bmi specs - black poly alloy (ppsu) pex fittings · black poly-alloy (ppsu) pex fittings...
TRANSCRIPT
TECHNICAL INFORMATION
BLACK POLY-ALLOY (PPSU)PEX FITTINGS
1-800-561-85791-800-361-1452
www.bmicanada.com
PbCertifications by:
Montreal ~ Toronto ~ Vancouver ~ Cincinnati
Specifications- Acudel® 22000 by injection molding
- Working pressure: 100 psi
- Working temperature: 180 OF (82
OC)
Comply withASTM F2159-2011, NSF/ANSI Standard 14
Manufactured byCixi Welday Plastic Product Co., Ltd.
BMI# 309041/2"Couplings
BMI# 309041" x 3/4" Red. Couplings
BMI# 300233/4" x 1/2" Red. Coupling
BMI# 300061" Coupling
BMI# 309053/4" Couplings
PbComply withASTM F2159-2011NSF/ANSI Standard 14
s
s
- 2 -
BMI# 309141/2"
O90 Elbows
BMI# 303061"
O90 Elbow
BMI# 309153/4"
O90 Elbow
Pb
s
s
- 3 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 309241/2"Tees
BMI# 304061" Tees
BMI# 309253/4" Tees
Pb
- 4 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 304201/2" x 1/2" x 3/4"Red. Tees
BMI# 309303/4" x 1/2" x 3/4"Red. Tees
BMI# 309293/4" x 3/4" x 1/2"Red. Tees
Pb
- 5 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 309313/4" x 1/2" x 1/2"Red. Tees
BMI# 309301" x 1" x 1/2"Red. Tees
BMI# 304381" x 1" x 3/4"Red. Tees
Pb
- 6 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 309341/2"Plugs
BMI# 308053/4" MIPS Adapters
BMI# 308041/2" MIPS Adapter
BMI# 306061" Plug
BMI# 309353/4" Plugs
Pb
s
s
- 7 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 308061" MIPS Adapters
BMI# 308043/4" x 1/2" MIPS Adapters
BMI# 308171/2" x 3/4" MIPS Adapters
Pb
- 8 -
Comply withASTM F2159-2011NSF/ANSI Standard 14
BMI# 302043/4" Swl Adapters
BMI# 302041/2" Swl Adapters
Pb
ASTM (1)TYPICAL VALUES
Test U.S. Customary Units SI Units
Property Method Value Units Value Units
Mechanical
Tensile Strength D 638 11.2 kpsi 77 MPa
Tensile Modulus D 638 387 kpsi 2.67 GPa
Tensile Elongation at Yield D 638 6.7 % 6.7 %
Tensile Elongation at Break D 638 50 % 50 %
Flexural Strength D 790 15.7 kpsi 108 MPa
Flexural Modulus D 790 402 kpsi 2.77 GPa
Tensile Impact Strength D 1822 1752ft-lb/in 388 2kJ/m
Izod Impact Strength D 256 2.0 ft-lb/in 105 J/m
Thermal(2)Heat Deflection Temperature D 648
at 264 psi (1.8 MPa) 387 °F 197 °C
Electrical
Dielectric Strength, 1/8” (3.2 mm) D 149 470 V/mil 18.5 kV/mm
Dielectric Constant at 1 MHz D 150 3.4 3.4
Dissipation Factor at 1 MHz D 150 0.008 0.00815Volume Resistivity D 257 >9 x 10 ohm-cm 15>9 x 10 ohm-cm
General
Specific Gravity D 792 1.28 1.28
Melt Flow at 715°F (380°C), 2.16 kg D 1238 12 g/10 min 12 g/10 min
Mold Shrinkage D 955 0.7 % 0.7 %
Moisture Absorption, 24 hours D 570 0.3 % 0.3 %
Moisture Absorption, 30 days D 570 0.9 % 0.9 %
- 9 - BMI Canada - Technical SpecificationsBMI201609
Comply withASTM F2159-2011NSF/ANSI Standard 14