Chem Tac, Inc.Fredericksburg, Texas

Toll Free Orders: 1-800-654-8547Toll Free Fax: 1-800-900-7599

10th Edition

Bits & Spurs

1-800-654-854792

Bit TerminologyCHEM TAC

BIT TERMINOLOGY The following information is designed to assist both you and your customer in making the best possible bit selection. We believe, however, that one factor is paramount to the best possible bit selection. Good horsemanship requires proper use of all the aids used to cue the horse to perform. This includes the type of hands that initiate the pull of the bit.

Basic Concepts to remember when selecting a bit:

• Mouthpiecescanbemadeofdifferenttypesofmetals,hardrubberorflexiblerubber.Eachyields a different effect.

• Thethickerthemouthpiecethemilderthebit,becausethebitpressureisspreadoveralargerarea. The thinner the mouthpiece, the more severe the bit.

• Thelengthoftheshankdictatestheamountofcurbpressureandleverageorpressureappliedto the chin groove and the poll of the horse.

• Therearevariousmouthpiececonfigurations.Eachmouthpiecehelpstodeterminethefunctionofabit.(Seemouthpiecedescriptionsforadditionalexplanation).

• Alwaysremember,toachievethemosteffectiveresultsfrombittingahorseforaspecificuse,understand proper fit and function.

Basic Bit Types

Full Cheek SnaffleFor the traditional Hunter look, the Full Cheek Snaffle is available in a variety of mouthpieces. Each mouthpiece determines the function of the bit. The full cheeks prevent the cheeks from pulling through the horse’s mouth. And, when fitted with bit loops that attach to the bridle, the bit becomes more stable for increased lateral control.

KimberwickCommonly seen today in the English events of breed association horse shows, the Kimberwick uses a curb chain for increased leverage. The Uxeter Kimberwick has two rein slots, each changing the desired result. The upper slot is used to increase the pressure on the tongue, while the lower slot is used to increase leverage and curb chain pressure.

PelhamThe Pelham bit, with its double set of reins, combines the function of a snaffle and the action of a curb bit. The top rein provides snaffle pressure to the tongue and corners of the mouth, while the bottom rein increases leverage and curb chain pressure.

Weymouth and BradoonFor the finished dressage horse, the full or double bridle uses both the snaffle action of the Bradoon and the curb action of the Weymouth to encourage collection with softness through the bridle. Both bits working independently of each other allow the rider to use the most subtle cues.

Eggbutt SnaffleA very mild bit, the Eggbutt Snaffle is designed wide enough to be gentle on the bars and will not pinch the horse’s mouth.

Ring SnaffleA functional bit for all types of training, the loose rings of a Ring Snaffle help increase the bit movement, promote salivation and keep the mouth soft and the body supple.

Dee Ring SnaffleOne of the most basic forms of bitting, the Dee Ring Snaffle is a relatively mild snaffle that comes in a variety of mouthpieces, Whether you are starting a horse, or just going back to the basics, this bit helps with lateral movement while achieving suppleness from jaw to tail.

1-800-654-854793

Bit TerminologyTom Thumb SnaffleOne of the most basic shanked type snaffle bits, the Tom Thumb Snaffle serves as an excellent transition bit from a Ring Snaffle to a longer shanked snaffle or to a Curb Bit. This bit uses a small amount of curb pressure or leverage. The loose cheeks move independently allowing for more lateral flexibility.

Double Rein BitThe Double Rein Bit, as its name implies, can be used with four reins. This bit is also termed “Cowboy Pelham”. For normal use, the reins are attached to the shanks. But with the dee rings located at the mouthpiece, the second set of reins helps to achieve more snaffle action similar to the English Pelham bit.

Curb BitThe Curb Bit, one of the major bit types, is considered a leverage bit because of the action of the curb chain. When the reins are pulled and the curb chain is engaged, it applies pressure to the chin groove. The term Grazing Bit is commonly referred to as a Curb Bit with the bit shanks bent back to allow the horse to graze.

Gag BitThe sliding action of the Gag Bit applies pressure to the lips and corners of the mouth. This action along with the give and take of the rider’s hands help elevate the horse’s front end. This bit is commonly used by barrel racers for proper body position while turning the barrel. Some Gag Bits offer variable rein loops for greater lateral pull.

HackamoreThe Hackamore is designed to create pressure just above the soft tissue of the nose. And when the curb chain is engaged it also applies pressure to the chin groove. Used by ropers and barrel racers, the Hackamore is designed for getting quick stops from forward motion. Hackamores are available with a variety of nosebands from moderate to severe. They include fleece lined leather, flat leather, rubber, bicycle chain covered with rubber or plastic, laced leather, braided leather or rope. When combined with a mouthpiece, the Hackamore gains more lateral control.

Basic Mouthpieces

Low and Medium PortThese mouthpieces are relatively mild. The curvature of the port allows for tongue relief (applying minimal pressure across the width of the tongue). And, with rotation of the bit, the mouthpiece does not apply palate pressure (pressure applied to the roof of the mouth). Both mouthpieces will, however, apply pressure to the bars of the mouth that increase in severity as the mouthpiece diameter becomes smaller.

High PortJust as the Low and Medium Port mouthpieces provide tongue relief and apply pressure to the bars of the mouth, so does the high port.

RollerAlso termed as a “Cricket” mouthpiece, the Roller is commonly made of copper and can be combined with Medium and High Ports, Snaffle Mouths, Halfbreeds and Spades. This mouthpiece will apply tongue pressure as it lays across the tongue. It is an ideal mouthpiece to pacify nervous horses and at the same time promotes salivation.

Mullen MouthThis mouthpiece provides some tongue relief and does apply bar pressure. It is recommended for horses that dislike palate pressure.

SweetwaterThis mouthpiece does not apply tongue pressure and is recommended for horses with an injured tongue, or horses that dislike tongue pressure. It does, however, apply bar pressure.

CorrectionThe Correction mouth, when used as part of a leverage bit, can be considered severe because it applies tongue pressure at the flexible joint of the port and bar pressure. SnaffleThe snaffle configuration by itself is a mild bit and one of the most universally used mouthpieces. It can be thick and mild on the bars and tongue when covered with rubber, or severe if used as a thin twisted wire mouthpiece. It an be combined with many variations such as a Copper Roller, Dr. Bristol, Dog Bone, or Lifesaver mouthpiece.

1-800-654-854794

Red River Bits Red River Bit Co.Made in the USA

JUNIOR COWHORSE BITRR-1166Junior Cow horse, twisted 3-piece ¼” sweet iron bradoon mouth with 6” cheeks. A low leverage gag, excellent for horses with a lot of natural rate. An excellent mouthpiece for lifting your horse’s head and tucking his head at the same time.

FULL CHEEK SNAFFLERR-1202E3/8” sweet iron mouth piece. 3” dee designed to apply pressure to a horse’s lip on the opposite side of the face. This, coupled with the larger smooth mouthpiece, makes it one of our most popular bits.

D-RING BITRR-1240½” oval port mouthpiece, 3” dee applies pressure to the lip on the opposite side of the face from the rein you pull. With its limited travel, this is an excellent mouthpiece for colts or light mouthed horses. It applies a slight amount of tongue pressure for a good head set and will help pacify a nervous horse.

TRAINING SNAFFLERR-10113" Stainless Steel rings with 5" sweet iron bradoon mouthpiece and rope nose. The rope nose has been lowered to give more action between nose and mouth. The chain curb gives a hackamore action and feel by releasing the pressure on the bars. The smaller mouthpiece aids in softening the mouth and adds more control.

TRAINING SNAFFLERR-1012Stainless Steel ring with twisted wire mouthpiece and rope nose. The rope nose has been lowered to give more action between the nose and mouth. The chain curb gives a hackamore action and feel by releasing the pressure on the bars. Rings-3" Mouth-5".

JUNIOR COWHORSE BITRR-1107Junior cow horse bit, 3/8” sweet iron mouthpiece, 5” cheeks. This cheek gets more popular everyday. It helps to get your horse’s legs underneath him and his rear end down. The short gag action collects a horse very well. The smooth sweet iron snaffle mouthpiece is our most popular and is light enough to pull young colts around without damaging their mouth.

WONDER BITRR-1305With large twisted sweet iron snaffle for horses that need a little extra control. Used in a back and forth method, this bit will lighten a horse up and back him off the bit. 7" shank, 5" mouth.

WONDER BITRR-1307Wonder Bit with 3/8" sweet iron snaffle. This bit helps to pick a horse up and hold the shoulder until the turn is made. 7" shank, 5" mouth.

JUNIOR COWHORSE BITRR-1117-6Twis ted dogbone mouthpiece. Extremely good if you need help getting your horse’s legs underneath him and his rear end down. The short gag action collects a horse well. The three piece mouth adds a little more bite to this low leverage bit.

JUNIOR COWHORSE BITRR-1105Junior cowhorse bit with large twisted sweet iron mouth piece, 5” cheeks. A cheek with growing popularity. The short gag action collects a horse very well and helps to get his legs underneath him and his rear end down. The large twisted sweet iron snaffle is very popular and adds some “bite” to the relatively light bit. Great for horses that try to lug on the bit or need a little more control.

JUNIOR COWHORSE BITRR-1107-6Junior Cowhorse bit with a sweet iron snaffle mouthpiece and 4” cheeks. A very popular short cheek piece. It helps to get your horse’s legs underneath him and his rear end down. The short gag action collects a horse very well.

JUNIOR COWHORSE BITRR-1109Junior Cowhorse bit with large twisted copper mouthpiece and 5” cheeks, a cheek with a growing popularity. The short gag action collects a horse very well and helps to get his leg under him and his rear end down.

1-800-654-854795

Red River BitsRed River Bit Co.Made in the USA

WONDER BITRR-1327Wonder Bit with 3 piece sweet iron chain link snaffle offers light control and should be used with a curb chain. The mouthpiece breaks closer to the bars creating a greater angle and touching new nerves for more control. It has a slight amount of tongue pressure. 7" shank, 5" mouth.

HALF CIRCLE GAGRR-14075" sweet iron snaffle. One of the basic bits for training. The snaffle is easy on a horse's mouth and when used with a tie down will assist in head placement.

EASY TOUCH BITRR-1502Tom Thumb bit with 3/8” sweet iron snaf fle. 7” shank and 5” mouthpiece.

TOM THUMBRR-1502STom Thumb Jr. with sweet iron snaffle. 6" shank, 5" mouth.

TENDER TOUCH BIT RR-1505 Tom Thumb bit with large sweet iron twisted snaffle. 7” shank and 5” mouthpiece.

TENDER TOUCH BITRR-1506Tom Thumb bit with double twisted sweet iron and copper snaffle. 7” shank and 5” mouthpiece.

JUNIOR COW HORSE BITRR-1527CTender touch with a copper snaffle mouthpiece and a chain center. Low leverage shank for an easy control horse that needs a little more control than a ring snaffle. The Tom Thumb has been around for years.

DOG BONE GAGRR-1417Half Circle Gag with 3/8” 3-piece twisted wire with dog bone. Very popular with trainers to help set the head correctly on a young horse. Mouthpiece adds more control with bar contact and some tongue pressure to help set horse’s head. This bit has a surprising amount of control.

TENDER TOUCH BITRR-1508Small twisted mouthpiece gives a little more control than a ring snaffle. This is an extremely good shank. Low leverage but adds some curb pressure. Packs easily. This mouthpiece is one of the more severe ones.

TENDER TOUCH BITRR-1511Bradoon mouthpiece, low leverage shank for an easy control horse that needs a little more control than a ring snaffle. Young horses as well as tender mouthed horses will accept this mouthpiece well and the small mouth will give you more control.

TOM THUMB JR. BITRR-1516S1/2” 3-piece mouthpiece with mild steel center roller and 6” cheeks. One of the most common and most recommended bit s ever made. Excellent for leaving ring snaffle while training and an extremely good choice for older, well-bitted horses. If your horse has a good mouth, keep it good with a good bit.

TOM THUMB JR. BITRR-1517STwis ted wir e wi th dog bone mouthpiece and 6” cheeks. Excellent for leaving ring snaffle while training and an extremely good choice for older, well-bitted horses. If your horse has a good mouth, keep it good with a good bit.

1-800-654-854796

Red River Bits Red River Bit Co.Made in the USA

SWIVEL BITRR-1617The swivel top ring keeps the headstall in place while turning. The twisted dog bone mouthpiece breaks over the tongue to give new feel. Gag action helps collect the horse for better maneuverability and stops.

TENCY GAGRR-1810Tency gag with extra small stainless steel twisted snaffle. For the more experienced rider because it will "sore up" the corners of the horse's mouth. Ideal for a stiff horse. Good training bit. BEWARE: Heavy hands will make this a severe bit.

COMBINATION ROPE NOSE HACKAMORERR-2111With sweet iron bradoon snaf fle, works off a horse’s nose instead of his mouth. As you pick up on the reins, light pressure goes to the mouthpiece, keeping your horse light in the mouth. The rings can be snapped to the bit ring like a snaffle, or tie the rope rings together. Can tune up a mature horse. 3” rings, 5” mouth.

JR. CURB GAG BITRR-2208Jr. Curb Gag with small sweet iron twisted snaffle. Excellent for colts following ring snaffles because of the light or lowered leverage 6” shank. Used in early training when moderate curb action is desired. Has a moderate severe mouth for training.

REINING BIT RR-3005Stainless Steel reiner bit with large sweet iron twisted snaffle. 7" shank, 5" mouth.

EASY TOUCH BITRR-1817Easy Touch Bit with twisted dog bone mouth piece.

SEVEN BITRR-1921Seven Bit, solid cheek pleasure horse, 1/2” wide medium copper port mouth piece. Has 7” Trail Riders Cheek that is designed for effective communication and comfort for horses that spend hours under the saddle. Features include: low leverage, swept bank shanks (no lipping), short purchase for quick release and loose rein rings for less diagonal pressure. This mouth piece provides more tongue relief for a wide sensitive tongue.

JUNIOR CURB GAG BITRR-2210Features a stainless steel small twisted mouth piece which can be severe and adds lots of control. Do not tie a horse with this bit.

ROPE HACKAMORE SIDE PULLRR-2702Combination rope nose hackamore side pull with 3/8” sweet iron mouth piece.

JOHNSON HACKAMORE BITRR-2812Johnson hackamore bit with 7-1/2” cheeks designed by a leading barrel racing trainer. Excellent training or performance bit. Long gag action delivers plenty of lift as well as control. Rope nose conforms well and works on the bridge of the nose for rate and control. Chain mouth is superior in this bit to lessen the bar pressure and add tongue pressure to help set horse’s head and help provide the flex you need to turn your horse at the performance level.

SWIVEL BITRR-1607Swivel bit with 3/8” sweet iron mouth piece. Features a swivel top ring that keeps the headstall in place when turning, short shank for side pull action and large rings for lighter control. The mouthpiece is one of the most popular.

SEVEN BITRR-1944Seven Bit with high port mouthpiece. This cheek is designed for ef fective communication and comfort for horses that spend hours under the saddle. Low leverage, swept back shanks (no lipping), short purchase for quick release and loose rein rings for less diagonal pressure. The mouthpiece provides more tongue relief for a wide or sensitive tongue.

1-800-654-854797

Red River BitsRed River Bit Co.Made in the USA

REINER BITRR-3007Stainless Steel reining bit. 7” shank with die cast snaffle mouthpiece.

REINER BITRR-3009Stainless Steel reining bit. 7” shank with small twisted Copper snaffle mouthpiece.

WESTERN REINER BITRR-3202Stainless Steel reining bit. 7” shank with sweet iron snaffle mouthpiece.

WESTERN REINER BITRR-3212Western re iner bi t with chain mouthpiece. There is no bar pressure because the chain works on the corners of the mouth. Ideal for a horse that fights his head when a rider pulls on the bit. Good for older horses or colts. 8” shank, 5” mouth.

WESTERN REINER BITRR-3216Stainless Steel training bit, 8-1/2” shank with a unique sweet iron port that has the same diameter across the bars of the horse.

WESTERN REINER BITRR-3218Stainless steel reining bit. 7" shank with sweet iron Mullen mouthpiece.

WESTERN REINER BITRR-3220With sweet iron medium port similar to the ported mullen. The narrower port gives this bit a somewhat softer action. 8” shank, 5” mouth.

WESTERN REINER BITRR-3256With sweet iron snaf fle Life-Saver mouthpiece. This bit is a good transition bit from the ring snaffle to one with curb action. The half-ring on the cheeks allows a second pair of reins for martingales or draw reins. The Life-Saver mouthpiece is an excellent headsetting bit for young horses or may be used on hard to handle horses for maximum control. 8” shank, 5” mouth.

BARREL BITRR-3502With 3/8" sweet iron snaffle for light mouthed horses who need flex at the poll. The swivel sides allow the rider to get the horse's nose in the turn. 5" shank, 5" mouth.

JUNIOR SHOW BIT RR-3502SShort Shank Jr. Show Bit with 3/8” sweet iron snaffle mouth. Great looking and versatile! The larger 2” rein ring with slight gag action also provides poll press to collect for better control and stops. 4-1/2” shank, 5” mouth.

WESTERN REINER BITRR-3201Western Reiner with 1/2” copper mouth piece.

WESTERN REINER BITRR-3214One of the nicest medium control shanks ever made. Excellent balance and will not pinch. Can be ridden with a 4-rein to train. Mouth is one of the least severe snaffles. The limited travel keeps the snaffle from excess pressure on the outside bars. The roller, while acting as a pacifier for the nervous horse, also applies light tongue pressure for a better head set.

1-800-654-854798

Red River Bits Red River Bit Co.Made in the USA

PERFORMANCE BITRR-4021Stainless steel “C” bit with 5” shank, medium port copper mouthpiece.

GRAZING BITRR-4020Stainless steel “C” bit with 5” shank, medium port sweet iron mouthpiece.

GRAZING BITRR-4018Stainless steel “C” bit with 5” shank, sweet iron Mullen mouthpiece.

REINER CORRECTION BITRR-3725Stainless Steel correction bit with 7” shank. Three piece sweet iron correction mouthpiece.

SHORT SHANK REINER BITRR-3719Stainless steel training bit with 7” shank. Three piece sweet iron mouthpiece with copper roller.

GAG BIT RR-3624With 3/8" snaffle mouthpiece. A basic training and/or competition bit. The Copper mouthpiece will keep a horse's mouth moist and usable. 8" shank, 5' mouth.

GAG BITRR-3612 Stainless Steel gag with 7" shank and chain mouth.

ROPE NOSE GAG BITRR-3608SThe rope nosepiece gives a “soft” feel and the small twisted snaffle will pick a horse up and hold the shoulder.

GAG BITRR-3608Stainless Steel gag with 7" shank and small twis ted sweet iron mouthpiece.

ROPE NOSE GAG BITRR-3607SWith sweet iron snaffle, the rope nosepiece gives a “soft” feel to this bit and increases effectiveness. 8” shank, 5” mouth.

GAG BITRR-3605Stainless Steel gag with 7" shank and large twisted sweet iron mouthpiece.

BARREL BITRR-3520Barrel Bit with 1/2” medium port mouth piece.

1-800-654-854799

Red River BitsRed River Bit Co.Made in the USA

PERFORMANCE BIT RR-4118Stainless Steel all around bit with 8” shank, sweet iron Mullen mouthpiece.

PERFORMANCE BIT RR-4120Stainless Steel all around bit with 8” shank, medium port sweet iron mouthpiece.

PERFORMANCE BIT RR-4121Stainless Steel all around bit with 8” shank, medium port copper mouthpiece.

LIFTER BITRR-4708SShort shank lifter. Good for starting barrel training on a young horse or a horse that has a sensitive mouth and doesn’t need much bit. A nice soft bit that offers complete rate and lift in turns. Two piece sweet iron twisted mouthpiece.

GAG BITRR-4712Stainless Steel gag with 7" shank and chain mouth. Gag action the entire length of the shank.

SHORT SHANK LIFTER BIT RR-4726SShort gag bit with 3 piece ported bradoon. This bit allows for tongue relief yet gives more pressure to the outside of the bars. Very effective in head setting and/or breaking a horse at the poll. 7” shank, 5” mouth.

SHORT SHANK LIFTER BIT RR-4750SWith sawtooth mouthpiece, works similar to the chain type mouth, yet has more contour to the horse’s mouth to touch new nerves and give more control with a slight gag action. 7” shank, 5” mouth.

“C” BITRR-4821With medium port, this bit will help those who need plenty of control. As the rider pulls back, the tongue is compressed into the bottom of the mouth, but still gives the tongue a place to go. 7” shank, 5” mouth.

LIFTER BITRR-4702SLifter bit with 3/8” sweet iron snaffle and 6” shanks.

COMBINATION HACKAMORE BITRR-4417Combination hackamore with 1/4” 3-piece twisted dog bone mouth piece.

COMBINATION HACKAMORE BITRR-47B17Twisted wire dogbone mouthpiece. This is a bit for starting barrel training on horses that have a sensitive mouth that do not need much control. It is nice and soft, offering complete rate and lift for turns.

1-800-654-8547100

Red River Bits Red River Bit Co.Made in the USA

3-RING ARGENTINE BITRR-4902An all time classic cheek. Excellent for starting a colt on curb pressure, tuning a horse or riding any well bitted horse. This mouthpiece packs easily, offers medium control yet light enough to pull a young colt around.

ARGENTINE BITRR-5002Stainless Steel training/breaking bit. 5” shank with sweet iron snaffle mouthpiece.

ARGENTINE BITRR-5008Stainless Steel training/breaking bit with 5” shank. 5” sweet iron twisted snaffle mouthpiece.

ARGENTINE BITRR-5009Stainless Steel training/breaking bit. 5” shank with small twisted Copper snaffle mouthpiece.

ARGENTINE BIT RR-5010Argentine bit with extra small twisted stainless steel snaf fle. BEWARE: Heavy hands will make this a severe bit. Never tie a horse in with this bit. 6" shank, 5" mouth.

ARGENTINE BITRR-5011Stainless Steel training/breaking bit with 1/4” sweet iron bradoon 5” mouthpiece. 5” shank.

ARGENTINE BITRR-5012Argentine bit with chain mouthpiece. 6" shank, 5" mouth.

TRAINING BITRR-5018Stainless Steel training/breaking bit. 5" shank with sweet iron Mullen mouthpiece.

RING SNAFFLE BITRR-508Light 3” Stainless Steel r ing with small sweet iron twisted 5” snaffle.

RING SNAFFLE BITRR-509Medium 3” Stainless Steel ring with twisted copper mouth piece.

ARGENTINE BITRR-5017Argentine bit with 3-piece twisted dog bone mouth piece.

ARGENTINE BITRR-5019Argentine bit with 3-piece sweet steel mouthpiece with copper rings in center.

1-800-654-8547101

Red River BitsRed River Bit Co.Made in the USA

RING SNAFFLE BITRR-510Medium 3” Stainless Steel ring with 1/8” stainless steel twisted 5” snaffle. This mouth piece can be severe and adds lots of control. Do not tie a horse with this bit.

COLT BITRR-5132An ideal step up from a ring snaffle during the training process. It has a loose shank sidepull with large rein rings for lighter control. Sweet iron medium port mouth. 6" shank, 4-3/4" mouth.

RUTLEDGE ROPERRR-5252Sweet iron flat iron bar port. This is one of the most humane bits in our line. This bit may look severe, but it is not, and it is very effective. The revolving mouthpiece stays in place and each cheek works independently letting the curb chain apply pressure against the horse's chin. It is an ideal bit for roping, barrel racing, or general pleasure riding.

SAM JENKINS BITRR-5770Needing more control than a ring bit? This is an extremely good shank. Low leverage but adds some curb pressure for more control. This mouthpiece has lots of tongue relief for wide sensitive tongues. Port height is 2”.

SWEET SIX BITRR-6012Small chain mouthpiece with 3” cheeks and a 5-1/2” mouth. This bit offers the direct control of a snaffle with the additional control of curb pressure. The small chain mouthpiece adds more “bite” and even more flex than the snaffle sweet six.

RING SNAFFLE BITRR-605Heavy 3” Stainless Steel ring with large sweet iron twisted 5” snaffle.

RING SNAFFLE BITRR-606Heavy 3” Stainless Steel ring with double twisted Copper and sweet iron mouthpiece.

RING SNAFFLE BITRR-607Heavy 3” stainless steel ring with 3/8” sweet iron mouth piece.

RING SNAFFLE BITRR-616Heavy 3” Stainless Steel ring with a 7/16” sweet iron mouthpiece.

RING SNAFFLE BITRR-511Medium 3” ring snaffle with 1/4” mild steel Bradoon mouth piece.

COLT BITRR-5151Loose jaw colt bit with 5/8” Mullen mouth piece.

COMBINATION HACKAMORE BITRR-5512Combination hackamore with rope nose and chain mouth piece.

1-800-654-8547102

Red River Bits Red River Bit Co.Made in the USA

RING SNAFFLE BITRR-619Heavy 3” Stainless Steel ring with a three piece sweet iron mouthpiece with Copper rollers.

RING SNAFFLE BITRR-628Heavy 3” Stainless Steel ring with a three piece sweet iron mouthpiece.

COMBINATION GAG HACKAMORERR-63059” cheeks and rope nose for tuck and lift. Reshaped and longer shank for leverage and control. If you are running competition and your horse charges hard, this bit is designed especially for you. Sweet iron large twisted mouth piece.

COMBINATION GAG HACKAMORERR-6405With twisted sweet iron snaffle and leather covered nose. 8" shank, mouth.

STRIVERS HACKAMORE BITRR-6500Adjustable hackamore with rope nose, 7” shank. Tired of the pinching, blocking, and cocking of a standard hackamore? As you go to one rein, the opposite cheek will collapse against the head, helping to make this a turning tool to bend a colt’s head. It will also help correct an old horse’s problem. This bit should be ridden with a light hand, as this can be a strong stopping bit.

JARRET GAG BITRR-76613/8” copper ported Mullen mouth. This is a very smooth action gag cheek designed not to pinch. The 6-1/2” cheek gives it good control. The headstall ring with curb helps to stabilize the cheek and balance the bit. The Mullen relief helps this mouthpiece pack well. The port adds some tongue relief and the 3/8” diameter adds enough bite for surprising control with this bit.

STRIVERS LONG SHANK HACKAMORERR-6600-9 9” Shank

COMBINATION HACKAMORE BITRR-63179” cheeks and rope nose for tuck and lift. Reshaped and longer shank for leverage and control. If you are running competition and your horse charges hard, this bit is designed especially for you.

JARRETT GAG BITRR-7617Jarrett gag bit with 3/8” copper ported Mullen mouth and 6-1/2” cheeks. This is a very smooth action gag cheek designed not to pinch and gives good control. The headstall ring with curb helps to stabilize cheek and balance the bit. The Mullen relief helps this mouth piece pack well. The port adds some tongue relief. The 3/8” diameter adds enough bite for surprising control with this bit.

BARREL BITRR-7666Jarrett gag bit with 1/4” sweet ported bradoon and 6-1/2” cheeks. This is a very smooth action gag cheek designed not to pinch and gives good control. The headstall ring with curb helps to stabilize cheek and balance the bit. The relief helps this mouth piece pack well. The port adds some tongue relief. The 1/4” diameter adds enough bite for surprising control with this bit.

HIGH PORT ROPER BITRR-6770Nice all-around combination of shank and mouthpiece. A well balanced bit excellent for roping horses that need whoa! This mouthpiece has lots of tongue relief for wide sensitive tongues. Port height is 2”.

STRIVERS SHORT SHANK HACKAMORERR-6600 7” ShankThe unique design of this hackamore allows each cheek to move freely and independly without pinching or binding. Medium leverage shank combined with a chain nose that gives some bite to the bridge of the horse’s nose. Retains good control and has plenty of flex.

1-800-654-8547103

Red River BitsRed River Bit Co.Made in the USA

QUICK STOP RR-8400Stop-N-Turn with stainless steel 4-1/2” shank rigid curb that adds plenty of whoa. With the swivel shanks it adds flex and the combination steel curb and rope pressure will put the turn in the horse.

QUICK STOP RR-8300Stop-N-Turn with 4-1/2” shank rigid curb that adds plenty of whoa. With the swivel shanks it adds flex and the combination steel curb and rope pressure will put the turn in the horse.

GAG BITRR-8008This gag bit with a small twisted mouthpiece is designed to be ridden with the ring up to lock the headstall to help stabilize the bit or can be flipped over to lock the reins for a quicker response. This mouthpiece adds a lot of “bite” for schooling a horse.

LIFTER BITRR-7711Lifter bit with bradoon mouth piece.

LIFTER BITRR-7727CLifter bit with copper covered sweet iron mouth. This combination of tastes makes for a wet and soft mouth for better feel.

GAG BITRR-8012This gag bit with a chain mouthpiece is designed for horses that are heavy or lug on the bit. It can be turned either way in the horse’s mouth for the severity you need. Divided ring provides quicker response. Can be an effective training bit.

GAG BITRR-8017Gag bit with twisted 3-piece dog bone mouth piece.

GAL LEG REINER BITRR-8112Gal leg reiner bit with chain mouth piece.

CHRISTY GAG BITRR-8702Smooth 3/8” Sweet Iron mouth and 3” cheeks. Excellent draw gag that has more mouthpiece action than the half circle gag. Combined with a smooth sweet iron snaffle for good headset and flex at the poll. Not as severe as the three piece mouthpiece for better lift in the front.

CHRISTY GAG BITRR-8708Twisted 3/8” Sweet Iron mouth and 2-1/2” cheeks. Excellent draw gag that has more mouthpiece action than the half circle gag. This mouth piece packs well. It is small enough to have some bite for control but can be ridden for competition.

GRADUATION SNAFFLE BITRR-8617Graduation snaffle with 3-piece dogbone mouthpiece. The design of this bit is enhanced by the solid purchase above the cheek. This bit is for the broken horse that requires a smooth light feel in the mouth. As the horse graduates into a finished open barrel racing or speed event the reins can be dropped into the rein stop and a curb added for control. Headstall attaches to small ring above purchase.

COMBINATION HACKAMORERR-8517Combination hackamore with adjustable chain nose, 3-piece dogbone mouthpiece and 8” cheeks. There are two ways to stop a horse, pain or control. When you use pain, very soon your horse will stop turning in anticipation of the pain you are going to inflict on him at the end of the run. This nose shape spreads the contact across the full face of the horse. In most cases you can let your tie down out so your horse can run better yet still rate and collect your horse. Roping horses will stop much better on their rear end.

1-800-654-8547104

Red River Bits Red River Bit Co.Made in the USA

RING COMBINATION ROPE NOSE HACKAMORERR-911STraining snaffle with 5” sweet iron bradoon and rope nose. Works well on colts that try to get heavy on a regular snaffle. Gives a hackamore feel and action, while being mild in the mouth and adds a side pull effect from the rope noseband. 3” rings.

HEAVY RING SNAFFLE BITRR-917Heavyweight Stainless Steel 3” rings with three piece small twisted snaffle and rope nose. The heavier ring with a longer shank gives more control with easier touch. The three piece snaffle gives more feel to the mouth.

COMBINATION GAG BITRR-9817Rope nose hackamore with twisted dog bone mouthpiece. A nice medium control hackamore for advanced training when a young horse begins picking up speed and needs a little bit more rate than with the ring bit. Good for competition horses with natural rate.

CHRISTY GAG BITRR-8712Small chain 5” mouth and 2-1/2” cheeks. Excellent draw gag that has more mouthpiece action than the half circle gag. The chain mouth has become very popular with riders. The chain conforms well with the mouth and applies slight tongue pressure for good headset and control.

CHRISTY GAG BITRR-87173/8” twisted sweet iron dogbone mouth and 3” cheeks. Excellent draw gag that has more mouthpiece action than a half circle gag. The twisted mouthpiece adds a little bite for more control and the three piece dogbone adds some tongue pressure for better rate and increases bar pressure for better control.

JARRETT’S DRAW SHANKSRR-90009” draw shanks allow you to add the mouth piece of the draw bit you want. Made of stainless steel, the top rings unscrew to easily allow changing of draw bits.

GAG BITRR-9117With twis ted three piece dogbone mouthpiece.

POWER CURBRR-9990A creative alternative to the chain or leather curb for additional control. The power curb offers a firm feel even to short shanked bits.

SEVEN SHANK BITRR-S1920Loose cheek pleasure horse bit with 1/2” medium port sweet iron mouthpiece and 7” trail riders cheeks. This cheek is designed for effective communication and comfort for horses that spend hours under the saddle. The loose shank adds some flex. This bit’s features are: low leverage, swept back shanks (no lipping) and short purchase for quick release. This mouthpiece packs well and places less pressure on the bars.

SEVEN SHANK BITRR-S1935Loose cheek pleasure horse bit with square high port sweet iron mouthpiece. This cheek is designed for effective communication and comfort for horses that spend hours under the saddle. The loose shank adds some flex. This bit’s features are: low leverage, swept back shanks (no lipping) and short purchase for quick release.

CHAIN NOSE HACKAMORE BITRR-9200There are two ways to stop a horse, pain or control. When you use pain, very soon your horse will stop turning in anticipation of the pain you are going to inflict on him at the end of the run. This chain nose spreads the contact across the full face of the horse. In most cases you can let your tie down out so your horse can run better yet still rate and collect your horse. Roping horses will stop much better on their rear end.

SHAY LEE CHAIN HACKAMORERR-9000HAdjustable chain nose band barrel bit. There are two ways to stop a horse, pain or control. When you use pain, very soon your horse will stop turning in anticipation of the pain you are going to inflict on him at the end of the run. This nose shape spreads the contact across the full face of the horse. In most cases you can let your tie down out so your horse can run better yet still rate and collect your horse. Barrel horses will stop much bet ter on their rear end.

1-800-654-8547105

Bits

LIL’ “S” SIDEPULLMT-21208-26” stainless steel “S” shank with rope noseband and chain curb. This is a nice starter bit. Not a lot of “whoa” but excellent for flex and collection.

DEXTER RING BITMT-21240Stainless steel 5” half cheek Dexter ring bit with no prongs.

BITMT-21240-1RStainless steel, half cheek Dexter Ring Bit with prongs. 5” rubber mouth.

DEXTER RING BITMT-21240-RStainless steel, half cheek, 5” rubber mouth Dexter ring bit.

PEE WEE BIT Patented

Designed by a horseman for horsemen

The ultimate bit for educating and controlling horses

Improve Communication and Performance•Less Invasive, A Solution for Fussy Mouths•Ideal for Educating or Re-educating Horses•Many Benefits for Horse and Rider•No Need To Change Bits. Use the Pee Wee Horse Bits For •All Work

Suitable for trail riding, show jumping, eventing, barrel racing, team penning, campdrafting, dressage, driving, reigning, polo, thorobred and harness racing.

MAXIMUM CONTROL - MINIMUM PRESSUREThe amazing control of the bit comes from specific placement of angled side bars which only contact the lower jaw. It is the position of these bars which give very direct and precise signals to the horse.

Standard Size

Large Size

LARGE RING TURNED DOWN AND REINS ATTACHED TO LARGE RING:Recommended position for general day to day riding, barrel racing, campdrafting, horse racing, etc. Provides safety in barriers for racing. Keeper strap remains loose under chin – avoid fastening too tightly.

LARGE RING UP AND REINS ATTACHED TO LARGE RING:Remedial position to prevent mouth chafing (common in race horses) by keeping the reins away from the sides of the mouth. If the condition already exists this position will promote healing. This position also elevates the bar in the mouth which prevents the horse getting its tongue over the bar. Keeper strap remains loose under chin – avoid fastening too tightly.

LARGE RING UP AND REINS ATTACHED TO SMALL RINGS:Recommended position for extra leverage, eg. Eventing, show jumping, reining and roping. Keeper strap remains loose under chin – avoid fastening too tightly.

PEE WEE BITMAC-PWB001 Standard SizeMAC-PWB002 Large Size

Look for improvement in Performance:Maximum control – Minimum pressure•Gentle on the horse’s mouth, preventing injury•Helps less physical riders control large head, strong horses•Assists in re-educating problem horses•More accepting of the bit – the Pee Wee Bit is light weight •and the horse is very comfortable with the bitYour horse will settle better and be more relaxed in running, •head will be in correct positionPrevents lugging and evasion of the bit•Faster education of young horses due to a precise clear signal •which minimizes confusion – a must for horse breakersPrevents your horse getting its tongue over the bit•The way the horse yield to the pressure also encourages •neck subtleness which is very important in disciplines such as dressageThe way the horse yields to the bit encourages neck flex •and helps lower the head at the same time, allowing a more stable, controlled turn at speed, which is a hugh advantage for disciplines such as campdrafting, polo and barrel racing

REINS

REINS

REINS

1-800-654-8547106

Bits

BIT, "MARGARITA"MT-23707-3Antique finish with engraved trim, 5-1/8" sweet iron low port mouth with copper inlays, 7-1/4" cheeks.

ANTIQUE 66 TWISTED DOG BONE GAG BITMT-238135-1/8” sweet iron twisted dog bone curved mouthpiece and 5” cheeks with gag effect.

ANTIQUE 66 ROPE TWISTED GAG BITMT-23813-55-1/8” sweet iron twisted curved mouthpiece in combination with a rope nose band. 5” cheeks with gag effect.

ANTIQUE BARB WIRE SNAFFLE DEE BITMT-23820-55-1/8” sweet iron curved mouthpiece with copper inlays, stainless steel barb wire and engraved trim.

BLACK SATIN FLAT CALVARY BITMT-238305-1/8” articulated hinged port curved mouthpiece with copper inlays. 8-1/4” flat calvary cheeks with floral, stars and dots trim.

BLACK SATIN SHORT GAG BITMT-23830-55-1/8” sweet iron smooth snaffle dog bone mouthpiece with copper inlays. 5-1/2” short shank with gag effect and floral decorations.

ANTIQUE CONCHOS PORTED CHAIN BITMT-238475-1/4” sweet iron ported chain mouthpiece, 7-1/4” straight cheeks with three conchos and trim.

BITMT-21310Stainless steel screw bit.Stemins/Spicer.

BITMT-21518Full cheek snaffle bit. Stainless steel with 5” copper mouth, 6-1/2” cheeks.

BITMT-23620Antique horseshoe low articulated correction bit. 5-1/8” low port mouth with copper roller, 7-1/2” shanks with horseshoe and floral design.

BITMT-23701Antique finish with 5" sweet iron 3-piece dogbone mouth with copper wrapped links. 7" cheeks with star cutout concho, stars and dots.

ANTIQUE DIAMOND RHINESTONE C-SHANK BITMT-23841-57-3/4” cheeks with clear rhinestones on diamond trim, dots and half moon hand engraved trim. 5-1/8” 3-piece snaffle mouthpiece with sweet iron wrapped link.

1-800-654-8547107

Bits

HACKAMOREMT-25100Stainless Steel with gum rubber covered bike chain noseband. 8-1/2" cheeks, Horse size.

HACKAMOREMT-25100-1Stainless Steel, clear plastic covered bike chain noseband, 10" cheeks.

BITMT-25000-2Antique 8" "S" shank with diamond and dots, 5-1/2" sweet iron big links chain mouth, flat curb chain and PP connector.

BITMT-25000-3Antique 7" shank with rope, d i am o n d an d d o t s t r im . 5 -1 /8 " swee t i r on po r t ed chain mouthpiece with rubber keepers. Flat curb chain and PP connector.

BITMT-25000-6Antique straight control bit with PP connector. 8-1/4" shank with dots. 5-1/8" sweet iron medium ported curved mouthpiece.

BIT, SWEETWATERMT-25010Stainless steel "Natural Balance" bit with 7" 2-part swivel shank, 5-1/8" sweet iron copper covered sweetwater mouthpiece.

BIT, HIGH PORTMT-25010-2Stainless Steel “Natural Balance” bit with 7” 2-part swivel shank, 5-1/8” sweet iron copper covered high port mouthpiece.

ANTIQUE SCHOOLING SNAFFLE BITMT-25000-73” rings with free swiveling top purchase, 5-1/8” sweet iron 3-piece snaffle curved mouthpiece with center link.

BITMT-24069-9Three piece mouth with copper rollers, stainless steel with 7” cheeks.

BIT“STAR CORRECTION”MT-24075Antique with engraved German Silver stars and dots. 5” Stainless smooth correctional por t with copper barrels. 8” shank.

MINI BIT WITH COPPER SNAFFLEMT-24066-2Stainless steel mini horse training bit with 3-1/2” copper snaf fle mouthpiece, 5” cheeks.

BITMT-2473Anti-lugging bit. Stainless steel, 5” with control bar under chin.

1-800-654-8547108

Bits

STOP & TURNMT-25107-3Stainless Steel with rope nose, 5" cheeks.

PONY HACKAMOREMT-25108Stainless Steel, 7-1/2" cheeks, Pony size.

HACKAMOREMT-25110-8 Stainless Steel. Braided leather nose. 9" cheeks.

HACKAMOREMT-25111Chrome plated, braided leather nose. 9" cheeks.

HACKAMOREMT-25113Chrome plated. Doubled and stitched leather noseband. 9" Cheeks

SLOBBER BARMT-251255-1/2" Stainless Steel slobber bar wire.

COMBINATION HACKAMOREMT-25156-2Stainless Steel, 5" copper snaffle mouth, 7-1/4" cheeks.

CURB BITMT-25208Nickel Plated Bit with 7-3/8" Cheeks, 5" Mouth.

COMBINATION HACKAMOREMT-25107-2Stainless Steel 5-1/4" Sweet Iron, Twisted Wire Snaffle with Rope Noseband, 7" Cheeks.

COMBINATION HACKAMOREMT-25105Stainless Steel, sweet iron twisted wire snaffle with leather wrapped noseband. 10" cheeks.

COMBINATION HACKAMOREMT-25106Stainless Steel sweet iron twisted wire snaffle with leather wrapped noseband. 8" cheeks.

HACKAMOREMT-25107Stainless Steel adjustable hackamore with rope nose. 7-1/2"cheeks.

1-800-654-8547109

Bits

RING SNAFFLEMT-25228Nickel plated, 5-1/4" mouth, 2-1/4" rings.

RING SNAFFLEMT-25224Nickel plated, 4-1/2" snaffle mouth, pony bit, 1-3/4" rings.

RING SNAFFLEMT-25228-15" Malleable Iron Snaffle Bit, 2-1/4" Ring.

CORRECTION BITMT-25246Black Steel, 5" correction bit with Copper inlay. 8" cheeks.

BITMT-25249Black Steel 5" snaffle mouth with Copper inlay, 8" cheeks.

RING SNAFFLEMT-25228-2Black Steel, 5" snaffle mouth, 3" rings.

BITMT-25251Stainless Steel Sweet Iron Twisted Wire Snaffle, 3" Dees.

BITMT-25253Stainless Steel 5-1/4" Sweet Iron Snaf f le Mouth, 6-1/2" Loose Cheek.

BITMT-25211Nickel plated, 6" cheeks, 5" mouth.

PONY CURB BITMT-25209Nickel plated Pony bit, 4" medium port mouth, 6-5/8" cheeks.

BITMT-25220Hand-bu f fed, Nicke l p la ted malleable Iron, 9" cheeks, 5-1/8" mouth.

BITMT-25221Nickel Plated, 6" cheeks, 4-1/2" mouth.

1-800-654-8547110

Bits

BITMT-25280Black Steel bit with 6-1/2" plain cheeks, 5" mouth, medium port.

BITMT-25281Black Steel, 5" medium port mouth . 6-1/2" Brass trimmed cheeks.

BIT MT-25285Black Steel, 5" Copper wire wrapped snaffle mouth, 6" cheeks.

BITMT-25290Black Steel, 5" high port mouth with Copper wire wrap, 9 " cheeks.

CORRECTION BITMT-25293Black Steel, 5" Copper wire wrapped correction bit. 6" cheeks.

BITMT-25294Black Steel 5" 3-piece snaffle mouth. 6" cheek.

CORRECTION BITMT-25296Black Steel, 5" correction bit with Copper rollers. 8" cheeks.

BITMT-25313Chrome plated, 6-1/2" Cheeks, 5" Copper Mouth.

LIFE SAVER BITMT-25277-1Shank snaffle black steel lifesaver bit, 5” copper wire wrap mouth, 6” cheek.

LIFESAVER BITMT-25277Black Steel Lifesaver bit, 8” cheek, 5” copper wire wrapped mouth.

BITMT-25278Black steel correction bit, brass inlay. 72" cheeks. 5" mouth.

BITMT-25279Black Steel, 5" snaffle mouth, 6" cheeks.

1-800-654-8547111

Bits

BITMT-25385Chrome plated malleable iron, 6" cheeks, 5" Copper mouth.

BITMT-25432Black Steel 5" Snaffle Mouth with Copper Inlay, Stainless Steel/Black Steel 6-1/2" Loose Cheeks.

BITMT-25510-6Performer stainless steel brushed medium transition bit, 5” mouth with 3-piece copper wire wrapped link, 6-3/4” cheeks.

BITMT-25512Stainless Steel, 5" mouth, 6-1/2" cheeks.

BITMT-25512-55" Stainless Steel and Copper roller mouth, 6-1/2" cheeks. Stainless Steel.

BITMT-25513Stainless Steel, 5" Copper mouth, 6-1/2" cheeks.

FULL CHEEK SNAFFLEMT-25516Stainless Steel, 5" mouth.

BITMT-25526Stainless Steel 5" Argentine mouth, 6" cheeks.

RING SNAFFLEMT-25314Chrome plated mule bit, 6-1/2" chainsaw mouth, 2-1/2" rings.

DEE BITMT-25344Chrome plated 5-1/4" mouth. 3-1/8" dees.

DEE BITMT-25345Chrome plated 5" rubber covered mouth, 2-7/8" dee.

BITMT-25353Chrome plated 5" medium port mouth, 6-1/2" cheeks.

1-800-654-8547112

Bits

BITMT-25526-1Stainless Steel 5" Copper snaffle mouth, 6" cheeks.

BITMT-25528-9Stainless Steel, 5" Sweet Iron Medium Port "C" bit, 6" cheeks

BITMT-25531-4Stainless Steel Mattie gag with 5" Copper sawchain mouth. 6" cheeks.

BITMT-25531-5Stainless Steel Mattie gag with 5" sweet iron chain mouth. 6" cheeks.

EGGBUTT SNAFFLEMT-25534Stainless steel, 5" snaffle mouth, 2-3/4" rings.

BITMT-25539Stainless Steel 5" snaffle mouth with Copper roller. 8-1/2" cheeks.

DEE BITMT-25544Stainless Steel 5” mouth, 2-7/8” dee.

BITMT-25510-8Performer stainless steel brushed small transition bit, 5” hinged port mouth with copper roller and copper inlays, 7-1/2” “S” shank with dots.

BITMT-25511Stainless Steel 5" mouth, 6" cheeks.

BITMT-25511-2Performer stainless steel brushed chain bit, 5” mouthpiece with big links and two rubber keepers, 8-1/2” “S” shank.

TRAINING BITMT-25511-9Stainless Steel, 4-3/4" mouth, 6-1/2" cheeks

TRAINING BITMT-25511-6Stainless steel light weight training bit with 5-3/4” jointed mouth and 6-1/2” cheeks.

1-800-654-8547113

Bits

RING SNAFFLEMT-25551-5Stainless Steel, 5” Sweet Iron curved snaffle mouth, 3” rings.

RING SNAFFLEMT-25551-7Stainless Steel, 5” Copper snaffle mouth, 3” rings.

RING SNAFFLEMT-25551-8Stainless Steel, 5" small twisted wire sweet iron mouth, 3" rings.

RING SNAFFLEMT-25551-9Stainless Steel ring snaffle, 3" ring, 5" sweet iron mouth.

BITMT-25552-5Stainless Steel, 5-1/4" Sweet Iron chain mouth, 7" cheeks.

BITMT-25551-1Stainless steel ring snaffle, 5” offset double twisted copper wire mouth, 3” beveled flat rings.

BITMT-25551-2Stainless steel 5" single twisted copper wire mouth, 3" flat rings.

DEE BITMT-25545Stainless steel 5” mouth, 2-7/8” dee.

BITMT-25544-7Stainless Steel racing Dee, 5" rubber mouth snaffle, 2-7/8" Dees.

DEE BITMT-25545-1 Stainless Steel, 5” rubber covered mouth, 2-7/8” dee.

BITMT-25545-6Stainless Steel, 5" triangular shaped snaffle mouth, 3" rings.

BITMT-25550-9Stainless Steel, 5" three piece mouth with tongue depressor, 2-1/2" rings.

1-800-654-8547114

Bits

RING SNAFFLEMT-25574-6Stainless Steel, 5" sweet iron mouth. 3" beveled rings.

DEXTER RING BITMT-25575-5Stainless Steel, 4-3/4" Dexter ring bit.

BITMT-25575-9Stainless Steel, 5" sweet iron twisted wire snaffle mouth. 7-1/2" cheeks.

BITMT-25576Stainless steel, 5" sweet iron snaffle mouth, 7-1/2" Wonder Gag cheeks.

BITMT-25576-1Stainless Steel, 5" sweet iron combination mouth with 7-1/2" Wonder Gag cheeks.

BITMT-25576-6Stainless Steel 5" Copper twisted wire snaffle mouth, 7" cheeks.

RING SNAFFLEMT-25574-5Black Steel, 5" snaffle mouth with Copper inlay. 3" rings.

DEE BITMT-25554Stainless Steel 5" Copper wire wrapped mouth. 2-1/2" dees.

DEE BITMT-25555Stainless Steel, 5" Stainless Steel and Copper roller mouth, 2-1/2" dees.

HUNTING GAG SNAFFLEMT-25556Stainless Steel 5" hunting gag snaffle mouth, 2-3/4" half rings.

BLACK STEEL CAVALRY BITMT-25566-35-1/4" low port mouth with US Cavalry brass concho. 8-1/4" cheeks.

DEE BITMT-25567Stainless Steel, 5" Copper mouth, 2-7/8" dees.

1-800-654-8547115

Bits

CORRECTION BITMT-25584-2Stainle s s Stee l, 5" Copper correction bit. 9-1/2" cheeks.

BITMT-25585Stainless Steel with 6" cheeks, 5" Copper mouth.

BITMT-25635Stainless steel, 5” sweet iron mouth with 9” cheeks.

BITMT-25635-1Stainless Steel, 5" Sweet Iron mouth with 7" cheeks.

BITMT-25654Stainless Steel 5" medium port mouth with Copper roller, 9" loose cheeks, slobber bar.

BITMT-25681Stainless Steel, 5" 3-piece snaffle mouth with sliding Copper roller, 6" cheeks.

CORRECTION BITMT-25583-5Stainless Steel correction bit with 5" Copper/Stainless Steel mouth, 6" cheeks.

BITMT-25580Stainless Steel Bit with 5" Mouth, 7" Flat Cheek with Design.

BITMT-25580-3Stainless Steel, 5" medium port Copper Mouth, 6" Cheeks.

BITMT-25580-6Stainless Steel, 5" medium port Copper mouth. 6" Brass trimmed cheeks.

CORRECTION BITMT-25583-2Stainless Steel 5", correction mouth with Copper rollers. 9" cheeks with conchos. Brass trim.

CORRECTION BITMT-25583-4Stainless Steel correction bit with 5" Copper/Stainless Steel mouth. 7-1/4" cheeks.

1-800-654-8547116

Bits

GRAZING BITMT-26112Aluminum, 5" sweet iron low port mouth with copper inlay, 8" loose cheek.

ALUMINUM SNAFFLE BITMT-26113Aluminum, 5" sweet iron snaffle mouth with copper inlay, 8" loose cheek.

LOOSE CHEEK SNAFFLE BITMT-26201-2Black satin loose cheek snaffle. 6 2" shank. Jointed snaffle mouth permits either side of the bit to rotate freely. 5" stainless steel mouth with copper inlay.

BITMT-26310-4Black satin “C” bit with spots. 5” polished steel low por t mouth. 6-1/2” cheeks.

BITMT-26310-5Black satin bit with copper roller, polished steel mouthpiece. 4 3/4" mouth, 7" cheeks.

BITMT-26313-8Black satin bit with copper roller link, 8-1/2" S-cheeks with silver trim and dots.

ANTIQUE LOW PORT HINGED FUTURITY BITMT-25760-45" Sweet Iron curved and ported mouthpiece, copper inlays, SS brushed barrels, 5-1/2" antique short shanks with 3 SS dots.

BITMT-25684Stainless Steel 5" swivel port mouth with roller, 6-1/2" cheeks.

BITMT-25689Stainless Steel, 5" 3-piece snaffle mouth with sliding Copper roller. 6-3/4" cheeks.

BITMT-25732-1FG SS brush smooth correction bit, 5” mouth with copper barrels, 8-1/4” S-shank with silver trim and dots.

BIT, ALUMINUMMT-25732-5Precision spring system, 5" high port mouth, 8-1/4" aluminum engraved cheeks with conchos.

ALUMINUM MEDIUM PORT CURVED BITMT-25732-25" Sweet Iron mouth, copper inlay, 8-3/4" engraved aluminum cheeks.

1-800-654-8547117

Bits

ANTIQUE WESTERN DEE BITMT-26811Antique Western Dee bit. 5" copper inlay snaf fle mouth. Engraved German Silver trim.

ANTIQUE WESTERN DEE BITMT-26875Antique bit with 5-1/4" snaffle mouth, Ranger Star concho.

BIT, CORRECTIONMT-26979-5Black satin medium solid C-port correction bit, 5" mouth with inlay and copper barrels, 8" S shanks with flat stainless steel trim and dots.

BITMT-27003-0Stainless steel 5" Frazier side pull bit, rope noseband, quick link chain.

BITMT-27005-0Stainless Steel Upside Down Bit, 6" cheeks, quick link chain.

CORRECTION BITMT-26876-5Antique low articulated correction bit with 5" low port mouth with copper roller. 8" "S" shanks with flat stainless steel trim and dots.

BITMT-26623Rubber mouth dee with adjustable mouthpiece from 4-3/8” to 5-1/4”, stainless steel.

ADJUSTA TRAINING BITMT-26421Mouthpiece adjusts from 4-1/2” to 5-1/2”, stainless steel copper roller, 8” cheeks.

GAG SNAFFLE WITH HEADSTALLMT-26600Black steel, 5" sweet iron snaffle sliding gag, on headstall.

GAG SNAFFLE WITH HEADSTALLMT-26601Black steel, 5" twisted wire snaffle sliding gag, on headstall.

BIT, TRAININGMT-26313-6Black satin training bit, 5" medium port with copper barrel, 8" cheeks with silver trim and dots.

ADJUSTA GAGMT-26668Mouthpiece adjusts from 4-3/4” to 5-1/2”, continental 3-ring gag style, stainless steel.

1-800-654-8547118

Bits

ENGRAVED SNAFFLE BITMT-27100-9"Gunsmoke Collection" snaffle bit with German silver engraved 8" shanks. Polished steel 5" snaffle mouth with copper inlay.

HACKAMOREMT-27101-7German silver hackamore, braided rawhide covered noseband, 8-1/2" engraved silver trim on flat cheeks.

HACKAMOREMT-27101-9Stainless steel hackamore, rawhide covered bike chain noseband, 8-1/2” stainless steel cheeks.

BITMT-27113Antique chain bit, 5” mouth with big linked chain and rubber keepers, 8” cheeks with floral pattern, engraved silver and dots.

THE “ORIGINAL”MT-27200-1Antique with engraved G.S. silver, 5” sweet iron mouthpiece, medium high spooned port with copper roller and copper inlays. 7-1/4” shank with “Swivel Free System”. All-around bit for broke horses. Helps develop a softer mouth on horses that have gone “cold in the jaw”.

THE “GLOBE”MT-27200-2Antique with engraved G.S. silver, star and dots. 5” sweet iron mouthpiece with open medium port with copper inlays. 6-1/2” shank with “Swivel Free System”. Versatile bit for a variety of horses.

“GUNSMOKE COLLECTION” CORRECTION BITMT-27100-6“Gunsmoke Collection” correction bit with dots. 7 ¾” shanks. Polished steel mouth with copper inlay.

BITMT-27006Warner type hackamore, rope nose. Nose swivels for better flex plus it floats when you pull the shanks, but will not drop down.

BITMT-27008Stainless steel 5” draw gag bit, twisted wire mouth.

BLACK SATIN HINGED PORT BITMT-27010-45” hinged port mouth with copper roller and copper inlays. 8” S-shank with dots.

BITMT-27013Black steel short shank lifter bit, bradoon mouth.

BITMT-27015Black steel 5" cheek gag bit, copper wire wrapped mouth.

1-800-654-8547119

Bits

THE “COWBOY” KIMBERWICKMT-27200-8Stainless steel. 5” sweet iron mouthpiece with low port. A versatile bit with many different settings for leverage. Especially well suited for horses with a “harder” mouth. “Swivel Free System” provides a more positive feel for both horse and rider.

THE “REMUDA”MT-27200-9Antique with stainless steel rope. 5” sweet iron “dog bone spoon” broken mouthpiece with copper ring and inlays. 8-1/2” shank with “Swivel Free System”. A great all-around bit for young horses who have already been introduced to leverage or for broke horses that do not require a lot of port in the mouth.

THE “LOW LEVERAGE HINGED PORT”MT-27201Antique with engraved G.S. silver and dots. 5” sweet iron medium port articulated mouth with copper inlays. 7” shank with “Swivel Free System”. A specialized bit that isolates individually the shoulders of a broke horse. This bit also prevents the “over-tuck” effect. Great for performance horses.

THE PELHAMMT-27201-2Stainless steel. 5” snaffle jointed mouthpiece. 5” cheeks with flat curb chain. “Swivel Free System” provides a more positive feel for both horse and rider.

GOODWATER “UNO” BITLow Leverage SeriesMT-27201-4Antique with engraved German Silver and dots. 5-1/8” sweet iron mouthpiece. Spooned medium port with copper roller and copper inlays. 7” shank with “Swivel Free System”.

GOODWATER “CORRECTIONAL” BITLow Leverage SeriesMT-27201-6Antique with engraved German Silver and dots. 5-1/8” sweet iron mouthpiece. Smooth correctional port with copper barrels. 7” shank with “Swivel Free System”.

GOODWATER “FLAT SPOON” BITLow Leverage SeriesMT-27201-7Antique with engraved German Silver and dots. 5-1/8” sweet iron mouthpiece. Flat spoon port with copper inlays. 6-1/2” shank with “Swivel Free System”.

GOODWATER “DOG BONE” BITLow Leverage SeriesMT-27201-8Antique with engraved German Silver and dots. 5-1/8” sweet iron 3-piece mouthpiece with copper ring and copper inlays. 7” shank with “Swivel Free System”.

THE “ARGENTINE”MT-27200-3Antique with stainless steel dots. 5” sweet iron 3-pieces broken mouthpiece with 4 copper rings and inlays. 5-1/2” shank with “Swivel Free System”. A very good bit for introducing green horses to leverage. The broken mouth allows tongue relief.

THE “LONG DEE”MT-27200-4Antique with engraved G.S. silver and dots. 5” sweet iron Correction mouthpiece with copper covered port and inlays. 8” shank with “Swivel Free System”. Works well for a variety of broke horses, a great tool for correcting bad habits.

THE “SHORT DEE”MT-27200-5Antique with engraved G.S. silver and dots. 5” sweet iron “dog bone spoon” broken mouthpiece with copper ring and inlays. 6-3/4” shank with “Swivel Free System”. Excellent for introducing green horses to leverage. Helps develop the mouth of a young horse. Has a lot of tongue relief.

RUBBER BIT GUARD MT-244193-1/2” diameter, Pair.

NEOPRENE BIT GUARDWITH VELCRO CLOSUREMT-24419-5 2-3/4” diameter, pair. Assorted colors.

1-800-654-8547120

“CT Bits” are designed exclusively for Chem Tac by legendary bit maker Bob Brandon, formerly with the original Trammell

Bit Company. Each bit has a usage description on the attached tag and is made in the USA with a lifetime guarantee.

RING SNAFFLE W/ CHAINCT-10203/8” copper bars with chain center, 3” rings and 5” mouth. The ring snaffle is a low leverage bit. Traditionally used to break a colt, school a horse, or trail and pleasure ride on a well broke horse. This bit is about the mouthpiece. First, the sweet iron and copper creates lots of moisture for a soft mouth. The chain section puts some light tongue pressure for headset and allows the copper bars to break over at the horses bars for more leverage by contacting new nerves for good control. This bit’s strong suit is schooling a horse.

BARREL GAG W/ CHAINCT-1040Large twist iron chain, 6” cheeks and 5” mouth. This bit is designed to provide flex. This mouthpiece may look severe but is actually gentle on the mouth because it conforms well and distributes the pressure across the mouth and tongue. Excellent for a horse that has a lot of natural rate. It’s also a good choice for a rider that has heavy hands during the heat of an event.

TRAINING GAGCT-10503-piece twisted sweet iron snaffle, 5” cheek and 5” mouth. This is a great little bit that has crossed over to a lot of events. The short gag action helps to collect a horse and gives a little notice that something is about to happen. It’s great to introduce curb pressure to a colt, has lots of flex and, for a 5” cheek, has good rate and control. Perfect for trail or pleasure riding on a well broke horse.

STEEL ROPERCT-1060Ported sweet iron chain mouth, 6” cheeks and 5” mouth. A very popular bit amongst team ropers and barrel racers. A medium leveraged bit that is attractive and very well balanced. This mouthpiece uses very light tongue pressure to que your horse and it uses more bar pressure than a straight chain mouth for better control.

BARREL GAG W/ DOG BONECT-10303-piece twisted snaffle, 6” cheeks and 5” mouth. This bit will surprise you. It is all about flex and rate. It must be ridden with a medium or tight curb. A tight curb will set the bit faster for more flex and less rate. A medium curb allows the bit to gag more, adding to the rate and control and has less flex. This mouthpiece adds some bite to double the effectiveness of the bit.

TEAM ROPERCT-1070Sweet iron spiral snaffle, 7” cheeks and 5” mouth. A very nice looking, well balanced and pinchless bit. This bit has crossed over to every discipline in western riding. It has a long purchase for fast response and a 4” shank for good control. The spiral snaffle adds just enough bite to give this 7” cheek good control.

RING SNAFFLECT-10107/16” smooth sweet iron snaffle, 3” rings and 5” mouth. The ring snaffle is a low leverage bit. Traditionally used to break a colt, school a horse, or perfect everyday ride on a well broke horse. The heavy ring adds more feel for the horse, i.e. better training or schooling. The larger smooth snaffle is softer on the mouth making this bit perfect for breaking a colt. Good for schooling a horse and excellent for pleasure riding on a well broke horse.

Bits

1-800-654-8547121

J.W. ROPE NOSE HACKAMORECT-1130This is a very well designed hackamore. Medium plus leverage for good control. The rope nose is the most popular nose for control. There are no knots to gall a horse’s face. The nose floats when you rotate the cheeks to keep the correct contact on the horse. This hackamore allows for lots of flex.

BARREL HORSE GAGCT-1080Smooth sweet iron snaffle, 9” cheeks and 5” mouth. This bit is designed for competition. The small amount of gag collects your horse and adds suppleness. You can adjust the severity of the bit by adjusting the length of the curb chain. Lots of control, flex and rate. Enough leverage for a youth rider.

BARREL BIT W/ LIFESAVERCT-1100Loose lifesaver mouth, 6-1/2” cheeks and 5” mouth. This is a competition bit for the finished horse. A medium leveraged bit but the short gag action lets the mouth move a little to que your horse. Then the curb set adds leverage to the bit. The loose lifesaver mouth gives some tongue pressure and also ques your horse to bit movement for a faster response.

COMBINATION HACKAMORECT-1110Bicycle chain and rubber nose. The combination hackamore is designed to work on all the pressure points instead of just two or three. The tighter the curb, the more nose pressure is exerted. Loosen the curb to add gag action on the mouth. The loose lifesaver mouth adds some tongue pressure for headset and better rate. Start with a looser curb, 3-4 fingers, to introduce this bit. Then tighten until you reach the best for your horse.

LOOSE SEVENCT-1120Low port correction. This bit is designed for a horse that likes to lip the bit. It has good leverage when ridden with a tight curb. Loose cheeks for better lateral movement. The correction mouth sets on the tongue until the reins are contacted, then rotates away from the tongue to que your horse for a faster response. The three piece action adds some bite for better control.

BARREL HORSE GAG W/ CHAINCT-1090Large chain mouth, 9” cheeks and 5” mouth. This bit is designed for competition. The small amount of gag collects your horse and adds suppleness. You can adjust the severity of the bit by adjusting the length of the curb chain. This bit crosses over to all disciplines. It has lots of control, flex and rate. Enough leverage for a youth rider. The chain mouth is the most forgiving, adding more flex. Good rate but less whoa.

Bits

1-800-654-8547122

Spurs

FUNCTION OF THE SPUR

Contrary to popular belief, spurs are not designed to make a horse go fast. Spurs are intended for delivering point-contact pressure to a horse’s midsection. This allows the rider to guide a horse from side to side and to enhance flexure that a horse naturally exhibits through its ribcage and along its profile. If you want excellent lateral motion, lightness on the front quarters, spin and great rollbacks, spurs can be a tremendous aid. If you simply want your horse to go faster, spurs are not the solution. We recommend that you do not use spurs until your trainer suggests their use, or until you develop sufficient leg control, so you will not accidentally bump the horse.

THE SPUR

SHANKS - The spur’s shank ranges in length from 1/4” to 2-3/4”. The length of shank is a main factor when choosing a spur; its length depends on your level of skill and riding style.

ROWELS - Rowels come in all sizes, with a variety of points. The number of points doesn’t change the effect of the spur as much as whether the points are smooth, blunt or harp. Smooth and blunt are less likely to hurt your horse, and therefore, usually the best choice for horsemen. Remember, soft point pressure is the object.

BANDS - The spur band fits on the heel of the boot. Band choice is a matter of personal preference.

JINGLE BOBS - These imitate the old vaquero jingle-noise. These are for decoration and sound only.

CHAP GUARDS - The guards prevent chaps from becoming tangled in the rowel.

BUTTONS - This is where the spur straps attach.

HOW TO WEAR SPURS

The spur is worn on the heel of the boot with the sides level (not angling up or down). The curve of the shank should point down. On western boots, the spur rests above the heel of the boot; on English boots, the spur rests above the spur stop or along the upper stitching. Spur straps are buckled to the outside, and the straps should be tucked in or cut off.

TO SPUR OR NOT TO SPURCHOOSING THE RIGHT SPUR:

CHOOSING A SPUR

The less-experienced rider should start with a short shank (1-1/2”) and smooth, blunt rowels. This combination will require conscious effort on the rider’s part to make sure that the spur only makes contact when the rider wants it. This eliminates the chance of raking the horse with the spur by mistake. More experienced riders, with an awareness of where their feet are, may move to a longer shank (2”) with a 10 point rowel. The effort required for contact is much less than with a short shank, and the range of pressure is expanded. The key factor is in the movement of the rib cage. A longer shank will permit the rider to guide the horse’s midsection at a variety of gaits, with a minimum of leg pressure. For high-performance requirements, such as cutting or working cowhorses, you may want a slightly larger rowel, permitting a rolling motion along the ribcage. Remember, a slight rolling motion of the rider’s foot will deliver all the pressure necessary, provided the rowel and shank are the appropriate size. If you ride English, soft point contact is the key. The benefits of soft contact are many, as the horse will begin to focus more on the job in front of him, instead of worrying about the sharp metal attached to the rider. Western pleasure riders may want to try a spur with fancy trim and a larger rowel. Since show spurs are mainly for appearance, the addition of silver trim and long points on the rowels will enhance the appearance of the rider. Note that large rowels can be cumbersome and get in the way. Your horse will be quick to remind you if you forget where your feet are! Finally, if you are into rough stock, you will probably want a long shank (2”+) with a five point notched rowel. Bulls have tougher hides than horses, so the rider can be a little less concerned about where they spur. The emphasis here is on being able to rake the animal’s shoulder in a visible manner so the judges can get a good look. If you’re riding bucking horses, the long shank is still a necessity, but you may back off to a 5 point flat-end rowel, given that your mount is already airborne. We feel the key is to find the spur that provides the best possible result with the least amount of pressure. You may have to start with something the horse definitely feels, but don’t be afraid to back off once he gets the idea. You’ll find that your horse will begin to anticipate point contact at particular maneuvers, so as you and the horse progress, you might be able to graduate to a much gentler and smaller spur. The objective is to help your horse achieve what you want as a rider, through lots of practice and patience. The spur should be used sparingly and only when needed. Spurs look and feel great when you have them on, but the best part about spurs is knowing when to leave them off. We believe that spurs do not have to be big and sharp to get the best performance out of your horse. Rather, they simply have to be sized to get the job done, and most importantly, worn and used correctly by the rider.

1-800-654-8547123

Spurs

ANTIQUE STARS AND DOTS SPURMT-23610-91/2” band, 1-1/4”shank and 7/8” 10 point rowel.

ANTIQUE COMANCHERO SPURMT-23611-21/2” band, 1-1/4” shank and 7/8” 10 point rowel.

SPURMT-23611-5Black satin spurs with floral overlay and three dots, ¾” band, 1” shank with chap guard and 5/8” rowels.

SPURMT-23612-5Men’s black satin floral engraved with cross concho spurs. 1-1/2” band and 2-1/2” shank. 8 point rowel.

BLACK SATIN SPURMT-23615-5Silver arrows trim, 3/4" band, 1-1/2" shank with chap guard, 1-1/16" 8-point rowel.

SPURMT-23702 Men'sAntique spur with GS trim cut out, 3/4" band, 1-1/2" shank with chap guard, 1-1/16" 8-point rowel.

SPURMT-23702-1 Ladies'Antique spur with GS trim cut out, 5/8" band, 1-3/8" shank with chap guard, 1-1/16" 8-point rowel.

SPURMT-23707-1Antique spur with floral copper and brass trim, 1" band, 2-1/8" shank, 6-point rowel.

SPUR, "MARGARITA"MT-23707-4Antique spur with half pinwheel decoration and engraved GS trim, 3/4" band, 2" shank with chap guard, 1-3/16" 16-point rowel.

SPUR, ENGRAVED BUCKHORNSMT-23710Antique finish with 1-1/4" band, 2-1/8" shank with chap guard, 16-point rowel with jingle bobs.

SPURMT-23710-1Antique finish with three stars and rope edge GS trim, 1" band, 2" shank, clover leaf rowel.

ANTIQUE CHILI PEPPER SPURMT-236151” band, 2-3/8” shank, 16 point rowel.

SPURMT-23714Black satin reversible floral GS trim, 1/2" band, 2" shank with chap guard, 1" 8-point rowel.

SPUR, "POKER"MT-23715-5Antique finish with poker card trim, 3/4" band, 1-1/2" shank, 1" 8-point rowel.

ANTIQUE LADIES SPUR WITH RHINESTONESMT-23780-4 ClearMT-23780-5 PinkMT-23780-6 BlueAntique Comanchero spurs with rhinestones. 1/2” band, 1-1/4” shank, 7/8” 10-point rowel

SPUR, LADIES ANTIQUE STARS & DOTSMT-23780-11/2" band and 1-1/4" shank with blue rhinestones.

1-800-654-8547124

Spurs

TODDLER SPURMT-24894-7Black satin toddler spur with engraved German Silver trim. 5/8" band, 1" shank. Great looking spur for that special “Future Cowboy”.

SPUR, OFFSET ROPINGMT-25020-1Standard antique offset roping spur, 3/4" band with diamond and dots, 1-1/2" offset shank, 8-point rowel, oval and flared out cup.

MEN’S SPURMT-25626Stainless Steel 21st Century spur, 3" shank, 1-1/2" band. Knob end.

HUMANE SPURMT-25628 Ladies’Stainless Steel 21st Century spur, 3/4" band, 1" shank. Knob end.

SPURMT-25629Stainless Steel, 21st Century spur, 1-1/2" shank, 3/4" band, Knob end.

SHOW SPUR, ROPING MOTIF, OFFSETMT-25020-4Antique offset roping motif show spurs. 1” band with full trim motif, diamonds and dots. 1-1/2” offset shank with 8-point rowel. Oval and flared out cup for comfortable fit.

ANTIQUE BROWN LONHORN SPURMT-23843-5Oval cup, 3/4” band with full stainless steel trim, hand engraved. 1-1/2” shank with chap guard, 10-point rowel.

SPURMT-25677 Men’sStainless Steel men’s spur with German Silver engraved trim, 2" shank, 1" band and 6 point rowel.

SHOW SPURMT-25735-1 Men'sStainless Steel roping spur, German Silver engraved overlay.

SHOW SPURMT-25737-3Black Steel with German Silver engraved tr im chap guards, jinglebob, 2-1/4" shank, 1" band, 1-3/4" 16 point rowel.

SPURMT-25755-1Black Steel ladies’ spur with German Silver engraved trim, 1-1/2" shank, 3/4" band, 10 point rowel.

SPUR, ROPINGMT-25739 Ladies'Black steel with GS trim bars, 3/4" band, 9-point rowel.

SPUR, “ROCK GRINDER”MT-25736-8Brushed Stainless Steel with deeply engraved full GS trim, 1-3/8” band, 2-1/4” gooseneck shank with dots, 1-1/4” 16-point “Rock Grinder” rowel.

SPURMT-25755Black Steel men=s spur with German Silver engraved trim, 1-3/4” shank, 1” band, 10 point rowel.

SPUR WITH LEAF DESIGNMT-24091-4Antique men’s spur with decorative leaf scrolling, 7/8” band and 2” shank.

SPUR WITH STEER HEADMT-24091-6Antique men’s spur with engraved steer head inlay, ¾” band and 1-1/2” shank. Excellent workmanship.

1-800-654-8547125

SHOW SPURMT-25797Black Steel with German Silver engraved trim, 2" shank, 1" band, sawtooth rowel.

YOUTH SPURMT-25797-1Black Steel, with German Silver engraved conchos and trim. 1-3/8" shank, 1/2" band. 9 point rowel.

SPURMT-25774Stainless Steel men’s spur, 1-5/8" shank, 3/4" band, 6 point rowel.

Spurs

YOUTH SPURMT-25798Black Steel with German Silver engraved trim. 1-3/8" shank, 1/2" band, 10 point rowel.

YOUTH SPURMT-25798-1Black Steel, 1/2" plain band, 1-3/8" shank, 10 point rowel.

SHOW SPURMT-25799Black Steel with German Silver engraved trim chap guards, jinglebob, 2-1/4" shank, 3/4" band, 1-3/4", 16 point rowel.

RODEO SPUR, 30˚ OffsetMT-25801-4 Black Steel, 30˚ offset bull spur, 2-1/2" shank, 1" band, 5 point notched rowel.

RODEO SPUR, 15° OffsetMT-25802-2Black Steel, 15° offset bull spur, 2-1/4" shank, 1" band, 5 point notched rowel.

RODEO SPUR, 22-1/2° OffsetMT-25802-3 Black Steel, 22-1/2° Bull Spur, 2-1/2" Shank, 1" Band, 5 point notched rowel.

ROPING SPURMT-25802-5 Men'sBlack Steel with Brass engraved trim, 2" shank, 1/2" band, 10 point rowel.

MEN’S ROPING SPURMT-25803Stainless Steel, plain band, 2" shank, 3/4" band, 10 point rowel.

YOUTH BULL SPURMT-25803-2Black steel youth bull spurs with 15 degree offset, 1" band.

SPURMT-25803-5Black Steel Spur, 2 " Shank, Jinglebobs, 1/2" Plain Band, 1-3/4" Nickel Plated Rowel.

SPURMT-25803-8Midnight Silver Spur with Brass Engraved Trim, 1" Band, 2" Shank, 10 point Rowel.

ALL AROUND SPURMT-25805Stainless Steel plain band, 2" shank, 3/4" band, 9 point rowel.

YOUTH SPUR, Chrome PlatedMT-25814Engraved band, 1-1/4" shank, 1/2" band, 10 point rowel.

YOUTH BULL SPURMT-25803-3Black steel youth bull spurs with 22-1/2 degree offset, 1” band.

1-800-654-8547126

Spurs

ROPING SPURMT-25819-3 Men'sStainless Steel, plain band. 1-3/4" shank, 5/8" band, rosebud rowel.

YOUTH ROPING SPURMT-25819-5Stainless Steel plain band, 1-3/4" shank, 5/8" band, rosebud rowel.

ROPING SPURMT-25819-4 Ladies'Stainless Steel, plain band. 1-3/4" shank, 5/8" band, rosebud rowel.

SPUR, ROPERMT-25819-8Stainless steel roper spur, 3/4" band, 1" shank, 3/4" rosebud rowel.

ROPING SPURMT-25831 Men'sStainless Steel with plain band. 1-3/4" shank, 1/2" band, 10 poiht rowel.

ROPING SPURMT-25832 Ladies'Stainless Steel with plain band. 1-3/4" shank, 1/2" band, 10 poiht rowel.

ROPING SPURMT-25831-1 Men’sChrome plated, plain band, 1-3/4" shank, 1/2" band, 10 point rowel.

SPUR, 3-CROSSESMT-25847-1Antique brown spur with 1-13/16” band, 2-1/2” shank and 9-point 1-3/16” rowel. Silver trim with 3 brass crosses.

YOUTH SPUR, 3-CROSSESMT-25847-2Antique brown spur with 1” band, 1-5/8” shank and 9-point 1” rowel. Silver trim with 3 brass crosses.

TODDLER SPUR, 3-CROSSESMT-25847-3Antique brown spur with 1/2” band, 1” shank and rosebud rowel. Silver trim with 3 brass crosses.

ANTIQUE TEAM ROPER SPURMT-25848-9Antique Team Roper spur with 1" band, German Silver trim, 8 point blunt rowel.

SPURSMT-25849-6Antique spurs with silver trim with cut out stars, oval cup, 1-1/4” band and 2-1/2” shank. 9 point rowel.

SPURMT-25849-3 YouthAntique spur with engraved GS trim, longhorn motif and buttons, 10-point rowel.

ROPING SPURMT-25819 Men'sStainless, 1-3/4" shank, plain 1/2" band, rosebud rowel.

ROPING SPURMT-25819-1 Ladies'Stainless, 1-3/4" shank, plain 1/2" band, rosebud rowel.

YOUTH SPUR, Stainless SteelMT-25815Engraved band, 1-1/4" shank, 1/2" band, 10 point rowel.

1-800-654-8547127

BABY SPURMT-25849-8Baby spur features antique German Silver Trim with star cut outs and rowel.

ROPING SPURMT-25850Stainless Steel w/engraved band, 2" shank, 1/2" band, rosebud rowel.

Spurs

ROPING SPUR MT-25850-3Stainless Steel w/engraved band, 1-3/4" shank, 3/4" band, rosebud rowel.

LADIES’ ROPING SPURMT-25850-9Stainless Steel with rose engraved band, 1-1/4" shank, 1/2" band, 10 point rowel.

QUICK-ON SPURMT-25870-1Men’s chrome plated. 9-Point Blunt Tipped Rowel.

QUICK-ON SPURMT-25870-2High Quality Stainless Steel Spring Steel, 9-Point Blunt Tipped Rowel.

QUICK-ON SPURMT-25871-1Ladies’ chrome plated. 9-Point Blunt Tipped Rowel.

QUICK-ON SPURMT-25871-2Ladies’ High quality Stainless Steel Spring Steel, 9-Point Blunt Tipped Rowel.

QUICK-ON SPURMT-25875-2Ladies’ Stainless Steel. 3/4" Shank.

MT-25876-1 Men'sHigh quality Chrome plated Spring Steel, Offset Rowel.

MT-25877-1 Ladies'High quality Chrome plated Spring Steel, Offset Rowel.

BUMPER SPURMT-25878-1Black satin bumper spur with two rowels. 7/8" band.

BUMPER SPURMT-25878-2Black satin bumper spur without rowels. 7/8" band.

ALL AROUND SPURMT-25882-1Stainless Steel, plain band, 2" shank, 1" band, 10 point rowel.

ROPING SPURMT-25886 Men'sStainless Steel with twisted band, 1-3/4" shank, 1/2" band, 10 point rowel.

ROPING SPURMT-25886-1 Ladies'Stainless Steel with twisted band, 1-3/4" shank, 1/2" band, 10 point rowel.

1-800-654-8547128

Spurs

CUTTING SPURMT-25889Stainless Steel plain band, 2" shank, 3/4" band, 9 point rowel.

CUTTING SPURMT-25889-5Stainless Steel, men’s spur, plain band, 2-1/8" shank, 1" band, 14 point rowel.

CUTTING SPURMT-25889-6Stainless Steel men’s spur, plain band, 2-3/4" shank, 1" band, 14 point rowel.

LADIES HUMANE SPURMT-25894-1Black satin ladies 21st century spur. 5/8" band, 1 1/4" shank, knob end.

SPURMT-25912Stainless Steel men’s spur, 2-1/4" shank, 1" band, 10 point rowel.

BLACK CUTTER SPURMT-25922Black Steel 2-1/4" shank, 1-1/4" band, 8 point rowel.

BLACK SATIN ROPER SPURMT-25895-6With arrowhead trim, oval cup, 3/4" band, 1" shank and 3/4" rosebud rowel.

LONGHORN SPURMT-25924Mens Black Steel, German Silver trim, 2-1/4" shank, 1-1/4" band, 10 point rowel.

TODDLER SPURMT-25925-6Toddler’s spur with Southwestern motif, engraved German silver trim. Rosebud rowel.

LADIES ANTIQUE SPURMT-25924-5Ladies Ranger star concho. German silver engraved bars. Eight point rowel.

ANTIQUE SPURMT-25924-4Mens Ranger star concho. German silver engraved bars. Clover leaf rowel.

ANTIQUE SPURMT-25924-2Mens Antique spur with German silver engraved bucking horse and trim.

SPUR, "T" MT-25924-9 YouthAntique finish with GS bars, skull motif, 1/2" band, brass buttons and rowel.

BLACK CUTTING SPURMT-25923Black steel cutting spur, 1” band, 1-7/8” shank with black steel hanger and buttons. Flat end rowel.

CUTTING SPURMT-25887-4Stainless Steel with Brass trim. 2-3/4" shank, 1-1/4" band, 10 point rowel.

YOUTH ROPER SPURMT-25886-2Stainless Steel with twisted band, 1-3/4" shank, 1/2" band, 10 point rowel.

1-800-654-8547129

ROPER SPURMT-25931Stainless steel engraved roper spur, ¾” band, 1” shank and ¾” rosebud rowel.

TODDLER SPURMT-25952Chrome plated spur with 1/2” band, 1” shank and 10-point brass rowel.

Spurs

“GUNSMOKE COLLECTION” SPURMT-27100-3Gunsmoke colored all around spur. 7/8" band, 1 2" shank.

SPUR, LADIES’ TRAININGMT-26499-1Antique Rock Grinder training spurs with reining horse motif. 7/8" band with silver trim and rope. 2" shank and rock grinder rowel.

SPUR, MEN’S TRAININGMT-26499Antique Rock Grinder training spurs with reining horse motif. 1-1/4" band with silver trim and rope. 2-3/8" shank and rock grinder rowel.

SHOW SPURMT-26310-8Black satin mens show spur with engraved German silver trim. 1" band, 2 2" shank, 9 point rowel.

SPURSMT-27680-4 Men’sPerformer stainless steel brushed All Around Spur, oval cup, 2-1/8” shank, 1” band and 10 point blunted rowel.

SPURSMT-27680-5 Ladies’Performer stainless steel brushed All Around Spur, oval cup, 2-1/8” shank, 1” band and 10 point blunted rowel.

“GUNSMOKE COLLECTION” REINER SPURMT-27101Gunsmoke colored reiner spur with engraved German silver trim. 1 1/4" band, 2" shank.

JINGLE BOB SETMT-25801-2Includes 4 jingle bobs, 2 keyrings, 2 pins and 2 spur pins. Black.

SPUR PINS, 10/pkgMT-25839-7 BrassMT-25839-8 Black steelMT-25839-9 Nickel plated

SPUR COTTER PINSMT-25839-5 100/pkg

LONGHORN SPURMT-28110-1Stainless steel trim over antique brown spur, 3/4” band with 1-3/4” shank, 10-point 1” blunt tip rowel.

SILVER TRIM PINWHEEL SPURMT-28110-3Antique brown spur with pinwheel and filigree stainless steel trim, 3/4” band, 1-3/4” shank and 8-point nail head rowel.

YOUTH SPURMT-25961Antique brown youth spur with silver trim and dots, 3/4” band, 1” 10-point rowel.

SPUR, LADIESMT-28020Ladies antique concave 1” band with barrel racing motif and trims. 1-3/8” shank with 7/8” 16-point rowel. Oval cup.

1-800-654-8547130

Rowels

ROWEL CARDMT-258409 pair assorted solid Brass rowels from 7/8" to 1-1/4" in diameter.

SOLID BRASS ROWELMT-25840-21" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-17/8" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-41-1/16" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-51-1/16" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-61-1/16" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-71-1/4" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-81" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25840-91-1/4" diameter. 10 pair per package.

ROWEL CARDMT-2584118 pair assorted solid Brass rowels from 5/8" to 3/4" in diameter.

ROWEL CARDMT-258429 pair, assorted black rowels from 7/8" to 2-3/16" in diameter.

SOLID BRASS ROWELMT-25841-13/4" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25841-35/8" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25841-43/4" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25841-55/8" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25841-73/4" diameter. 10 pair per package.

SOLID BRASS ROWELMT-25841-93/4" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-17/8" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-21-1/16" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-31-1/4" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-41" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-52-3/16" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-61-3/16" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-71" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-81-1/4" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25842-91-1/2" diameter. 10 pair per package.

1-800-654-8547131

Rowels

ANTIQUE ROWEL CARDMT-25843Features nine pairs of assorted rowels with pins. 1" to 1-5/8".

BLACK STEEL ROWELMT-25843-11-1/4" diameter. 5 points. 10 pair per package.

STEEL ROWEL “OILED”MT-25843-2Oiled, no plating. 1-1/2" diameter. 16 points. 10 pair per package.

BLACK STEEL ROWELMT-25843-55/8" diameter. 5 points. 10 pair per package.

BLACK STEEL ROWELMT-25843-63/4" diameter. 7 points. 10 pair per package.

BLACK STEEL CLOVERLEAF ROWELMT-258451-3/8" diameter. 10 pair per package.

BLACK STEEL CLOVERLEAF ROWELMT-25845-11-1/8" diameter. 10 pair per package.

BLACK STEEL ROWELMT-25845-21-1/4" diameter. 9 points. 10 pair per package.

BLACK STEEL ROWELMT-25845-31-3/16" diameter. 10 points. 10 pair per package.

BLACK STEEL ROWELMT-25845-41-1/4" diameter. 6 points. 10 pair per package.

BLACK STEEL ROWELMT-25845-51-1/4" diameter. 6 points. 10 pair per package.

BLACK STEEL ROWELMT-25845-61" diameter. 8 points. 10 pair per package.

BLACK STEEL ROWELMT-25845-71-5/8" diameter. 12 points. 12 pair per package.

BLACK STEEL ROWELMT-25845-81-1/2" diameter. 10 points. 10 pair per package.

HEEL STRAPSMT-13440 7" pairMT-13441 8" pairHeel strap to hold spurs in place. Made from 11/16" wide russet leather with slotted hole in each end.

SPUR TIE DOWNSMT-25800Spur tie downs, rubber. 12 pair per card.

SPUR RACKMT-25801Wood spur rack with velvet cover. 16” length. Will work horizontal or vertical.