bopp films - waterfall-pro.ru · gpr transparent non-heat sealable bopp film with release effect...

BOPP FILMSTECHNICAL DATA SHEETS

2a Shapkina Str., Shakhty, Rostov region, Russia, 346510, tel.: +7 (8636) 20-00-30, e-mail: [email protected] floor, Suite 32, Federation-East Tower, MIBC Moscow-City, 12, Presnenskaya Embankment, Moscow, 123317, tel.: +7 (499) 643-83-31, e-mail: [email protected]

WWW.WATERFALL-PRO.RU

TRANSPARENT FILMS

GP Transparent heat sealable BOPP film for printing, lamination and packaging

SG Transparent non-heat sealable BOPP film for scotch tape

FG Transparent non-heat sealable BOPP film for printing and decorative package

GPR Transparent non-heat sealable BOPP film with release effect for flexible packaging with glue border of cold adhesion

GPLS Transparent heat sealable BOPP film with low heat sealing properties for printing, lamination and packaging

GA Transparent heat sealable anti-fog BOPP film for printing and packaging

TOBACCO FILMS

TG Transparent heat sealable non-shrinkable BOPP film for “soft” paper packs packaging on high-speed machines

TS Transparent heat sealable shrinkable BOPP film with low coefficient of friction for “hard” paper packs packaging on high-speed machines

TSH Transparent heat sealable shrinkable BOPP film with a very low coefficient of friction for “hard” paper packs packaging on high-speed ma-

chines

TSLS Transparent heat sealable shrinkable BOPP film with a low threshold of heat sealability with a very low coefficient of friction for “hard” paper

packs packaging on high-speed machines

TSP Transparent heat sealable shrinkable BOPP film with a very low coefficient of friction for “hard” paper packs packaging on the high-speed

machines

MATTE FILMS

MP BOPP film with matte side and glossy treated side for printing and lamination

MPLS BOPP film with matte heat sealable side with a low threshold of heat sealability and glossy treated side for printing and lamination

MPRBOPP film with matte side with release effect for production of flexible packaging with glue border of cold adhesion and glossy treated side for

printing and lamination

MPP BOPP film with matte side and glossy side and double-sided treatment for printing and lamination

MDS BOPP film with matte on both sides and treatment on one side for printing and packaging

CAVITATED FILMS

WP White heat sealable BOPP film with a low coefficient of friction for printing, lamination and packaging

PP White-pearlized cavitated heat sealable BOPP film for printing, lamination and packaging

PPLS White-pearlized cavitated heat sealable with low heat sealability BOPP film for printing, lamination and packaging

LABEL FILMS

GL Transparent BOPP label film

PL White-pearlized BOPP label film

PLG White-pearlized BOPP label film with high gloss

PLMM Metallized on white-pearlized cavitated base BOPP label film

METALLIZED FILMS

GMM Metallized on transparent base heat sealable BOPP film for printing, lamination and packaging

GMPM Metallized on transparent base non-heat sealable BOPP film for printing, lamination and decorative packaging

GMBM Metallized on transparent base BOPP film for printing, lamination and packaging

GMLSM Metallized on transparent base heat sealable with low heat sealing threshold BOPP film for printing, lamination and packaging

PMM Metallized on cavitated white-pearlized layer heat sealable BOPP film for printing and lamination

Description

Attention! Information specified in this document is for reference only; it contains averaged technical characteristics of Waterfall Pro LLC products based on results of laboratory tests performed in Waterfall Pro LLC standard operation conditions. Waterfall Pro LLC gives no representations and/or warranties and is expressly relived from any liability for infringement of any third parties’ intellectual property rights arising from processing of Waterfall Pro LLC products. Testing of Waterfall Pro LLC products in order to determine their suitability in terms of meeting specific objectives of a person intending to purchase Waterfall Pro LLC products is the sole responsibility of such a person who shall be responsible for any consequences related to processing and use of Waterfall Pro LLC products.This document does not constitute a quotation and its provision to any person shall not create any rights and duties on the part of Waterfall Pro LLC.



Transparent heat sealable BOPP film for printing, lamination and packaging

GP

Properties Unit Limit Method Value

Thickness μm ±5%

WATERFALL PRO

12 15 18 20 25 30 35 40 48

Density g/cm3 ±10% 0,91

Weight m2 g/m2 ±5% 10,92 13,65 16,38 18,20 22,75 27,30 31,85 36,40 43,68

Tensile strengthMD N/mm²

(MPa)not less ASTM D882

ISO 527GOST 14236

130 140

TD 230 250

Elongation at breakMD

% not more220 200

TD 80 70

Kinetic coefficient of friction

untreated side/untreated side

- ±0,10ASTM D1894

ISO 8295GOST 27492

0,25

Shrinkage at 120˚С, 5 minMD

% not moreASTM D1204

ISO 11501GOST 18616

5 4

TD 3 2

Heat sealing strength at 130˚С, 1 bar, 1 sec*


N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 2,2 2,3 2,5 2,8

Heat sealing temperature*untreated side/untreated side

0С - WATERFALL PRO 105-140

Haze - % not moreASTM D1003

ISO 14782GOST 15875

2,5 3,0 3,2

Gloss untreated side % not lessASTM D2457

ISO 281385

Surface tension** treated sidemN/n

(dyn/cm)not less

ASTM D2578ISO 8296

38

MD – Machine Direction; TD – Transverse Direction* the typical values are indicated, guaranteed only for untreated side** with double-side treatment (if ordered), the activation of the second side (usually the inside of the roll) is not less than 36 mN/mWith double-side processing – strength and range of welding are not applicableKinetic coefficient of friction in 15 days from the date of production

Main characteristics• low coefficient of friction• good optical properties• contains slip-antistatic and anti-block additives

ApplicationFor packing

• different products: food industry, goods for household use, for industrial goods and others• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) and cold (using cold glue) seal formation• Flow-Pack • self using in decorative packaging

For lamination• with other films and materials• with method of the solvent or nonsolvent (extrusion) lamination

For printing• high-quality rotogravure and flexographic print• with the use of solvent paint• method of direct and reverse printing

Storage• Films should be stored on the pallets in a closed dry place and should not be exposed to direct sunlight, at a safe distance of not less than 1 m from heating devices or anything that can cause damage the package.• The film should be kept in workplace not less than 48 hours before being used.• Guaranteed storage period – 6 months from production date.

TreatmentThe guaranteed period for maintaining the minimum permissible level of surface tension on the activated film surface from the date of manufacture, subject to proper storage conditions, is:• for all film types (exept metallized) – 6 months;• for metallized film – 3 months.In the interests of minimizing the deterioration of surface dressing level, it is recommended to store the film at a temperature of no higher than 30°C and use it in a short time.

RecyclingIn the process of printing and lamination it is recommended to perform corona treatment.

Reeling• Maximum roll diameter: 800 mm• Film width in a roll from 290 to 2000 mm• Diameter of paper cores (inside): 76, 152 mm

Description




Transparent non-heat sealable BOPP film for scotch tape

SG


Thickness μm ±5%

WATERFALL PRO

18 20 23 25 26 27 28 30 32 35 40


Weight m2 g/m2 ±5% 16,38 18,20 20,90 22,80 23,70 24,57 25,50 27,30 29,10 31,90 36,40

Tensile strengthMD N/mm²


ISO 527GOST 14236

150 140

TD 250


% not more200

TD 70



- ±0,10ASTM D1894

ISO 8295GOST 27492

0,35



ISO 11501GOST 18616

4

TD 2

Heat sealing strength at 130˚С, 1 bar, 1 sec* - N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable

Heat sealing temperature - 0С - WATERFALL PRO non-heat sealable


ISO 14782GOST 15875

2,0

Gloss treated side % not lessASTM D2457

ISO 281385

Surface tension treated sidemN/n

(dyn/cm)not less

ASTM D2578ISO 8296

38

MD – Machine Direction; TD – Transverse Direction

Main characteristics• good optical properties – transparency and gloss• good mechanical properties• low shrinkable for maintaining print sizes during glue drying

Application• use for adhesive tapes production – the scotch with melt and waterborne glues• self using in decorative package

For lamination• with other films and materials (if necessary)• with method of the solvent or nonsolvent (extrusion) lamination

For printing• high-quality rotogravure and flexographic print• with the use of solvent paint





Description




Transparent non-heat sealable BOPP film for printing and decorative package

FG


Thickness μm ±5%

WATERFALL PRO

20 25 30 35 40


Weight m2 g/m2 ±5% 18,20 22,80 27,30 31,90 36,40

Tensile strengthMD

N/mm² (MPa) not less ASTM D882ISO 527

GOST 14236

140

TD 250


% not more200

TD 70

Kinetic coefficient of frictionuntreated side/untreated side

- ±0,10ASTM D1894

ISO 8295GOST 27492

0,4



ISO 11501GOST 18616

4

TD 2

Heat sealing strength at 130˚С, 1 bar, 1 sec - N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

2,0


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• high coefficient of friction• high transparency and gloss• used as a face film of a package with high gloss

Application• for exepting heat sealability on the package front side• for manual and machine product wrapping (flowers, gifts, office, textile products etc.)

For packing• for excepting heat sealability

For lamination• with other films and materials (if necessary) • with method of the solvent or nonsolvent (extrusion) lamination






Description




Transparent non-heat sealable BOPP film with release effect for flexible packaging with glue border of cold adhesion

GPR


Thickness μm ±5%

WATERFALL PRO

15 20 25 30 35


Weight m2 g/m2 ±5% 13,65 18,20 22,75 27,30 31,85

Tensile strengthMD


GOST 14236

150 140

TD 250


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

5 4

TD 2 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

2,0


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38

MD – Machine Direction; TD – Transverse DirectionKinetic coefficient of friction in 15 days from the date of production

Main characteristics• high release characteristics• low coefficient of friction• high transparent

Application• for reopening/reclosing of package

For packing• on the HFFS packaging machines• with cold (using cold glue) seal formation• with cold glue for one-and reopening

For lamination• with other films and materials • with method of the solvent or nonsolvent (extrusion) lamination






Description




Transparent heat sealable BOPP film with low heat sealing properties for printing, lamination and packaging

GPLS


Thickness μm ±5%

WATERFALL PRO

20 25 30 35 40


Weight m2 g/m2 ±5% 18,20 22,80 27,30 31,90 36,40

Tensile strengthMD


GOST 14236

130

TD 250


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,3 2,5 2,8




ISO 14782GOST 15875

3,0


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38

MD – Machine Direction; TD – Transverse Direction* the typical values are indicated, guaranteed only for untreated side** with double-side treatment (if ordered), the activation of the second side (usually the inside of the roll) is not less than 36 mN/mWith double-side processing – strength and range of welding are not applicableKinetic coefficient of friction in 15 days from the date of producton

Main characteristics• low heat sealing temperature• low coefficient of friction• good optical properties

Application• to reduce the temperature of heat sealing• to increase the speed of heat sealing

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formed at lower heat sealing temperatures (from 80°C)• Flow-Pack• self using in decorative packaging


For printing• high-quality rotogravure and flexographic print• with the use of solvent paint• method of direct and reverse printing





Description




Transparent heat sealable anti-fog BOPP film for printing and packaging

GA


Thickness μm ±5%

WATERFALL PRO

20 25 30 35 40


Weight m2 g/m2 ±5% 18,20 22,80 27,30 31,90 36,40

Tensile strengthMD


GOST 14236

130 140

TD 230 250


% not more220 200

TD 80 70


non-functional side/non-functional side

- ±0,10ASTM D1894

ISO 8295GOST 27492

0,25functional side/functional side



ISO 11501GOST 18616

5 4

TD 2 2

Heat sealing strength at 130˚С, 1 bar, 1 sec

functional side/non-functional side

N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,3 2,8

Heat sealing temperaturefunctional side/

non-functional side0С - WATERFALL PRO 120-140


ISO 14782GOST 15875

3,0 3,2

Gloss non-functional side % not lessASTM D2457

ISO 281385

Surface tension non-functional sidemN/n

(dyn/cm)not less

ASTM D2578ISO 8296

38

Anti-fog properties functional side point not less WATERFALL PRO 4

MD – Machine Direction; TD – Transverse DirectionFunctional side – side with anti-fog effect

Main characteristics• good anti-fog properties from + 4°C and above• low coefficient of friction• one side has anti-fog properties• the other side is for printing

Application• for packaging products which require no fogging, contributing to the preservation of the basic properties of perishable products: fresh vegetables, salads, fruits, hot food, semi-finished products of flour products (dough), etc.

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formation• Flow-Pack

For lamination• with other films and materials (the change in anti-fog properties after lamination was not studied)• with method of the solvent lamination

For printing• high-quality rotogravure and flexographic print• with the use of solvent paint• method of direct printing





Description




Transparent heat sealable non-shrinkable BOPP film for “soft” paper packs packag-ing on high-speed machines

TG


Thickness μm ±5%

WATERFALL PRO

16 18 20 25 30


Weight m2 g/m2 ±5% 14,56 16,40 18,20 22,80 27,30

Tensile strengthMD


GOST 14236

130 140

TD 230 250


% not more220 200

TD 80 80


outer side in a roll /outer side in a roll

-+0,05-0,10

ASTM D1894ISO 8295

GOST 27492

0,25

inner side in a roll /inner side in a roll

0,3



ISO 11501GOST 18616

4

TD 2


inner side in a roll /outer side in a roll

N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5

Heat sealing temperatureinner side in a roll /outer side in a roll



ISO 14782GOST 15875

2,5

Gloss outer side in a roll % not lessASTM D2457

ISO 281385


Main characteristics• standart shrinkable• standart coefficient of friction• high rigidity• high gloss• high transparent

Application• for wrapping “soft” and “hard” paper packs of cigarettes, cigarette blocks, tea, marshmallows, sweets, perfumes, etc.

For packing• on the high-speed HFFS packaging machines without a thermotunnel• with hot (heat sealing) seal formation• “soft” and “hard” paper packs and boxes


Reeling• Maximum roll diameter: 500 mm• Film width in a roll from 90 to 450 mm• Diameter of paper cores (inside): 76 mm

Description




Transparent heat sealable shrinkable BOPP film with low coefficient of friction for “hard” paper packs packaging on high-speed machines

TS


Thickness μm ±5%

WATERFALL PRO

16 18 20


Weight m2 g/m2 ±5% 14,56 16,38 18,20

Tensile strengthMD


GOST 14236

150

TD 260


% not more180

TD 65



(slippery side / slippery side)-

+0,05-0,10

ASTM D1894ISO 8295

GOST 27492

0,25

inner side in a roll / inner side in a roll

(non-slip side / non-slip side)0,3


% -ASTM D1204

ISO 11501GOST 18616

6,5-9,0

TD 6,5-9,0


inner side in a roll / outer side in a roll

(non-slip side / slippery side)N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5

Heat sealing temperature inner side in a roll /outer side in a roll

(non-slip side / slippery side)



ISO 14782GOST 15875

2,5

Glossouter side in a roll

(slippery side)% not less

ASTM D2457ISO 2813

85


Main characteristics• high hardness• high gloss • high transparent• low stable coefficient of friction, including over heated surfaces

Application• for wrapping “hard” paper packs of cigarettes, cigarette blocks, tea, marshmallows, sweets, etc.• for film tightening of packs due to shrinkable properties of the film• for tightening packs small and medium sizes

For packing• on the high-speed HFFS packaging machines with a thermotunnel• on the high-speed HFFS packaging machines without a thermotunnel where the film shrink is able due to heating of the weld seal• with hot (heat sealing) seal formation• “hard” paper packs



Description




Transparent heat sealable shrinkable BOPP film with a very low coefficient of friction for “hard” paper packs packaging on high-speed machines

TSH


Thickness μm ±5%

WATERFALL PRO

16 18 20


Weight m2 g/m2 ±5% 14,56 16,38 18,20

Tensile strengthMD


GOST 14236

140

TD 260


% not more180

TD 70



(slippery side / slippery side)- ±0,05

ASTM D1894ISO 8295

GOST 27492

0,15




% ±1,0 ASTM D1204ISO 11501

GOST 18616

8,5

TD 6,5


% ±2,012,0

TD 12,0




ASTM F88/F88MD882

ISO 527GOST 27319

2,5





ISO 14782GOST 15875

2,8



ASTM D2457ISO 2813

85


Main characteristics• resistant to scratching and abrasion• low stable coefficient of friction asymmetric, including over heated surfaces• high hardness• high transparent• high gloss





Description




Transparent heat sealable shrinkable BOPP film with a low threshold of heat sealability with a very low coefficient of friction for “hard” paper packs packaging on high-speed machines

TSLS


Thickness μm ±5%

WATERFALL PRO

20 25 30


Weight m2 g/m2 ±5% 18,20 22,75 27,30

Tensile strengthMD


GOST 14236

140

TD 260


% not more160

TD 70


outer side in a roll / outer side in a roll

(slippery side / slippery side)- ±0,05

ASTM D1894ISO 8295

GOST 27492

0,15




% ±1,0 ASTM D1204ISO 11501

GOST 18616

8,5

TD 6,5


% ±2,012,0

TD 12,0




ASTM F88/F88MD882

ISO 527GOST 27319

2,5





ISO 14782GOST 15875

2,3 2,5 3,0



ASTM D2457ISO 2813

85


Main characteristics• resistant to scratching and abrasion• low stable coefficient of friction asymmetric, including over heated surfaces• high hardness• high transparent• high gloss


For packing• on the high-speed HFFS packaging machines with a thermotunnel• on the high-speed HFFS packaging machines without a thermotunnel where the film shrink is able due to heating of the weld seal• with hot (heat sealing) seal formed at lower heat sealing temperatures (from 90°C)• “hard” paper packs



Description




Transparent heat sealable shrinkable BOPP film with a very low coefficient of friction for “hard” paper packs packaging on the high-speed machines

TSP


Thickness μm ±5%

WATERFALL PRO

16 18 20 25


Weight m2 g/m2 ±5% 14,56 16,38 18,20 22,75

Tensile strengthMD


GOST 14236

150

TD 260


% not more180

TD 70


- ±0,05ASTM D1894

ISO 8295GOST 27492

0,15


% ±1,0 ASTM D1204ISO 11501

GOST 18616

8,5

TD 6,5


% ±2,012,0

TD 12,0


treated side/untreated side

N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0

Heat sealing temperaturetreated side/

untreated side 0С - WATERFALL PRO 105-140


ISO 14782GOST 15875

2,8


ISO 281385

Surface tension* treated sidemN/n (dyn/

cm)not less

ASTM D2578ISO 8296

38

MD – Machine Direction; TD – Transverse Direction*Measure after treatment with n-heptane

Main characteristics• activated for printing• resistant to scratching and abrasion• low stable coefficient of friction asymmetric, including over heated surfaces• high hardness• high gloss• high transparent



For printing• high-quality rotogravure and flexographic print• with the use of special paints


Treatment The guaranteed period for maintaining the minimum permissible level of surface tension on the activated film surface from the date of manufacture, subject to proper storage conditions, is: • for all film types (exept metallized) – 6 months; • for metallized film – 3 months.

Recycling• In the process of printing on activated tobacco films it is recommended not to perform corona treatment.


Description




BOPP film with matte side and glossy treated side for printing and lamination

MP


Thickness μm ±5%

WATERFALL PRO

15 20 35


Weight m2 g/m2 ±5% 13,65 18,20 31,85

Tensile strengthMD


GOST 14236

125

TD 240


% not more220

TD 80

Kinetic coefficient of friction matte side/ matte side - ±0,15ASTM D1894

ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2

Heat sealing strength at 140˚С, 1 bar, 1 sec* matte side/ matte side N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 2,3 2,5

Heat sealing temperature* matte side/ matte side 0С - WATERFALL PRO 130-140

Haze - % not lessASTM D1003

ISO 14782GOST 15875

70

Gloss matte side % not moreASTM D2457

ISO 281312

Surface tension**treated side(glossy side)

mN/n (dyn/cm) not lessASTM D2578

ISO 829638

MD – Machine Direction; TD – Transverse DirectionMatte side – untreated side* the typical values are indicated, guaranteed only for untreated side** with double-side treatment (if ordered), the activation of the second side (usually the inside of the roll) is not less than 36 mN/mWith double-side processing – strength and range of welding are not applicableKinetic coefficient of friction in 15 days from the date of producton

Main characteristics• one side: matte (rough) not activated• the other side: gloss (smooth) activated for reverse printing• high haze, low gloss• low coefficient of friction

Application• as a face film of the package, to make the package matte – “silk” or “paper” kind

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formation, if it is necessary – «overlap»• Flow-Pack and standing packet VFFS • self using in decorative packaging• possibility of application for wrap-around label







Description




BOPP film with matte heat sealable side with a low threshold of heat sealability and glossy treated side for printing and lamination

MPLS


Thickness μm ±5%

WATERFALL PRO

15 18 20 35


Weight m2 g/m2 ±5% 13,65 16,38 18,20 31,85

Tensile strengthMD


GOST 14236

125

TD 240


% not more220

TD 80


ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2

Heat sealing strength at 130˚С, 1 bar, 1 sec* matte side/ matte side N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 2,3 2,5

Heat sealing temperature* matte side/ matte side 0С - WATERFALL PRO 110-140


ISO 14782GOST 15875

70


ISO 281312

Surface tension**treated side(glossy side)

mN/n(dyn/cm)

not lessASTM D2578

ISO 829638

MD – Machine Direction; TD – Transverse DirectionMatte side – untreated side* the typical values are indicated, guaranteed only for untreated side** with double-side treatment (if ordered), the activation of the second side (usually the inside of the roll) is not less than 36 mN/m With double-side processing – strength and range of welding are not applicableKinetic coefficient of friction in 15 days from the date of producton

Main characteristics• one side: matte (rough) not activated with a low barrier of friction (from 110˚С)• the other side: gloss (smooth) activated for reverse printing• high haze, low gloss• low coefficient of friction

Application• as a face film of the package, to make the package matte – “silk” or “paper” kind

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formation, if it is necessary – «overlap» on lower temperatures of heat sealable (from 110°С)• Flow-Pack and standing packet VFFS• self using in decorative packaging• application for a wrap-around label







Description




BOPP film with matte side with release effect for production of flexible packaging with glue border of coldadhesion and glossy treated side forprinting and lamination

MPR


Thickness μm ±5%

WATERFALL PRO

15 18 20


Weight m2 g/m2 ±5% 13,65 16,38 18,20

Tensile strengthMD


GOST 14236

125

TD 240


% not more220

TD 80


ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2

Heat sealing strength at 140˚С, 1 bar, 1 sec matte side/ matte side N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable

Heat sealing temperature matte side/ matte side 0С - WATERFALL PRO non-heat sealable


ISO 14782GOST 15875

70


ISO 281312

Surface tensiontreated side(glossy side)

mN/n(dyn/cm)

not lessASTM D2578

ISO 829638

MD – Machine Direction; TD – Transverse DirectionMatte side – untreated sideKinetic coefficient of friction in 15 days from the date of producton

Main characteristics• one side: matte (rough) with a high release effect• the other side: gloss (smooth) activated for reverse printing• high haze, low gloss• low coefficient of friction

Application• as a face film of the package, to make the package matte – “silk” or “paper” kind• for possibility of reopening/reclosing package

For packing• on the HFFS packaging machines• with cold (using cold glue) seal formation• with cold glue for one-and reopening• Flow-Pack







Description




BOPP film with matte side and glossy side and double-sided treatment for printing and lamination

MPP


Thickness μm ±5%

WATERFALL PRO

15 20 35


Weight m2 g/m2 ±5% 13,65 18,20 31,85

Tensile strengthMD


GOST 14236

125

TD 240


% not more220

TD 80


ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

70


ISO 281312

Surface tensiontreated

sidematte side mN/n

(dyn/cm)not less

ASTM D2578ISO 8296

38glossy side

MD – Machine Direction; TD – Transverse DirectionKinetic coefficient of friction after 15 days from the date of producton

Main characteristics• matte side has roughness and diffuses light. When filling the roughness (with water or laquer) the film in these places becomes glossy and transparent. It allows to highlight objects of reverse printing• low coefficient of friction

Application• as a face film of the package, to give the package matte – “silk” or “paper” look• for highlightning objects of reverse printing. When filling the roughness of the matte surface with water or laquer, the film in these places becomes glossy and transparent

For packing• on the high-speed HFFS and VFFS packaging machines• use for decorative packaging







Description




BOPP film with matte on both sides and treatment on one side for printing and packaging

MDS


Thickness μm ±5%

WATERFALL PRO

20 30 35


Weight m2 g/m2 ±5% 18,20 27,30 31,85

Tensile strengthMD


GOST 14236

120

TD 240


% not more220

TD 80


- ±0,15ASTM D1894

ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,3 2,4 2,5




ISO 14782GOST 15875

70

Gloss untreated side % not moreASTM D2457

ISO 281312


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• matte look from the both sides• slip-antistatic additives

Application• for contact with food• to give the package matte – “silk” or “paper” look• for manual and machine product wrapping (flowers, gifts, textile products etc.)• string heat sealing is possible

For packing• decorative packaging

For printing• high-quality flexographic print• with the use of solvent paint





Description




White heat sealable BOPP film with a low coefficient of friction for printing, lamina-tion and packaging

WP


Thickness μm ±5%

WATERFALL PRO

15 20 25 30 35


Weight m2 g/m2 ±5% 14,40 19,20 24,00 28,80 33,60

Tensile strengthMD


GOST 14236

110 120

TD 210 220 230


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,25



ISO 11501GOST 18616

4

TD 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5



Optical transmission - % not moreASTM D1003

ISO 14782GOST 15875

60 50 45 40 35


ISO 281345


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• all white non-transparent appearance• stable low coefficient of friction• good UV light protection of packaged goods

Application• for the production of flexible packaging for products which require protection from UV-light: ice cream, chocolate, flour, curd products, sweets and etc.• for the production of cut-and-stack bottle labels in the original films form or in lamination

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) and cold (using cold glue) seal formation• Flow-Pack







Description




White-pearlized cavitated heat sealable BOPP film for printing, lamination and packaging

PP


Thickness μm ±5%

WATERFALL PRO

30 35 40 45


Weight m2 g/m2 ±5% 21,60 25,20 28,80 32,40

Tensile strengthMD


GOST 14236

70

TD 140


% not more200

TD 60

Kinetic coefficient of frictionuntreated side /untreated side

-+0,10-0,15

ASTM D1894ISO 8295

GOST 274920,3



ISO 11501GOST 18616

4

TD 2


untreated side /untreated side

N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5

Heat sealing temperature*untreated side /untreated side



ISO 14782GOST 15875

40 35 30


ISO 281380


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• protection from UV light• all white appearance with a high level of non-transparency and gloss• lowered density and high yield• film color allows to exclude white paint from printing• color printing on this film is brighter

Application• for packaging of products which require protection from UV-light: ice cream, chocolate, flour, curd products, sweets and etc.








Description




White-pearlized cavitated heat sealable with low heat sealability BOPP film for printing, lamination and packaging

PPLS


Thickness μm ±5%

WATERFALL PRO

30 35 40 45


Weight m2 g/m2 ±5% 21,60 25,20 28,80 32,40

Tensile strengthMD


GOST 14236

70

TD 140


% not more200

TD 60


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,2



ISO 11501GOST 18616

4

TD 2


untreated side /untreated side

N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5

Heat sealing temperature*untreated side /untreated side



ISO 14782GOST 15875

40 35 30


ISO 281380


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• low heat sealing temperature• protection from UV light• all white appearance with a high level of non-transparency and gloss• lowered density and high yield• film color allows to exclude white paint from printing• color printing on such film is brighter

Application• for packaging of products which require protection from UV-light: ice cream, chocolate, flour, curd products, sweets and etc.

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formed at lower heat sealing temperatures (from 80°C)• Flow-Pack







Description




Transparent BOPP label film

GL


Thickness μm ±5%

WATERFALL PRO

30 35 40 45 48 50


Weight m2 g/m2 ±5% 27,30 31,90 36,40 40,95 43,68 45,50

Tensile strengthMD


GOST 14236

140

TD 280


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,35



ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

2,0


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• absence of statics• excellent optical properties• high print adhesion• good slip• high labeling speed

Application• for cut-and-stack bottle labels• for the production of self-adhesive labels at 48-60 μm

For labeling machines• with production speed of 10 000 – 40 000 bottles/hour• with the use of cold and molten glue

For printing• high-quality rotogravure and flexographic print• with the use of special UV-offset and UV-flexo inks with primer coating• direct or riverse print





Description




White-pearlized BOPP label film

PL


Thickness μm ±5%

WATERFALL PRO

35 38


Weight m2 g/m2 ±5% 23,80 25,84

Tensile strengthMD


GOST 14236

80

TD 150


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,3



ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

30


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• high print adhesion• high antistatic properties• high level of non-transparency and gloss• good whiteness• preserves label form• high labeling speed

Application• for wrap-around label for PET bottles• for production of self-adhesive labels at 48-60 μm


For printing• high-quality rotogravure and flexographic print• with the use of special UV-offset and UV-flexo inks with primer coating• direct





Description




White-pearlized BOPP label film with high gloss

PLG


Thickness μm ±5%

WATERFALL PRO

35 38


Weight m2 g/m2 ±5% 23,80 25,84

Tensile strengthMD


GOST 14236

75

TD 145


% not more190

TD 65

Kinetic coefficient of frictionuntreated

side /untreated side

- ±0,10ASTM D1894

ISO 8295GOST 27492

0,3



ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



ISO 14782GOST 15875

30 25


ISO 281385


(dyn/cm)not less

ASTM D2578ISO 8296

38


Main characteristics• high level of gloss • high print adhesion• high antistatic properties• high level of non-transparency• preserves label form• high labeling speed

Application• for wrap-around label for PET bottles• for production of self-adhesive labels at 48-60 μm







Description




Metallized on white-pearlized cavitated base BOPP label film

PLMM


Thickness* μm ±5%

WATERFALL PRO

35 38 47

Density* g/cm3 ±10% 0,70

Weight m2* g/m2 ±5% 24,50 26,60 32,90

Tensile strength*MD


GOST 14236

80

TD 150

Elongation at break*MD

% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,35

Shrinkage at 120˚С, 5 min*MD


ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



(dyn/cm)not less

ASTM D2578ISO 8296

36

Optical density treated side OD not less WATERFALL PRO 1,8

MD – Machine Direction; TD – Transverse Direction* performance is measured on BOPP film – base for metallization** guaranteed conservation period of activation on metallized side of film is 3 months from production date specified on identification roll tag

Main characteristics• extra smooth surface and high gloss of metallized side• excellent adhesion of alluminium layer• lowered density and high yield• high level of transparency• good whiteness

Application• for wrap-around label for bottles• for production of self-adhesive labels




Treatment The guaranteed period for maintaining the minimum permissible level of surface tension on the activated film surface from the date of manufacture, subject to proper storage conditions, is:• for all film types (exept metallized) – 6 months; • for metallized film – 3 months.In the interests of minimizing the deterioration of surface dressing level, it is recommended to store the film at a temperature of no higher than 30°C and use it in a short time.

Recycling• It’s recommended to use primer when printing on metallized surface.

Reeling• Maximum roll diameter: 800 mm• Film width in roll from 290 to 2000 mm• Diameter of paper cores (inside): 76, 152 mm

Description




Metallized on transparent base heat seal-able BOPP film for printing, lamination and packaging

GMM


Thickness* μm ±5%

WATERFALL PRO

12 15 18 20 25 30 35 40


Weight m2 * g/m2 ±5% 10,92 13,65 16,38 18,20 22,75 27,30 31,85 36,40

Tensile strength*MD N/mm²


ISO 527GOST 14236

130 140

TD 230 250


% not more220 200

TD 80 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,3



ISO 11501GOST 18616

5 4

TD 3 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 2,2 2,3 2,5 2,8




(dyn/cm)not less

ASTM D2578ISO 8296

36

Optical density - OD not less WATERFALL PRO 1,8

WVTR-water vapour transmission rate at 38°C, 90% rel. humidity, 24 h g/m²/24h not more ASTM F1249 1,0

OTR-oxygen transmission rate at 23°С, 0% rel. humidity, 24 h sm³/m²/24h not more ASTM D3985 100


Main characteristics• long-term activation• excellent adhesion of alluminium cover• excellent optical properties• excellent barrier properties• stable regular coefficient of friction

Application• for improvement of barrier properties of package• for wrap-around label for bottles


For lamination• with other films and materials in duplex, triplex• with method of the solvent or nonsolvent (extrusion) lamination

For printing• high-quality rotogravure and flexographic print• using solvent paint





Description




Metallized on transparent base non-heat sealable BOPP film for printing,lamination and decorative packaging

GMPM


Thickness* μm ±5%

WATERFALL PRO

20 25 30 35 40


Weight m2* g/m2 ±5% 18,20 22,75 27,30 31,85 36,40

Tensile strength*MD


GOST 14236

140

TD 250


% not more200

TD 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,35



ISO 11501GOST 18616

4

TD 2


ASTM F88/F88MD882

ISO 527GOST 27319

non-heat sealable



(dyn/cm)not less

ASTM D2578ISO 8296

36



Main characteristics• long-term activation• excellent adhesion of alluminium cover• excellent optical properties• regular barrier properties• high coefficient of friction

Application• for decorative packaging/wrapping• for packet machines• for packaging tape production• for wrap-around label for bottles

For packing• in cases, when heat sealing is not required• with hot (heat sealing) and cold (using cold glue) seal formation• manual application in decorative packaging







Description




Metallized on transparent base BOPP film for printing, lamination and packaging

GMBM


Thickness* μm ±5%

WATERFALL PRO

18 20 25 30 35 40


Weight m2 * g/m2 ±5% 16,38 18,20 22,75 27,30 31,85 36,40

Tensile strength*MD


GOST 14236

130 140

TD 230 250


% not more220 200

TD 80 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,3



ISO 11501GOST 18616

5 4

TD 3 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 3,0 3,2




(dyn/cm)not less

ASTM D2578ISO 8296

36





Main characteristics• excellent barrier properties• long-term activation• excellent adhesion of alluminium cover• excellent optical properties• stable regular coefficient of friction

Application• for packaging of products which require high barrier properties: bisquits, chips, waffles and etc.• for extension of products storage period








Description




Metallized on transparent base heat sealable with low heat sealing threshold BOPP film for printing, lamination and packaging

GMLSM


Thickness* μm ±5%

WATERFALL PRO

15 20 25 30 35 40


Weight m2 * g/m2 ±5% 13,65 18,20 22,75 27,30 31,85 36,40

Tensile strength*MD


GOST 14236

130 140

TD 230 250


% not more220 200

TD 80 70


- ±0,10ASTM D1894

ISO 8295GOST 27492

0,3



ISO 11501GOST 18616

5 4

TD 3 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,0 2,3 2,5 2,8




(dyn/cm)not less

ASTM D2578ISO 8296

36





Main characteristics• long-term activation• low heat sealing temperature• excellent adhesion of alluminium cover• excellent optical properties• excellent barrier properties• stable regular coefficient of friction

Application• for improvement of package’s barrier properties• for decreasing temperature of heat sealing• for increasing speed of heat sealing

For packing• on the high-speed HFFS and VFFS packaging machines• with hot (heat sealing) seal formed at lower heat sealing temperatures (from 80°C)• Flow-Pack







Description




Metallized on cavitated white-pearlized layer heat sealable BOPP film for printing and lamination

PMM


Thickness* μm ±5%

WATERFALL PRO

30 35 40

Density* g/cm3 ±10% 0,70

Weight m2* g/m2 ±5% 21,00 24,50 28,00

Tensile strength*MD


GOST 14236

70

TD 140


% not more200

TD 60


-+0,10-0,15

ASTM D1894ISO 8295

GOST 274920,3



ISO 11501GOST 18616

4

TD 2



N/15 mm not less

ASTM F88/F88MD882

ISO 527GOST 27319

2,5




(dyn/cm)not less

ASTM D2578ISO 8296

36





Main characteristics• long-term activation• activation on both sides on demand• excellent adhesion of alluminium cover• excellent optical properties• excellent barrier properties• high coefficient of friction• lowered density and high yield

Application• for packaging of products which require high barrier properties and protection from UV-light: ice-cream, chocolate and etc.• for extension of products storage period








bopp films - waterfall-pro.ru · gpr transparent non-heat sealable bopp film with release effect...

Documents