Blanket and Solution Warming

Cabinets

CMP has been building high quality warming cabinets for over 60 years and has become the industry standard for hospital and emergency room blanket and solution storage. CMP stainless steel Warming Cabinets can be

found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty.

Features:

• Stainless Steel Construction • Many Standard Sizes Available • Custom Sizes • Electric Heated Compartments • Microprocessor Control System • Digital Display • Over Temperature Alarm • Customizable Temperature Settings/Limits • U.L. Listed • Separately Controlled Chambers • Wire Shelves to maximize airflow • ± 2°F Accuracy • Temperature Adjusting Lockout • Removable Pilaster Strips for easy cleaning • Chart Recorder

Continental Metal Products Co., Inc. – P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888

Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net

Blanket and Solution Warming

Cabinets

Models:

DSW1AE • Single Compartment Heat • 30” wide x 21” or 27” deep x 45” high (outside dimensions) • Approximate weight: 200 lbs • 6.17 cu. ft. (21” deep) & 8.55 cu. ft. (27” deep) • Optional 74” high unit (Approx. wt.: 400 lbs) 13.07 cu. ft. (21” deep) & 18.13 cu. ft. (27” deep) • Adjustable Wire Shelf

DSW2AE • Available with Two Compartment Heat or Upper Heated Compartment and Lower Storage Compartment • 30” wide x 21” or 27” deep x 74” high (outside dimensions) • Approximate weight: 410 lbs • 12.33 cu. ft. (21” deep) & 17.10 cu. ft. (27” deep) • Adjustable Wire Shelves

DSW3AE

• Single Compartment Heat • 30” wide x 21” or 27” deep x 26” high (outside dimensions) • Approximate weight: 180 lbs • 3.39 cu. ft. (21” deep) & 4.71 cu. ft. (27” deep) • Available 18” or 24” wide x 21” deep x 26” high 1.86 cu. ft. (18” wide) & 2.63 cu. ft. (24” wide)

Custom Sizes Available

Continental Metal Products Co., Inc. – P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888

Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net

Blanket and Solution Warming

Cabinets

Specifications: Continental Metal Products Warming Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. The heating chamber shall be insulated with 1 ½” thick fiberglass insulation. DSW1AE models contain one adjustable wire shelf and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾” thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a “pass-through” feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. All temperature settings and limits can be customized utilizing the buttons on the front control panel. Users can adjust limit alarm setpoint, delta alarm setpoint, low range setpoint and high range setpoint. A lockout feature is standard and can be enabled to prevent any adjustments to the current settings. Also standard is a slot on the circuit board for a microSD card to allow for data logging. Service Requirements: DSW1AE – 120V, 60HZ, 1PH, 7 Amps DSW2AE (One Compartment Heat) - 120V, 60HZ, 1PH, 7 Amps DSW2AE (Two Compartment Heat) - 120V, 60HZ, 1PH, 12.5 Amps DSW3AE – 120V, 60HZ, 1PH, 7 Amps Units are also available for 220/240V, 50/60HZ

Continental Metal Products Co., Inc. – P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net

Blanket and Solution Warming

Cabinets

Details:

Model DSW2AE-2-24-GD Shown (with optional Thermopane glass doors)

Continental Metal Products Co., Inc. – P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net

Type 304 stainless steel construction

Removable panel with fan 200°F Thermal disc for

additional overheat protection

Chrome plated edgemount hinges

Temperature sensors

Recessed toe kick

Perforated heater guard with 750 watt strip heater for faster heat up time

Easy open magnetic latch to secure door

Heat resistant door gasket

Pilaster strips for shelf adjustment

Wire shelves for increased air circulation

* Fully customizable temperature range settings

using the front control panel (adjust limit alarm

setpoint, delta alarm setpoint, low range setpoint

& high range setpoint) * Temperature adjusting

lock-out standard * Chart recorder utilizing

microSD card Digital display with dual temperature adjusting controls

Over temperature audible alarm and light

¾” thick Thermopane glass door secured in stainless steel frame

UL Listed

Blanket and Solution Warming

Cabinets

Options:

• 18” or 24” deep (inside dimensions)

• Freestanding or recessed mounting

• Left or right side door hinging

• Pass-through feature

• Clear Thermopane glass doors

• 74” high DSW1AE

• Keyed door lock

• Casters for mobility

• USB connection

• Keypad or card reader operated electronic security door lock

• Lower heated or unheated chamber for DSW2AE

• Seismic anchoring

• Stainless steel base for DSW1AE or DSW3AE

• Stainless steel table (36” w. x 25” d. x 36” h.)

• Custom sizes

Continental Metal Products Co., Inc. – P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888

Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net