boilers baseboard radiation finned tube (commercial) radiation … · 2012. 5. 1. · boiler model...

Boilers Baseboard Radiation Finned Tube (Commercial) Radiation Indirect-fired Water Heaters

Updated: April 2009

APR 2009 - 1

Introduction The Gas Appliance Manufacturers Association (GAMA) in 2008 merged with the Air-Conditioning and Refrigeration Institute to become the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). The newly merged association is now home to all of the industry’s equipment certification programs: I=B=R, GAMA Efficiency Rating Certified and ARI Performance Certified. AHRI tests boilers, baseboards, commercial finned tube radiation and indirect-fired water heaters and provides authorization for the use of I=B=R ratings for those products. AHRI is also engaged in other projects and activities to develop reliable technical data for the heating and the building industries, and to assure correct calculation, design, and installations of hydronic systems, providing maximum comfort at minimum cost to the consumer. Some of the projects include:

1. Development of Codes and Standards 2. Research and technical investigations into hydronic theory and practice 3. Publication of technical reports and installation guides reflecting the latest research and practical experience 4. Dissemination of data of value to manufacturers and to the heating industry. The Hydronics Institute

maintains its office and laboratory in its own building in Berkeley Heights, New Jersey About the Directory This directory contains the I=B=R Ratings for cast-iron, steel, aluminum and copper boilers, baseboard and finned tube radiation, indirect-fired water heaters, effective as of the date of this publication. These ratings have been determined under the provisions of the “I=B=R Rating Procedure for Heating Boilers,” “BTS-2000 Testing Standard for Commercial Space Heating Boilers”, “I=B=R Testing and Rating Standard for Baseboard Radiation,” “I=B=R Testing and Rating Standard for Finned Tube Radiation,” “GAMA Testing Standard for Performance of Indirect-Fired Water Heaters,” and “GAMA I=B=R Rating Procedure for Indirect-Fired Waters Heaters,” copies of which are available for purchase. For boilers under 300,000 Btu input, the I=B=R Procedural Guide includes the requirements of the U.S. Department of Energy. Any boilers claiming to have I=B=R ratings, but not listed herein do not have I=B=R approval as of the date of this publication. Visit the AHRI Directory of Certified Product Performance at www.ahridirectory.org to check for updates. The designation “SBI Ratings” has been discontinued. The designation “I=B=R Ratings” is now used for all boilers, regardless of construction material. Boiler model numbers may have prefix and/or suffix letters to indicate variations in the assembly, controls, trim, etc. Refer to the manufacturer’s catalog for an explanation of the letters used. Manufacturer’s catalogs are reviewed by AHRI to assure physical conformance with the product as it was when tested. Boiler ratings shown are for elevations up to 2,000 feet; for elevations above 2,000 feet, consult the manufacturer. Any manufacturer who wishes to submit his boiler for testing and approval under the testing standard may do so, upon payment of applicable fees, regardless of whether they are a member of AHRI. Data shown in this book is only for those manufacturers who elected to participate in AHRI’s rating and licensing program. An alphabetical index is provided at the back of this book of all boiler, baseboard, finned tube, and indirect-fired water heater manufacturers who have current I=B=R ratings for their products. Every effort has been made to assure the accuracy of the data contained in this book and in the other publications issued by AHRI. However, neither AHRI nor those responsible for the preparation of the association’s publications make any representation or guarantee, or assume or accept any responsibility or liability with respect thereto. Use of the I=B=R Emblem The I=B=R emblem is the property of AHRI, registered in its name at the United States Patent and Trademark Office, and the Registrar of Trademarks in Canada. All boilers listed in this book must bear the I=B=R emblem on the manufacturer’s nameplate affixed to the boiler. The emblem is to be used only on the specific models whose ratings have been approved by AHRI. The use of the emblem in

APR 2009 - 2

manufacturers’ literature is limited to those pages or those publications which are entirely devoted to products qualified to display the emblem. No one has permission to state that his product has been tested under the I=B=R Certification Program, or to publish I=B=R Ratings, or to use the I=B=R Emblem in any manner, unless

(a) The manufacturer has executed a license with AHRI, and (b) AHRI has tested the series according to the I=B=R Procedural Guide for Heating Boilers, or GAMA’s I=B=R

Procedural Guide for Indirect-Fired Water Heaters and (c) AHRI has advised the manufacturer in writing of the exact rating applicable to the specific models.

All I=B=R Rated boilers must be manufactured in accordance with the latest edition of Section IV of the ASME Boiler and Pressure Vessel Code covering Heating Boilers.

Why Hydronics Besides the reliability of equipment ratings, and the well-established reliability of hydronic accessories, there are many good reasons why hydronic systems have long been recognized as the standard method for providing indoor comfort. Hydronic heating, whether steam or hot water, provides positive, controlled circulation of the heating medium. Systems are basically self-balancing, and in larger, more complicated heating systems, balancing is positively controlled by familiar valves and thermostats. The life of hydronic equipment is measured in decades; some existing boilers are more than fifty years old. In addition to the high efficiency of boilers (some over 90%), losses through the distribution system are extremely low on modern installations. Temperature control is close to ideal with hydronics. Any well-designed system can provide excellent comfort, without drafts or sharp swings in temperature. The flexibility of hydronic installations permits a variety of piping arrangements, simple or sophisticated controls, and large choice of room distribution units for all comfort applications.

Historical Timeline

1915: National Boiler and Radiation Manufacturers Association is formed by producers of cast iron boilers and radiators. 1929: The name is changed to the Institute of Boiler and Radiator Manufacturers (I=B=R). 1940: Start of 30-year research agreement with the University of Illinois, including 39 research programs which resulted

in many improvements of systems and equipment 1944: Institute broadened to include manufacturers of non-ferrous radiation, and accessories for systems and equipment. 1956: I=B=R Test Laboratory built at Urbana, Illinois and manned by engineers of the University of Illinois. 1963: Manufacturers of Steel heating boilers join to become the Steel Boiler Division. 1970: The Hydronics Institute is formed from the above predecessors. 1983: Burner and Burner Components Division is formed as an operating group within The Institute. 1995: The Hydronics Institute became a Division of GAMA. 2008: GAMA and ARI merged to become the Air-Conditioning, Heating, and Refrigeration Institute.

© Copyright 2009 Air-Conditioning, Heating, and Refrigeration Institute

APR 2009 - 63

TESTING AND RATING PROCEDURES FOR COMMERCIAL FINNED TUBE

The Gas Appliance Manufacturers Association (GAMA) in 2008 merged with the Air-Conditioning and Refrigeration Institute to become the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). The newly merged association is now home to all of the industry’s equipment certification programs: I=B=R, GAMA Efficiency Rating Certified and ARI Performance Certified. This section contains I=B=R Ratings for Finned Tube (Commercial) Radiation, which are in effect as of the date of this publication. These Ratings have been determined under the testing and rating provisions of the I=B=R Standard for Finned Tube (Commercial) Radiation. Any ratings for Finned Tube (Commercial) Radiation which are claimed to be I=B=R Ratings, but which are not listed herein, do not have I=B=R approval as of the date of this publication. NOTE: The terms “Baseboard Radiation” and “Finned Tube (Commercial) Radiation” are defined similarly, except that:

1. Baseboard Radiation is designed for installation at the floor level along the bottom of the walls of rooms, replacing the conventional wood baseboard. (Usually used in residential installations).

2. Finned Tube (Commercial) Radiation is a finned tube element; one, two, or three tiers high designed for installation bare, or with open type grilles, covers, or enclosures having top, front, or inclined outlets. (Usually used for buildings other than residential.)

The following abbreviations have been used throughout the Schedules of Approved Ratings listed in this book. A = Aluminum C = Nominal Copper Tubing S = Steel

Every effort has been made by AHRI to assure the accuracy of the data contained in this Ratings Book and in other I=B=R publications. However, neither AHRI nor those responsible for the preparation of association’s publications, make any representation or guaranty, or assume or accept any responsibility or liability with respect thereto.

HOW I=B=R RATINGS ARE DETERMINED

The current edition of the I=B=R Testing and Rating Standard for Finned Tube (Commercial) Radiation, specifies the conditions under which tests are conducted. They may be conducted initially by the manufacturers, and later check tested in the I=B=R laboratory or all rating tests may be conducted in the I=B=R laboratory. I=B=R Ratings are approved only if the results of the I=B=R laboratory tests indicate that the requested ratings are accurate.

DEFINITIONS Actual Encl. Height (in.): Actual Enclosure Height (inches) Fin Size H x W (in.): Fin Size Height by Width (inches) Heating Effect (%): Percentage of Heating Effect added Tier Spacing: Distance between tiers (inches) Fins per foot: Number of Fins per foot Tiers of Element: Number of Tiers in element

APR 2009 - 64

EXPLANATION OF BASIS OF I=B=R RATINGS FOR FINNED TUBE (COMMERCIAL) RADIATION

STEAM RATINGS

The I=B=R Ratings listed in this book are Steam Ratings in Btuh per foot of active length at 215F steam and 65F inlet air. When the unit is installed as specified in the listings no adjustments to the listed ratings are required. The steam ratings are based on the condensation capacity determined by laboratory tests as prescribed in the I=B=R Standard but include an added percentage, ranging up to 15% depending on the installed height and type of cover or enclosure. The I=B=R Rating includes the factor shown in Table B below for the recommended installed height.

TABLE B

Installed Height Factor 36 or more ........................................................................ 1.00 34 ............................................................................... 1.01 32 ............................................................................... 1.02 30 ............................................................................... 1.03 29 ............................................................................... 1.04 28 ............................................................................... 1.05 27 ............................................................................... 1.06 26 ............................................................................... 1.07 25 ............................................................................... 1.08 24 ............................................................................... 1.09 23 ............................................................................... 1.10 22 ............................................................................... 1.11 21 ............................................................................... 1.12 20 ............................................................................... 1.13 19 ............................................................................... 1.14 18 or less ......................................................................... 1.15

If the unit is to be installed at a difference height than that recommended, the I=B=R Rating must be adjusted as follows: I=B=R Rating Multiplied By:

Factor from Table B for the actual installed height

Factor from Table B For the recommended installed height

INSTALLED HEIGHT

The term “installed height “ is used to define the installed location that is the basis of the rating, as well as to determine the percentage that the manufacturer may add to the condensation capacity. The method of measuring installed height varies depending upon the type of cover or enclosure. It is the vertical distance from the floor to (1) the highest point of a top outlet cover or enclosure, or (2) the center of the outlet of an inclined outlet cover or enclosure. Round outlet enclosures are treated the same as inclined outlet enclosures. The installed height of a bare element is the vertical distance from the floor to the top of the uppermost element. The term “mounting height” is sometimes used, which is the vertical height from the floor to the top of the bare element, cover, or enclosure.

APR 2009 - 65

PERCENTAGES ADDED TO CONDENSATION CAPACITY

When the installed height of a unit is less than 36”, the manufacturer may add a percentage to the condensation capacity to determine the rating. For a bare unit, a unit in an open type grille or cover, and for front outlet enclosures, the maximum percentage is taken directly from Table B. For inclined outlet enclosures, the percentages shown in Table B are multiplied by:

Angle of Outlet to Horizontal

90

(For example, a 45 sloping top enclosure with an installed height of 18” should have a percentage of 45/90 x 15 = 7.5 added to the condensation capacity.) No percentage may be added to the condensation capacity of top outlet enclosures.

WATER RATINGS

Water ratings at various average water temperatures (applicable to water flow rates of three or more feet per second) are determined from Table I at the end of this book. Table I was computed as specified in the Standard using the following factors:

TABLE C

Factors Used to convert I=B=R Steam Ratings to Hot Water Ratings at Temperature Indicated

Average Radiator Temperature Factor

100 .............................................................................. 0.15 110 .............................................................................. 0.20 120 .............................................................................. 0.26 130 .............................................................................. 0.33 140 .............................................................................. 0.40 150 .............................................................................. 0.45 155 .............................................................................. 0.49 160 .............................................................................. 0.53 165 .............................................................................. 0.57 170 .............................................................................. 0.61 175 .............................................................................. 0.65 180 .............................................................................. 0.69 185 .............................................................................. 0.73 190 .............................................................................. 0.78 195 .............................................................................. 0.82 200 .............................................................................. 0.86 205 .............................................................................. 0.91 210 .............................................................................. 0.95 215 .............................................................................. 1.00 220 .............................................................................. 1.05 225 .............................................................................. 1.09 230 .............................................................................. 1.14 235 .............................................................................. 1.20 240 .............................................................................. 1.25

APR 2009 - 66

CORRECTION FACTORS FOR WATER FLOW RATES LESS THAN 3 FEET PER SECOND

The factors in Table I may be used only when the water flow rate through the finned tube unit is known and where the flow rate is not less than 3 feet per second. To determine the output at less than 3 feet per second, multiply the I=B=R Water Rating by the factor in this Table which applies to the known flow rate.

TABLE D

Factors for Determining Outputs at Water Flow Rates of less than 3 feet per second

Flow Rate Factor

3.00 ............................................................................ 1.000 2.75 ............................................................................ 0.996 2.50 ............................................................................ 0.992 2.25 ............................................................................ 0.988 2.00 ............................................................................ 0.984 1.75 ............................................................................ 0.979 1.50 ............................................................................ 0.973 1.25 ............................................................................ 0.966 1.00 ............................................................................ 0.957 0.75 ............................................................................ 0.946 0.50 ............................................................................ 0.931 0.25 ............................................................................ 0.905

RATINGS FOR UNITS WITH FLAT TOP COVERS Table J should be used to determine Flat Top Cover steam ratings for those manufacturers who have received approval to use the code factors (as noted in this listing). Water ratings for such units can then be obtained by applying Table I to the steam rating determined from Table J.

RATINGS FOR UNITS WITH EXPANDED METAL COVERS Table K should be used to determine the Expanded Metal Cover steam ratings for those manufacturers who have received approval of an expanded metal cover factor (as noted in their listing). Water ratings for such units can then be obtained by applying Table I to the steam rating determined from Table J.

RELATIONSHIP OF DIMENSIONS TO OUTPUT Experience has demonstrated that variations in dimensions can have a serious effect on the output of a unit. The Standard specifies that manufacturer’s literature must list the details of the unit to which the I=B=R ratings apply including:

1. Fin size, nominal thickness, nominal spacing (fins per foot) and external finish of finned tube element; i.e., unpainted or painted (including color of paint).

2. Recommended installed height (the installed height upon which the I=B=R rating is based). 3. In the case of multiple tier assemblies of finned tube elements, the distance between centers of the tiers on which the

ratings are based. 4. A statement that ratings are based on active length. 5. The difference between active length and total length expressed in inches. 6. A cross-sectional drawing indicating essential dimensions, including the height and depth of enclosure, size of inlet

and outlet openings and the location of the element with respect to the enclosure. It is important that a check be made to assure that the radiation delivered conforms to the dimensions ordered. It is also important that the radiation be installed in accordance with the manufacturer’s instructions.

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

AIREDALE

I=B=R Steam Ratings in btuh/ft of active length at 215F steam, 65F air. Ratings approved for use with hot water (Table I).

Bare Element 1110 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 34 15None 1890 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 34 15None 2480 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1250 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2120 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2790 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1390 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 50 15None 2360 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 50 15None 3090 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1350 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 34 15None 1480 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 42 15None 2840 2 15-1/463/4"C 4-1/4 x 4-1/4 .018"A 42 15None 3720 3 21-1/463/4"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1610 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 50 15None 1110 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 34 15None 1880 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 34 15None 2470 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1240 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 42 15None 2100 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 42 15None 2760 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1370 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 50 15None 2330 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 50 15None 3060 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1400 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 34 15None 1530 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 42 15None 2770 2 15-1/461"C 4-1/4 x 4-1/4 .018"A 42 15None 3630 3 21-1/461"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1640 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 50 15None 1110 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 34 15None 1890 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 34 15None 2480 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1230 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2100 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2740 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1350 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 50 15None 2300 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 50 15None 3010 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1450 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 34 15None 1580 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 42 15None 2690 2 15-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 42 15None 3520 3 21-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1670 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 50 15None 2670 2 15-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 50 15None 3480 3 21-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 50 11.75None

Front Outlet - (F412) Louvered 1610 1 15-1/163/4"C 4-1/4 x 4-1/4 .018"A 50 15None 12

Front/Top - (R412) Louvered 1670 1 13-7/83/4"C 4-1/4 x 4-1/4 .018"A 50 7.50None 12

Inclined Outlet - Louvered 1230 1 133/4"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1400 1 133/4"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1580 1 133/4"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 133/4"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1620 1 133/4"C 4-1/4 x 4-1/4 .018"A 50 10None 12 1220 1 131"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1390 1 131"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1560 1 131"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 131"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1680 1 131"C 4-1/4 x 4-1/4 .018"A 50 10None 12 1200 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1370 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1540 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 131-1/4"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1730 1 131-1/4"C 4-1/4 x 4-1/4 .018"A 50 10None 12 2120 1 191-1/4"C 4-1/4 x 4-1/4 .018"A 50 9.33None 18 2240 1 251-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24 3000 2 25121-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24 2890 2 2561-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24

Top Outlet - (Pedestal Style-P41) Louvered 1390 1 10-3/43/4"C 4-1/4 x 4-1/4 .018"A 50 0None

Top Outlet - (Pedestal Style-PA41) 1310 1 10-1/43/4"C 4-1/4 x 4-1/4 .018"A 50 0None

Top Outlet - (TA412) 1600 1 15-1/23/4"C 4-1/4 x 4-1/4 .018"A 50 0None 12

Top Outlet - Louvered 1490 1 15-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 12 1760 1 21-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 18 1810 1 27-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 24

TRIMFINInclined Outlet - Louvered

1290 1 14-1/43/4"C 2-3/4 x 3-1/4 .018"A 50 10None 14 860 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 10 910 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 1420 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 840 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 8 950 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1040 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1480 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 910 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 8 1040 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1160 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1540 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 980 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 8 960 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 34 10None 10 1030 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1040 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1100 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1130 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1170 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 50 10None 14 850 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 34 10None 10 900 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 34 10None 14 1370 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 34 10None 14 820 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 34 10None 8 930 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1020 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1410 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 42 10None 14 880 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 42 10None 8 1010 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1130 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1450 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 50 10None 14 940 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 50 10None 8 950 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 34 10None 10 1010 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1030 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1080 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1110 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1160 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 50 10None 14 840 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 10 890 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 1310 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 810 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 8 910 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1000 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1340 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 860 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 8 980 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1110 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1360 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 910 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 8 940 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 34 10None 10 980 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1020 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1060 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1100 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1140 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 50 10None 14

MODINE MANUFACTURING COMPANY


Bare Element 1110 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 34 15None 1890 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 34 15None 2480 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1250 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2120 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2790 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1390 1 6-11/163/4"C 2-3/4 x 4-1/4 .018"A 50 15None 2360 2 12-11/1663/4"C 2-3/4 x 4-1/4 .018"A 50 15None 3090 3 18-11/1663/4"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1350 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 34 15None

JAN 2010 - 67

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

MODINE MANUFACTURING COMPANYBare Element

1480 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 42 15None 2840 2 15-1/463/4"C 4-1/4 x 4-1/4 .018"A 42 15None 3720 3 21-1/463/4"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1610 1 9-1/43/4"C 4-1/4 x 4-1/4 .018"A 50 15None 1110 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 34 15None 1880 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 34 15None 2470 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1240 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 42 15None 2100 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 42 15None 2760 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1370 1 6-11/161"C 2-3/4 x 4-1/4 .018"A 50 15None 2330 2 12-11/1661"C 2-3/4 x 4-1/4 .018"A 50 15None 3060 3 18-11/1661"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1400 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 34 15None 1530 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 42 15None 2770 2 15-1/461"C 4-1/4 x 4-1/4 .018"A 42 15None 3630 3 21-1/461"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1640 1 9-1/41"C 4-1/4 x 4-1/4 .018"A 50 15None 1110 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 34 15None 1890 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 34 15None 2480 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 34 14.31None 1230 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2100 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 42 15None 2740 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 42 14.31None 1350 1 6-11/161-1/4"C 2-3/4 x 4-1/4 .018"A 50 15None 2300 2 12-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 50 15None 3010 3 18-11/1661-1/4"C 2-3/4 x 4-1/4 .018"A 50 14.31None 1450 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 34 15None 1580 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 42 15None 2690 2 15-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 42 15None 3520 3 21-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 42 11.75None 1670 1 9-1/41-1/4"C 4-1/4 x 4-1/4 .018"A 50 15None 2670 2 15-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 50 15None 3480 3 21-1/461-1/4"C 4-1/4 x 4-1/4 .018"A 50 11.75None

Front Outlet - (F412) Louvered 1610 1 15-1/163/4"C 4-1/4 x 4-1/4 .018"A 50 15None 12

Front/Top - (R412) Louvered 1670 1 13-7/83/4"C 4-1/4 x 4-1/4 .018"A 50 7.50None 12

Inclined Outlet - Louvered 1230 1 133/4"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1400 1 133/4"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1580 1 133/4"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 133/4"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1620 1 133/4"C 4-1/4 x 4-1/4 .018"A 50 10None 12 1220 1 131"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1390 1 131"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1560 1 131"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 131"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1680 1 131"C 4-1/4 x 4-1/4 .018"A 50 10None 12 1200 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 34 10None 12 1370 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 42 10None 12 1540 1 131-1/4"C 2-3/4 x 4-1/4 .018"A 50 10None 12 1610 1 131-1/4"C 4-1/4 x 4-1/4 .018"A 42 10None 12 1730 1 131-1/4"C 4-1/4 x 4-1/4 .018"A 50 10None 12 2120 1 191-1/4"C 4-1/4 x 4-1/4 .018"A 50 9.33None 18 2240 1 251-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24 2890 2 2561-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24 3000 2 25121-1/4"C 4-1/4 x 4-1/4 .018"A 50 5.33None 24

Top Outlet - (Pedestal Style-P41) Louvered 1390 1 10-3/43/4"C 4-1/4 x 4-1/4 .018"A 50 0None 6-3/4

Top Outlet - (Pedestal Style-PA41) 1310 1 10-1/43/4"C 4-1/4 x 4-1/4 .018"A 50 0None 6-3/4

Top Outlet - (TA412) 1600 1 15-1/23/4"C 4-1/4 x 4-1/4 .018"A 50 0None 12

Top Outlet - Louvered 1490 1 15-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 12 1760 1 21-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 18 1810 1 27-15/163/4"C 4-1/4 x 4-1/4 .018"A 50 0None 24

TRIMFINInclined Outlet - Louvered

1290 1 14-1/43/4"C 2-3/4 x 3-1/4 .018"A 50 10None 14 860 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 10 910 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14

1420 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 840 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 34 10None 8 950 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1040 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1480 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 910 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 42 10None 8 1040 1 10-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1160 1 14-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1540 2 14-1/45-1/163/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 980 1 8-1/43/4"C 3-1/4 x 2-3/4 .018"A 50 10None 8 960 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 34 10None 10 1030 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1040 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1100 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1130 1 10-1/43/4"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1170 1 14-1/83/4"C 4-1/4 x 2-3/4 .018"A 50 10None 14 850 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 34 10None 10 900 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 34 10None 14 1370 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 34 0None 14 820 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 34 10None 8 930 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1020 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1410 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 42 10None 14 880 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 42 10None 8 1010 1 10-1/41"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1130 1 14-1/81"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1450 2 14-1/85-1/161"C 3-1/4 x 2-3/4 .018"A 50 10None 14 940 1 8-1/41"C 3-1/4 x 2-3/4 .018"A 50 10None 8 950 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 34 10None 10 1010 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1030 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1080 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1110 1 10-1/41"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1160 1 14-1/81"C 4-1/4 x 2-3/4 .018"A 50 10None 14 840 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 10 890 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 1310 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 14 810 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 34 10None 8 910 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 10 1000 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 1340 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 14 860 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 42 10None 8 980 1 10-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 10 1110 1 14-1/81-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 1360 2 14-1/85-1/161-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 14 910 1 8-1/41-1/4"C 3-1/4 x 2-3/4 .018"A 50 10None 8 940 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 34 10None 10 980 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 34 10None 14 1020 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 42 10None 10 1060 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 42 10None 14 1100 1 10-1/41-1/4"C 4-1/4 x 2-3/4 .018"A 50 10None 10 1140 1 14-1/81-1/4"C 4-1/4 x 2-3/4 .018"A 50 10None 14

RITTLINGDIVISION OF HYDRO-AIR COMPONENTS

Bare Element - Rittling 1850 2 14-7/863/4"C 2-3/4 x 4 .016"A 32 15None 2620 3 20-7/863/4"C 2-3/4 x 4 .016"A 32 12.13None 2030 2 14-7/863/4"C 2-3/4 x 4 .016"A 40 15None 2840 3 20-7/863/4"C 2-3/4 x 4 .016"A 40 12.13None 2220 2 14-7/863/4"C 2-3/4 x 4 .016"A 48 15None 3050 3 20-7/863/4"C 2-3/4 x 4 .016"A 48 12.13None 2400 3 20-7/863/4"C 3-1/4 x 3-1/4 .016"A 32 12.13None 1700 2 14-7/863/4"C 3-1/4 x 3-1/4 .016"A 32 15None 1830 2 14-7/863/4"C 3-1/4 x 3-1/4 .016"A 40 15None 2540 3 20-7/863/4"C 3-1/4 x 3-1/4 .016"A 40 12.13None 1960 2 14-7/863/4"C 3-1/4 x 3-1/4 .016"A 48 15None 2670 3 20-7/863/4"C 3-1/4 x 3-1/4 .016"A 48 12.13None 2160 2 14-7/863/4"C 4-1/4 x 4-1/4 .016"A 32 15None 2990 3 20-7/863/4"C 4-1/4 x 4-1/4 .016"A 32 12.13None 3080 3 20-7/863/4"C 4-1/4 x 4-1/4 .016"A 40 12.13None 2290 2 14-7/863/4"C 4-1/4 x 4-1/4 .016"A 40 15None 2420 2 14-7/863/4"C 4-1/4 x 4-1/4 .016"A 48 15None 3160 3 20-7/863/4"C 4-1/4 x 4-1/4 .016"A 48 12.13None 2610 3 20-7/861"C 2-3/4 x 4 .016"A 32 12.13None 1850 2 14-7/861"C 2-3/4 x 4 .016"A 32 15None 2820 3 20-7/861"C 2-3/4 x 4 .016"A 40 12.13None 2020 2 14-7/861"C 2-3/4 x 4 .016"A 40 15None 2200 2 14-7/861"C 2-3/4 x 4 .016"A 48 15None 3020 3 20-7/861"C 2-3/4 x 4 .016"A 48 12.13None

JAN 2010 - 68

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

RITTLINGDIVISION OF HYDRO-AIR COMPONENTS

Bare Element - Rittling 2350 3 20-7/861"C 3-1/4 x 3-1/4 .016"A 32 12.13None 1690 2 14-7/861"C 3-1/4 x 3-1/4 .016"A 32 15None 1830 2 14-7/861"C 3-1/4 x 3-1/4 .016"A 40 15None 2480 3 20-7/861"C 3-1/4 x 3-1/4 .016"A 40 12.13None 1940 2 14-7/861"C 3-1/4 x 3-1/4 .016"A 48 15None 2600 3 20-7/861"C 3-1/4 x 3-1/4 .016"A 48 12.13None 2300 2 14-7/861"C 4-1/4 x 4-1/4 .016"A 32 15None 3130 3 20-7/861"C 4-1/4 x 4-1/4 .016"A 32 12.13None 2440 2 14-7/861"C 4-1/4 x 4-1/4 .016"A 40 15None 3250 3 20-7/861"C 4-1/4 x 4-1/4 .016"A 40 12.13None 2550 2 14-7/861"C 4-1/4 x 4-1/4 .016"A 48 15None 3330 3 20-7/861"C 4-1/4 x 4-1/4 .016"A 48 12.13None 2610 3 20-7/861-1/4"C 2-3/4 x 4 .016"A 32 12.13None 1840 2 14-7/861-1/4"C 2-3/4 x 4 .016"A 32 15None 2800 3 20-7/861-1/4"C 2-3/4 x 4 .016"A 40 12.13None 2010 2 14-7/861-1/4"C 2-3/4 x 4 .016"A 40 15None 2170 2 14-7/861-1/4"C 2-3/4 x 4 .016"A 48 15None 2980 3 20-7/861-1/4"C 2-3/4 x 4 .016"A 48 12.13None 2300 3 20-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 32 12.13None 1680 2 14-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 32 15None 2430 3 20-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 40 12.13None 1820 2 14-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 40 15None 1920 2 14-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 48 15None 2520 3 20-7/861-1/4"C 3-1/4 x 3-1/4 .016"A 48 12.13None 2440 2 14-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 32 15None 3270 3 20-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 32 12.13None 3430 3 20-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 40 12.13None 2600 2 14-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 40 15None 2680 2 14-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 48 15None 3510 3 20-7/861-1/4"C 4-1/4 x 4-1/4 .016"A 48 12.13None 2150 3 20-7/861"S 3-1/4 x 3-1/4 .029"S 32 12.13Galv* 1550 2 14-7/861"S 3-1/4 x 3-1/4 .029"S 32 15Galv* 2280 3 20-7/861"S 3-1/4 x 3-1/4 .029"S 40 12.13Galv* 1650 2 14-7/861"S 3-1/4 x 3-1/4 .029"S 40 15Galv* 2400 3 20-7/861"S 3-1/4 x 3-1/4 .029"S 48 12.13Galv* 1740 2 14-7/861"S 3-1/4 x 3-1/4 .029"S 48 15Galv* 2010 2 14-7/861"S 4-1/4 x 4-1/4 .029"S 32 15Galv* 2810 3 20-7/861"S 4-1/4 x 4-1/4 .029"S 32 12.13Galv* 2820 3 20-7/861"S 4-1/4 x 4-1/4 .029"S 40 12.13Galv* 2070 2 14-7/861"S 4-1/4 x 4-1/4 .029"S 40 15Galv* 2130 2 14-7/861"S 4-1/4 x 4-1/4 .029"S 48 15Galv* 2830 3 20-7/861"S 4-1/4 x 4-1/4 .029"S 48 12.13Galv* 1990 2 14-7/862"S 4-1/4 x 4-1/4 .029"S 48 15Galv* 2610 3 20-7/862"S 4-1/4 x 4-1/4 .029"S 48 12.13Galv*

*Galv. = Galvanized


Bare Element 1010 1 8-7/83/4"C 2-3/4 x 4 .016"A 32 15None 1160 1 8-7/83/4"C 2-3/4 x 4 .016"A 40 15None 1310 1 8-7/83/4"C 2-3/4 x 4 .016"A 48 15None 940 1 8-7/83/4"C 3-1/4 x 3-1/4 .016"A 32 15None 1060 1 8-7/83/4"C 3-1/4 x 3-1/4 .016"A 40 15None 1190 1 8-7/83/4"C 3-1/4 x 3-1/4 .016"A 48 15None 1260 1 8-7/83/4"C 4-1/4 x 4-1/4 .016"A 32 15None 1420 1 8-7/83/4"C 4-1/4 x 4-1/4 .016"A 40 15None 1590 1 8-7/83/4"C 4-1/4 x 4-1/4 .016"A 48 15None 1010 1 8-7/81"C 2-3/4 x 4 .016"A 32 15None 1190 1 8-7/81"C 2-3/4 x 4 .016"A 40 15None 1300 1 8-7/81"C 2-3/4 x 4 .016"A 48 15None 930 1 8-7/81"C 3-1/4 x 3-1/4 .016"A 32 15None 1050 1 8-7/81"C 3-1/4 x 3-1/4 .016"A 40 15None 1210 1 8-7/81"C 3-1/4 x 3-1/4 .016"A 48 15None 1300 1 8-7/81"C 4-1/4 x 4-1/4 .016"A 32 15None 1460 1 8-7/81"C 4-1/4 x 4-1/4 .016"A 40 15None 1620 1 8-7/81"C 4-1/4 x 4-1/4 .016"A 48 15None 1010 1 8-7/81-1/4"C 2-3/4 x 4 .016"A 32 15None 1150 1 8-7/81-1/4"C 2-3/4 x 4 .016"A 40 15None 1290 1 8-7/81-1/4"C 2-3/4 x 4 .016"A 48 15None 920 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .016"A 32 15None 1030 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .016"A 40 15None 1130 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .016"A 48 15None 1350 1 8-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 32 15None 1500 1 8-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 40 15None 1650 1 8-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 48 15None

890 1 8-7/81"S 3-1/4 x 3-1/4 .029"S 32 15Galv* 960 1 8-7/81"S 3-1/4 x 3-1/4 .029"S 40 15Galv* 1030 1 8-7/81"S 3-1/4 x 3-1/4 .029"S 48 15Galv* 1140 1 8-7/81"S 4-1/4 x 4-1/4 .029"S 32 15Galv* 1250 1 8-7/81"S 4-1/4 x 4-1/4 .029"S 40 15Galv* 1360 1 8-7/81"S 4-1/4 x 4-1/4 .029"S 48 15Galv* 870 1 8-7/81-1/4"S 3-1/4 x 3-1/4 .029"S 32 15Galv* 930 1 8-7/81-1/4"S 3-1/4 x 3-1/4 .029"S 40 15Galv* 980 1 8-7/81-1/4"S 3-1/4 x 3-1/4 .029"S 48 15Galv* 1130 1 8-7/81-1/4"S 4-1/4 x 4-1/4 .029"S 32 15Galv* 1240 1 8-7/81-1/4"S 4-1/4 x 4-1/4 .029"S 40 15Galv* 1350 1 8-7/81-1/4"S 4-1/4 x 4-1/4 .029"S 48 15Galv* 1090 1 8-7/82"S 4-1/4 x 4-1/4 .029"S 32 15Galv* 1200 1 8-7/82"S 4-1/4 x 4-1/4 .029"S 40 15Galv* 1310 1 8-7/82"S 4-1/4 x 4-1/4 .029"S 48 15Galv*

*Galv. = Galvanized

SIGMA CORP.Bare Element - Sigma

1490 1 8-7/81"C 4 x 4 .016"A 49 15None 1520 1 9-3/321-1/4"C 4 x 4 .016"A 49 15None


WALL FINBare Element

1040 1 8-11/163/4"C 2-3/4 x 3 .016"A 49 15None 1310 1 8-11/163/4"C 2-3/4 x 4 .016"A 49 15None 1350 1 8-11/163/4"C 3 x 4 .016"A 49 15None 1460 1 8-11/163/4"C 4 x 4 .016"A 49 15None 1540 1 8-11/163/4"C 4 x 4 .020"A 49 15None 990 1 8-7/81"C 2-3/4 x 3 .016"A 49 15None 1270 1 8-7/81"C 2-3/4 x 4 .016"A 49 15None 1330 1 8-7/81"C 3 x 4 .016"A 49 15None 1580 1 8-7/81"C 4 x 4 .020"A 49 15None 940 1 9-3/321-1/4"C 2-3/4 x 3 .016"A 49 15None 1240 1 9-3/321-1/4"C 2-3/4 x 4 .016"A 49 15None 1310 1 9-3/321-1/4"C 3 x 4 .016"A 49 15None 1620 1 9-3/321-1/4"C 4 x 4 .020"A 49 15None

Inclined Outlet - Louvered 1670 1 13-1/41-1/4"C 4 x 4 .020"A 49 10None 12 1970 1 19-1/41-1/4"C 4 x 4 .020"A 49 9.17None 18 2200 1 25-1/41-1/4"C 4 x 4 .020"A 49 5.17None 24

SLANT/FIN CORPORATION


Bare Element 1090 1 5-1/23/4"C 3 x 3-1/4 .024"A 48 15None 1610 1 103/4"C 4-1/4 x 4-1/4 .020"A 40.2 15None 1650 1 101"C 4-1/4 x 4-1/4 .020"A 40.2 15None 940 1 5-1/21-1/4"C 3 x 3-1/4 .020"A 48 15None 1700 1 101-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 15None 850 1 5-7/161-1/4"S 3 x 3-1/4 .028"S 48 15Galv* 1080 1 101-1/4"S 4-1/4 x 4-1/4 .024"S 32 15Galv* 1300 1 101-1/4"S 4-1/4 x 4-1/4 .024"S 40 15Galv* 1130 1 102"S 4-1/4 x 4-1/4 .024"S 32 15Galv*

NOTE: Ratings are without optional back panel.*Galv. = Galvanized

Front Outlet - Louvered 1710 1 16-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 15None 14 1280 1 16-7/81-1/4"S 4-1/4 x 4-1/4 .024"S 40 15Alum* 14

NOTE: Ratings are without optional back panel.*Alum. = Aluminized

Front/Top - Louvered 1910 1 15-15/161-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 7.50None 14 2850 2 22-15/1671-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 5None 21 3500 3 29-15/1671-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 1.50None 28 1320 1 15-15/161-1/4"S 4-1/4 x 4-1/4 .024"S 40 7.50Alum* 14


Inclined Outlet - Louvered 1820 1 15-23/321-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 10None 14 1200 1 15-23/321-1/4"S 4-1/4 x 4-1/4 .024"S 40 10Alum* 14


JAN 2010 - 69

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

SLANT/FIN CORPORATIONTop Outlet - Louvered

1690 1 18-3/161-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 0None 14 1620 1 14-1/161-1/4"C 4-1/4 x 4-1/4 .020"A 40.2 0None 9-7/8 1190 1 18-3/161-1/4"S 4-1/4 x 4-1/4 .024"S 40 0Alum* 14 1210 1 14-1/161-1/4"S 4-1/4 x 4-1/4 .024"S 40 0Alum* 9-7/8


STERLING HYDRONICSDIVISION OF MESTEK, INC.

Bare Element - Sterling 1270 1 8-7/81"C 2-3/4 x 3-3/4 .0135"A 50 15None 1610 1 8-7/81"C 2-3/4 x 5 .020"A 50 15None 1250 1 8-7/81-1/4"C 2-3/4 x 3-3/4 .020"A 50 15None 1600 1 8-7/81-1/4"C 2-3/4 x 5 .020"A 50 15None

I=B=R Steam Ratings in btuh/ft of active length at 215F steam, 65F air. Ratings approved for use with hot water (Table I). Bare element ratings approved for flat top cover (Table J) and .96 expanded metal cover factor (Table K).

CLASSIC SLIMLINETop Outlet - (JVK-AR11) Louvered

1030 1 14-15/163/4"C 2-1/2 x 2-3/4 .010"A 60 0None 11 1170 1 14-15/161"C 5 x 2-3/4 .020"A 50 0None 11

VERSA-LINEBare Element

1280 1 8-7/83/4"C 2-3/4 x 3-3/4 .0135"A 50 15None 970 1 8-7/83/4"C 3-1/4 x 3-1/4 .020"A 32 15None 1140 1 8-7/83/4"C 3-1/4 x 3-1/4 .020"A 40 15None 1260 1 8-7/83/4"C 3-1/4 x 3-1/4 .020"A 50 15None 1210 1 9-3/83/4"C 3-5/8 x 4-1/4 .020"A 32 15None 1450 1 9-3/83/4"C 3-5/8 x 4-1/4 .020"A 40 15None 1600 1 9-3/83/4"C 3-5/8 x 4-1/4 .020"A 50 15None 970 1 8-7/81"C 3-1/4 x 3-1/4 .020"A 32 15None 1080 1 8-7/81"C 3-1/4 x 3-1/4 .020"A 40 15None 1210 1 8-7/81"C 3-1/4 x 3-1/4 .020"A 50 15None 1260 1 9-3/81"C 3-5/8 x 4-1/4 .020"A 32 15None 1410 1 9-3/81"C 3-5/8 x 4-1/4 .020"A 40 15None 1600 1 9-3/81"C 3-5/8 x 4-1/4 .020"A 50 15None 1340 1 9-3/81"C 4-1/4 x 4-1/4 .020"A 32 15None 1490 1 9-3/81"C 4-1/4 x 4-1/4 .020"A 40 15None 1680 1 9-3/81"C 4-1/4 x 4-1/4 .020"A 50 15None 970 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 32 15None 1060 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 40 15None 1170 1 8-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 50 15None 1310 1 9-3/81-1/4"C 3-5/8 x 4-1/4 .020"A 32 15None 1440 1 9-3/81-1/4"C 3-5/8 x 4-1/4 .020"A 40 15None 1600 1 9-3/81-1/4"C 3-5/8 x 4-1/4 .020"A 50 15None 1400 1 9-3/81-1/4"C 4-1/4 x 4-1/4 .020"A 32 15None 1660 1 9-3/81-1/4"C 4-1/4 x 4-1/4 .020"A 40 15None 2680 2 15-3/861-1/4"C 4-1/4 x 4-1/4 .020"A 40 15None 3490 3 21-3/861-1/4"C 4-1/4 x 4-1/4 .020"A 40 11.60None 1710 1 9-3/81-1/4"C 4-1/4 x 4-1/4 .020"A 50 15None 2460 2 15-3/861-1/4"C 4-1/4 x 4-1/4 .020"A 50 15None 3200 3 21-3/861-1/4"C 4-1/4 x 4-1/4 .020"A 50 11.60None 1310 1 9-3/81-1/4"S 4-1/4 x 4-1/4 .032"S 32 15Black 2300 2 15-3/861-1/4"S 4-1/4 x 4-1/4 .032"S 32 15Black 3030 3 21-3/861-1/4"S 4-1/4 x 4-1/4 .032"S 32 11.60Black 1480 1 9-3/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 15Black 2440 2 15-3/861-1/4"S 4-1/4 x 4-1/4 .032"S 40 15Black 3170 3 21-3/861-1/4"S 4-1/4 x 4-1/4 .032"S 40 11.60Black 1140 1 9-3/82"S 4-1/4 x 4-1/4 .032"S 25 15Black 2030 2 15-3/862"S 4-1/4 x 4-1/4 .032"S 25 15Black 2700 3 21-3/862"S 4-1/4 x 4-1/4 .032"S 25 11.60Black 1320 1 9-3/82"S 4-1/4 x 4-1/4 .032"S 32 15Black 2230 2 15-3/862"S 4-1/4 x 4-1/4 .032"S 32 15Black 2910 3 21-3/862"S 4-1/4 x 4-1/4 .032"S 32 11.60Black

Front Outlet - (JVB-F) Louvered 1320 1 17-1/81-1/4"C 3-5/8 x 4-1/4 .020"A 32 15None 14 1370 1 23-1/81-1/4"C 3-5/8 x 4-1/4 .020"A 32 9.88None 20 2140 2 23-1/861-1/4"C 3-5/8 x 4-1/4 .020"A 32 9.88None 20 1410 1 27-1/81-1/4"C 3-5/8 x 4-1/4 .020"A 32 5.88None 24 2200 2 27-1/861-1/4"C 3-5/8 x 4-1/4 .020"A 32 5.88None 24 1360 1 17-1/81-1/4"S 4-1/4 x 4-1/4 .032"S 32 15Black 14 1370 1 23-1/81-1/4"S 4-1/4 x 4-1/4 .032"S 32 9.88Black 20 2190 2 23-1/861-1/4"S 4-1/4 x 4-1/4 .032"S 32 9.88Black 20

1380 1 27-1/81-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24 2230 2 27-1/861-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24 2290 2 27-1/8101-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24 1620 1 23-1/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 9.88Black 20 2350 2 23-1/861-1/4"S 4-1/4 x 4-1/4 .032"S 40 9.88Black 20 1660 1 27-1/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.88Black 24 2400 2 27-1/861-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.88Black 24 2520 2 27-1/8101-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.88Black 24 1210 1 17-1/82"S 4-1/4 x 4-1/4 .032"S 25 15Black 14 1220 1 23-1/82"S 4-1/4 x 4-1/4 .032"S 25 9.88Black 20 1910 2 23-1/862"S 4-1/4 x 4-1/4 .032"S 25 9.88Black 20 1230 1 27-1/82"S 4-1/4 x 4-1/4 .032"S 25 5.88Black 24 1940 2 27-1/862"S 4-1/4 x 4-1/4 .032"S 25 5.88Black 24 2020 2 27-1/8102"S 4-1/4 x 4-1/4 .032"S 25 5.88Black 24 1380 1 17-1/82"S 4-1/4 x 4-1/4 .032"S 32 15Black 14 1420 1 23-1/82"S 4-1/4 x 4-1/4 .032"S 32 9.88Black 20 2130 2 23-1/862"S 4-1/4 x 4-1/4 .032"S 32 9.88Black 20 1450 1 27-1/82"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24 2170 2 27-1/862"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24 2240 2 27-1/8102"S 4-1/4 x 4-1/4 .032"S 32 5.88Black 24

Front/Top - (JVA-FT) Louvered 1290 1 16-5/321"C 3-1/4 x 3-1/4 .020"A 50 8.89None 14

Front/Top - (JVB-FT) Louvered 1250 1 16-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 32 7.50None 14 1300 1 22-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 32 5.42None 20 1990 2 22-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 32 5.42None 20 1350 1 26-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 32 3.42None 24 2050 2 26-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 32 3.42None 24 1630 1 16-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 40 7.50None 14 1740 1 22-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 40 5.42None 20 2440 2 22-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 40 5.42None 20 1780 1 26-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 40 3.42None 24 2520 2 26-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 40 3.42None 24 1820 1 16-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 7.50None 14 1970 1 22-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 5.42None 20 2460 2 22-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 50 5.42None 20 2040 1 26-5/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 3.42None 24 2620 2 26-5/3261-1/4"C 3-5/8 x 4-1/4 .020"A 50 3.42None 24 2720 2 26-5/32101-1/4"C 3-5/8 x 4-1/4 .020"A 50 3.42None 24 1290 1 16-5/321-1/4"S 4-1/4 x 4-1/4 .032"S 32 7.50Black 14 1320 1 22-5/321-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.42Black 20 2060 2 22-5/3261-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.42Black 20 1340 1 26-5/321-1/4"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24 2100 2 26-5/3261-1/4"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24 2200 2 26-5/32101-1/4"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24 1190 1 22-5/322"S 4-1/4 x 4-1/4 .032"S 25 5.42Black 20 1870 2 22-5/3262"S 4-1/4 x 4-1/4 .032"S 25 5.42Black 20 1210 1 26-5/322"S 4-1/4 x 4-1/4 .032"S 25 3.42Black 24 1920 2 26-5/3262"S 4-1/4 x 4-1/4 .032"S 25 3.42Black 24 1990 2 26-5/32102"S 4-1/4 x 4-1/4 .032"S 25 3.42Black 24 1300 1 16-5/322"S 4-1/4 x 4-1/4 .032"S 32 7.50Black 14 1350 1 22-5/322"S 4-1/4 x 4-1/4 .032"S 32 5.42Black 20 2020 2 22-5/3262"S 4-1/4 x 4-1/4 .032"S 32 5.42Black 20 1380 1 26-5/322"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24 2090 2 26-5/3262"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24 2180 2 26-5/32102"S 4-1/4 x 4-1/4 .032"S 32 3.42Black 24

Inclined Outlet - (Guardian) GSBS Fully Perforated 2520 2 19-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 7.78None 18

Inclined Outlet - (Guardian) GSBS-P Partially Perforated 1790 1 19-3/43/4"C 3-5/8 x 4-1/4 .020"A 50 7.33None 18 2350 2 19-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 7.33None 18 1540 1 13-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 50 8.33None 12 1940 1 19-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 50 7.33None 18

Inclined Outlet - (JVA-S) Louvered 1370 1 161"C 3-1/4 x 3-1/4 .020"A 50 10None 14

Inclined Outlet - (JVB-S) Louvered 1450 1 15-3/161-1/4"C 3-5/8 x 4-1/4 .020"A 32 10None 14 1530 1 21-3/161-1/4"C 3-5/8 x 4-1/4 .020"A 32 7.88None 20 2360 2 21-3/1661-1/4"C 3-5/8 x 4-1/4 .020"A 32 7.88None 20 2450 2 25-3/1661-1/4"C 3-5/8 x 4-1/4 .020"A 32 5.21None 24 1860 1 15-3/161-1/4"C 3-5/8 x 4-1/4 .020"A 50 10None 14 2130 1 21-3/161-1/4"C 3-5/8 x 4-1/4 .020"A 50 7.88None 20 2510 2 21-3/1661-1/4"C 3-5/8 x 4-1/4 .020"A 50 7.88None 20 2270 1 25-3/161-1/4"C 3-5/8 x 4-1/4 .020"A 50 5.21None 24 2810 2 25-3/1661-1/4"C 3-5/8 x 4-1/4 .020"A 50 5.21None 24 2900 2 25-3/16101-1/4"C 3-5/8 x 4-1/4 .020"A 50 5.21None 24 1330 1 15-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 10Black 14 1380 1 21-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 7.88Black 20

JAN 2010 - 70

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

STERLING HYDRONICSDIVISION OF MESTEK, INC.

VERSA-LINEInclined Outlet - (JVB-S) Louvered

2050 2 21-3/1661-1/4"S 4-1/4 x 4-1/4 .032"S 32 7.88Black 20 1420 1 25-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.21Black 24 2140 2 25-3/1661-1/4"S 4-1/4 x 4-1/4 .032"S 32 5.21Black 24 1460 1 15-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 10Black 14 1550 1 21-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 7.88Black 20 2210 2 21-3/1661-1/4"S 4-1/4 x 4-1/4 .032"S 40 7.88Black 20 1610 1 25-3/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.21Black 24 2310 2 25-3/1661-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.21Black 24 1130 1 15-3/162"S 4-1/4 x 4-1/4 .032"S 25 10Black 14 1160 1 21-3/162"S 4-1/4 x 4-1/4 .032"S 25 7.88Black 20 1830 2 21-3/1662"S 4-1/4 x 4-1/4 .032"S 25 7.88Black 20 1180 1 25-3/162"S 4-1/4 x 4-1/4 .032"S 25 5.21Black 24 1830 2 25-3/1662"S 4-1/4 x 4-1/4 .032"S 25 5.21Black 24 1900 2 25-3/16102"S 4-1/4 x 4-1/4 .032"S 25 5.21Black 24 1330 1 15-3/162"S 4-1/4 x 4-1/4 .032"S 32 10Black 14 1380 1 21-3/162"S 4-1/4 x 4-1/4 .032"S 32 7.88Black 20 2010 2 21-3/1662"S 4-1/4 x 4-1/4 .032"S 32 7.88Black 20 1420 1 25-3/162"S 4-1/4 x 4-1/4 .032"S 32 5.21Black 24 2070 2 25-3/1662"S 4-1/4 x 4-1/4 .032"S 32 5.21Black 24 2150 2 25-3/16102"S 4-1/4 x 4-1/4 .032"S 32 5.21Black 24

Inclined Outlet - (JVK-S) Louvered 950 1 8-5/163/4"C 2-1/2 x 2-3/4 .011"A 56.5 10None 8 1050 1 11-5/161"C 2-1/2 x 2-3/4 .011"A 55 10None 11 1220 1 11-5/161"C 5 x 2-3/4 .020"A 50 10None 11

Inclined Outlet - (LCS 10) Louvered 1170 1 12-3/43/4"C 3-3/4 x 2-3/4 .011"A 50 10None 10-1/4 1210 1 12-3/41"C 5 x 2-3/4 .020"A 50 10None 10-1/4 1230 1 12-3/41-1/4"C 5 x 2-3/4 .020"A 50 10None 10-1/4 910 1 12-3/41"S 5 x 2-3/4 .024"S 40 10Black 10-1/4

Round Outlet - (JVA-RD) Louvered 1430 1 16-7/81"C 3-1/4 x 3-1/4 .020"A 50 6.37None 14

Top Outlet - (Classic) 1270 1 17-29/321"C 3-1/4 x 3-1/4 .020"A 50 0None 14 1760 1 17-29/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 14 1920 1 23-29/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 20 2370 2 23-29/3261-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 20 2050 1 27-29/321-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 24 2500 2 27-29/3261-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 24 2630 2 27-29/32101-1/4"C 3-5/8 x 4-1/4 .020"A 50 0None 24 1870 1 17-29/321-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 14 2050 1 23-29/321-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 20 2460 2 23-29/3261-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 20 2210 1 27-29/321-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 24 2650 2 27-29/3261-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 24 2780 2 27-29/32101-1/4"C 4-1/4 x 4-1/4 .020"A 50 0None 24

Top Outlet - (JVA-T) Louvered 1220 1 17-15/161"C 3-1/4 x 3-1/4 .020"A 50 0None 14

Top Outlet - (JVB-E) Louvered 1480 1 16-1/81"C 4-1/4 x 4-1/4 .020"A 40 0None 12-1/8 2010 2 16-1/861"C 4-1/4 x 4-1/4 .020"A 40 0None 12-1/8

Top Outlet - (JVB-T) Louvered 1270 1 23-15/161-1/4"C 3-5/8 x 4-1/4 .020"A 32 0None 20 1990 2 23-15/1661-1/4"C 3-5/8 x 4-1/4 .020"A 32 0None 20 1310 1 27-15/161-1/4"C 3-5/8 x 4-1/4 .020"A 32 0None 24 2060 2 27-15/1661-1/4"C 3-5/8 x 4-1/4 .020"A 32 0None 24 1150 1 17-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 14 1200 1 23-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 20 1940 2 23-15/1661-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 20 1230 1 27-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 24 1990 2 27-15/1661-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 24 2080 2 27-15/16101-1/4"S 4-1/4 x 4-1/4 .032"S 32 0Black 24 1410 1 17-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 14 1490 1 23-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 20 2190 2 23-15/1661-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 20 1550 1 27-15/161-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 24 2260 2 27-15/1661-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 24 2410 2 27-15/16101-1/4"S 4-1/4 x 4-1/4 .032"S 40 0Black 24 1080 1 17-15/162"S 4-1/4 x 4-1/4 .032"S 25 0Black 14 1120 1 23-15/162"S 4-1/4 x 4-1/4 .032"S 25 0Black 20 1790 2 23-15/1662"S 4-1/4 x 4-1/4 .032"S 25 0Black 20 1140 1 27-15/162"S 4-1/4 x 4-1/4 .032"S 25 0Black 24

1820 2 27-15/1662"S 4-1/4 x 4-1/4 .032"S 25 0Black 24 1920 2 27-15/16102"S 4-1/4 x 4-1/4 .032"S 25 0Black 24 1260 1 17-15/162"S 4-1/4 x 4-1/4 .032"S 32 0Black 14 1310 1 23-15/162"S 4-1/4 x 4-1/4 .032"S 32 0Black 20 1980 2 23-15/1662"S 4-1/4 x 4-1/4 .032"S 32 0Black 20 1340 1 27-15/162"S 4-1/4 x 4-1/4 .032"S 32 0Black 24 2020 2 27-15/1662"S 4-1/4 x 4-1/4 .032"S 32 0Black 24 2170 2 27-15/16102"S 4-1/4 x 4-1/4 .032"S 32 0Black 24

Top Outlet - (JVK-T) Louvered 940 1 12-15/161"C 2-1/2 x 2-3/4 .011"A 55 0None 11

TRANE PRODUCTS


11SInclined Outlet - (LCS10) Louvered

1170 1 12-3/43/4"C 3-3/4 x 2-3/4 .011"A 50 10None 10-1/4 1210 1 12-3/41"C 5 x 2-3/4 .020"A 50 10None 10-1/4 1230 1 12-3/41-1/4"C 5 x 2-3/4 .020"A 50 10None 10-1/4 910 1 12-3/41"S 5 x 2-3/4 .024"S 40 10Black 10-1/4

ARCHITECTURAL WALL FINBare Element

1110 1 8-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2000 2 145-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2090 2 189-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2820 3 27-1/29-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 5.50None 1150 1 8-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 1950 2 145-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 2090 2 189-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 2790 3 27-1/29-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 5.50None 1170 1 8-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 1920 2 145-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 2090 2 189-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 2750 3 27-1/29-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 5.50None 1110 1 8-1/21"C 3-1/4 x 3-1/4 .0135"A 40 15None 2000 2 145-1/21"C 3-1/4 x 3-1/4 .0135"A 40 15None 2090 2 189-1/21"C 3-1/4 x 3-1/4 .0135"A 40 15None 2820 3 27-1/29-1/21"C 3-1/4 x 3-1/4 .0135"A 40 5.50None 1140 1 8-1/21"C 3-1/4 x 3-1/4 .0135"A 50 15None 1920 2 145-1/21"C 3-1/4 x 3-1/4 .0135"A 50 15None 2070 2 189-1/21"C 3-1/4 x 3-1/4 .0135"A 50 15None 2760 3 27-1/29-1/21"C 3-1/4 x 3-1/4 .0135"A 50 5.50None 1150 1 8-1/21"C 3-1/4 x 3-1/4 .0135"A 58 15None 1890 2 145-1/21"C 3-1/4 x 3-1/4 .0135"A 58 15None 2050 2 189-1/21"C 3-1/4 x 3-1/4 .0135"A 58 15None 2700 3 27-1/29-1/21"C 3-1/4 x 3-1/4 .0135"A 58 5.50None 1120 1 8-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2010 2 145-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2100 2 189-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 2820 3 27-1/29-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 5.50None 1140 1 8-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 1910 2 145-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 2060 2 189-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 2720 3 27-1/29-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 5.50None 1150 1 8-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 1870 2 145-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 2040 2 189-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 2680 3 27-1/29-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 5.50None 1640 1 8-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 15None 2940 2 145-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 15None 3070 2 189-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 15None 4140 3 27-1/29-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 5.50None 1720 1 8-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 15None 2880 2 145-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 15None 3050 2 189-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 15None 4020 3 27-1/29-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 5.50None 1780 1 8-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 15None 2830 2 145-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 15None 3030 2 189-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 15None 3930 3 27-1/29-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 5.50None 1430 1 91-1/4"S 2-1/2 x 5-3/16 .027"S 52 15Black 2060 2 1341-1/4"S 2-1/2 x 5-3/16 .027"S 52 15Black 2370 2 1781-1/4"S 2-1/2 x 5-3/16 .027"S 52 15Black 3180 3 2381-1/4"S 2-1/2 x 5-3/16 .027"S 52 10Black

Front Outlet - (F) Louvered 1170 1 12-3/43/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 10 1240 1 16-3/43/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 14

JAN 2010 - 71

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

TRANE PRODUCTS

ARCHITECTURAL WALL FINFront Outlet - (F) Louvered

1280 1 20-3/43/4"C 3-1/4 x 3-1/4 .0135"A 40 12.30None 18 1190 1 12-3/43/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 10 1330 1 16-3/43/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 14 1410 1 20-3/43/4"C 3-1/4 x 3-1/4 .0135"A 50 12.30None 18 1200 1 12-3/43/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 10 1400 1 16-3/43/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 14 1520 1 20-3/43/4"C 3-1/4 x 3-1/4 .0135"A 58 12.30None 18 1180 1 12-3/41"C 3-1/4 x 3-1/4 .0135"A 40 15None 10 1250 1 16-3/41"C 3-1/4 x 3-1/4 .0135"A 40 15None 14 1310 1 20-3/41"C 3-1/4 x 3-1/4 .0135"A 40 12.30None 18 1180 1 12-3/41"C 3-1/4 x 3-1/4 .0135"A 50 15None 10 1330 1 16-3/41"C 3-1/4 x 3-1/4 .0135"A 50 15None 14 1450 1 20-3/41"C 3-1/4 x 3-1/4 .0135"A 50 12.30None 18 1180 1 12-3/41"C 3-1/4 x 3-1/4 .0135"A 58 15None 10 1390 1 16-3/41"C 3-1/4 x 3-1/4 .0135"A 58 15None 14 1560 1 20-3/41"C 3-1/4 x 3-1/4 .0135"A 58 12.30None 18 1190 1 12-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 10 1270 1 16-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 40 15None 14 1320 1 20-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 40 12.30None 18 1180 1 12-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 10 1340 1 16-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 50 15None 14 1460 1 20-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 50 12.30None 18 1170 1 12-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 10 1390 1 16-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 58 15None 14 1570 1 20-3/41-1/4"C 3-1/4 x 3-1/4 .0135"A 58 12.30None 18 1710 1 14-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 15None 12 1790 1 18-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 14.20None 16 1840 1 22-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 10.20None 20 1800 1 14-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 15None 12 1960 1 18-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 14.20None 16 2070 1 22-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 10.20None 20 1870 1 14-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 15None 12 2100 1 18-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 14.20None 16 2260 1 22-13/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 10.20None 20 1370 1 14-13/161-1/4"S 2-1/2 x 5-3/16 .027"S 52 15Black 12 1510 1 18-13/161-1/4"S 2-1/2 x 5-3/16 .027"S 52 13.30Black 16 2060 2 18-13/1641-1/4"S 2-1/2 x 5-3/16 .027"S 52 13.30Black 16 1640 1 22-13/161-1/4"S 2-1/2 x 5-3/16 .027"S 52 10.30Black 20 2220 2 22-13/1641-1/4"S 2-1/2 x 5-3/16 .027"S 52 10.30Black 20 2380 2 22-13/1681-1/4"S 2-1/2 x 5-3/16 .027"S 52 10.30Black 20

Inclined Outlet - (S) Louvered 1090 1 12-1/83/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 10 1140 1 16-1/83/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1610 2 16-1/85-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1150 1 20-1/83/4"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18 1830 2 20-1/89-1/23/4"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18 1230 1 12-1/83/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 10 1330 1 16-1/83/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1680 2 16-1/85-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1410 1 20-1/83/4"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1950 2 20-1/89-1/23/4"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1270 1 12-1/83/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 10 1410 1 16-1/83/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1730 2 16-1/85-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1550 1 20-1/83/4"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 2050 2 20-1/89-1/23/4"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 1180 1 12-1/81"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 10 1230 1 16-1/81"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1610 2 16-1/85-1/21"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1270 1 20-1/81"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18 1840 2 20-1/89-1/21"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18 1220 1 12-1/81"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 10 1340 1 16-1/81"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1650 2 16-1/85-1/21"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1440 1 20-1/81"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1920 2 20-1/89-1/21"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1260 1 12-1/81"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 10 1430 1 16-1/81"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1680 2 16-1/85-1/21"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1570 1 20-1/81"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 1990 2 20-1/89-1/21"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 1190 1 12-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 10 1250 1 16-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1600 2 16-1/85-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 7.50None 14 1290 1 20-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18 1830 2 20-1/89-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 40 6.40None 18

1220 1 12-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 10 1350 1 16-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1620 2 16-1/85-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 7.50None 14 1460 1 20-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1880 2 20-1/89-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 50 6.40None 18 1250 1 12-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 10 1430 1 16-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1630 2 16-1/85-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 7.50None 14 1590 1 20-1/81-1/4"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 1920 2 20-1/89-1/21-1/4"C 3-1/4 x 3-1/4 .0135"A 58 6.40None 18 1710 1 13-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 40 7.50None 12 1790 1 17-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 40 7.50None 16 2490 2 17-1/45-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 7.50None 16 1850 1 21-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 40 5.90None 20 2750 2 21-1/49-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 40 5.90None 20 1950 1 13-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 50 7.50None 12 2110 1 17-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 50 7.50None 16 2690 2 17-1/45-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 7.50None 16 2250 1 21-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 50 5.90None 20 3050 2 21-1/49-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 50 5.90None 20 1990 1 13-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 58 7.50None 12 2230 1 17-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 58 7.50None 16 2670 2 17-1/45-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 7.50None 16 2410 1 21-1/41-1/4"C 3-1/4 x 5-1/4 .0135"A 58 5.90None 20 3080 2 21-1/49-1/21-1/4"C 3-1/4 x 5-1/4 .0135"A 58 5.90None 20 1530 1 15-7/321-1/4"S 2-1/2 x 5-3/16 .027"S 52 7.50Black 12 1650 1 18-7/321-1/4"S 2-1/2 x 5-3/16 .027"S 52 7.40Black 16 2200 2 18-7/3241-1/4"S 2-1/2 x 5-3/16 .027"S 52 7.40Black 16 1740 1 21-7/321-1/4"S 2-1/2 x 5-3/16 .027"S 52 5.90Black 20 2380 2 21-7/3241-1/4"S 2-1/2 x 5-3/16 .027"S 52 5.90Black 20 2460 2 21-7/3281-1/4"S 2-1/2 x 5-3/16 .027"S 52 5.90Black 20

Louvered - (Type E) Louvered 1170 1 9-7/81-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 3-7/8

Top Outlet - (T) Louvered 1060 1 13-9/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1100 1 17-9/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1150 1 21-9/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 18 1160 1 13-9/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1250 1 17-9/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1330 1 21-9/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1230 1 13-9/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1340 1 17-9/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1460 1 21-9/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1070 1 13-9/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1110 1 17-9/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1160 1 21-9/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 18 1170 1 13-9/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1260 1 17-9/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1350 1 21-9/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1230 1 13-9/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1350 1 17-9/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1470 1 21-9/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1080 1 13-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1120 1 17-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1170 1 21-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 18 1180 1 13-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1270 1 17-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1360 1 21-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1230 1 13-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1360 1 17-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1480 1 21-9/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1670 1 15-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 12 1710 1 19-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 16 1780 1 23-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 20 1880 1 15-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 12 1970 1 19-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 16 2080 1 23-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 20 1920 1 15-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 12 2050 1 19-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 16 2180 1 23-9/161-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 20 1310 1 17-5/81-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 12 1360 1 20-5/81-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 16 1890 2 20-5/841-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 16 1400 1 23-5/81-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20 2010 2 23-5/841-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20 2090 2 23-5/881-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20

Top Outlet - (TA) 1120 1 13-1/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1160 1 17-1/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1210 1 21-1/163/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 18

JAN 2010 - 72

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

TRANE PRODUCTS

ARCHITECTURAL WALL FINTop Outlet - (TA)

1210 1 13-1/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1300 1 17-1/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1400 1 21-1/163/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1280 1 13-1/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1420 1 17-1/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1550 1 21-1/163/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1130 1 13-1/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1180 1 17-1/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1240 1 21-1/161"C 3-1/4 x 3-1/4 .0135"A 40 0None 18 1210 1 13-1/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1320 1 17-1/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1420 1 21-1/161"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1280 1 13-1/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1430 1 17-1/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1570 1 21-1/161"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1140 1 13-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 10 1200 1 17-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 14 1260 1 21-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 40 0None 18 1220 1 13-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 10 1330 1 17-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 14 1440 1 21-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 50 0None 18 1280 1 13-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 10 1440 1 17-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 14 1590 1 21-1/161-1/4"C 3-1/4 x 3-1/4 .0135"A 58 0None 18 1750 1 151-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 12 1810 1 191-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 16 1890 1 231-1/4"C 3-1/4 x 5-1/4 .0135"A 40 0None 20 1980 1 151-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 12 2100 1 191-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 16 2230 1 231-1/4"C 3-1/4 x 5-1/4 .0135"A 50 0None 20 2110 1 151-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 12 2280 1 191-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 16 2440 1 231-1/4"C 3-1/4 x 5-1/4 .0135"A 58 0None 20 1560 1 17-1/41-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 12 1610 1 20-1/41-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 16 2250 2 20-1/441-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 16 1660 1 23-1/41-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20 2400 2 23-1/441-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20 2490 2 23-1/481-1/4"S 2-1/2 x 5-3/16 .027"S 52 0Black 20

VULCAN RADIATORDIVISION OF MESTEK, INC.

I=B=R Steam Ratings in btuh/ft of active length at 215F steam, 65F air. Ratings approved for use with hot water (Table I). Bare element ratings approved on 3-1/4" and 4-1/4" fins for flat top cover (Table I) and .964 expanded metal cover factor (Table K).

Bare Element 820 1 7-3/43/4"C 2-3/4 x 3 .016"A 33 15None 920 1 7-3/43/4"C 2-3/4 x 3 .016"A 40 15None 1040 1 7-3/43/4"C 2-3/4 x 3 .016"A 48 15None 1190 1 7-3/43/4"C 2-3/4 x 4-1/4 .020"A 33 15None 1350 1 7-3/43/4"C 2-3/4 x 4-1/4 .020"A 40 15None 1520 1 7-3/43/4"C 2-3/4 x 4-1/4 .020"A 48 15None 1470 1 7-3/43/4"C 2-3/4 x 4-1/4 .020"A 60 15None 1050 1 93/4"C 3-1/4 x 3-1/4 .020"A 33 15None 1150 1 93/4"C 3-1/4 x 3-1/4 .020"A 40 15None 1270 1 93/4"C 3-1/4 x 3-1/4 .020"A 48 15None 1220 1 93/4"C 3-1/4 x 3-1/4 .016"A 60 15None 1460 1 103/4"C 4-1/4 x 4-1/4 .020"A 33 15None 1600 1 103/4"C 4-1/4 x 4-1/4 .020"A 40 15None 1760 1 103/4"C 4-1/4 x 4-1/4 .020"A 48 15None 820 1 7-3/41"C 2-3/4 x 3 .016"A 33 15None 920 1 7-3/41"C 2-3/4 x 3 .016"A 40 15None 1020 1 7-3/41"C 2-3/4 x 3 .016"A 48 15None 1170 1 7-3/41"C 2-3/4 x 4-1/4 .020"A 33 15None 1310 1 7-3/41"C 2-3/4 x 4-1/4 .020"A 40 15None 1480 1 7-3/41"C 2-3/4 x 4-1/4 .020"A 48 15None 1050 1 91"C 3-1/4 x 3-1/4 .020"A 33 15None 1150 1 91"C 3-1/4 x 3-1/4 .020"A 40 15None 1240 1 91"C 3-1/4 x 3-1/4 .020"A 48 15None 1410 1 101"C 4-1/4 x 4-1/4 .020"A 33 15None 1600 1 101"C 4-1/4 x 4-1/4 .020"A 40 15None 1720 1 101"C 4-1/4 x 4-1/4 .020"A 48 15None 820 1 7-3/41-1/4"C 2-3/4 x 3 .016"A 33 15None 910 1 7-3/41-1/4"C 2-3/4 x 3 .016"A 40 15None

1010 1 7-3/41-1/4"C 2-3/4 x 3 .016"A 48 15None 1140 1 7-3/41-1/4"C 2-3/4 x 4-1/4 .020"A 33 15None 1280 1 7-3/41-1/4"C 2-3/4 x 4-1/4 .020"A 40 15None 1440 1 7-3/41-1/4"C 2-3/4 x 4-1/4 .020"A 48 15None 1050 1 91-1/4"C 3-1/4 x 3-1/4 .020"A 33 15None 1940 2 1561-1/4"C 3-1/4 x 3-1/4 .020"A 33 15None 2590 3 2161-1/4"C 3-1/4 x 3-1/4 .020"A 33 12None 1140 1 91-1/4"C 3-1/4 x 3-1/4 .020"A 40 15None 1980 2 1561-1/4"C 3-1/4 x 3-1/4 .020"A 40 15None 2690 3 2161-1/4"C 3-1/4 x 3-1/4 .020"A 40 12None 1210 1 91-1/4"C 3-1/4 x 3-1/4 .020"A 48 15None 1990 2 1561-1/4"C 3-1/4 x 3-1/4 .020"A 48 15None 1140 1 91-1/4"C 3-1/4 x 3-1/4 .020"A 60 15None 1160 1 91-1/4"C 3-1/4 x 3-1/4 .016"A 60 15None 2030 2 1561-1/4"C 3-1/4 x 3-1/4 .016"A 60 15None 1450 1 101-1/4"C 4-1/4 x 4-1/4 .020"A 33 15None 2600 2 1661-1/4"C 4-1/4 x 4-1/4 .020"A 33 15None 3550 3 2261-1/4"C 4-1/4 x 4-1/4 .020"A 33 11None 1600 1 101-1/4"C 4-1/4 x 4-1/4 .020"A 40 15None 2760 2 1661-1/4"C 4-1/4 x 4-1/4 .020"A 40 15None 3590 3 2261-1/4"C 4-1/4 x 4-1/4 .020"A 40 11None 1700 1 101-1/4"C 4-1/4 x 4-1/4 .020"A 48 15None 2810 2 1661-1/4"C 4-1/4 x 4-1/4 .020"A 48 15None 1570 1 101-1/4"C 4-1/4 x 4-1/4 .020"A 60 15None 1590 1 101-1/4"C 4-1/4 x 4-1/4 .016"A 60 15None 1020 1 7-3/41"S 2-3/4 x 3-3/4 .026"S 40 15Black 940 1 91-1/4"S 3-1/4 x 3-1/4 .032"S 33 15Black 1000 1 91-1/4"S 3-1/4 x 3-1/4 .032"S 40 15Black 1070 1 91-1/4"S 3-1/4 x 3-1/4 .032"S 48 15Black 1320 1 101-1/4"S 4-1/4 x 4-1/4 .032"S 33 15Black 1270 1 101-1/4"S 4-1/4 x 4-1/4 .026"S 33 15Black 2350 2 1661-1/4"S 4-1/4 x 4-1/4 .032"S 33 15Black 2290 2 1661-1/4"S 4-1/4 x 4-1/4 .026"S 33 15Black 3010 3 2261-1/4"S 4-1/4 x 4-1/4 .026"S 33 11Black 3150 3 2261-1/4"S 4-1/4 x 4-1/4 .032"S 33 11Black 1450 1 101-1/4"S 4-1/4 x 4-1/4 .032"S 40 15Black 1360 1 101-1/4"S 4-1/4 x 4-1/4 .026"S 40 15Black 2500 2 1661-1/4"S 4-1/4 x 4-1/4 .026"S 40 15Black 2540 2 1661-1/4"S 4-1/4 x 4-1/4 .032"S 40 15Black 3270 3 2261-1/4"S 4-1/4 x 4-1/4 .032"S 40 11Black 3160 3 2261-1/4"S 4-1/4 x 4-1/4 .026"S 40 11Black 1470 1 101-1/4"S 4-1/4 x 4-1/4 .032"S 48 15Black 1060 1 102"S 4-1/4 x 4-1/4 .026"S 24 15Black 1160 1 102"S 4-1/4 x 4-1/4 .032"S 24 15Black 2090 2 1662"S 4-1/4 x 4-1/4 .032"S 24 15Black 1990 2 1662"S 4-1/4 x 4-1/4 .026"S 24 15Black 2610 3 2262"S 4-1/4 x 4-1/4 .026"S 24 11Black 2820 3 2262"S 4-1/4 x 4-1/4 .032"S 24 11Black 1300 1 102"S 4-1/4 x 4-1/4 .026"S 33 15Black 1320 1 102"S 4-1/4 x 4-1/4 .032"S 33 15Black 2250 2 1662"S 4-1/4 x 4-1/4 .026"S 33 15Black 2270 2 1662"S 4-1/4 x 4-1/4 .032"S 33 15Black 2930 3 2262"S 4-1/4 x 4-1/4 .026"S 33 11Black 2960 3 2262"S 4-1/4 x 4-1/4 .032"S 33 11Black

DF-LINOVECTORFront Outlet - Louvered

1380 1 14-7/81"C 3-1/4 x 3-1/4 .016"A 60 15None 12 1650 1 20-7/81"C 3-1/4 x 3-1/4 .016"A 60 12.10None 18 1730 1 26-7/81"C 3-1/4 x 3-1/4 .016"A 60 6.10None 24 2280 2 26-7/8121"C 3-1/4 x 3-1/4 .016"A 60 6.10None 24 1210 1 14-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 40 15None 12 1370 1 20-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 40 12.10None 18 2000 2 20-7/861-1/4"C 3-1/4 x 3-1/4 .020"A 40 12.10None 18 1420 1 26-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 24 2080 2 26-7/861-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 24 2130 2 26-7/8121-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 24 2380 3 26-7/861-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 24 1390 1 14-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 48 15None 12 1530 1 20-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 48 12.10None 18 1570 1 26-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 48 6.10None 24 2280 2 26-7/8121-1/4"C 3-1/4 x 3-1/4 .020"A 48 6.10None 24 1290 1 14-7/81-1/4"C 3-1/4 x 3-1/4 .016"A 60 15None 12 1530 1 20-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 60 12.10None 18 1670 1 26-7/81-1/4"C 3-1/4 x 3-1/4 .020"A 60 6.10None 24 1700 1 14-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 40 15None 12 1830 1 20-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 40 12.10None 18 2580 2 20-7/861-1/4"C 4-1/4 x 4-1/4 .020"A 40 12.10None 18 1890 1 26-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 40 6.10None 24 2700 2 26-7/861-1/4"C 4-1/4 x 4-1/4 .020"A 40 6.10None 24 2840 2 26-7/8121-1/4"C 4-1/4 x 4-1/4 .020"A 40 6.10None 24

JAN 2010 - 73

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material

VULCAN RADIATORDIVISION OF MESTEK, INC.

DF-LINOVECTORFront Outlet - Louvered

2980 3 26-7/861-1/4"C 4-1/4 x 4-1/4 .020"A 40 6.10None 24 1750 1 14-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 48 15None 12 2060 1 20-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 48 12.10None 18 2520 2 20-7/861-1/4"C 4-1/4 x 4-1/4 .020"A 48 12.10None 18 2140 1 26-7/81-1/4"C 4-1/4 x 4-1/4 .020"A 48 6.10None 24 2720 2 26-7/861-1/4"C 4-1/4 x 4-1/4 .020"A 48 6.10None 24 2880 2 26-7/8121-1/4"C 4-1/4 x 4-1/4 .020"A 48 6.10None 24 1670 1 14-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 60 15None 12 2000 1 20-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 60 12.10None 18 2150 1 26-7/81-1/4"C 4-1/4 x 4-1/4 .016"A 60 6.10None 24 1370 1 14-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 33 15Black 12 1430 1 20-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 33 12.10Black 18 2220 2 20-7/861-1/4"S 4-1/4 x 4-1/4 .032"S 33 12.10Black 18 1460 1 26-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 33 6.10Black 24 2260 2 26-7/861-1/4"S 4-1/4 x 4-1/4 .032"S 33 6.10Black 24 2360 2 26-7/8121-1/4"S 4-1/4 x 4-1/4 .032"S 33 6.10Black 24 2630 3 26-7/861-1/4"S 4-1/4 x 4-1/4 .032"S 33 6.10Black 24 1540 1 14-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 15Black 12 1670 1 20-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 12.10Black 18 1710 1 26-7/81-1/4"S 4-1/4 x 4-1/4 .032"S 40 6.10Black 24 2550 2 26-7/8121-1/4"S 4-1/4 x 4-1/4 .032"S 40 6.10Black 24

DR-LINOVECTORRound Outlet - Louvered

1450 1 151"C 3-1/4 x 3-1/4 .016"A 60 7.70None 12 1620 1 211"C 3-1/4 x 3-1/4 .016"A 60 6.10None 18 1730 1 271"C 3-1/4 x 3-1/4 .016"A 60 3.10None 24 2280 2 27121"C 3-1/4 x 3-1/4 .016"A 60 3.10None 24 1210 1 151-1/4"C 3-1/4 x 3-1/4 .020"A 40 7.70None 12 1330 1 211-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 18 1900 2 2161-1/4"C 3-1/4 x 3-1/4 .020"A 40 6.10None 18 1380 1 271-1/4"C 3-1/4 x 3-1/4 .020"A 40 3.10None 24 1980 2 2761-1/4"C 3-1/4 x 3-1/4 .020"A 40 3.10None 24 2050 2 27121-1/4"C 3-1/4 x 3-1/4 .020"A 40 3.10None 24 2280 3 2761-1/4"C 3-1/4 x 3-1/4 .020"A 40 3.10None 24 1360 1 151-1/4"C 3-1/4 x 3-1/4 .020"A 48 7.70None 12 1480 1 211-1/4"C 3-1/4 x 3-1/4 .020"A 48 6.10None 18 1510 1 271-1/4"C 3-1/4 x 3-1/4 .020"A 48 3.10None 24 2280 2 27121-1/4"C 3-1/4 x 3-1/4 .020"A 48 3.10None 24 1320 1 151-1/4"C 3-1/4 x 3-1/4 .016"A 60 7.70None 12 1440 1 211-1/4"C 3-1/4 x 3-1/4 .016"A 60 6.10None 18 1570 1 271-1/4"C 3-1/4 x 3-1/4 .016"A 60 3.10None 24 1710 1 14-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 6.70None 12 1860 1 20-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.40None 18 2570 2 20-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.40None 18 1890 1 26-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 2.80None 24 2810 2 26-3/4121-1/4"C 4-1/4 x 4-1/4 .020"A 40 2.80None 24 2700 2 26-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 2.80None 24 3030 3 26-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 2.80None 24 1920 1 14-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 6.70None 12 2120 1 20-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 5.40None 18 2710 2 20-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 48 5.40None 18 2240 1 26-3/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 2.80None 24 3040 2 26-3/4121-1/4"C 4-1/4 x 4-1/4 .020"A 48 2.80None 24 2900 2 26-3/461-1/4"C 4-1/4 x 4-1/4 .020"A 48 2.80None 24 1830 1 14-3/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 6.70None 12 2130 1 20-3/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 5.40None 18 2330 1 26-3/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 2.80None 24 1370 1 14-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 6.70Black 12 1440 1 20-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.40Black 18 2260 2 20-3/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.40Black 18 1480 1 26-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 2.80Black 24 2400 2 26-3/4121-1/4"S 4-1/4 x 4-1/4 .032"S 33 2.80Black 24 2350 2 26-3/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 2.80Black 24 2750 3 26-3/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 2.80Black 24 1560 1 14-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 6.70Black 12 1640 1 20-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.40Black 18 1690 1 26-3/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 2.80Black 24 2560 2 26-3/4121-1/4"S 4-1/4 x 4-1/4 .032"S 40 2.80Black 24

DS-LINOVECTORInclined Outlet - Louvered

1380 1 13-1/41"C 3-1/4 x 3-1/4 .016"A 60 10None 12 1660 1 19-1/41"C 3-1/4 x 3-1/4 .016"A 60 9.17None 18

1740 1 25-1/41"C 3-1/4 x 3-1/4 .016"A 60 5.17None 24 2320 2 25-1/4121"C 3-1/4 x 3-1/4 .016"A 60 5.17None 24 1230 1 13-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 40 10None 12 1330 1 19-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 40 9.17None 18 2030 2 19-1/461-1/4"C 3-1/4 x 3-1/4 .020"A 40 9.17None 18 1400 1 25-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 40 5.17None 24 2160 2 25-1/4121-1/4"C 3-1/4 x 3-1/4 .020"A 40 5.17None 24 2110 2 25-1/461-1/4"C 3-1/4 x 3-1/4 .020"A 40 5.17None 24 2400 3 25-1/461-1/4"C 3-1/4 x 3-1/4 .020"A 40 5.17None 24 1390 1 13-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 48 10None 12 1580 1 19-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 48 9.17None 18 1630 1 25-1/41-1/4"C 3-1/4 x 3-1/4 .020"A 48 5.17None 24 2410 2 25-1/4121-1/4"C 3-1/4 x 3-1/4 .020"A 48 5.17None 24 1340 1 13-1/41-1/4"C 3-1/4 x 3-1/4 .016"A 60 10None 12 1630 1 19-1/41-1/4"C 3-1/4 x 3-1/4 .016"A 60 9.17None 18 1760 1 25-1/41-1/4"C 3-1/4 x 3-1/4 .016"A 60 5.17None 24 1710 1 13-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 10None 12 1860 1 19-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 9.17None 18 2520 2 19-1/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 9.17None 18 1900 1 25-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.17None 24 2640 2 25-1/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.17None 24 2750 2 25-1/4121-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.17None 24 3020 3 25-1/461-1/4"C 4-1/4 x 4-1/4 .020"A 40 5.17None 24 1790 1 13-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 10None 12 2070 1 19-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 9.17None 18 2530 2 19-1/461-1/4"C 4-1/4 x 4-1/4 .020"A 48 9.17None 18 2170 1 25-1/41-1/4"C 4-1/4 x 4-1/4 .020"A 48 5.17None 24 2720 2 25-1/461-1/4"C 4-1/4 x 4-1/4 .020"A 48 5.17None 24 2870 2 25-1/4121-1/4"C 4-1/4 x 4-1/4 .020"A 48 5.17None 24 1670 1 13-1/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 10None 12 1970 1 19-1/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 9.17None 18 2110 1 25-1/41-1/4"C 4-1/4 x 4-1/4 .016"A 60 5.17None 24 1280 1 13-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 10Black 12 1360 1 19-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 9.17Black 18 2010 2 19-1/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 9.17Black 18 1380 1 25-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.17Black 24 2070 2 25-1/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.17Black 24 2170 2 25-1/4121-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.17Black 24 2550 3 25-1/461-1/4"S 4-1/4 x 4-1/4 .032"S 33 5.17Black 24 1510 1 13-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 10Black 12 1660 1 19-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 9.17Black 18 1690 1 25-1/41-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.17Black 24 2540 2 25-1/4121-1/4"S 4-1/4 x 4-1/4 .032"S 40 5.17Black 24

DT-LINOVECTORTop Outlet - Louvered

1330 1 161"C 3-1/4 x 3-1/4 .016"A 60 0None 12 1500 1 221"C 3-1/4 x 3-1/4 .016"A 60 0None 18 1600 1 281"C 3-1/4 x 3-1/4 .016"A 60 0None 24 2190 2 28121"C 3-1/4 x 3-1/4 .016"A 60 0None 24 1090 1 161-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 12 1140 1 221-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 18 1690 2 2261-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 18 1210 1 281-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 24 1850 2 28121-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 24 1760 2 2861-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 24 2090 3 2861-1/4"C 3-1/4 x 3-1/4 .020"A 40 0None 24 1270 1 161-1/4"C 3-1/4 x 3-1/4 .020"A 48 0None 12 1340 1 221-1/4"C 3-1/4 x 3-1/4 .020"A 48 0None 18 1450 1 281-1/4"C 3-1/4 x 3-1/4 .020"A 48 0None 24 2130 2 28121-1/4"C 3-1/4 x 3-1/4 .020"A 48 0None 24 1240 1 161-1/4"C 3-1/4 x 3-1/4 .016"A 60 0None 12 1370 1 221-1/4"C 3-1/4 x 3-1/4 .016"A 60 0None 18 1500 1 281-1/4"C 3-1/4 x 3-1/4 .016"A 60 0None 24 1710 1 161-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 12 1850 1 221-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 18 2570 2 2261-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 18 1900 1 281-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 24 2710 2 2861-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 24 2790 2 28121-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 24 3080 3 2861-1/4"C 4-1/4 x 4-1/4 .020"A 40 0None 24 1770 1 161-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 12 1960 1 221-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 18 2590 2 2261-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 18 2090 1 281-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 24 2760 2 2861-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 24 2900 2 28121-1/4"C 4-1/4 x 4-1/4 .020"A 48 0None 24 1790 1 161-1/4"C 4-1/4 x 4-1/4 .016"A 60 0None 12 2020 1 221-1/4"C 4-1/4 x 4-1/4 .016"A 60 0None 18 2190 1 281-1/4"C 4-1/4 x 4-1/4 .016"A 60 0None 24 1220 1 161-1/4"S 4-1/4 x 4-1/4 .032"S 33 0Black 12

JAN 2010 - 74

FINNED TUBE

Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpacing

(in.)

Tiersof

Element

Finsper

FootFin

Finish

FinThickness

andMaterial

FinSize

H x W(in.)

TubeSizeand

Material Rating

HeatingEffect(%)

InstalledHeight

(in.)

ActualEncl.

Height(in.)

TierSpac

boilers baseboard radiation finned tube (commercial) radiation … · 2012. 5. 1. · boiler model...

Documents