bob beck protocol - blood purifier

8/7/2019 Bob Beck Protocol - Blood Purifier

1/6

Important Note

This article is only a small part of the complete Bob Beck Protocolarticle. Do NOT read this article without reading the complete BobBeck Protocol article first:

Main Bob Beck Protocol Article

Article #1: Blood Purifier or Blood Electrification

The purpose of the Blood Purifier/Blood Electrification is to attenuate(i.e. disable from multiplying) microbes which flow through the blood.

The Blood Purifier creates a small electrical current in the blood

which will break off a key enzyme on the surface of all microbeswhich are traveling through the blood. This prevents the microbesfrom entering human cells and multiplying therein. The microbes arethen safely removed from the body. The electrical current can alsooutright kill bacteria and other pathogenic invaders.

Because of the vast number of deactivated viruses and deadmicrobes it is almost certain that within the first few days of using theBlood Electrification device you will experience "flu-like symptoms"

(this is called the "Herxheimer Reaction"). These symptoms arecaused by the massive die-off of microbes and do not create any typeof danger.

To prevent this symptom from being severe, it is important to drinkcopious amounts of water during the Bob Beck Protocol. This waterincludes the ozonated water.

The rule of thumb is to drink half your body weight (measured inpounds) in water (measured in ounces). For example, if your weight

is 200 pounds, you would drink 100 ounces of water (1/2 of 200 is100) per day, maybe more. This includes the ozonated water.

Because the Magnetic Pulser is generally used prior to the BloodElectrification treatment, it is important to understand when the watershould be taken:1) First, One hour before the Magnetic Pulser (for electrolytes to


2/6

create an electric current), and2) Second, 30 minutes before the Magnetic Pulser (i.e. thirty minutesafter the first water)

You also might want to drink some water immediately after using theMagnetic Pulser and wait 15 to 30 minutes before starting this BloodPurifier treatment. This water is to detoxify (especially the ozonatedwater) the blood and lymph system.

In other words, the majority of the water you drink during the dayshould be at one of those three times. All three times are before theBlood Purifier. Most, if not all, of the water you take should beozonated water.

If you think you have large amounts of microbes in your body at thebeginning of this treatment, which most cancer patients do have, youmight want to start using the Blood Purifier for only 10 minutes a day,and build up by 4 minutes a day, until you are using the machine fortwo hours. You should use the machine for two hours a day for 4weeks (this does NOT include the days where you use it less thantwo hours).

Likewise, after the four weeks is over, you might want to graduallytaper off by 20 minutes a day for a week.

Including the build-up and taper-off this is a 9 week treatment. But thebenefits of this treatment make it worth the time and effort!

The above instructions apply to both brands of Blood PUrifiers.

NOTE:

There are two different vendors of the Bob Beck Blood Purifier. Their

equipment is very different and the instructions for their use are verydifferent. The two vendors are Sota Instruments and BioElecrtic.

The instructions for using the Sota are in the next section. Theinstructions for using the BioElectric will be linked to below in thesection on BioElectric.


3/6

I recommend the BioElectric brand for several reasons.

Analysis of Sota Instruments Blood Purifier

VERY, VERY Important Note - Study Carefully!!!:

When placing the electrodes on your ulnar and radial arteries (onyour wrists), you should place the electrodes directly on top of thearteries and at the location of strongest pulse. Once you get used toplacing the electrodes you will memorize their location and be familiarwith the amount of tingling of the electrical current.

Before putting the electrodes on your wrist, each metal electrodeshould be placed inside of a cotton sleeve. The purpose of these

cotton sleeves is to protect your skin and to provide better electricalconductivity between the electrodes and the skin. The sleeves needto be completely soaked in tap water (or sea salt water if the tapwater isn't very electrically conductive) in order for the electricity to betransferred from the electrodes to the skin.

The following instructions are for use of blood electrifiers (Sota, etc)that only allow the two electrodes to be placed on one wrist. This isnot as easy to do as when the two electrifiers are placed one on eachwrist (i.e. the way BioElectric does it). With single wrist placement toomuch electrical current just crosses the wrist instead of entering theblood in the arteries. To offset that so much current stays at the levelof the skin a higher amount of electrical current needs to be applied.Some people with delicate skin can't tolerate this level of current.Overweight people also may have problems finding both arteries.

When keeping the electrode sleeves wet, by putting a few drops ofwater on them every 20 to 60 minutes, it is possible that there will bea film of water on the surface of the wrist, and/or on the bottom of the

rubber strap, between the two cotton sleeves. Since electricity alwaystakes the path of least resistance, it is possible the electricity willcross over the thin layer of water on your skin or the bottom of therubber strap, instead of going through the skin and into the bloodstream. You will know this happens because the tingling of the skin,caused by the electrical current, will stop after you put drops of saltwater on the cotton sleeves.


4/6

It is critical to keep the skin between the two cotton sleeves, and thebottom of the rubber strap, DRY. This is very important to check aftereach time you wet the cotton sleeves. You can use a Q-Tip, and/or adry finger and/or blow air between the electrodes, until the areabetween the cotton sleeves is dry!! When the area between them isdry (including the top of the skin and the bottom of the rubber strap),the tingling should return.

I am not an electrical engineer, so when I saw how much morecomplicated the electronics of the Sota Instruments Blood Purifierwas, compared to the original Bob Beck schematics, I decided tohave a real electrical engineer look at it to see if it was true to theoriginal. All of the things I learned in dealing with this guru are worth

noting and there are some surprises!! The second item is the mostimportant!

First, after a great deal of effort on my part, and on the part of anelectronics genius (who designs equipment most people couldn'teven operate), his conclusion was that the Sota Instruments BloodPurifier WAS true to the original. He used his lab equipment toanalyze the actual output of the Sota Blood Purifier and he studiedthe schematics of the original Beck equipment and compared it to theactual Sota circuits. It was all thumbs up.

Second, the dial on the Blood Purifier controls the flow of electricalcurrent. In at least one of the Bob Beck videos, available on Google,Bob Beck tells the audience to adjust the dial to the level of comfort.While this is true, he forgot to mention a very important thing!

During the first half hour, every 5 or 10 minutes you need to turn theknob closer to the maximum. You may be able to turn it up slightly 2or 3 times during this half hour. In other words, every 5 or 10 minutes

you may be able to tolerate a little more tingling. If it is veryuncomfortable then back off on the dial just a little bit.

Some people, perhaps most people, may not be able to tolerate themaximum dial setting. Just do the best you can without being toouncomfortable.


5/6

The bottom line is this, you should adjust the Blood Purifier to a"slightly uncomfortable" position. Do not adjust it to an uncomfortableposition, just to a "slightly uncomfortable" position.

Third, he said there was no reason a person could not build the BloodElectrifier at home using the original Beck schematic (which is linkedto in the main article).

Analysis of BioElectric's "Microbe Electrifier"

Michael Forrest's BioElectric "Microbe Electrifier" is the only one thatalso allows you to use frequencies higher than Beck's 4 hertz in orderto avoid the transfection/electroporation effect. He relies on a graphof frequency verses transfection in the Biophysical Journal, volume

58, 1990 as his proof that 10 hertz and above cause no transfection.

He says that although Beck settled on 3.9 hertz, he had admitted thatthe deactivation of microbes was not dependant on a specificfrequency. The tests by Lyman and Kaali were actually with zerofrequency- direct current! But DC causes blood cell clumping as wellas transfection. Use of 10 or 40 hertz can be important for cancerpatients if they want to continue to use strong herbs or other strongsupplements.

BioElectric also recommends placing the electrodes wrist-to-wrist orankle-to-ankle in order to be able to use comfortable levels ofelectrical current because most of the current will concentrate itself inthe arteries between the shoulders and in the groin area.

Other companies, such as Sota Instruments, recommend placingelectrodes on one wrist because that is the last recommendationBeck gave. But BioElectric says Beck did that only for conveniencesake and that Beck's own research proved that 97% of the current

was lost by it crossing the wrist instead of going into the arteries!!

Beck admitted that the extreme amount of 3mA (3 milliamps) had tobe applied wrist to wrist in order for the correct amount of current tobe measurable in the forearm artery. BioElectric says that very fewpeople can tolerate that amount of electricity. You can read more athis:


6/6

Safety Issues andBlood Current pages.

Using electrodes wrist to wrist or ankle to ankle only requires amoderate amount of current in the range of .13mA to .25mA as isexplained in his blood current page. This amount is tolerable byeveryone as it poses no threat of skin irritation. The MicrobeElectrifier has a light that comes on when the user has adjusted thecurrent control to acheive a current level within this range.

BioElectric's Microbe Electrifier is definitely off the beaten path of allothers who stick strictly to Becks last recommendations but he backsup all his improvements with research and logic. His philosophy isthat all original ideas can and should be improved upon and that we

shouldn't limit ourselves to original designs. If we did we would all stillbe driving model T Fords.

bob beck protocol - blood purifier

Documents