blind bolt - pop rivets and riveter - fsi rivetsleeve stem lock collar sleeve stem lock collar none...

Cherry Maxibolt®blind bolt

�

Cherry Maxibolt®

installation sequenCe with shifting washer

Contentsstandard Pages

Cherry MAXIBOLT 100° Flush Head - CR7310 ......................................................................................................................... 3 Cherry MAXIBOLT 100° Flush Head- CR76�0 .......................................................................................................................... 4 Cherry MAXIBOLT Protruding Head - CR7311 ......................................................................................................................... 5 Cherry MAXIBOLT Protruding Head - CR76�1 ......................................................................................................................... 6 Cherry Oversize MAXIBOLT Flush Head - CR7340 ................................................................................................................... 7 Cherry Oversize MAXIBOLT Flush Head - CR7650 ................................................................................................................... 8 Cherry Oversize MAXIBOLT Protruding Head - CR7341 ........................................................................................................... 9 Cherry Oversize MAXIBOLT Protruding Head - CR7651 ......................................................................................................... 10

PhysiCal ProPerties

Cherry MAXIBOLT Physical Properties .................................................................................................................................. 11

tooling

Installation Tooling and Pulling Heads ............................................................................................................................ 11-13

installed weights

Cherry MAXIBOLT Installed Weight Chart ............................................................................................................................ 14 Cherry Oversize MAXIBOLT Installed Weight Chart ............................................................................................................... 15

* During the MAXIBOLT installation sequence, the Cherry shift washer collapses into itself leaving a solid washer that is easily retrieved.

3

Lock Collar

“-” type“-” Signifies that the 5/3�" and 3/16" diameter sizes are installed with a double action (shifting type) tool.

Shift Washer

Lock Collar

“s” type “S” Signifies that the fastener is installed with a single action (non-shifting) tool for 5/3�" and 3/16" diameters. “-” signifies that the fastener is installed with a single action (non-shifting) tool for 1/4" and 5/16" diameters.

Lock Collar

“u” type

“U” Signifies that the fastener is installed by a single action (non-shifting) tool for all diameters.

notes➀ The length of “D” diameter

may be .00� undersize.

➁ Material designation refers to chemical composition only.

➂ -05 and -06 dia. fasteners are installed with a double action (shifting) tool; S05 dia., S06 dia., -08 dia., and -10 dia. fasteners are installed with a single action (non-shifting) tool and are supplied with shift washer. Shift washer is solid or split, mfg’s option.

4. Sizes below heavy line are special order only.

➄ Minimum grip for -05 dia. is .094 and -06 dia. is .1�0.

➅ This product meets the requirements of MS90353 (except for zinc plating and NAS 4006 Alum coating) for “-” code parts, in the -05, -06, -08, and -10 diameter series; and for “S” code parts in the S05 and S06 diameter series.

➆ Single digit marking is permissible for grip dash numbers less than 10. A dash “-” before grip number is optional.

8. Lubrication: None, except manufacturer’s option to lubricate lock mechanism with lox compatible dry film lubricant.

➈ Shift washer or stem dyed green for single action 05 and 06 diameters only.

PART NUMBER EXAMPLES

Cherry Ms ➅CR7310S-06-04 MS90353S0604CR7310U-06-04D MS90353U0604DCR7310-06-04 MS90353-0604

Cherry Maxibolt®

100° flush head – Cr7310

➂

dia. dash no.

aMax.

bMax.

CMax.

d±.001 h

PMax.

rMax.

wgage

ZMin.

holelimits

installed strength

doubleaction

singleaction single shear

Min. (lbs.)

tensileMin. (lbs.)s u

-05 S05 U05 .333 .07� .011 .163 .0171/.0�06 .�15 .010 .�830/.�83� .844 .164/.167 �340 1350-06 S06 U06 .386 .080 .013 .198 .0�05/.0�43 .�50 .015 .3�70/.3�7� .875 .199/.�0� 3450 �100— -08 U08 .507 .105 .017 .�59 .0�70/.0310 .305 .0�0 .4318/.43�0 1.000 .�60/.�63 5900 3650— -10 U10 .634 .137 .0�0 .311 .03�5/.0367 .350 .0�5 .5449/.5451 1.�18 .31�/.315 8500 5�00

grip dashno.

grip limits 1/16 range

05 dia. 06 dia. 08 dia. 10 dia.

l ref. K Max. l ref. K Max. l ref. K Max. l ref. K Max.Min. Max.-0� ➄ .157 .�80 .434 .303 .479 — — — —-03 .156 .��0 .34� .496 .365 .541 .406 .616 — —-04 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� — — 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 — — 1.�40 1.416 1.�81 1.490 1.318 1.555-18 1.094 1.158 — — 1.303 1.479 1.344 1.553 1.381 1.618-19 1.156 1.��0 — — 1.365 1.541 1.406 1.616 — —-�0 1.�19 1.�8� — — 1.4�8 1.604 1.469 1.678 — —

FinishCode

Material➁ Finishsleeve steM loCk Collar sleeve steM➈ loCk Collar

NoNe 4037 ALLoy SteeL

AStM-A-331

8740 ALLoy SteeLAStM-A-331

A-286 CReS AMS 5737oR 316 CReS AMS 5690

CAD. PLAteQQ-P-416

tyPe II, CLASS 2

CAD. PLAteQQ-P-416

tyPe I, CLASS 3

PASSIvAteAMS 2700

D 4037 ALLoy SteeL

AStM-A-331


A-286 CReS AMS 5737 oR 316 CReS AMS 5690

IvD ALUMINUMCoAtINg

MIL-DtL-83488

IvD ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

ee 4037 ALLoy SteeL

AStM-A-331



ALUMINUMCoAtINgNAS4006


PASSIvAteAMS 2700

eZ 4037 ALLoy SteeL

AStM-A-331


A-286-CReS AMS 5737oR 316 CReS AMS 5690

ZINC PLAteAStM-B-633

tyPe 2


PASSIvAteAMS 2700

Z 4037 ALLoy SteeL

AStM-A-331



ZINC PLAteAStM-B-633

tyPe 2

CAD. PLAteQQ-P-416

tyPe 1, CLASS 3

PASSIvAteAMS 2700

DD 4037 ALLoy SteeL

AStM-A-331



IvD ALUMINUM CoAtINg PeR MIL-DtL-83488, CL3 tyPe 2 PLUS LIght

gReeN DIe to FeD-StD-595CoLoR RANge 34670 to 34325

IvD ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

4

Cherry Maxibolt®

100° flush head – Cr7620

dia. dash no.

aMax.

bMax.

CMax.

d±.001 h

PMax.

rMax.

wgage

ZMin.

holelimits

installed strength

doubleaction

singleaction single

shearMin. (lbs.)

tensileMin. (lbs.)s u

— S04 — .��9 . 04� .011 .1�8 .0155/.0185 .190 .01� .1839/.1841 .81� .1�9/.13� 1�� 675-05 S05 U05 .334 .074 .011 .163 .0171/.0�06 .�15 .010 .�830/.�83� .844 .164/.167 1980 1150-06 S06 U06 .387 .08� .013 .198 .0�05/.0�43 .�50 .015 .3�70/.3�7� .875 .199/.�0� �9�5 1690— -08 U08 .508 .108 .017 .�59 .0�70/.0310 .305 .0�0 . 4318/.43�0 1.000 .�60/.�63 5000 �900— -10 U10 .635 .140 .0�0 .311 .03�5/.0367 .350 .0�5 .5449/.5451 1.�18 .31�/.315 7�00 4170

gripdashno.


04 dia. 05 dia. 06 dia. 08 dia. 10 dia.

lref.

KMax.

lref.

KMax.

lref.

KMax.

lref.

KMax.

lref.

KMax.Min. Max.

-0� ➄ .157 .�54 .391 .�80 .434 .3�9 .479 — — — —-03 .156 .��0 .316 .453 .34� .496 .365 .541 .406 .616 — —-04 .�19 .�8� .379 .516 .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .441 .578 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .504 .641 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .566 .703 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .6�9 .766 .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .691 .8�8 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 — — .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 — — .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� — — .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 — — .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 — — 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 — — 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� — — — — 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 — — — — 1.�40 1.416 1.�81 1.490 — —-18 1.094 1.158 — — — — 1.303 1.479 1.344 1.553 — —-19 1.156 1.��0 — — — — 1.366 1.541 1.406 1.616 — —-�0 1.�19 1.�8� — — — — 1.4�8 1.604 1.468 1.678 — —

finishCode

Material➁ finish

lube➇sleeve steM loCK Collar➉ sleeve steM➈ loCK Collar➉NoNe A-286 CReS

AMS 5737A-286 CReSAMS 5737


PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL

D A-286 CReSAMS 5737

A-286 CReSAMS 5737


ALUMINUM CoAtINgMIL-DtL-83488

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL

DL A-286 CReSAMS 5737

A-286 CReSAMS 5737


PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe oRDICRoNIte

DL-5DN A-286 CReS




PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe

N A-286 CReSAMS 5737

A-286 CReSAMS 5737


PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe

P A-286 CReSAMS 5737

A-286 CReSAMS 5737


CAD. PLAte QQ-P-416tyPe II CLeAR

DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL

PDL A-286 CReSAMS 5737

A-286 CReSAMS 5737



DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe oRDICRoNIte

DL-5

➂

Lock Collar

“-” type “-” Signifies that the 5/3�" and 3/16" diameter sizes are installed with a double action (shifting type) tool.

Shift Washer

Lock Collar


Lock Collar

“u” type “U” Signifies that the fastener is installed by a single action (non-shifting) tool for all diameters.

notes ➀ The length of “D” diameter





➄ Minimum grip for -04 and -05 dia. is .094 and -06 dia. is .1�0.

➅ This product meets the requirements of MS�1140 for “-” and “S” code parts, except for “D” and “DN” finish codes. NASM8975 applies with the following consideration: load rate for testing spindle retention of -04 dia. = 700 lbs/minute.

➆ Single digit marking is permissible for grip dash numbers less than 10.

➇ When lubricated, parts shall be lubricated per AS5�7�, MIL-L-8713� or DOD-L-85645.

➈ Shift washer or stem dyed green for single action 05 and 06 diameters only.

➉ Optional to use Inconel 600 per AMS 5687 (no finish requirement) on -04 dia. lock collars only.

11 Required on -05 dia. and larger with “none” or “P” finish code.

Part nuMber exaMPles

Cherry Ms ➅CR76�0S-06-04 MS�1140S0604

CR76�0U-06-04D MS�1140U0604DCR76�0-06-04 MS�1140-0604

5

Cherry Maxibolt®

Protruding head – Cr7311

Lock Collar

“-” type “-” Signifies that the 5/3�" and 3/16" diameter sizes are installed with a double action (shifting type) tool.

Shift Washer

Lock Collar


Lock Collar


notes

➀ The length of “D” diameter may be .00� undersize.




5. This product meets the requirements of MS90353 (except for zinc plating and NAS 4006 Alum coating) for “-” code parts, in the -05, -06, -08, and -10 diameter series; and for “S” code parts in the S05 and S06 diameter series.

➅ Single digit marking is permissible for grip dash numbers less than 10. A dash “-” before grip number is optional.


➇ Shift washer or stem dyed green for single action 05 and 06 diameters only.


Cherry MsCR7311S-06-04 MS90354S0604

CR7311U-06-04D MS90354U0604DCR7311-06-04 MS90354-0604

➂

dia. dash no.

a bd

±.001P

Max.r

Max.Z

Min.hole

limits

installed strength

doubleaction

single action single shear

Min. (lbs.)tensile

Min. (lbs.)s u-05 S05 U05 .�50/.�7� .06�/.070 .163 .�15 .010 .844 .164/.167 �340 1350-06 S06 U06 .305/.33� .1�5/.135 .198 .�50 .015 .875 .199/.�0� 3450 �100— -08 U08 .400/.43� .130/.140 .�59 .305 .018 1.000 .�60/.�63 5900 3650— -10 U10 .480/.5�� .131/.141 .311 .350 .0�1 1.�18 .31�/.315 8500 5�00

gripdashno.


05 dia. 06 dia. 08 dia. 10 dia.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.Min. Max.-01 .031 .095 .�17 .37� — — — — — —-0� .094 .157 .�80 .434 .303 .479 .344 .553 .381 .618-03 .156 .��0 .34� .496 .365 .541 .406 .616 .443 .680-04 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.503 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� 1.155 1.309 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 1.�17 1.37� 1.�40 1.416 1.�81 1.490 1.318 1.555-18 1.094 1.157 1.�80 1.434 1.303 1.479 1.344 1.553 1.381 1.618-19 1.156 1.��0 1.34� 1.496 1.365 1.541 1.406 1.616 1.443 1.680-�0 1.�19 1.�8� 1.405 1.559 1.4�8 1.604 1.469 1.678 1.506 1.743

finishCode

Material➁ finishsleeve steM loCK Collar sleeve steM➇ loCK Collar

NoNe 4037 ALLoy SteeL AStM-A-331



CAD PLAte QQ-P-416

tyPe II, CLASS 2

CAD PLAteQQ-P-416

tyPe 1, CLASS 3

PASSIvAteAMS 2700

D 4037 ALLoy SteeL AStM-A-331




ALUMINUM CoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

ee 4037 ALLoy SteeL AStM-A-331



ALUMINUM CoAtINgNAS4006


PASSIvAteAMS 2700

eZ 4037 ALLoy SteeL AStM-A-331



ZINC PLAte AStM-B-633 tyPe 2


PASSIvAteAMS 2700

Z 4037 ALLoy SteeL AStM-A-331



ZINC PLAte AStM-B-633 tyPe 2

CAD PLAte QQ-P-416

tyPe I, CLASS 3

PASSIvAteAMS 2700

DD 4037 ALLoy SteeL AStM-A-331





ALUMINUM CoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

6

Cherry Maxibolt®


Lock Collar

“-” type“-” Signifies that the 5/3�" and 3/16" diameter sizes are installed with a double action (shifting type) tool.

Shift Washer

Lock Collar


Lock Collar







5. This product meets the requirements of MS�1141 for “-” and “S” code parts, except for “D” and “DN” finish codes. NASM8975 applies with the following consideration: load rate for testing spindle retention of -04 dia = 700 lbs/minute.

➅ Single digit marking is permissible for grip dash numbers less than 10.

➆ When lubricated, parts shall be lubricated per AS5�7�, type 1, MIL-L-8713�, or DOD-L-85645.

➇ Shift washer or stem dyed green for single action 05 and 06 diameters only.

➈ Optional to use Inconel 600 per AMS 5687 (no finish requirement) on -04 dia. lock collars only.

➉ Required on -05 dia. and larger with “none” or “P” finish code.


Cherry MsCR76�1S-06-04 MS�1141S0604CR7621U-06-04D MS21141U0604DCR76�1-06-04 MS�1141-0604

➂

dia. dash no.

a bd

±.001P

Max.r

Max.Z

Min.hole

limits

installed strength

doubleaction

singleaction single shear

Min. (lbs.)tensile

Min. (lbs.)s u— S04 — .197/.�15 .054/.060 .1�8 .190 .010 .81� .1�9/.13� 1�� 675-05 S05 U05 .�50/.�7� .06�/.070 .163 .�15 .010 .844 .164/.167 1980 1150-06 S06 U06 .305/.33� .1�5/.135 .198 .�50 .015 .875 .199/.�0� �9�5 1690— -08 U08 .400/.43� .130/.140 .�59 .305 .018 1.000 .�60/.�63 5000 �900— -10 U10 .480/.5�� .131/.141 .311 .350 .0�1 1.�18 .31�/.315 7�00 4170

gripdashno.


04 dia. 05 dia. 06 dia. 08 dia. 10 dia.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.Min. Max.-01 .031 .095 .191 .�99 .�17 .37� — — — — — —-0� .094 .157 .�54 .361 .�80 .434 .303 .479 .344 .553 .381 .618-03 .156 .��0 .316 .4�3 .34� .496 .365 .541 .406 .616 .443 .680-04 .�19 .�8� .379 .486 .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .441 .548 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .504 .611 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .566 .673 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .6�9 .736 .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .691 .798 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 — — .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 — — .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� — — .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 — — .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 — — 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 — — 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� — — 1.155 1.309 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 — — 1.�17 1.37� — — — — — —

finishCode

Material➁ finish

lubesleeve steM loCK Collar➈ sleeve steM➇ loCK Collar➈NoNe A-286 CReS



PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆


A-286 CReSAMS 5737



PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆

DL A-286 CReSAMS 5737

A-286 CReSAMS 5737


PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe oRDICRoNIte

DL-5DN A-286 CReS




PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe

N A-286 CReSAMS 5737

A-286 CReSAMS 5737


PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe


A-286 CReSAMS 5737



DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆


A-286 CReSAMS 5737



DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe oRDICRoNIte

DL-5

7

➂

Shift Washer

Lock Collar





➂ Shift Washer is solid or split, mfg's option.


➄ Minimum grip for -05 dia. is .094 and -06 dia. is .1�0.

➅ This product meets the nominal diameter strength requirements of NASM81177, except hole size shall be as specified herein.

➆ Single digit marking is permissible for grip dash numbers less than 10. A dash “-” before grip number is optional.


➈ Shift washer or stem dyed green for S05 and S06 diameters only.

Part nUMBer eXaMPles

CherryCR7340S-06-04CR7340-08-04

Cherry oversiZe Maxibolt®

flush head – Cr7340

dia. dash no.

aMax

bMax

CMax

d±.001 h

PMax.

rMax.

w gage

ZMin.

holelimits

installed strengthsingle action single shear

Min. (lbs.)tensile

Min. (lbs.)sS05 .333 .066 .011 .179 .0171/.0�06 .�15 .010 .�830/.�83� .844 .180/.183 �340 1350S06 .386 .074 .013 .�14 0�05/.0�43 .�50 .015 .3�70/.3�7� .875 .�15/.�18 3450 �100-08 .507 .099 .017 .�75 .0�70/.0310 .305 .0�0 .4318/.43�0 1.000 .�76/.�79 5900 3650-10 .634 .131 .0�0 .3�7 .03�5/.0367 .350 .0�5 .5449/.5451 1.�18 .3�8/.331 8500 5�00

gripdashno.



ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.Min. Max.-0� ➄ .157 .�80 .434 .3�9 .479 — — — —-03 .156 .��0 .34� .496 .365 .541 .406 .616 — —-04 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� — — 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 — — — — 1.�81 1.490 1.318 1.555

finishCode

Material➁ finish

sleeve steM loCK Collar sleeve steM➈ loCK CollarNoNe 4037 ALLoy

SteeLAStM-A-331

8740 ALLoy SteeL

AStM-A-331


CAD. PLAteQQ-P-416

tyPe II, CLASS 2

CAD. PLAteQQ-P-416

tyPe I, CLASS 3

PASSIvAteAMS 2700

D 4037 ALLoy SteeL

AStM-A-331

8740 ALLoy SteeL

AStM-A-331


ALUMINUM CoAtINg MIL-DtL-83488

ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

DD 4037 ALLoy SteeL

AStM-A-331

8740 ALLoy SteeL

AStM-A-331




ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

8

Shift Washer

Lock Collar





➂ Shift washer or serrated portion of stem dyed green for the -05 and -06 diameters only. Shift washer is solid or split, mfg’s option.


➄ Minimum grip for -05 dia. is .094 and -06 dia. is .100.

➅ This product meets the nominal diameter strength requirements of NASM8975, except hole size shall be as specified herein.

➆ Single digit marking is permissible for grip dash numbers less than 10.

➇ When lubricated, parts shall be lubricated per MIL-L-46010, type 1 or MIL-L-8713�.

➈ Stem head diameter may be .00� below “D Dia” Min.


CherryCR7650S-06-04CR7650-08-04D

Cherry oversiZe Maxibolt® flush head – Cr7650

➂

dia. dash no.

aMax

bMax

CMax

d±.001 h

PMax.

rMax.

w gage

ZMin.

holelimits

installed strength

single action single shear

Min. (lbs.)

tensileMin. (lbs.)s

S05 .334 .066 .011 .179 .0171/.0�06 .�15 .010 .�830/.�83� .844 .180/.183 1980 1150S06 .386 .074 .013 .�14 .0�05/.0�43 .�50 .015 .3�70/3�7� .875 .�15/.�18 �9�5 1690-08 .507 .099 .017 .�75 .0�70/.0310 .305 .0�0 .4318/.43�0 1.000 .�76/.�79 5000 �900-10 .634 .131 .0�0 .3�7 .03�5/.0367 .350 .0�5 .5449/.5451 1.�18 .3�8/.331 7�00 4170

gripdashno.



ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.Min. Max.-0� ➄ .157 .�80 .434 .3�9 .505 — — — —-03 .156 .��0 .34� .496 .365 .541 .406 .616 — —-04 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� . — . — 1.178 1.354 1.�19 1.4�8 1.�56 1.493

finishCode

Material➁ finish

lube➇sleeve steM loCK Collar sleeve steM➂ loCK CollarNoNe A-286 CReS



PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL


A-286 CReSAMS 5737


ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL


A-286 CReSAMS 5737


CAD. PLAte QQ-P-416

tyPe II, CLeARDIChRoMAte,

CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL

9

Shift Washer

Lock Collar





➂ Shift Washer is solid or split, mfg's option.


➄ This product meets the nominal diameter strength requirements of NASM8975, except hole size shall be as specified herein.



➇ Shift washer or stem dyed green for S05 and S06 diameters only.


CherryCR7341S-06-04CR7341-08-04D



➂

dia. dash no.

a bd

±.001P

Max.r

Max.Z

Min.hole

limits


Min. (lbs.)tensile

Min. (lbs.)sS05 .�50/.�7� .06�/.070 .179 .�15 .010 .844 .180/.183 �340 1350S06 .305/.33� .1�5/.135 .�14 .�50 .015 .875 .�15/.�18 3450 �100-08 .400/.43� .130/.140 .�75 .305 .018 1.000 .�76/.�79 5900 3650-10 .480/.5�� .131/.141 .3�7 .350 .0�1 1.�18 .3�8/.331 8500 5�00

gripdashno.



ref.K

Max.l

ref.K

Max.l

ref.K

Max.l

ref.K

Max.Min. Max.-01 .031 .095 .�17 .37� — — — — — —-0� .094 .157 .�80 .434 .303 .479 .344 .553 .381 .618-03 .156 .��0 .34� .496 .365 .541 .406 .616 .443 .680-04 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-05 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-06 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-07 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-08 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-09 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1.�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 — — 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� — — 1.178 1.354 1.�19 1.4�8 1.�56 1.493

finishCode

Material➁ finish

sleeve steM loCK Collar sleeve steM➇ loCK CollarNoNe 4037 ALLoy

SteeLAStM-A-331

8740 ALLoy SteeL

AStM-A-331


CAD. PLAteQQ-P-416

tyPe II, CLASS 2

CAD. PLAteQQ-P-416

tyPe I, CLASS 3

PASSIvAteAMS 2700

D 4037 ALLoy SteeL

AStM-A-331

8740 ALLoy SteeL

AStM-A-331


ALUMINUM CoAtINg MIL-DtL-83488

ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

DD 4037 ALLoy SteeL

AStM-A-331

8740 ALLoy SteeL

AStM-A-331




ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

10

Shift Washer

Lock Collar


notes

➀ The length of “D” diameter may be .00� undersize.


➂ Shift Washer or serrated portion of stem dyed green for the -05 and -06 diameters only. Shift Washer is solid or split, mfg's option.


➄ This product meets the nominal diameter strength requirements of NASM8975, except hole size shall be as specified herein.


➆ When lubricated, parts shall be lubricated per MIL-L-46010, type 1 or MIL-L-8713�.

➇ Stem head diameter may be .00� below “D Dia” Min.


CherryCR7651S-06-04CR7651-08-04D



➂

dia. dash no.

a bd

±.001P

Max.r

Max.Z

Min.hole

limits


Min. (lbs.)tensile

Min. (lbs.)sS05 .�50/.�7� .06�/.070 .179 .�15 .010 .844 .180/.183 1980 1150S06 .305/.33� .1�5/.135 .�14 .�50 .015 .875 .�15/.�18 �9�5 1690-08 .400/.43� .130/.140 .�75 .305 .018 1.000 .�76/.�79 5000 �900-10 .480/.5�� .131/.141 .3�7 .350 .0�1 1.�18 .3�8/.331 7�00 4170

gripdashno.

grip limits1/16 range

05 dia. 06 dia. 08 dia. 10 dia.

l ref. K Max. l ref. K Max. l ref. K Max. l ref. K Max.Min. Max.-1 .031 .095 .�17 .37� — — — — — —-� .094 .157 .�80 .434 .303 .479 .344 .553 .381 .618-3 .156 .��0 .34� .496 .365 .541 .406 .616 .443 .680-4 .�19 .�8� .405 .559 .4�8 .604 .469 .678 .506 .743-5 .�81 .345 .467 .6�� .490 .666 .531 .740 .568 .805-6 .344 .407 .530 .684 .553 .7�9 .594 .803 .631 .868-7 .406 .470 .59� .746 .615 .791 .656 .866 .693 .930-8 .469 .53� .655 .809 .678 .854 .719 .9�8 .756 .993-9 .531 .595 .717 .87� .740 .916 .781 .990 .818 1.055

-10 .594 .657 .780 .934 .803 .979 .844 1.053 .881 1.118-11 .656 .7�0 .84� .996 .865 1.041 .906 1.116 .943 1.180-1� .719 .78� .905 1.059 .9�8 1.104 .969 1.178 1.006 1 .�43-13 .781 .845 .967 1.1�� .990 1.166 1.031 1.�40 1.068 1.305-14 .844 .907 1.030 1.184 1.053 1.��9 1.094 1.303 1.131 1.368-15 .906 .970 1.09� 1.�46 1.115 1.�91 1.156 1.366 1.193 1.430-16 .969 1.03� 1.155 1.309 1.178 1.354 1.�19 1.4�8 1.�56 1.493-17 1.031 1.095 1.�17 1.37� — — — — — —

FinishCode

Material➁ Finish

lUBesleeve steM loCk Collar sleeve steM➂ loCk CollarNoNe A-286 CReS



PASSIvAteAMS 2700

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆


A-286 CReSAMS 5737


ALUMINUMCoAtINg

MIL-DtL-83488

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆


A-286 CReSAMS 5737



DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

oPtIoNAL➆


A-286 CReSAMS 5737


CAD. PLAte QQ-P-416tyPe II, CLeAR

DIChRoMAte, CLASS 2

PASSIvAteAMS 2700

PASSIvAteAMS 2700

NoNe oRDICRoNIte

DL-5

11

Cherry Maxibolt® interChangeability

head style MaterialPart nuMber

Cherry MsFLUSH HEAD ALLOy STEEL CR7310S

CR7310UCR7310

MS90353SMS90353UMS90353

PROTRUDINg HEAD

ALLOy STEEL CR7311SCR7311UCR7311

MS90354SMS90354UMS90354

FLUSH HEAD A-�86 CRES CR76�0SCR76�0UCR76�0

MS�1140SMS�1140UMS�1140

PROTRUDINg HEAD

A-�86 CRES CR76�1SCR76�1UCR76�1

MS�1141SMS�1141UMS�1141

MeChaniCal ProPerties

diameter

single shear - lbs. tensile - lbs.alloy steel

112Ksia-28695Ks alloy steel a-286

-04 — 1�� — 675-05 �340 1980 1350 1150-06 3450 �9�5 �100 1690-08 5900 5000 3650 �900-10 8500 7�00 5�00 4170

Cherry Maxibolt®

installation tool seleCtion ChartThe tooling and pulling head combinations shown in the chart below will install the diameter MAXIBOLTs indicated by the shaded areas, in all grip lengths, head styles and materials. Cherry shift washer style only. (For “U” and “-“ type MAXIBOLT installation tooling, please contact Cherry Aerospace at 714-545-5511 or at the address listed on the back cover of this catalog.)

riveter Model

PullingCapacity

heightinches

base dia.inches

weightlbs.

Pullinghead

diameter (3)1/8" 5/32" 3/16" 1/4" 5/16"

g704B 3136 11.0 4.9 4.5

H701B-456H781-456

H78�H753A-456

g746A 1850 11.0 4.9 4.0

H701B-456H781-456

H78�H753A-456

g747 �100 11.37 4.56 3.5

H701B-456H781-456

H78�H753A-456

g750A 3800 6.4 N/A 1.9

H750A-456H781-456 (1)

H78�(1)H753-456 (1)H750A-5MBH750A-6MB

g83 3750 11.5 4.9 4.7H701B-456 (�)

H83B-5MBH83B-6MB

g744 3800 1�.6 6.�5 7.0H846A-456H744-5MBH744-6MB

g-84 5750 13.�5 6.�5 7.7 H84A-8MBg85D-S 6500 15.�5 6.0 10.5 H65�-8MBg87D 9400 15.�5 6.0 10.5 H65�-8MB

(1) Requires 750A-088 adapter. (�) Requires 700-300 adapter. (3) For 5/16" MAXIBOLT installation tooling contact Cherry Aerospace.

Cherry oversiZe Maxibolt® head style / Material

head style MaterialPart nuMber

CherryFLUSH HEAD ALLOy STEEL CR7340S

CR7340

PROTRUDINg HEAD

ALLOy STEEL CR7341SCR7341

FLUSH HEAD

A-�86 CRES CR7650SCR7650

PROTRUDINg HEAD

A-�86 CRES CR7651SCR7651

1�

g83

National Stock Number 5130-01-435-3507

The Cherry g83 pneumatic-hydraulic installation tool is a rugged production tool designed for high speed, reliable installation of the most popular sizes of aircraft blind bolts, lockbolts and blind rivets.

Weighing only 4.58 pounds, this tool has been designed with many ergonomic features - less recoil, low noise and comfortably fitting in the operator’s hand. It can be operated in any position with one hand. The g83 is 11 1/�" high and operates on 90 to 100 psi at the tool. It has a .4375" stroke and 3750 lbs. pulling capacity.

g704b

National Stock Number 5130-01-393-1584 Military Part Number M85188T�

The g704B weighs 4.5 lbs. and can be operated in any position. It has a rivet setting stroke of .518" and a pulling capacity of 3136 lbs. on 90 psi air pressure. Normal operating air pressure is 90-1�0 psi at the inlet. The g704B consumes approximately 4 DFM of air at �0 cycles per minute and its maximum noise level under load does not exceed 85 dB(A).

g750a

The g750A Cherry hand hydraulic riveting tool provides the versatility of a pneumatic-hydraulic riveter, but with the lightweight, high pull strength ratio desirability not found in other hand riveters. The Cherry g750A has a unique �-step hydraulic power cylinder that provides the user with the ease of pulling the handle without the strain normally endured to install a high strength fastener. This patentable �-step power feature allows the user to squeeze the handle without feeling the need to squeeze harder to install the fastener. The Cherry g750A hand riveter can install a variety of blind fastener styles, diameters, head configurations, and material combinations without changing the pulling head or adjusting the tool.

WARNING: Operating these tools with a damaged or missing stem deflector, or using deflector as a handle may result in severe personal injury.

?

?

*

2-1/8"

(53.97 mm)

3/4" (19.05 mm)

1-3/4"(44.45 mm)

4-15/16"

(125.41 mm)

11"(279.40 mm)

Cherry Maxibolt® installation tooling

13

g84The Cherry g84 pneumatic-hydraulic Lockbolt installation tool is a rugged production tool designed for high speed, reliable installation of the most popular sizes of aircraft blind bolts, lockbolts and blind rivets. It incorporates a new improved bayonet attachment for quick change of pulling heads.

Weighing only 7.70 pounds (3.5 kg), this tool has been designed with many ergonomic features - less recoil, low noise and comfortably fitting in the operator’s hand. It can be operated in any position with one hand.

h83b straight Pulling headAvailable for 5/3�" and 3/16" diameter MAXIBOLTs. For use with g83 & g84 tools. For use with Cherry shift washer type only. For "U" type blind bolts a replaceable nose piece is available. Contact Cherry Aerospace Technical Services for more information.

h828-5Mb and h828-6Mb right angle Pulling headsThis pulling head aids installation of MAXIBOLTs in limited access applications. Available for 5/3�" and 3/16" diameter MAXIBOLTs. For use with g744 tool. For use with Cherry shift washer type only. Use 744-�00 adapter for g83/g84

560-070 adaPter

Adapts H744-5/6MB, H856-6MB and H8�8-5/6MB pulling heads to g85D-S and g87D riveters.

griP gage 269b12

?

?

13.25"(336.6 mm)

6.25"(158.8 mm)

2.25"(54 mm)

1.125"(28.6 mm)

5.69"(144.5 mm)

2.75"(69.9 mm)

Cherry Maxibolt® installation tooling

14

style grip length -04 dia. -05 dia. -06 dia. -08 dia. -10 dia.

CR7310 -01-0�-03-04-05

—————

—�.�8�.653.0�3.39

—3.664.�14.755.30

——

8.369.30

10.�5

——

13.4614.8016.15

-06-07-08-09-10

—————

3.764.134.504.875.�4

5.846.386.937.478.0�

11.191�.1313.0714.0�14.96

17.4918.63�0.18�1.5��.87

-11-1�-13-14-15

—————

5.605.976.346.717.08

8.569.109.65

10.1910.74

15.9016.8517.7918.7319.68

�4.�1�5.55�6.90�8.�4�9.59

CR7311 -01-0�-03-04-05

—————

�.33�.693.063.433.80

—5.466.016.557.09

—10.�911.��1�.1513.08

—14.1�15.4616.8118.15

-06-07-08-09-10

—————

4.174.544.915.�85.65

7.648.188.739.�79.8�

14.0114.9515.8816.8117.74

19.50�0.84��.18�3.53�4.87

-11-1�-13-14

————

6.0�6.386.757.1�

10.3610.9011.4511.99

18.6719.61�0.54�1.47

�6.��7.56�8.9030.�5

CR76�0 -0�-03-04-05-06

1.101.331.551.771.98

�.31�.683.053.433.80

3.644.194.745.�95.84

—8.459.39

10.3311.�7

——

14.9616.3�17.67

-07-08-09-10-11

�.�0�.41�.6�

——

4.174.554.9�5.�95.66

6.396.947.498.048.59

1�.�113.1614.1015.0415.98

19.03�0.39�1.75�3.11�4.46

-1�-13-14-15

————

6.046.416.787.16

9.149.69

10.�410.79

16.9�17.8718.8119.75

�5.8��7.18�8.54�9.90

CR76�1 -01-0�-03-04-05

1.301.5�1.741.96�.18

�.35�.7�3.093.473.84

—5.5�6.076.6�7.17

—10.3911.341�.�813.��

—14.�715.6316.9818.34

-06-07-08-09-10

�.40�.6��.843.06

—

4.�14.584.965.335.70

7.7�8.�78.8�9.379.9�

14.1615.1016.0516.9917.93

19.70�1.06��.4��3.77�5.13

-11-1�-13-14

————

6.086.456.8�7.19

10.4711.0�11.571�.1�

18.8719.81�0.76�1.70

�6.49�7.85�9.�130.56

Cherry Maxibolt®

installed weights (lbs. per 1000 pieces)

15

Cherry Maxibolt®

installed weights (lbs. per 1000 pieces)

style grip length -05 dia. -06 dia. -08 dia. -10 dia.CR7340 -01

-0�-03-04-05

—�.633.083.5�3.97

—3.984.615.�55.88

——

9.��10.�711.3�

——

14.6816.1717.65

-06-07-08-09-10

4.414.865.305.756.19

6.5�7.167.798.439.06

1�.3713.4314.4815.5316.58

19.14�0.6��.11�3.59�5.08

-11-1�-13-14-15

6.647.087.537.978.4�

9.7010.3410.9711.611�.�4

17.6318.6819.73�0.78�1.83

�6.56�8.05�9.5331.0�3�.50

CR7341 -01-0�-03-04-05

�.643.083.533.974.4�

—6.�16.857.498.1�

—v11.�11�.�613.3114.37

—16.8118.3019.78�1.�7

-06-07-08-09-10

4.865.315.756.�06.64

8.769.39

10.0310.671.30

15.4�16.4717.5�18.5719.6�

��.75�4.�4�5.7��7.�1�8.69

-11-1�-13-14-15

7.097.537.988.4�8.87

11.941�.5713.�113.8514.48

�0.67�1.7��.77�3.8��4.88

30.1831.6633.1534.6336.1�

CR7650 -0�-03-04-05-06

�.663.113.564.014.46

4.0�4.665.305.956.59

—9.3�

10.3811.441�.50

——

16.3417.8419.34

-07-08-09-10-11

4.915.365.816.�66.71

7.�37.888.5�9.169.81

13.5714.6315.6916.7517.81

�0.84��.35�3.85�5.35�6.85

-1�-13-14-15

7.167.618.068.51

10.4511.0911.731�.38

18.8819.94�1.00��.06

�8.35�9.8531.353�.85

CR7651 -01-0�-03-04-05

�.663.113.564.014.46

—6.�96.937.578.��

—11.331�.3913.4514.5�

—16.9918.4919.99�1.49

-06-07-08-09-10

4.915.365.816.�66.71

8.869.50

10.1410.7911.43

15.5816.6417.7018.7619.83

��.99�4.50�6.00�7.50�9.00

-11-1�-13-14

7.167.618.068.51

1�.071�.7�13.3614.00

�0.89�1.95�3.01�4.07

30.503�.0033.5035.00

liMited warrantySeller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of companies manufacturing industrial or aerospace fasteners. In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller’s option. Seller agrees to any freight costs in connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods shall be Buyer’s responsibility. SELLER’S WARRANTy DOES NOT APPLy WHEN ANy PHySICAL OR CHEMICAL CHANgE IN THE FORM OF THE PRODUCT IS MADE By BUyER. THE FOREgOINg EXPRESS WARRANTy AND REMEDy ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES; ANy IMPLIED WARRANTy AS TO QUALITy, FITNESS FOR PURPOSE, OR MERCHANTABILITy IS HEREBy SPECIFICALLy DISCLAIMED AND EXCLUDED By SELLER. This warranty is void if seller is not notified in writing of any rejection of the goods within ninety (90) days after receipt of the goods by buyer.

Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAgES ARE HEREBy EXPRESSLy EXCLUDED.

Our policy is one of continuous development. Specifications shown in this document may be subject to changes introduced after publication.

CHERRy® , MAXIBOLT® are trademarks of Cherry Aerospace.

1��4 East Warner Avenue, Santa Ana, CA 9�705 voice: 714-545-5511 • fax: 714-850-6093 www.cherryaerospace.com

©�007 Cherry Aerospace Suppliers Federal I.D. Code – 11815 CA-1009, Rev. A, Date: January 15, �007, DCR 07-0014

blind bolt - pop rivets and riveter - fsi rivetsleeve stem lock collar sleeve stem lock collar none...

Documents