T-Nut per Jaw
ChuckDia
T-NutPart Number
RetailPrice A B C F G H
(h6)Wtlbs
5" 7-789-905 13.82 0.0591 1.0236 0.0591 0.5511 0.2165 0.3937 0.049
6-1/4" 7-789-906 31.39 0.698 1.4173 0.7283 0.7874 0.2953 0.4724 0.086
8" 7-789-908 48.84 0.8071 1.8307 0.8071 0.9843 0.3346 0.5512 0.201
10" 7-789-910 60.96 0.8858 2.0079 0.8465 1.1811 0.3346 0.6299 0.267
12-1/2" 7-789-912 36.38 1.1417 2.185 1.063 1.1811 0.4134 0.8268 0.461
15-3/4" 7-789-916 90.00 1.3386 3.1496 1.2205 1.6929 0.4724 1.0039 0.838
ChuckDia
Jaw Mounting Bolts
Part Number Retail Price Bolt Size
5" 7-789-9055 6.91 M8x1.25-16
6-1/4" 7-789-9065 8.96 M10x1.5-20
8" 7-789-9085 9.38 M12x1.75-25
10" 7-789-9105 9.38 M12x1.75-30
12-1/2" 7-789-9125 9.79 M16x2-30
15-3/4" 7-789-9210 60.00 M20x2.5x40
ChuckDia
Chuck Mounting Bolts, Plain Back
Part Number Retail Price Bolt Size
5" 7-897-1080 3.65 M10x1.5-60
6-1/4" 7-897-1084 4.11 M10x1.5-75
8" 7-897-1114 5.40 M12x1.75-90
10" 7-897-1272 7.56 M12x1.75-100
12-1/2" 7-897-1275 9.00 M16x2-105
15-3/4" 7-897-1679 18.00 M20x2.5x130
ChuckDia
Chuck Mounting Bolts, A2 Mount
Mount Part Number Retail Price Bolt Size
5" A2-5 7-897-1084 9.11 M10x1.5-75
6-1/4" A2-5 7-897-1085 9.89 M10x1.5-85
8" A2-6 7-897-1115 5.40 M12x1.75-110
10"A2-6 7-897-12728 12.50 M16x2-100
A2-8 7-897-1273 8.25 M16x2-120
12-1/2"A2-6 7-897-1275 9.00 M16x2-105
A2-8 7-897-1273 8.25 M16x2-120
T-Nut and Bolts soldseparately
Prices are subject to change without notice
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:34 PM Page 468
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
469
PNEUMATICCHUCKS
Quality Products • Partnership • Industry Experts PNEUMATIC CHUCKS
Prices are subject to change without notice
Pneumatic Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
15-3/4" Plain Back 3-Jaw ChuckPower chuck with wedge system design, self-contained with a large thru-hole
Features:
• Large Thru-Hole• Steel Body• Self-Contained• High Clamping Force• Rapid Jaw Stroke• Extended Jaw Stroke• High Clamping Accuracy• Integral Air Cylinder
Standard Accessories:
• Hard Master Jaws• Jaw T-nuts and Bolts• Air Distributor Ring
Optional Accessories:
• Hard Top Jaws• Adapter Plates
Back View
Hard Top Jaws
Description Part Number* Retail Price
Air Distribution Ring with O-Ring Set 7-790-90016 3,939.84
O-Ring Set for Part Number 7-790-90016 (4 pc set) 7-790-90316 130.02
T-Nut for 1 bolt 7-789-920 57.02
Part Number Retail Price
7-786-316 709.82
Application ExampleMachining of Pipe Ends with Couplings
Double Jaw StrokeRapid Stroke and Extended (Gripping) Stroke
T1 Rapid StrokeT2 Extended Stroke
(slow gripping movement)A Rapid Stroke RangeB Gripping Range
fixed air distributor rings
Type 2500
15-3/4" BISON-BIAL Air Distribution Ringwith O-Ring Set
Part Number Retail Price
7-785-1600 27,287.34
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:46 PM Page 469
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
PNEUMATICCHUCKS
470 PNEUMATIC CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Pneumatic Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Part Number Retail Price
7-785-1600 27,287.34
Chuck Parameters Unit Value
Operating Pressure (max/min) bar 3-5 / 10
Air Consumption / Jaw Stroke at 5 bar dm3 3.7
Total Gripping Force at 5 bar daN 9,000
Maximum Speed RPM min-1 1,300
Moment of Intertia kg•m2 6.0
Weight without the Top Jaws lbs 463.0
Chuck Dimensions inch mm
N G 3/8"
O .4724 12
R (g6) 8.0701 205
S .1575 4
T .1378 3.5
U .1969 5
V 1.2992 33
b min 3.9370 100
b max 4.6850 119
c min .6102 15.5
c max 2.6772 68
d M20
e 1.5748 40
f 4.7244 120
g (H7) 1.0040 25.5
h 2.3622 60
Chuck Dia 15-3/4" 400
Chuck Dimensions inch mm
Thru Hole P 5.5118 140
A 17.7165 450
A1 19.0157 483
Clamping Stroke per Jaw .2756 7
Rapid Stroke per Jaw .4724 12
Total Stroke per Jaw a .7480 19
B 9.2126 234
C 9.4094 239
D (H6) 12.2047 310
E .3150 8
F 14.7244 374
G 9 x M16
H 1.1811 30
J 15.7480 400
K (H9) 16.3386 415
L 16.9291 430
M 1.0236 26
Part Number: 7-785-1600
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:46 PM Page 470
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
471
PNEU
MA
TICC
HU
CK
S
Quality Products • Partnership • Industry Experts PNEUMATIC CHUCKS
Prices are subject to change without notice
Pneumatic Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Chuck Parameters Unit Value
Maximum Operating Pressure bar 10
Air Consumption / Jaw Stroke dm3 3.7
Total Gripping Force daN 17,000
Maximum Speed RPM min-1 1,000
Moment of Intertia kg•m2 16.0
Weight without Top Jaws lbs 739.0
Chuck Dimensions inch mm
N R 3/8"
O .7874 20
R (g6) 12.047 306
S .1575 4
T .1575 4
V 1.4567 37
b min 5.8740 149.2
b max 6.8740 174.6
c min .6102 15.5
c max 3.1890 81
d M20
e 1.4961 38
f 5.1772 131.5
g (H7) 1.004 25.5
h 2.3622 60
Part Number Retail Price
7-785-2000 49,124.88
Chuck Dia 20" 500
Chuck Dimensions inch mm
Thru Hole P 9.055 230
A 22.441 570
A1 24.213 615
Clamping stroke per Jaw .3386 8.6
Rapid stroke per Jaw .6614 16.8
Total Stroke per Jaw a 1.000 25.4
B 10.906 227
C 11.1024 282
D (H6) 16.339 415
E .3150 8
F 18.661 474
G M12
H 1.0236 26
J 19.685 500
L 21.654 550
M 1.0236 26
20" Diameter, 3-Jaw Heavy Duty Pneumatic Power ChuckPlain Back with Large Thru-Hole
Type 2500-500-230
• Thru-hole diameter: 9.055" (230 mm)• Steel hardened and ground body• Self-contained with integral air cylinder• Extended 1" jaw stroke
• High clamping accuracy• Each chuck is provided with safety valve• 12 mounting bolts
Back View
Part Number: 7-785-2000
BISON_Sel-Pneu_346-471.qxd:Layout 1 4/21/11 11:34 PM Page 471
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Indexers and Face PlatesIN
DEX
ERS
AN
DFA
CE
PLA
TES
472 INDEXERS AND FACE PLATES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
With Chuck Without ChuckA B C D Thru Hole
Dia D E F G H L WtlbsPart Number
6-1/4" 7-609-006 2,047.50 7-609-016 1,511.58 4.92 11.85 8.27 6.30 1.653
.71
5.51 .55 8.66 9.65 72
8" 7-609-008 2,347.89 7-609-018 1,699.39 6.30 15.04 10.43 7.87 2.165 6.30.71
9.72 11.81 127
12-1/2" 7-609-012 4,721.64 7-609-022 3,967.42 9.84 21.85 16.24 12.40 4.055 7.87 12.24 15.75 317
Type 5902: 6-1/4" and 8" diameter super spacershave a friction bearing
Type 5912: 12-1/2" diameter super spacerhas a special heavy duty roller bearing
Optional Accessories:
Tailstock7-610- 1...
7-610-
Super Spacer withmounted face plate
Horizontal/Vertical Super Spacers• New improved horizontal and vertical super spacers havequick and easy to change dividing plates
• Designed for milling, drilling, jig boring, and related machining operations• Fixtures are also used to index parts that are being inspected• Significantly increases productivity by reducing the time requiredto position the workpiece on the machine
New compact design provides a wide variety of dividingAngular Indexing that can be performed throughthe graduated ring from 0° to 360° in increments of 1°Direct Indexing is done by means of a special dividingmechanism permitting divisions in 2, 3, 4, 6, 8, 12,and 24 without any disassembly operationsSpecial Indexing is used to obtain divisions not listed above
We offer additional quick change dividing plates which canbe easily mounted to the super spacer belowSee next page for sizes
Accuracy:Maximum total spacing error: 2'Squareness of chuck to base: .0008" maxParallelism over face: .0008" maxChuck concentricity (universal): .0015" T.I.R.maxChuck concentricity (SET-TRU): .0015" T.I.R.maxCenter hole concentricity: .0008" T.I.R.maxMounting flange concentricity: .0008" T.I.R.max
Standard Accessories:
• 2 Mounting bolts with T-nuts• 2 Hex keys• 1 Chuck wrench
• 2 Eye bolts• 2 Locating keys
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:57 PM Page 472
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
473
IND
EXER
SA
ND
FAC
EPLA
TES
Indexers and Face Plates
Quality Products • Partnership • Industry Experts INDEXERS AND FACE PLATES
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
TailstockPart Number
RetailPrice
Face PlatePart Number
RetailPrice
6-1/4" 7-610-106 568.44 7-610-506 153.27
8" 7-610-108 682.62 7-610-508 193.92
12-1/2" 7-610-112 999.24 7-610-512 438.30
ChuckDia
SpacerwithoutChuck
Part Number
RetailPrice
Front MountingChucks4-Jaw
Part Number
RetailPrice
Front MountingChucks3-Jaw
Part Number
RetailPrice
6-1/4" 7-609-016 1,511.58 7-814-0600 669.00 7-813-0600 659.00
8" 7-609-018 1,699.39 7-814-0800 782.22 7-813-0800 826.92
12-1/2" 7-609-022 3,967.42 7-814-1200 1,427.55 7-813-1200 1,514.88
Chucks and Super Spacers
Tailstocks and Face Plates
Optional AccessoriesOptional Dividing Plates
• Designed for fast and easy replacement
# of Teeth # of Divisions 6"Part Number
RetailPrice
8"Part Number
RetailPrice
12"Part Number
RetailPrice
24 2, 3, 4, 6, 8, 12, 24 7-609-0701 142.34 7-609-0735 456.42 – –
23 23 7-609-0703 142.34 7-609-0737 186.78 7-609-0767 319.39
22 2, 11, 22 7-609-0705 142.34 – – 7-609-0769 319.39
21 3, 7, 21 7-609-0707 142.34 7-609-0741 186.78 7-609-0771 319.39
20 2, 4, 5, 10, 20 7-609-0709 271.17 – – – –
19 19 7-609-0711 142.34 7-609-0745 186.78 7-609-0775 319.39
18 2, 3, 6, 9, 18 – – 7-609-0747 186.78 – –
17 17 7-609-0715 142.34 7-609-0749 186.78 7-609-0779 319.39
16 2, 4, 8, 16 – – 7-609-0751 456.42 – –
15 3, 5, 15 – – 7-609-0753 186.78 – –
14 2, 7, 14 – – 7-609-0755 186.78 7-609-0785 319.39
13 13 7-609-0723 142.34 7-609-0757 186.78 7-609-0787 319.39
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:57 PM Page 473
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Indexers and Face PlatesIN
DEX
ERS
AN
DFA
CE
PLA
TES
474 INDEXERS AND FACE PLATES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Number PartDescription
Size of Super Spacer
6"Part Number
RetailPrice
8"Part Number
RetailPrice
12"Part Number
RetailPrice
1 Base 7-609-0106 2,347.89 7-609-0108 2,347.89 7-609-0112 2,347.89
2 Spindle 7-609-0206 On Request 7-609-0208 On Request 7-609-0212 On Request
3 Driving Plate – – – – – –
4 Sleeve – – – – – –
4a MT Sleeve – – – – – –
5 Indexing Collar 7-609-0506On Request
7-609-0508On Request
7-609-0512 On Request
6 Clamping Collar 7-609-0606 7-609-0608 7-609-0612 298.00
7 Dividing Plate 7-609-0701 142.34 7-609-0735 456.42 – –
8 Driving Collar 7-609-0806On Request
7-609-0808On Request
7-609-0812On Request
9 Back Cover 7-609-0906 7-609-0908 7-609-0912
10 Clamping Bar – – 7-613-0708 24.55 7-613-0712 31.89
11 Head – – 7-613-0808 16.04 – –
12 Handle – – 7-613-0908 11.06 – –
13 Set Screw M4X0.7X5 – M6X1X6 – M6X1X6 –
14 Handle Ball 7-613-2406 .67 7-613-2408 .84 – –
15 Roller Pin – – 7-613-1408 7.87 – –
16 Pin 7-613-1306 4.82 7-613-1308 5.66 7-613-1312 7.84
17 Click Pin 7-613-1206 36.86 7-613-1208 53.70 7-613-1212 53.60
18 Spring 7-613-1806 3.93 7-613-1808 4.65 7-613-1812 5.26
19 Screw M12X1.75X16 – M16X2X23 – M20X2.5X60 –
20 Brake Spring 7-613-1906 1.91 7-613-1906 1.91 7-613-1906 1.91
21 Brake Sleeve 7-613-1506 13.28 7-613-1506 13.28 7-613-1506 13.28
22 Brake Roller 7-613-2306 12.29 7-613-2306 12.29 7-613-2306 12.29
23 Key and Screw – – – – – –
24 Key Screw M6X1X14 – M6X1X14 – M6X1X14 –
25 T-Bolt – – 7-613-2208 41.58 – –
26 T-Bolt Nut – – – – – –
27 T-Bolt Washer – – – – – –
Replacement Parts for Horizontal/Vertical Super Spacers
Specs continuedon next page
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 474
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
475
IND
EXER
SA
ND
FAC
EPLA
TES
Indexers and Face Plates
Quality Products • Partnership • Industry Experts INDEXERS AND FACE PLATES
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Number PartDescription
Size of Super Spacer
6"Part Number
RetailPrice
8"Part Number
RetailPrice
12"Part Number
RetailPrice
28 Marking Plate 7-609-2806 On Request 7-609-2808 On Request 7-609-2812 On Request
29 Set Screw M5X0.8X8 – M5X0.8X8 – M5X0.8X8 –
30 Bolt M8X1.25X35 – M10X1.75X40 – M16X2X65 –
31 Washer 7-609-3106 On Request 7-609-3108 On Request 7-609-3112 On Request
32 Pin – – – – – –
33 Bolt M6X1X41 M6X1X46 M10X1.5X75
34 Dividing Pin – – – – – –
35 Grease Nipple N/A – N/A – N/A –
36 Bolt M8X1.25X30 – M10X1.75X40 – M12X1.75X60 –
37 Cover Screws – – – – – –
38 Bolt M6X1X20 – M8X1.25X20 – M12X1.75X35 –
39 Washer 7-609-3906On Request
7-609-3908On Request
7-609-3912On Request
40 Washer 7-609-4006 7-609-4008 7-609-4012
41 Driving Handle – – 7-613-4408 11.39 – –
42 Locking Nut – – – – – –
43 Ball 7-613-2406 .67 7-613-2408 .84 – –
44 Cap Screws M6X1X20 – M8X1.25X20 – M8X1.25X20
45 Bearing Discs N/A – N/A – 7-609-945 453.09
46 Bearing N/A – N/A – 7-609-946 315.20
47 Bearing N/A – N/A – 7-609-947 393.98
48 Bearing Discs N/A – N/A – 7-609-948 224.58
49 Bearing N/A – N/A – 7-609-949 118.21
50 Chuck Bolts M10X1.5X70 – M10X1.5X80 – M20X2X100 –
51 Chuck 7-813-0600 659.00 7-813-0800 826.92 7-813-1200 1,514.88
52 Hex Key 6-999-588 1.14 6-999-588 1.14 – –
53 Hex Key 6-999-585 .81 6-999-586 .99 6-999-586 .99
54 Hex Key 6-999-586 .99 6-999-588 1.14 6-999-590 1.35
Replacement Parts for Horizontal/Vertical Super Spacers
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 475
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Indexers and Face PlatesIN
DEX
ERS
AN
DFA
CE
PLA
TES
476 INDEXERS AND FACE PLATES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TableSize
SetPart Number
RetailPrice
Number of Divisions (Holes)
Plate Number I Plate Number II Plate Number III
6-1/4" and 8" 7-622-008 426.6023, 25, 28, 34,36, 38, 44
21, 26, 29, 32,33, 39, 43
20, 24, 27, 31,36, 37, 41
10", 12", 16" 7-622-016 511.5624, 25, 26, 28, 32,34, 38, 44, 46
16, 17, 19, 21, 29,33, 39, 43, 49
15, 18, 20, 23, 27,31, 37, 41, 47
20" 7-622-020 810.1224, 25, 28, 34, 38,39, 44, 46, 49
21, 29, 32, 33, 43,53, 59, 61, 63
15, 26, 27, 31, 36,37, 41, 47, 65
Horizontal/Vertical Low Profile Rotary Tables
• Tables can be used horizontally and vertically• Rigid, low profile, compact design providesfor three types of dividingAngular Indexing can be performed through thegraduated ring from 0° to 360° in increments of 1°Rapid Indexing is done by means of a specialdividing mechanism in divisions 2, 3, 4, 6, 8, 12,and 24 without any disassembly operationIndexing with the set of special dividing plates
• Disengageable worm gear permits direct and rapid indexing• Semi-Steel table body
TableSize
Part Numberwith
DividingPlates
RetailPrice
Part NumberwithoutDividing
Plates
RetailPrice A B C D H F G E L Worm
RatioThruHoles
CenterHoleMT
Wtlbs
6-1/4" 7-621-006 2,622.09 7-621-0060 1,574.70 8.9 7.9 3.54 6.3.551
4.92.394
3.78 5.001:60
.827
3
44
8" 7-621-008 2,954.25 7-621-0080 1,348.17 10.6 9.5 3.74 7.87 5.91 3.86 5.791.378
55
10" 7-621-010 3,509.34 7-621-0100 1,609.17 12.5 11.24.53
9.84
.709
6.89.472
4.52 6.89
1:90
121
12" 7-621-012 3,957.18 7-621-0120 1,818.48 14.7 13.7 12.6 7.87 4.72 8.15 1.417 176
16" 7-621-016 5,350.29 7-621-0160 2,174.31 18.3 16.9 4.92 15.7 9.84 .551 5.31 9.76 1.969 4 269
20" 7-621-020 7,937.64 7-621-0200 5,033.16 22.9 21.1 6.69 19.7 12.4 .630 6.89 12.2 1:120 2.559 5 573
Table with MountedDividing Plateand Handle
Table with MountedCrank Wheel
Sets are provided with threedividing plates and one handleSets of Dividing Plates with Handle
Optional Accessories:
7-811- 7-610-8..7-872-7-814-7-812-
Type 5859
Accuracy:
• Squareness of clamping surface to base: .0008" max• Parallelism of clamping surface to base: .0008" max• Flatness of clamping surface: .0008" max• True running of MT center hole: .0004" max• Indexing accuracy: 1'
Standard Accessories:
• 2 Mounting bolts with nuts• Crank wheel• 3 Dividing plates with one handle
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 476
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
477
IND
EXER
SA
ND
FAC
EPLA
TES
Indexers and Face Plates
Quality Products • Partnership • Industry Experts INDEXERS AND FACE PLATES
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Size ofSuperSpacer
TailstockPart Number
RetailPrice
Dead CenterPart Number
RetailPrice
H+.002" K B A
F KeySize
E
MTNumber
Wtlbs
min max
5" 7-610-104 524.64 7-540-002 19.80 3.937 5.51 3.157.68
1.30 2.480.55 2
14
6-1/4" 7-610-106 568.44 7-540-002 19.80 4.921 7.01 3.54 1.54 2.72 16
8" 7-610-108 682.62 7-540-003 25.79 6.299 8.39 4.53 9.84 1.89 3.350.71
3 28
12-1/2" 7-610-112 999.24 7-540-004 39.87 9.843 11.93 5.91 11.02 2.34 3.92 4 51
TailstockPart Number
RetailPrice
Dead CenterPart Number
RetailPrice
Hmin-max
Fmin-max L K
max B E(H7)
Cmax
MTNumber
Wtlbs
7-610-806 999.90 7-540-002 19.80 3.74-5.12 1.57-2.76 13.19 6.10 3.94 .55 7.2 2 26.5
7-610-808 1,015.95 7-540-003 25.79 5.12-6.691.97-3.54
16.10 7.87 4.72
.71
8.83
41.5
7-610-810 1,128.00 7-540-003 25.79 6.69-7.87 17.05 9.06 5.59 10 56.0
7-610-816 1,475.64 7-540-004 39.87 8.66-9.84 2.36-3.94 18.31 11.22 6.46 12 4 95.0
Tailstocksfor Horizontal/Vertical Super Spacers
• Rigid and precision design
Tailstocks are provided with
• Precision dead center with .0002" T.I.R.• 2 Locating keys• 2 Mounting bolts with T-nuts
Optional centers can be found on page 506
Type 5819 Type 5819
Type 5818 Type 5818
Adjustable Tailstocksfor Horizontal/Vertical Super Spacers or for usewith any Rotary Table
• Rigid and precision design• Tailstocks are adjustable in two directions (all F and H)
Tailstocks are provided with
• A precision dead center with .0002" T.I.R.• 2 Locating keys• 2 Mounting bolts with T-nuts
Optional centers can be found on page 506
6", 8", and 12"Super Spacer
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 477
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Indexers and Face PlatesIN
DEX
ERS
AN
DFA
CE
PLA
TES
478 INDEXERS AND FACE PLATES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
DiaA
PartNumber
RetailPrice H B D C
[+.008] M FT-slot G
[+.008]WtlbsE Bolt
6-1/4" 7-610-506 153.27 1.18 4.921 1.18 0.157M10x1.5 0.59
.47 3/8 5.512 8.6
8" 7-610-508 193.92 1.38 6.299 1.570.197
.55 1/2 6.929 12
12-1/2" 7-610-512 438.30 1.97 10.236 1.97 M16x2 1.02 .71 5/8 11.260 43
Face Plates
• Designed for use with BISON-BIAL horizontal/vertical super spacers• Can also be mounted with an adapter plate on any lathe spindle nose
Type 9440
Base Plates for Back Mount ONLY• Designed for use with BISON-BIAL 2, 3, and, 4-jaw self-centering Plain Backlathe chucks, Back Mount ONLY with a Semi-Steel or Forged Steel bodyas well as for use with 2, 3, 4, and 6-jaw SET-TRU chucks
• Perfect for milling and drilling operations
Base plates are provided with
• 2 Mounting bolts with T-nuts• 2 T-slot keys• 1 Chuck wrench with sliding T-bar
Chucks are sold separately
Type 9452Type 9450
ChuckDia
Plate for Universal Chucks Plate for SET-TRU ChucksA B h Wt
lbsPart Number Retail Price D E F Part Number Retail Price D E F
6-1/4" 7-630-006 243.03 4.9213 5.5118 3.543 7-630-606 248.70 3.386 5.5118 2.36 9.84 7.48 1.10 10.3
8" 7-630-008 274.50 6.2992 6.9291 5.118 7-630-608 285.63 4.331 6.9291 2.76 11.81 9.21 1.26 16.2
10" 7-630-010 353.31 7.8740 8.8189 5.787 7-630-610 341.67 5.708 8.8188 3.94 13.94 11.50 1.26 25.0
12-1/2" 7-630-012 480.69 10.2362 11.2598 6.690 7-630-612 430.92 7.087 11.25984.72
16.77 14.25 1.57 35.5
15-3/4" 7-630-016 600.21 12.9921 14.2519 6.693 7-630-616 438.84 11.750 6.7500 20.47 17.72 1.89 51.2
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 478
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
479
IND
EXER
SA
ND
FAC
EPLA
TES
Indexers and Face Plates
Quality Products • Partnership • Industry Experts INDEXERS AND FACE PLATES
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Base Plates for Front Mount Chucks• Designed for use with BISON-BIAL 2, 3, and 4-jawfront mounting self-centering lathe chucks, andfor use with 2, 3, 4, and 6-jaw SET-TRU chucks
• Ideal for use on milling and drilling machines aswell as on rotary tables with 3/6 and 4/8 slots
Base plates are supplied with
• 4 Mounting bolts with T-nuts• 1 MT Pin
Chucks are sold separately
ChuckDia
MT Pin
PartNumber
RetailPrice MT
5" 7-872-932 13.05 2
6-1/4"
7-872-933 14.28 38"
10"
12-1/2"
15-3/4" 7-872-934 15.57 4
20" 7-872-935 54.00 5
ChuckDia
Base Plates for Universal Chucks
PartNumber
RetailPrice H Wt
lbs
5" 7-872-305 257.91 0.57 3.8
6-1/4" 7-872-306 200.79 0.65 5.5
8" 7-872-308 273.27 0.77 7.7
10" 7-872-310 300.90 0.81 12.9
12-1/2" 7-872-312 520.26 1.00 23.9
15-3/4" 7-872-316 432.42 1.08 40.32
20" 7-872-320 791.34 1.57 90.0
Bolt and T-nut
PartNumber
RetailPrice
7-872-905 9.39
7-872-906 14.58
7-872-910 11.22
7-872-916 8.55
Base Plates for SET-TRU Chucks
PartNumber
RetailPrice H Wt
lbs
7-872-605 187.35 .57 3.9
7-872-606 220.71 .69 11.5
7-872-608 270.06 .77 16.8
7-872-610 305.34 .81 27.4
7-872-612 421.50 1.00 46.3
7-872-616 605.61 1.18 40.0
7-872-620 922.26 1.50 77.0
Type 8298Type 8293
Back View
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 479
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Indexers and Face PlatesIN
DEX
ERS
AN
DFA
CE
PLA
TES
480 INDEXERS AND FACE PLATES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
4-Jaw Self-Centering, Low Profile Forged Steel Body Machine Fixturewith Rectangular Base
• Ideal for all types of milling, grinding, drilling,and tapping operations on vertical and horizontalCNC machines and conventional milling and grinding machines
• All surfaces are hardened and precision ground,square and parallel to an accuracy of 0.0008"
• BISON-BIAL’s precision Steel body 4-jaw scroll chuckguarantees repeatability within 0.0004" T.I.R.
• Ideal for pallet applications
Dia PartNumber
RetailPrice A Q B K C D E E1 F G H M=P S T
Clamping Range WtlbsOD ID
6-1/4" 7-640-006 957.27 8.46 6.50 2.48 1.69.709
1.772.5512
.7087
.980 .433 2.64 5.669.55
1.65 .1181-6.30 1.65-5.75 35
8" 7-640-008 1,446.66 9.84 7.87 2.84 1.77 2.3622 1.06 .551 3.15 6.850 2.17 .1575-7.48 1.97-7.84 51
10" 7-640-010 1,701.51 12.2 9.84 3.27 2.05 .846 3.150 .7087 1.25 .630 3.74 8.583 .71 2.99 .1968-9.84 2.28-9.25 81
ChuckDia
Hard TopJaws
RetailPrice
Hard MasterJaws
RetailPrice Scroll Retail
Price Pinion RetailPrice
6-1/4" 7-883-406 229.05 7-885-406 222.72 7-887-506 184.50 7-886-506 40.50
8" 7-883-408 301.38 7-885-408 243.93 7-887-508 227.43 7-886-508 47.82
10" 7-883-410 342.18 7-885-410 312.27 7-887-510 307.08 7-886-510 57.63
ChuckDia
AngledWrench
RetailPrice
RatchetWrench
RetailPrice
MountingBolt
RetailPrice
6-1/4"7-640-908 13.10
7-640-926 17.227-640-948 10.00
8" 7-640-928 13.10
10" 7-640-910 15.20 7-640-930 19.97 7-640-950 11.20
Spare Parts
Type 9419
Standard Accessories:
• 1 Set of two-piece reversible jaws(Hard Top and Hard Master Jaws)
• 1 Ratchet wrench• 1 Angled wrench• 1 Set of 2 mounting bolts withT-nuts and two T-slot keys
Optional Accessories:
• Soft top jaws, part number series 7-884-
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 480
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
481
RO
TATIN
GC
HU
CK
S
Rotating Chucks
Quality Products • Partnership • Industry Experts ROTATING CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Self-Centering Chucks with Fine Adjustment SET-TRU.0005" T.I.R. Repeatability• These precision chucks are used in tailstocks for jobs wherecenters cannot be used, such as tube machining
• Steel body construction, with hardened andground scroll and pinions
• Hardened and ground MT spindle• Sealed ball bearings, lubrication through oiler• 4 fine adjustment screws provide .0005" T.I.R. repeatability• Threaded end with threaded plug with tang
Standard Accessories for 4" Diameter Chucks:
• 2 Sets of hard solid jaws (ID and OD)• 1Wrench• 1 Hex key
ChuckDiaD
Rotating Chuck Body Only Clamping RangeL L1 L2 h Thread
dRPMmax
MTNumber
WtlbsPart Number min max
4" 7-861-0400 –
0.12
3.27 8.70 5.24 2.68 0.67 1/2 - 13 2500 3 14.9
5" 7-861-0500 7-861-9500 4.92 9.65 6.12 2.81 0.795/8 - 11
2000 4 22.7
6-1/4" 7-861-0600 7-861-9600 6.30 11.22 6.16 2.70 1.26 1800 5 52
Rotating ChuckPart Number
RetailPrice
Body OnlyPart Number
RetailPrice
7-861-0400 1,265.40 – –
7-861-0500 1,482.75 – –
7-861-0600 1,658.31 7-861-9600 628.42
Type 9165Type 9164
Standard Accessories for 5" and 6" Diameter Chucks:
• 1 Set of two-piece reversible jaws(Hard Top Jaws and Hard Master Jaws)
• 1Wrench• 1 Hex key
Optional Accessories:
• 4" diameter: Soft solid jaws• 5" and 6" diameters: Soft top jaws• 4" and 6" diameters: Jaw SET-TRU chuck• 5" diameter: 5C collet chuck• 5" and 6" diameters: rotating body
Rotating chucksare provided inwooden case
5" and 6" diameters with American StandardTongue and Groove Jaws
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 481
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Rotating ChucksR
OTA
TIN
GC
HU
CK
S
482 ROTATING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Self-Centering Chucks with MT Shanks• These precision rotating chucks are used in tailstock for jobswhere centers cannot be used such as tube machining
• Steel body construction, with hardened and groundscroll and pinions
• Hardened and ground MT shank• Sealed ball bearings, lubrication through oiler• 3-Jaw lathe chucks can be easily removed and replaced with:
4-Jaw scroll chucks (5" and 6" diameters)Face plates (6" diameter)Tapered heads (3" to 5" diameters)5C collet chucks (5" diameter)
• 5" and 6" diameters with American StandardTongue and Groove Jaws
ChuckDiaD
SolidJaws*
2-PieceJaws*
BodyOnly**
AdapterOnly*** MT
NumberClamping Range
L L1 L2 RPMmax
Wtlbs
Part Number min max
3"7-860-0300
–7-573-032
–2 0.08 2.80 6.99 3.84 1.73
40008.0
– 7-573-033 3 – – – – – –
4"7-860-0400
–7-573-043 7-860-7004 3 0.12 3.66 8.09 4.19
2 350013.5
– 7-573-044 7-860-7004 4 – – – – –
5"7-860-0500 7-865-0500 7-573-054 7-860-7005 4
0.12 4.929.63 4.78 2.0
320025
– – 7-573-055 7-860-7005 5 11.4 5.20 2.2 32
6-1/4" 7-860-0600 7-865-0600 7-573-065 7-860-7006 5 0.12 6.3 11.77 5.24 2.56 3000 34
SolidJaws*
Part Number
RetailPrice
2-PieceJaws*
Part Number
RetailPrice
BodyOnly**
Part Number
RetailPrice
Adapter Only***Part Number
RetailPrice
7-860-0300 619.74– –
7-573-032 176.13– –
– – 7-573-033 176.13
7-860-0400 678.66– –
7-573-043 206.24 7-860-7004 120.26
– – 7-573-044 206.24 7-860-7004 120.26
7-860-0500 809.61 7-865-0500 904.50 7-573-054 391.44 7-860-7005 145.73
– – – 7-573-055 391.44 7-860-7005 145.73
7-860-0600 1,053.42 7-865-0600 1,135.50 7-573-065 437.29 7-860-7006 179.97
Type 9154 Type 9155
Standard Accessories for 3" and 4" diameter chucks:
• 2 Sets of hard solidjaws (ID and OD)
Standard Accessories for 5" and 6" diameter chucks:
• 1 Set of two-piece reversible jaws(Hard Top Jaws and Hard Master Jaws)
• 1Wrench• 1 Hex key
Optional Accessories:
• 3" and 4" diameters: Soft solid jaws• 5" and 6" diameters: Soft top jaws• 3" thru 5" diameters: Special tapered heads• 6" diameter: Face plate and 5" diameter 5C collet chuck
Part Number: 7-860-0600 Part Number: 7-865-0600 Part Number: 7-573-
Part Number:7-850-
Part Number:7-814-
Part Number:7-573-
Part Number:7-862-0501
• 1Wrench• 1 Hex key
* Tanged end**Threaded end*** 4- Jaw Independent chucks only
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 482
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
483
RO
TATIN
GC
HU
CK
SPAR
EPA
RTS
Rotating Chuck Spare Parts
Quality Products • Partnership • Industry Experts ROTATING CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
Hard MasterJaws
3 Pc SetPart Number
RetailPrice
Hard TopJaws
3 Pc SetPart Number
RetailPrice
Hard Solid JawsSoft Top Jaw
1 PcPart Number
RetailPrice
OD3 Pc Set
Part Number
RetailPrice
ID3 Pc Set
Part Number
RetailPrice
4" – – – – 7-880-304 109.86 7-881-304 99.54 – –
5" 7-885-305 144.33 7-883-305 160.02 – – – – 7-884-305 16.00
6-1/4" 7-885-306 154.47 7-883-306 196.29 – – – – 7-884-306 18.90
ChuckDia
Scroll1 Pc
Part Number
RetailPrice
Pinion1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
FineAdjustmentScrews 1 Pc
Part Number
RetailPrice
4" 7-887-304 106.44 7-886-304 30.877-889-005 32.52
7-897-6041 9.54
5" 7-887-505 155.46 7-886-505 36.90 7-897-6051 10.30
6-1/4" 7-887-506 184.50 7-886-506 40.50 7-889-008 34.59 7-897-6061 13.15
Spare Parts
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 483
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Rotating ChucksR
OTA
TIN
GC
HU
CK
S
484 ROTATING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw Heavy Duty Self-Centering Chucks with MT ShankFeatures:
• Heavy duty rotating chucks are used in tail stocks for jobs where lathe centers cannot be used, i.e., tube machining• Forged Steel body construction, with hardened and ground MT shank• Scroll, pinions and Master Jaws are standard BISON-BIAL parts• Chucks are provided with two precision heavy duty roller bearings and one ball thrust bearing
Standard Accessories:
• 1 Set of Master Jaws• Mounting bolts• 1Wrench
Optional Accessories:
• Soft top jaws
ChuckDiaA
Hard TopJaws
Part Number
RetailPrice
Soft TopJaws
Part Number
RetailPrice
Hard MasterJaws
Part Number
RetailPrice
ScrollPart Number
RetailPrice
PinionPart Number
RetailPrice
12-1/2" 7-883-3120 413.70 7-884-312 42.10 7-885-312 299.22 7-887-512 407.28 7-886-512 71.16
15-3/4" 7-883-3160 558.34 7-884-316 54.40 7-885-316 397.56 7-887-516 978.21 7-886-516 94.80
ChuckDiaA
PartNumber
RetailPrice
MTNumber B C L M RPM
max
Max LoadCapacity
lbs
Wtlbs
12-1/2" 7-843-1295 4,352.76 5 4.91 5.17 10.26 5/8 - 11 UNC 300 5500 135
15-3/4" 7-843-1695 6,796.68 6 5.69 6.00 13.17 1 - 8 UNC 200 13000 237
Type 9188
Spare Parts
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 484
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
485
CO
LLETC
HU
CK
S
Collet Chucks
Quality Products • Partnership • Industry Experts COLLET CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
5C High Speed Collet Chucks
Type 3974-4
Mini High Speed 0.0004"• 8000 RPM• Forged Steel Body• 4" Diameter
Type 3911
Universal 0.0004"• 6000 RPM• Forged Steel Body• 5" Diameter• Plain Back Part Number 7-862-0501
Type 3974-5C
Threaded 0.0004"• 6000 RPM• Forged Steel Body• Threaded nose 2-3/16-10• Adapters: A, D1, L, DIN, and Threaded
Type 3960
SET-TRU 0.0004"• 6000 RPM• Forged Steel Body• Adapters: A, D1, L, DIN, and Threaded
Type 3975
TRU Length 0.0004"• 6000 RPM• Forged Steel Body• Adapters: A, D1, L, DIN, and Threaded
• Plain Back Part Number 7-862-0401• See page 486
• D1 and Threaded Direct MountPart Number 7-862-0501
• See page 487
• 5" Diameter• Plain Back Part Number 7-862-0502• See page 487
• 5" Diameter• Flat Back Part Number 7-862-0505• See page 489
• 5" Diameter• Plain Back Part Number 7-862-0503• See page 487
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:58 PM Page 485
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Collet ChucksC
OLL
ETC
HU
CK
S
486 COLLET CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia Spindle Size Part Number Retail Price
4"
1" -10 7-922-043 110.46
1-1/8" 12W 7-922-045 110.46
1-1/2" - 8 7-922-046 80.70
D1-4 7-878-044 136.41
Mini High Speed Plain Back 5C Collet Chuckswith 4" O.D., 8000 RPM, 0.0004" T.I.R.
• High quality Forged Steel body• Designed for use with all 5C collets• 3 pinion design• Can be used for turning, facing, boring, grinding, and millingoperations on center lathes and grinding machines
• The simple key operated scroll provides a uniform, distortion freeclamping of work pieces and low collet exchange times
• Their simple design, rugged construction, and fine workmanshipassures high quality and long service life
• Scroll is fully hardened and ground for longer life• Pinions are hardened and ground• Each chuck is balanced within fine limits
Standard Accessories:
• 1 Chuck wrench• 2 Sets of mounting bolts (front and back)• 1 Hex key
Adapter plates for D and Threaded spindles as well as 5Cadjustable collet stop for the 5C collet chuck are available
Description Part Number Retail Price
1/16” Steel 7-168-404 14.06
Part Number Retail Price
7-460-200 12.50
Part Number Retail Price
7-460-210 26.30
Collet Sets
Emergency Collets
Finished Adapter Platesfor Threaded and D1Lathe Spindles
Universal 5 Pc 5C Collet Stop
Adjustable 5C Collet Stop
Type 3974-4
ChuckDia
PartNumber
RetailPrice Mounting 5C Collet
CapacityWtlbs
4" 7-862-0401 564.54 Plain Back 3/64 x 1-1/8 7.0
Collet Sets Part Number Retail Price
18 piece 1/16 - 1-1/8 by 16ths 7-168-168 318.00
24 piece 3mm - 26mm by 1mm 7-168-674 345.94
Spare Parts Part Number Retail Price
Scroll 1 Pc 7-887-103 102.66
Pinion 1 Pc 7-886-103 26.14
Wrench 1 Pc 7-889-103 31.42
Spare Parts Part Number Retail Price
Front Mounting Bolt 1 Pc 7-862-977 9.54
Back Mounting Bolt 1 Pc 7-862-972 9.00
Hex Key 1 Pc 6-999-586 .99
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 486
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
487
CO
LLETC
HU
CK
S
Collet Chucks
Quality Products • Partnership • Industry Experts COLLET CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
PartNumber
RetailPrice Mounting Type 5C Collet Holding Capacity
inchesWtlbs
5"
7-862-0501 453.30 Plain Back 3911-5C 3/64 to 1-1/8 12
Direct Mount
7-862-0511 759.60 D1-43944-5C
3/64 to 1-1/8 157-862-0512 760.20 D1-5
7-862-0515 705.06 1-1/2" x 83984-5C
7-862-0517 656.61 2-1/4" x 8
Chuck with Threaded Nose 2-3/16 x 10
7-862-0502 662.07 Plain Back 3974-5C 3/64 to 1-1/8 12
7-862-953 17.02 Shoulder Length Stop
TRU-LENGTH
7-862-0503 860.94 Plain Back 3975-5C 3/64 to 1-1/8 13
UniversalType 3911
TRU LengthType 3975
ThreadedType 3974-5C
Spare Parts• Sold by the piece
5C Collet Chucks for Mounting with Adapter Plates6000 RPM, 0.0004" T.I.R.
• High quality Forged Steel body• Designed for use with all 5C collets• For turning, facing, boring, grinding, and millingoperations on center lathes and grinding machines
• The simple key operated scroll provides a uniform,distortion free clamping of work pieces and lowcollet exchange times
• Their simple design, rugged construction, and fineworkmanship assures high quality and long service life
ChuckDia
PartNumber
RetailPrice Scroll Retail
Price Pinion RetailPrice Wrench Retail
PriceMounting
BoltsRetailPrice
5"
7-862-0501 453.30 7-887-105 102.66 7-886-105 26.14
7-889-005 32.52 7-862-952 3.81
7-862-0502 662.07 7-887-107 94.117-886-505 36.90
7-862-0503 860.94 7-887-108 94.11
7-862-0505 680.43 7-887-105 102.66 7-886-105 26.14
7-862-0511 759.60
7-887-107 94.11 7-886-505 36.907-862-0512 760.20
7-862-0515 705.06
7-862-0517 656.61
• Scroll is fully hardened and ground for longer life• Pinions are hardened and ground
Standard Accessories:
• 1 Chuck wrench• 1 Set of mounting bolts• 1 Hex keyAdapter plates for A, D, DIN, Threaded and NST50 spindles as wellas 5C adjustable collet stop for the 5C collet chuck are available
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 487
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Collet ChucksC
OLL
ETC
HU
CK
S
488 COLLET CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
* See page 385 formounting instructions
ChuckDia
PartNumber
RetailPrice
TaperSize
5"
7-877-055 193.08 A-5
7-877-056 172.59 A-6
7-877-058 175.80 A-8
7-878-053 175.26 D1-3
7-878-054 175.26 D1-4
7-878-055 175.26 D1-5
7-878-056 172.62 D1-6
7-878-058 200.61 D1-8
7-879-051 149.46 L00
7-921-052 146.46 C-2 / DIN-2
7-922-051 119.74 M39 x 4
7-922-053 117.31 2-3/16 - 10
Machined* Adapters for A, D, DIN, and Threaded Lathe Spindles
Semi-machined Adapters for Threaded Lathe Spindles
ChuckSize
PartNumber
RetailPrice
SpindleSize
5"
7-871-051 103.95 1 x 10
7-871-052 103.95 1-1/2 x 8
7-870-105 93.27 Rough
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 488
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
489
CO
LLETC
HU
CK
S
Collet Chucks
Quality Products • Partnership • Industry Experts COLLET CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
• Scroll is fully hardened and ground for longer life• Pinions are hardened and ground
Standard Accessories:
• 1 Chuck wrench• 1 Set of mounting bolts• 1 Hex key
5" mounting plates (adapters) A5, D3, D4, D5,Threaded and DIN are available
Fully Machined Steel Adapters for A, D, DIN and Threaded Lathe Spindles
ChuckDia
PartNumber
RetailPrice
5C ColletHolding Capacity
inchesRPM Wt
lbs
5" 7-862-0505 680.43 3/64 x 1-1/8 6000 12
ChuckDia
TaperSize
PartNumber
RetailPrice
5"
A-4 7-874-054 180.57
A-5 7-874-055 200.25
A-6 7-874-056 212.79
D1-3 7-875-053 254.37
D1-4 7-875-054 273.69
D1-5 7-875-055 298.53
D1-6 7-875-056 278.46
D1-8 7-875-058 335.49
L00 7-879-9051 203.37
1-1/2 x 8 7-876-052 152.04
2-3/16 x 10 7-876-054 151.38
2-1/4 x 8 7-876-056 152.04
Type 3960-5C
Super Precision 5C SET TRU Collet Chucks with Fine Adjustmentfor Mounting with Adapter Plates, 6000 RPM, 0.0004" T.I.R.
• High quality Forged Steel body• Designed for use with all 5C collets• Can be used for turning, facing, boring, grinding andmilling operations on center lathes and grinding machines
• The simple key operated scroll provides a uniform, distortionfree clamping of work pieces and low collet exchange times
• Four fine adjustment screws are used to set up thechuck on its mounting plate to get precision within0.0004" T.I.R. on duplicate parts
5C ColletsPart Number: 7-168-
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 489
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Collet ChucksC
OLL
ETC
HU
CK
S
490 COLLET CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
16C Plain Back and SET-TRU Collet Chucks• Steel Body• T.I.R. 0.0004"• 6000 RPM
TRU-LengthNo Workpiece Movement
* Note: All SET-TRUbackplates arefully finished
SET-TRU
ChuckDia
PartNumber
RetailPrice Mounting 16C Collet
Holding Capacity RPM Wtlbs
6"7-862-0601 1,057.20 Plain Back
1/16 - 1-5/8 600021.0
7-862-0605 1,369.02 SET-TRU 24.0
Type 3965
Adapters for A, D, C, L,and Threaded Lathe Spindles
ChuckDia Taper Size SET-TRU
Part Number*RetailPrice
Plain Back
FinishedPart Number
RetailPrice
Semi-finishedPart Number
RetailPrice
6-1/4"
A-5 7-874-065 215.19 – – 7-873-065 156.75
D1-3 7-875-063 312.00 7-878-063 202.92 7-878-0630 190.23
D1-4 7-875-064 312.00 7-878-064 207.36 7-878-0640 222.60
D1-5 7-875-065 312.00 7-878-065 207.36 7-878-0650 222.60
D1-6 7-875-066 320.67 7-878-066 207.36 – –
D1-8 7-875-068 373.38 – – – –
L00 7-879-9061 219.42 7-879-061 162.96 – –
L0 7-879-9062 231.57 7-879-062 162.96 – –
C-4 / DIN-4 – – 7-921-064 147.60 – –
C-5 / DIN-5 – – 7-921-065 145.56 7-921-0650 141.36
C-6 / DIN-6 7-920-066 228.58 – – – –
1-1/2" - 8 7-876-062 178.32 – – 7-871-062 115.11
2-3/16" - 10 (Hardinge) 7-876-064 175.80 7-922-063 129.15 – –
2-1/4" - 8 7-876-066 178.32 – – 7-871-063 115.11
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 490
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
491
CO
LLETC
HU
CK
SPAR
EPA
RTS
Collet Chuck Spare Parts
Quality Products • Partnership • Industry Experts COLLET CHUCKS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDia
ScrollPart Number
RetailPrice
PinionPart Number
RetailPrice
FineAdjustment
ScrewsPart Number
RetailPrice
WrenchPart Number
RetailPrice
MountingBolts
Part Number
RetailPrice
5" 7-887-105 102.66 7-886-105 26.14 7-897-6051 10.30 7-889-005 32.52 7-897-705 9.54
ChuckDia Mounting Pinion
Part NumberRetailPrice
ScrollPart Number
RetailPrice
FineAdjustment
ScrewsPart Number
RetailPrice
6" Plain Back7-886-506 40.50 7-887-106 187.42
– –
SET-TRU 7-897-6061 13.15
ChuckDia Mounting
ColletWrench
Part Number
RetailPrice
ChuckWrench
Part Number
RetailPrice
MountingBolts
Part Number
RetailPrice
6" Plain Back7-862-860 42.18 7-889-008 34.59
7-862-962 5.00
SET-TRU 7-862-963 10.98
Spare Parts for 5" Chuck• Sold by the piece
Spare Parts for 6" Chuck
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 491
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
MIN
ISC
RO
LLC
HU
CK
SA
ND
SPA
RE
PAR
TS
492 MINI SCROLL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Mini Scroll Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MT2 x 1/2"-20Drill Chuck Arbor
Part Number 7-052-613
ChuckDia
ChuckPart
Number
RetailPrice
Type ofMounting
M
Wtlbs
ClampingRanges
min-max
2-1/3"
7-810-0212 413.88 M12 X 1
.98 .02 - 2.36
7-810-0214 346.95 M14 X 1
7-810-0222 383.40 1/2 - 20
7-810-0225 391.26 3/4 - 16
7-810-0225S* 325.65 3/4 - 16*
ChuckDia
Hard SolidJaws
3 Pc SetPart Number
RetailPrice
Soft SolidJaws
3 Pc SetPart Number
RetailPrice
Scroll1 Pc
Part Number
RetailPrice
Wrench1 Pc
Part Number
RetailPrice
2-1/3" 7-893-002 96.09 7-882-214 152.99 7-887-002 71.73 7-889-002 26.40
Type 3286
Wrench
* Threaded mount for Sherline Lathes
3-Jaw Self-Centering Scroll Chucks• Steel body• Solid reversible jaws• Special compact design allows achievement of very small turned diameters
Standard Accessories:
• 1 Set of Hard Solid Reversible Jaws• 1 Chuck wrench
Optional Accessories:
• 1 Set of Soft Solid Jaws• Drill chuck arbor, MT2 x 1/2" - 20
Spare Parts
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 492
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
493
QU
ICK
CLA
MPIN
GC
HU
CK
S
Quality Products • Partnership • Industry Experts QUICK CLAMPING CHUCKS
Prices are subject to change without notice
Quick Clamping Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3-Jaw 2.17" (55mm) Quick Clamping Self-Centering Scroll Chucks• Low profile• Light weight• Steel body• 6000 RPM• Threaded mount• T.I.R. 0.0008" (0.02mm)• Tommy Bar,/Wrench 7-889-802
D = 0.787" thru 2.953" D = 0.200" thru 1.260"
Clamping Ranges
ChuckDia
PartNumber
RetailPrice M RPM
maxWtlbs
2.17"7-864-0212 347.25 M12x1
6000 1.227-864-0214 349.41 M14x1
Type 3266
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 493
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
QU
ICK
CLA
MPI
NG
CH
UC
KS
494 QUICK CLAMPING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Quick Clamping Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
3 and 6-Jaw Quick Clamping Self-Centering Scroll Chucksfor Drill and End Mill Sharpening and for Fixtures with 5C and MT Sockets100 RPM, T.I.R. 0.00059"
• BISON-BIAL 3 and 6-Jaw lever operated, super accurate, low profilechucks designed to solve tool grinding problems
• Keyless and pinionless gripping system allows for the reduction ofclamping and unclamping time
• 6-Jaw chucks provide uniform distortion free clamping of workpieces• Chucks can be mounted on the spindle nose of tool grinders,rotary tables, indexing fixtures, and measuring devices
• Special adapters for tool grinders as well asadapters with 5C and MT shanks are available
Standard Accessories for 3-Jaw Chucks:
• 1 Set of ID jaws• 1 Set of OD jaws• 1Wrench
Standard Accessories for 6-Jaw Chucks:
• 1 Set of jaws• 1Wrench
Optional Accessories:
• Soft Solid Jaws• Hard Master Jaws• 5C and MT Adapters
ChuckDia
HoleDia
3-Jaw 6-Jaw
PartNumber
RetailPrice
RPMmax
Wtlbs
PartNumber
RetailPrice
RPMmax
Wtlbs
3" .95 7-864-0300 654.842000
2.4 7-869-0300 818.671600
2.8
4" 1.26 7-864-0400 728.04 7.1 7-869-0400 903.93 6.2
5" 1.50 7-864-0500 864.90 1500 8.8 7-869-0500 1,113.001200
8.8
6-1/4" 2.05 – – – – 7-869-0600 1,363.80 15.4
Type 3266 Type 3866
Part Number: 7-910- Part Number: 7-913-
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 494
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
495
QU
ICK
CLA
MPIN
GC
HU
CK
S
Quality Products • Partnership • Industry Experts QUICK CLAMPING CHUCKS
Prices are subject to change without notice
Quick Clamping Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckDiaA
PartNumber A B C D E F G H J K L RPM
max
Operatinglever
length
Approxwt
3 7-864-0300 3.1496 1.3780 0.0591 1.8898 0.9449 1.5354 3xM6 2.0472 1.3780 0.5118 3.2283 2000 3.9370 0.5
4 7-864-0400 3.9370 1.5748 0.0787 2.9528 1.2598 2.4409 3xM8 3.3465 1.6535 0.6693 4.0157 2000 4.9213 1.5
5 7-864-0500 4.9213 1.8898 0.3150 2.7559 1.4961 2.2047 3xM6 3.2677 2.0079 0.7874 5.0787 1500 6.2992 1.8
Part Number Retail Price
7-864-0300 654.84
7-864-0400 728.04
7-864-0500 864.90
Part Number Retail Price
7-869-0300 818.67
7-869-0400 903.93
7-869-0500 1,113.00
7-869-0600 1,363.80
ChuckDiaA
PartNumber A B C D E F G H J K L s RPM
max
Operatinglever
length
Approxwt
3 7-869-0300 3.1496 1.3780 0.0591 1.8898 0.9449 1.5354 3xM6 2.0472 1.3780 0.8661 3.2283 1-23 1600 3.9370 0.9
4 7-869-0400 3.9370 1.5748 0.0787 2.9528 1.2598 2.4409 3xM8 3.3465 1.6535 0.9843 4.0157 1.5-31 1600 4.9213 1.3
5 7-869-0500 4.9213 1.8898 0.3150 2.7559 1.4961 2.2047 3xM6 3.2677 1.9685 1.4173 5.0394 2-37 1200 6.2992 1.8
6 7-869-0600 6.2992 2.0472 0.3150 3.0906 2.0472 2.5591 3xM6 3.7795 2.2835 1.4173 6.4567 3-51 1200 7.8740 3.2
3 and 6-Jaw Quick Clamping Self-CenteringScroll Chuck Dimensions
3-Jaw Chuck Dimensions
6-Jaw Chuck Dimensions
Type 3866
Type 3266Chuck Diameters:
3" and 4"Chuck Diameters:
5" and 6"
Chuck Diameters:3" and 4"
Chuck Diameters:5" and 6"
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 495
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
QUICKCLA
MPINGCHUCKSPAREPARTS
496 QUICK CLAMPING CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Quick Clamping Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Spare Parts
ChuckDia
Hard Solid Jaws Soft Solid Jaws
6-Jaw Set Retail Price 3-Jaw ID Set Retail Price 3-Jaw OD Set Retail Price 3-Jaw Set Retail Price
3" 7-892-603 181.71 7-881-503 120.66 7-880-503 120.66 7-882-503 79.01
4" 7-892-604 219.03 7-881-504 146.55 7-880-504 146.25 7-882-504 87.10
5" 7-892-605 294.57 7-881-505 129.24 7-880-505 129.24 7-882-505 98.14
6-1/4" 7-892-606 282.69 7-881-306 136.53 7-880-306 136.53 7-882-306 91.47
ChuckDia
Hard Master Jaws Scroll 1 Pc Wrench 1 Pc
6-Jaw Set Retail Price 3-Jaw Set Retail Price Part Number Retail Price Part Number Retail Price
3" – – – – 7-887-603 130.05 7-889-903 3.36
4" – – – – 7-887-604 149.50 7-889-904 3.36
5" – – – – 7-887-605 108.00 7-889-905 3.81
6-1/4" 7-885-606 317.88 7-885-306 154.47 7-887-606 173.38 7-889-906 4.61
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:07 AM Page 496
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
497
QU
ICK
CLA
MPIN
GC
HU
CK
AD
APTER
S
Quality Products • Partnership • Industry Experts QUICK CLAMPING CHUCKS
Prices are subject to change without notice
Quick Clamping Chucks
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MTNumber
ChuckDiaD
PartNumber
RetailPrice L H 3-Jaw
F6-Jaw
E
3-Jawd
min-max
6-Jawd
min-max
34" 7-913-403 146.46 5.51 1.57 .67 .98 .079 - 1.22 .059 - 1.22
5" 7-913-503 158.78 5.60 1.89 .79 1.42 .098 - 1.46 .079 - 1.46
44" 7-913-404 146.46 6.41 1.57 .67 .98 .079 - 1.22 .059 - 1.22
5" 7-913-504 164.22 6.50 1.89 .79 1.42 .098 - 1.46 .079 - 1.46
5 6" 7-913-605 178.56 7.68 2.05 1.30 1.42 .098 -2.00 .118 - 2.00
ChuckDiaD
PartNumber
RetailPrice L H Thru Hole
Diameter3-Jaw
F6-Jaw
E
3-Jawd
min-max
6-Jawd
min-max
3" and 4" 7-910-604 195.68 5.42 1.57
.866
.67 .98 .079 - 1.22 .059 - 1.22
5" 7-910-605 195.68 5.74 1.89 .79 1.42 .098 - 1.46 .079 - 1.46
6-1/4" 7-910-606 221.73 5.82 2.05 1.30 1.42 .098 - 2.00 .118 - 2.00
Type 8287
Type 8283
MT Adapters for Quick Clamping Chucks, Fully Machined
3" and 4" Diameters: 0.001" T.I.R.5" and 6" Diameters: 0.0006" T.I.R.
Adapters and SET-TRU chucks are sold separately
5C Adapters for Quick Clamping Chuck Fully Machined• 5C and MT Adapters are designed for use with BISON-BIAL 3 and6-Jaw Quick Clamping Lathe Chucks
• Made of high quality Forged Steel, hardened and precision ground formaximum accuracy
• Wide clamping range and high accuracy makes them very useful inmany precision drilling, turning, grinding, and milling operations
• BISON-BIAL Quick Clamping Chucks give accuracy not available withstandard and precision 5C collets
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 497
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LIV
EA
ND
DEA
DC
ENTE
RS
498 LIVE AND DEAD CENTERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MorseTaper Size
BodyOnly
HeadOnly* T.I.R.
A B D L Max Wt ofWorkpiece RPM
max
Wtwith head
Part Number Retail Price Part Number Retail Price inches lbs lbs
380/1
7-573-033 176.137-573-0301 137.53
.0023.74 5.90
3.07 7.09 1543 400013.5
80/2 7-573-0302 218.07 5.70 7.87 22.5
4
100/1
7-573-044 206.24
7-573-0401 139.36
.002
3.74 5.90
3.86 8.11 2205 3500
16.5
100/2 7-573-0402 221.85 5.70 7.87 25.4
100/3 7-573-0403 412.03 7.68 9.84 32.6
5
125/2
7-573-055 391.44
7-573-0502 226.17
.002
5.70 7.87
4.84 9.52 3307 3200
32.0
125/3 7-573-0503 415.56 7.68 9.84 41.0
125/4 7-573-0504 458.69 9.65 11.81 53.0
MorseTaper
Mounting Bolts Chuck
Part Number Retail Price Part Number Retail Price
3 7-573-106 1.76 – –
4
7-573-108 1.76
7-811-0400 336.09
5 7-812-0500 502.17
Rotating BodyType 9157
Rotating Chuckssee pages 481-482
Front MountingChucks
see pages 413-414
Mounting Bolts3" M6 x 1.0 -1.4"
4" and 5" M8 x 1.25 - 1.6"
Tapered HeadType 8883
Draw Bar Threads:MT3 3/8" - 16MT4 1/2" - 13MT5 5/8" - 11
Type 8882
Universal Pipe Live Centers• Interchangeable heads• Triple bearing design• Designed for using with interchangeable tapered heads orwith 3", 4", and 5" front mounting, self-centering chucks
• All parts are made of Steel, hardened and precision ground• All interchangeable parts can be easily replaced• Bodies, heads, and chucks are sold separately• Rotating bodies come with mounting bolts
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 498
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
499
LIVE
AN
DD
EAD
CEN
TERS
Quality Products • Partnership • Industry Experts LIVE AND DEAD CENTERS
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MorseTaper
PartNumber
RetailPrice T.I.R.
D A B C L Max Wt ofWorkpiece lbs
RPMmax
Wtlbsinches
1 7-575-010 98.20
.0003
1.97 .79 1.561.38
3.66 2205000
.77
2 7-575-020 115.55 2.36
1.18
1.60 4.11 400 1.32
2 7-575-021 177.993.15 2.32 2.09
4.84 6604500
2.76
3 7-575-030 180.79 5.51 770 2.98
3 7-575-031 254.633.93 1.57
2.642.40
5.83 1210
3000
5.07
4 7-575-040 244.38 2.70 6.73 1320 5.62
4 7-575-042 281.32 .0004 5.51 2.763.05 2.76
7.09 1540 11.00
5 7-575-051 351.97 .0008 6.69 3.94 8.15 1653 2000 17.60
6 7-575-060 1,382.40 .002 11.50 7.09 4.57 4.21 11.73 4400 1000 75
MorseTaper
PartNumber
RetailPrice
Max Wt ofWorkpiece lbs
RPMmax T.I.R. A B C D L Wt
lbs
4 7-566-004 258.85 2200 7000 .0002 1.10 4.58 1.91 2.76 8.62 5.50
5 7-566-005 427.09 4400 6000 .0002 1.57 5.87 2.64 3.47 11.00 11.00
Type 8825
Type 8814NC
NC Quad-Bearing Live Centers• Heavy duty• High speed• 7000 to 6000 RPM
Bull Head Live Centers• Triple bearing design• Three matched bearings are preloaded at the factory• Good thrust and radial capabilities• Bearings are protected by a special seal• Head is made of high quality Alloy Steel and heat treated to RC 61-63• 60 degree head angle• Centers are designed to hold pipe and hollow work
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 499
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LIV
EA
ND
DEA
DC
ENTE
RS
500 LIVE AND DEAD CENTERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Super Precision and Precision Live Centers• Machined from one piece of forging, hardened and precisely ground• Three precision high-quality bearings are protectedby a special Steel shield and neoprene seal
MorseTaper
Precision Live Centers Super Precision Live Centers Max Wt ofWorkpiece lbs
D A L C B RPMmax
WtlbsPart Number T.I.R. Part Number T.I.R. inches
1 7-565-001
.0003
7-565-101 .0002 220 1.50 .59 4.07 .70 1.975000
.64
2 7-565-002 7-565-102
.0001
460 1.57 .70 4.74 .87 2.22 1.00
3 7-565-003 7-565-103 925 2.20 .98 6.14 1.12 2.95 4000 2.13
4 7-565-004 7-565-104 1850 2.52 1.10 7.24 1.24 3.21 3000 3.85
5 7-565-005.0004
7-565-105.0002
4400 3.35 1.61 9.33 1.77 4.23 2500 8.37
6 7-565-006 7-565-106 7700 5.12 2.48 13.13 2.52 5.96 2000 26.43
Precision Live Centers Super Precision Live Centers
Part Number Retail Price Part Number Retail Price
7-565-001 105.71 7-565-101 116.27
7-565-002 113.40 7-565-102 124.20
7-565-003 136.32 7-565-103 149.99
7-565-004 159.84 7-565-104 203.04
7-565-005 260.76 7-565-105 286.86
7-565-006 512.31 7-565-106 516.88
Morse Taper PartNumber
RetailPrice
Max Wt ofWorkpiece lbs
Thrust lbs at1000 RPM L B C D A RPM
maxWtlbs
2 7-567-002 183.05 220 90 5.41 2.87 1.02 1.73 0.91 8000 1.33
3 7-567-003 200.04 440 170 6.53 3.37 1.26 1.89 1.10 6000 1.95
4 7-567-004 258.71 880 350 7.89 3.88 1.69 2.36 1.53 4500 3.62
5 7-567-005 317.19 1430 550 9.80 4.70 2.01 2.76 1.77 4000 7.17
6 7-567-006 510.13 3080 1200 12.64 5.47 2.44 3.70 2.40 3000 17.20
Type 8823
Type 8811
• Adjustable, ultra precision radial bearing reducesrun out to minimum after much use
• Easy to adjust
• Live centers are lubricated with a special greaseand do not require any additional lubrication
Ultra Precision Adjustable Live Centers Heavy Duty, Triple Bearing• ± 0.00006" T.I.R• Machined from one piece of forging, hardened and precisely ground• Three precision, high-quality bearings are protected bya special Steel shield and neoprene seal
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 500
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
501
LIVE
AN
DD
EAD
CEN
TERS
Quality Products • Partnership • Industry Experts LIVE AND DEAD CENTERS
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
HD Ultra and Super Precision Live Centers• Machined from one piece of forging, hardenedand precisely ground
• Centers are provided with three selectedheavy-duty ultra precision bearings
• Bearings are protected against dust and coolant
MorseTaper
Super Precision Live Centers Ultra Precision Live Centers Max Wt ofWorkpiece lbs
A B D G K RPMmax
WtlbsPart Number T.I.R. Part Number T.I.R. inches
1 7-568-001
0.0002
– – 220 2.382 1.417 0.591 0.4750 0.6707000
0.88
2 7-568-002 7-568-102
0.00012
441 2.539 1.772 0.787 0.7000 0.925 1.10
3 7-568-003 7-568-103 1102 3.110 2.362 0.984 0.9380 1.201 5000 2.87
4 7-568-004 7-568-104 1764 3.996 2.756 1.260 1.2310 1.575 3800 5.07
5 7-568-005 7-568-105 4409 5.039 3.543 1.575 1.7480 1.929 3000 10.36
Super Precision Live Centers Ultra Precision Live Centers
Part Number Retail Price Part Number Retail Price
7-568-001 161.55 – –
7-568-002 193.08 7-568-102 224.65
7-568-003 247.85 7-568-103 284.96
7-568-004 390.95 7-568-104 441.34
7-568-005 498.95 7-568-105 572.95
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 501
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LIV
EA
ND
DEA
DC
ENTE
RS
502 LIVE AND DEAD CENTERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Live Centers with Interchangeable Inserts• Body of live centers and inserts are made of forgings,hardened and precisely ground
• Sets are provided with the main body and seven differentstyle inserts in a wooden case
• Precision high quality bearings• Special sealing ring protects the bearings from coolant and dust• Inserts are easily interchangeable
Morse Taper 2 3 4 5 6
Set Part Number 7-570-002 7-570-003 7-570-004 7-570-005 7-570-006
Body Only Part Number 7-570-102 7-570-103 7-570-104 7-570-105 7-570-106
Approx Wt w/o Insert lbs 0.98 2.02 3.71 8.00 25.40
RPM max 5000 4000 3000 2500 2000
T.I.R. 0.0008 0.0008 0.0008 0.0012 0.0012
Max Wt of Workpiece lbs 220 440 880 1770 3550
L 4.055 5.217 6.220 7.815 10.846
L1 1.54 2.03 2.19 2.72 3.70
L2 0.177 0.197 0.217 0.256 0.256
D 1.57 2.20 2.52 3.35 5.12
d2 0.71 0.98 1.10 1.61 2.48
d3 0.28 0.47 0.59 0.87 1.89
Interchangeable Inserts ONLY
Type 8848, Part Number 7-570-202 7-570-203 7-570-204 7-570-205 7-570-206
L3 0.75 0.98 1.18 1.46 1.73
d3 0.28 0.47 0.79 0.87 1.89
d4 0.59 0.79 0.98 1.26 1.42
Type 8849, Part Number 7-570-302 7-570-303 7-570-304 7-570-305 7-570-306
L4 0.51 0.79 0.91 1.10 1.34
d5 0.87 1.42 1.77 2.20 2.76
d6 0.12 0.24 0.39 0.55 0.70 Interchangeable Inserts
Live Center Body
Type8848
Type8852
Type8855
Type8851
Type8849
Type8854
Type8853
Type8850
Type 8832
Extractor
Set
Part Number Retail Price
7-570-002 372.36
7-570-003 428.99
7-570-004 567.72
7-570-005 747.96
7-570-006 1,213.34
Interchangeable Inserts ONLY
Type 8848Part Number
RetailPrice
7-570-202 17.66
7-570-203 21.02
7-570-204 24.93
7-570-205 32.75
7-570-206 40.22
Interchangeable Inserts ONLY
Type 8849Part Number
RetailPrice
7-570-302 19.48
7-570-303 35.31
7-570-304 40.56
7-570-305 42.01
7-570-306 66.30
Body Only
Part Number Retail Price
7-570-102 169.52
7-570-103 192.24
7-570-104 223.52
7-570-105 291.71
7-570-106 546.34
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/21/11 11:59 PM Page 502
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
503
LIVE
AN
DD
EAD
CEN
TERS
Quality Products • Partnership • Industry Experts LIVE AND DEAD CENTERS
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Interchangeable Inserts (continued)
Interchangeable Inserts
Type8848
Type8852
Type8855
Type8851
Type8849
Type8854
Type8853
Type8850
Type 8832
Extractor
Morse Taper 2 3 4 5 6
Interchangeable Inserts ONLY
Type 8850, Part Number 7-570-402 7-570-403 7-570-404 7-570-405 7-570-406
L4 0.51 0.79 0.91 1.10 1.34
d7 1.50 2.48 2.76 3.15 3.94
d8 0.71 1.30 1.38 1.50 1.97
Type 8851, Part Number 7-570-502 7-570-503 7-570-504 7-570-505 7-570-506
L4 0.51 0.79 0.91 1.10 1.34
d9 0.87 1.42 1.77 2.20 2.76
d10 0.71 1.10 1.46 1.73 2.28
d11 0.31 0.47 0.67 0.79 0.94
Type 8852, Part Number 7-570-602 7-570-603 7-570-604 – 7-570-606
L4 0.51 0.79 0.91 – 1.34
d12 1.18 1.77 2.48 – 3.94
d13 0.98 1.50 2.09 – 3.46
d14 0.59 0.87 1.18 – 2.13
Type 8853 Part Number 7-570-702 7-570-703 – 7-570-705 7-570-706
L4 0.51 0.79 – 1.10 1.34
d16 0.049 0.049 – 0.098 0.157
d4 0.59 0.79 – 1.26 1.42
Type 8854, Part Number 7-570-802 7-570-803 7-570-804 7-570-805 7-570-806
L4 0.51 0.79 0.91 1.10 1.34
d15 0.71 0.98 1.26 1.77 2.20
Type 8855, Part Number 7-570-902 7-570-903 7-570-904 7-570-905 7-570-906
L5 2.36 3.15 3.94 4.72 6.30
B 0.79 1.18 1.57 1.97 2.36
Interchangeable Inserts ONLY
Type 8850Part Number
RetailPrice
7-570-402 30.01
7-570-403 55.49
7-570-404 63.07
7-570-405 68.33
7-570-406 108.50
Interchangeable Inserts ONLY
Type 8851Part Number
RetailPrice
7-570-502 30.64
7-570-503 42.09
7-570-504 50.81
7-570-505 53.40
7-570-506 74.80
Interchangeable Inserts ONLY
Type 8852Part Number
RetailPrice
7-570-602 38.15
7-570-603 49.05
7-570-604 71.34
7-570-605 66.73
7-570-606 127.00
Interchangeable Inserts ONLY
Type 8853Part Number
RetailPrice
7-570-702 15.79
7-570-703 19.56
7-570-704 24.93
7-570-705 26.10
7-570-706 33.50
Interchangeable Inserts ONLY
Type 8854Part Number
RetailPrice
7-570-802 29.81
7-570-803 35.16
7-570-804 32.90
7-570-805 42.01
7-570-806 57.80
Interchangeable Inserts ONLY
Type 8855Part Number
RetailPrice
7-570-902 17.10
7-570-903 17.83
7-570-904 21.08
7-570-905 30.22
7-570-906 38.46
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:00 AM Page 503
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LIV
EA
ND
DEA
DC
ENTE
RS
504 LIVE AND DEAD CENTERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MorseTaper
PartNumber
RetailPrice
HeadDiaD
ClampingRange
D1
Max Wt ofWorkpiece
lbs
Max ArialLoadlbs
A B L Wtlbs
47-590-041 576.17 2.68 1.18 - 1.97 121 2204 2.52 3.15 7.28 4.41
7-590-043 576.17 3.19 1.65 - 3.94 143 2645 2.64 3.31 7.36 5.95
5
7-590-051 628.58 2.68 1.18 - 1.97 121 2204 2.52 3.15 8.35 6.61
7-590-053 750.88 3.19 1.65 - 3.94 141 2645 2.64 3.81 8.35 7.50
7-590-054 903.67 3.54 2.05 - 4.72 220 4409 3.39 4.45 9.94 11.46
Type 8410
Face drivers are providedwith RH pins
•RHLH
Automatic Face Drivers for RH and LH Operations• Ideal holding device for a modern, high production lathe• Specially suited to repetition work• Slim design• All wearable parts hardened and ground• No service required• Spring loaded center• Carrier teeth based on hydro-plastic mediumadjust automatically to work piece
• Save set up time - One setting for machining all work pieces
• Heavier cuts without slippage• Higher concentricity and accuracy• Most effective driving action even with irregular faces• All drive plate components are hardened and ground for long life• Complete OD machining in ONE clamping• Accurate end location• Load and unload automatically• Eliminate preliminary machining of end faces•Wide range clamping capability
MorseTaper
Drive PinRight
Part Number
RetailPrice
Drive PinLeft
Part Number
RetailPrice
CenterPart Number
RetailPrice
SpringPart Number
RetailPrice
47-590-941R 63.60 7-590-941L 63.60 7-590-841 31.26
7-590-2037 8.457-590-943R 63.60 7-590-943L 63.60 7-590-843 31.26
5
7-590-941R 63.60 7-590-941L 63.60 7-590-841 31.267-590-2037 8.45
7-590-943R 63.60 7-590-943L 63.60 7-590-843 31.26
7-590-954R 79.93 7-590-954L 79.93 7-590-855 30.74 7-590-2044 12.56
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:00 AM Page 504
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
505
LIVE
AN
DD
EAD
CEN
TERS
Quality Products • Partnership • Industry Experts LIVE AND DEAD CENTERS
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
MorseTaper
PartNumber
RetailPrice
ClampingRange d L Qty
per SetLeft = L
Right = R
4 and 57-590-941L 63.60
1.18 - 1.97 .47 1.02 3L
7-590-941R 63.60 R
4 and 57-590-943L 63.60
1.65 - 3.94 .47 1.10 3L
7-590-943R 63.60 R
57-590-954L 79.93
2.05 - 4.72 .71 1.89 3L
7-590-954R 79.93 R
Drive Pins and Centers for Automatic Face Drivers
MorseTaper
PartNumber
RetailPrice
ClampingRange d L
4 and 57-590-841 31.26 1.18 - 1.97 .47 3.03
7-590-843 31.26 1.65 - 3.94 .55 3.23
57-590-855 30.74 2.05 - 4.72 .79 4.72
7-590-855 30.74 2.56 - 5.91 .79 4.72
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:00 AM Page 505
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
LIV
EA
ND
DEA
DC
ENTE
RS
506 LIVE AND DEAD CENTERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without notice
Live and Dead Centers
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Full Dead Centers and Half Dead Centers, ± 0.0001" T.I.R.• Designed for use wherever high accuracy are required• Case hardened to 61-63 HRC• Carbide tipped centers give longer tool life and require less re-grinding
MorseTaper
Half CarbonSteel
Type 8730Part Number
RetailPrice
Half CarbideTipped
Type 8731Part Number
RetailPrice L D E Wt
lbs
1 – – 7-541-001 33.54 3.15 .48.28
.13
2 7-540-002 19.80 7-541-002 30.01 3.94 .71 .44
3 7-540-003 25.79 7-541-003 55.11 4.92 .95 .43 .66
4 7-540-004 39.87 7-541-004 64.35 6.30 1.24 .55 1.5
5 – – 7-541-005 100.42 7.87 1.76.71
4.0
6 – – 7-541-006 149.27 10.63 2.51 11.5
MorseTaper
Carbide TippedType 8711
Part Number
RetailPrice
Ball BearingSteel
Type 8712Part Number
RetailPrice L D E Wt
lbs
1 7-550-005 23.95 7-555-005 13.81 3.15 .48.28
.13
2 7-550-010 22.92 7-555-010 16.37 3.94 .71 .44
3 7-550-015 44.69 7-555-015 21.77 4.92 .95 .43 .66
4 7-550-020 64.00 7-555-020 33.92 6.30 1.24 .55 1.5
5 7-550-025 85.85 7-555-025 61.55 7.87 1.76.71
4.0
6 7-550-030 131.33 7-555-030 149.57 10.63 2.51 11.5
Type 8711
Type 8712
Type 8711
Type 8712
Type 8730
Type 8731
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:00 AM Page 506
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
507
VISES
Quality Products • Partnership • Industry Experts VISES
Prices are subject to change without notice
Vises
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Modular Precision Vises for CNC Machines• All surfaces are hardened and precision ground square and parallelto an accuracy of ±0.0006" jaws and ±0.0004" base
• Forged Steel body• Low profile pull-down jaws• Design eliminates clamping deflection• Jaws can be opened very wide and provides strong clamping power• V-Groove jaw inserts are available• Ideal for all types of milling, grinding, drilling,and tapping operations on vertical andhorizontal CNC machines
• Vises have a modular design and can becombined with other modules
Swivel BaseType 6586
Handle
JawWidth
S
VisePart Number
HandlePart Number
ClampPart Number A B C H L a
max h k(H7)
MaxClampingForce lbf
Wtlbs
4" 7-223-0407-223-905
7-223-940 3.35 1.38 .51 2.76 12.60 6.30 1.38 .4724 4410 24
5" 7-223-050 7-223-950 4.13 1.65 .59 3.35 13.20 6.30 1.69 .4724 6614 36
6"7-223-060
7-223-908
7-223-960 5.51 2.05 .71 4.2916.70 7.87
2.24 .7874 904073
7-223-062 18.70 9.84 78
8"
7-223-080
7-223-980 6.50 2.40 .79 4.96
21.20 10.24
2.56 .7874 9920
129
7-223-082 23.00 12.20 134
7-223-085 25.00 14.17 140
VisePart Number
RetailPrice
HandlePart Number
RetailPrice
ClampPart Number
RetailPrice
7-223-040 1,485.307-223-905 39.69
– –
7-223-050 1,813.95 – –
7-223-060 2,093.58
7-223-908 51.27
7-223-960 19.047-223-062 2,224.92
7-223-080 2,830.47
7-223-980 24.707-223-082 2,976.30
7-223-085 3,202.41
Optional Accessories:Examples of Application:
ViseSize
BasePart Number
RetailPrice
4" 7-223-540 960.96
5" 7-223-550 1,019.25
6" 7-223-560 1,085.91
8" 7-223-580 1,471.02
Type 6566
Standard Accessories:
• 1 Handle• 1 Clamp
BISON_Indexers-Vise_472-507.qxd:Layout 1 4/22/11 12:00 AM Page 507
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
508 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIAL® products are exclusively distributed by Toolmex Corporation
Caterpillar V-Flange Tooling Flange Sizes perANSI B5.50-1994• Produced according to AT3 specifications• Made of Alloy Forged Steel for a long, durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
Taper7:24 D D2
H8 D3 D4± .002"
D5± .002"
D6"-.004"
D7-.02" D8 L1 L2 L3 L4
minL5
± .01" L6 L7 L8min L9
40
English Sizes (inches)
1.75 .6409 .7205 1.750 2.8457 2.5020 2.2287 .669 2.6929 .217 1.2598 1.6614 .6449 .9843 .8898 1.3858 .0394
Metric Sizes (mm)
44.45 16.28 18.3 44.45 72.28 63.55 56.61 17 68.4 5.5 32 42.2 16.38 25 22.6 35.2 1
50
English Sizes (inches)
2.75 1.0307 1.122 2.750 4.2209 3.8772 3.5925 1.063 4.0060 .276 1.8504 2.4213 1.0197 1.4843 1.3898 1.3858 .0394
Metric Sizes (mm)
69.85 26.18 28.5 69.85 107.21 98.48 91.25 27 101.75 7 47 61.5 25.9 37.7 35.3 35.2 1
Flange Sizes per ANSI B5.50-1994
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 508
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
509
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks• Through the spindle coolant capability• Wrenches sold separately
TaperSize
Balanced7000 RPM
Part Number
RetailPrice
Balanced15000 RPM
G 6.3Part Number
RetailPrice
Balanced20000 RPM
G 2.5Part Number
RetailPrice
ColletType
ClampingRange D H
40
– – 7-188-003 150.96 – –ER 11 1/32-1/4 .73
2.5
– – 7-188-006 158.33 – – 4
7-188-415 154.87 7-188-009 169.65 7-188-109 134.59
ER 16 1/8-7/16 1.10
2.5
7-188-417 154.87 7-188-012 169.65 – – 3
7-188-418 163.24 7-188-015 174.56 7-188-115 144.94 4
7-188-420 156.66 7-188-018 174.73 – –ER 20 1/8-1/2 1.38
2.5
7-188-422 159.44 7-188-021 174.73 – – 4
7-188-424 159.44 7-188-024 174.73 – –ER 25 1/8-5/8 1.65
2.5
7-188-426 164.01 7-188-027 179.72 – – 4
– – – – 7-188-130 168.99
ER 32 1/8-3/4
1.42* 1.14
7-188-430 167.92 7-188-030 179.72 – –
1.97
2.5
7-188-431 167.92 7-188-033 179.72 7-188-133 143.93 3
7-188-432 164.01 7-188-036 179.72 – – 4
– – 7-188-039 191.76 – – 5
7-188-443 161.72 7-188-041 177.23 – –
ER 40 1/8-1 2.4
2.5
7-188-440 164.01 7-188-044 179.72 7-188-144 139.00 4
– – 7-188-047 192.53 – – 5
7-188-446 142.06 – – – – 6
50
7-188-510 135.00 – – – – ER 16 1/8-7/16 1 .30 6
7-188-520 163.93 – – – – ER 20 1/8-1/2 1 .38 4
7-188-525 173.66 – – – – ER 25 1/8-5/8 1 .65 6
7-188-532 182.66 – – – – ER 32 1/8-3/4 1 .97 6
7-188-543 197.04 – – – –ER 40 1/8-1 2.4
2.5
7-188-545 224.27 – – – – 4
Type 7607
StubbyPart Number:7-188-130
StandardProjection
* Stubby, see picture above
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 509
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
510 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks Nut and Wrench
TaperSize
Balanced7000 RPM
Part Number
Balanced15000 RPM
G 6.3Part Number
Balanced20000 RPM
G 2.5Part Number
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
40
– 7-188-003 –7-188-811 24.27 7-188-911 15.43
– 7-188-006 –
7-188-415 7-188-009 7-188-109
7-178-816 26.25 7-178-916 27.787-188-417 7-188-012 –
7-188-418 7-188-015 7-188-115
7-188-420 7-188-018 –7-188-820 28.41 7-188-916 17.38
7-188-422 7-188-021 –
7-188-424 7-188-024 –7-188-825 31.63 7-188-925 19.70
7-188-426 7-188-027 –
– – 7-188-130 7-188-832H 27.20 – –
7-188-430 7-188-030 –
7-188-832 34.38 7-188-932 22.547-188-431 7-188-033 7-188-133
7-188-432 7-188-036 –
– 7-188-039 –
7-188-443 7-188-041 7-188-141Q
7-188-840 41.68 7-180-930 29.077-188-440 7-188-044 7-188-144
– 7-188-047 –
7-188-446 – –
50
7-188-510 – – 7-178-816 26.25 7-178-916 27.787-188-520 – – 7-188-820 28.41 – –
7-188-525 – – 7-188-825 31.63 7-188-925 19.70
7-188-532 – – 7-188-832 34.38 7-188-932 22.54
7-188-543 – –7-188-840 41.68 7-180-930 29.07
7-188-545 – –
ER 20 thru 40Nut and Wrench
ER 11 and 16Nut and Wrench
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 510
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
511
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 7614
NutPart
Number
RetailPrice
WrenchPart
Number
RetailPrice
7-180-901 57.64 7-188-932 22.54
7-180-9100 67.36 7-180-930 29.07
7-180-901 57.64 7-188-932 22.54
7-180-9100 67.36 7-180-930 29.07
7-180-9150 77.06 7-180-935 29.56
TaperSize
Balanced7000 RPM
PartNumber
RetailPrice
Balanced15000RPMG 6.3Part
Number
RetailPrice
Balanced20000RPMG 2.5Part
Number
RetailPrice
ColletType
ClampingRange d L1
40
7-180-401 166.02 – – – – TG75 1/8-3/4 2-1/8 3
7-180-403 165.36 7-180-010 181.11 7-180-110 191.53
TG100 3/32-1 2-1/2
3
7-180-404 166.82 7-180-015 195.64 – – 4
7-180-406 207.52 – – – – 6
50
7-180-501 125.86 – – – – TG75 1/8-3/4 2-1/8 3
7-180-503 183.66 – – 7-180-103 206.72
TG100 3/32-1 2-1/2
3-1/8
7-180-504 183.66 – – 7-180-104 209.36 3-1/2
7-180-505 213.41 – – – – 5-1/2
7-180-507 261.59 – – – – 7-1/2
7-180-513 261.59 – – – –
TG150 1/2-1-1/2 3-1/2
3
7-180-514 295.93 – – – – 3-1/2
7-180-517 284.05 – – – – 5-1/2
TG Collet Chucks• Collet chuck• Collets• Through the spindle coolant capability• Draw Bar Threads: CAT 40 5/8"-11
and CAT 50 1"- 8• Collet seat taper T.I.R. < .0002"• Wrenches sold separately• Retention knobs sold separately
Double Angle Collet Chucks• Through the spindle coolant capability• Collet seat taper T.I.R. < .0002"• Retention knobs sold separately• Wrenches sold separately• Draw Bar Threads:
CAT 40 5/8"-11 and CAT 50 1"- 8
TaperSize
ColletType
Balanced7000 RPM
PartNumber
RetailPrice
Balanced15000 RPM
G 6.3Part Number
RetailPrice
ClampingRange
L D
inches
40
DA 100 7-193-250 201.56 – – 1/8-25/64 3.50 1.09
DA 200 7-193-150 201.56 – – 1/8-9/16 3.00 107
DA 1807-193-415 184.64 7-193-015 202.67
1/8-3/42.75
1.547-193-424 189.66 7-193-024 202.95 4.00
50 DA 180
7-193-524 226.80 – –
1/8-3/4
4.00
1.547-193-526 234.55 – – 6.00
7-193-528 250.65 – – 8.00
Nut RetailPrice Wrench Retail
Price
Part Number7-193-810 35.68 7-193-910 19.80
7-193-805 25.20 7-193-905 16.75
7-193-818 33.81 7-193-918 17.38
Type 7652
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 511
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
512 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
D Balanced7000 RPMHolder
Part Number
RetailPrice
Balanced15000 RPM
G 6.3Part Number
RetailPrice
Balanced20000 RPM
G 2.5Part Number
RetailPriceRetail
PriceL1 L2 L3 D1
inches
1/8– – 7-185-002 105.65 – – 1-3/8 – 13/32
.757-185-405 96.99 7-185-004 120.09 – – 2-1/2 – 9/16
3/16
– – 7-185-006 115.69 – – 1-3/8 – 13/32
.757-185-407 98.27 7-185-008 115.30 7-185-208 79.27 2-1/2 –9/16
7-185-4074 104.72 – – – – 4 –
1/4
– – 7-185-012 112.29 – – 1-3/8 _ 13/32
.81257-185-409 95.44 7-185-014 98.20 – – 2-1/2 –25/32
7-185-4094 107.28 – – – – 4 –
5/16
– – 7-185-018 102.54 – – 1-3/8 – 13/32
.8757-185-4115 87.20 7-185-020 98.61 – – 2-1/2 _25/32
7-185-4117 107.28 – – – – 4 –
3/8
– – 7-185-024 105.65 – – 1-3/8 – 13/32
17-185-412 89.73 7-185-026 106.54 – – 2-1/2 –25/32
7-185-4122 99.27 – – – – 5 _
7/167-185-4123 87.20 7-185-030 98.61 – – 2-1/2 –
7/8 1.257-185-4127 95.44 – – – – 4 –
1/2
– – 7-185-034 103.64 – – 1-3/4 – 21/32
1.3757-185-413 89.73 7-185-036 95.99 7-185-236 80.76 2-5/8 _7/8
7-185-417 99.27 – – – – 5 –
5/8
– – 7-185-040 102.22 – – 1-3/4 – 19/32
1.757-185-431 94.39 7-185-042 111.94 – – 3-3/4 –15/16
7-185-437 100.18 – – – – 5-1/2 _
3/4
– – 7-185-048 102.22 – – 1-3/4 – 19/32
1.757-185-441 94.39 7-185-050 102.22 7-185-250 83.35 3-3/4 –1
7-185-447 100.18 – – – – 5-1/2 –
7/8
– – 7-185-054 106.93 – – 1-3/4 – 19/32
2.057-185-450 98.66 7-185-056 133.07 – – 3-1/27/8
25/32
7-185-451 101.14 – – – – 4 1-1/16
1
– – 7-185-060 110.25 – – 2
1 1-1/8 2.3757-185-461 104.89 7-185-062 138.47 7-185-262 85.22 4
7-185-465 114.03 – – – – 6
1-1/4
7-185-471 106.24 7-185-068 113.92 – – 4-1/4
1 1-1/8 2.757-185-472 111.28 – – – – 4-3/8
7-185-475 121.33 – – – – 6
1-1/27-185-481 137.67 – – – – 4-5/8
1 1-1/8 3.147-185-485 157.15 – – – – 6
End Mill Holders CAT 40• Through the spindle coolant capability• End mill socket T.I.R. < .0002"• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11
Type 7636
Set Screw
PartNumber
RetailPrice Thread
7-195-081 1.008-32
x 5/16
7-195-091 1.0010-32x 5/16
7-195-110 1.001/4-28x 1/4
7-195-120 1.005/16-24
x 1/4
7-195-210 2.753/8-24 x25/64
7-195-210 2.753/8-24 x25/64
7-195-312 3.757/16-20 x
15/32
7-195-415 4.409/16-18 x
35/64
7-195-513 5.005/8-18x 1/2
7-195-517 5.005/8-18 x19/32
7-195-618 5.403/4-16 x45/64
7-195-618 5.403/4-16 x45/64
7-195-621 6.803/4-16 x25/32
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 512
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
513
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Set Screw
Part Number Retail Price Thread
7-195-110 1.00 1/4-28x1/4
7-195-120 1.00 5/16-24x1/4
7-195-210 2.75 3/8-24x25/64
7-195-210 2.75 3/8-24x25/64
7-195-312 3.75 7/16-20x15/32
7-195-415 4.40 9/16-18x35/64
7-195-513 5.00 5/8-18x1/2
7-195-508 5.00 5/8-18x15/64
7-195-517 5.00 5/8-18x19/32
7-195-618 5.40 3/4-16x45/64
7-195-610 5.40 3/4-16x23/64
7-195-618 5.40 3/4-16x45/64
7-195-610 5.40 3/4-16x23/64
7-195-621 6.80 3/4-16x25/32
7-195-824 14.00 1-14x15/16
7-195-824 14.00 1-14x7/8
End Mill Holders CAT 50• Through the spindle coolant capability• End mill socket T.I.R. < .0002"
Type 7636
See diagram onprevious page• Retention knobs sold separately
• Draw Bar Threads: CAT 50 1"- 8
D HolderPart Number
RetailPrice
Balanced15000 RPM
G 6.3Part Number
RetailPrice L1 L2 L3 D1
inches
1/4– – 7-185-102 144.76 1-3/8 13/32
13/167-185-509 139.33 – – 2-1/2 –25/32
7-185-5101 154.39 – – 4 –
5/16 – – 7-185-108 148.91 2-1/2 – 25/32 7/8
3/8
– – 7-185-110 143.76 1-3/8 – 3/8
17-185-511 125.79 – – 2-1/2 –
25/327-185-512 141.99 – – 4-1/2 –7-185-513 160.82 – – 6-1/2 –7-185-514 241.93 – – 8 –
7/167-185-516 137.35 7-185-120 147.87 2-1/2 –
7/8 1-1/47-185-517 141.75 – 4-1/2 –
1/2
– – 7-185-124 182.14 1-3/4 – 25/32
1-3/87-185-521 125.79 – – 2-5/8 –
7/87-185-522 151.31 – – 4-5/8 –7-185-523 160.71 – – 6-5/8 –7-185-526 233.06 – – 8 –
5/8
– – 7-185-134 182.14 1-3/4 – 19/32
1-3/47-185-531 137.29 – – 3-3/4 –
15/167-185-532 154.70 – – 5-3/4 –7-185-533 163.87 – – 7-3/4 –
3/4
– – 7-185-142 182.14 1-3/4 – 19/32
1-3/47-185-541 137.76 – – 3-3/4 –
17-185-542 155.14 – – 5-3/4 –7-185-543 164.29 – – 7-3/4 –7-185-547 288.00 – – 12 – 1-3/8
7/8
– – 7-185-152 182.56 1-3/4 – 19/32
2-3/647-185-551 140.51 – – 3-3/4
7/8 1-1/167-185-552 157.81 – – 5-3/47-185-553 167.43 – – 7-3/4
1
– – 7-185-160 188.37 2 – 25/32
2-3/87-185-561 138.99 – – 4
1 1-1/87-185-562 174.56 – – 67-185-563 174.95 – – 87-185-567 293.81 – – 12 1-5/8
1-1/4
– – 7-185-170 188.37 2 – 25/32
2-3/47-185-571 159.44 – – 4
1 1-1/87-185-572 169.20 – – 67-185-573 179.61 – – 87-185-577 315.27 – – 12 1-7/8
1-1/2
– – 7-185-180 193.40 2-1/2
1
1
3-9/647-185-581 178.17 – – 4
1-1/87-185-582 197.76 – – 67-185-583 217.04 – – 8
27-185-591 201.67 – – 5-5/8 – 1
3-15/167-185-592 220.22 – – 7-5/81-7/16 1-3/16
7-185-593 268.10 – – 9-5/8
2-1/2 7-185-595 274.19 – – 6 1-7/16 1-3/16 4-1/4
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 513
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
514 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TaperSize
Balanced 7000 RPMPart Number
RetailPrice
Balanced 15000 RPMG 6.3
Part Number
RetailPrice
d L1 L2 D
inches
40
7-186-403 152.90 7-186-005 155.74 1 /21-3/8
9/16 1-3/8
7-186-405 142.33 7-186-010 150.303/4 11/16 1-3/4
– – 7-186-015 175.15 4
7-186-407 140.68 7-186-020 172.08
12-1/16
11/16 2-1/47-186-407C* 154.76 7-186-020 172.08
– – 7-186-025 166.50 4
7-186-409 143.90 7-186-030 171.901-1/4
2-1/811/16 2-3/4
– – 7-186-035 181.01 4
7-186-411 170.04 7-186-040 213.161-1/2
2.4015/16 3-3/4
– – 7-186-045 232.37 4
50
7-186-505 213.02 – –1/2
3-1/29/16 1-3/8
7-186-507 230.54 – – 5-1/2
7-186-509 198.42 – –
3/4
1-1/2
11/16 1-3/4
7-186-511 215.62 – – 3-1/2
7-186-512 224.10 – – 4-1/2
7-186-513 233.17 – – 5-1/2
7-186-514 551.77 – – 9
7-186-515 184.74 – –
1
2
11/16 2-1/47-186-517 215.23 – – 4
7-186-519 187.00 – – 6
7-186-520 508.23 – – 10
7-186-521 189.06 – –
1-1/4
1-1/2
11/16 2-3/47-186-525 241.13 – – 5-1/2
7-186-526 347.58 – – 12
7-186-527 227.38 – –
1-1/2
2.40
15/16 3-3/47-186-529 241.44 – – 4
7-186-531 258.40 – – 6
7-186-532 564.16 – – 12
7-186-533 316.45 – –
2
2.40
15/16 4-7/87-186-535 336.67 – – 4
7-186-537 361.25 – – 6
7-186-540 324.83 – –
2-1/22.40
1-1/8 4-7/87-186-540C* 357.30 – –
7-186-543 369.90 – – 6
Shell End Mill Holders• Shell Mill Pilot T.I.R. < .0002"• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8" - 11
CAT 50 1" - 8
Type 7385
* Has through the spindle coolant capability
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 514
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
515
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Shell End Mill Holders Spare Parts
TaperSize
Shell End Mill HolderPart Numbers
Set Screw
Part Number Retail Price Thread
40
7-186-403 7-186-005 7-080-005 8.22 1/4-28
7-186-405 7-186-0107-080-010 8.93 3/8-24
– 7-186-015
7-186-407 7-186-020
7-080-015 10.08 1/8-207-186-407C* 7-186-020
– 7-186-025
7-186-409 7-186-0307-080-020 12.01 5/8-18
– 7-186-035
7-186-411 7-186-0407-080-025 15.15 3/4-16
– 7-186-045
50
7-186-505 –7-080-005 8.22 1/4-28
7-186-507 –
7-186-509 –
7-080-010 8.93 3/8-24
7-186-511 –
7-186-512 –
7-186-513 –
7-186-514 –
7-186-515 –
7-080-015 10.08 1/8-207-186-517 –
7-186-519 –
7-186-520 –
7-186-521 –
7-080-020 12.01 5/8-187-186-525 –
7-186-526 –
7-186-527 –
7-080-025 15.15 3/4-167-186-529 –
7-186-531 –
7-186-532 –
7-186-533 –
7-080-030 21.47 1-147-186-535 –
7-186-537 –
7-186-540 –
7-080-035 25.13 1-147-186-540C* –
7-186-543 –
Key
Part Number Retail Price L B H
7-080-105 11.03 0.36 0.25 0.25
7-080-110 11.03 0.40 0.31 0.27
7-080-115 11.43 0.44 0.37 0.33
7-080-120 11.91 0.56 0.50 0.39
7-080-125 11.10 1.03 0.62 0.52
7-080-105 11.03 0.36 0.25 0.25
7-080-110 11.03 0.40 0.31 0.27
7-080-115 11.43 0.44 0.37 0.33
7-080-120 11.91 0.56 0.50 0.39
7-080-125 11.10 1.03 0.62 0.52
7-080-130 14.07 1.34 0.75 0.68
7-080-135 13.98 1.18 0.75 0.68
Key Screw
Part Number Retail Price
7-080-150 1.08
7-080-155 1.80
7-080-160 1.80
– –
– –
7-080-170 2.05
7-080-150 1.08
7-080-155 1.80
7-080-160 1.80
7-080-170 2.05
7-080-175 1.08
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 515
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
516 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Face Mill Holders• Shell Mill Pilot T.I.R. < 0.0002"• Holders are provided with four mounting holes with 5/8"-11 thread on
a 4" bolt circle diameter to hold 8" or larger Face Mill Cutters• Retention knobs sold separately• Draw Bar Threads: CAT 50 1" - 8
TaperSize
Arbor DiaD2
PartNumber
RetailPrice L1 L2 L3 Drive Key
L4 D1
50
27-182-502 363.01 7.3 2.4
15/16 3/4 4.887-182-504 324.31 8.9 4
2-1/27-182-512 290.80 7.5 2.4
1-1/8 1 5.067-182-514 345.66 9.1 4
Type 7382
Type 7655
Precision Ball Bearing Keyless Drill ChucksIntegral CAT V-Flange• CAT shanks are produced according to AT3 specification• Made of Alloy Forged Steel for a long, durable service life• Integral shank design is more compact than a combined
drill chuck and arbor for greater accuracy and rigidity
Taper SizeK
PartNumber
RetailPrice
Capacity d1 D L
inches mm inches
407-187-433 250.30 1/32-1/2 1-13 2 4.13
7-187-435 268.54 1/8-5/8 3-16 2-1/4 5.12
507-187-563 297.86 1/32-1/2 1-13 2 4.13
7-187-565 316.21 1/8-5/8 3-16 2 1/4 4.33
WrenchPart Number
RetailPrice
7-188-932K 12.00
• Keyless operations• Self-tightening, clockwise rotation only• Maximum T.I.R. 0.0015"• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 516
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
517
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Stub Arbor Holders• Face is held perpendicular to centerline within 0.0002"• Pilot diameter is sized for precision fit with cutter, and keyed for positive drive• Heavy duty locking right-hand nut and 5 arbor spacers are included: 1/16", 1/8", 1/4", 3/8", and 3/4"• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
NutPart
Number
RetailPrice
1/16"Spacer 2 Pc
PartNumber
RetailPrice
7-030-010R 35.74 7-020-090 9.69
7-030-015R 40.81 7-020-175 9.40
7-030-020R 70.72 7-020-260 12.24
7-030-010R 35.74 7-020-090 9.69
7-030-010R 35.74 7-020-090 9.69
7-030-015R 40.81 7-020-175 9.40
7-030-015R 40.81 7-020-175 9.40
7-030-020R 70.72 7-020-260 12.24
7-030-020R 70.72 7-020-260 12.24
TaperSize
HolderPart
Number
1/8"Spacer 1 PcPart Number
RetailPrice
1/4"Spacer 1 PcPart Number
RetailPrice
3/8"Spacer 2 PcPart Number
RetailPrice
3/4"Spacer 1 PcPart Number
RetailPrice
40
7-191-410 7-020-100 10.17 7-020-110 11.78 7-020-120 12.70 7-020-140 16.39
7-191-415 7-020-185 9.98 7-020-195 12.01 7-020-205 13.09 7-020-225 17.09
7-191-420 7-020-270 12.77 7-020-280 14.53 7-020-290 15.81 7-020-310 19.96
50
7-191-510 7-020-100 10.17 7-020-110 11.78 7-020-120 12.70 7-020-140 16.39
7-191-515 7-020-100 10.17 7-020-110 11.78 7-020-120 12.70 7-020-140 16.39
7-191-520 7-020-185 9.98 7-020-195 12.01 7-020-205 13.09 7-020-225 17.09
7-191-525 7-020-185 9.98 7-020-195 12.01 7-020-205 13.09 7-020-225 17.09
7-191-530 7-020-270 12.77 7-020-280 14.53 7-020-290 15.81 7-020-310 19.96
7-191-535 7-020-270 12.77 7-020-280 14.53 7-020-290 15.81 7-020-310 19.96
TaperSize
PartNumber
RetailPrice
ArborDia d A d1 L B
inches
40
7-191-410 227.60 1
4
1.5 7.5
27-191-415 250.99 1.25 1.75 7.75
7-191-420 298.87 1.5 2.125 8.0
50
7-191-510 297.351
41.5
7.5
2
7-191-515 340.72 6 9.5
7-191-520 309.641.25
41.75
7.75
7-191-525 366.57 6 9.75
7-191-530 377.651.5
42.125
8.0
7-191-535 431.06 6 10.0
Type 7318
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 517
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
CAT V-Flange ToolingCATV-FLA
NGETO
OLING
518 CAT V-FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Please refer to ourTMX HSS Cutting and Measuring Toolcatalog and www.toolmex.com fora full selection of Slitting Saws
Semi Flush Slitting Saw Holders• Face is held perpendicular to centerline within 0.0002"• Designed for slitting saws up to 5/16" thick• Use a Stub Arbor Holder for wider cutters• Pilot diameter is sized for precision fit with cutter and is keyed for positive drive• Semi-flush nose cap gets in tight areas• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
Type 7374
TaperSize K
HolderPart Number Cap Retail
PriceDriveKey
RetailPrice
HexKey
RetailPrice
40
7-192-405 – – 7-192-805 11.00 6-999-586 .99
7-192-410 7-192-910 47.74 7-192-810 11.206-999-588 1.14
7-192-415 7-192-915 39.70 7-192-815 11.40
50 7-192-510 7-192-910 47.74 – – 6-999-588 1.14
TaperSize K
PartNumber
RetailPrice
ArborDia d A B Holder
ScrewSizeinches
40
7-192-405 166.95 5/8
4 1.77
M8 x 1.25
7-192-410 173.25 1M10 x 1.5
7-192-415 187.76 1-1/4
50
7-192-510 223.581
4 1.77
M10 x 1.57-192-515 254.98 6 3
7-192-520 232.371-1/4
4 1.77
7-192-525 282.81 6 3
Taper SizeK Part Number Retail
PriceJacobs Taper
JT L L1 L2
40
7-181-402 76.46 2 5.062
1.50
2.375
7-181-403 77.53 3 5.406 2.719
7-181-404 78.61 4 5.844 3.156
7-181-406 76.98 65.187 2.500
7-181-433 76.98 33
50
7-181-503 135.55 3 6.718
1.50
2.719
7-181-504 138.99 4 7.157 3.156
7-181-505 140.68 5 7.375 3.375
7-181-506 133.68 66.500 2.500
7-181-533 133.68 33
Jacobs Taper Holders CAT 40 and 50• Jacobs Taper T.I.R. < 0.0002"• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11
and CAT 50 1"- 8See page 516 for
precision drill chucks
Type 5357
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 518
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
519
CATV-FLA
NGETO
OLIN
G
CAT V-Flange Tooling
Quality Products • Partnership • Industry Experts CAT V-FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Morse Taper Adapters CAT 40 and 50• Produced according to AT3 specifications• Made of Alloy Forged Steel for long, durable service life• Morse Taper Seat T.I.R. < 0.0002"
• Hardened to RC 56-60 and ground to ensure maximum accuracy• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
TaperSizeK
PartNumber
RetailPrice
Taper NumberHole K1 A D d
50 7-184-504 234.24 40 3.150 3.46 .65
Type 1684
CAT 50 to CAT 40 Adapters• Produced according to AT3 specifications• Made of Alloy Forged Steel for long, durable service life• Morse Taper Seat T.I.R. < 0.0002"• Each Adapter is provided with the draw bar screw with the thread 5/8" - 11• Retention knobs sold separately• Draw Bar Threads: CAT 40 5/8"-11 and CAT 50 1"- 8
TaperSizeK
PartNumber
RetailPrice
MTHoleK1
D L A
40
7-183-402 84.50 2 1-1/4 5-9/16 2
7-183-403 88.41 3 1-3/4 6-9/16 3
7-183-404 98.66 4 2 7-1/16 3-1/2
50
7-183-502 140.40 2 1-1/4 6 2
7-183-503 145.31 3 1-5/8 6-1/2 2-1/2
7-183-504 158.81 4 2 7-3/8 3-3/8
7-183-505 180.87 5 2-3/4 8 4
Type 1691
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 519
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
BT Flange ToolingBTFLANGETO
OLING
520 BT FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks BT 40 and 50• Completely interchangeable with all ISO Compliant ER Collets• Produced according to AT3 specifications• Collet seat taper T.I.R. < .0002"• Made of Alloy Forged Steel for a long durable service life• Through spindle coolant capability
17 PieceER Collet Chuck Set
TaperSize
Balanced7000 RPM
PartNumber
RetailPrice
Balanced15000 RPM
G6.3Part Number
RetailPrice
ColletType
ClampingRange L D
inches
40
– – 7-178-014 159.00 ER 16 1/32 to 25/64 3.55 1.10
7-178-425 155.26 7-178-025 159.00 ER 25 .047 to .625 2.36 1.65
7-178-432 159.33 – –
ER 32 1/8 to 3/4
2.75
2.007-178-434 166.31 7-178-042 159.00 4.00
7-178-436 197.20 – – 6.00
7-178-442 175.81 – –
ER 40 1/8 to 1
2.75
2.507-178-444 175.81 – – 4.00
7-178-446 207.44 – – 6.00
507-178-532 190.18 7-178-132 189.00 ER 32 1/8 to 3/4 2.75 2.00
7-178-542 210.29 7-178-142 209.00 ER 40 1/8 to 1 3.15 2.50
NutPart
Number
RetailPrice
WrenchPart
Number
RetailPrice
7-178-816 26.25 7-178-916 27.78
7-188-825 31.63 7-188-925 19.70
7-188-832 34.38 7-188-932 22.54
7-188-840 41.68 7-180-930 29.07
7-188-832 34.38 7-188-932 22.54
7-188-840 41.68 7-180-930 29.07
Regular Length
Type 7626
• Hardened to RC 52-56 and ground to ensure maximum accuracy• For Individual ER Collets see pages 552-555• Draw Bar Threads: BT 40 M16 x 2
BT 50 M24 x 3
ER 20 - ER 40
ER 11 and ER 16 areprovided with hex nut
TaperSize
SetPart Number
RetailPrice
ColletsIncluded in Set
Holderincluded in set
BT40 7-178-449 516.001/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16",
5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"7-178-442
BT50 7-178-549 664.141/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" 9/16",
5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"7-178-542
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 520
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
521
BTFLA
NGETO
OLIN
G
BT Flange Tooling
Quality Products • Partnership • Industry Experts BT FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TaperSize
Balanced 7000 RPM ColletType
Clamping Range L D
Part Number Retail Price inches
407-177-415 182.39
DA 180 .125 to .7502.75
1.547-177-424 186.05 4.00
Type 7650
Double Angle Collet Chucks BT 40• Completely Interchangeable with all ISO compliant DA Collets• Produced according to AT3 specifications• Collet seat taper T.I.R. < .0002"• Made of Alloy Forged Steel for a long durable service life
• Hardened to RC 52-56 and ground to ensure maximum accuracy• Through spindle coolant capability• Retention knobs are sold separately• Draw Bar Threads: BT 40 M16 x 2
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-193-818 33.81 7-193-918 17.38
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-178-816 26.25 7-178-916 27.78
TaperSize
PartNumber
RetailPrice
ColletType
Clamping Range L D
inches
BT 407-178-414 159.33
ER 16 .031 to .3913.94
1.107-178-416 175.81 5.91
BT 507-178-514 186.05
ER 16 .031 to .3913.94
7-178-516 198.41 5.91
Type 7626-S
Extension Type
ER 11 - ER 16
ER Collet Chucks BT 40 and 50• Completely interchangeable with all ISO Compliant ER Collets• Produced according to AT3 specifications• Collet seat taper T.I.R. < .0002"• Made of Alloy Forged Steel for a long durable service life• Through spindle coolant capability
• Hardened to RC 52-56 and ground to ensure maximum accuracy• For Individual ER Collets see pages 552-555• Draw Bar Threads: BT 40 M16 x 2
BT 50 M24 x 3
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 521
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
BT Flange ToolingBTFLANGETO
OLING
522 BT FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TG Collet Chucks BT 30, 40, and 50• Completely interchangeable with all TG Collets• Produced according to AT3 specifications• Collet seat taper T.I.R. < .0002"• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 52-56 and ground to ensure maximum accuracy
TaperSize
Balanced7000 RPM
PartNumber
RetailPrice
Balanced15000 RPM
G6.3Part Number
RetailPrice
ColletType
ClampingRange D L
inches30 7-172-304 119.50 – – 100 .094 to 1.0 2.50 4.00
40
7-172-401 148.25 – – 75 .125 to .750 2.1253.00
7-172-403 124.00 7-172-003 119.50
100 .094 to 1.0
2.50
7-172-405 172.92 7-172-005 122.50 1.5625 5.00
7-172-407 186.89 – – 1.875 7.00
50
7-172-503 183.97 – –100 .094 to 1.0 2.50
3.50
7-172-505 207.44 – – 5.50
7-172-512 215.00 – – 150 .5 to 1.5 3.50 4.00
Type 7619
• Through spindle coolant capability• Retention knobs are sold separately• Draw Bar Threads: BT 30 M12 x 1.75
BT 40 M16 x 2BT 50 M24 x 3
NutPart
Number
RetailPrice
WrenchPart
Number
RetailPrice
– – 7-180-930 29.07
7-180-901 57.64 – –
– – 7-180-930 29.07
– – 7-180-930 29.07
– – 7-180-935 29.56
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 522
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
523
BTFLA
NGETO
OLIN
G
BT Flange Tooling
Quality Products • Partnership • Industry Experts BT FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TaperSize
Balanced7000 RPM
PartNumber
RetailPriceRetail
Price
Balanced15000 RPM
G6.3Part Number
RetailPrice
d L D C B
inches
40
7-179-402 92.61 7-179-002 88.50 3/16 .1875
2.50
.78 .56–
7-179-404 92.61 7-179-004 88.20 1/4 .250 –
7-179-407 90.56 7-179-007 88.20 5/16 .3125 .87 .72 –
7-179-411 90.56 7-179-011 88.203/8 .375 1.12 .75 –
7-179-415 94.60 – – 4.00
7-179-421 90.56 7-179-021 88.201/2 .500
2.501.50 .88 –
7-179-425 94.60 – – 4.00
7-179-431 90.56 7-179-031 88.205/8 .625
2.501.62 .94 –
7-179-435 94.60 – – 4.00
7-179-441 92.61 7-179-041 88.203/4 .750
2.501.75
1.00
–7-179-445 96.64 – – 4.00
7-179-451 92.94 7-179-051 88.20 7/8 .8753.50
2.17 1.81
7-179-461 97.38 7-179-061 88.201 1.000 2.38
2.00
7-179-465 102.63 – – 5.00 1.12 2.12
7-179-475 100.49 – – 1-1/4 1.250 4.00 2.69 1.00 –
50
7-179-511 138.73 – – 3/8 .375
3.00
1.12 .75 –
7-179-521 138.84 – – 1/2 .500 1.50 .88 –
7-179-531 138.79 – – 5/8 .625 1.62 .94 –
7-179-541 139.37 – – 3/4 .750 1.75
1.00
–
7-179-561 151.10 – – 1 1.000
4.00
2.48
2.007-179-571 157.13 – – 1-1/4 1.250 2.69
7-179-581 178.60 – – 1-1/2 1.500 2.88
7-179-591 216.35 – – 2 2.000 5.00 3.62 1.38 2.88
Type 7624
End Mill Holders BT 40 and 50• Produced according to AT3 specifications• Made of Alloy Forged Steel for long durable service life• Jacobs Taper T.I.R. < .0002"• End Mill Socket T.I.R. < 0.0002"• Hardened to RC 52-56 and ground to ensure maximum accuracy• Through spindle coolant capability• Draw Bar Threads: BT 40 M16 x 2
BT 50 M24 x 3
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 523
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
BT Flange ToolingBTFLANGETO
OLING
524 BT FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
End Mill Holders BT 40 and 50 Set Screw
TaperSize
Balanced7000 RPM
Part Number
Balanced15000 RPM
G6.3Part Number
Set Screw
Part Number Retail Price Qty Thread
40
7-179-402 7-179-002 7-195-110 1.00
1
1/4-28 x 1/47-179-404 7-179-004 – –
7-179-407 7-179-007 7-195-120 1.00 5/16-24 x 1/4
7-179-411 7-179-011 7-195-210 2.753/8-24 x 25/64
7-179-415 – – –
7-179-421 7-179-021 7-195-301 3.757/16-20 x 15/32
7-179-425 – – –
7-179-431 7-179-0317-195-412 4.40 9/16-18 x 15/32
7-179-435 –
7-179-441 7-179-0417-195-513 5.00 5/8-18 x 33/64
7-179-445 –
7-179-451 7-179-051 7-195-517 5.00
2
5/8-18 x 19/32
7-179-461 7-179-061
7-195-618 5.40 3/4-16 x 45/647-179-465 –
7-179-475 –
50
7-179-511 – 7-195-210 2.75
1
3/8-24 x 25/64
7-179-521 – 7-195-301 3.75 7/16-20 x 15/32
7-179-531 – 7-195-412 4.40 9/16-18 x 15/32
7-179-541 – 7-195-513 5.00 5/8-18 x 33/64
7-179-561 – 7-195-618 5.40
2
3/4-16 x 45/647-179-571 – 7-195-210 2.75
7-179-581 – 7-195-301 3.75 3/4-16 x 25/32
7-179-591 – 7-195-412 4.40 1-14 x 15/16
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 524
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
525
BTFLA
NGETO
OLIN
G
BT Flange Tooling
Quality Products • Partnership • Industry Experts BT FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 7388
TaperSize
Balanced7000 RPM
Part Number
RetailPrice
d D L L1
inches
40
7-176-403 114.11 1/2 1.18 1.75 .56
7-176-405 114.89 3/4 1.502.00
.697-176-407 123.36 1 1.73
7-176-409 132.12 1-1/4 2.082.25
7-176-411 145.37 1-1/2 2.48 .92
50
7-176-509 181.493/4 1.5
2.25
.69
7-176-511 200.42 6.00
7-176-515 184.63
1 1.73
2.00
7-176-517 198.03 4.00
7-176-519 212.93 6.00
7-176-521 189.18
1-1/4 2.08
2.50
7-176-523 208.89 4.00
7-176-525 226.27 6.00
7-176-527 198.13
1-1/2 2.48
2.50
.927-176-529 209.74 4.00
7-176-531 224.63 6.00
7-176-533 224.382 3.07
2.50.94
7-176-535 237.91 4.00
Shell End Mill Holders BT 40 and 50• Produced according to AT3 specifications• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 52-56 and ground to ensure maximum accuracy• Shell End Mill Pilot T.I.R. < 0.0002"
• Draw Bar Threads: BT 40 M16 x 2BT 50 M24 x 3
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 525
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
BT Flange ToolingBTFLANGETO
OLING
526 BT FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Shell End Mill Holders BT 40 and 50 Spare Parts
TaperSize
Balanced7000 RPM
Part Number
Arbor Screw
Part Number Retail Price Thread
40
7-176-403 7-080-005 8.22 1/4-28
7-176-405 7-080-010 8.93 3/8-24
7-176-407 7-080-015 10.08 1/2-20
7-176-409 7-080-020 12.01 5/8-18
7-176-411 7-080-025 15.15 3/4-16
50
7-176-5097-080-010 8.93 3/8-24
7-176-511
7-176-515
7-080-015 10.08 1/2-207-176-517
7-176-519
7-176-521
7-080-020 12.01 5/8-187-176-523
7-176-525
7-176-527
7-080-025 15.15 3/4-167-176-529
7-176-531
7-176-5337-080-030 21.47 1-14
7-176-535
Key
Part Number Retail Price L B H
– –.61
.25 .28
7-080-210 11.09 .31.31
7-080-215 11.39 .80 .37
7-080-220 11.98 .94 .50 .34
7-080-225 12.67 1.08 .62 .41
7-080-210 11.09 .61 .31
.31
7-080-215 11.39 .80 .37
7-080-220 11.98 .94 .50 .34
7-080-225 12.67 1.08 .62 .41
– – 1.28 .75 .44
Key Screw
Part Number Retail Price
7-080-155 1.80
7-080-160 1.80
– –
7-080-155 1.80
7-080-160 1.80
– –
7-080-170 2.05
Precision Ball Bearing Keyless Drill Chucks with Integral BT Flange• CAT and BT shanks are produced according to AT3 specification• Made of Alloy Forged Steel for a long durable service life• Integral shank design is more compact than a combined
drill chuck and arbor for greater accuracy and rigidity• Keyless operations• Self-tightening, clockwise rotation only• .00015" maximum T.I.R.• Draw Bar Threads: BT 30 M12 x 1.75
BT 40 M16 x 2BT 50 M24 x 3
TaperSize K
PartNumber
RetailPrice
Capacity d1 D L Wtlbsinches mm Inches
307-174-306 142.50 0 to .250 0 to 6.35 1.42 3.20 1.60
7-174-310 170.50 .016 to .375 .397 to 9.525 1.56 3.80 2.0
407-174-433 220.90 .031 to .500 .794 to 12.7 2.00 3.74 4.40
7-174-435 237.97 .125 to .625 3.175 to 15.875 2.25 3.94 5.28
507-174-563 271.36 .031 to .500 .794 to 12.7 2.00 4.13 10.12
7-174-565 288.68 .125 to .625 3.175 to 15.875 2.25 4.33 11.44
Wrench
Part Number Retail Price
7-188-916 17.38
7-188-925 19.70
7-188-932K 12.00
Type 7656
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 526
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
527
BTFLA
NGETO
OLIN
G
BT Flange Tooling
Quality Products • Partnership • Industry Experts BT FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Jacobs Taper Holders BT 30, 40, and 50• Produced according to AT3 specifications• Made of Alloy Forged Steel for long durable service life• Jacobs Taper T.I.R. < .0002"• Hardened to RC 56-60 and ground to ensure maximum accuracy• Retention knobs are sold separately• Draw Bar Threads: BT 30 M12 x 1.75
BT 40 M16 x 2BT 50 M24 x 3
TaperSizeK
PartNumber
RetailPrice
JacobsTaper L1 Wt
lbs
30
7-175-302 71.51 2
1.0 1.357-175-303 71.51 3
7-175-333 71.51 33
40
7-175-402 70.42 2
1.75
3.1
7-175-403 71.41 3 3.2
7-175-404 72.65 4 3.5
7-175-406 70.82 6 3.2
7-175-433 70.82 33 3.1
50
7-175-503 130.38 3 8.6
7-175-504 133.39 4 9.4
7-175-506 128.70 6 8.8
7-175-533 128.70 33 8.7
Morse Taper Adapters BT 40 and 50• Produced according to AT3 specifications• Made of Alloy Forged Steel for long, durable service life• Morse Taper Seat T.I.R. < .0002"• Hardened to RC 56-60 and ground to ensure maximum accuracy• Retention knobs are sold separately• Draw Bar Threads: BT 40 M16 x 2
BT 50 M24 x 3
TaperSizeK
PartNumber
RetailPrice MT D L Wt
lbs
40
7-173-401 90.34 1 1 1.75 2.2
7-173-402 90.34 2 1.25 2 2.4
7-173-403 84.45 3 1.5625 3 2.7
7-173-404 86.65 4 1.875 3.5625 2.9
50
7-173-502 120.91 2 1.251.75
8.1
7-173-503 123.58 3 1.5625 8.2
7-173-504 141.43 4 1.875 3 8.4
7-173-505 152.16 5 2.5 4.125 8.8
Type 1661
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 527
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
HSK Flange ToolingHSK
FLANGETO
OLING
528 HSK FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
HSK Form A Collet Chucks: ER 25, 32, and 40
Shank ColletType
PartNumber
RetailPrice
ClampingRange
dL D
HSK63A
ER 25 7-305-6253 127.50 3/64 - 5/8 3.15 1.654
ER 327-305-6324 147.90
1/8 - 3/44.00
1.9697-305-6321 129.00 3.00
ER 407-305-6401 136.00
1/8 - 13.15
2.4807-305-6402 161.50 5.00
ER 16Balanced Nut and Wrench
BalancedNut
Part Number
RetailPrice
WrenchPart Number
RetailPrice
7-188-825 31.63 7-188-925 19.70
7-188-832 34.38 7-188-932 22.54
7-188-840 41.68 7-180-930 29.07
Shank PartNumber
RetailPrice d D L L1
Set Screw
Part Number Retail Price Thread Numberof Screws
HSK63A
7-306-6005 120.00 3/16 .75
3.00
1.007-195-110 1.00 1/4-28
1
7-306-6010 120.00 1/4 .82 1.45
7-306-6015 120.00 5/16 .861.53
7-195-120 1.00
5/16-24
7-306-6020 120.00 3/8 1.06 3.503/8-24
7-306-6025 120.00 7/16 1.26
4.00
1.70
7-306-6030 120.00 1/2 1.37 1.77 7-195-312 3.75 7/16-20
7-306-6035 120.00 5/81.75
2.20 7-195-415 4.40 9/16-18
7-306-6040 145.00 3/4
4.50
2.32 7-195-513 5.005/8-18
7-306-6045 145.20 7/8 2.042.87
7-195-517 5.00
27-306-6050 145.00 1 2.377-195-618 5.40 3/4-16
7-306-6054 145.20 1-1/4 2.75 3.45
HSK Form A End Mill Holders• Tooling shanks DIN 69893
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 528
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
529
HSK
FLANGETO
OLIN
G
HSK Flange Tooling
Quality Products • Partnership • Industry Experts HSK FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
HSK Form A Integral Shank Keyless Drill Chuck• Tooling shanks DIN 69893
Precision Ball Bearing, Keyless Drill Chucks• Tooling shanks DIN 69893• Heavy Duty• NC Quality
ChuckCapacity Part
NumberRetailPrice Mount Wt
lbsinches mm
1/32 - 1/2 1 - 13
7-051-335 154.83 2J
1.87-051-337 154.83 33J
7-051-338 154.83 6J
1/8 - 5/8 3 - 167-051-368 182.00 6J 1.98
7-051-369 182.52 3J 2.00
HSK Form A Jacobs Taper Holder• Tooling shanks DIN 69893
Shank PartNumber
RetailPrice
JacobsTaper L
HSK63A
7-309-6001 97.50 J1
1.75
7-309-6002 97.50 J2
7-309-6003 97.50 J3
7-309-6004 97.50 J4
7-309-6005 97.50 J5
7-309-6006 107.50 J6
7-309-6035 107.50 J33
Part Number Retail Price Shank d D L
7-311-6005 250.50HSK63A
1/32-1/2 2.00 5.85
7-311-6008 261.30 1/8-5/8 2.25 6.18
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 529
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
NMTB Flange ToolingNMTB
FLANGETO
OLING
530 NMTB FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER 25 - 40
ER Collet Chucks with NST/NMTB Shanks
Type 7616
Draw Bar Thread#30 1/2"-13#40 5/8"-11#50 1" - 8
ER 16
ColletType
ShankSize
PartNumber
RetailPrice L D Shank Type
ER 16
30
7-171-173 93.51 2.00 1.26 NMTB and NST
ER 32 7-171-303 97.45 2.50 1.97 NMTB and NST
ER 40 7-171-403 105.92 3.50 2.48 NMTB and NST
ER 16
40
7-171-174 113.62 2.50 1.26 NMTB and NST
ER 25 7-171-264 112.97 2.50 1.65 NMTB and NST
ER32 7-171-304 101.64 3.00 1.97 NMTB and NST
ER 40 7-171-404 126.53 2.50 2.48 NMTB and NST
ER 40 50 7-171-405 152.59 2.75 2.48 NMTB and NST
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-178-816 26.25 7-178-916 27.78
7-188-832 34.387-188-932 22.54
7-188-840 41.68
7-178-816 26.25 7-178-916 27.78
7-188-825 31.63 7-188-925 19.70
7-188-832 34.387-188-932 22.54
7-188-840 41.687-180-930 29.01
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 530
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
531
NMTB
FLANGETO
OLIN
G
NMTB Flange Tooling
Quality Products • Partnership • Industry Experts NMTB FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TaperSize
PartNumber
RetailPrice
ColletType
ClampingRange L D
30 7-167-013 127.80
DA180 1/4"-3/4"
3
1.5440 7-167-014 157.23 3
50 7-167-015 189.29 3-1/2
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-193-818 33.81 7-193-918 17.38
DA180 Collet Chucks with NST/NMTB Shanks
Type 7665
Draw Bar Thread#30 1/2"- 13#40 5/8"- 11#50 1" - 8
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-180-901 57.64 7-188-932 22.54
7-180-901 57.64 – –
7-180-9100 67.36 7-180-930 29.07
7-180-9100 67.36 7-180-930 29.07
7-180-9150 77.06 7-180-935 29.56
ShankSize
PartNumber
RetailPrice Size L D
30 7-132-305 131.24 TG75 2-1/2 2-1/8
407-132-405 139.91 TG75 2-1/2 2-1/8
7-132-410 145.96 TG100 3 2-1/2
507-132-510 151.92 TG100 3-1/2 2-1/2
7-132-535 350.61 TG150 5 3-1/2
Type 7640
Draw Bar Thread#30 1/2"-13#40 5/8"-11#50 1" - 8
TG Collet Chucks with NST/NMTB Shanks
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 531
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
NMTB Flange ToolingNMTB
FLANGETO
OLING
532 NMTB FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
End Mill Holders NMTB 30, 40 and 50• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Shell end mill pilot T.I.R. < 0.0004"• Produced according to AT3 specifications• Draw bar threads: 30 1/2" - 13
40 5/8" - 1150 1" - 8
• Compatible with Ericson quick change
NST/NMTBTaper
HoleDia
HolderPart Number
RetailPrice
SetPart Number
RetailPrice
GageLength
L
30
3/16 7-165-005Q 65.72
7-165-300Q7 Pc Set
7-165-307Q8 Pc Set
492.19
579.96
21/4 7-165-007Q 79.20 2
3/8** 7-165-010Q 66.20 21/2** 7-165-015Q 65.65 25/8** 7-165-020Q 69.41 2.53/4** 7-165-025Q 71.44 2.57/8** 7-165-026Q** 91.35 41** 7-165-027Q** 97.39 4
40
3/16 7-165-030Q 78.78
7-165-400Q9 Pc Set
7-165-409Q10 Pc Set
778.39
950.40
21/4 7-165-032Q 78.32 2
3/8** 7-165-035Q 77.95 21/2** 7-165-040Q 77.92 25/8** 7-165-045Q 81.32 2.53/4** 7-165-050Q 83.35 2.57/8** 7-165-055Q 97.89 3.51** 7-165-060Q 101.33 3.5
1-1/4** 7-165-065Q** 103.81 41-1/2** 7-165-070Q** 116.64 4
50
3/16 7-165-073Q 135.29
7-165-510Q10 Pc Set
1,463.56
2.753/8 7-165-075Q 133.89 2.751/2 7-165-080Q 132.71 2.755/8 7-165-085Q 134.64 2.753/4 7-165-090Q 137.45 2.875
7/8** 7-165-095Q 148.12 2.8751** 7-165-100Q 156.79 3.5
1-1/4** 7-165-105Q** 157.87 3.51-1/2** 7-165-110Q** 165.18 4
2** 7-165-115Q** 184.12 4.6875
Set Screw
Part Number Retail Price Thread7-195-091 1.00 10-32 x 5/167-195-110 1.00 1/4-28 x 1/47-195-208 2.90 3/8-24 x 5/167-195-314 3.75 7/16-20 x 25/647-195-412 4.40 9/16-18 x 15/327-195-513 5.00 5/8-18 x 1/27-195-513 5.00 5/8-18 x 1/27-195-615 5.40 3/4-16 x 19/32
7-195-091 1.00 10-32 x 5/167-195-110 1.00 1/4-28 x 1/47-195-208 2.90 3/8-24 x 5/167-195-314 3.75 7/16-20 x 25/647-195-412 4.40 9/16-18 x 15/327-195-513 5.00 5/8-18 x 1/27-195-513 5.00 5/8-18 x 1/27-195-615 5.40 3/4-16 x 19/327-195-615 5.40 3/4-16 x 19/327-195-615 5.40 3/4-16 x 19/32
7-195-091 1.00 10-32 x 5/167-195-208 2.90 3/8-24 x 5/167-195-314 3.75 7/16-20 x 25/647-195-412 4.40 9/16-18 x 15/327-195-513 5.00 5/8-18 x 1/27-195-513 5.00 5/8-18 x 1/27-195-615 5.40 3/4-16 x 19/327-195-615 5.40 3/4-16 x 19/327-195-615 5.40 3/4-16 x 19/327-195-820 14.00 1-14 x 53/64
** Holders are only for single end mills
Type 7620
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 532
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
533
NMTB
FLANGETO
OLIN
G
NMTB Flange Tooling
Quality Products • Partnership • Industry Experts NMTB FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Shell Mill Holders NMTB 30, 40 and 50
Extended Shell Mill Holders NMTB 40 and 50
• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Shell end mill pilot T.I.R. <0.0004"• Each set is provided with a wooden case• Compatible with Ericson quick change
NST/NMTBShank
PartNumber
RetailPrice
ArborDia
GageLength
Wtlbs
30
7-060-005Q 99.33 1/2.689
0.82
7-060-010Q 101.23 3/4 0.95
7-060-015Q 112.06 1.929
1.26
7-060-020Q 125.57 1-1/4 1.32
40
7-060-030Q 114.06 3/4 .689 1.96
7-060-035Q 117.62 1
.937
2.25
7-060-040Q 131.31 1-1/4 2.45
7-060-045Q 175.15 1-1/2 2.76
7-060-050Q 257.10 2 3.44
50
7-060-060Q 164.48 3/4 .752 6.1
7-060-065Q 170.54 1
1.000
6.4
7-060-070Q 174.33 1-1/4 6.5
7-060-075Q 193.19 1-1/2 6.9
7-060-080Q 277.14 2 7.4
• Draw bar threads:NST/NMTB 30 1/2" - 13NST/NMTB 40 5/8" - 11NST/NMTB 50 1" - 8
Type 7060
NST/NMTBShank
PartNumber
RetailPrice
ArborDia
Wtlbs
407-075-002Q 121.32 3/4 3.5
7-075-005Q 124.99 1 3.9
50
7-075-010Q 194.46 1 8.6
7-075-015Q 194.46 1-1/4 10.6
7-075-020Q 211.62 1-1/2 13.5
Type 7320
• Draw bar threads:NST/NMTB 40 5/8" - 11NST/NMTB 50 1" - 8
• Compatible with Ericson quick change
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 533
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
NMTB Flange ToolingNMTB
FLANGETO
OLING
534 NMTB FLANGE TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Face Mill Holders NMTB 40, 50 and 60• NST Taper is produced according to AT3 specifications• Made of Alloy Forged Steel for a long durable service life• Holders have four mounting holes with the thread 5/8-11
on a 4" bolt circle to hold 8" or larger face milling cutters• Shell end mill pilot T.I.R. <0.0004"• Holders have 1" drive keys
Shank Holder Dia Part Number Retail Price Arbor Length Wt lbs
NST/NMTB 402 7-170-005 308.06
6.207.5
2-1/2 7-170-020 305.70 8.0
NST/NMTB 502 7-170-010 347.00
7.5611.5
2-1/2 7-170-025 344.68 11.8
NST/NMTB 60 2-1/2 7-170-030 1,561.02 10.70 45.2
Type 7349
• Draw Bar Threads:NST 40 5/8"- 1NST 50 1" - 8NST 60 1-1/4"- 7
Jacobs Taper Adapters NMTB 30, 40 and 50• Draw bar threads: 30 1/2" - 13
40 5/8" - 1150 1" - 8
• Compatible with Ericson quick change
Taper SizeK
PartNumber
RetailPrice JT L Wt
lbs
30
7-052-031Q 60.38 JT1
.47 1.37-052-033Q 57.40 JT3
7-052-0333Q 60.38 JT33
7-052-036Q 60.38 JT6
40
7-052-041Q 71.94 JT1
.55 2.2
7-052-042Q 72.72 JT2
7-052-043Q 74.75 JT3
7-052-0433Q 73.31 JT33
7-052-046Q 73.76 JT6
50
7-052-053 139.00 JT3
.71 5.97-052-0533 116.50 JT33
7-052-054Q 133.03 JT4
7-052-055 143.77 JT5
Type 5370
Morse Taper Adapters NMTB 40 and 50• Compatible with Ericson quick change
NSTShank
PartNumber
RetailPrice
MTSocket
GageLength
Draw BarThread
Wtlbs
40
7-100-005Q 91.11 2 1.969
5/8-11
1.98
7-100-010Q 94.35 3 2.559 2.2
7-100-015Q 103.78 4 3.740 3.09
50
7-100-024Q 135.03 2 0.906
1-8
9.26
7-100-025Q 140.56 3 1.299 9.26
7-100-030Q 155.03 4 2.087 8.16
7-100-035Q 180.17 5 3.386 6.61
• Draw bar threads:40 5/8" - 1150 1" - 8
Type 1657
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 534
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
535
NMTB
FLANGETO
OLIN
G
NMTB Flange Tooling
Quality Products • Partnership • Industry Experts NMTB FLANGE TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Integral Drill Chucks NMTB 40• Draw bar threads:
40 5/8" - 11• Compatible with Ericson
quick change
TaperSizeK
PartNumber
RetailPrice
ChuckCapacity
d1D G L1 Wt
lbs
407-048-420Q 141.90 1/32 - 1/2 2
5/8 - 113.46 4.4
7-048-430Q 168.00 1/8 - 5/8 2-1/4 3.90 5.3
WrenchPart
Number
RetailPrice
7-188-932K 12.00
Type 7657
Reducers NMTB 40 and 50for changing from NST taper to smaller NST taper
• NST shanks are produced according to AT3 specifications• Made of Alloy Forged Steel for a long durable service life• Taper seat T.I.R. <0.0004"• Hardened to RC 56-60 and ground to ensure maximum accuracy
NSTShank
PartNumber
RetailPrice
NSTSocket
Wtlbs
40 7-110-005 138.21 30 1.76
507-110-010 156.11 30 4.52
7-110-015 156.11 40 3.86
Type 1650
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 535
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
R8 Shank ToolingR8SH
ANKTO
OLING
536 R8 SHANK TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks with R8 Shanks
ColletType
ShankSize Part Number Retail
Price L D
ER 16
R8
7-171-1608 129.04 1.49 1.26
ER 20 7-171-2008 129.04 1.77 1.38
ER 25 7-171-2508 132.40 1.97 1.65
ER 32 7-171-3008 133.41 2.28 1.97
ER 40 7-171-4008 144.16 2.36 2.48
Type 7814
ER 16 Hex NutER 20 - 40 Round Nut
Draw Bar Thread 7/16"-20
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-188-816 22.20 7-188-9016 29.50
7-188-820 28.41 7-188-920 1.50
7-188-825 31.63 7-188-925 19.70
7-188-832 34.38 7-188-932 22.54
7-188-840 41.68 7-180-930 29.07
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-180-9100 67.36 7-180-930 29.07
TG Collet Chucks with R8 Shanks
ShankSize
PartNumber
RetailPrice Size L D
R8 7-161-110 150.75 TG100 3-1/8 2-1/2
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-193-818 33.81 7-193-918 17.38
Type 7819
Draw Bar Thread 7/16”-20
ShankSize
PartNumber
RetailPrice
ColletType L D
R8 7-167-020 165.08 DA180 2.78 1.54
DA180 Collet Chucks with R8 Shank
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 536
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
537
R8SH
ANKTO
OLIN
G
R8 Shank Tooling
Quality Products • Partnership • Industry Experts R8 SHANK TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
HoleDia Shank
Holder Set GageLengthPart Number Retail Price Part Number Retail Price
3/16
R8
7-160-005 62.38
7-160-1055 Pc Set3/16-3/4
343.93
1.300
1/4 7-160-007 62.54 1.300
3/8 7-160-010 63.36 1.300
1/2 7-160-015 63.43 1.300
5/8 7-160-020 66.01 1.496
3/4 7-160-025 72.95 2.362
7/8 7-160-030 90.537-160-1088 Pc Set
3/16-1-1/4628.11
2.736
1 7-160-035 100.15 3.228
1-1/4 7-160-040 100.83 3.228
1-1/2 7-160-045 112.42 3.740
End Mill Holders with R8 Shank• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Shell End Mill Pilot T.I.R. < 0.0004"• Each set is provided with a wooden case• Draw bar thread: 7/16"-20 8 Piece
Holder Set
Type 7820
Set ScrewPart Number Retail Price Thread
7-195-091 1.00 10-32 x 5/16
7-195-110 1.00 1-1/4-28 x 1/4
7-195-208 2.90 3/8-24 x 5/16
7-195-314 3.75 7/16-20 x 25/64
7-195-412 4.40 9/16-18 x 15/32
7-195-513 5.00 5/8-18 x 1/2
7-195-513 5.00 5/8-18 x 1/2
7-195-615 5.40 3/4-16 x 19/32
7-195-615 5.40 3/4-16 x 19/32
7-195-615 5.40 3/4-16 x 19/32
ArborDia
ArborPart Number
RetailPrice Shank Gage
Length
1/2 7-065-005 74.97
R8
1.024
3/4 7-065-010 76.81
.9451 7-065-015 83.16
1-1/4 7-065-020 94.38
1-1/2 7-065-025 128.55
Shell End Mill Arbors with R8 Shank• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Shell end mill pilot T.I.R. <0.0004"
Type 7550
• Each set is provided with a wooden case• Draw Bar Threads:
7/16" - 20
TaperSizeK
PartNumber
RetailPrice JT L I Wt
lbs
R8
7-052-801 30.21 JT1 5 0.27 0.87
7-052-802 30.34 JT2 5.18 0.25 0.90
7-052-803 31.13 JT3 5.57 0.30 1.04
7-052-806 30.60 JT6 5.27 0.22 1.03
7-052-804 31.55 JT4 5.95 0.23 1.03
7-052-805 34.33 JT5 6.16 0.23 1.1
7-052-833 30.53 JT33 5.35 0.30 0.94
Jacobs Taper Adapters• Draw bar threads: 7/16" - 20
Type 5355
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 537
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
R8 Shank ToolingR8SH
ANKTO
OLING
538 R8 SHANK TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Morse Taper Adapters R8 Shank for changing from R8 Shank to MT Socket
Shank PartNumber
RetailPrice
MTSocket
Draw BarThread
Wtlbs
R87-115-005 53.05 2
7/16 - 200.71
7-115-010 60.35 3 0.86
Type 1855
Slitting Saw Stub Mill Arbors with R8 Shank• Made of Alloy Forged Steel for long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Face is held perpendicular to center line within 0.0004"• Pilot diameter is sized for precision fit with cutter and is
keyed for positive drive
ShankDia
ArborDia d
PartNumber
RetailPrice D Wrench
Size S L
R8 1 7-070-005 147.60 1.50 1.252
R8 1-1/4 7-070-010 159.94 1.75 1.50
NutPart Number
RetailPrice
7-030-010R 35.74
7-030-015R 40.81
S
• Heavy duty locking LH nut and set of arborspacers are included
• Draw Bar Thread 7/16" x 20
Precision R8 Slitting Arbor• This versatile arbor offers flexibility in sawing operations• The spring loaded mechanism accepts saw
blades with hole diameters from 1/2" to 1"• Saw blades are firmly secured in position with a hex socket screw• Rust resistant black oxide finish• Arbors are provided with one hex wrench and one screw
Part Number7-120-010
ShankDiaD
PartNumber
RetailPrice OAL Hole
DiaHeadDia
R8 7-120-010 45.66 5-3/32 1/2, 5/8, 3/4, 7/8, 1 1.24
ScrewPart
Number
RetailPrice
Hex KeyPart
Number
RetailPrice
7-120-900 2.76 6-998-162 .84
R8 Annular Cutter Holders
• R8 shank• Holder shank allows different machines to drive cutter• Easily reaches out of the way places• Select adapter lengths reduce the number of machine set ups
Type PartNumber
RetailPrice
ShankSize
Cutter ShankSize
GageLength
HEN-5 7-982-500 86.89R8 3/4
1-3/4"
HEN-5-6 7-982-506 89.00 6"
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:11 AM Page 538
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
539
MORSE
TAPER
TOOLIN
G
Morse Taper Tooling
Quality Products • Partnership • Industry Experts MORSE TAPER TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks MT
ColletType
ShankSize
PartNumber
RetailPrice A D
ER 32 MT 3 7-171-3003 118.09 2.894 1.97
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-188-832 34.38 7-188-932 22.54
Type 7711
Draw Bar Thread MT3 3/8"-16
Shell End Mill Arbors with MT Shank• Made of alloy forged steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• Shell end mill pilot T.I.R. <0.0004"
ArborDia
Style “A”Tanged
Part Number
RetailPrice
MTShank
GageLength
3/4 7-050-010 106.76
4 1.1221 7-050-015 113.99
1-1/4 7-050-020 128.91
1-1/2 7-050-025 135.72
1 7-050-030 120.70
5
1.201
1-1/4 7-050-035 135.131.122
1-1/2 7-050-040 144.36Style “A”
Type 7411
• Each set is provided with a wooden case• Draw bar threads:
MT 4 1/2" - 13MT 5 5/8" - 11
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 539
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Morse Taper ToolingMORSE
TAPERTO
OLING
540 MORSE TAPER TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 7721
MTShank
HoleDia
Style “A” Style “B” GageLength
LPart Number RetailPrice Set Retail
Price Part Number RetailPrice
2
3/16 7-155-005 55.18
7-155-3025 Pc Set
295.23
7-150-005 47.71 2.008
1/4 7-155-007 56.19 7-150-007 48.41 2.008
3/8 7-155-010 52.86 7-150-010 50.76 2.008
1/2 7-155-015 56.98 7-150-015 54.59 3.465
5/8** 7-155-020 59.21 7-150-020 56.65 2.717
3
3/16 7-155-025 57.63
– –
7-150-025 48.73 2.008
1/4 7-155-027 58.19 7-150-027 48.79 2.008
3/8 7-155-030 49.09 7-150-030 50.76 2.008
1/2 7-155-035 52.13 7-150-035 53.44 2.126
5/8 7-155-040 59.08 7-150-040 60.12 3.976
3/4** 7-155-045 61.30 7-150-045 62.15 2.835
4
3/8 7-155-050 60.12
– –
7-150-050 59.79 2.067
1/2 7-155-055 59.99 7-150-055 61.00 2.185
5/8 7-155-060 64.61 7-150-060 65.29 2.264
3/4 7-155-065 70.52 7-150-065 70.89 2.420
7/8 7-155-070 83.19 – – 2.500
1** 7-155-075 92.29 7-150-075 107.24 3.169
5
3/8 7-155-080 73.76
7-155-3059 Pc Set
896.82
7-150-080 82.87 2.067
1/2 7-155-085 73.60 – – 2.185
5/8 7-155-090 74.68 – – 2.264
3/4 7-155-095 76.91 7-150-095 87.54 2.500
7/8 7-155-100 94.94 – – 2.420
1 7-155-105 102.44 7-150-105 112.09 2.736
1-1/4** 7-155-110 104.60 7-150-110 114.67 2.815
1-1/2** 7-155-115 118.80 7-150-115 128.33 3.500
2* 7-155-120 173.25 7-150-120 179.31 4.197
Type 7720
End Mill Holders with MT Shank• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• .0002" TIR or better to ensure minimal run-out• Each set is provided with a wooden case• 7/8" holders and larger are provided with two set screws
Style “A” Tanged Style “B” Draw Bar
• Draw Bar Threads:MT2 3/8"- 16MT3 3/8" - 16MT4 1/2" - 13MT5 5/8" - 11
x** Holders are only for single end mills
Set Screw
ThreadPart Number Retail
Price
7-195-091 1.00 10-32 x 5/16
7-195-110 1.00 1/4-28 x 1/4
7-195-208 2.90 3/8-24 x 5/16
7-195-314 3.75 7/16-20 x 25/64
7-195-412 4.40 9/16-18 x 15/32
7-195-091 1.00 10-32 x 5/16
7-195-110 1.00 1/4-28 x 1/4
7-195-208 2.90 3/8-24 x 5/16
7-195-314 3.75 7/16-20 x 25/64
7-195-412 4.40 9/16-18 x 15/32
7-195-513 5.00 5/8-18 x 1/2
7-195-208 2.90 3/8-24 x 5/16
7-195-314 3.75 7/16-20 x 25/64
7-195-412 4.40 9/16-18 x 15/32
7-195-513 5.00 5/8-18 x 1/2
7-195-513 5.00 5/8-18 x 1/2
7-195-615 5.40 3/4-16 x 19/32
7-195-208 2.90 3/8-24 x 5/16
7-195-314 3.75 7/16-20 x 25/64
7-195-412 4.40 9/16-18 x 15/32
7-195-513 5.00 5/8-18 x 1/2
7-195-513 5.00 5/8-18 x 1/2
7-195-615 5.40 3/4-16 x 19/32
7-195-615 5.40 3/4-16 x 19/32
7-195-615 5.40 3/4-16 x 19/32
7-195-820 14.00 1-14 x 53/64
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 540
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
541
MORSE
TAPER
TOOLIN
G
Morse Taper Tooling
Quality Products • Partnership • Industry Experts MORSE TAPER TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
MT Face Mill Holders• MT Taper is produced according to AT3 specifications• Made of Alloy Forged Steel for a long durable service life• Holders have four mounting holes with the thread 5/8-11
on a 4" bolt circle to hold 8" or larger face milling cutters• Shell end mill pilot T.I.R. <0.0004"• Holders have 1" drive keys
Shank HolderDia
PartNumber
RetailPrice
ArborLength
Wtlbs
MT 52 7-170-035 511.29
9.5710.8
2-1/2 7-170-045 509.27 11.2
MT 62 7-170-040 639.00
13.5818.1
2-1/2 7-170-050 636.94 18.6
Type 2842
• Draw Bar Threads:NST 40 5/8"- 1NST 50 1" - 8NST 60 1-1/4"- 7
SizeNumber
ArborDiaD
MT ShankTaper Length
EFits ShellReamer
OALL Wrench SizePart
NumberRetailPrice
TaperNumber
4 3/8 7-067-004 52.202
2-1/4 21/32 to 25/32 9 19/32
5 1/2 7-067-005 56.13 2-1/2 13/16 to 1-1/32 9-1/2 25/32
6 5/8 7-067-006 63.273
2-3/4 1-1/16 to 1-9/32 10 7/8
7 3/4 7-067-007 67.55 3 1-5/16 to 1-5/8 11 1-1/16
8 1 7-067-008 76.524
3-1/2 1-11/16 to 2 12 1-7/16
9 1-1/4 7-067-009 90.56 3-3/4 2-1/16 to 2-1/2 13 1-13/16
10 1-1/2 7-067-010 133.86
5
4 2-9/16 to 3 14 2-3/16
11 1-3/4 7-067-011 173.65 4-1/2 3-1/16 to 3-1/2 15 2-9/16
12 2 – – 5 3-9/16 to 4 16 3-1/8
SizeNumber
EjectCollar
Part Number
RetailPrice
ArborKey
Part Number
RetailPrice
4 7-068-904 19.86 7-068-804 1.84
5 7-068-905 20.62 – –
6 7-068-906 22.23 7-068-806 2.45
7 7-068-907 24.217-068-807 2.61
8 7-068-908 26.48
9 7-068-909 21.34 7-068-809 3.17
10 7-068-910 40.25 7-068-810 9.00
11 7-068-911 40.257-068-811 4.16
12 7-068-912 40.25
Type 5310
MT Shank: Type 5310
Shell Reamer Arbors• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• T.I.R. < 0.0004"• Arbors are provided with an ejecting nut, collar, and key
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 541
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Morse Taper ToolingMORSE
TAPERTO
OLING
542 MORSE TAPER TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
MTHoleK1
MTShankK
Hardened andGround
ThroughoutPart Number
RetailPrice
OALL
Wtlbs
1 2 7-450-005 22.54 3-5/8 0.22
13
7-450-010 25.54 3-7/8 0.48
2 7-450-015 23.53 4-3/8 0.42
1
4
7-450-020 30.67 4-7/8 1.1
2 7-450-025 28.76 5 0.99
3 7-450-030 29.91 5-1/2 0.88
1
5
7-450-035 44.69 6-1/8 3.19
2 7-450-040 42.20 6-1/8 3.34
3 7-450-045 47.19 6-1/8 2.99
4 7-450-050 54.21 6-3/4 2.09
46
7-450-055 104.75 8-5/8 7.92
5 7-450-060 104.75 8-5/8 5.61
Type 1751 Type 1762
Regular Length Extension Length
Taper Sleeves• Sleeves are made of Alloy Forged Steel for long durable service life• Sleeve Type 1751 is hardened to RC 56-60 and
ground throughout to ensure maximum accuracy
MTHoleK1
MTShankK
Soft,HardenedTang Only
Part Number
RetailPrice
OALL
LengthA
DiaD
Wtlbs
2 1 7-406-005 44.86 6-1/4 3-7/8 1-3/16 0.75
1
2
7-406-010 42.82 6-1/4 3-11/32 25/32 0.55
2 7-406-015 40.47 6-7/8 4 1-3/16 0.88
3 7-406-020 46.84 7-3/4 4-3/4 1-13/32 1.85
4 7-406-025 83.98 8-1/2 5-3/4 1-7/8 2.05
2
3
7-406-035 48.43 7-5/8 4 1-3/16 1.21
3 7-406-040 49.40 8-1/2 4-3/4 1-13/32 1.89
4 7-406-045 67.64 9-1/2 5-3/4 1-7/8 2.6
5 7-406-050 111.74 10-1/2 7-1/8 2-1/2 2.73
1
4
7-406-055 64.83 7-1/2 3-1/4 25/32 1.76
2 7-406-060 53.45 8-1/2 3-27/32 1-3/16 1.87
3 7-406-065 57.99 9-1/2 4-13/16 1-13/32 2.86
4 7-406-070 77.16 10-1/2 5-13/16 1-7/8 4.18
5 7-406-075 106.62 11-7/8 7-3/16 2-1/2 7.28
3
5
7-406-085 73.04 10-1/2 4-24/32 1-13/32 4.73
4 7-406-090 84.47 11-7/8 5-15/16 1-7/8 6.05
5 7-406-095 122.85 13-1/4 7-5/16 2-1/2 9.24
6 7-406-100 207.00 15-3/8 9-23/32 3-7/32 14.08
46
7-406-105 141.78 14 5-23/32 1-7/8 11.92
5 7-406-110 169.69 15-3/8 7-3/32 2-1/2 14.85
• Sleeve Type 1752 is soft with hardened tang only• Taper seat T.I.R. <0.0004"
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 542
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
543
MORSE
TAPER
TOOLIN
G
Morse Taper Tooling
Quality Products • Partnership • Industry Experts MORSE TAPER TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
MT Shank Annular Cutter Holders• MT shank• Holder shank allows different machines to drive cutter• Easily reaches out of the way places• Select adapter lengths reduce the number of machine set ups
Type PartNumber
RetailPrice
ShankSize
Cutter ShankSize
GageLength
HEN-3 7-981-300 75.25
MT2
3/4
2"
HEN-3-6 7-981-306 87.58 6"
HEN-3-12 7-981-312 103.00 12"
HEN-4 7-981-400 87.26
MT3
2"
HEN-4-6 7-981-406 99.21 6"
HEN-4-12 7-981-412 125.31 12"
HEN-8 7-981-800 99.521-1/4
2-3/4"
HEN-8-12 7-981-812 120.00 12"
Precision Drill Chuck Arbors
Morse TaperK Part Number Retail
PriceChuck Mount
K1 L I Wtlbs
1
7-052-101 11.78 1 3.30.2
0.22
7-052-102 12.51 2 3.5 0.15
7-052-103 14.20 3 4.0
0.3
0.26
7-052-106 13.06 63.7
0.19
7-052-133 12.54 33 0.18
2
7-052-201 13.78 1 4.0 0.4 0.27
7-052-202 13.85 2 4.2
0.3
0.31
7-052-203 15.12 3 4.4 0.42
7-052-206 13.98 64.2
0.39
7-052-233 13.85 33 0.38
3
7-052-302 16.72 2 5.0 0.4 0.63
7-052-303 17.12 3 5.2 0.3 0.82
7-052-304 20.16 4 5.7 0.4 1.03
7-052-305 24.28 5 6.0 0.5 1.40
7-052-306 16.89 65.0
0.4 0.66
7-052-333 16.69 33 0.3 0.72
4
7-052-403 22.94 3 6.3 0.5 1.43
7-052-404 23.47 4 6.70.4
1.72
7-052-405 26.44 5 6.9 2.10
7-052-406 22.55 66.1 0.5
1.35
7-052-433 22.42 33 1.33
5
7-052-503 36.20 3 7.6
0.5
3.36
7-052-504 37.28 4 8.0 3.67
7-052-505 38.03 5 8.2 4.05
7-052-506 35.54 6 7.33.30
7-052-533 35.61 33 7.4 0.6
Morse Taper to Jacobs Taper
Type 5362
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 543
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Morse Taper ToolingMORSE
TAPERTO
OLING
544 MORSE TAPER TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Morse Taper to Threaded Mount
MorseTaperK
PartNumber
RetailPrice
ThreadG L L1 L2 Wt
lbs
2
7-052-610 32.59 3/8-24 3.7 .6 .197 .26
7-052-613 31.26 1/2-20 4.0 .6 .472 .33
7-052-616 34.33 5/8-16 4.1 .7 .500 .37
Type 7470
Drill Drifts, Hardened and Zinc Plated
Size PartNumber
RetailPrice H Length
L
Fits MTSockets and
Sleeves Number
1 7-451-001 4.54.80
4.6 1
2 7-451-002 5.28 5.6 2
3 7-451-003 5.76 1.0 6.2 3
4 7-451-004 7.30 1.25 7.0 4-5-6
Set of 4 7-451-010 18.90 Set of 4 1-6
• Used for removing MT shanks from MT sleeves or spindles• Use drill drift size #1 for MT 1, size #2 for MT2, etc.• Fully drop forged
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 544
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
545
STRAIGHTSH
ANKTO
OLIN
G
Straight Shank Tooling
Quality Products • Partnership • Industry Experts STRAIGHT SHANK TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chucks with Cylindrical Shanks
Wrench
Part Number Retail Price
7-171-961 19.50
7-171-976 21.30
7-171-982 23.71
7-188-925 19.70
7-188-932 22.54
7-180-930 29.07
ColletType
Nut
Part Number Retail Price
ER 11 7-171-951 22.99
ER 16 7-171-966 25.64
ER 20 7-188-821 28.41
ER 25 7-188-825 31.63
ER 32 7-188-832 34.38
ER 40 7-188-840 41.68
ColletType
ShankSizeD
PartNumber
RetailPrice L D1
ER 111/2" 7-171-1105 109.80
6.2 .6305/8" 7-171-1106 80.14
ER 165/8" 7-171-1606 83.98 6.0
.8753/4" 7-171-1607 83.98 6.5
ER 203/4" 7-171-2007 93.57
5.5 1.3381" 7-171-2009 95.18
ER 253/4" 7-171-2303 124.26
6.5 1.6501" 7-171-2305 124.26
ER 32 1" 7-171-3001 118.09 3.75 1.97
ER 401" 7-171-4001 108.78 4.50
2.481-1/4" 7-171-4002 106.14 4.75
Type 7812
ER11 and ER16
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 545
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Straight Shank ToolingSTRAIGHTSH
ANKTO
OLING
546 STRAIGHT SHANK TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Straight Shank Stub Milling Machine Arbors with Weldon Shank• Made of Alloy Forged Steel for long durable service life• Hardened to RC 56-60 and ground to ensure
maximum accuracy• Face is held perpendicular to center line within 0.0004"
S
• Pilot diameter is sized for precision fit withcutter and is keyed for positive drive
• Heavy duty locking nut and three arbor spacers are included
ShankDiaD
ArborDiad
PartNumber
RetailPrice A
WrenchSizeS
L
1/2
1/2 7-072-005 90.62 .87 .75
1
5/8 7-072-010 96.71 1.00 .87
3/4 7-072-015 103.49 1.16 1.00
3/4
1/2 7-072-020 98.70 .87 .75
5/8 7-072-025 99.75 1.00 .87
3/4 7-072-030 100.93 1.16 1.00
7/8 7-072-035 102.60 1.371.12
1 7-072-040 106.07 1.50
1-1/4 7-072-045 117.16 1.75 1.50
Type 7020
ShankDiaD1
PartNumber
RetailPrice
ColletType
ClampingRange L D
3/4"7-167-003 142.56
DA200 1/8 - 25/645-1/2
.867-167-004 200.56 7-1/5
1"7-167-005 142.56
DA100 1/8 - 9/165-1/2
1.097-167-010 200.56 7-1/2
1-1/4"7-167-023 142.56
DA180 1/4 - 3/43
1.547-167-025 142.56 5-1/2
Nut Wrench
Part Number Retail Price Part Number Retail Price
7-193-805S 35.68 7-193-905S 15.85
7-193-810 35.68 7-193-910 19.80
7-193-818 33.81 7-193-918 17.38
DA Straight Shank Collet Extensions
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 546
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
547
STRAIGHTSH
ANKTO
OLIN
G
Straight Shank Tooling
Quality Products • Partnership • Industry Experts STRAIGHT SHANK TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Slitting and Slotting Saw ArborsHardened and Precisely Ground
• Rigid arbors with extended length reach areas that standard short arbors cannot• Each arbor is ground for precision within 0.002" or 0.0004" T.I.R. (see drawing and table)• Super low profile cups allow cutter to get lower and closer to working area• Plug style cup gives extra support and rigidity when working with larger diameter saws• Sets are supplied in a wooden stand
0.0004"T.I.R.
ShankDiaD
Arbor .002"Part
Number
RetailPrice
Arbor .0004"Part
Number
RetailPrice
HoleSized
d1 L
.500
7-123-005 24.88 7-123-305 37.30 .250 .500 2.70
7-123-010 30.41 7-123-310 51.40 .375 .625 2.88
7-123-015 33.18 7-123-315 52.50 .500 .750 3.07
Set of 3 Arbors.250 - .500 7-123-050 88.50 7-123-350 141.00 –
.750
7-123-105 35.94 7-123-405 96.00 .625 1.00 3.53
7-123-110 38.71 7-123-410 110.80 1.000 1.50 3.78
7-123-115 44.25 7-123-415 116.70 1.250 1.75 4.03
Set of 3 Arbors.625 - 1.250 7-123-150 119.00 7-123-450 324.00 –
ShankDiaD
Arbor .002"Part
Number
Arbor .0004"Part
Number
Arbor ScrewPart
Number
RetailPrice
Hex KeyPart
Number
RetailPrice
.500
7-123-005 7-123-305 7-123-905 2.76 6-999-583 .54
7-123-010 7-123-310 7-123-910 4.42 6-999-584 .66
7-123-015 7-123-315 7-123-915 5.53 6-999-585 .81
.750
7-123-105 7-123-405 7-123-925 4.42 6-999-585 .81
7-123-110 7-123-410 7-123-930 5.536-999-586 .99
7-123-115 7-123-415 7-123-935 5.53
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 547
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Straight Shank ToolingSTRAIGHTSH
ANKTO
OLING
548 STRAIGHT SHANK TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Straight Shank Shell Mill Arbors
ShankDiaD
PartNumber
RetailPrice d A l D1 L
3/4 7-064-005 92.09 .750 .703
.672
1.750 2.00
17-064-010 103.78 1.000 .714 2.125
2.287-064-015 114.45 1.250 .845 2.500
1-1/47-064-025 94.22 .750 1.000
.6901.770 2.28
7-064-030 104.95 1.000 2.280
ShankDiaD
PartNumber
Key
Part Number Retail Price B
3/4 7-064-005 7-080-110 11.03 5/16
17-064-010 7-080-115 11.43 3/8
7-064-015 7-080-120 11.91 1/2
1-1/47-064-025 7-080-110 11.03 5/16
7-064-030 7-080-115 11.43 3/8
Arbor Screw
Part Number Retail Price Thread
7-080-010 8.93 3/8-24
7-080-015 10.08 1/2-20
7-080-020 12.01 5/8-18
7-080-010 8.93 3/8-24
7-080-015 10.08 1/2-20
Key Screw
Part Number Retail Price
7-080-155 1.80
7-080-160 1.80
7-080-160 1.80
7-080-155 1.80
7-080-160 1.80
Parallel float +/- 0.002"
ShankSizeD
ColletSize L L1 D1 D2 Holder
Part NumberNut
Part NumberWrench
Part Number
1-1/4"ER 25 7.35 4 1.650 2.284
7-162-2557-188-825 7-188-925
1" 7-162-250
HolderPart Number
RetailPrice
NutPart Number
RetailPrice
WrenchPart Number
RetailPrice
7-162-255 324.857-188-825 31.63 7-188-925 19.70
7-162-250 202.19
Floating Reamer Holders• Through spindle coolant capability
Type 5275
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 548
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
549
STRAIGHTSH
ANKTO
OLIN
G
Straight Shank Tooling
Quality Products • Partnership • Industry Experts STRAIGHT SHANK TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Shell Reamer Arbors• Made of Alloy Forged Steel for a long durable service life• Hardened to RC 56-60 and ground to ensure maximum accuracy• T.I.R. < 0.0004"• Arbors are provided with an ejecting nut, collar, and key
SizeNumber
ArborDiaD
Straight ShankTaper Length
EFits ShellReamer
OALL Wrench SizePart
NumberRetailPrice
Shankd
4 3/8 7-068-004 42.51 1/2 2-1/4 21/32 to 25/32 9 19/32
5 1/2 7-068-005 47.23 5/8 2-1/2 13/16 to 1-1/32 9-1/2 25/32
6 5/8 7-068-006 52.76 3/4 2-3/4 1-1/16 to 1-9/32 10 7/8
7 3/4 7-068-007 57.05 7/8 3 1-5/16 to 1-5/8 11 1-1/16
8 1 7-068-008 63.66 1-1/8 3-1/2 1-11/16 to 2 12 1-7/16
9 1-1/4 7-068-009 75.11 1-3/8 3-3/4 2-1/16 to 2-1/2 13 1-13/16
10 1-1/2 7-068-010 121.98 1-5/8 4 2-9/16 to 3 14 2-3/16
11 1-3/4 7-068-011 163.67 2 4-1/2 3-1/16 to 3-1/2 15 2-9/16
12 2 7-068-012 201.67 2-1/8 5 3-9/16 to 4 16 3-1/8
SizeNumber
Eject Collar Arbor Key
Part Number Retail Price Part Number Retail Price
4 7-068-904 19.86 7-068-804 1.84
5 7-068-905 20.62 – –
6 7-068-906 22.23 7-068-806 2.45
7 7-068-907 24.217-068-807 2.61
8 7-068-908 26.48
9 7-068-909 21.34 7-068-809 3.17
10 7-068-910 40.25 7-068-810 9.00
11 7-068-911 40.257-068-811 4.16
12 7-068-912 40.25
Type 5312
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 549
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Straight Shank ToolingSTRAIGHTSH
ANKTO
OLING
550 STRAIGHT SHANK TOOLING Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Type 1875
Solid Sockets with MT Hole• Sockets are made of Alloy Forged Steel for a long durable service life• Morse taper seat T.I.R. <0.0004"• Hardened to RC 56-60 and ground to ensure maximum accuracy
SocketNumber
PartNumber
RetailPrice
OALL
MTHole
ODD
1 7-400-005 37.223-1/2 1
12 7-400-010 39.67 1-1/43 7-400-015 45.35 1-1/24 7-400-020 51.19
4 2
15 7-400-025 51.19 1-1/46 7-400-030 51.19 1-1/27 7-400-035 51.19 1-3/48 7-400-040 59.71 29 7-400-045 55.59
4-3/4 3
1-1/410 7-400-050 55.59 1-1/211 7-400-055 55.59 1-3/412 7-400-060 63.21 213 7-400-065 69.48
6 41-1/2
14 7-400-070 69.48 1-3/415 7-400-075 78.82 216 7-400-080 117.04
7-3/8 52-1/4
17 7-400-085 117.04 2-1/218 7-400-090 209.19
10-1/8 63-1/4
19 7-400-095 213.68 3-1/2
Jacobs Taper Adapters
Straight to Jacobs TaperStraight Shank Part
NumberRetailPrice L Jacobs Taper
K1WtlbsD I
1/2 2-1/2
7-052-700 9.91 3.1 0 0.15
7-052-701 10.04 3.3 1 0.16
7-052-702 10.99 3.5 2 0.20
7-052-703 12.93 3.9 3 0.32
7-052-7033 11.03 3.7 33 0.23
7-052-706 11.62 3.7 6 0.25
5/8 2-1/2
7-052-721 14.17 3.3 1 0.25
7-052-722 14.20 3.5 2 0.28
7-052-723 16.49 3.9 3 0.40
7-052-7233 14.20 3.5 33 0.30
7-052-726 15.02 3.6 6 0.32
3/4 3
7-052-742 12.51 4.0 2 0.44
7-052-743 13.68 4.3 3 0.55
7-052-7433 12.54 4.1 33 0.47
7-052-744 17.12 4.8 4 0.84
7-052-746 12.67 4.1 6 0.48
1 3
7-052-762 17.84 4.1 2 0.75
7-052-763 18.30 4.3 3 0.86
7-052-7633 17.84 4.2 33 0.77
7-052-764 20.46 4.8 4 1.13
7-052-766 18.04 4.2 6 0.80
Type 5353
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 550
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
551
STRAIGHTSH
ANKTO
OLIN
G
Straight Shank Tooling
Quality Products • Partnership • Industry Experts STRAIGHT SHANK TOOLING
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Straight Shank Annular Cutter Holders
Straight Shank – 3 Flats
Type PartNumber
RetailPrice
ShankSize
Cutter ShankSize
GageLength
HEN-1 7-980-100 65.21 1/2
3/4
2-1/8"
HEN-2 7-980-200 65.21
3/4
2"
HEN-2-6 7-980-206 70.06 3"
HEN-2-12 7-980-212 88.27 12"
HEN 6-12 7-980-612 92.001-1/4 12"
Spare ejecting spring 7-980-900H 4.20
Straight Shank – 2 Flats
Type PartNumber
RetailPrice
ShankSize
Cutter ShankSize
GageLength
HEN-9-6 7-983-906 76.15 3/4 3/4 6"
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 551
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
552 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
NominalSizeinches
ER 11Part Number
RetailPrice
ER 16Part Number
RetailPrice
ER 20Part Number
RetailPrice
ER 25Part Number
RetailPrice
1/32 7-171-112* 20.40 7-171-162 18.40 – – – –
1/16 7-171-113* 18.40 7-171-1621 13.40 7-171-203 14.90 7-171-2333 15.20
3/32 7-171-114* 18.40 7-171-1623 13.40 7-171-204 14.90 7-171-2335 15.20
1/8 7-171-116* 18.40 7-171-163* 13.40 7-171-205* 14.90 7-171-2337* 15.20
5/32 – – 7-171-1630 13.40 7-171-206 14.90 7-171-2338 15.20
3/16 7-171-118* 18.40 7-171-164* 13.40 7-171-207* 14.90 7-171-234* 15.20
7/32 7-171-120* 18.40 7-171-165* 13.40 7-171-209* 14.90 7-171-236* 15.20
1/4 7-171-122* 18.40 7-171-166* 13.40 7-171-211* 14.90 7-171-238* 15.20
9/32 – – 7-171-1663 13.40 7-171-212 14.90 7-171-240 15.20
5/16 – – 7-171-167* 13.40 7-171-213* 14.90 7-171-242* 15.20
11/32 – – 7-171-168* 13.40 7-171-215* 14.90 7-171-244* 15.20
3/8 – – 7-171-169* 13.40 7-171-217* 14.90 7-171-246* 15.20
13/32 – – – – 7-171-219* 14.90 7-171-248* 15.20
7/16 – – – – 7-171-221* 14.90 7-171-250* 15.20
15/32 – – – – 7-171-222 14.90 7-171-252 15.20
1/2 – – – – 7-171-223* 14.90 7-171-254* 15.20
17/32 – – – – – – 7-171-256* 15.20
9/16 – – – – – – 7-171-258* 15.20
19/32 – – – – – – 7-171-260 15.20
5/8 – – – – – – 7-171-262 15.20
Collet Sets7 Pc. Set 7 Pc. Set 10 Pc. Set 12 Pc. Set
7-171-125 136.50 7-171-195 124.50 7-171-225 213.50 7-171-295 215.50
ER Spring Collets and Collet Sets• Concentricity guaranteed to 0.0004"• Wide holding range of each collet requires
fewer collets and changes• ER Collets collapse approximately 1/32"
while maintaining full accuracy• Unique self-releasing system eliminates sticking• ER Mini-Collet Chucks allow for machining in
tight locations with reduced outside nose diameter
Style D L
ER 11 – –ER 16 0.669 1.062ER 20 0.826 1.220ER 25 1.024 1.378ER 32 1.299 1.574ER 40 1.614 1.811
* Indicates sizescontained in set
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 552
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
553
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Spring Collets and Collet Sets• Concentricity guaranteed to 0.0004"• Wide holding range of each collet requires
fewer collets and changes• ER Collets collapse approximately 1/32"
while maintaining full accuracy• Unique self-releasing system eliminates sticking• ER Mini-Collet Chucks allow for machining in
tight locations with reduced outside nose diameter
Style D L
ER 11 – –ER 16 0.669 1.062ER 20 0.826 1.220ER 25 1.024 1.378ER 32 1.299 1.574ER 40 1.614 1.811
* Indicates sizescontained in set
NominalSizeinches
ER 32Part Number
RetailPrice
ER 40Part Number
RetailPrice
ER 50Part Number
RetailPrice
3/32 7-171-328 17.80 – – – –
1/8 7-171-330* 17.80 7-171-430* 21.40 – –
5/32 7-171-332 17.80 7-171-432 21.40 – –
3/16 7-171-334* 17.80 7-171-434* 21.40 – –
7/32 7-171-336 17.80 7-171-436 21.40 – –
1/4 7-171-338* 17.80 7-171-438* 21.40 – –
9/32 7-171-339 17.80 7-171-440 21.40 – –
5/16 7-171-340* 17.80 7-171-442* 21.40 – –
11/32 7-171-344 17.80 7-171-444 21.40 – –
3/8 7-171-346* 17.80 7-171-446* 21.40 – –
13/32 7-171-348 17.80 7-171-448 21.40 – –
7/16 7-171-350* 17.80 7-171-450* 21.40 – –
15/32 7-171-352 17.80 7-171-452 21.40 – –
1/2 7-171-354* 17.80 7-171-454* 21.40 7-171-4959 60.52
17/32 7-171-356 17.80 7-171-456 21.40 – –
9/16 7-171-358* 17.80 7-171-458* 21.40 – –
19/32 7-171-360 17.80 7-171-460 21.40 – –
5/8 7-171-362* 17.80 7-171-462* 21.40 7-171-4967 60.52
21/32 7-171-364 17.80 7-171-464 21.40 – –
11/16 7-171-366* 17.80 7-171-466* 21.40 – –
23/32 7-171-368 17.80 7-171-468 21.40 – –
3/4 7-171-370* 17.80 7-171-470* 21.40 7-171-4975 60.52
25/32 – – 7-171-472 21.40 – –
13/16 – – 7-171-474* 21.40 – –
27/32 – – 7-171-476 21.40 – –
7/8 – – 7-171-478* 21.40 – –
29/32 – – 7-171-480 21.40 – –
15/16 – – 7-171-482* 21.40 – –
31/32 – – 7-171-484 21.40 – –
1 – – 7-171-486* 21.40 7-171-4989 60.52
1-1/4 – – – – 7-171-4995 60.52
Collet Sets11 Pc. Set – 15 Pc. Set – – –
7-171-395 228.50 7-171-495 325.50 – –
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 553
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
554 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Spring Collets andCollet Sets, Metric Sizes
NominalSize
ClampingRange
ClampingRange ER 11
Part NumberRetailPrice
ER 16Part Number
RetailPrice
ER 20Part Number
RetailPrice
mm inches
1 1-0.5 .019-.039 7-171-511 18.40 7-171-501 18.10 – –
2 2-1 .039-.078 7-171-513 18.40 7-171-502 15.52 7-171-602* 15.90
3 3-2 .078-.118 7-171-515 18.40 7-171-503 15.52 7-171-603 15.90
4 4-3 .118-.157 7-171-517 18.40 7-171-504 15.52 7-171-604 15.90
5 5-4 .157-.196 7-171-519 18.40 7-171-505 15.52 7-171-605 15.90
6 6-5 .196-.236 7-171-521 18.40 7-171-506 15.52 7-171-606 15.90
7 7-6 .236-.275 7-171-523 18.40 7-171-507 15.52 7-171-607 15.90
8 8-7 .275-.314 – – 7-171-508 15.52 7-171-608 15.90
9 9-8 .314-.354 – – 7-171-509 15.52 7-171-609 15.90
10 10-9 .354-.393 – – 7-171-510 15.52 7-171-610 15.90
11 11-10 .393-.433 – – – – 7-171-611 15.90
12 12-11 .433-.472 – – – – 7-171-612 15.90
13 13-12 .472-.511 – – – – 7-171-613 15.90
Collet Sets7 pc set 10 pc set 11 pc set
7-171-525 130.00 7-171-595 195.50 7-171-695 207.00
*Size not included in set
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 554
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
555
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Spring Collets andCollet Sets, Metric Sizes
NominalSize
ClampingRange
ClampingRange ER 25
Part NumberRetailPrice
ER 32Part Number
RetailPrice
ER 40Part Number
RetailPrice
mm inches2 2-1 .039-.078 7-171-702 16.30 – – – –
3 3-2 .078-.118 7-171-703 16.30 7-171-803 17.80 – –
4 4-3 .118-.157 7-171-704 16.30 7-171-804 17.80 7-171-904 21.40
5 5-4 .157-.196 7-171-705 16.30 7-171-805 17.80 7-171-905 21.40
6 6-5 .196-.236 7-171-706 16.30 7-171-806 17.80 7-171-906 21.40
7 7-6 .236-.275 7-171-707 16.30 7-171-807 17.80 7-171-907 21.40
8 8-7 .275-.314 7-171-708 16.30 7-171-808 17.80 7-171-908 21.40
9 9-8 .314-.354 7-171-709 16.30 7-171-809 17.80 7-171-909 21.40
10 10-9 .354-.393 7-171-710 16.30 7-171-810 17.80 7-171-910 21.40
11 11-10 .393-.433 7-171-711 16.30 7-171-811 17.80 7-171-911 21.40
12 12-11 .433-.472 7-171-712 16.30 7-171-812 17.80 7-171-912 21.40
13 13-12 .472-.511 7-171-713 16.30 7-171-813 17.80 7-171-913 21.40
14 14-13 .511-.551 7-171-714 16.30 7-171-814 17.80 7-171-914 21.40
15 15-14 .551-.590 7-171-715 16.30 7-171-815 17.80 7-171-915 21.40
16 16-15 .590-.629 – – 7-171-816 17.80 7-171-916 21.40
17 17-16 .629-.669 – – 7-171-817 17.80 7-171-917 21.40
18 18-17 .669-.708 – – 7-171-818 17.80 7-171-918 21.40
19 19-18 .708-.748 – – 7-171-819 17.80 7-171-919 21.40
20 20-19 .748-.787 – – 7-171-820 17.80 7-171-920 21.40
21 21-20 .787-.826 – – – – 7-171-921 21.40
22 22-21 .826-.866 – – – – 7-171-922 21.40
23 23-22 .866-.905 – – – – 7-171-923 21.40
24 24-23 .905-.944 – – – – 7-171-924 21.40
25 25-24 .944-.984 – – – – 7-171-925 21.40
26 26-25 .984-1.023 – – – – 7-171-926 21.40
Collet Sets14 pc set 18 pc set 23 pc set
7-171-795 270.50 7-171-895 376.00 7-171-935 540.00
Draw Bar Thread 7/16"-20
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:12 AM Page 555
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
556 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TG Precision Single Angle Collets• Concentricity guaranteed to 0.0004"• TG collets collapse approximately 1/64"• Completely interchangeable with all leading brands• Hardened and ground to ensure maximum accuracy• Sets provided in sturdy wooden case
Collet must beinserted into thenose piece beforeit is put into thechuck
Fractional TG75 TG100
inches Part Number Retail Price Part Number Retail Price
3/32 7-166-108 23.91 7-166-308 31.51
7/64 7-166-110 23.91 7-166-310 31.51
1/8 7-166-112 23.91 7-166-312 24.74
9/64 7-166-114 23.91 7-166-314 24.74
5/32 7-166-116 23.91 7-166-316 24.74
11/64 7-166-118 23.91 7-166-318 24.74
3/16 7-166-120 23.91 7-166-320 24.74
13/64 7-166-122 23.91 7-166-322 24.74
7/32 7-166-124 23.91 7-166-324 24.74
15/64 7-166-126 23.91 7-166-326 24.74
1/4 7-166-128 23.91 7-166-328 24.74
17/64 7-166-130 23.91 7-166-330 24.74
9/32 7-166-132 23.91 7-166-332 24.74
19/64 7-166-134 23.91 7-166-334 24.74
5/16 7-166-136 23.91 7-166-336 24.74
21/64 7-166-138 23.91 7-166-338 24.74
11/32 7-166-140 23.91 7-166-340 24.74
23/64 7-166-142 23.91 7-166-342 24.74
3/8 7-166-144 23.91 7-166-344 24.74
25/64 7-166-146 23.91 7-166-346 24.74
13/32 7-166-148 23.91 7-166-348 24.74
27/64 7-166-150 23.91 7-166-350 24.74
7/16 7-166-152 23.91 7-166-352 24.74
29/64 7-166-154 23.91 7-166-354 24.74
15/32 7-166-156 23.91 7-166-356 24.74
31/64 7-166-158 23.91 7-166-358 24.74
ColletType
DiameterD
LengthL
ClampingRange
TG75 1.062 1.844 3/32 to 3/4
TG100 1.379 2.375 3/32 to 1
TG150 2.001 3.000 1/2 to 1-1/2
TG-100 Collet ExtractorsPart Number 7-166-8001
Fractional TG75 TG100
inches Part Number Retail Price Part Number Retail Price
1/2 7-166-160 23.91 7-166-360 24.74
33/64 7-166-162 23.91 7-166-362 24.74
17/32 7-166-164 23.91 7-166-364 24.74
35/64 7-166-166 23.91 7-166-366 24.74
9/16 7-166-168 23.91 7-166-368 24.74
37/64 7-166-170 23.91 7-166-370 24.74
19/32 7-166-172 23.91 7-166-372 24.74
39/64 7-166-174 23.91 7-166-374 24.74
5/8 7-166-176 23.91 7-166-376 24.74
41/64 7-166-178 23.91 7-166-378 24.74
21/32 7-166-180 23.91 7-166-380 24.74
43/64 7-166-182 23.91 7-166-382 21.20
11/16 7-166-184 23.91 7-166-384 24.74
45/64 7-166-186 23.91 7-166-386 24.74
23/32 7-166-188 23.91 7-166-388 24.74
47/64 7-166-190 23.91 7-166-390 24.74
3/4 7-166-192 23.91 7-166-392 24.74
49/64 – – 7-166-394 24.74
25/32 – – 7-166-396 24.74
51/64 – – 7-166-398 24.74
13/16 – – 7-166-400 24.74
53/64 – – 7-166-402 21.20
27/32 – – 7-166-404 21.20
7/8 – – 7-166-408 24.74
57/64 – – 7-166-410 24.74
29/32 – – 7-166-412 24.74
59/64 – – 7-166-414 21.20
15/16 – – 7-166-416 24.74
61/64 – – 7-166-418 24.74
31/32 – – 7-166-420 24.74
63/64 – – 7-166-422 24.74
1 – – 7-166-424 24.74
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 556
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
557
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TG Precision Single Angle Collets• Concentricity guaranteed to 0.0004"• TG collets collapse approximately 1/64"• Completely interchangeable with all leading brands• Hardened and ground to ensure maximum accuracy• Sets provided in sturdy wooden case
Collet must beinserted into thenose piece beforeit is put intothe chuck
Fractional TG150
inches Part Number Retail Price
1-1/64 7-166-626 39.95
1-1/32 7-166-628 39.95
1-3/64 7-166-630 39.95
1-1/16 7-166-632 39.95
1-5/64 7-166-634 39.95
1-1/8 7-166-640 39.95
1-9/64 7-166-642 39.95
1-5/32 7-166-644 39.95
1-11/64 7-166-646 39.95
1-13/64 7-166-650 39.95
1-7/32 7-166-652 39.95
1-15/64 7-166-654 39.95
1-1/4 7-166-656 39.95
1-17/16 7-166-658 39.95
1-9/32 7-166-660 39.95
1-19/64 7-166-662 39.95
1-5/16 7-166-664 39.95
1-21/64 7-166-666 39.95
1-11/32 7-166-668 39.95
1-23/64 7-166-670 39.95
1-3/8 7-166-672 39.95
1-25/64 7-166-674 39.95
1-13/32 7-166-676 39.95
1-27/64 7-166-678 39.95
1-29/64 7-166-682 39.95
1-15/32 7-166-684 39.95
1-31/64 7-166-686 39.95
1-1/2 7-166-688 39.95
TG Collet Sets
Fractional TG150
inches Part Number Retail Price
1/2 7-166-560 39.95
33/64 7-166-562 39.95
17/32 7-166-564 39.95
35/64 7-166-566 39.95
9/16 7-166-568 39.95
37/64 7-166-570 39.95
19/32 7-166-572 39.95
39/64 7-166-574 39.95
5/8 7-166-576 39.95
41/64 7-166-578 39.95
21/32 7-166-580 39.95
43/64 7-166-582 39.95
11/16 7-166-584 39.95
45/64 7-166-586 39.95
23/32 7-166-588 39.95
47/64 7-166-590 39.95
3/4 7-166-592 39.95
49/64 7-166-594 39.95
25/32 7-166-596 39.95
51/64 7-166-598 39.95
13/16 7-166-600 39.95
53/64 7-166-602 39.95
27/32 7-166-604 39.95
55/64 7-166-606 39.95
7/8 7-166-608 39.95
57/64 7-166-610 39.95
29/32 7-166-612 39.95
59/64 7-166-614 39.95
15/16 7-166-616 39.95
61/64 7-166-618 39.95
31/32 7-166-620 39.95
63/64 7-166-622 39.95
1 7-166-624 39.95
Collet Type Part Number Retail Price Number of Pieces Collet Sizes
TG757-166-195 265.50 11 1/8 -3/4 x 16ths
7-166-197 1,068.75 43 3/32 -3/4 x 64ths
TG1007-166-515 405.00 15 1/8 -1 x 16ths
7-166-530 787.50 30 3/32 -1 x 32nds
TG150
7-166-693 714.38 17 1/2 -1-1/2 x 16ths
7-166-695 1,361.25 33 1/2 -1-1/2 x 32nds
7-166-698 2,756.25 65 1/2 -1-1/2 x 64ths
TG-100 Collet ExtractorsPart Number 7-166-8001
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 557
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
558 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
DA180, DA100, DA200, and DA300 Collets
ColletSeries
PartNumber Retail Price No of
Pieces Range
DA 3007-167-340 89.80 5 1/8 - 1/4 by 32nds
7-167-344 168.50 9 1/8 - 1/4 by 64ths
DA 2007-167-270 142.03 9 1/8 - 3/8 by 32nds
7-167-275 259.87 17 1/8 - 3/8 by 64ths
DA 1807-167-192 345.94 17 1/4 - 3/4 by 32nds
7-167-194 660.94 33 1/4 - 3/4 by 64ths
DA 1007-167-070 185.86 11 1/4 - 9/16 by 32nds
7-167-075 354.82 21 1/4 - 9/16 by 1/64"
DA Fractional Size Sets
SizeDA300 DA200
Part Number Retail Price Part Number Retail Price
3/64 7-167-324 19.30 7-167-234 19.30
1/16 7-167-325 19.30 7-167-235 19.30
5/64 7-167-326 19.30 7-167-236 19.30
3/32 7-167-327 19.30 7-167-237 19.30
7/64 7-167-328 19.30 7-167-238 19.30
1/8 7-167-330 17.40 7-167-240 15.26
9/64 7-167-331 17.40 7-167-241 15.26
5/32 7-167-332 17.40 7-167-242 15.26
11/64 7-167-333 17.40 7-167-243 15.26
3/16 7-167-334 17.40 7-167-244 15.26
13/64 7-167-335 17.40 7-167-245 15.26
7/32 7-167-336 17.40 7-167-246 15.26
15/64 7-167-337 17.40 7-167-247 15.26
1/4 7-167-338 17.40 7-167-248 15.26
17/64 – – 7-167-249 15.26
9/32 – – 7-167-250 15.26
19/64 – – 7-167-251 15.26
5/16 – – 7-167-252 15.26
21/64 – – 7-167-253 15.26
11/32 – – 7-167-254 15.26
23/64 – – 7-167-255 15.26
3/8 – – 7-167-256 15.26
25/64 – – 7-167-257 15.26
Fractional Sizes
ColletType
ColletRange
BodyDiaD
OALL
DA300 1/8 - 1/4 .375 1.000
DA200 1/8 - 25/64 .531 1.188
DA100 1/8 - 9/16 .769 1.438
DA180 1/4 - 3/4 0.873-1.035 1.637
Dimensions
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 558
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
559
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
DA180, DA100, DA200, and DA300 Collets
SizeDA180 DA100
Part Number Retail Price Part Number Retail Price
3/64 – – 7-167-030 14.64
1/16 7-167-106 19.74 7-167-031 21.30
5/64 7-167-107 19.74 7-167-032 21.30
3/32 7-167-108 19.74 7-167-033 21.30
7/64 7-167-109 19.74 7-167-034 21.30
1/8 7-167-110 18.62 7-167-035 16.90
9/64 7-167-111 18.62 7-167-036 16.90
5/32 7-167-112 18.62 7-167-037 16.90
11/64 7-167-113 18.62 7-167-038 16.90
3/16 7-167-114 18.62 7-167-039 16.90
13/64 7-167-115 18.62 7-167-040 16.90
7/32 7-167-116 18.62 7-167-041 16.90
15/64 7-167-117 18.62 7-167-042 16.90
1/4 7-167-118 18.62 7-167-043 16.90
17/64 7-167-119 18.62 7-167-044 16.90
9/32 7-167-120 18.62 7-167-045 16.90
19/64 7-167-121 18.62 7-167-046 16.90
5/16 7-167-122 18.62 7-167-047 16.90
21/64 7-167-123 18.62 7-167-048 16.90
11/32 7-167-124 18.62 7-167-049 17.40
23/64 7-167-125 18.62 7-167-050 16.90
3/8 7-167-126 18.62 7-167-051 16.90
25/64 7-167-127 18.62 7-167-052 16.90
SizeDA180 DA100
Part Number Retail Price Part Number Retail Price
13/32 7-167-128 18.62 7-167-053 16.90
27/64 7-167-129 18.62 7-167-054 16.90
7/16 7-167-130 18.62 7-167-055 16.90
29/64 7-167-131 18.62 7-167-056 16.90
15/32 7-167-132 18.62 7-167-057 16.90
31/64 7-167-133 18.62 7-167-058 16.90
1/2 7-167-134 18.62 7-167-059 16.90
33/64 7-167-135 18.62 – –
17/32 7-167-136 18.62 7-167-061 16.90
35/64 7-167-137 18.62 – –
9/16 7-167-138 18.62 7-167-063 16.90
37/64 7-167-139 18.62 – –
19/32 7-167-140 18.62 – –
39/64 7-167-141 18.62 – –
5/8 7-167-142 18.62 – –
41/64 7-167-143 24.00 – –
21/32 7-167-144 18.62 – –
11/16 7-167-146 18.62 – –
23/32 7-167-148 18.62 – –
47/64 7-167-149 18.62 – –
3/4 7-167-150 18.62 – –
Fractional Sizes
Size DA180Part Number
RetailPrice
ColletRange
3 mm 7-167-503 24.00 3-2
6 mm 7-167-506 24.00 6-5
7 mm 7-167-507 24.00 7-6
8 mm 7-167-508 24.00 8-7
10 mm 7-167-510 24.00 10-9
11 mm 7-167-511 24.00 11-10
12 mm 7-167-512 24.00 12-11
14 mm 7-167-514 24.00 14-13
Metric Sizes
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 559
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
560 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
R8 Precision Round Collets• Concentricity guaranteed to 0.0004"
Fractional Sizes
Size PartNumber
RetailPrice Size Part
NumberRetailPrice
2 mm 7-169-602 14.06 12 mm 7-169-612 12.66
3 mm 7-169-603 12.66 13 mm 7-169-613 12.66
4 mm 7-169-604 12.66 14 mm 7-169-614 12.66
5 mm 7-169-605 12.66 15 mm 7-169-615 12.66
6 mm 7-169-606 12.66 16 mm 7-169-616 12.66
7 mm 7-169-607 12.66 17 mm 7-169-617 12.66
8 mm 7-169-608 12.66 18 mm 7-169-618 12.66
9 mm 7-169-609 12.66 19 mm 7-169-619 12.66
10 mm 7-169-610 12.66 20 mm 7-169-620 12.66
11 mm 7-169-611 12.66 – – –
19 Piece Collet Set2 mm - 20 mm by 1 mm
7-169-669 281.25
Size PartNumber
RetailPrice Size Part
NumberRetailPrice Size Part
NumberRetailPrice
1/16 7-169-005 24.00 3/8 7-169-037 12.66 11/16 7-169-068 12.66
3/32 7-169-010 14.06 13/32 7-169-040 12.66 23/32 7-169-071 12.66
1/8 7-169-012 12.66 7/16 7-169-043 12.66 3/4 7-169-075 12.66
5/32 7-169-015 12.66 15/32 7-169-046 12.66 25/32 7-169-078 24.00
3/16 7-169-018 12.66 1/2 7-169-050 12.66 13/16 7-169-081 24.00
7/32 7-169-021 12.66 17/32 7-169-053 12.66 27/32 7-169-084 24.00
1/4 7-169-025 12.66 9/16 7-169-056 12.66 7/8 7-169-087 24.00
9/32 7-169-028 12.66 19/32 7-169-059 12.66 1 7-169-099 24.00
5/16 7-169-031 12.66 5/8 7-169-062 12.66 – – –
11/32 7-169-034 12.66 21/32 7-169-065 12.66 – – –
13 Piece Collet Set 1/8 - 7/8 by 16ths 7-169-113 378.00
27 Piece Collet Set 1/16 - 7/8 by 32nds 7-169-127 723.00
Metric Sizes
27 Piece Collet Set 1/16" - 7/8" by 32ndsPart Number: 7-169-127
13 Piece Collet Set 1/8" - 7/8" by 16thsPart Number: 7-169-113
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 560
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
561
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
5C Precision Round Collets• Concentricity guaranteed to 0.0004"
Size PartNumber
RetailPrice Size Part
NumberRetailPrice Size Part
NumberRetailPrice
3/64 7-168-002 21.88 27/64 7-168-050 12.66 51/64 7-168-098 12.66
1/16 7-168-004 14.06 7/16 7-168-052 12.66 13/16 7-168-100 12.66
5/64 7-168-006 14.06 29/64 7-168-054 12.66 53/64 7-168-102 12.66
3/32 7-168-008 14.06 15/32 7-168-056 12.66 27/32 7-168-104 12.66
7/64 7-168-010 14.06 31/64 7-168-058 12.66 55/64 7-168-106 12.66
1/8 7-168-012 12.66 1/2 7-168-060 12.66 7/8 7-168-108 12.66
9/64 7-168-014 12.66 33/64 7-168-062 12.66 57/64 7-168-110 12.66
5/32 7-168-016 12.66 17/32 7-168-064 12.66 29/32 7-168-112 12.66
11/64 7-168-018 12.66 35/64 7-168-066 12.66 59/64 7-168-114 12.66
3/16 7-168-020 12.66 9/16 7-168-068 12.66 15/16 7-168-116 12.66
13/64 7-168-022 12.66 37/64 7-168-070 12.66 61/64 7-168-118 12.66
7/32 7-168-024 12.66 19/32 7-168-072 12.66 31/32 7-168-120 12.66
15/64 7-168-026 12.66 39/64 7-168-074 12.66 63/64 7-168-122 12.66
1/4 7-168-028 12.66 5/8 7-168-076 12.66 1 7-168-124 12.66
17/64 7-168-030 12.66 41/64 7-168-078 12.66 1-1/64 7-168-126 12.66
9/32 7-168-032 12.66 21/32 7-168-080 12.66 1-1/32 7-168-128 12.66
19/64 7-168-034 12.66 43/64 7-168-082 12.66 1-3/64 7-168-130 12.66
5/16 7-168-036 12.66 11/16 7-168-084 12.66 1-1/16 7-168-132 12.66
21/64 7-168-038 12.66 45/64 7-168-086 12.66 1-5/64 7-168-134 26.00
11/32 7-168-040 12.66 23/32 7-168-088 12.66 1-3/32 7-168-136 26.00
23/64 7-168-042 12.66 47/64 7-168-090 12.66 1-7/64 7-168-138 26.00
3/8 7-168-044 12.66 3/4 7-168-092 12.66 1-1/8 7-168-140 26.00
25/64 7-168-046 12.66 49/64 7-168-094 12.66 – – –
13/32 7-168-048 12.66 25/32 7-168-096 12.66 – – –
18 Piece Collet Set 1/16 - 1-1/8 by 16ths 7-168-168 318.00
Fractional Sizes
External Thread: 1.238" x 20RHInternal Thread: 1.047" x 24 RH
5C Collet Power Chucks, 7-775,see pages 461-462
5C Collet Chucks, series 7-862,see pages 485-489
5C Collet Chuck AdaptersSee page 488
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 561
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
ColletsCOLLETS
562 COLLETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Collet Sets PartNumber
RetailPrice
18 piece 1/16 - 1-1/8 by 16ths 7-168-168 318.00
24 Piece 3mm - 26mm by 1mm 7-168-674 345.94
Size PartNumber
RetailPrice
3 mm 7-168-603 12.66
4 mm 7-168-604 12.66
5 mm 7-168-605 12.66
6 mm 7-168-606 12.66
7 mm 7-168-607 12.66
8 mm 7-168-608 12.66
9 mm 7-168-609 12.66
10 mm 7-168-610 12.66
11 mm 7-168-611 12.66
12 mm 7-168-612 12.66
13 mm 7-168-613 12.66
14 mm 7-168-614 12.66
15 mm 7-168-615 12.66
16 mm 7-168-616 12.66
17 mm 7-168-617 12.66
18 mm 7-168-618 12.66
19 mm 7-168-619 12.66
20 mm 7-168-620 12.66
21 mm 7-168-621 12.66
22 mm 7-168-622 12.66
23 mm 7-168-623 12.66
24 mm 7-168-624 12.66
25 mm 7-168-625 12.66
26 mm 7-168-626 12.66
24 Piece Collet Set3-26 mm by 1mm
7-168-674 345.94
Metric Sizes
5C Precision Round Collets• Concentricity guaranteed to 0.0004"
External Thread: 1.238" x 20RHInternal Thread: 1.047" x 24 RH
Description PartNumber
RetailPrice
1/16" Steel 7-168-404 14.06
Description PartNumber
RetailPrice
Adjustable 5C Collet Stop 7-460-200 12.50
Universal 5 pc 5C Collet Stop 7-460-210 26.30
Collet Sets
Universal 5 pc5C Collet Stop
Adjustable5C Collet Stop
Steel Emergency Collets
Optional Accessories
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 562
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
563
COLLETS
Collets
Quality Products • Partnership • Industry Experts COLLETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
16C Precision Round Collets• Concentricity guaranteed to 0.0004"• External thread: M47.5" x 1.75 RH• Internal Thread: 1-11/16 x 20 RH
Size PartNumber
RetailPrice Size Part
NumberRetailPrice Size Part
NumberRetailPrice
5/64 7-164-006 86.96 29/64 7-164-054 86.96 13/16 7-164-100 86.96
3/32 7-164-008 86.96 15/32 7-164-056 86.96 53/64 7-164-102 86.96
1/8 7-164-012 86.96 31/64 7-164-058 86.96 27/32 7-164-104 86.96
9/64 7-164-014 86.96 1/2 7-164-060 86.96 55/64 7-164-106 86.96
5/32 7-164-016 86.96 33/64 7-164-062 86.96 7/8 7-164-108 86.96
11/64 7-164-018 86.96 17/32 7-164-064 86.96 57/64 7-164-110 86.96
3/16 7-164-020 86.96 35/64 7-164-066 86.96 29/32 7-164-112 86.96
13/64 7-164-022 86.96 9/16 7-164-068 86.96 59/64 7-164-114 86.96
7/32 7-164-024 86.96 37/64 7-164-070 86.96 15/16 7-164-116 86.96
15/64 7-164-026 86.96 19/32 7-164-072 86.96 61/64 7-164-118 86.96
1/4 7-164-028 86.96 39/64 7-164-074 86.96 31/32 7-164-120 86.96
17/64 7-164-030 86.96 5/8 7-164-076 86.96 63/64 7-164-122 86.96
9/32 7-164-032 86.96 41/64 7-164-078 86.96 1 7-164-124 86.96
19/64 7-164-034 86.96 21/32 7-164-080 86.96 1-1/16 7-164-132 86.96
5/16 7-164-036 86.96 43/64 7-164-082 86.96 1-1/8 7-164-140 86.96
21/64 7-164-038 86.96 11/16 7-164-084 86.96 1-3/16 7-164-142 86.96
11/32 7-164-040 86.96 45/64 7-164-086 86.96 1-1/4 7-164-144 86.96
23/64 7-164-042 86.96 23/32 7-164-088 86.96 1-5/16 7-164-146 86.96
3/8 7-164-044 86.96 47/64 7-164-090 86.96 1-3/8 7-164-148 86.96
25/64 7-164-046 86.96 3/4 7-164-092 86.96 1-7/16 7-164-150 86.96
13/32 7-164-048 86.96 49/64 7-164-094 86.96 1-1/2 7-164-152 86.96
27/64 7-164-050 86.96 25/32 7-164-096 86.96 1-9/16 7-164-154 86.96
7/16 7-164-052 86.96 51/64 7-164-098 86.96 1-5/8 7-164-156 86.96
16C Collet Chucks• Plain back and SET-TRU• Steel Body• T.I.R. 0.0004"• 6000 RPM
No Workpiece Movement
ChuckSize
PartNumber
RetailPrice Mounting Holding
Capacity RPM Wtlbs
6"7-862-0601 1,057.20 Plain Back
1/16-1-5/8 600021.0
7-862-0605 1,369.02 SET-TRU 24.0
For a complete listing of 16C Collet Chucks see page 490
ChuckDia
PartNumber
RetailPrice Mounting
MountingBolt
Pattern
ClampingRange
Max Draw BarPull Force
lbf
MaxDraw BarStroke
WrenchPart
Number
RetailPrice
Wtlbs
6-1/4"
7-775-0631 477.45 Plain Back, Type 2904 5.5118 0.0625 - 1.625 5290 0.157
7-862-860 42.18
12
7-789-5065 385.89 A2-5Adapter Plate for 7-775-0631 3.31
7-789-5066 523.71 A2-6
16C Collet Power Chucks• Concentricity guaranteed to T.I.R. 0.0004"• Forged steel body• 6000 RPM For a complete listing of 16C Collet Power Chucks see page 463
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 563
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Collet Chuck SetsCOLLET
CHUCKSETS
564 COLLET SETS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
CAT TG100 Collet Chuck SetsEach TG100 Collet Chuck Set Includes:• Cat40 or Cat50 Collet Chuck• Assortment of TG 100 Collets• Spanner Wrench• Collet Nut• Wooden case
TaperSize
ColletType
SetPart Number
RetailPrice
Number ofPcs in Set Collet Sizes Chucks Included in Set
Part Number
40
ER 167-188-4190 275.00
9 1/8, 3/16, 1/4, 5/16, 3/87-188-415
7-188-4193 263.00 7-188-417
ER 327-188-438 397.00
131/8, 3/16, 1/4, 5/16, 3/8, 7/16,
1/2, 9/16, 5/8, 11/16, 3/47-188-431
7-188-439 373.50 7-188-432
ER 407-188-449 548.50
171/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
3/4, 13/16, 7/8, 15/16, 17-188-440
50 7-188-549 525.50 7-188-545
CAT ER Collet Chuck SetsEach ER Collet Chuck Set Includes:• Cat40 or Cat50 Collet Chuck• Assortment of ER Collets• Spanner Wrench• Collet Nut• Wooden case
TaperSize
ColletType
SetPart
Number
RetailPrice
Numberof Piecesin Set
Collet Sizes Included Chucks Included in SetPart Number
40 TG100
7-180-4033 415.5017
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4, 13/16, 7/8, 15/16, 1
7-180-403
7-180-4043 494.00 7-180-404
7-180-4038 915.0032
3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32,7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32,
3/4, 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1
7-180-403
7-180-4048 926.50 7-180-404
50 TG100
7-180-5033 501.0017
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4, 13/16, 7/8, 15/16, 1
7-180-503
7-180-5043 451.50 7-180-504
7-180-5038 918.0032
3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16,15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32,
3/4, 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1
7-180-503
7-180-5048 933.00 7-180-504
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 564
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
565
COLLET
CHUCKSETS
Collet Chuck Sets
Quality Products • Partnership • Industry Experts COLLET SETS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ER Collet Chuck SetsEach ER Collet Chuck Set Includes:• Collet Chuck• Assortment of ER Collets• Spanner Wrench• Collet Nut• Wooden Case
ColletType
SetPart Number
RetailPrice
ShankSize
OverallLength
ColletSizes
Chucks Included in SetPart Number
ER 117-171-1115 247.00 1/2
6.2 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/47-171-1105
7-171-1116 247.00 5/8 7-171-1106
ER 167-171-1616 241.50 5/8 6.0
1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/87-171-1606
7-171-1617 241.50 3/4 6.5 7-171-1607
ER 207-171-2017 305.00 3/4
5.5 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/27-171-2007
7-171-2019 306.50 1 7-171-2009
ER 257-171-2313 366.50 3/4
6.51/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2,
17/32, 9/167-171-2303
7-171-2315 366.50 1 7-171-2305
ER 32
7-171-3108 347.50 R8 6-1/4
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8, 11/16, 3/4
7-171-3008
7-171-313 331.00 NMTB 30 5-1/16 7-171-303
7-171-314 347.00 NMTB 406-1/16
7-171-304
7-171-3103 347.50 MT-3 7-171-3003
7-171-3101 349.50 1 3-3/4 7-171-3001
ER 40
7-171-4108 476.00 R8 6-1/2
1/8, 3/16, 1/4, 5/16, 3/8,7/16, 1/2, 9/16, 5/8,
11/16, 3/4, 13/16, 7/8, 15/16, 1
7-171-4008
7-171-414 476.00 NMTB 40 6-1/16 7-171-404
7-171-415 488.00 NMTB 50 7-3/4 7-171-405
7-171-4101 448.50 1 4-1/2 7-171-4001
7-171-4102 450.00 1-1/4 4-3/4 7-171-4002
ColletType
Nut Wrench
Part Number Retail Price Part Number Retail Price
ER 11 7-171-951 22.99 7-171-961 19.50
ER 16 7-171-966 25.64 7-171-976 21.30
ER 20 7-188-821 28.41 7-171-982 23.71
ER 25 7-188-825 31.63 7-188-925 19.70
ER 32 7-188-832 34.38 7-188-932 22.54
ER 40 7-188-840 41.68 7-180-930 29.07
English
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 565
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Drill ChucksDRILLCHUCKS
566 DRILL CHUCKS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ChuckModel
PartNumber
Capacity d MountK
D L L1 Wt
inches mm inches lbs
Precision Chucks 0.005 T.I.R.
13/J2 7-051-135 154.83
1/32-1/2 1-13
JT2
2 3.8 4.3 2.213/J33 7-051-137 154.83 JT33
13/J6 7-051-138 154.83 JT6
16/J6 7-051-168 182.001/8-5/8 3-16
JT62.3
4.06 4.65 3.1
16/J3 7-051-169 182.52 JT3 4.33 4.9 3.3
NC Quality Chucks 0.0015 T.I.R.
13/J2 7-051-335 154.83
1/32-1/2 1-13
JT2
2 3.8 4.3 2.213/J33 7-051-337 154.83 JT33
13/J6 7-051-338 154.83 JT6
16/J6 7-051-368 182.001/8-5/8 3-16
JT62.3
4.06 4.65 3.1
16/J3 7-051-369 182.52 JT3 4.33 4.9 3.3
Heavy Duty Keyless Drill Chucks• Keyless Drill Chucks are precision devices designed for high
accuracy applications on either conventional or CNC machinesin drilling, boring, and counterboring operations
• Designed to be tightened and released by hand• Self-tightening feature
Universal Drill ChucksKey Type
• Chucks are provided with key
Capacity PartNumber
RetailPrice Mount Wt lbs
without Keyinches mm
1/2 13
7-053-014 15.90 1/2-20
.807-053-015 15.90 JT33
7-053-016 15.90 JT6
5/8 16 7-053-025 17.50 5/8-16 1.30
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 566
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
567
QUICKCHANGETO
OLPO
STS
Quick Change Toolposts
Quality Products • Partnership • Industry Experts QUICK CHANGE TOOLPOSTS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
ToolpostSize H B B1 C D E F G
maxGmin
BarDia
Pmax
Pmin MT J K
maxKmin L N M
T.2 2.811.75 .315
1.00
2.93 .748 .748 2.07 1.44.748
1.81.945 2
2.56 1.871.06
3.821.32 1.00
T.2.T 2.99 3.31 1.001.00
2.30 1.56 1.97 2.76 2.01 4.17
T.3 3.76 2.00 .386 4.00 1.24 2.93 2.01 1.00 2.01 1.12 3 3.37 2.29 1.44 4.94 1.56 1.50
Principal Dimensions
Toolpost Sets and Individual ToolholdersType4494
Our full selection of toolholders and boringbars can be found in the IndexableCarbide section of this catalog
Quick Change Toolposts• Easy to set up on the lathe• Three different quick change toolholders
can be mounted on the toolpost
Type 4414 Type4498
Type4497
Type4496
Type4495
ToolHolder
PartNumber
RetailPrice
SetPart
Number
RetailPrice
LatheCapacity Description b x h MT
Hole dHoleDiaD
Wtlbs
T.2
7-196-9482 137.25
7-196-01T2 1,174.36 5" to 8"
3.88 x 1.97 – – –2.20
7-196-9582 137.25 V-Grove, Type 4495 – – .748 –
7-196-9782 150.65 MT, Type 4497 – 2 – – 2.65
7-196-9882 204.79 B. Bar,Type 4498 – – – 1.00 3.31
T.2.T
7-197-0T2T 570.53
7-197-1T2T 1,177.55 5" to 8"
Tool Post, Type 4414 3.23 x 3.00 – – –12.8
7-197-9582 142.99 V-Grove, Type 4495 – – .748 –
7-196-9782 150.65 MT, Type 4497 – 2 – 1.00 2.65
T.3
7-198-00T3 662.57
7-198-01T3 1,535.50 8" to 11.5"
Tool Post, Type 4414 3.94 x 3.62 – – – 24.0
7-198-9410 187.89 T and F, Type 4494 4.88 x 2.76 – – –4.40
7-198-9510 194.46 V-Grove, Type 4495 – – 1.00 –
7-198-9610 223.79 Cut Off, Type 4496 4.88 x 2.76 – – – 5.51
7-198-9810 267.65 B. Bar,Type 4498 – – – 1.500 5.73
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 567
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Tooling FixturesTO
OLINGFIXTU
RES
568 TOOLING FIXTURES Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Universal H/V CNC Tool Tightening Fixtures• Multiple usage on toolholder tapers NMTB/NST, ISO, CAT, BT, and DIN• Efficiently designed for maximum protection of toolholder• Enables strong gripping power of cutting tools in horizontal and vertical positions• Light weight and compact design for mounting on work table or tool cart
TaperSize
PartNumber
RetailPrice H L W Wt
lbs
CAT/BT 30 7-189-730 155.00 4.25 7.09 3.73 3.8
CAT/BT 40 7-189-740 160.00 4.25 7.09 3.73 4.2
CAT/BT 50 7-189-750 178.00 5.91 9.84 4.72 8.4
TaperSize
PartNumber
RetailPrice D K L d Wt
lbs
40 7-189-400 217.97 8.0 3.0 6.7 1.69 12.5
30, 40 & 50 7-189-543 283.17 8.0 4.5 9.5 2.83 36.0
Universal CNC Tool Tightening Fixtures• Multiple usage on toolholder tapers NMTB (ISO), CAT and BT• Efficiently designed for maximum protection of toolholder• Enables strong gripping power of cutting tools• Compact design for mounting on work table or tool cart
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 568
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
569
TOOLIN
GFIX
TURES
Tooling Fixtures
Quality Products • Partnership • Industry Experts TOOLING FIXTURES
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
4.72
5.98
4.0
5.31
.197
Fixture Adapter
.943.74
6.30
Ø.43"
Universal H/V Heavy Duty Tool Tightening Fixtures• Universal – one fixture can be used with many toolholder tapers – NMTB/NST, ISO, CAT, BT, and DIN• Efficiently designed for maximum protection of toolholder• Enables strong gripping power of cutting tools in horizontal or vertical positions• Heavy duty and compact design for mounting on work table or tool cart• Fixture and adapters sold separately
TaperSize
Fixture
APartNumber
RetailPrice
Wtlbs
CAT/BT 30
7-189-610 450.46 20 2.26CAT/BT 40
CAT/BT 50
Type 1117
Adapters
PartNumber
RetailPrice
Wtlbs
7-189-630 62.30 5.0
7-189-640 151.01 6.5
7-189-650 185.57 9.0
Working Positions
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 569
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Retention KnobsRETEN
TIONKNOBS
570 RETENTION KNOBS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Retention Knobs• Through the spindle coolant capability
Taper Size PartNumber
ThreadD1 D D2 D3 D4 L I1 I2 I3 S
CAT 40 7-189-905 5/8 - 11UNC .898 .492 .280 .744 1.496 .640 .437 .118 .748
CAT 50 7-189-950 1 - 8 1.400 .823 .500 1.146 2.244 1.000 .700 .197 1.185
HAAS 40 7-189-941 5/8 - 11UNC 1.280 .394 .118 .591 2.299 1.260 .984 .236 .748
PartNumber
RetailPrice
7-189-905 29.35
7-189-950 36.04
7-189-941 28.21
Type 9886
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 570
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
571
MILLIN
GMACHINEARBORS
Milling Machine Arbors
Quality Products • Partnership • Industry Experts MILLING MACHINE ARBORS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Style A Milling Machine Arborsfor 30, 40, and 50 National Standard Taper Spindles
• Milling machine arbors are made of top quality one piece forgings• Carefully heat treated and ground surfaces with extremely narrow tolerances
assure a rigid setup and accurate machining operations• All external threads are ground• Arbors are equipped with assorted width of solid spacers and the necessary
running bushings with standard keyways and threaded arbor nut• Style “A” arbors are provided with 23/32 x 1-3/4" end pilots• Draw Bar Threads:
#30 1/2" - 13#40 5/8" - 11#50 1" - 8
TaperSize
PartNumber
RetailPrice
ArborNumber
ArborDiad
LengthL
RunningBushingD x a
Number ofBushings
Wtlbs
30
7-010-005 310.65 30-7/8 - A10-2 7/8
101-5/8 x 2-5/8
1
6.15
7-010-010 341.80 31 - A10-2 1 6.83
7-010-015 379.27 31-1/4 - A10-21-1/4
8.37
7-010-017 379.27 31-1/4 - A10-3 1-7/8 x 3-1/8 9.14
40
7-010-027 326.22 41 - A8
1
8 – – 6.43
7-010-028 364.45 41 - A10 10 – – 7.42
7-010-030 421.76 41 - A12 12 – – 8.42
7-010-035 502.39 41 - A16-3 16 1-7/8 x 3-1/8 1 11
7-010-037 334.74 41-1/4 - A8
1-1/4
8 – – 8.53
7-010-038 401.95 41-1/4 - A10 10 – – 10.55
7-010-040 432.39 41-1/4 - A12 12 – – 11.86
7-010-045 530.02 41-1/4 - A16-3 16 1-7/8 x 3-1/8 1 14.77
50
7-010-055 626.96 50-7/8 - A18-4 7/8 18 2-1/8 x 3-3/4 1 16
7-010-057 376.43 51 - A8
1
8 – – 9.43
7-010-060 474.09 51 - A12 12 – – 11.37
7-010-065 600.29 51 - A18-4 18 2-1/8 x 3-3/4 1 17.28
7-010-070 544.84 51-1/4 - A121-1/4
12 – – 14.57
7-010-075 662.33 51-1/4-A18-4 18 2-1/8 x 3-3/4 1 20.32
These arbors have aright-hand thread
Style “A”
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 571
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Milling Machine ArborsMILLINGMACHINEARBORS
572 MILLING MACHINE ARBORS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Style B Milling Machine Arborsfor 30, 40 and 50 National Standard Taper Spindles
• Draw Bar Threads:#30 1/2" - 13#40 5/8" - 11#50 1" - 8
Style “B”
TaperSize
PartNumber
RetailPrice
ArborNumber
ArborDiad
LengthL
RunningBushingD x a
Number ofBushings
Wtlbs
30 7-015-002 239.89 31 - B2 1 2 – – 2.3
40
7-015-005 197.22 40-7/8 - B14-37/8
141-7/8 x 3-1/8 1
9.1
7-015-006 450.75 40-7/8 - B16-3 16 9.4
7-015-008 209.46 41 - B3
1
3 – – 3.7
7-015-010 464.21 41 - B14-3 141-7/8 x 3-1/8 1
11.5
7-015-015 576.03 41 - B20-3 20 13.8
7-015-017 225.03 41-1/4 - B3 1-1/4 3 – – 5
7-015-020 506.65 41-1/4 - B14-3 1-1/4 141-7/8 x 3-1/8
1
13.4
7-015-025 620.61 41-1/4 - B20-3 1-1/4 20 16.6
7-015-030 711.20 41-1/2 - B20-4 1-1/2 20 2-1/8 x 3-3/4 23.2
50
7-015-033 274.55 51 - B3-1/2
1
3-1/2 – – 6.8
7-015-035 506.65 51 - B15-4 15
2-1/8 x 3-3/4
1 15.1
7-015-040 564.68 51 - B18-4 182
18.4
7-015-045 662.33 51 - B24-4 24 21.0
7-015-047 303.58 51-1/4 - B3-1/2
1-1/4
3-1/2 – – 8.8
7-015-050 571.77 51-1/4 - B15-4 15
2-1/8 x 3-3/4
1 17.5
7-015-055 607.15 51-1/4 - B18-4 18
2
20.7
7-015-060 704.79 51-1/4 - B24-4 24 24.2
7-015-065 885.92 51-1/4 - B30-4 30 30
7-015-067 341.80 51-1/2 - B3-1/2
1-1/2
3-1/2 – – 9
7-015-070 655.98 51-1/2 - B18-4 18 2-1/8 x 3-3/4
2
25
7-015-075 781.20 51-1/2 - B24-5 24
2-3/4 x 4-1/4
36
7-015-080 952.46 51-1/2 - B30-5 30 44.6
7-015-090 948.96 52 - B24-5
2
24 48
7-015-095 1,050.12 52 - B30-5 30 62.3
7-015-100 1,025.34 52 - B36-5 36 73
7-015-105 1,576.57 52-1/2 - B36-6 2-1/2 36 3-3/8 x 4-1/4 94.3
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 572
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
573
MILLIN
GMACHINEARBORS
Milling Machine Arbors
Quality Products • Partnership • Industry Experts MILLING MACHINE ARBORS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Width ofSpacer
b
d = 7/8D = 1-3/8
Part Number
RetailPrice
d = 1D = 1-1/2
Part Number
RetailPrice
d = 1-1/4D = 1-3/4
Part Number
RetailPrice
1/16 7-020-005 9.43 7-020-090 9.69 7-020-175 9.40
3/32 – – 7-020-095 9.91 – –
1/8 7-020-015 10.04 7-020-100 10.17 7-020-185 9.98
3/16 – – 7-020-105 10.67 7-020-190 10.54
1/4 7-020-025 10.74 7-020-110 11.78 7-020-195 12.01
5/16 – – 7-020-115 12.24 7-020-200 12.47
3/8 7-020-035 11.69 7-020-120 12.70 7-020-205 13.09
7/16 – – 7-020-125 13.15 – –
1/2 7-020-045 12.44 7-020-130 13.55 7-020-215 13.94
5/8 7-020-050 13.19 7-020-135 14.27 7-020-220 14.76
3/4 7-020-055 15.51 7-020-140 16.39 7-020-225 17.09
7/8 – – – – 7-020-230 17.18
1 7-020-065 16.72 7-020-150 17.22 7-020-235 18.52
1-1/4 – – 7-020-155 20.84 7-020-240 21.99
1-1/2 7-020-075 19.83 7-020-160 22.02 7-020-245 21.63
2 7-020-080 22.62 7-020-165 24.45 7-020-250 26.77
3 – – 7-020-170 33.54 7-020-255 32.66
Width of keyway 1/8 1/4 5/16
Width ofSpacer
b
d = 1-1/2D = 2-1/8
Part Number
RetailPrice
d = 2D = 2-3/4
Part Number
RetailPriceRetail
Price
1/16 7-020-260 12.24 – –
3/32 7-020-265 12.47 – –
1/8 7-020-270 12.77 7-020-395 16.89
3/16 7-020-275 13.65 7-020-400 18.00
1/4 7-020-280 14.53 7-020-405 19.12
5/16 7-020-285 15.15 – –
3/8 7-020-290 15.81 7-020-415 21.15
1/2 7-020-300 16.89 7-020-425 23.24
3/4 7-020-310 19.96 7-020-435 27.19
1 7-020-320 22.12 7-020-445 30.63
1-1/4 7-020-325 24.39 – –
2 7-020-335 35.25 7-020-460 45.68
3 7-020-340 47.68 7-020-465 55.77
Width of keyway 3/8 1/2
Milling Machine Arbor AccessoriesSolid Spacers with Keyways
• Spacers are hardened and have parallel andperpendicular surfaces precisely groundto ensure precise operation of cutters onmilling machine arbors
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 573
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Milling Machine ArborsMILLINGMACHINEARBORS
574 MILLING MACHINE ARBORS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
OD ofbushing
D
PartNumber
RetailPrice
HoleDiad
Length ofBushing
a
Widthof
Keyway
1-5/87-025-005 30.60 7/8
2-5/81/8
7-025-010 36.03 1 1/4
1-7/8
7-025-015 43.39 1-1/4 2-5/8 5/16
7-025-025 45.26 13-1/8
1/4
7-025-030 47.91 1-1/4 5/16
2-1/8
7-025-040 51.35 1
3-3/4
1/4
7-025-045 51.25 1-1/4 5/16
7-025-050 52.13 1-1/2 3/8
7-025-060 63.95 1 4-1/4 1/4
2-3/4
7-025-065 63.09 1-1/4
4-1/4
5/16
7-025-070 67.59 1-1/2 3/8
7-025-075 65.32 2 1/2
3-3/8 7-025-080 81.50 2-1/2 4-1/2 5/8
Right Hand Nuts• RH nuts are hardened with a ground thread and shoulder
Running Bushings• Bushings are hardened and have parallel and perpendicular surfaces
precisely ground to ensure maximum holding power, rigid setup,and accurate machining operations
• Bushings have standard keyways which allow fixed mounting onarbor and prevent rotation
ArborDia
PartNumber
RetailPrice
ThreadSize
HeightH
FlatS
ODD
7/8 7-030-005R 29.92 7/8 - 14RH 0.75 1-1/8 1.38
1 7-030-010R 35.74 1-14RH0.88 1-1/4 1.62
1-1/4 7-030-015R 40.81 1-1/4 - 12RH
1-1/2 7-030-020R 70.72 1-1/2 - 12RH 1.31 1-13/16 2.10
2 7-030-025R 93.30 2 - 12RH1.75 2-3/8 2.72
2-1/2 7-030-030R 149.43 2-1/2 - 12RH
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 574
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
575
TAP
HOLD
ERS
Tap Holders
Quality Products • Partnership • Industry Experts TAP HOLDERS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
BT Taper CAT Taper
Integral Shank Tension/Compression Tap Holderswith CAT and BT Tapers, Series Number 32,000, Quick Change
• Compatible with BILZ System• 11 Piece Tap Holder and Adapter Sets available, see next page• This product does not have through spindle coolant capability
TaperSize
BT Taper CAT Taper Dinches
dmm
TapCapacity
ChuckSize
Tap ColletNumber
Tap ShankDia
TensionCompressionPart Number I Part Number I
40 7-336-4192.658
7-338-4192.972 1.30 19
M1.6-M140-9/16"1/8" NPT
#1 19/11- 0.110-0.472 0.354350 – 7-338-519
40 7-336-431 3.543 7-338-4313.397 1.97 31
M7-M205/16"-7/8"
1/8"-1/2" NPT#2 31/12- 0.236-0.866 0.5906
50 – 3.976 7-338-531
40 7-336-448 4.606 7-338-448 5.3942.83 48
M12-M339/16"-1-3/8"3/4"-1" NPT
#3 48/13- 0.354-1.417 0.944950 – 4.921 7-338-548 5.197
50 – 5.787 7-338-560 5.787 3.86 60M36-M42
1-1/2"-1-7/8"1-1/4"-1-1/2" NPT
#4 60/14- 0.630-1.417 1.0236
TaperSize
BT Taper CAT Taper
Part Number Retail Price Part Number Retail Price
40 7-336-419 300.83 7-338-419 288.23
50 – – 7-338-519 429.98
40 7-336-431 390.08 7-338-431 372.75
50 – – 7-338-531 466.20
40 7-336-448 843.68 7-338-448 805.35
50 – – 7-338-548 854.18
50 – – 7-338-560 1,200.15
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:19 AM Page 575
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Tap HoldersTA
PHOLD
ERS
576 TAP HOLDERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
BT Taper CAT Taper
Integral Shank Rigid Tap Holderswith CAT and BT Tapers, Series Number 21,080, Quick Change
• Compatible with BILZ System• Through spindle coolant capability• Tap Holder and Adapter sets available
TaperSize
BT Taper CAT TaperD
inchesd
mmTap
CapacityChuckSize
TapColletNumber
TapShankDia
PartNumber
RetailPrice I Part
NumberRetailPrice I
40 7-337-419 297.15 2.638 7-339-419 246.23 2.6381.3 19
M1.6-M140-9/16"1/8"NPT
#1 19/11- 0.110-0.47250 – – 3.071 7-339-519 308.70 3.071
40 7-337-431 303.98 3.543 7-339-431 246.23 3.5431.97 31
M7-M205/16"-7/8"
1/8"-1/2"NPT#2 31/12- 0.236-0.866
50 – – 3.976 7-339-531 336.53 3.976
40 – – 4.606 – –4.606 2.83 48
M12-M335/16"-7/8"
1/8"-1/2"NPT#3 48/13- 0.354-1.417
50 – – 4.921 7-339-548 619.50
11 Piece Tap Holder and Tap Adapter Set
TaperSize
SetPart Number
RetailPrice
Tap AdaptersIncluded in SetPart Number
HolderIncluded in SetPart Number
TapSizes
CAT40 7-339-719 615.00
7-340-1036
7-339-419
#6
7-340-1041 #8
7-340-1048 #10
7-340-1054 #12
7-340-1063 1/4
7-340-1079 5/16
7-340-1095 3/8
7-340-1111 7/16
7-340-1127 1/2
7-340-1142 9/16
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 576
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
577
TAPHOLD
ERS
Tap Holders
Quality Products • Partnership • Industry Experts TAP HOLDERS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Quick Change Positive Drive Tap AdaptersTap Shank ANSI B94.9-1999
TapSize Chuck
SizePart
NumberRetailPrice
Tap ShankDia f
DriveSquare Size a b c d D
Type
inches mm inches mm#6 M1.6-M3.5
#1
7-340-1036 38.12 0.141 0.110
21.5 7 11 19 30
19/11-4036#8 M4 7-340-1041 38.12 0.168 0.131 19/11-4041#10 M4.5, M5 7-340-1048 38.12 0.194 0.152 19/11-4048#12 – 7-340-1054 38.12 0.220 0.165 19/11-40541/4 M6, M6.3 7-340-1063 38.12 0.255 0.191 19/11-40635/16 M7, M8 7-340-1079 38.12 0.318 0.238 19/11-40793/8 M10 7-340-1095 38.12 0.381 0.286 19/11-4095
1/8 NPT(LS)* – 7-340-1097 38.12 0.437 0.328 19/11-40971/8 NPT(SS)** – 7-340-1098 38.12 0.313 0.234 19/11-4098
7/16 M11 7-340-1111 38.12 0.323 0.242 19/11-41111/2 M12, M12.5 7-340-1127 38.12 0.367 0.275 19/11-41279/16 M14 7-340-1142 38.12 0.429 0.322 19/11-4142
5/16 M7, M8
#2
7-340-2079 50.82 0.318 0.238
35
9 19
31 46
31/12-40793/8 M10 7-340-2095 50.82 0.381 0.286 9 19 31/12-40957/16 M11 7-340-2111 50.82 0.323 0.242 9 19 31/12-41111/2 M12, M12.5 7-340-2127 50.82 0.367 0.275 9 19 31/12-41279/16 M14 7-340-2142 50.82 0.429 0.322 10 9 31/12-41425/8 M16 7-340-2158 50.82 0.480 0.360 9 19 31/12-4158
11/16 M18 7-340-2174 50.82 0.542 0.406 9 19 31/12-41743/4 – 7-340-2190 50.82 0.590 0.442 10 9 31/12-4190
13/16 M20 7-340-2205 50.82 0.652 0.489 9 19 31/12-42057/8 UNF – 7-340-2222 50.82 0.697 0.523 10 9 31/12-42221/4 NPT – 7-340-2131 50.82 0.562 0.421 10 9 31/12-4131C3/8 NPT – 7-340-2166 50.82 0.700 0.531 10 9 31/12-4166C1/2 NPT – 7-340-2209 50.82 0.6875 0.515 10 9 31/12-4209C
1/2 M12, M12.5
#3
7-340-3127 135.45 0.367 0.275
55.5
10 17
48 48
48/13-41279/16 M14 7-340-3142 135.45 0.429 0.322 10 17 48/13-41425/8 M16 7-340-3158 135.45 0.480 0.360 10 17 48/13-4158
3/8 NPT – 7-340-3166 135.45 0.700 0.531 10 7 48/13-4166C11/16 M18 7-340-3174 135.45 0.542 0.406 10 27 48/13-41743/4 – 7-340-3190 135.45 0.590 0.442 10 23 48/13-4190
13/16 M20 7-340-3206 135.45 0.652 0.489 10 27 48/13-42061/2 NPT – 7-340-3209 135.45 0.6875 0.515 10 7 48/13-4209C
7/8 M22 7-340-3222 135.45 0.697 0.523 10 27 48/13-422215/16 M24 7-340-3238 135.45 0.760 0.570 12 30 48/13-4238
1 M25 7-340-3254 135.45 0.800 0.600 12 27 48/13-42543/4 NPT – 7-340-3264 135.45 0.9063 0.679 13 17 48/13-4264C
1-1/8 M27 7-340-3286 135.45 0.896 0.672 12 30 48/13-42861-1/4 M30 7-340-3317 135.45 1.021 0.766 12 27 48/13-43171 NPT – 7-340-3332 135.45 1.1250 0.843 13 17 48/13-4332C1-3/8 M33 7-340-3349 205.80 1.108 0.831 63 12 27 60 83 48/13-4349
1-1/2 M36
#4
7-340-4381 205.80 1.233 0.925
63 38 4 60 83
60/14-4381C1-5/8 M39 7-340-4412 205.80 1.305 0.925 60/14-4412C1-3/4 M42 7-340-4444 205.80 1.430 1.072 60/14-4444C1-7/8 – 7-340-4476 205.80 1.519 1.139 60/14-4476C
1-1/4 NPT – 7-340-4485 205.80 1.3125 0.984 60/14-4419C1-1/2 NPT – 7-340-4490 205.80 1.5000 1.125 60/14-4478C
* Long Shank** Short Shank
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:20 AM Page 577
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Tap HoldersTA
PHOLD
ERS
578 TAP HOLDERS Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
TapSize Chuck
SizePart
NumberRetailPrice
Tap ShankDia f
SquareDrive Size a b c d D
Type
inches mm inches mm#6 M1.6-M3.5
#1
7-341-1036 95.34 0.141 0.110
21.5 25 8 19 32
19/1-4036#8 M4 7-341-1041 95.34 0.168 0.131 19/1-4041#10 M4.5,M5 7-341-1048 95.34 0.194 0.152 19/1-4048#12 – 7-341-1054 95.34 0.220 0.165 19/1-40541/4 – 7-341-1063 95.34 0.255 0.191 19/1-40635/16 M7, M8 7-341-1079 95.34 0.318 0.238 19/1-40793/8 M10 7-341-1095 95.34 0.381 0.286 19/1-4095
1/8 NPT(LS)* – 7-341-1097 95.34 0.437 0.328 19/1-40971/8 NPT(SS)** – 7-341-1098 95.34 0.313 0.234 19/1-4098
7/16 M11 7-341-1111 95.34 0.323 0.242 19/1-41111/2 M12, M12.5 7-341-1127 95.34 0.367 0.275 19/1-41279/16 M14 7-341-1142 95.34 0.429 0.322 19/1-4142
5/16 M7, M8
#2
7-341-2079 124.95 0.318 0.238
35
33 4
31 50
31/2-40793/8 M10 7-341-2095 124.95 0.381 0.286 33 4 31/2-40957/16 M11 7-341-2111 124.95 0.323 0.242 33 4 31/2-41111/2 M12, M12.5 7-341-2127 124.95 0.367 0.275 33 4 31/2-41279/16 M14 7-341-2142 124.95 0.429 0.322 34 15 31/2-41425/8 M16 7-341-2158 124.95 0.480 0.360 33 4 31/2-41583/4 – 7-341-2190 124.95 0.590 0.442 34 15 31/2-4190
13/16 M20 7-341-2205 124.95 0.652 0.489 33 4 31/2-42057/8 M22 7-341-2222 124.95 0.697 0.523 33 4 31/2-4222
1/4 NPT – 7-341-2135 124.95 0.562 0.421 33 4 31/2-4131C3/8 NPT – 7-341-2168 124.95 0.700 0.531 34 15 31/2-4166C
3/4 –
#3
7-341-3190 271.43 0.590 0.442
55.5
42 8
48 72
48/3-419013/16 M20 7-341-3206 271.43 0.652 0.489 42 1 48/3-4206
1/2 NPT – 7-341-3209 271.43 0.6875 0.515 43 24 48/3-4209C7/8 M22 7-341-3222 271.43 0.697 0.523 43 4 48/3-4222
15/16 M24 7-341-3238 271.43 0.760 0.570 44 4 48/3-42381 M25 7-341-3254 271.43 0.800 0.600 44 4 48/3-4254
1-1/8 M27 7-341-3286 271.43 0.896 0.672 44 1 48/3-42861 NPT – 7-341-3332 258.50 1.1250 0.843 45 14 48/3-4332C1-3/8 M33 7-341-3349 271.43 1.108 0.831 44 1 48/3-4349
Quick Change Torque Control Tap AdaptersTap Shank ANSI B94.9-1999
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:13 AM Page 578
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
579
TAP
HOLD
ERS
Tap Holders
Quality Products • Partnership • Industry Experts TAP HOLDERS
Prices are subject to change without noticeBISON-BIAL® products are exclusively distributed by Toolmex Corporation
Tension and Compression Tapping Chuckswith Cylindrical Shank
• Provides axial float• Adjustable entry force
Shank SizeD1
ChuckSize
PartNumber
RetailPrice d D I L Tap
Capacity
1.00#1 7-343-010 182.70 .748 1.30 1.60 1.95 #6-9/16"
#2 7-343-020 233.10 1.220 2.00 2.50 2.00 5/16"-1/2 NPT
Rigid Tapping Chucks with Cylindrical Shank• Coolant through spindle capability• No float for synchronous tapping
ShankSizeD1
ChuckSize
PartNumber
RetailPrice d D I L Tap
Capacity Compensation
1.00#1 7-344-010 391.65 .748 1.50 1.76 1.95 #6-9/16" .35 .35
#2 7-344-020 483.53 1.220 2.17 2.52 2.00 5/16"-1/2 NPT .59 .59
1.50#2 7-344-030 515.03 1.220 2.17 2.52 3.50 5/16"-1/2 NPT .59 .59
#3 7-344-040 938.18 1.890 3.09 3.85 3.50 1/2"-1-3/8" .94 .94
BISON_Rotary_508-579.qxd:Layout 1 4/22/11 12:26 AM Page 579
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IndexINDEX
INDEX Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
7-s BISON-BIAL Rotary Toolingand Workholding
7-010 Style A Milling Machine Arbors . . . . . . . . . . . . . . . . . 571
7-015 Style B Milling Machine Arbors . . . . . . . . . . . . . . . . . 572
7-020 Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517, 573
7-025 Running Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . 574
7-030 Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517, 538, 574
7-030 Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517, 538, 574
7-048 Integral Drill Chucks NMTB . . . . . . . . . . . . . . . . . . . . 535
7-050 Shell End Mill Arbors with MT Shank. . . . . . . . . . . . . 539
7-051 Keyless Drill Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . 529, 566
7-052 Precision Drill Chuck Arbors. . . . . . . . . . . . . . . . . . . . 543
7-052-0 Jacobs Taper Adapters NMTB. . . . . . . . . . . . . . . . . . . 534
7-052-6 Morse Taper to Threaded Mount Adapters. . . . . . . . . 544
7-052-7 Jacobs Taper Adapters Straight Shank . . . . . . . . . . . . 550
7-052-8 Jacobs Taper Adapters R8 . . . . . . . . . . . . . . . . . . . . . 537
7-053 Universal Drill Chucks . . . . . . . . . . . . . . . . . . . . . . . . 566
7-060 Shell Mill Holders NMTB . . . . . . . . . . . . . . . . . . . . . . 533
7-064 Straight Shank Shell Mill Arbors . . . . . . . . . . . . . . . . 548
7-065 Shell End Mill Arbors with R8 Shank . . . . . . . . . . . . . 537
7-067 Shell Reamer Arbors . . . . . . . . . . . . . . . . . . . . . . . . . 541
7-068 Shell Reamer Arbors . . . . . . . . . . . . . . . . . . . . . . . . . 549
7-068-8 Arbor Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 549
7-068-9 Eject Collars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541, 549
7-s BISON-BIAL Rotary Toolingand Workholding
ProductGroup Description Page(s)
7-070 Slitting Saw Stub Mill Arbors with R8 Shank . . 538
7-072 Straight Shank Stub Milling Machine Arbors . . 546
7-080 Arbor Screws / Set Screws . . . . . . . . . . . . . . . . 515
7-080-0 Arbor Screws / Set Screws . . . . . . . . . . . . . . . . 526, 548
7-080-1 Keys and Key Screws . . . . . . . . . . . . . . . . . . . . 515, 526, 548
7-080-2 Keys and Key Screws . . . . . . . . . . . . . . . . . . . . 526
7-100 Morse Taper Adapters NMTB . . . . . . . . . . . . . . 534
7-110 Reducers NMTB 40 and 50. . . . . . . . . . . . . . . . 535
7-115 Morse Taper Adapters R8 Shank . . . . . . . . . . . . 538
7-120 Slitting or Slotting Saw Arbors . . . . . . . . . . . . . 306, 538
7-120-9 Wrench for R8 Slitting Arbor . . . . . . . . . . . . . . 538
7-121 Slitting or Slotting Saw Arbors . . . . . . . . . . . . . 306
7-123 Slitting and Slotting Saw Arbors. . . . . . . . . . . . 547
7-123-9 Arbor Screws . . . . . . . . . . . . . . . . . . . . . . . . . . 547
7-132 TG Collet Chucks with NST/NMTB Shanks . . . . 531
7-150 End Mill Holders with MT Shank, style 'B' . . . . 540
7-155 End Mill Holders with MT Shank, style 'A' . . . . 540
7-160 End Mill Holders with R8 Shank . . . . . . . . . . . . 537
7-161 TG Collet Chucks with R8 Shank . . . . . . . . . . . 536
7-162 Floating Reamer Holders . . . . . . . . . . . . . . . . . 548
7-164 16C Precision Round Collets. . . . . . . . . . . . . . . 563
7-164-8 16C to 5C Adapters . . . . . . . . . . . . . . . . . . . . . 463
7-165 End Mill Holders NMTB . . . . . . . . . . . . . . . . . . 532
7-166 TG Precision Single Angle Collets . . . . . . . . . . . 556, 557
7-167 DA180 Collet Chucks . . . . . . . . . . . . . . . . . . . . 531, 536, 546, 558, 559
7-168 5C Precision Round Collets and Collet Sets . . . 486, 561
7-168-4 Emergency Collet . . . . . . . . . . . . . . . . . . . . . . . 462, 486, 562
7-168-6 5C Precision Round Collets andCollet Sets, Metric . . . . . . . . . . . . . . . . . . . . . . 486, 562
7-169 R8 Precision Round Collets and Collet Sets . . . 560
7-170 Face Mill Holders . . . . . . . . . . . . . . . . . . . . . . . 534, 541
7-171 ER Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . 530, 536, 539, 545,552-555, 565
7-171-9 Nuts andWrenches for ER Collet Chucks . . . . . 545, 555, 565
7-172 BT30/40/50 TG Collet Chucks . . . . . . . . . . . . . . 522
7-173 BT40/50 Morse Taper Adapters. . . . . . . . . . . . . 527
7-174 Precision Ball Bearing Keyless Drill Chuckswith Integral BT Flange . . . . . . . . . . . . . . . . . . 526
7-175 BT30/40/50 Jacobs Taper Holders . . . . . . . . . . . 527
7-176 BT40/50 Shell End Mill Holders . . . . . . . . . . . . 525
7-177 BT40/50 Double Angle Collet Chucks . . . . . . . . 521
7-178 BT40/50 ER Collet Chucks . . . . . . . . . . . . . . . . 520, 521
7-178-8 Nuts for Collet Chucks . . . . . . . . . . . . . . . . . . . 510, 520, 521, 530, 536
7-178-9 Wrenches for Collet Chucks . . . . . . . . . . . . . . . 510, 520, 521, 530, 536
7-179 BT40/50 End Mill Holders . . . . . . . . . . . . . . . . . 523
7-180 CAT40/50 TG Collet Chucks . . . . . . . . . . . . . . . 511
580
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
581
INDEX
Index
Quality Products • Partnership • Industry Experts INDEX
(continued)
7-s BISON-BIAL Rotary Toolingand Workholding
ProductGroup Description Page(s)
7-180-4xxx CAT40 TG100 Collet Chuck Sets . . . . . . . . . . 564
7-180-5xxx CAT50 TG100 Collet Chuck Sets . . . . . . . . . . 564
7-180-9 Nuts andWrenches for Collet Chucks. . . . . . 510, 511, 520, 522,528, 531, 536
7-181 CAT40/50 Jacobs Taper Holders . . . . . . . . . . 518
7-182 CAT40/50 Face Mill Holders . . . . . . . . . . . . . 516
7-183 CAT40/50 Morse Taper Adapters. . . . . . . . . . 519
7-184 CAT 50 to CAT 40 Adapters . . . . . . . . . . . . . 519
7-185 CAT40/50 End Mill Holders . . . . . . . . . . . . . 512, 513
7-186 CAT40/50 Shell End Mill Holders . . . . . . . . . 514
7-187 Precision Ball Bearing Keyless DrillChucks Integral CAT V-Flange. . . . . . . . . . . . 516
7-188 ER Collet Chucks CAT40/50 . . . . . . . . . . . . . 509
7-188-4xxx CAT40 ER Collet Chuck Sets . . . . . . . . . . . . . 564
7-188-5xxx CAT40 ER Collet Chuck Sets . . . . . . . . . . . . . 564
7-188-8 Nuts for Collet Chucks and FloatingReamer Holders . . . . . . . . . . . . . . . . . . . . . .
510, 520, 528, 530,536, 539, 545, 548, 565
7-188-9 Wrenches for Collet Chucks, Drill Chucks,and Floating Reamer Holders . . . . . . . . . . . .
510, 511, 516, 520,526, 528, 530, 536,539, 545, 548, 565
7-189-4 Universal CNC Tool Tightening Fixtures. . . . . 568
7-189-6 Universal H/V Heavy DutyTool Tightening Fixtures 7 Adapters . . . . . . . 569
7-189-7 Universal H/V CNC ToolTightening Fixtures . . . . . . . . . . . . . . . . . . . . 568
7-189-9 Retention Knobs . . . . . . . . . . . . . . . . . . . . . . 570
7-191 CAT40/50 Stub Arbor Holders . . . . . . . . . . . . 517
7-192 CAT40/50 Semi Flush Slitting Saw Holders . . 518
7-193 CAT40/50 Double Angle Collet Chucks . . . . . 511
7-193-8 Nuts for CAT40/50 DA Collet Chucksand Extensions . . . . . . . . . . . . . . . . . . . . . . . 511, 531, 536, 546
7-193-9 Wrenches for DA Collet Chucks . . . . . . . . . . 511, 536, 546
7-195 Set Screws for End Mill Holders . . . . . . . . . . 512, 513, 524, 528,532, 537, 540
7-196 Quick Change Toolposts, T2 . . . . . . . . . . . . . 567
7-197 Quick Change Toolposts, T2.T . . . . . . . . . . . . 567
7-198 Quick Change Toolposts, T3 . . . . . . . . . . . . . 567
7-223 Modular Precision Vises . . . . . . . . . . . . . . . . 507
7-305 HSK Form A ER Collet Chucks . . . . . . . . . . . . 528
7-306 HSK Form A End Mill Holders . . . . . . . . . . . . 528
7-309 HSK Form A Jacobs Taper Holder. . . . . . . . . . 529
7-311 HSK Form A Integral Shank KeylessDrill Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . 529
7-336 Integral Shank Tension/CompressionTap Holders. . . . . . . . . . . . . . . . . . . . . . . . . . 575
7-337 Integral Shank Rigid Tap Holders, BT . . . . . . 576
7-339 Integral Shank Rigid Tap Holders, CAT . . . . . 576
7-340 Quick Change Positive Drive Tap Adapters . . 577
7-s BISON-BIAL Rotary Toolingand Workholding
ProductGroup Description Page(s)
7-341 Quick Change Torque Control Tap Adapters . . . . . . . . . . 578
7-343 Rigid Tapping Chucks with Cylindrical Shank . . . . . . . . . 579
7-344 Tension and Compression Tapping Chucks . . . . . . . . . . . 579
7-400 Solid Sockets with MT Hole . . . . . . . . . . . . . . . . . . . . . . 550
7-406 MT Taper Sleeves, Ext Length . . . . . . . . . . . . . . . . . . . . . 542
7-450 MT Taper Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
7-451 Drill Drifts, Hardened and Zinc Plated . . . . . . . . . . . . . . 544
7-460 5C Collet Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462, 486, 562
7-540 Half Dead Centers, Carbon Steel . . . . . . . . . . . . . . . . . . 477, 506
7-541 Half Dead Centers, Carbide Tipped . . . . . . . . . . . . . . . . . 506
7-550 Full Dead Centers, Carbide Tipped . . . . . . . . . . . . . . . . . 506
7-555 Full Dead Centers, Ball Bearing Steel . . . . . . . . . . . . . . . 506
7-565-0 Precision Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 500
7-565-1 Super Precision Live Centers . . . . . . . . . . . . . . . . . . . . . 500
7-566 NC Quad-Bearing Live Centers. . . . . . . . . . . . . . . . . . . . 499
7-567 Ultra Precision Adjustable Live Centers . . . . . . . . . . . . . 500
7-568-0 HD Super Precision Live Centers. . . . . . . . . . . . . . . . . . . 501
7-568-1 HD Ultra Precision Live Centers . . . . . . . . . . . . . . . . . . . 501
7-570 Live Centers with Interchangeable Inserts . . . . . . . . . . . 502, 503
7-573 Universal Pipe Live Centers . . . . . . . . . . . . . . . . . . . . . . 482, 498
7-575 Bull Head Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 499
7-590 Automatic Face Drivers . . . . . . . . . . . . . . . . . . . . . . . . . 504
7-590-8 Centers for Automatic Face Drivers . . . . . . . . . . . . . . . . 504, 505
7-590-9 Drive Pins for Automatic Face Drivers. . . . . . . . . . . . . . . 504, 505
7-609 Horizontal/Vertical Super Spacers and Parts. . . . . . . . . . 472-475
7-610-0 Tailstocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
7-610-1 Tailstocks for H/V Super Spacers . . . . . . . . . . . . . . . . . . 477
7-610-5 Face Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473, 478
7-610-8 Adjustable Tailstocks for H/V Super Spacers . . . . . . . . . . 477
7-613 Replacement Parts for H/V Super Spacers . . . . . . . . . . . 474, 475
7-621 Horizontal/Vertical Low Profile Rotary Tables . . . . . . . . . 476
7-622 Sets of Dividing Plates with Handle . . . . . . . . . . . . . . . . 476
7-630 Base Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 415, 478
7-630-6 Base Plates for SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . 415, 478
7-640 Low Profile Machine Fixture. . . . . . . . . . . . . . . . . . . . . . 480
7-640-9 Spare Parts for Low Profile Machine Fixture. . . . . . . . . . 480
7-645 Radial T-slot Table Face Plate Jaws. . . . . . . . . . . . . . . . . 435
7-630 Base Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 415, 478
7-630-6 Base Plates for SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . 415, 478
7-640 Low Profile Machine Fixture. . . . . . . . . . . . . . . . . . . . . . 480
7-640-9 Spare Parts for Low Profile Machine Fixture. . . . . . . . . . 480
7-645 Radial T-slot Table Face Plate Jaws. . . . . . . . . . . . . . . . . 435
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IndexINDEX
582 INDEX Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
7-s BISON-BIAL WorkholdingProductGroup Description Page(s)
7-775-05 5C Collet Power Chucks . . . . . . . . . . . . . . . . . . . . 461, 462
7-775-06 16C Collet Power Chucks . . . . . . . . . . . . . . . . . . . 463, 563
7-775-9 Parts for 5C Collet Power Chucks . . . . . . . . . . . . . 461, 462
7-781 Large Thru-Hole Power Chucks. . . . . . . . . . . . . . . 453, 455
7-785 Pneumatic Chucks . . . . . . . . . . . . . . . . . . . . . . . . 469, 471
7-786 Hard Top Jaws for Pneumatic Chuck . . . . . . . . . . 469
7-787-3 Hard Top Jaws for Power Chucks . . . . . . . . . . . . . 454, 455, 464, 465
7-788-3 Soft Top Jaws for Power Chucks . . . . . . . . . . . . . . 454, 455, 465
7-789 Draw Tube Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . 466
7-789-5 Adapters for Power Chucks . . . . . . . . . . . . . . . . . 460, 461, 463, 563
7-789-6 Blank Master Jaws, for Power Chucks . . . . . . . . . 465
7-789-7 BlankWedge Plungers for Power Chucks . . . . . . . 464, 465
7-789-9 T-Nuts and Bolts for Power Chucks . . . . . . . . . . . 464, 468, 469
7-790-9 15-3/4" Air Distribution Ring . . . . . . . . . . . . . . . 469
7-796 Hydraulic Cylinders with Closed Center . . . . . . . . 458, 461
7-797 Hydraulic Cylinders with Open Center . . . . . . . . . 459, 462
7-800 3-Jaw Scroll Chucks with Two-PieceHard Reversible Jaws, Universal . . . . . . . . . . . . . . 392
7-800-32 32" 3-Jaw Self-Centering Plain Back ScrollChucks, 10-1/2" Thru-Hole . . . . . . . . . . . . . . . . . . 410
7-801 3-Jaw, Type A1 and A2, Direct Mount Chucks,2 Piece Hard Reversible Jaws, Universal. . . . . . . . 395
7-803 3-Jaw, Camlock Type D1, Direct Mount Chucks,2 Piece Jaws, Universal . . . . . . . . . . . . . . . . . . . . 396
7-804 3-Jaw, Type L, Direct Mount Chucks,2 Piece Jaws, Universal . . . . . . . . . . . . . . . . . . . . 397
7-805 3-Jaw, Threaded, Direct Mount Chucks,Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
7-810 3-Jaw Scroll Chucks, Hard Solid Jaws,Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392
7-810-02 3-Jaw Self-Centering Mini-Scroll Chucks . . . . . . . 492
7-811 3-Jaw Semi-Steel Body Front Mounting ScrollChucks, Solid Jaws . . . . . . . . . . . . . . . . . . . . . . . . 414
7-812 3-Jaw Semi-Steel Body Front Mounting ScrollChucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . 413
7-813 3-Jaw Steel Body Front Mounting Scroll Chucks,2 Piece Jaws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413, 473
7-814 4-Jaw Semi-Steel Body Front Mounting ScrollChucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . 413, 473
7-819 3-Jaw Plain Back Semi-Steel Scroll Chucks, ExtraLarge Thru-Hole . . . . . . . . . . . . . . . . . . . . . . . . . . 412
7-820 3-Jaw Scroll Chucks, 2 Piece Hard ReversibleJaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
7-820-32 32" 3-Jaw Self-Centering Plain Back ScrollChucks, 10-1/2" Thru-Hole . . . . . . . . . . . . . . . . . . 410
7-820-40 40" 3-Jaw Self-Centering Plain Back ScrollChucks, 16" Thru-Hole . . . . . . . . . . . . . . . . . . . . . 411
7-821 3-Jaw, Type A1/A2, Direct Mount Self-CenteringScroll Chucks 2 Piece Hard Reversible Jaws . . . . . 379
7-s BISON-BIAL WorkholdingProductGroup Description Page(s)
7-823 3-Jaw, Type D, Direct Mount Self-Centering Scroll Chucks,2 Piece Hard Reversible Jaws, Precision . . . . . . . . . . . . . . . 380
7-825 3-Jaw Self-Centering Extra Heavy Duty OilCountry Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
7-829 3-Jaw Scroll Chucks, Two Sets of Hard SolidJaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
7-830 2-Jaw Scroll Chucks, Soft Top Reversible Jaws, Universal . . 393
7-840 4-Jaw Scroll Chucks, 2 Piece Hard ReversibleJaws, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
7-841 4-Jaw Scroll Chucks with Two-Piece Hard ReversibleJaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
7-843 3-Jaw Heavy Duty Self-Centering Chucks, MT Shank . . . . . 484
7-845 4-Jaw Scroll Chucks, Hard Solid Jaws, Universal . . . . . . . . . 393
7-847 4-Jaw Scroll Chucks, Two-Piece Hard ReversibleJaws, SET-TRU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
7-848 4-Jaw Combination Lathe Chucks, Semi-Steel Body . . . . . . 417
7-849 4-Jaw Combination Lathe Chucks, Steel Body . . . . . . . . . . 417
7-850 Jaw Semi-Steel Body Plain Back Independent Chucks,Solid and 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
7-851 4-Jaw Semi-Steel Body, Type A1/A2 Direct MountIndependent Chucks, Hard Solid Jaws . . . . . . . . . . . . . . . . 424
7-853 4-Jaw Semi-Steel Body, Type D1 Direct MountIndependent Chucks, Hard Solid Jaws . . . . . . . . . . . . . . . . 426
7-854 4-Jaw Semi-Steel Body, Type L Direct MountIndependent Chucks, Hard Solid Jaws . . . . . . . . . . . . . . . . 427
7-855 4-Jaw Steel Body Plain Back Independent Chucks,2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
7-856 4-Jaw Steel Body, Type A1/A2 Direct MountIndependent Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . 423
7-857 4-Jaw Steel Body, Type D1 Direct MountIndependent Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . 425
7-859 4-Jaw Independent, Extra Heavy Duty (OC) Chucks,Forged Steel Solid Body and Extra Large Thru-Hole . . . . . . 438
7-859-9 Type A Spindle Mounting Bolts for (OC) . . . . . . . . . . . . . . . 442
7-860 3-Jaw Self-Centering Rotating Chucks,MT Shanks, Solid Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482
7-860-7 3-Jaw Self-Centering Rotating Chucks, Adapter only . . . . . 482
7-861 3-Jaw Self-Centering Rotating Chucks, SET-TRU . . . . . . . . 481
7-862-04 Mini High Speed Plain Back 5C Collet Chucks . . . . . . . . . . 486
7-862-05 5C Collet Chucks for Mounting with Adapter Plate . . . . . . 487, 489
7-862-06 16C Plain Back and SET-TRU Collet Chucks . . . . . . . . . . . . 490, 563
7-862-8 Nuts andWrenches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462, 463,491
7-862-9 Mounting Bolts for 5C Collet Chucks . . . . . . . . . . . . . . . . . 487, 491
7-864 3-Jaw Quick Clamping Self-CenteringScroll Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494, 495
7-865 3-Jaw Self-Centering Rotating Chucks withMT Shanks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . 482
7-866 3-Jaw Scroll Chucks, 2 Piece Hard ReversibleJaws, SET-TRU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
583
INDEX
Index
Quality Products • Partnership • Industry Experts INDEX
(continued)
7-s BISON-BIAL Workholding
ProductGroup Description Page(s)
7-866-8 3-Jaw Scroll Chucks, Hard Solid Jaws, SET-TRU . . . . . . . 361
7-868 6-Jaw Scroll Chucks, Two-Piece Hard ReversibleJaws, SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
7-868-8 6-Jaw Scroll Chucks, Hard Solid Jaws, SET-TRU . . . . . . . 362
7-869 6-Jaw Quick Clamping Self-Centering Scroll Chucks . . . 494, 495
7-870 Rough Backplates for Threaded Spindles . . . . . . . . . . . . 399, 428, 488
7-871 Semi-Finished Threaded Backplates . . . . . . . . . . . . . . . . 381, 400, 428
7-871-05 Semi-Finished Threaded Backplates, for 5C . . . . . . . . . . 488
7-871-06 Semi-Finished Threaded Backplates, for 16C . . . . . . . . . 490
7-872 Chuck Base Plates for Front Mount Chucks . . . . . . . . . . 368, 415, 479
7-872-6 Base Plates for SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . 479
7-872-9 Bolts and Pins for Base Plates . . . . . . . . . . . . . . . . . . . . 415, 479
7-873 Semi-Machined and Fully-MachinedType A1/A2 Backplates. . . . . . . . . . . . . . . . . . . . . . . . . . 383, 402, 429
7-873-06 Semi-finished Adapters, Type A, for 16C 490
7-874 Fully Machined Type A Steel Backplates forSET-TRU Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
7-874-05 Machined Adapters, Type A, for 5C SET-TRU. . . . . . . . . . 489
7-874-06 Machined Adapters, Type A, for 16C SET-TRU. . . . . . . . . 490
7-875 Fully Machined Type D Steel Backplates forSET-TRU Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364, 591
7-875-05 Machined Adapters, Type D, for 5C SET-TRU. . . . . . . . . . 489
7-875-06 Machined Adapters, Type D, for 16C SET-TRU. . . . . . . . . 490
7-876 Fully Machined Threaded Steel Backplatesfor SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
7-876-05 Machined Adapters, Threaded, for 5CSET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
7-876-06 Machined Adapters, Threaded, for 16CSET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
7-877-05 Machined Adapters, Type A, for 5C . . . . . . . . . . . . . . . . 488
7-878 Semi-Machined and Fully MachinedType D1 Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382, 401, 430
7-878-05 Machined Adapters, Type D, for 5C. . . . . . . . . . . . . . . . . 488
7-878-06 Machined Adapters, Type D, for 16C. . . . . . . . . . . . . . . . 490
7-879 Fully Machined Type L Steel Backplates . . . . . . . . . . . . . 384, 403
7-879-05 Fully Machined Adapters, Type L, for 5C . . . . . . . . . . . . 488
7-879-06 Adapters, Type L, for 16C . . . . . . . . . . . . . . . . . . . . . . . . 490
7-879-9 Fully Machined Type L Steel Backplatesfor SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
7-879-9xxx Fully Machined Type L Steel Backplatesfor SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
7-880 OD Hard Solid Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371, 388,408, 416,483, 496
7-881 ID Hard Solid Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371, 388,407, 416,483, 496
7-880 OD Hard Solid Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371, 388,408, 416,483, 496
7-s BISON-BIAL WorkholdingProductGroup Description Page(s)
7-881 ID Hard Solid Jaws . . . . . . . . . . . . . . . . . . . 371, 388, 407, 416,483, 496
7-882 Soft Solid Jaws . . . . . . . . . . . . . . . . . . . . . . 372, 389, 409, 492, 496
7-883 Hard Top Jaws . . . . . . . . . . . . . . . . . . . . . . 370, 387, 406, 447, 480,483, 484
7-883-3xxx Enhanced Serration Jaws for Universaland Precision Scroll Chucks . . . . . . . . . . . . 389, 407
7-884 Soft Top Jaws . . . . . . . . . . . . . . . . . . . . . . . 372, 389, 408, 416, 433,483, 484
7-885 Hard Master Jaws. . . . . . . . . . . . . . . . . . . . 369, 386, 405, 410-412,416, 447, 480, 483,484, 496
7-886 Pinion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373, 390, 409-412, 416,418, 447, 480, 483, 484,486, 487, 491
7-887 Scroll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373, 390, 409-412, 416,418, 447, 480, 483, 484,486, 487, 491, 492, 496
7-888-5 Pinion Sleeves . . . . . . . . . . . . . . . . . . . . . . 373, 390, 447
7-888-7 Pinion Half Ring . . . . . . . . . . . . . . . . . . . . . 373, 390, 447
7-888-9 Pinion Screw . . . . . . . . . . . . . . . . . . . . . . . 373, 390, 408
7-889 Wrench. . . . . . . . . . . . . . . . . . . . . . . . . . . . 373, 390, 407, 416,434, 483, 486, 487,491, 492, 496
7-890-1 Hard Solid Jaws for Independent . . . . . . . . 433, 439
7-890-2 Hard Top Reversible Jaws for Independent . 432, 439, 440
7-890-3 Hard Master Jaws for Independent . . . . . . 432
7-890-6 Operating Screws for Independent. . . . . . . 434, 440
7-890-7 Thrust Bearings for Independent . . . . . . . . 434
7-890-9 Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . 434, 440, 441, 447, 448
7-891-1 Hard Reversible Jaws forCombination Chucks . . . . . . . . . . . . . . . . . 418
7-891-2 Hard Master Jaws forCombination Chucks . . . . . . . . . . . . . . . . . 418
7-891-3 Soft Solid Jaws for Combination Chucks . . 418
7-891-4 Operating Screw forCombination Chucks . . . . . . . . . . . . . . . . . 418
7-891-9 Wrenches for Combination Chucks . . . . . . 418
7-892-6 Hard Solid Jaws for 6-Jaw QkClamping Chucks . . . . . . . . . . . . . . . . . . . . 496
7-893 Hard Solid Jaws for Mini Scroll Chuck . . . . 492
7-897 Bolts and Screws . . . . . . . . . . . . . . . . . . . . 374, 375, 378, 379, 394,395, 406, 410, 412, 416,421-424, 435, 442, 449,468, 491
7-897-6 Fine Adjustment Screws, SET-TRU. . . . . . . . 374
7-898 Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462
7-899 Camlock Studs and Set Screws. . . . . . . . . . 375, 380, 382, 396, 401,425, 426, 430
7-909 5C Semi-Finished Backplates . . . . . . . . . . . 431
7-910 5C Adapters for Quick Clamping Chuck . . . 497
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
IndexINDEX
584 INDEX Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
7-s BISON-BIAL WorkholdingProductGroup Description Page(s)
7-912 Fully Machined Type C Steel Backplates forSET-TRU Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . 368
7-913 MT Adapters for Quick Clamping Chucks . . . . . . . 497
7-920 Fully Machined Type C Steel Backplates forSET-TRU Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . 366
7-920-06 Machined Adapters, Type C, for 16C SET-TRU. . . . 490
7-921 Type C Backplates . . . . . . . . . . . . . . . . . . . . . . . . 404, 431
7-921-05 Adapters, Type C, for 5C . . . . . . . . . . . . . . . . . . . . 488
7-921-06 Adapters, Type C, for 16C . . . . . . . . . . . . . . . . . . . 490
7-921-9 Type C, DIN Studs . . . . . . . . . . . . . . . . . . . . . . . . . 375, 404, 431
7-922 Fully-Machined Threaded Backplates forThreaded Spindles . . . . . . . . . . . . . . . . . . . . . . . . 381, 400
7-922-04 Machined Adapters, Threaded, for 4" 5C . . . . . . . 486
7-922-05 Machined Adapters, Threaded, for 5C. . . . . . . . . . 488
7-922-06 Machined Adapters, Threaded, for 16C. . . . . . . . . 490
7-980 Annular Cutter Holders, SS 3 Flats . . . . . . . . . . . . 223, 551
7-981 Annular Cutter Holders, MT Shank . . . . . . . . . . . . 223, 543
7-982 R8 Annular Cutter Holders . . . . . . . . . . . . . . . . . . 538
7-983 Annular Cutter Holders, SS 2 Flats . . . . . . . . . . . . 223, 551
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
585
CROSS
REFER
ENCE
Cross Reference
Quality Products • Partnership • Industry Experts CROSS REFERENCE
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
1650 7-110 Reducers NMTB 40 and 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535
1657 7-100 Morse Taper Adapters NMTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
1661 7-173 BT40/50 Morse Taper Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
1684 7-184 CAT 50 to CAT 40 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519
1691 7-183 CAT40/50 Morse Taper Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519
1751 7-450 MT Taper Sleeves Hardened & Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
1762 7-406 MT Taper Sleeves, Soft, Hardened Tang Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
1855 7-115 Morse Taper Adapters R8 Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538
1875 7-400 Solid Sockets with MT Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
1897 7-164-8 16C to 5C Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
2405 7-781 Large Thru-Hole Power Chucks, Plain Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
2500 7-790 Pneumatic Chuck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
2904 7-775 Plain Back Power Collet Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461, 463
2916 7-775-05 5C Direct Mount A2 Power Collet Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462
3105 7-830 2-Jaw Scroll Chucks, Soft Top Reversible Jaws, Universal. . . . . . . . . . . . . . . . . . . . . . . . . . . 393
3204 7-810 3-Jaw Scroll Chucks, Hard Solid Jaws, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392
3205 7-800 3-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws, Universal . . . . . . . . . . . . . . . . . 392, 410
3215 7-801 3-Jaw, Type A1 and A2, Direct Mount Chucks, 2 Piece Hard Reversible Jaws, Universal . . . 395
3245 7-803 3-Jaw, Camlock Type D1, Direct Mount Chucks, 2 Piece Jaws, Universal . . . . . . . . . . . . . . . 396
3255 7-804 3-Jaw, Type L, Direct Mount Chucks, 2 Piece Jaws, Universal. . . . . . . . . . . . . . . . . . . . . . . . 397
3266 7-864 3-Jaw Quick Clamping Self-Centering Scroll Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493-495
3274 7-811 3-Jaw Semi-Steel Body Front Mounting Scroll Chucks, Solid Jaws. . . . . . . . . . . . . . . . . . . . 414
3275 7-812 3-Jaw Semi-Steel Body Front Mounting Scroll Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . 413
3284 7-805 3-Jaw, Threaded, Direct Mount Chucks, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
3285 7-805 3-Jaw, Threaded, Direct Mount Chucks, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
3286 7-810-02 3-Jaw Mini Scroll Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
3295 7-819 3-Jaw Plain Back Semi-Steel Scroll Chucks, Extra Large Thru-Hole . . . . . . . . . . . . . . . . . . . 412
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Cross ReferenceCROSS
REFER
ENCE
586 CROSS REFERENCE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
3305 7-820 3-Jaw Scroll Chucks, 2 Piece Hard Reversible Jaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . 410
3307 7-820 3-Jaw Scroll Chucks, 2 Piece Hard Reversible Jaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . 410
3504 7-829 3-Jaw Scroll Chucks, Two Sets of Hard Solid Jaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . . 377
3505 7-820 3-Jaw Scroll Chucks, 2 Piece Hard Reversible Jaws, Precision . . . . . . . . . . . . . . . . . . . . . . . . 377
3515 7-821 3-Jaw, Type A1/A2, Direct Mount Self-Centering Scroll Chucks2 Piece Hard Reversible Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
3545 7-823 3-Jaw, Type D, Direct Mount Self-Centering Scroll Chucks,2 Piece Hard Reversible Jaws, Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
3564 7-866-8 3-Jaw Scroll Chucks, Hard Solid Jaws, SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
3565 7-866 3-Jaw Scroll Chucks, 2 Piece Hard Reversible Jaws, SET-TRU. . . . . . . . . . . . . . . . . . . . . . . . . 361
3575 7-813 3-Jaw Steel Body Front Mounting Scroll Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . . 413
3604 7-845 4-Jaw Scroll Chucks, Hard Solid Jaws, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
3605 7-840 4-Jaw Scroll Chucks, 2 Piece Hard Reversible Jaws, Universal . . . . . . . . . . . . . . . . . . . . . . . . 393
3675 7-814 4-Jaw Semi-Steel Body Front Mounting Scroll Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . 413
3705 7-841 4-Jaw Scroll Chucks with Two-Piece Hard Reversible Jaws, Precision . . . . . . . . . . . . . . . . . . 378
3765 7-847 4-Jaw Scroll Chucks, Two-Piece Hard Reversible Jaws, SET-TRU . . . . . . . . . . . . . . . . . . . . . . 362
3864 7-868-8 6-Jaw Scroll Chucks, Hard Solid Jaws, SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
3865 7-868 6-Jaw Scroll Chucks, Two-Piece Hard Reversible Jaws, SET-TRU . . . . . . . . . . . . . . . . . . . . . . 362
3866 7-869 6-Jaw Quick Clamping Self-Centering Scroll Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494, 495
3965 7-862-06 16C Plain Back and SET-TRU Collet Chucks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
4303 7-855 4-Jaw Steel Body Plain Back Independent Chucks, 2 Piece Jaws . . . . . . . . . . . . . . . . . . . . . . 421
4304 7-850 4-Jaw Semi-Steel Body Plain Back Independent Chucks, Solid and 2 Piece Jaws. . . . . . . . . . 422
4307 7-859 4-Jaw Independent, Extra Heavy Duty (OC) Chucks, Forged Steel Solid Body andExtra Large Thru-Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
4313 7-856 4-Jaw Steel Body, Type A1/A2 Direct Mount Independent Chucks, 2 Piece Jaws . . . . . . . . . . 423
4314 7-851 4-Jaw Semi-Steel Body, Type A1/A2 Direct Mount Independent Chucks, Hard Solid Jaws . . . 424
4317 7-859 4-Jaw Independent, Extra Heavy Duty (OC) Chucks, Forged Steel Solid Body andExtra Large Thru-Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
4343 7-857 4-Jaw Steel Body, Type D1 Direct Mount Independent Chucks, 2 Piece Jaws. . . . . . . . . . . . . 425
4344 7-853 4-Jaw Semi-Steel Body, Type D1 Direct Mount Independent Chucks, Hard Solid Jaws. . . . . . 426
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
587
CROSS
REFER
ENCE
Cross Reference
Quality Products • Partnership • Industry Experts CROSS REFERENCE
(continued)
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
4347 7-859 4-Jaw Independent, Extra Heavy Duty (OC) Chucks, Forged Steel Solid Body andExtra Large Thru-Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
4354 7-854 4-Jaw Semi-Steel Body, Type L Direct Mount Independent Chucks, Hard Solid Jaws . . . . 427
4414 7-197/8 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4494 7-198 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4495 7-196/7/8 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4496 7-198 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4497 7-196/7/8 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4498 7-196/8 Toolpost Sets and Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567
4605 7-848 4-Jaw Combination Lathe Chucks, Semi-Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
4805 7-849 4-Jaw Combination Lathe Chucks, Steel Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
5310 7-067 Shell Reamer Arbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541
5312 7-068 Shell Reamer Arbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 549
5353 7-052-7 Jacobs Taper Adapters Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
5355 7-052 Jacobs Taper Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
5357 7-181 CAT40/50 Jacobs Taper Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518
5362 7-052 Precision Drill Chuck Arbors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
5370 7-052 Jacobs Taper Adapters NMTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
5818 7-610 Tailstock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
5819 7-610 Adjustable Tailstock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
5859 7-621 Horizontal/Vertical Low Profile Rotary Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
6566 7-223 Modular Precision Vises. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
7020 7-072 Straight Shank Stub Milling Machine Arbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 546
7060 7-060 Shell Mill Holders NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
7318 7-191 CAT40/50 Stub Arbor Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
7320 7-075 Extended Shell Mill Holders NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
7349 7-170 Face Mill Holders NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
7374 7-192 CAT40/50 Semi Flush Slitting Saw Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Cross ReferenceCROSS
REFER
ENCE
588 CROSS REFERENCE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
7382 7-182 CAT40/50 Face Mill Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
7385 7-186 CAT40/50 Shell End Mill Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
7388 7-176 BT40/50 Shell End Mill Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525
7411 7-050 Shell End Mill Arbors with MT Shank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539
7470 7-052 Morse Taper to Threaded Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544
7550 7-065 Shell End Mill Arbors with R8 Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
7607 7-188 CAT40/50 ER Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
7616 7-171 ER Collet Chucks, NST/NMTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
7619 7-172 BT30/40/50 TG Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522
7620 7-165 End Mill Holders NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532
7624 7-179 BT40/50 End Mill Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523, 524
7626 7-178 BT40/50 ER Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
7636 7-185 CAT40/50 End Mill Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512, 513
7640 7-132 TG Collet Chucks, NST/NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
7650 7-177 BT40/50 Double Angle Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
7652 7-193 CAT40/50 Double Angle Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
7655 7-187 Precision Ball Bearing Keyless Drill Chucks Integral CAT V-Flange. . . . . . . . . . . . . . . . . . 516
7656 7-174 Precision Ball Bearing Keyless Drill Chucks with Integral BT Flange . . . . . . . . . . . . . . . . 526
7657 7-048 Integral Drill Chucks NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535
7665 7-167 DA180 Collet Chucks, NST/NMTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
7711 7-171 ER Collet Chucks MT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539
7720 7-155 End Mill Holders with MT Shank, style 'A' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
7721 7-150 End Mill Holders with MT Shank, style 'B' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
7812 7-171 ER Collet Chucks, Cylindrical Shank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545
7814 7-171 ER Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
7819 7-161 TG Collet Chucks with R8 Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
7820 7-160 End Mill Holders with R8 Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
589
CROSS
REFER
ENCE
Cross Reference
Quality Products • Partnership • Industry Experts CROSS REFERENCE
(continued)
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
7914 7-180 CAT40/50 TG Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
8204 7-922 Fully-Machined Threaded Backplates for Threaded Spindles . . . . . . . . . . . . . . . . . . . 381, 400
8205 7-870 Rough Backplates for Threaded Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
8206 7-871 Semi-Finished Threaded Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381, 400, 428
8210 7-873 Fully-Machined Type A1/A2 Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383, 402
8212 7-873 Semi-Machined Type A1/A2 Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383, 402, 429
8215 7-874 Fully Machined Type A Steel Backplates for SET-TRU Chucks. . . . . . . . . . . . . . . . . . . 363
8230 7-921 Fully Machined Type C Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
8232 7-921 Semi-Machined Type C Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404, 431
8235 7-920 Fully Machined Type C Steel Backplates for SET-TRU Chucks . . . . . . . . . . . . . . . . . . 366
8240 7-878 Fully Machined Type D1 Backplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382, 402
8242 7-878 Semi-Machined Type D1 Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382, 401, 430
8245 7-875 Fully Machined Type D Steel Backplates for SET-TRU Chucks . . . . . . . . . . . . . . . . . . 364
8250 7-879 Fully Machined Type L Steel Backplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384, 403
8255 7-879 Fully Machined Type L Steel Backplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
8262 7-870 Rough Backplates for Threaded Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
8283 7-913 MT Adapters for Quick Clamping Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
8285 7-876 Fully Machined Threaded Steel Backplates for SET-TRU. . . . . . . . . . . . . . . . . . . . . . . 365
8287 7-910 5C Adapters for Quick Clamping Chuck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
8288 7-912 Fully Machined Type C Steel Backplates for SET-TRU Chucks . . . . . . . . . . . . . . . . . . 368
8289 7-909 5C Semi-Finished Backplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
8293 7-872 Chuck Base Plates for Front Mount Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415, 479
8298 7-872 Chuck Base Plates for Front Mount Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 479
8410 7-590 Automatic Face Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504
8711 7-550 Full Dead Centers, Carbide Tipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
8712 7-555 Full Dead Centers, Ball Bearing Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
8730 7-540 Half Dead Centers, Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Cross ReferenceCROSS
REFER
ENCE
590 CROSS REFERENCE Toolmex Customer Service +1-508-653-8897 • 800-992-4766 • www.toolmex.com
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
8731 7-541 Half Dead Centers, Carbide Tipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
8811 7-565 Precision and Super Precision Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
8823 7-567 Ultra Precision Adjustable Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
8825 7-575 Bull Head Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499
8848 7-570-2 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
8849 7-570-3 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
8850 7-570-4 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8851 7-570-5 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8852 7-570-6 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8853 7-570-7 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8854 7-570-8 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8855 7-570-9 Interchangeable Inserts for Live Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
8883 7-573 Universal Pipe Live Center Tapered Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
9154 7-860 3-Jaw Self-Centering Rotating Chucks, MT Shanks, Solid Jaws . . . . . . . . . . . . . . . . . . 482
9155 7-865 3-Jaw Self-Centering Rotating Chucks with MT Shanks, 2 Piece Jaws. . . . . . . . . . . . . 482
9157 7-573 Universal Pipe Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
9164 7-861 3-Jaw Self-Centering Rotating Chucks, SET-TRU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
9165 7-861 3-Jaw Self-Centering Rotating Chucks, Body Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
9170 7-645 Radial T-slot Table Face Plate Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
9188 7-843 3-Jaw Heavy Duty Self-Centering Rotating Chucks, MT Shank . . . . . . . . . . . . . . . . . . 484
9419 7-640 Low Profile Machine Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480
9440 7-610 Face Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
9450 7-630 Base Plates for Back Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415, 478
9452 7-630 Base Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 415, 478
1304-SDC 7-796 Hydraulic Cylinders with Closed Center, Two Proximity Switches . . . . . . . . . . . . . . . . 458
1304-SKC 7-796 Hydraulic Cylinders with Closed Center, Linear Positioning System. . . . . . . . . . . . . . . 458
1305-SDC 7-797 Hydraulic Cylinders with Open Center, Two Proximity Switches . . . . . . . . . . . . . . . . . 459
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
591
CROSS
REFER
ENCE
Cross Reference
Quality Products • Partnership • Industry Experts CROSS REFERENCE
BISON-BIALModel Number
ToolmexProduct Group Description Page(s)
1305-SKC 7-797 Hydraulic Cylinders with Open Center, Linear Positioning System . . . . . . . . . . . . . . . . . . 459
2405-KA 7-781 Large Thru-Hole Power Chucks, A2 Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
2500-500-230 7-785 Pneumatic Chuck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
3515-HD 7-825 3-Jaw Self-Centering Extra Heavy Duty Oil Country Chucks, A2 Direct . . . . . . . . . . . . . . 444
3575-HD 7-825 3-Jaw Self-Centering Extra Heavy Duty Oil Country Chucks, A2 Indirect . . . . . . . . . . . . . 444
3911-5C 7-862 5C Collet Chuck, Plain Back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
3944-5C 7-862 5C Collet Chuck, Direct Mount Type D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
3960-5C 7-862-05 5C Collet Chuck, SET-TRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
3974-4 7-862-04 Mini High Speed Plain Back 5C Collet Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
3975-5C 7-862 5C Collet Chuck, Tru Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
3984-5C 7-862 5C Collet Chuck, Direct Mount Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
7626-S 7-178 BT40/50 ER Collet Chucks Extension Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
8814NC 7-566 NC Quad-Bearing Live Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499
Available from Logan Actuator Co. - (888) 95-LATHE - [email protected]
Toolmex Customer Service and Support+1-508-653-8897 • 800-992-4766 • Fax +1-508-653-5110
www.toolmex.com
4-999-0000 10.0 05/11©2011 Toolmex Corporation
Natick, MACorporate Headquarters1075 Worcester StreetNatick, MA 01760
Schaumburg, ILRegional Headquarters2015 S. Mitchell Blvd.Schaumburg, IL 60193
Mexico and Latin America3350 S.W. 148th Ave.Suite 110Miramar, FL 33027
Find Your Local Distributor at:http://www.toolmex.com/new/company/findDistributor.cfm
Scan and Explore