blackberry casesmedia.brintex.com/occurrence/128/brochure/3836/brochure.pdf · a peter jones...
TRANSCRIPT
a peter jones technologywww.peterjonesilg.co.uk
BlackBerry Cases
SBBERRYILGKFFold up style, designed for the Curve 8300 range, that allows the device to be fully used whilst in the case. Also fi tted with magnet to put the device into sleep mode when closed.
This case has a Klick Fast stud on both sides to allow dashboard mounting as well as personal mounting.
SBBERRY83HOLKFDrop in pouch for the Curve 8300 range, with pull tongue, to help remove the terminal from the case when required. Case also has a magnet to place the device into sleep mode when in the case.
One Klick Fast stud on the back of the case.
SBBERRY83HOLYCANKF
SBBERRY9700 KF * Can also be made available for Bold 9700
SBBERRY83HOLCANKF
Fits 8300, 8310, 8320, 8900 Curve and 8700 Bold
SBBERRYBOLDKFFold up style, designed for the Bold 9000, that allows the device to be fully used whilst in the case. Case also fi tted with a magnet to put the device into sleep mode when closed.
One Klick Fast stud on the back of the case.
SBBCURVE8900FEKF *Fully enclosed protected style, designed for the Curve, that allows the device to be fully used whilst in the case. Case also fi tted with a magnet to put the device into sleep mode when closed.
One Klick Fast stud and twin D-rings on the back of the case.
SBBBOLD9700FEKF *Can also be made available for the Bold 9700
SBBERRY8900 KF *Fold up style, designed for the Curve 8900 range, that allows the device to be fully used whilst in the case. Also fi tted with magnet to put the device into sleep mode when closed.
One Klick Fast stud on the back of the case.* At the time of printing these cases were prototypes,
please call to check their current production status
All Peter Jones (ILG) Ltd cases are made from the best quality leather, press studs and binding. The company has been manufacturing leather products for over 40 years and, throughout this time, have produced innovative and top quality items, drawing from our vast knowledge base of the leathers and components that are best suited to meet different applications.
Also available inYellow Canvas and…
in Black Canvas
PDA and Printer Cases
SBROILGYP1KFCANAlso available in Yellow Canvas
SBROILGP1KFCANand Black Canvas
SHTC650HDSKF03Fold up style, designed for the HTC6500/XDA Mantle, that allows the device to be fully used whilst in the case. Case also comes with two loops to allow stylus to be fi tted into the fl ap.
One Klick Fast stud on the back of the case.
SABLE01KFFold up style, designed for the ABLE printer, that allows the device to be fully used whilst in the case.
One Klick Fast stud on the back of the case.
We can add a Lanyard to any case, please call
for details.
SPDAARGONKFFold up style, designed for the ARGON, that allows the device to be fully used whilst in the case. Case also comes with two loops to allow stylus to be fi tted into the fl ap.
SXDASTELLA01Fold up style, designed for
the XDA STELLA that allows the device to
be fully used whilst in the case.
SSYMBOLMC35KFDrop in pouch, designed for the Symbol MC35, with pull tongue to help remove the terminal from the case when required.
One Klick Fast stud on the back of the case.
SBROILGP1KFDrop in case for the Brother printer, where the printer is placed into the case upside down. Unlike designs by other companies that have an open bottom feed, which allows water ingression into the paper, this design allows an offi cer to simply lifts the fl ap back and pull the paper off when he is ready to print. The case also has a dock on the fl ap for PDA mounting.
Please Note: When receiving cases from suppliers other than Peter Jones ILG, which you have requested with Klick Fast fi tted, you have to make sure it has www.klickfast.com on the moulding.If it has not got www.klickfast.com on the moulding, it is not our product and will invalidate your warranty on other items within your force. If you are unsure in anyway please ask us, as this is our product.
This case has a Klick Fast stud on both sides to allow dashboard mounting as well as personal mounting. One Klick Fast stud on the back of the case.
a peter jones technologywww.peterjonesilg.co.uk
Klick Fast Carrying System Docks and AccessoriesRSM Tag DockPart Nº: DOCKRSMTAGFits into existing remote speaker mic tags on uniform
to give an instant Klick Fast mounting option for a
terminal.
Belt Loops for Utility BeltsPart Nº: DOCK 05 BL (to fi t 50mm Belt)DOCK 05 BLCN (to fi t 55mm Belt)Leather Belt Loop, available in 2 sizes to slide onto a
Utility Belt, which has a Dock05 riveted to the front for
attaching a PDA.
Under Arm HolsterPart Nº: SSHLDER 3 KFA slim, extremely comfortable leather harness which
allows a radio case to be docked out of sight under a
jacket. The under arm holster is fully adjustable, with
leather and elastic straps. (Case not included).
Radio Utility HarnessPart Nº: SSHLDER 14S (to fi t 50mm Belt)SSHLDER 14S D07 (to fi t up to 60mm Belt)This harness attaches to the Utility Belt via two
Klick Fast Docks and a loop. It allows PDA mounting
on either side via Mounting Docks attached to the
fully adjustable down straps. (Case not included).
Sam Browne Carrying HarnessPart Nº: SSHLDER 15 (to fi t 50mm Belt)SSHLDER 15 D07 (to fi t up to 60mm Belt)This harness attaches to the Utility Belt front and rear
via two Klick Fast Docks and incorporates a nylon
shoulder strap with Sam Browne chest mounting
Dock. (Case not included).
Centre Chest HarnessPart Nº: SSHLDER 4 KFThis harness mounts the PDA in the centre of
the chest using a Klick Fast Mounting Dock and
incorporates nylon straps that slip over the arms and
shoulders. (Case not included).
50mm Belt Dock 60mm Belt DockPart Nº: DOCK 03 Part Nº: DOCK 07These Docks are to thread onto Police Utility Belts (please
measure belt width before ordering Docks).As a part
of the Klick Fast range they naturally allow cases to be
Docked in seconds and can therefore be very useful to
offi cers in accessing the LCD screen.
32mm Belt Dock 38mm Belt DockPart Nº: DOCK 01 Part Nº: DOCK 02These Docks are to thread onto an Offi cer’s trouser belt
(please measure belt width before ordering Docks).They
allow the Offi cer to place the radio on his belt while
working around the Police Station. Also suitable for
Undercover Police.
Sew-on DockPart Nº: DOCK 06 Part Nº: DOCK 06 EV02A nylon Dock which can be stitched onto uniforms and
protective clothing. The Sew-on Dock makes the Klick Fast
range supremely versatile, allowing offi cers to mount
cases exactly where they are needed or most comfortable.
The DOCK 06 EVO2 has the option to attach a lanyard.
Stick-on DockPart Nº: DOCK 04Same fi tting as Sew-on Dock but has been covered with a
self adhesive backing for mounting on vehicle dashboards
and walls.
Screw-on DockPart Nº: DOCK 05With four 4mm diameter recessed mounting holes to
allow the Dock to be securely screwed onto walls or into
lockers for safe storage. It is also suitable for mounting
onto a vehicle dashboard for more permanent fi xture if
required.
‘Screw-to-Fit’ DockPart Nº: DOCK 08While you are awaiting garments with sew-in Docks on,
you can upgrade your existing garments with this screw-
together Dock. Can be fi tted within minutes.
The Klick Fast ConnectorThe heart of the Klick Fast system, incorporated into every
radio case. This slim, durable moulding allows quick,
easy docking and locking of the case with seven point
ratchet positioning. Slide the connector into any Dock
to lock it securely in place, twist to the best position for
comfort. To release, simply invert the case and lift out.
Plea
se N
ote:
Fit
ting
any
pro
duct
not
man
ufac
ture
d by
Pet
er J
ones
(IL
G)
Ltd
into
a K
lickF
ast
fi tt
ing
or o
nto
a K
lickF
ast
stud
will
inva
lidat
e yo
ur w
arra
nty.
“The
Man
ufac
ture
r her
eby
exclu
des a
ll lia
bilit
y fo
r any
loss
cau
sed
by th
e fa
ilure
of a
ny e
quip
men
t man
ufac
ture
d by
a th
ird p
arty
(inc
ludi
ng b
ut n
ot li
mite
d to
pro
tect
ive
equi
pmen
t) to
per
form
in a
ccor
danc
e w
ith it
s spe
cifi c
atio
n w
here
the
prod
uct i
s atta
ched
to o
r use
d in
con
junc
tion
with
such
equ
ipm
ent o
ther
than
in a
ccor
danc
e w
ith th
e m
anuf
actu
rer’s
inst
ruct
ions
.”
Manufactured by Peter Jones (ILG) Ltd. Lower Monk Street, Abergavenny, Monmouthshire NP7 5LU, U.K.Tel: +44 (0) 1873 852742 Fax: +44 (0) 1873 857573 Skype: peterjonesilg Email: [email protected] Web: www.peterjonesilg.co.uk
Chest HarnessPart Nº: SSHLDER 999 ADJKFThis harness mounts the radio on the chest using a
Klick Fast Mounting Dock. The radio mounting position
is fully adjustable. (Case not included).