bnwas jcx-151/152 - jrc...jcx-151(led) jcx-152(lcd) available as led or 4.3-inch lcd touch screen...
TRANSCRIPT
JCX-151(LED)JCX-152(LCD)
●Available as LED or 4.3-inch LCD touch screen●Compatible for Remote Maintenance System●In/output to JRC’s VDR , ECDIS and Radar●Fully complies with IMO regulations●Motion sensor available (option)
– JRC’s new Bridge Navigational Watch Alarm System is available in two models
JCX-151/152BNWAS
JCX-151(LED)JCX-152(LCD)
JCX-151 JCX-152
JCX-151/JCX-152 B r i d g e N a v i g a t i o n a l W a t c h A l a r m S y s t e m
JCX-151/152features
About BNWASThe Bridge Navigational Watch Alarm System (BNWAS) main purpose is to monitor the presence of watch offi cers and their alertness for early detection of unsafe sailing conditions. The user can define an interval sequence of between 3 and 12 minutes. This will only give a visual indication. The alarm can be reset at any point in time. There is a visual indicator of the time countdown. After the preset interval, an alarm sequence will go into eff ect.When the officer fails to acknowledge within pre-set intervals, visual and audible alarms will be generated in the wheelhouse and other crew spaces as necessary.
BNWAS mandatory time table
JULY2009
JULY2010
JULY2011
JULY2012
JULY2013
JULY2014
New cargo ships > 150GT
New passenger ships
Existing cargo ships > 3.000GT
Existing passenger ships
500GT =< Existing cargo ships < 3.000GT
150GT =< Existing cargo ships < 500GT
Operational Sequence of BNWAS
3rd Audible Alarm
2nd Audible Alarm
1st Audible Alarm
Visual Indication
Bridge
Bridge
Officer Area
Crew Area
(Td = 3~12 Min)
0 Td Td+15s Td+30s Td+120s
IMOBNWAS will be mandatory for all new build passenger ships and cargo ships above 150 GT constructed on and after 1 July 2011 and will be phased in for existing ships over the coming years.
Two display versions availableThe JRC BNWAS is available in 2 versions (JCX-151/JCX-152) on its display, LED or LCD. The LED display showing at a glance alarm stages allowing easy operation. The LCD display with touch screen for high performance operation. Indication of time (with GPS), alarm history and registration of optional alarm's name is available with LCD display.
・・・・
・・・・
LED/LCDDisplay Reset
ButtonReset Button(Waterproof)
MotionSensor
Timer reset(10 points)
Auto Mode(2 points)
Clock Time(for JCX-152)
GPSAuto PilotExternalEquipment
ExternalEquipment
*TTYCS-1
*MPYC-2
*MPYC-7
*MPYC-2
*MPYC-4
*MPYCY-7
*TTYCS-1
*MPYC-2
(Dry Contact)
(Dry Contact)
(IEC61162-1)
*DPYC-1.5
*DPYC-2.5
*MPYC-4
Buzzer
Emergency Call(2 points)
Emergency Call Button
*MPYC-2
*MPYC-4
*MPYC-4
Buzzer
LED Warning Lamp
Buzzer
Buzzer(Max 5 units)
Audible / Visual alarm(8 points)
ExternalEquipment
Back-up Power24VDC
Main power
100-220VAC
Dock Supply CableOption Equipment/Option System
*
Bridge Alarm(4+4 points)
*MPYC-2
(Dry Contact)
*MPYC-2
(Dry Contact)
Main Control Unit
*TTYCS-1
(IEC61162-1)
VDR
*MPYC-2
(Dry Contact)
*MPYC-2
(Dry Contact)
VDR(1port + 8 points)
External alarm(4 points)
Motion Sensor
Reset input Alarm output
2nd stage remote audible alarmBack-up offi cer's and/or
masters's area
3rd stage remote audible alarmCrew member's area
LED Warning Lamp
Reset Button
Main Control Unit
JCX-151 LED display JCX-152 LCD display
( B N WA S )
Emergency Call Button Alarm outputAlarm input
JCX-151/152diagram and specifications
Options and interconnectionsThe JRC BNWAS has a range of standard (Main Control Unit, Reset Button Unit, Buzzer Unit) and optional units (Reset Button Unit (Waterproof ), LED Warning Lamp Unit, Motion Sensor Unit, Emergency Call Button Unit and etc.) to fi t any type and size vessels. Also JRC BNWAS have many I/O ports for interconnection with bridge navigational equipments. (Auto Pilot, Radar, ECDIS and etc.)
SpecificationsName Bridge Navigational Watch Alarm System (BNWAS)Model JCX-151 JCX-152IMO MSC.128(75)Display Unit LED display LCD display
Model NCD-2189 NWB-63Main Control Unit
Model NCK-169Input Reset signal 10 points
Emergency call signal 2 pointsNavigational equipment alarm signal 4 pointsNavigational equipment remote ACK signal 4 points
Automatic mode signal 2 pointsOutput Visual/Audible alarm 8 points
Relay contact signal for VDR 8 pointsNavigational equipment remote ACK 4 points
I/O Display 1 portContact unit ー 1 portVDR 1 portGPS(Clock) ー 1 port
Protection IP22Power supply AC100~120V/200~240V
DC24VPower consumption1 max. 268WAmbient conditions -15~+55℃ 93%@40℃
Options Reset Button Unit NCJ-878Reset Button Unit (Waterproof ) NCJ-879Buzzer Unit NVS-765Motion Sensor Unit NYG-4LED Warning Lamp Unit NCD-2191Emergency Call Button Unit NCJ-880Contact Input Unit2 NQA-2290Contact Output Unit2 NQB-10291 Power consumption changes by the system confi guration. 2 Option only for JCX-152
Reset Button(Waterproof)
For further information, contact:
Since 1915
Main Office:
Overseas Branches : Seattle, Amsterdam, Athens, Manila
Liaison Offices : Taipei, Jakarta, Singapore, Hanoi,
Shanghai, Hamburg, New York
28EM ISO9001,ISO14001 Certified
●Specifications may be subject to change without notice.
URL eng
Printed in Japan2011.7 CAT.No.Y14-215(No.852-2-2)D2012.5
Fujisawa bldg. 30-16, Ogikubo 4-chomeSuginami-ku, Tokyo 167-8540, JapanTelephone: +81-3-6832-1816Facsimile: +81-3-6832-1845
JCX-151/152size and mass
NCK-169 MASS 14.5kg
Main Control Unit
NCD-2189 MASS 2.1kg
LED Display Unit
NCJ-878 MASS 0.5kg
Reset Button UnitNVS-765 MASS 0.4kg
Buzzer UnitNCJ-879 MASS 0.8kg
Reset Button Unit (Waterproof)
NYG-4 MASS 1.0kg
Motion Sensor UnitNCD-2191 MASS 0.5kg
LED Warning Lamp UnitNCJ-880 MASS 0.5kg
Emergency Call Button Unit
216 77
190.
5
220.
3
BNWAS DISPLAY
MENU EM’CY LEFT UP RIGHT
ACK CALL CNCL DOWN ENTER
124
RESET BUTTONBNWAS
106
106
103
25.2 55
101.6
69
BNWAS BUZZER
66
55
140174
70 925.2
100
38
103
106 20.5 55
106
103
5550106
106
154 90.2
7676
NWB-63 MASS 3.0kg
LCD Display Unit
216 77
190.
5
220.
3
BNWAS DISPLAY
MENU EM’CY LEFT UP RIGHT
ACK CALL CNCL DOWN ENTER
124
370
390158.2
155 37.6
380
380
360
170
AME PLATE
170
170170
410
Unit:mm