www.atlascopco.com

Technical data

Max Max Height Sound level

wheel fi bre Max over Air consumption at free

Speed dia disc dia output Weight spindle max op free speed speed

Model r/min mm mm kW hp kg lb mm in l/s cfm l/s cfm dB(A) Ordering No. Angle grinders LSV 48 SA 120-13a 12000 125 M14 1.9 2.5 2.5 5.5 78 3.1 36 76 17 36 89 8423 0132 07LSV 48 SA 085-18a 8500 180 M14 1.9 2.5 2.7 5.9 78 3.1 36 76 17 36 83 8423 0132 06LSV 48 SA 066-23B 6600 230 5/8” 1.9 2.5 2.9 6.4 82 3.2 36 76 17 36 83 8423 0132 08Angle sanders LSV 48 SA 085b 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 02LSV 48 SA 085 M14a 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 03LSV 48 SA 066b 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 00LSV 48 SA 066 M14a 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 01

Tool-specifi c airline accessory kits, for optimal performance and maximum cost effi ciency. When you purchase an Atlas Copco power tool, you get the best that money can buy. Make sure you enjoy its full potential. Invest in one of our tool-specifi c Installation Proposals – for optimum productivity!

LSV 48 vs comp

Power 1.9 kW +30%

Weight 2.7 kg -30%

Height over spindle 78 mm -55%

Productivity +30%

BOOST POWER WITH THE RIGHT INSTALLATION

7” and 9” angle grinder

The perfect tool for heavy-duty applications where productivity is key. The low profi le angle head makes it possible to work in spaces you could never access with a vertical tool.

6600 rpm and 8500 rpm angle sander

The LSV 48 sander is a great choice for both rough and fi ne sanding applications. The angled starting handle and comfortable support handle give you excellent control. The lubrication-free motor keeps the sanded surface completely free from oil.

Kit for dust extraction in grinding and

sanding applications

A new kit is available for cutting in GRP, glass fi ber reinforced plastic.

ErgoNIP 10 10 m TURBO 16

8202 1180 46*

ErgoQIC 10

Installation Proposal for LSV 48

BALL VALVE +MIDI F/R 15 +ERGOQIC 108202 0845 48

Save 480 euro per monthOur power tools are designed to run at 6.3 bar, if the air pressure is lower then the effi ciency drops. Grinding at an air pressure that is just one bar lower leeds in many cases to 40% longer process time. If you use your grinder three hours per day and the cost for a working hour is 20 euro then the additional 1.2 hours the operator has to work due to the lower pressure costs the employer 24 euro per day. In a month this amounts to 480 euro. In other words, you can save a lot of money by using the correct air line.

Accessories

1 Depressed centre wheel Ordering No. 1 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18)2 Cut off wheel 2 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18) (Accessories included in LSV 48 SA066-23) Cut off wheel fl ange nut4 Backing pad 5/8” -11 Spindle 4 a Washer 4175 0879 80 4 b Backing pad 3780 2710 60 4 c Flange nut (5/8” -11) 4175 0893 00 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) M14 Spindle 4 b Backing pad 3780 2710 60 4 c Flange nut (M14) 4175 0893 01 (Optional accessories to LSV 48 SA085 M14, SA066 M14)5 Spiral cool 7” set (pad + fl ange nut) 5 a 5/8” thread 4170 1192 90 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) 5 a M14 thread 4170 1192 91 (Optional accessories to LSV 48 SA085 M14, SA066 M14)6 Piped away exhaust 4150 2049 90 (Optional accessories to LSV 48 SA085 Dust extraction kit for LSV 48 SA085 (8423 0132 02) Kit for depressed center wheel, dia 180 mm 3780 4093 41 Kit for fi ber disc, dia 180 mm 3781 4093 40 Kit for cutting GRP (for disc dia 180 mm) 3780 4093 42 Cutting disc, dia 180 mm (for above kit) 3781 5074 62

Air inlet thread BSP inch 1/2. a M14 spindle. b UNC 5/8”-11 spindle. c With dust extraction - for sanding with fi bre disc.

9833

152

5 01

E.C

.O R

ekla

mb

yrå

AB

. Ått

a.45

try

cker

i ab

200

8:1

1 2 4 5

4 a 5 a

1 a 2 a 4 b

4 c

6

6 a

Atlas Copco Angle GrindersLSV 48 – power, accessibility and safety

ANGLE VS VERTICAL– or how too increase productivity by 30%

This is one powerful package. The LSV 48 is 30% lighter than a conventional vertical grinder and 30% more powerful. This combi-nation (less weight and more power) translates into productivity gains of up to 30% and some real hard-cash savings. Add ergono-mic design and overspeed protection and you’ll understand why the LSV 48 provides its owners with a serious competitive edge.

1. PRODUCTIVITY UP 30%

Removes more materialBoosting productivity is key to cutting costs. Tests show that the LSV 48 provides 60% higher material removal than many vertical grinders. This means that the process time can be reduced by more than 30%. In terms of bottom-line costs, the savings are impressive: if you use the tool 2.5 hours a day, you can save EUR 300 every month.

Less downtimeBut what happens to productivity when you have to change the disc several times a day? With Atlas Copco’s spindle lock you need just one tool to replace the disc. This makes changeovers fast and easy, keeping productivity high.

3. ERGONOMICS LESS STRAIN

Kinder to your handsThe LSV 48 is designed to be easier on your hands and wrists than other tools.

Straight wristsThe handle of the LSV 48 is angled, allowing operators to work with a straight wrist. This makes it easier to transmit feed-force to the grinding disc, while reducing the risk of carpal tunnel syndrome.

Gets everywhereThe height over the spindle is just 78 mm – that’s 55% lower than a conventional vertical grinder. In other words, you’ll now be able to work in spaces that were previously out of reach. The combination of high power and low weight can boost productivity by over 30% compared to vertical grinders.

Rugged and reliableThe LSV 48 features state of the art angle gear design with super-hardened, deep-cooled, spiral bevel gears. Grease-lubricated and fully sealed, the gear provides extremely high durability and long intervals between grease changes – just once a year for single-shift usage and twice for multi-shift.

Overspeed protectionThe LSV 48 provides a high level of operator safety. Unlike many other grinders with vane motors, the LSV 48 is equipped with centrifugally-activated overspeed protection. If the free speed should exceed the nominal speed, the overspeed protection is automatically activated, eliminating the risk of wheel explosion.

Five good reasons to choose the LSV 48 angle grinder

0.016

0.014

0.012

0.01

0.008

0.006

0.004

0.002

0

Avarage removal

LSV 48 Vertical competitor

Low vibrationsWith a built-in auto-balancer, vibrations are kept below 2.5 m/s2. Due to its smooth action, the LSV 48 helps to reduce the occurrence of vibration induced white fi ngers.

2. ACCESSIBILITY 55% LOWER 4. DURABILITY 1000 hrs 5. SAFETY

SAFETY FIRST

How to make it safer

Check the free speedThe measured speed at a pressure of 6.3 bars should not exceed the rated speed of the grinder. The wheel must be removed before the grinder is checked. The checks should be carried out regularly.

Check the wheel guardAlways use the recommended wheel guard and check that it is not damaged. Never use a grinder without the wheel guard when the grinding wheel requires one.

Match the maximum speed of

the wheel to the right grinderMake sure that the stated maximumspeed of the grinder never exceeds the maximum speed of the grinding wheel.

Check the grinding wheelMake sure that the grinding wheel is not cracked or damaged in any way. The grinding wheel should have the correct hole dimensions and should be fi tted properly on the spindle to avoid unbalanced vibrations.

Check fl ange and wheelcombinations correspond to nationalregulations. Check that the fl anges are undamaged and that they are clean.

Wear– personal protection goggles– ear protection– gloves (helmet in heavier applications)

Test run your grinder in a protected area after having assembled the wheel. Keep the space around the grinding operation free from other people.

MaintenanceMake sure you follow prescribed service instructions and intervals. Do not disassemble security parts, e.g. speed governor or overspeed shut-off. These parts have to be com-pletely replaced when damaged.

1

ANGLE VS VERTICAL– or how too increase productivity by 30%

This is one powerful package. The LSV 48 is 30% lighter than a conventional vertical grinder and 30% more powerful. This combi-nation (less weight and more power) translates into productivity gains of up to 30% and some real hard-cash savings. Add ergono-mic design and overspeed protection and you’ll understand why the LSV 48 provides its owners with a serious competitive edge.

1. PRODUCTIVITY UP 30%

Removes more materialBoosting productivity is key to cutting costs. Tests show that the LSV 48 provides 60% higher material removal than many vertical grinders. This means that the process time can be reduced by more than 30%. In terms of bottom-line costs, the savings are impressive: if you use the tool 2.5 hours a day, you can save EUR 300 every month.

Less downtimeBut what happens to productivity when you have to change the disc several times a day? With Atlas Copco’s spindle lock you need just one tool to replace the disc. This makes changeovers fast and easy, keeping productivity high.

3. ERGONOMICS LESS STRAIN

Kinder to your handsThe LSV 48 is designed to be easier on your hands and wrists than other tools.

Straight wristsThe handle of the LSV 48 is angled, allowing operators to work with a straight wrist. This makes it easier to transmit feed-force to the grinding disc, while reducing the risk of carpal tunnel syndrome.

Gets everywhereThe height over the spindle is just 78 mm – that’s 55% lower than a conventional vertical grinder. In other words, you’ll now be able to work in spaces that were previously out of reach. The combination of high power and low weight can boost productivity by over 30% compared to vertical grinders.

Rugged and reliableThe LSV 48 features state of the art angle gear design with super-hardened, deep-cooled, spiral bevel gears. Grease-lubricated and fully sealed, the gear provides extremely high durability and long intervals between grease changes – just once a year for single-shift usage and twice for multi-shift.

Overspeed protectionThe LSV 48 provides a high level of operator safety. Unlike many other grinders with vane motors, the LSV 48 is equipped with centrifugally-activated overspeed protection. If the free speed should exceed the nominal speed, the overspeed protection is automatically activated, eliminating the risk of wheel explosion.

Five good reasons to choose the LSV 48 angle grinder

0.016

0.014

0.012

0.01

0.008

0.006

0.004

0.002

0

Avarage removal

LSV 48 Vertical competitor

Low vibrationsWith a built-in auto-balancer, vibrations are kept below 2.5 m/s2. Due to its smooth action, the LSV 48 helps to reduce the occurrence of vibration induced white fi ngers.

2. ACCESSIBILITY 55% LOWER 4. DURABILITY 1000 hrs 5. SAFETY

SAFETY FIRST

How to make it safer

Check the free speedThe measured speed at a pressure of 6.3 bars should not exceed the rated speed of the grinder. The wheel must be removed before the grinder is checked. The checks should be carried out regularly.

Check the wheel guardAlways use the recommended wheel guard and check that it is not damaged. Never use a grinder without the wheel guard when the grinding wheel requires one.

Match the maximum speed of

the wheel to the right grinderMake sure that the stated maximumspeed of the grinder never exceeds the maximum speed of the grinding wheel.

Check the grinding wheelMake sure that the grinding wheel is not cracked or damaged in any way. The grinding wheel should have the correct hole dimensions and should be fi tted properly on the spindle to avoid unbalanced vibrations.

Check fl ange and wheelcombinations correspond to nationalregulations. Check that the fl anges are undamaged and that they are clean.

Wear– personal protection goggles– ear protection– gloves (helmet in heavier applications)

Test run your grinder in a protected area after having assembled the wheel. Keep the space around the grinding operation free from other people.

MaintenanceMake sure you follow prescribed service instructions and intervals. Do not disassemble security parts, e.g. speed governor or overspeed shut-off. These parts have to be com-pletely replaced when damaged.

1

ANGLE VS VERTICAL– or how too increase productivity by 30%

This is one powerful package. The LSV 48 is 30% lighter than a conventional vertical grinder and 30% more powerful. This combi-nation (less weight and more power) translates into productivity gains of up to 30% and some real hard-cash savings. Add ergono-mic design and overspeed protection and you’ll understand why the LSV 48 provides its owners with a serious competitive edge.

1. PRODUCTIVITY UP 30%

Removes more materialBoosting productivity is key to cutting costs. Tests show that the LSV 48 provides 60% higher material removal than many vertical grinders. This means that the process time can be reduced by more than 30%. In terms of bottom-line costs, the savings are impressive: if you use the tool 2.5 hours a day, you can save EUR 300 every month.

Less downtimeBut what happens to productivity when you have to change the disc several times a day? With Atlas Copco’s spindle lock you need just one tool to replace the disc. This makes changeovers fast and easy, keeping productivity high.

3. ERGONOMICS LESS STRAIN

Kinder to your handsThe LSV 48 is designed to be easier on your hands and wrists than other tools.

Straight wristsThe handle of the LSV 48 is angled, allowing operators to work with a straight wrist. This makes it easier to transmit feed-force to the grinding disc, while reducing the risk of carpal tunnel syndrome.

Gets everywhereThe height over the spindle is just 78 mm – that’s 55% lower than a conventional vertical grinder. In other words, you’ll now be able to work in spaces that were previously out of reach. The combination of high power and low weight can boost productivity by over 30% compared to vertical grinders.

Rugged and reliableThe LSV 48 features state of the art angle gear design with super-hardened, deep-cooled, spiral bevel gears. Grease-lubricated and fully sealed, the gear provides extremely high durability and long intervals between grease changes – just once a year for single-shift usage and twice for multi-shift.

Overspeed protectionThe LSV 48 provides a high level of operator safety. Unlike many other grinders with vane motors, the LSV 48 is equipped with centrifugally-activated overspeed protection. If the free speed should exceed the nominal speed, the overspeed protection is automatically activated, eliminating the risk of wheel explosion.

Five good reasons to choose the LSV 48 angle grinder

0.016

0.014

0.012

0.01

0.008

0.006

0.004

0.002

0

Avarage removal

LSV 48 Vertical competitor

Low vibrationsWith a built-in auto-balancer, vibrations are kept below 2.5 m/s2. Due to its smooth action, the LSV 48 helps to reduce the occurrence of vibration induced white fi ngers.

2. ACCESSIBILITY 55% LOWER 4. DURABILITY 1000 hrs 5. SAFETY

SAFETY FIRST

How to make it safer

Check the free speedThe measured speed at a pressure of 6.3 bars should not exceed the rated speed of the grinder. The wheel must be removed before the grinder is checked. The checks should be carried out regularly.

Check the wheel guardAlways use the recommended wheel guard and check that it is not damaged. Never use a grinder without the wheel guard when the grinding wheel requires one.

Match the maximum speed of

the wheel to the right grinderMake sure that the stated maximumspeed of the grinder never exceeds the maximum speed of the grinding wheel.

Check the grinding wheelMake sure that the grinding wheel is not cracked or damaged in any way. The grinding wheel should have the correct hole dimensions and should be fi tted properly on the spindle to avoid unbalanced vibrations.

Check fl ange and wheelcombinations correspond to nationalregulations. Check that the fl anges are undamaged and that they are clean.

Wear– personal protection goggles– ear protection– gloves (helmet in heavier applications)

Test run your grinder in a protected area after having assembled the wheel. Keep the space around the grinding operation free from other people.

MaintenanceMake sure you follow prescribed service instructions and intervals. Do not disassemble security parts, e.g. speed governor or overspeed shut-off. These parts have to be com-pletely replaced when damaged.

1

ANGLE VS VERTICAL– or how too increase productivity by 30%

This is one powerful package. The LSV 48 is 30% lighter than a conventional vertical grinder and 30% more powerful. This combi-nation (less weight and more power) translates into productivity gains of up to 30% and some real hard-cash savings. Add ergono-mic design and overspeed protection and you’ll understand why the LSV 48 provides its owners with a serious competitive edge.

1. PRODUCTIVITY UP 30%

Removes more materialBoosting productivity is key to cutting costs. Tests show that the LSV 48 provides 60% higher material removal than many vertical grinders. This means that the process time can be reduced by more than 30%. In terms of bottom-line costs, the savings are impressive: if you use the tool 2.5 hours a day, you can save EUR 300 every month.

Less downtimeBut what happens to productivity when you have to change the disc several times a day? With Atlas Copco’s spindle lock you need just one tool to replace the disc. This makes changeovers fast and easy, keeping productivity high.

3. ERGONOMICS LESS STRAIN

Kinder to your handsThe LSV 48 is designed to be easier on your hands and wrists than other tools.

Straight wristsThe handle of the LSV 48 is angled, allowing operators to work with a straight wrist. This makes it easier to transmit feed-force to the grinding disc, while reducing the risk of carpal tunnel syndrome.

Gets everywhereThe height over the spindle is just 78 mm – that’s 55% lower than a conventional vertical grinder. In other words, you’ll now be able to work in spaces that were previously out of reach. The combination of high power and low weight can boost productivity by over 30% compared to vertical grinders.

Rugged and reliableThe LSV 48 features state of the art angle gear design with super-hardened, deep-cooled, spiral bevel gears. Grease-lubricated and fully sealed, the gear provides extremely high durability and long intervals between grease changes – just once a year for single-shift usage and twice for multi-shift.

Overspeed protectionThe LSV 48 provides a high level of operator safety. Unlike many other grinders with vane motors, the LSV 48 is equipped with centrifugally-activated overspeed protection. If the free speed should exceed the nominal speed, the overspeed protection is automatically activated, eliminating the risk of wheel explosion.

Five good reasons to choose the LSV 48 angle grinder

0.016

0.014

0.012

0.01

0.008

0.006

0.004

0.002

0

Avarage removal

LSV 48 Vertical competitor

Low vibrationsWith a built-in auto-balancer, vibrations are kept below 2.5 m/s2. Due to its smooth action, the LSV 48 helps to reduce the occurrence of vibration induced white fi ngers.

2. ACCESSIBILITY 55% LOWER 4. DURABILITY 1000 hrs 5. SAFETY

SAFETY FIRST

How to make it safer

Check the free speedThe measured speed at a pressure of 6.3 bars should not exceed the rated speed of the grinder. The wheel must be removed before the grinder is checked. The checks should be carried out regularly.

Check the wheel guardAlways use the recommended wheel guard and check that it is not damaged. Never use a grinder without the wheel guard when the grinding wheel requires one.

Match the maximum speed of

the wheel to the right grinderMake sure that the stated maximumspeed of the grinder never exceeds the maximum speed of the grinding wheel.

Check the grinding wheelMake sure that the grinding wheel is not cracked or damaged in any way. The grinding wheel should have the correct hole dimensions and should be fi tted properly on the spindle to avoid unbalanced vibrations.

Check fl ange and wheelcombinations correspond to nationalregulations. Check that the fl anges are undamaged and that they are clean.

Wear– personal protection goggles– ear protection– gloves (helmet in heavier applications)

Test run your grinder in a protected area after having assembled the wheel. Keep the space around the grinding operation free from other people.

MaintenanceMake sure you follow prescribed service instructions and intervals. Do not disassemble security parts, e.g. speed governor or overspeed shut-off. These parts have to be com-pletely replaced when damaged.

1

www.atlascopco.com

Technical data

Max Max Height Sound level

wheel fi bre Max over Air consumption at free

Speed dia disc dia output Weight spindle max op free speed speed

Model r/min mm mm kW hp kg lb mm in l/s cfm l/s cfm dB(A) Ordering No. Angle grinders LSV 48 SA 120-13a 12000 125 M14 1.9 2.5 2.5 5.5 78 3.1 36 76 17 36 89 8423 0132 07LSV 48 SA 085-18a 8500 180 M14 1.9 2.5 2.7 5.9 78 3.1 36 76 17 36 83 8423 0132 06LSV 48 SA 066-23B 6600 230 5/8” 1.9 2.5 2.9 6.4 82 3.2 36 76 17 36 83 8423 0132 08Angle sanders LSV 48 SA 085b 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 02LSV 48 SA 085 M14a 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 03LSV 48 SA 066b 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 00LSV 48 SA 066 M14a 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 01

Tool-specifi c airline accessory kits, for optimal performance and maximum cost effi ciency. When you purchase an Atlas Copco power tool, you get the best that money can buy. Make sure you enjoy its full potential. Invest in one of our tool-specifi c Installation Proposals – for optimum productivity!

LSV 48 vs comp

Power 1.9 kW +30%

Weight 2.7 kg -30%

Height over spindle 78 mm -55%

Productivity +30%

BOOST POWER WITH THE RIGHT INSTALLATION

7” and 9” angle grinder

The perfect tool for heavy-duty applications where productivity is key. The low profi le angle head makes it possible to work in spaces you could never access with a vertical tool.

6600 rpm and 8500 rpm angle sander

The LSV 48 sander is a great choice for both rough and fi ne sanding applications. The angled starting handle and comfortable support handle give you excellent control. The lubrication-free motor keeps the sanded surface completely free from oil.

Kit for dust extraction in grinding and

sanding applications

A new kit is available for cutting in GRP, glass fi ber reinforced plastic.

ErgoNIP 10 10 m TURBO 16

8202 1180 46*

ErgoQIC 10

Installation Proposal for LSV 48

BALL VALVE +MIDI F/R 15 +ERGOQIC 108202 0845 48

Save 480 euro per monthOur power tools are designed to run at 6.3 bar, if the air pressure is lower then the effi ciency drops. Grinding at an air pressure that is just one bar lower leeds in many cases to 40% longer process time. If you use your grinder three hours per day and the cost for a working hour is 20 euro then the additional 1.2 hours the operator has to work due to the lower pressure costs the employer 24 euro per day. In a month this amounts to 480 euro. In other words, you can save a lot of money by using the correct air line.

Accessories

1 Depressed centre wheel Ordering No. 1 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18)2 Cut off wheel 2 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18) (Accessories included in LSV 48 SA066-23) Cut off wheel fl ange nut4 Backing pad 5/8” -11 Spindle 4 a Washer 4175 0879 80 4 b Backing pad 3780 2710 60 4 c Flange nut (5/8” -11) 4175 0893 00 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) M14 Spindle 4 b Backing pad 3780 2710 60 4 c Flange nut (M14) 4175 0893 01 (Optional accessories to LSV 48 SA085 M14, SA066 M14)5 Spiral cool 7” set (pad + fl ange nut) 5 a 5/8” thread 4170 1192 90 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) 5 a M14 thread 4170 1192 91 (Optional accessories to LSV 48 SA085 M14, SA066 M14)6 Piped away exhaust 4150 2049 90 (Optional accessories to LSV 48 SA085 Dust extraction kit for LSV 48 SA085 (8423 0132 02) Kit for depressed center wheel, dia 180 mm 3780 4093 41 Kit for fi ber disc, dia 180 mm 3781 4093 40 Kit for cutting GRP (for disc dia 180 mm) 3780 4093 42 Cutting disc, dia 180 mm (for above kit) 3781 5074 62

Air inlet thread BSP inch 1/2. a M14 spindle. b UNC 5/8”-11 spindle. c With dust extraction - for sanding with fi bre disc.

9833

152

5 01

E.C

.O R

ekla

mb

yrå

AB

. Ått

a.45

try

cker

i ab

200

8:1

1 2 4 5

4 a 5 a

1 a 2 a 4 b

4 c

6

6 a

Atlas Copco Angle GrindersLSV 48 – power, accessibility and safety

www.atlascopco.com

Technical data

Max Max Height Sound level

wheel fi bre Max over Air consumption at free

Speed dia disc dia output Weight spindle max op free speed speed

Model r/min mm mm kW hp kg lb mm in l/s cfm l/s cfm dB(A) Ordering No. Angle grinders LSV 48 SA 120-13a 12000 125 M14 1.9 2.5 2.5 5.5 78 3.1 36 76 17 36 89 8423 0132 07LSV 48 SA 085-18a 8500 180 M14 1.9 2.5 2.7 5.9 78 3.1 36 76 17 36 83 8423 0132 06LSV 48 SA 066-23B 6600 230 5/8” 1.9 2.5 2.9 6.4 82 3.2 36 76 17 36 83 8423 0132 08Angle sanders LSV 48 SA 085b 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 02LSV 48 SA 085 M14a 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 03LSV 48 SA 066b 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 00LSV 48 SA 066 M14a 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 01

Tool-specifi c airline accessory kits, for optimal performance and maximum cost effi ciency. When you purchase an Atlas Copco power tool, you get the best that money can buy. Make sure you enjoy its full potential. Invest in one of our tool-specifi c Installation Proposals – for optimum productivity!

LSV 48 vs comp

Power 1.9 kW +30%

Weight 2.7 kg -30%

Height over spindle 78 mm -55%

Productivity +30%

BOOST POWER WITH THE RIGHT INSTALLATION

7” and 9” angle grinder

The perfect tool for heavy-duty applications where productivity is key. The low profi le angle head makes it possible to work in spaces you could never access with a vertical tool.

6600 rpm and 8500 rpm angle sander

The LSV 48 sander is a great choice for both rough and fi ne sanding applications. The angled starting handle and comfortable support handle give you excellent control. The lubrication-free motor keeps the sanded surface completely free from oil.

Kit for dust extraction in grinding and

sanding applications

A new kit is available for cutting in GRP, glass fi ber reinforced plastic.

ErgoNIP 10 10 m TURBO 16

8202 1180 46*

ErgoQIC 10

Installation Proposal for LSV 48

BALL VALVE +MIDI F/R 15 +ERGOQIC 108202 0845 48

Save 480 euro per monthOur power tools are designed to run at 6.3 bar, if the air pressure is lower then the effi ciency drops. Grinding at an air pressure that is just one bar lower leeds in many cases to 40% longer process time. If you use your grinder three hours per day and the cost for a working hour is 20 euro then the additional 1.2 hours the operator has to work due to the lower pressure costs the employer 24 euro per day. In a month this amounts to 480 euro. In other words, you can save a lot of money by using the correct air line.

Accessories

1 Depressed centre wheel Ordering No. 1 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18)2 Cut off wheel 2 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18) (Accessories included in LSV 48 SA066-23) Cut off wheel fl ange nut4 Backing pad 5/8” -11 Spindle 4 a Washer 4175 0879 80 4 b Backing pad 3780 2710 60 4 c Flange nut (5/8” -11) 4175 0893 00 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) M14 Spindle 4 b Backing pad 3780 2710 60 4 c Flange nut (M14) 4175 0893 01 (Optional accessories to LSV 48 SA085 M14, SA066 M14)5 Spiral cool 7” set (pad + fl ange nut) 5 a 5/8” thread 4170 1192 90 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) 5 a M14 thread 4170 1192 91 (Optional accessories to LSV 48 SA085 M14, SA066 M14)6 Piped away exhaust 4150 2049 90 (Optional accessories to LSV 48 SA085 Dust extraction kit for LSV 48 SA085 (8423 0132 02) Kit for depressed center wheel, dia 180 mm 3780 4093 41 Kit for fi ber disc, dia 180 mm 3781 4093 40 Kit for cutting GRP (for disc dia 180 mm) 3780 4093 42 Cutting disc, dia 180 mm (for above kit) 3781 5074 62

Air inlet thread BSP inch 1/2. a M14 spindle. b UNC 5/8”-11 spindle. c With dust extraction - for sanding with fi bre disc.

9833

152

5 01

E.C

.O R

ekla

mb

yrå

AB

. Ått

a.45

try

cker

i ab

200

8:1

1 2 4 5

4 a 5 a

1 a 2 a 4 b

4 c

6

6 a

Atlas Copco Angle GrindersLSV 48 – power, accessibility and safety

www.atlascopco.com

Technical data

Max Max Height Sound level

wheel fi bre Max over Air consumption at free

Speed dia disc dia output Weight spindle max op free speed speed

Model r/min mm mm kW hp kg lb mm in l/s cfm l/s cfm dB(A) Ordering No. Angle grinders LSV 48 SA 120-13a 12000 125 M14 1.9 2.5 2.5 5.5 78 3.1 36 76 17 36 89 8423 0132 07LSV 48 SA 085-18a 8500 180 M14 1.9 2.5 2.7 5.9 78 3.1 36 76 17 36 83 8423 0132 06LSV 48 SA 066-23B 6600 230 5/8” 1.9 2.5 2.9 6.4 82 3.2 36 76 17 36 83 8423 0132 08Angle sanders LSV 48 SA 085b 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 02LSV 48 SA 085 M14a 8500 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 03LSV 48 SA 066b 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 00LSV 48 SA 066 M14a 6600 180 1.9 2.5 2.3 5.1 78 3.1 36 76 17 36 83 8423 0132 01

Tool-specifi c airline accessory kits, for optimal performance and maximum cost effi ciency. When you purchase an Atlas Copco power tool, you get the best that money can buy. Make sure you enjoy its full potential. Invest in one of our tool-specifi c Installation Proposals – for optimum productivity!

LSV 48 vs comp

Power 1.9 kW +30%

Weight 2.7 kg -30%

Height over spindle 78 mm -55%

Productivity +30%

BOOST POWER WITH THE RIGHT INSTALLATION

7” and 9” angle grinder

The perfect tool for heavy-duty applications where productivity is key. The low profi le angle head makes it possible to work in spaces you could never access with a vertical tool.

6600 rpm and 8500 rpm angle sander

The LSV 48 sander is a great choice for both rough and fi ne sanding applications. The angled starting handle and comfortable support handle give you excellent control. The lubrication-free motor keeps the sanded surface completely free from oil.

Kit for dust extraction in grinding and

sanding applications

A new kit is available for cutting in GRP, glass fi ber reinforced plastic.

ErgoNIP 10 10 m TURBO 16

8202 1180 46*

ErgoQIC 10

Installation Proposal for LSV 48

BALL VALVE +MIDI F/R 15 +ERGOQIC 108202 0845 48

Save 480 euro per monthOur power tools are designed to run at 6.3 bar, if the air pressure is lower then the effi ciency drops. Grinding at an air pressure that is just one bar lower leeds in many cases to 40% longer process time. If you use your grinder three hours per day and the cost for a working hour is 20 euro then the additional 1.2 hours the operator has to work due to the lower pressure costs the employer 24 euro per day. In a month this amounts to 480 euro. In other words, you can save a lot of money by using the correct air line.

Accessories

1 Depressed centre wheel Ordering No. 1 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18)2 Cut off wheel 2 a Flange nut 4150 1160 02 (Accessories included in LSV 48 SA085-18) (Accessories included in LSV 48 SA066-23) Cut off wheel fl ange nut4 Backing pad 5/8” -11 Spindle 4 a Washer 4175 0879 80 4 b Backing pad 3780 2710 60 4 c Flange nut (5/8” -11) 4175 0893 00 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) M14 Spindle 4 b Backing pad 3780 2710 60 4 c Flange nut (M14) 4175 0893 01 (Optional accessories to LSV 48 SA085 M14, SA066 M14)5 Spiral cool 7” set (pad + fl ange nut) 5 a 5/8” thread 4170 1192 90 (Optional accessories to LSV 48 SA085, SA085 D, SA066, SA066D) 5 a M14 thread 4170 1192 91 (Optional accessories to LSV 48 SA085 M14, SA066 M14)6 Piped away exhaust 4150 2049 90 (Optional accessories to LSV 48 SA085 Dust extraction kit for LSV 48 SA085 (8423 0132 02) Kit for depressed center wheel, dia 180 mm 3780 4093 41 Kit for fi ber disc, dia 180 mm 3781 4093 40 Kit for cutting GRP (for disc dia 180 mm) 3780 4093 42 Cutting disc, dia 180 mm (for above kit) 3781 5074 62

Air inlet thread BSP inch 1/2. a M14 spindle. b UNC 5/8”-11 spindle. c With dust extraction - for sanding with fi bre disc.

9833

152

5 01

E.C

.O R

ekla

mb

yrå

AB

. Ått

a.45

try

cker

i ab

200

8:1

1 2 4 5

4 a 5 a

1 a 2 a 4 b

4 c

6

6 a

Atlas Copco Angle GrindersLSV 48 – power, accessibility and safety