boq- pani bhaban

BILL OF QUANTITIES

Name of Project : Cyclone Shelter at Chaddaghar, Barguna.

CIVIL WORKS : FOUNDATION AND SUPER STRUCTURE

SL Rate in Figure and Works NO. Description of Item Quantity Unit (To be Quoted) Quoted Amount

in figure in word in Taka 1 2 3 4 5 6 7

PILE WORK1

3700 cft 210.00 777,000.00

2

2000 Ft 130.00 260,000.00

3 REINFORCEMENT IN RCC PILE

BORED CAST IN SITU PILES 450 mm dia bored cast in-situ RCC pile of 18m max. length from cutoff level in foundation works as per design and drawing with a concrete mix of 1:1.5:3 providing portland cement, sand (FM 2.5) and 19mm down well graded approved best quality Bholagonj shingles, erecting and placing necessary plants and equipments, placing reinforcement case, provide required quantities of Bentonite, tools and tackles etc.

The concrete strength must obtain cylinder-crushing strength of 21 MPa (3000 Psi) at 28 days, which shall be determined from the materials at site by trial mix and sample test. Actual length of service piles shall be determined and finalized after obtaining the Load test result on test piles and if higher length of piles is required to be executed, no enhancement of rates shall be entertained. Being the land is undulated and marshy to some extent all necessary measures for execution of piles such as filling and leveling of piling area with requisite compaction for moving the winch, machines and rigs and making the area workable for setting pile layout and execution of pilling work shall have to be taken at the own cost of Contractor and all the cost that shall be incurred against above mentioned items shall be; inclusive of the quoted rates. The work will complete as per direction of Engineer-in-charge. Two hundred

Ten only

The unit rate of pile is exclusive of cost of steel reinforcement and its fabrication). I he payment shall be made for the length from TIP to cut-off level in the drawing. No payment shall be made for extra boring from existing ground level to top level files. completed as per direction of Engineer-in-charge.

BORING /DRILLING IN RCC PILE

Boring/drilling for cast in situ pile up to the required depth and diameter with minimum 6 m long temporary steel casting, true to vertical, providing bentonite slurry and maintaining water level in the hole, washing the hole for at least 30 8 minutes, clean the bore-hole and make the bore-hole ready for placing steel cage and concreting including hire charge of rig set with winch machine, tripod stand, trimle pipe, cost of fuel, lubricant, mobilization, demobilization, maintenance, spares, stand-byes, insurance coverage, water, electricity & other charges all complete as per direction of the Engineer-in-charge.i) 450 mm dia

Taka one hundred thirty

only

Supplying, fabrication and fixing to details as per design deformed bar reinforcement in concrete in accordance with BSTI standard in/c straightening and cleaning rust, if any, bending & binding in position in/c supply of G.I. wires etc. complete in all respects in all floors. The work complete as per direction of Engineer-in- charge.

Taka Sixty



60 Grade deformed bar with minumum fy=415Mpa ultimate strength 620 Mpa 12.00 Ton 60,000.00 720,000.00 1,757,000.00

WORK UPTO GRADE BEAM3 PILE HEAD BREAKING

300 cft 130.00 39,000.00

4 EARTHWORK

Excavation up to 1.50m depth and 60m lead including cheaking levels and stacking the earth. 6000 cft 3.00 Taka Three only 18,000.00

5 DEWATERING FOR BASEMENT EXCAVATION

1 L.S 10,000 10,000.00

6 BRICK FLAT SOLING

Taka Sixty thousand only

Labour for breaking head of hardened cast in situ bored pile/pre-cast pile up to a required length by any means but without damaging the rest and removing the dismantled materials such as concrete to a safe distance including scraps and cleaning concrete from steel/M.S. rods, straightening & bending of pile bars, preparation and making platform where necessary, carrying, all sorts of handling, stacking the same properly after clearing, leveling and dressing the situ and clearing the bed etc. complete as per direction of the Engineer-in-charge. (Measurement will be given for the actual pile head volume to be broken)

Taka one hundred thirty

only

Earthwork in excavation in all kinds of soil for foundation trenches in/c. layout, providing center lines, bench-mark pillars, leveling, ramming and preparing the base, fixing bamboo spikes & giving layout with chalk powder, providing necessary tools and plants, protecting and maintaining the trench dry etc., stacking the excavated earth at a safe distance of up to 60 m lead, removing the spools etc. all complete as per direction of Engineering-in-charge (rate is excluding the cost of bench mark pillars).

Arrangement of designed dewatering system for deep excavation at site shall be made by the contractor to keep the base level of Basement dry and workable and to keep watertable at least 1 metre below base level of excavation by sinking required number of wells with pumps, IC1ying perforated strainer pipe horizontally to collect surface and seepage water to a selected drainage line and to discharge the same to a selected drainage system. To serve the purpose of dewatering, the contractor has to design and develop the deep dewatering and drainage system at his own cost At the time of designing and installing the system, the contractor will have to encounter the danger that may arise out of the system works to adjoining buildings and necessary measures to protect gradual sliding and horizontal movement of earth from underneath the foundation of existing adjacent building shall be taken by the contractor. Any unexpected failure of foundation of adjoining building caused due to dewatering and excavation shall fully be protected by the Contractor at his own responsibility, arrangement and at their own cost.

If in any way failure occurs, Contractor will be fully held responsible for such failures and the damages to be made good and any compensation arisen out of such failure shall be borne by the Contractor.

Taka Ten thousand only



300 sft 25.00 7,500.00

7 CEMENT CONCRETE

100.00 cft 160.00 16,000.00

9 RCC WORK UPTO GB

Upto Grade Beam 3,000.00 cft 260.00 780,000.00 3 REINFORCEMENT Upto GB

60 Grade deformed bar with minumum fy=415Mpa ultimate strength 620 Mpa 7.50 Ton 60,000.00 450,000.00 1,320,500.00

WORK UPTO GROUND FLOOR ROOF6 BRICK FLAT SOLING

3,000.00 sft 25.00 75,000.00

Single brick flat soling including preparation of bed, sand filling (FM>=0.50), 10 leveling, dressing and sand blinding in foundation or floor with supply of all materials etc. complete as per direction of Engineer-in-charge.

Taka Twenty Five only

Cement concrete work in leanest mix. 1:3:6 with sand of FM>=1.5, in foundation or floor including breaking, screening, grading and washing aggregates with clear water, mixing, laying in position, consolidation to levels, curing, including supply of all materials, excluding the cost of formworks etc. complete as per direction of Engineering-in-charge

Taka One hundred Sixty

only

Reinforced cement concrete works of specified minimum-compressive strength fc = 21 Mpa (3000 Psi) for concrete at 28 days on standard cylinder, with Portland cement conforming to BDS 232 & ASTM Standard, best quality coarse sand [Sylhet sand F.M. 2.5 to 2.8], 20 mm down well graded Bholaganj shinglesof proportion which actually is to be determined by trial mix from approved materials including breaking chips and screening through proper sieves, making, placing in position the centering shuttering, making water-tight steel shuttering, placing of reinforcement in position; concrete mixing in Batching Plant. casting in forms. compacting by vibrator machine and curing at least for 28 days, removing centering, shuttering, all complete including cost of water, electricity, testing of materials and concrete & other charges as per direction of the Engineer-in-charge.

Concrete shall be produced including necessary admixture: plasticizer, retarder etc. in the Batching Plant and shall be transported to site by Transit Mixture Truck and placing shall done by Concrete Pumps at site. The minimum cement content shall be 450 kg per cum of concrete. Rate is excluding the cost of reinforcement and its fabrication. But shall be inclusive of all cost of production of concrete including necessary admixture : plasticizer, retarder etc. in the Batching Plant, and Transportation of Concrete upto site and pouring of Concrete by Pump at site



Single brick flat soling including preparation of bed, sand filling (FM>=0.50), 10 leveling, dressing and sand blinding in foundation or floor with supply of all materials etc. complete as per direction of Engineer-in-charge.



in figure in word in Taka 1 2 3 4 5 6 77 CEMENT CONCRETE

1,000.00 cft 160.00 160,000.00

8 DAMP PROOF MEMBRANE

3000 sft 4.00 Taka Four only 12,000.00

10 RCC WORK

2500 cft 270.00 675,000.00 REINFORCEMENT IN RCC

11

12 60 Grade deformed bar with minumum fy=415Mpa ultimate strength 620 Mpa 10.00 Ton 60,000.00 600,000.00

13 SAND FILLING

Cement concrete work in leanest mix. 1:3:6 with sand of FM>=1.5, in foundation or floor including breaking, screening, grading and washing aggregates with clear water, mixing, laying in position, consolidation to levels, curing, including supply of all materials, excluding the cost of formworks etc. complete as per direction of Engineering-in-charge

Taka One hundred Sixty

only

Damp proof polythene membrane under cement concrete flooring in ground floor providing 500 micron gauge polythene sheet laying including 150 mm over lapping in joints and covering the vertical surfaces and to the surfaces of contact , with the concrete etc. complete as per direction of Engineering-in-charge. all works complete.

Reinforced cement concrete works of specified minimum-compressive strength fc = 21 Mpa (3000 Psi) for concrete at 28 days on standard cylinder, with Portland cement conforming to BDS 232 & ASTM Standard, best quality coarse sand [Sylhet sand F.M. 2.5 to 2.8], 20 mm down well graded Bholaganj crushed stone chips of proportion which actually is to be determined by trial mix from approved materials including breaking chips and screening through proper sieves, making, placing in position the centering shuttering. M.S. sheet, steel forms. 40 mm M.S. pipes, 50 x 40 mm adjustable pipes (jug pipes) with 150 x 150 x 6 mm base plate having pipe wall thickness 2.5 to 4.5 mm as props, making water-tight steel shuttering, placing of reinforcement in position; concrete mixing in Batching Plant. casting in forms. compacting by vibrator machine and curing at least for 28 days, removing centering, shuttering, all complete including cost of water, electricity, testing of materials and concrete & other charges as per direction of the Engineer-in-charge.


Taka Two hundred Seventy only



Sand filling in foundation trenches and plinth with coarse sand having min. F.M.1.20 in 150mm layers including leveling, watering and consolidating each layer



10000 cft 18.00 180,000.00

14 PATENT STONE WORK

1200 cft 250.00 300,000.00

15 NCF WORK9000 sft 30.00 Taka Thirty only 270,000.00

15 BRICK WORK

600 cft 220.00 132,000.00

16 PLASTERING WORKS 16.1 PLASTER TO CONCRETE SURFACE

5,000.00 sft 25.00 125,000.00

16.2 PLASTER TO BRICK WALL SURFACE

1200 sft 27.00 32,400.00

17 PAINTING WORKS17.1

5000 sft 9.00 Taka Nine only 45,000.00

1.20 in 150mm layers including leveling, watering and consolidating each layerup to finished level (to be used when required as per design supplied by thedesign office only) etc. all complete as per direction of the Engineer-in-Charge.

Taka Eighteen only

Patent stone work in leanest mix. 1:2:4 with sand of FM>=1.5, in floor including breaking, screening, grading and washing aggregates with clear water, mixing, laying in position, consolidation to levels, curing, including supply of all materials etc. complete as per direction of Engineering-in-charge

Taka Two hunded Fifty only

NCF work in floor including mixing, laying in position, consolidation to levels, curing, including supply of all materials etc. complete as per direction of Engineering-in-charge

250 mm brick work with 1st class bricks in cement sand (F.M.1.2) mortar (1:4) and making bond with connected walls in/c necessary scaffolding, raking out joints, cleaning and soaking the bricks for at least 24 hours before use and washing of sand curing at least for 7 days in all floors including cost of water, electricity & other charges etc. all complete as per. direction of the Engineer-in-charge.

Taka Fifty Five only

Minimum 6 mm thick cement sand (F.M. 1.2) plaster (1:4) with fresh cement (conforming to BDS 232) to ceiling R.C.C. columns, beams, surface of stair case, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and edges in/c washing of sand cleaning the surface, scaffolding and curing at least for 7 days, cost of water, electricity & other charges etc. all complete in all respect as per drawing and direction of the Engineer-in-charge.


Minimum 12 mm thick cement sand (F .M. 1.2) plaster (1 :6) with fresh cement (conforming to BDS 232) to ceiling R.C.C. columns, beams, surface of stair se, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and edges in/c washing of sand cleaning the surface, scaffolding and 11778 . ring at least for 7 days, cost of water, electricity & other charges etc. all complete in all respect as per drawing and direction of the Engineer-in-charge.

Taka Twenty Seven only

Plastic emulsion paint of approved best quality and colour delivered from authorized local agent of the manufacturer in a sealed container, applying to wall and ceiling in two coats over a coat of brand specified primer or sealer elapsing specified time for drying/recoating including cleaning drying, making free from dirt, grease, was, removing all chalked & sealed materials, fungus, mending good the surface defects, sand papering the surface and necessary scaffolding, spreading by brush/roller/spray etc. all complete in all floor as per direction of the Engineer-in-charge



17.3

500.00 sft 11.00 5,500.00 18 STAIR RAILING

60 sft 300.00 18,000.00

2,629,900.00

WORK UPTO 1st FLOOR ROOF10 RCC WORK


11

Two costs of weather coat of approved quality colour and origin over a coat of plastron sealer to exterior plastered surface necessary scaffolding and surface cleaning etc. all complete in all floors complele as per direction of the Engineer-in-charge. Taka Eleven

only

900 mm high M.S.pipe railing in stairs including manufacturing and fixing in position as per drawings, providing 62mm dia MS pipe hand rest and 38 mm verticals @ ± 1'-8" C/C and 4 nos horizontal of 25mm dia MS pipe joining the verticals. The total railing framing shall be manufactured by proper welding, the end of all verticals shall be embedded 75mm into the concrete. welding and grinding of all joints shall be connected, grinded properly, polishing the pipes after finishing etc. all works complete as per direction of Engineer-in-charge payment will be made only for clear height after finishing the stair.

Taka Three Hundred only





Taka Sixty





1200 cft 250.00 300,000.00


15 BRICK WORK

4,000.00 sft 110.00 440,000.00


5,000.00 sft 25.00 125,000.00


9,000.00 sft 27.00 243,000.00



17.2












Painting to door and window frames and shutters in two coats with approved best quality and colour of synthetic enamel paint delivered from authorized local agent of the manufacturer in a sealed container, having highly water resistant, high bondibilty, flexible, using specific brand thinner applied by rass/roller/spray over a coat or priming elapsing time for drying including surface cleaning from dust, oil or dirt, smoothening, finishing and polishing with sand paper and necessary tools, scaffolding, testing charges etc. all complete in all floors. The work complete as per direction of the Engineering-in-charge.



2000 sft 10.00 Taka Ten only 20,000.00

17.3

2,500.00 sft 11.00 27,500.00 18 STAIR RAILING

60 sft 300.00 18,000.00

19 DOOR FRAME WORKS

13 nos 3,000.00 39,000.00

20 WOODEN DOOR SHUTTER

150 sft 360.00 54,000.00

21 STEEL DOOR

110 sft 250.00 27,500.00

22 ALLUMINIUM SLIDING WINDOW



only



Supplying and making door and window frames (Chowkat) for all floors with matured natural seasoned wood of required size including painting two coats of coal tar to the surface in contact with wall, fitting and fixing in position as per direction of the Engineer-in-charge

Taka Three thousand only

Supplying, fitting and fixing 38 mm thick well matured, seasoned (min 10" wide plank) solid wood single leaf door shutter having top rail style of sections 100 mm X 38 mm, lock rail 125 X 38 mm and bottom rail 225 X 38 mm. Closed joints with 25 mm x 12 mm size wooden peg and provided with best quality 4 Nos. 100 mm iron hinges 2 (two) Nos. best quality 12 mm dia 300 mm and 200 mm long iron tower and socket bolts, 2 (two) Nos. heavy type nickel plated handle, hinged cleats, buffer blocks and finished by sand papering etc. in all floors as per direction of the Engineer-in-charge (All sizes of wood are finished).

Taka Three hundred Sixty

only

Steel door of any design in Penth House or wherever required made of mild steel structural sections including 18 SWG M.S. sheet shutter, fabricating, welding, fitting, fixing, painting with 3 coats of synthetic enamel paint over a coat of anti-corrosive primer including supply and carriage of all materials, labour, tools, plants, etc. complete as per drawing, decision and instruction of the Engineer-in-charge in all floors.

Taka Two hundred Fifty

only

Supplying, fitting and fixing of Aluminium sliding window as per standard specification having 1.5 mm thick outer bottom (size 75.50 mm, 32 mm), 1.5 mm thick outer top (size 75.50 mm, 16.80 mm), 1.5 mm thick shutter top (size 33 mm. 26.80, 22 mm), 1 ,5 mm thick shutter bottom (size 60 mm, 2.440 mm), 1.5 mm thick outer side (size 31 mm, 26 mm), 1.5 mm thick shutter lock (size 49.20 mm26.20 mm) & 1.5 mm 7 thick inter lock (size 34.40 mm, 32.10 mm ) sections all Aluminium members (Total weight kg!sqm) will be anodized to Aluminium Bronze/Silver color with a coat not less than 15 micron in thickness and density of 4 mg per square cm etc. including all accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door neoprene, bolts & nuts in!c sealants, keeping provision for fitting of ;; accessories, making grooves & ending good damages, carriage, and electricity. complete in all respect as per drawing and direction of the Engineer-in-charge.



500 SFT 250.00 125,000.00

23 M.S WINDOW GRILL

500 sft 80.00 40,000.00

3,008,500.00

WORK UPTO 2nd FLOOR ROOF10 RCC WORK



only

Supplying, fitting and fixing window grills made of 16 mm dia M.S. rod @ 100 mm c/c fitted with 3(three) Nos. horizontal M.S. flat bar (38x6mm) including fabrication, welding, riveting, cost of electricity, workshop charges, carriage, fixing with pre-placed clamps in walls/RCC member for all floors etc. complete as per direction of Engineer-in-charge. (total weight per sqm should be approx. 22.8 kg & add or deduct @ Tk. .04 for each kg excess or less respectively).

Taka Eighty only







11



1200 cft 250.00 300,000.00


15 BRICK WORK

4,000.00 sft 110.00 440,000.00


5,000.00 sft 25.00 125,000.00


9,000.00 sft 27.00 243,000.00


















17.2

2000 sft 10.00 Taka Ten only 20,000.00

17.3

2,500.00 sft 11.00 27,500.00 18 STAIR RAILING

60 sft 300.00 18,000.00

19 DOOR FRAME WORKS

13 nos 3,000.00 39,000.00

20 WOODEN DOOR SHUTTER

150 sft 360.00 54,000.00

21 STEEL DOOR



Two costs of weather coat of approved quality colour and origin over a coat of plastron sealer to exterior plastered surface necessary scaffolding and surface cleaning etc. all complete in all floors complele as per direction of the Engineer-in-charge.

Taka Eleven only



Supplying and making door and window frames (Chowkat) for all floors with matured natural seasoned wood of required size including painting two coats of coal tar to the surface in contact with wall, fitting and fixing in position as per direction of the Engineer-in-charge


Supplying, fitting and fixing 38 mm thick well matured, seasoned (min 10" wide plank) solid wood single leaf door shutter having top rail style of sections 100 mm X 38 mm, lock rail 125 X 38 mm and bottom rail 225 X 38 mm. Closed joints with 25 mm x 12 mm size wooden peg and provided with best quality 4 Nos. 100 mm iron hinges 2 (two) Nos. best quality 12 mm dia 300 mm and 200 mm long iron tower and socket bolts, 2 (two) Nos. heavy type nickel plated handle, hinged cleats, buffer blocks and finished by sand papering etc. in all floors as per direction of the Engineer-in-charge (All sizes of wood are finished).

Taka Three hundred Sixty

only

Steel door of any design in Penth House or wherever required made of mild steel structural sections including 18 SWG M.S. sheet shutter, fabricating, welding, fitting, fixing, painting with 3 coats of synthetic enamel paint over a coat of anti-corrosive primer


only



110 sft 250.00 27,500.00

22 ALLUMINIUM SLIDING WINDOW

500 SFT 250.00 125,000.00

23 M.S WINDOW GRILL

500 sft 80.00 40,000.00

3,008,500.00

ROOF TOP WORK10 RCC WORK

fixing, painting with 3 coats of synthetic enamel paint over a coat of anti-corrosive primer including supply and carriage of all materials, labour, tools, plants, etc. complete as per drawing, decision and instruction of the Engineer-in-charge in all floors.


only



only

Supplying, fitting and fixing window grills made of 16 mm dia M.S. rod @ 100 mm c/c fitted with 3(three) Nos. horizontal M.S. flat bar (38x6mm) including fabrication, welding, riveting, cost of electricity, workshop charges, carriage, fixing with pre-placed clamps in walls/RCC member for all floors etc. complete as per direction of Engineer-in-charge. (total weight per sqm should be approx. 22.8 kg & add or deduct @ Tk. .04 for each kg excess or less respectively).

Taka Eighty only


Concrete shall be produced including necessary admixture: plasticizer, retarder etc. in the Batching Plant and shall be transported to site by Transit Mixture Truck and placing shall done by Concrete Pumps at site. The minimum cement content shall be 400 kg per cum



500.00 cft 270.00 135,000.00 REINFORCEMENT IN RCC

11


15 LCC WORK2500 sft 40.00 Taka Forty only 100,000.00

15 BRICK WORK

600 sft 110.00 66,000.00


5000 sft 25.00 125,000.00


1200 sft 27.00 32,400.00


done by Concrete Pumps at site. The minimum cement content shall be 400 kg per cum of concrete. Rate is excluding the cost of reinforcement and its fabrication. But shall be inclusive of all cost of production of concrete including necessary admixture : plasticizer, retarder etc. in the Batching Plant, and Transportation of Concrete upto site and pouring of Concrete by Pump at site




LCC work in floor including mixing, laying in position, consolidation to levels, curing, including supply of all materials etc. complete as per direction of Engineering-in-charge











17.2

800 sft 10.00 Taka Ten only 8,000.00

17.3

500.00 sft 11.00 5,500.00 21 STEEL DOOR

50 sft 250.00 12,500.00

667,400.00

25 SITE CLEANING

1 L.S 50,000 50,000.00




only

Steel door of any design in Penth House or wherever required made of mild steel structural sections including 18 SWG M.S. sheet shutter, fabricating, welding, fitting, fixing, painting with 3 coats of synthetic enamel paint over a coat of anti-corrosive primer including supply and carriage of all materials, labour, tools, plants, etc. complete as per drawing, decision and instruction of the Engineer-in-charge in all floors.


only

Cleaning the work site after completion of works and demobilization of contractor's men, materials, equivalent etc. including washing and clearing of floors, sote and touch up work required before work handover of the building/project complete as per direction of the Engineer-in-charge.

Taka Fifty thousand only

2500+2600+2600+500

10+11+11+2

8800

16000

24000

28000

12000

150

SECTIOPN - 6 : BILL OF QUANTITIES

PART- B2 : SANITARY, WATER SUPPLY & PLUMBING WORKS SL Rate in Figure and Works NO. Description of Item Quantity Unit (To be Quoted) Quoted Amount


1.0 UPVC PIPE AND PIPE FITTINGS

1.1 UPVC PIPE

a) 300 mm dia 300 Rm 2,400.00 720,000.00

b) 250 mm dia 350 Rm 1,825.00 638,750.00

c) 200 mm dia 500 Rm 975.00 487,500.00

d) 150 mm dia 800 Rm 550.00 440,000.00

e) 100 mm dia 1000 Rm 300.00 300,000.00

f) 80 mm dia 50 Rm 200.00 10,000.00

g) 50 mm dia 200 Rm 110.00 22,000.00

h) 40 mm dia 150 Rm 85.00 12,750.00

Supply, fitting and fixing of Extra heavy uPVC pipe shall be made uPVC as per BS4514/18044221 88213 standard. Pipe shall be bell end socket type. Approved type of solvent cement/sealant shall be used to install pipe and jointing the pipe with pipe fittings. Joint shall be watertight. In brick wall pipe shall be surrounded by concrete in 1: 3.5: 5.5 and shall be clamped to wall properly at an interval of not more than 1200 mm. Pipe laying shall have the following gradient unless otherwise specified. Nominal dia of pipe with thickness shall be as follows. The pipes shall be Hf (HAN f ING) National Polymer industries from Bangladesh and pipe fitting shall be imported from Singapore.

Supply, fitting, fixing of bell and spigot type extra heavy uPVC pipe as per direction and drawing. The pipes shall be H4> (HAN 4> ING) National Polymer industries from Bangladesh

Taka two thousand four hundred only

Taka One thousand eight hundred

twenty five only

Taka Nine hundred seventy

five only

Taka Five hundred fifty only

Taka three hundred only

Taka two hundred only

Taka One hundred ten only

Taka eighty five only



1.2 UPVC T - JOINT

a) 200 mm x 200 mm x 150 mm dia 10 each 4,540.00 45,400.00

b) 150 mm x 150 mm x 150 mm dia 20 Each 1,590.00 31,800.00

c) 150 mm x 150 mm x 100 mm dia 60 Each 1,750.00 105,000.00

d) 100 mm x 100 mm x 100 mm dia 150 Each 550.00 82,500.00

e) 100 mm x 100 mm x 100 mm x 100 mm dia 10 Each 950.00 9,500.00

f) 100 mm x 100 mm x 80 mm dia 2 Each 550.00 1,100.00

g) 100 mm x 100 mm x 50 mm dia 50 Each 550.00 27,500.00

1.3 UPVC Y - JOINT Supply, fitting, fixing of extra heavy UPVC standard Y joint, as per direction & drawing.

a) 150 mm x 150 mm x 150 mm dia 10 each 1,870.00 18,700.00

b) 150 mm x 150 mm x 100 mm dia 50 Each 1,370.00 68,500.00

c) 100 mm x 100 mm x 100 mm dia 10 Each 1,000.00 10,000.00

Supply, fitting, fixing of extra heavy UPVC standard Door AT-joint, as per direct drawing. All pipe fitting shall be imported from Singapore.

Taka Four thousand five hundred forty

only

Taka One thousand five

hundred ninety only

Taka One thousand seven

hundred fifty only


Taka nine hundred fifty only



Taka One thousand eight hundred seventy only

Taka One thousand three hundred seventy only

Taka One thousand only



d) 100 mm x 100 mm x 100 mm x 100 mm dia 2 Each 1,200.00 2,400.00

1.4 UPVC - TRAP a) P - TRAP

142 Each 700 99,400.00

b) S - TRAP

5 Each 660 3,300.00 1.5 UPVC BEND

a) Bend 200 mm dia 10 each 2,870.00 28,700.00

b) Long Bend 150 mm dia 50 each 920.00 46,000.00

c) Short Bend 150 mm dia 20 each 800.00 16,000.00

d) Short Bend 100 mm dia 150 each 350.00 52,500.00

e) Short Bend 100 mm dia 50 each 270.00 13,500.00

f) Long Bend 80 mm dia 10 each 260.00 2,600.00

f) Long Bend 50 mm dia 120 each 220.00 26,400.00

1.6 UPVC LOOSE SOCKET Supply, fitting, fixing of UPVC Loose Socket as per Drawing and Direction .a) 150 mm Dia 50 each 430.00 21,500.00

b) 100 mm dia 20 each 150.00 3,000.00

Taka One thousand two hundred only

Supply, fitting, fixing of 100 mm dia UPVC trap Syphon trap of P-trap including making holes in wall of floor and mending good the damage upto the satisfaction.

Taka seven hundred only

Supply, fitting, fixing of 100 mm dia UPVC trap Syphon trap of S-trap including making holes in wall of floor and mending good the damage upto the satisfaction. Taka six hundred

sixty only Supply, fitting, fixing of 100 mm dia UPVC Deep Bend / Normal Bend including making holes in wall of floor and mending good the damage upto the satisfaction.

Taka Two thousand eight hundred seventy only

Taka nine hundred twenty only

Taka Eight hundred only

Taka Three hundred fifty only

Taka Two hundred seventy only

Taka Two hundred sixty only

Taka Two hundred twenty only

Taka Four hundred thirty only

Taka One hundred fifty only



1.7 UPVC OFFSET BENDSupply, fitting, fixing of 100mm dia UPVC Offset Band as per Drawing and Direction .

a) 200 mm Dia 2 each 4,300.00 8,600.00

b) 150 mm dia 15 each 1,070.00 16,050.00

c) 100 mm dia 15 each 500.00 7,500.00

1.8 UPVC VENT Cowl Supply, fitting, fixing of UPVC Vent Cowl as per Drawing and Direction .a) 150 mm Dia 20 each 360.00 7,200.00

b) 100 mm dia 10 each 130.00 1,300.00

1.9 UPVC Clean Out Cup / service Door Supply, fitting, fixing of UPVC End cup as per drawing and directiona) 150 mm Dia 10 each 800.00 8,000.00

b) 100 mm dia 20 each 400.00 8,000.00

2.0 G.I. PIPE

a) 100 mm dia 200 Rm 2,500.00 500,000.00

Taka Four thousand three hundred only

Taka One thousand seventy

only

Taka Five hundred only

Taka Three hundred sixty only

Taka One hundred thirty

only


Taka Four hundred only

Supply, fitting, fixing of GI pipe of National Tube Product. Pipe work shall be complete with bends, tees, elbows, socket, union, reducers, hanger, bracket, clamp etc. receptively complete as per drawing and direction of the Engineer-in- charge. Approved type of sealant shall be used. Pipe work shall be suitable towithstand a hydraulic pressure test of 100 psig and 48 hours 80 psig stand pressure all GI pipe layout area. All GI materials used in pipe work shall be painted with two coats of read oxide prime cote of approved quality.

Taka Two thousand five hundred only



b) 80 mm dia 200 Rm 1,620.00 324,000.00

c) 65 mm dia 100 Rm 1,620.00 162,000.00

d) 50 mm dia 200 Rm 890.00 178,000.00

e) 40 mm dia 150 Rm 650.00 97,500.00

f) 32 mm dia 50 Rm 650.00 32,500.00

g) 25 mm dia 200 Rm 480.00 96,000.00

h) 20 mm dia 150 Rm 325.00 48,750.00

i) 13 mm dia 2000 Rm 270.00 540,000.00

3.0 COPPER PIPE

a) 20 mm dia 50 Rm 1,000.00 50,000.00

b) 13 mm dia 50 Rm 950.00 47,500.00

4.0 TOILET FITTINGS & FIXTURES

4.1 STOP COCK


Taka One thousand six hundred twenty

only

Taka One thousand six hundred twenty

only

Taka Eight hundred ninety only

Taka Six hundred fity only

Taka Six hundred fity only

Taka Four hundred eighty only

Taka Three hundred twenty five

only Taka Two hundred

seventy only

Supply, fitting, fixing of Copper pipe work shall be complete with bends, tees, elbows, socket, union, reducers, hanger, bracket, clamp etc. receptively complete as per drawing and direction of the Engineer-in-charge. Approved type of sealant shall be used. Pipe work shall be suitable to withstand a hydraulic pressure test of 100 psig and 48 hours 80 psig stand pressure all pipe layout area. All cupper pipe hot water supply used in the pipe. Hot water pipe including 40mm or 25mm insulation cover work shall be of approved quality.

Taka One thousand only

Taka Nine hundred fity only

Supply, fitting and fixing Bathroom fittings in toilets including carrying up the fixtures to different parts of the building all respectively complete as per drawing and direction of the Engineer-in-charge.

Supply, fitting and fixing CP Stop Cock of dia 13 mm with brass rising stem screwed bonnet, screwed end type. Stop cock shall be capable to withstand a pressure of 344 kPa. and sha location shown in the drawing and as per direction of Engineer-in-charge. Product shall be Made B Model American Standard, Thailand or equivalent of COTTO, Thailand.



28 Each 800.00 22,400.00

4.2 ANGLE STOP COCK

220 Each 510.00 112,200.00

4.3 WC Shower Rose (Push shower)

80 Each 570.00 45,600.00

4.4 OPEN TAP / BIB COCK

80 Each 630.00 50,400.00

4.5 BASIN PILLAR COCK

85 Each 570.00 48,450.00

4.6 BASIN MIXTURE

Supply, fitting and fixing CP Stop Cock of dia 13 mm with brass rising stem screwed bonnet, screwed end type. Stop cock shall be capable to withstand a pressure of 344 kPa. and sha location shown in the drawing and as per direction of Engineer-in-charge. Product shall be Made B Model American Standard, Thailand or equivalent of COTTO, Thailand.


Supply, fitting and fixing of CP oval type Angle Stop Cock of dia 13 mm with bracing screwed bonnet, solid wedge and screwed end type. Angle Stop cock shall be suitable a pressure of 344 KPa. and shall be installed at location shown in the drawing and c of the Engineer-in-charge. Product shall be Model No.A-4400 of American standard equivalent Model of COTTO, Thailand.

Taka Five hundred ten only

Supply, fitting, fixing WC Shower Rose with stem screwed bonnet, disc and screwed end type. WC Shower Rose shall be installed at location shown in the drawing and as per direction of Engineer-in-charge. Threaded joint shall be made properly sealed. Product shall be Model No. A-4800 of American Standard,Thailand or equivalent model of COTTO, Thailand.

Taka Five hundred seventy

only

Supply, fitting and fixing of 13 mm dia CP Open Tap shall be constructed with bronze and shall have rising stem screwed bonnet, disc. and screwed end type and and shall be suitable to withstand a pressure of 344 kPa. Open taps/Bip cocks shall be installed at location shown in the drawing and as per direction of the engineer-in-charge. Threaded joint shall be made properly sealed. Product shall be Model No. A-4100-980-593 of American standard, Thailand or equivalent model of COTTO, Thailand

Taka Six hundred thirty

only

Supply, fitting and fixing of 13 mm dia CP Medal Headed Heavy deluxe body Basin Pillar Cock shall be constructed with brass rising stem screwed bonnet, solid wedge and screwed end type and shall be suitable to withstand a pressure of 344 KPa. Pill cock shall be installed at location shown in the drawing and as per direction of the Engineer-in-charge. Product shall be Model No.A-4000-980-584 of American standard, Thailand or equivalent model of COTTO, Thailand.

Taka Five hundred seventy

only

Supply, fitting fixing of 13 mm dia CP Basin Mixture shall be constructed with brass rising stem screwed bonnet, solid wedge and screwed end type. Valves shall be capable to withstand a pressure of 344 KPa. Basin mixture shall be installed at location shown in the drawing and as per direction of the Engineer-in-charge. Product shall be model no A-1900-976-100B of American Standard Thailand or 1211.101.50 American Standard Thailand or equivalent model of COTTO, Thailand.



28 Set 1,860.00 52,080.00

4.7 SINK COCK

10 Each 1,380.00 13,800.00

4.8 BOTTLE TRAP

130 Each 780.00 101,400.00

4.9 WASHING HAND BASIN

85 Each 2500 212,500.00

28 Each 3000 84,000.00

4.10 SINK (SINGLE BOWL)

Supply, fitting fixing of 13 mm dia CP Basin Mixture shall be constructed with brass rising stem screwed bonnet, solid wedge and screwed end type. Valves shall be capable to withstand a pressure of 344 KPa. Basin mixture shall be installed at location shown in the drawing and as per direction of the Engineer-in-charge. Product shall be model no A-1900-976-100B of American Standard Thailand or 1211.101.50 American Standard Thailand or equivalent model of COTTO, Thailand.

Taka One thousand eight

hundred sixty only

Supply, fitting and fixing of 13 mm dia CP Sink Cock shall be constructed with brass rising stem (Nozzle type), solid wedge and screwed end type. Valves shall be capable to withstand a pressure of 344 kPa. Sink cock shall be installed at location shown in the drawing and as per direction of the Engineer-in-charge. Product shall be Model No. A-4050.980-590 of American Standard, Thailand or equivalent model of COTTO, Thailand

Taka One thousand threet hundred eighty

only

Supply, fitting and fixing of CP Bottle Trap shall be constructed with bronze and shall have 32 mm dia inlet and outlet steel pipe connector complete with adjusting sockets, washer etc. The Trap shall have bottom opening screwed end type cleaning arrangement. Bottle Trap shall be installed at location shown in the drawing and as per direction of the Engineer-in-charge. Threaded joint shall be made properly seated. Product shall be Model No. A-8102 of American Standard, Thailand) or equivalent model of COTTO. Thailand.

Taka seven hundred eighty

only

Supply. fitting and fixing of super vitreous washing hand basin super and fitting fixing the same in position with heavy type CI wall brackets, 32 mm dia CP basin waste, including making holes in walls and fitting with CI wall brackets and mending good the damages etc. complete as per direction of the Engineer-in-charge.

a) Product shall be Model No. basin TF-956 with Pedestal Model-900P American Standard, Thailand or equivalent model of COTTO, Thailand.


b) Product shall be Model No. Basin TF-0409 / 0076 of American standard,Thailand or equivalent model of COTTO, Thailand


Supply, fitting and fixing of super quality Stainless Steel Sink in position shown in the drawing with heavy of 3 '-6" x 1'-8" size type CI wall brackets, 32 mm dia CP basin



10 Each 3,100.00 31,000.00

4.11 FLEXIBLE CONNECTION

220 Each 150.00 Taka one 33,000.00 hundred fifty only

4.12 Commode (Combi)

Taka nine thousand eight

55 Set 9800 hundred only 539,000.00

Taka Eleven 28 Set 11,200.00 thousand two 313,600.00

hundred only

4.13 SQUAT (LONG PAN)

Taka Two 2 Set 2,200.00 thousand two 4,400.00

hundred only

4.14 URINAL

drawing with heavy of 3 '-6" x 1'-8" size type CI wall brackets, 32 mm dia CP basin waste, including making holes in wall and fitting with CI wall brackets and mendin good the damages etc, complete as per direction of the Engineer-in-charge. Produc shall be of 'TEKA' Brand of Spain or equivalent foreign Brand.

Taka Three thousand one hundred only

Supply, fitting and fixing of flexible connecting pipe of 13 mm dia and 460 mm length shall be complete with SS flare nut and socket on both end to adapt 13 mm dia threaded G.I Pipe. Product shall be Model No. A-110333 of American Standard, Thailand or equivalent model of COTTO, Thailand.

Supply, fitting and fixing porcelain commode 'P' or'S' type trap, with ebonite (heavy type) socket etc. preparing the base with cement concrete and wire net or rod if necessary in all floors including making holes wherever required and mending good the damages, fitting, fixing with all necessary fittings and connection as per direction of the Engineer-in-charge. Commode shall be complete with 12 Liter capacity wall mounted Cistern and auto flashing system (Push Type).

a) Commode with seat cover including all internal fittings. The product shall beModel no. TF-2177 of American Standard, Thailand of equivalent model ofCOTTO, Thailand

b) Commode with seat cover include all internal fittings. The product shall beModel no. TF-2175 of American Standard, Thailand or equivalent of COTTOThailand.

Supply, fitting and fixing of Orissya type Squatting pan Model TF-100FPfT of American Standard, Thailand or equivalent COTTO, Thailand with foot rest and preparing the base of pan in cement concrete wire net or roads if necessary in all floors where necessary and mending good the damages, complete with tank as per drawing and direction of the Engineer-in-charge. The product shall be Model No. TF-100FPfT of American Standard, Thailand or equivalent Model of COTTO, Thailand

Supply, fitting and fixing of supper vitreous porcelain standing urinal with heavy type CI wall bracket 32 mm dia CP waste pipe wherever required in/c making hole in wall and



Taka one thousand nine

33 set 1,950.00 hundred fifty only 64,350.00

b) Sqyating Urinal Locally made best quality Taka one thousand five

10 set 1,560.00 hundred sixty only 15,600.00 4.15 AUTOMATIC URINAL FLASH

Taka Two 33 Set 2,800.00 Thousand eight 92,400.00

hundred only

4.16 SHOWER ASSEMBLY

taka Nine 28 Set 950.00 hundred fifty only 26,600.00

4.17 SHOWER TRAY Taka six

28 Set 6,500.00 thousand five 182,000.00 hundred only

4.18 GLASS MIRROR

Taka one 28 Each 1,930.00 thousand nine 54,040.00

hundred thirtyonly

Taka One 85 Each 1,560.00 thousand five 132,600.00

hundred sixty only4.19 TOWEL BAR AND RACK

wall bracket 32 mm dia CP waste pipe wherever required in/c making hole in wall and fitting with CI wall bracket and mending good the damages etc. all complete as per drawing and direction of the Engineer-in-charge.

a) Standing Urinal Model No- TF 6789 tanding Urinal of American Standard, Thailand or equivalent model of COTTO.

Supply, fitting and fixing of infrared sensored Automatic Urinal Flash with 2-step system of pre-flashing and main flushing and capable of automatically activating hen the user comes and leaves the sensing range: Model no.108 (AC) of Solomon, Taiwan or equivalent model from manufacturers of Thailand/Singapore/Japan.

Supply, fitting and fixing of C.P. Shower Assembly complete with all standard accessories and fittings. Shower assembly shall be fitted to pipe end by using approved sealing compound to make the joint water tight as per drawing and direction of the Engineer-in-charge. Product shall be of Model No-A-6070 MovingShower with arm. of American Standard, Thailand or equivalent model of COTTO, Thailand.

Square type Shower tray, shower mixture, shower head, shower hose, shower tub filler including all The product shall be Model No. TF-7330, A-3900-976-400, A-6110-978-780, A-900-709 of American Standard, Thailand or equivalent model From Thailand/USA.

a) Supplying and installation of bevelled edge plate glass mirror (800 mm x 750 mm size) fitted in wall with screws including plastic plug, damp protection on back etc. all complete as per direction of the Engineer-in-charge. Product shall be of Model: No.- Caro-LV-01 of American Standard, Thailand or equivalent model of COTTO, Thailand.

b) Supplying and installation of locally made best quality bevelled edge plate glass mm x 750 mm size) fitted in wall with screws including plastic plug, damp protection etc. all complete as per direction of the Engineer-in-charge

Supply, fitting, fixing of CP towel bar respectively complete with CP wall bracket fitted on wall plastic plug and screws as per drawing and direction of the Engineer-in-charge.



Taka Four hundred thirty

60 set 435.00 five only 26,100.00 Taka Three

hundred thirty 30 set 335.00 Five only 10,050.00

C) Cort Hook American standard or equivalent model of Thailand Taka Two hundred eighty

28 set 280.00 only 7,840.00 4.20 C. P Soap Case

Taka 150 set 260.00 Two hundred 39,000.00

sixty only

4.21 Toilet Paper Holder Taka Two

85 set 210.00 hundred ten 17,850.00 only

4.22 UPVC STRAINER

a) 100mm dia 3 Piece Strainer (with cover)

120 Each 425.00 51,000.00

b) 100mm dia 2 Piece Strainer

20 Each 400.00 8,000.00

c) 150 mm dia Roof Rain Strainer 20 Each 500.00 10,000.00

d) 100 mm dia Roof Rain Strainer

Supply, fitting, fixing of CP towel bar respectively complete with CP wall bracket fitted on wall plastic plug and screws as per drawing and direction of the Engineer-in-charge.

a) Size: 610 mm x 25 mm Model No. TF-9485 Towel bar of American standard,Thailand or equivalent model of COTTO, Thailand.

b) Round Ring, Model No. TF-9332 Towel Ring of American standard, ThailandIr equivalent model of COTTO, Thailand.

Supply, fitting, fixing of CP Soap Case with counter sunk screws etc. complete. Soap case shall be fixed at location shown in the drawing and as per direction of the Engineer-in-charge. Product shall be Model No- TF 9401 of American Standard, Thailand or equivalent model of COTTO, Thailand.

Supply, fitting, fixing of CP brass toilet paper holder complete with CP brass bracket. Paper holder shall be fixed to the wall by using plastic bolt and screws and as per direction of the Engineer-in-charge. Product shall be Model No- TF 9411 paper Holder of American Standard, Thailand or equivalent model of COTTO, Thailand.

Supply, fitting, fixing of 100 mm dia uPVC Strainer complete with all accessories,colour should be matched with colours of floor tiles and approved by the Engineer-in-charge.

Taka Four hundred twenty

five only

Taka Four hundred only





d) 100 mm dia Roof Rain Strainer

40 Set 360.00 14,400.00 5.0 Automatic Soap dispenser

28 set 2,500.00 70,000.00

6.0 Automatic Head Dryer

28 set 6,700.00 187,600.00

7.0 Automatic Water Heater

a) 10 Gallon Capacity

12 Set 15,600.00 187,200.00

b) 15 Gallon Capacity

12 Set 18,000.00 216,000.00 8.0 RCC Pipe

a) 400 mm dia pipe

100 Rm 1,125.00 112,500.00

b) 300 mm dia pipe Taka Eight hundred

20 Rm 875.00 seventy five only 17,500.00 9.0 CATCH PIT


Supply, fitting, fixing of Automatic Liquid Soap Dispenser with Battery-Operated system, screws etc. complete, as per drawing and direction of the Engineer-in-charge. Product shall be Model No-9309 (Solomon, Taiwan) or equivalent model from Thailand/Singapore/Japan.


Supply, fitting, fixing of Automatic Hand Dryer with' AC-Operated system complete as er drawing and direction of the Engineer-in-charge. Product shall be Model No-HD-103 Solomon, Taiwan or equivalent model from Thailand/Singapore/Japan.

Taka Six thousand seven hundred only

Supply, fitting and fixing of Electric water heater shall be made of Stainless Steel-13 WG inner tank container with seamless welding pressure tested to leaks complete as per drawing and direction of the Engineer-in-charge. Outside jackets shall be prayed with scratch and Stainless Steel high gloss backed enamel paint. The heater shall be complete with adjustable Thermostat (30°C to 80°C) and automatic pressure release valve and all other required accessories. The water heaters Product shall be IEGA" Brand for SHAMEEM & COMPANY from Bangladesh.

Taka Fifteen thousand six hundred only

Taka Eighteen thousand only

Supply, fitting, fixing and laying 200 mm and 150 mm dia R.C.C pipe over 100 mm and 75 mm thick cement concrete (6:3:1) at base over a brick flat soling with proper gradient in trenches, making collar joints with gasket and cement mortar (1:1) including cutting trenches and refilling the same upto the required depth as per drawing and direction of the Engineer-in-charge.

Taka One thousand one hundred

twenty five only


in figure in word in Taka 1 2 3 4 5 6 7 Taka Four

40 Each 4,400.00 thousand four 176,000.00 hundred only

10.0 INSPECTION PIT Taka Five

50 Each 5,600.00 thousand six 280,000.00 hundred only

Taka seven 35 Each 7,500.00 thousand five 262,500.00

hundred only

11.0 C.I COVER Taka one

70 Each 1,200.00 thousand two 84,000.00 hundred only

12.0 SEPTIC TANK

Taka Four2 Each 430,000.00 hundred thirty 860,000.00

thousand only

13.0 SOAK WALL

Construction of masonry Catch pits, inside measurement (600 mm x 600 mm x 600 mm) with 250 mm thick brick work in cement mortar (4:1) and 100 mm thick R.C.C top (4:2:1) with necessary reinforcement with top MS Grating system as per drawing and direction of the Engineer-in-charge.

a) Construction of masonry Inspection pits, inside measurement (600 mm x 600 mm x 760 mm) with 250 mm thick brick work in cement mortar (4:1) and 100 mm thick R.C.C top (4:2:1) with necessary reinforcement as per drawing and direction of Engineer-in-charge.

b) Construction of masonry Inspection pits, inside measurement (760 mm x 900 mm x 1000 mm) with 250 mm thick brick work in cement mortar (4:1) and 100 mm thick R.C.C top (4:2: 1) with necessary reinforcement as per drawing and direction Engineer-in-charge.

Supply and installation of heavy duty C.I. manhole covers of 550 mm clear opening with frames (Minimum weight of cover to be 15 Kg) in top slab of inspection pits all complete as per drawings and direction of the Engineer-in-charge.

Construction of Septic Tank of different sizes with brick work/ RCC work in cement mortar (1 :6) as per approved drawings over a brick flat soling and 150 mm thick cement concrete flooring ( 1:2:4) with 125 mm thick walls in partition and 20mm thick cement plaster (1:4) to insides of walls with N.C.F. and 25mm thick patent stone (1:2:4) flooring with N.C.F. including supplying fitting and fixing of two R.C.C. Tees and providing 500mm dia water sealed heavy type C.I. manhole cover with locking arrangement and 100 mm thick R.C.C (1:2:4) Top slab with minimum 1% reinforcement including centering, shuttering, fabricating, casting and curing etc. complete, upto required depth including necessary earth work in excavation and shorting, bailing out water and side filing including the cost of all materials, operations and incidental charges, etc. all complete as per drawing and direction of Engineer-in-charge A) 250 Users Septic Tank



Taka Three4 Each 310,000.00 hundred ten 1,240,000.00

thousand only

14.0 PVC WATER TANK Taka Thirty six

4 Each 36,000.00 thousand only 144,000.00

15.0 PRESSURISED WATER DISTRIBUTION SYSTEM

Taka Three Pump Capacity : 500 GPM 2 Set 350,000.00 hundred fifty 700,000.00 Head required : 90 Meter thousand only RMP : 2900

Construction of Soak Well of different sizes with 250 mm thick solid brick work and 250 mm honey comb brick work with cement mortar (1 :6) as per design and drawings over R.C.C (1:2:4) well curb with 1.5% reinforcement including supplying and fixing 500mm dia water sealed heavy type C.I. manhole cover with locking arrangement filling the well upto the required depth with graded khoa and sand including supplying and fabricating M.S. Rod casting curing including necessary earth work in excavation, side filling and bailing out water including cost of all materials etc. all complete as per drawing, design and direction of the Engineer-in-Charge. a) 250 Users Soak Well

Supply fitting and fixing of best quality PVC WATER TANK capacity 3,000 litter including all fittings and accessories etc. all complete as per direction of the Engineer-in-charge. Tank shall be Gazi or Polycon Brand.

Supply, installation, testing & commissioning of hydro-pneumatics system comprising of following items complete in all respect as per direction of the Engineer-in-charge. All the pumps, component and accessories for the system shall be from USA/UK/Japan/Australia.

a) 3 Nos. vertical in line pumps complete in respect with heavy duty cast iron conforming to BS 1452, closed coupled centrifugal, Impeller shall be manufactured in gun-metal.

b) Accessories like isolating gate valve, on-return valves, and Interconnecting pipe work complete in all respect.Electrical Control Panel with logic controller relays. Pressure switch, pressure Gauge, Hand/Off/Auto switch, pump starter's duty selector switch, wiring cabling from panel to pumps, level controller, Power on light, run & trip, main isolator switch, terminal blocks suitable for field services interlocks complete with allaccessories as per manufacturer specification.



16.0 SUMP PUMP Taka forty

6 Set 40,000.00 thousand only 240,000.00

17.0 SLUDGE PUMP Taka fifty


18.0 VALVES & FITTINGS

18.1 GATE VALVES

a) 100 mm Dia

8 Each 5,200.00 41,600.00

b) 80 mm Dia

10 Each 3,625.00 36,250.00

c) 65 mm Dia10 Each 2,400.00 24,000.00

d) 50 mm Dia10 Each 1,600.00 16,000.00

e) 40 mm Dia Taka six hundred20 Each 660.00 sixty only 13,200.00

c) 1 No x 500 litre vessel with inner changeable butyl rubber membrane. Base frame: All components mild steel 7 hollow section frame & shall be primed & painted with protective undercoat & gloss finish.

Supply, installation, testing and commissioning of single stage Sump pump having a capacity to handle 40 Gpm of water against a head of 15 meter of wg. Product shall be from USA / UK/JAPAN/ Germany/Australia/Italy.

Supply, installation, testing and commissioning of single stage Sludge pump having a capacity to handle 45 Gpm of water against a head of 30 meter of wg. Product shall be from USA/UK/JAPAN/Germany/Australia.

Supply and installation of valves and fittings shall be capable to withstand a pressure of 200 psig. Valves of 80 mm & 100 mm dia shall be flanged end type complete with companion flanges, gasket etc. and valves of 40mm dia shall be of threaded end type. Valves shall be installed at location shown in the drawing and as per direction of Engineer-in-charge. Product shall be from UK/JAPANI Germany/ Australia/Italy .

Supply, fitting and fixing of Gate valves upto 40 mm dia of bronze body and valves above 40 mm dia of iron body to withstand a water pressure of 200 PSIG. Valves shall be installed at location as shown on the drawing complete with consumable, materials etc. as per direction of Engineer-in-charge.

Taka Five thousand two hundred only

Taka Three thousand six

hundred twenty five only

Taka Two thousand four hundred only

Taka One thousand six hundred only



f) 32 mm Dia Taka Five hundred5 Each 580.00 eighty only 2,900.00

g) 25 mm Dia Taka Four 20 Each 400.00 hundred only 8,000.00

h) 20 mm Dia Taka Three 2 Each 300.00 hundred only 600.00

18.2 GLOBE VALVES

a) 80 mm Dia

6 Each 5,500.00 33,000.00

b) 50 mm Dia

10 Each 3,400.00 34,000.00

c) 40 mm Dia

5 Each 2,800.00 14,000.00

d) 32 mm Dia

2 Each 2,800.00 5,600.00

e) 25 mm Dia

2 Each 2,650.00 5,300.00

f) 20 mm Dia

2 Each 2,500.00 5,000.00

18.3 STRAINER10 Each 5,900.00 59,000.00

18.4 CHECK VALVE 10 Each 5,900.00 59,000.00

Supply, fitting and fixing of Globe balues upto 40mm dia bronze body and above 40mm dia or iron body to withstand a water pressure of 200 PSIG. Values shall be installed at location as shown on the drawing complete with consumable, accessories etc. as per direction of Engineer-in-charge

Taka Five thousand five hundred only

Taka Three thousand four hundred only

Taka Two thousand eight hundred only

Taka Two thousand eight hundred only

Taka Two thousand six

hundred fifty only


Taka Five thousand nine hundred only

Supply, fitting and fixing of Strainers of cast iron body flanged end type assembly consumable and materials as per direction of the Engineer-in-charge a. 65 mm dia


Supply, fitting and fixing of Check Valve of iron body flanged end lift check type complete companion flange, nut bolt, gasket consumable and materials as per direction of the Engineer-in-charge a. 65 mm dia



18.5 FOOT VALVE 12 Each 5,400.00 64,800.00

18.6 FLEXIBLE JOINT

20 Each 4,700.00 94,000.00

18.7 FLOAT ASSEMBLY

5 Each 5,900.00 29,500.00

18.8 PRESSURE GUAGE

10 Each 4,000.00 40,000.00

18.9 PRESSURE REDUCING VALVE

a) 80 mm Dia

4 Each 40,000.00 160,000.00

b) 50 mm Dia

4 Each 17,200.00 68,800.00

c) 40 mm Dia

Supply, fitting and fixing of Check Valve of iron body flanged end lift check type complete companion flange, nut bolt, gasket consumable and materials as per direction of the Engineer-in-charge a. 65 mm dia


Taka Five thousand four hundred only

Supply, fitting and fixing of fOOT VALVE shall be flanged end/screwed end type with non-return valve & treainer as per direction of the Engineer-in-charge b. 65 mm dia

Supply, fitting and fixing of flexible joints of mouled neoprene and shall be capable to absorb shock and system hammering at the line water pressure of 200 psig complete with flanged end. Companion flanges, adjustable screw etc. flexible joint shall be installed at suction and discharge side of pump or as shown on the & shall be tested upto satistaction of the Engineer-in-charge. a. 65 mm dia

Taka Four thousand seven

hundred only

Supply and installation of float assembly suitable to install on 100 mm dia supply pipe. Float assembly shall be complete with float valve, float etc. complete as per direction of the Engineer-in-charge.a)65 mm dia


Supply and installation of Dial type Pressure Gauge of 75 mm dia suitable to read 0 to 300 psig pressure on water pipe complete with adapter, 3 mm pet cock etc complete as per direction of the Engineer-in-charge.

Taka Four thousand only

Supply fitting and fixing of Pressure Reducing Valves of the sizes complete in all respect as per direction of the Engineer-in-charge. Pressure reducing valve shall be suitable to adjust and maintain outlet pressure at 7.5 psig. Valve shall be flanged end type and complete with all control accessories.

Taka Forty thousand only

Taka Seventeen thousand two hundred only

Taka Twelve thousand only


in figure in word in Taka 1 2 3 4 5 6 7c) 40 mm Dia

4 Each 12,000.00 48,000.00

d) 32 mm Dia

2 Each 10,900.00 21,800.00

e) 25 mm Dia

2 Each 10,900.00 21,800.00 19.0 CABLE WORKS

1 L.S 1,500,000 1,500,000.00

20.0 WATER LEVEL CONTROLLER

8 Set 25,000.00 200,000.00

21.0 WASA CONNECTION

4 L.S 300,000.00 1,200,000.00

22.0 TESTING AND COMMISSIONING

1 L.S 500,000.00 500,000.00

Taka Twelve thousand only

Taka Ten thousand nine hundred only

Taka Ten thousand nine hundred only

Supply, installation and testing of electrical cable works complete with metalconduit with all fittings as per drawing and direction of Engineer-in-charge.

Taka One million five hundred

thousand only

Supply, installation, testing and commissioning of auto water level controller for all pump system and underground reservoir, as per direction of Engineer-in-charge. Controller shall be capable to start the pump in sequence when water level on tank drops down below preset level. The pump shall continue to run until the tank is filled upto preset level. The pump will not operate when there is no water in underground reservoir. Controller shall be complete with water level sensors, indication panel, control wiring (cable) with conduit etc. complete. Product shall be from USA/UK/JAPAN/German .

Taka Twenty five thousand only

Obtaining permission for Water connection from Dhaka WASA from the WASA Header to Building Premises including supply of Water Meter and installation of the Water Meter with all accessories and consumables as per drawings and direction of the Engineer-in-charge and as per approval of the Dhaka WASA. All required formalities with WASA shall be done by the Contractor.

Taka Three hundred thousand

only

After complete installation the system shall be tested and commissioned as per recommendation of the manufacturer and standard. Piping system shall be tested with pressure in presence of the Engineer-in-charge All testing of electrical system shall be done as per direction. Test certification shall be taken from the Engineer.

Taka Five hundred thousand

only



23.0 TITAS GAS SYSTEM A.

23.1 MS PIPE FOR TITAS GAS

a) 100 MM N.D (110.50MM )

50 Rm 2,625.00 131,250.00

b) 80 mm Dia (87.50mm)

100 Rm 1,650.00 165,000.00

c) 50 mm N.D (60.30mm)

150 Rm 930.00 139,500.00

D) 25 mm N.D (33.40mm)

25 Rm 500.00 12,500.00

E) 20 mm N.D (26.70mm)

100 Rm 350.00 35,000.00

23.2 BACK FILLING Taka six 300 cum 600 hundred only 180,000.00

23.3 BUTT WELDING

After complete installation the system shall be tested and commissioned as per recommendation of the manufacturer and standard. Piping system shall be tested with pressure in presence of the Engineer-in-charge All testing of electrical system shall be done as per direction. Test certification shall be taken from the Engineer.

Taka Five hundred thousand

only

Supply, fitting and fixing of MS pipe for TITAS Gas line of National Tube Product. Pipe work shall be complete with bends, tees, elbows, socket, union, reducers, hanger, bracket, clamp etc. complete. Approved type of sealant shall be used for threaded connection. All pipe shall be wrapped with two layer of Black Tape. Before wrapping with black tape the pipe surface shall be properly cleaned & read oxide paint. Pipe work shall be suitable to withstand a pressure test of 100 psig. All MS pipe work shall be done by "TITAS Approved Contractor".

Taka Two thousand six

hundred twenty five only

Taka One thousand six

hundred fiifty only

Taka Nine hundred thirty only


Taka Three hundred fifty only

Back Filling the trenches with sand (F.M 08) in 150mm layer, watering & consolidating each layer upto finished level.

Providing butt welded joints to pipes. tees, elbows etc. made above or below ground etc. all complete in all respects as per specifications of Titas Gas (T & D)Co. Ltd. & as per direction of the Engineer -in- charge. Before welding end of the pipe shall be properly beveled and cleaned. Measurement shall be done on per joint of welding.



a) 100 MM N.D (110.50MM )

20 Rm 320.00 6,400.00

b) 80 mm Dia (87.50mm)

30 Each 250.00 7,500.00

c) 50 mm N.D (60.30mm)

50 Each 220.00 11,000.00

d) 25 mm N.D (33.40mm)

50 Each 200.00 10,000.00

e) 20 mm N.D (26.70mm)

50 Each 185.00 9,250.00

23.4 VALVES

a) 50MM X 50MM Service Tee / Valve Tee

4 Each 25,000.00 100,000.00

b) 50 mm N.D flange valve 150 RF

2 Each 20,000.00 40,000.00

c) 50 mm N.D Adco valve 150 RF

2 Each 18,750.00 37,500.00

d) 25 mm N.D Adco valve

10 Each 10,600.00 106,000.00

e) 20 mm N.D Adco valve

Providing butt welded joints to pipes. tees, elbows etc. made above or below ground etc. all complete in all respects as per specifications of Titas Gas (T & D)Co. Ltd. & as per direction of the Engineer -in- charge. Before welding end of the pipe shall be properly beveled and cleaned. Measurement shall be done on per joint of welding.

Taka Three hundred twenty

only

Taka Two hundred fifty only

Taka Two hundred twenty

only

Taka Two hundred only

Taka One hundred eighty

five only

Supplying welding fitting & fixing of the different sizes valve Tee/Service Tee to connect the pipe lines with the Titas Gas Main pipe line etc all complete in all respects as per specification of Titas Gas(T&D) Go Ltd. & as per direction of the Engineer-in-charge.

Taka Twenty five thousand only

Taka Twenty thousand only

Taka Eighteen thousand seven hundred fifty only

Taka Ten thousand six

hundred only

Taka Nine thousand three

hundred seventy five only


in figure in word in Taka 1 2 3 4 5 6 7e) 20 mm N.D Adco valve

10 Each 9,375.00 93,750.00

f) 13 mm N.D Adco valve

10 Each 6,250.00 62,500.00

g) 50 mm N.D Gas strainer 150 RF

2 Each 12,500.00 25,000.00

h) Pressure Gage 0-5 psig

2 Each 750.00 1,500.00

i) 20 mm Plug & Socket Taka ninety

10 Each 90.00 only 900.00

j) MS Pipe Nipple Taka one hundred

10 Each 125.00 twenty five only 1,250.00 24.0 INSULATION FLANGE including

1 Each 18,750.00 18,750.00

25.0 VALVE PIT 1 Each 3,125.00 Taka three 3,125.00

thousand one hundred twenty

five only 26.0 TESTING & PURGING Taka One

500 Rm 100,000.00 hundred thousand 50,000,000.00 only

27.0 GAS REGULATOR

a) 50mm dia high pressure pilot system ( Regulator) Taka Thirty

Taka Nine thousand three


Taka Six thousand two

hundred fifty only

Taka Twelve thousand five hundred only

Taka Seven hundred fifty only

Taka Eighteen thousand seven

hundred fifty only Supplying fitting & fixing in position of cathode protection Insulation Flange etc. allcomplete of Titas Gas (T&D) Co Ltd. &direction of the Engineer- in- charge

Construction of standard size high-pressure valve pit including providing standard M.S sheet valve pit cover as per drawing specifications of Titas Gas (T & D)Co. Ltd. etc. all complete in all respects & direction of the Engineer-in- charge

Testing & Purging the pipe fines properly as per. Specifications of Titas Gas (T &D)Co. Ltd. etc. all omplete in all respects & direction of the Engineer- in- charge.

Supplying fitting & fixing standard Regulator approved by Titas Gas (T & D)Co Ltd. Including supplying of necessary fittings such as. Union socket. Elbow, Nipple etc all complete in all respects as per specification of Titas Gas (T & D ) Co. Ltd & direction of the Engineer-in-charge.


in figure in word in Taka 1 2 3 4 5 6 7a) 50mm dia high pressure pilot system ( Regulator)

1 Each 30,000.00 Thousand only 30,000.00

b) 25mm dia High pressure system (Regulator) Taka Thirteen4 Each 13,000.00 Thousand only 52,000.00

c) 20mm dia High pressure system ( Regulator ) Taka Seven 10 Each 7,000.00 thousand only 70,000.00

28 LOCK WING COCK Taka Four

10 Each 4,000.00 thousand only 40,000.00

29 ROAD CUTTING Taka Ten

50 Sqm 10,000.00 thousand only 500,000.00

30 COMMERCIAL HOUSE LINE30.1 G.I. PIPE

Take two

80 Rm 280.00 hundred eighty 22,400.00 only

30.2 LINE VALVES Taka One

10 Each 1,500.00 thousand 15,000.00 five hundred

only 30.3 GAS BURNER

Supplying fitting & fixing 20mm x 20mm (local) lock wing cock etc. all complete in all respects as per specification Titas Gas (T & D)Co Ltd. and as per direction of the Engineer-in-charge.

Cutting & permanent re installment of the pucca (Rigid I flexible) road & mending good the damages etc all complete in all respects as per specification Titas Gas(T& D)Co Ltd. and as per direction of the Engineer-in-charge.a) Bituminous Road

Installation of Commercial House GI pipe for supplying Titas Gas including supplying fitting & fixing in position different dia best quality fittings & accessories cutting trenches. Walls & floors. Etc. and back filling the trenches, restoring walls and floors etc. all complete in all respect as per specification of Titas Gas (T &D) Ltd and drawing and direction of the Engineer-in-chargea. 13 mm.N.D.

Supplying fitting and fixing in position different dia one way brass stop cock/gas cock best quality & heavy type cock. complete in all Gas (T &D) Go. Ltd and direction of the Engineer- in- chargea. 20 mm N.D.

Supply, fitting and fixing of best quality Machine Gas Burner for Kitchen Area including all Fittings & fixtures complete as per Drawing direction of the Engineer in charge



a) Residential Gas Burner Taka Two thousand five

10 Each 2,500.00 hundred only 25,000.00

b) Machine Gas Burner (Commercial Berner) Taka seven 4 Each 7,000.00 thousand only 28,000.00

31.0 TITAS GAS CONNECTION Taka Five

1 L.S 500,000.00 hundred 500,000.00 thousand only

69,558,385.00

Supply, fitting and fixing of best quality Machine Gas Burner for Kitchen Area including all Fittings & fixtures complete as per Drawing direction of the Engineer in charge

Complete Gas Connection from Titas gas line from nearest point available on road shall be under this contract. The work shall be complete with getting permission from Titas Authority, road cutting with permission, piping will all welding, taping. testing, regulator valve etc. complete in all respect. as per Drawing direction of the Engineer- in- charge


PART- C2 : INTERNAL ELECTRIFICATION WORKS SL Rate in Figure and Works NO. Description of Item Quantity Unit (To be Quoted) Quoted Amount


1.0 CONDUIT WORK

1.1.1 150 mm dia ( C - Class) 200 Rm 450.00 90,000.00

1.1.2 100 mm dia ( C - Class) 200 Rm 275.00 55,000.00

1.1.3 50 mm dia ( C - Class) 370 Rm 125.00 46,250.00

1.1.4 38 mm dia ( D - Class) 2800 Rm 88.00 Taka Eighty 246,400.00 eight only

1.1.5 25 mm dia water grade 56600 Rm 35.00 Taka Thirty 1,981,000.00 five only

1.1.6 25 mm dia Flexible pipe 8000 Rm 45.00 Taka Forty 360,000.00 Five only

1.1.7 38 mm dia Flexible pipe 280 Rm 50.00 Taka Fifty 14,000.00 Only

1.1.8 50 mm dia Flexible pipe 350 Rm 55.00 Taka fifty 19,250.00 Five only

Supply & Installation of PVC pipe and accessories of reputed manufacturers as per routing shown in the drawing, concealed/ surface mounted in columns, ceiling, walls and other various places as required, complete with bend/elbow, PVC circular boxes, shaddles, rowel plugs, sockets, lock-nuts, male/female bushes, 18SWG G.I.pull/wire, necessary thermo-cool, minimum 4-times taping of joints with plastic of thickness O.2mm, width 19mm, S-lon solvent cement, fish wire, tying with the reinforcement steel bar at the rate of 600mm spacing using 2X20 SWG G.I wire including tracing out the outlets after the shuttering are removed and clearing the outlets & mending good all damages as per drawings, specifications & direction of the Engineer-in-charge. This is an average rate with necessary number of 16SWG sheet steel make junction/pull boxes of appropriate sizes with 3mm approved colour (matching with all colour). all above mentioned materiall accessories of this item. The cost shall include the necessary cleaning and necessary civil works like cutting/ breaking of walls/columns/ceiling and mending the plastering /painting (approved colour)

as per instruction of the Engineer-in-charge. All materials of this item will be of approved quality

Taka Four hundred fifty only

Taka Two hundred Seventy five only

Taka One hundred twenty five only



2.00 CABLE WORK

2.1.1 IC - 1.5 MM2 BYA 77900 Rm 29.00 Taka Twenty 2,259,100.00 nine only

2.1.2 IC - 2.5 MM2 BYA 48000 Rm 45.00 Taka Forty 2,160,000.00 five only

2.1.3 IC - 4.0 MM2 BYA 1800 Rm 65.00 Taka Sixty 117,000.00 Five only

2.1.4 IC - 6.0 MM2 BYA 600 Rm 90.00 Taka ninety 54,000.00 only

2.1.5 IC - 10 MM2 BYA 300 Rm 145.00 Taka one 43,500.00 hundred forty

five only 2.1.6 IC - 6.0 MM2 NYY 3100 Rm 160.00 Taka one 496,000.00

hundred sixty only 2.1.7 IC - 10 MM2 NYY 1100 Rm 175.00 Taka one 192,500.00


2.1.8 IC - 16 MM2 NYY 3300 Rm 280.00 Taka two 924,000.00 hundred eighty

only 2.1.9 IC - 25 MM2 NYY 1400 Rm 415.00 Taka four 581,000.00

hundred fifteen only

2.1.10 IC - 35 MM2 NYY 120 Rm 560.00 Taka five 67,200.00 hundred sixty

only

Supply & installation of PVC insulated single core cable/PVC insulated & PVC sheathed single/multi core cables of BSTI approved & having ISO9001 certified co. of the following sizes in prelaid conduits/trench /tray and making good all damages and termination of connection at both ends as per drawing, specification and instruction of the Engineer-in-charge.

The rate should be quoted inclusive of locally available best/approved quality PIB insulating tape, ceiling rose(if necessary), cable sockets, solder less connector, cutting/ cleaning the prelaid PVC pipe, connection etc. This is an average rate and all material of this item will be of approved quality.



2.1.11 IC - 50 MM2 NYY 600 Rm 780.00 Taka Seven 468,000.00 hundred eighty

only 2.1.12 IC - 70 MM2 NYY 50 Rm 1,035.00 Take One 51,750.00

thousand thirtyfive only

2.1.13 IC - 95 MM2 NYY 460 Rm 1,500.00 Taka one 690,000.00 thousand fivehundred only

2.1.14 IC - 120 MM2 NYY 50 Rm 2,000.00 Taka Two 100,000.00 thousand only

2.1.15 IC -150 MM2 NYY 40 Rm 2,500.00 Taka two 100,000.00 thousand five hundred only

2.1.16 IC -185 MM2 NYY 50 Rm 3,000.00 Taka three 150,000.00 thousand

only 2.1.17 IC -240 MM2 NYY 60 Rm 3,600.00 Taka three 216,000.00

thousand six hundred only

3.0 EARTH CONTINUITY CONDUCTORS

3.1.1 IC-1.5 MM2 re BYA (Green) 38900 Rm 25.00 Taka twenty 972,500.00 five only

3.1.2 IC-2.5 MM2 re BYA (Green) 24000 Rm 40.00 Taka forty 960,000.00 only

3.1.3 IC-4.0 MM2 re BYA (Green) 500 Rm 65.00 Taka Sixty 32,500.00 five only

3.1.4 IC-6.0 MM2 BYA (Green) 960 Rm 90.00 Taka ninety 86,400.00 only

3.1.5 IC-10 MM2 BYA (Green) 300 Rm 150.00 Taka one 45,000.00 hundred fifty only

3.1.6 IC-16 MM2 BYA (Green) 1300 Rm 250.00 Taka two 325,000.00 hundred

Supply & installation of insulated/electrolytic annealed copper earth continuity conductor of BSTI approved & having 1809001 certified co.of following sizes in prelaid conduit along with cable including connection to various metallic parts as per specification, drawing and instruction of the Engineer-in-charge:



fifty only 3.1.7 IC-25 MM2 BYA (Green) 200 Rm 375.00 Taka three 75,000.00

hundred

seventy five only 3.1.8 IC-35 MM2 BYA (Green) 25 Rm 500.00 Taka Five 12,500.00

hundred only 3.1.9 IC-50 MM2 BYA (Green) 200 Rm 750.00 Taka Seven 150,000.00

hundred fifty only

3.1.10 IC-70 MM2 BYA (Green) 50 Rm 950.00 Taka NIne 47,500.00 hundred fifty

only

4.0 LIGHT FITTINGS 4.1 Taka one

35 Set 1,400.00 thousand four 49,000.00 hundred only

4.2Taka Two

thousand one 720 Set 2,130.00 hundred thirty 1,533,600.00

only 4.3

Taka Two thousand three

20 Set 2,300.00 hundred only 46,000.00

4.4Taka Two

thousand four 690 Set 2,450.00 hundred fifty 1,690,500.00

only 4.5 Taka one

thousand two 230 Set 1,270.00 hundred seventy 292,100.00

only

Supply & installation of imported 1x36W ceiling surface mounted fluorescent light fixture similar to Torando PX.ABS/Classic ASTB of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 1x36W fluorescent lamp, foreign 1 ballast, starter, capacitor and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 2x36W ceiling surface mounted fluorescent light fixture similar to Torando PX.ABS/Classic ASTB of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x36W fluorescent lamps, T foreign ballasts, starters, capacitors and all other necessary materials as per ,drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 2x36W ceiling recessed mounted fluorescent light 2 fixture similar to Relax PV Par Mat of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with mirror reflector, 2x36W fluorescent lamps, foreign ballasts, starters, capacitors and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 4x18W ceiling recessed mounted fluorescent light fixture similar Relax PV/LA of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with mirror reflector, 4x18W fluorescent lamps, foreign ballasts, starters, capacitors and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported ceiling recessed mounted double height light fixture similar to Down light 212 BR of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x26W energy saving lamp and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge.



4.6Taka six

30 Set 635.00 hundred thirty 19,050.00 five only

4.7Taka Six

1655 Set 600.00 hundred only 993,000.00

4.8Taka Nine

95 Set 950.00 hundred fifty 90,250.00 only

4.9 Taka Eight hundred forty

14 Set 840.00 only 11,760.00

4.10Taka Eight

20 Set 870.00 hundred seventy 17,400.00 only

4.11

Taka Ten10 Set 10,000.00 thousand only 100,000.00

4.12 Taka Three Thousand six

2 Set 3,600.00 hundred only 7,200.00

4.13Taka Five

Supply & installation of imported 2x9W surface mounted energy saving light fixture similar to 31 OPAL of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x9W energy saving lamps and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge

Supply & installation of imported ceiling recessed mounted light fixture similar to Down light 201 of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x13W energy saving lamp and all other necessary materials as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 1 x18W wall mounted mirror light fixture of similar to PLAST of OMS, Slovakia or F&G,Germany/Philip5, Netherlands complete with 1 X 18W fluorescent lamp, ballast, capacitor, holder, etc. and all other necessary accessories as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 2x9W surface mounted energy saving light fixture similar to Forwall 11 OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x9W energy saving lamps and all other necessary materials as per : drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported 2x9W surface mounted energy saving light fixture similar to Forwall 21 OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with 2x9W energy saving lamps and all other necessary materials as per : drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of impor1ed wall mounted building illumination light fixturesimilar to cat. no.20431 of Lanzini, Italy, or OMS, Slovakial F&G, Germany/Philips,Netherlands complete with 1X400W metal halide lamp, base plate, nuts, screwsetc. and all other necessary accessories as per drawing, specifications anddirection of the Engineer-in-charge.

Supply & installation of imported Aviation Light similar to PS14 with GLS-60W,822 lamp of Philips having blinking circuit arrangement complete with 8'-0" long1.5" dia G.I pipe, nuts, bolts, screws, holder and all other necessary accessoriesas per specification & direction of Engineer-in-charge.

Supply & installation of imported LED Exit sign light similar to Exit light 2841 of OMS, Slovakia or F&G, Germany/Philips, Netherlands complete with all respect to provide 4-hours backup time and all other necessary accessories as per drawing, : specifications




5.0 SWITCH BOARD5.1

5.1.1 1 GANG ( 10 A) 110 Set 230.00 Tala Two 25,300.00 hundred thirty

only 5.1.2 2 GANG ( 10 A) 115 Set 320.00 Tala Three 36,800.00

hundred twenty only

5.1.3 3 GANG ( 10 A) 164 Set 420.00 Tala Four 68,880.00 hundred twenty

only 5.1.2 4 GANG ( 10 A) 195 Set 570.00 Tala Five 111,150.00

hundred seventy only

5.2

5.2.1 SSB-1 Taka one 2 to 4 nos. Push button switch 26 set 1,000.00 thousand only 26,000.00

6.0 SOCKET OUTLET 6.1

Taka three 550 Set 375.00 hundred seventy 206,250.00

hours backup time and all other necessary accessories as per drawing, : specifications and direction of the Engineer-in-charge.

Supply and installation of impor1ed gang switches from Legrand (France UK) IM.K(UK)/Crabtree(UK) Nolex(UK) & wall boxes complete with all other necessary boxes complete with all other necessary accessories & connections everything complete as per drawing, specification and instruction of the Engineer-in-charge. The wall boxes may be locally made of 16SWG galvanized steel sheet includingearthing block.

Supply & installation of concealed/surface type special switches in totally insulated made switch board from Moeller/Siemens of appropriate dimension with sufficient spacing suitable for mounting the required nos. of switches, contactors, impulse relay, push button, earthing block, etc. from reputed manufactures like as per following ratings with cover and all other accessories & connections as per specifications, drawing & comprising of .

Supply and installation of imported 5A/13A, 3-pin, 250V, combined switched socket outlet from Legrand (France UK) IM.K(UK) I Crabtree(UK) Nolex(UK) suitable for 213 pin plug including the box, cover plate with necessary galvanized B237 machine screws, earthing block complete with necessary connections as per drawings, specifications and direction of the Engineer-in-charge. The box may be locally made of 16SWG galvanized steel sheet conforming to BS4662.



five only

6.2Taka

20 Set 500.00 Five hundred 10,000.00 only

6.3

Taka Six 4 Set 650.00 hundred fifty 2,600.00

only

6.4 Taka three thousand two

4 Each 3,220.00 hundred twenty 12,880.00 only

7.0 TELEPHONE SYSTEM7.1

7.1.1 700 Pairs 1 Set 20,700.00 Taka Twenty 20,700.00 thousand seven

hundred only 7.1.2 50 Pairs 1 Set 4,025.00 Taka Four 4,025.00

thousand twenty five only

7.1.3 30 Pairs 2 Set 2,875.00 Taka Two 5,750.00 thousand eight

Supply and installation of imported 5A/13A, 3-pin, 250V, combined switched socket outlet from Legrand (France UK) IM.K(UK) I Crabtree(UK) Nolex(UK) suitable for 213 pin plug including the box, cover plate with necessary galvanized B237 machine screws, earthing block complete with necessary connections as per drawings, specifications and direction of the Engineer-in-charge. The box may be locally made of 16SWG galvanized steel sheet conforming to BS4662.

Supply and installation of imported 15A, 3-pin, 250V, combined switched socket Quiet from Legrand (France UK) IM.K(UK)I Crabtree(UK) Nolex(UK) suitable for 3-pin plug including the box, cover plate with necessary galvanized machine screws, earthing block complete with necessary connections as per drawings.specifications and direction of the Engineer-in-charge. The box may be locallymade of 16SWG galvanized steel sheet conforming to BS4662.

Supply and installation of imported 15A, 3-pin, 250V, combined switched socket outlet from Legrand (France/UK) IM.K(UK)I Crabtree(UK) Nolex(UK) (outdoor type) & 3 pin plug of approved model including the box, cover plate with necessary galvanized machine screws, earthing block complete with necessary connections as per drawings, specifications and direction of the Engineer-in-charge. The box may be locally made of 16SWG galvanized steel sheet conforming to 8S4662.

Supply & installation of imported 16A/20A/25A 132A TP Motor protective circuit breaker from Moeller(Germany)/ Siemens(Germany) with auxiliary contacts, indicating lamps, etc. in flush/surface mounted totally insulated box as per drawing, specifications and direction of the Engineer-in-charge.

Supply & installation of imported surface /concealed type totally insulated telephone junction box made of polystrol/ polycarbonate board from Moeller (Germany)/Siemens(Germany) of following sizes with connecting strip and all required accessories such as insulator, screw, rubber bushing, rowel plug etc. as per drawing, specification and instruction of the Engineer-in-charge.




7.1.4 20 Pairs 1 Set 2,075.00 Taka Two 2,075.00 thousand seventy

five only 7.1.5 15 Pairs 1 Set 1,725.00 Taka one thousand 1,725.00

seven hundred twenty five only

7.2Taka Three

175 Set 335.00 hundred thirty 58,625.00 five only

7.3

7.3.1 200 Pairs Cable (Under ground) 200 Rm 2,000.00 Taka Two 400,000.00 Thousand only

7.3.2 50 Pairs Cable 14 Rm 570.00 Take five hundred 7,980.00 seventy only

7.3.3 30 Pairs Cable 50 Rm 385.00 Take three 19,250.00 hundred eighty

five only 7.3.4 20 Pairs Cable 20 Rm 260.00 Take two 5,200.00

hundred sixty only 7.3.5 15 Pairs Cable 10 Rm 200.00 Taka two 2,000.00

hundred only 7.3.6 3 Pairs Cable 41000 Rm 38.00 Taka Thirty 1,558,000.00

eight only 8.0 FAN8.1 Taka one

22 Set 100.00 hundred only 2,200.00

8.2 Taka two 22 Set 2,400.00 thousand four 52,800.00

hundred only 8.3 Take two thousand

8 Set 2,600.00 six hundred 20,800.00 only

Supply and installation of imported jack type shuttered telephone socket outlet from Legrand (France/UK) IM.K(UK)I Crabtree (UK) Nolex(UK) with sheet steel box and all other accessories as per specifications, drawing and direction of the Engineer-in-charge.

Supply & installation of telephone cable of BSTI approved cable of the following sizes in prelaid conduit and termination of connection as per drawing, specifications and instruction of the Engineer-in-charge.

Supply & installation of concealed type fan hook box (size: 4.5" dia & depth 2") made of 16SWG sheet steel box of approved quality everything complete as per : specifications, drawing and direction of the Engineer-in-charge.

Supply & installation of 56" sweep ceiling mounted fan approved quality of reputed company everything complete with regulator, fixing accessories, hard : wares etc. as per drawing, specifications and direction of the Engineer-in-charge

Supply & installation of 16" sweep 220V,50HZ, A.C wall mounted industrial type exhaust fan approved quality of reputed company everything complete with fixing accessories, hard wares etc. as per drawing, specifications and direction of the Engineer-in-charge



9.0 DISTRIBUTION BOARD 9.1

9.1.1 MDB -& EMDB -Basement-2

Incoming : 1 x 100A TP MCB / DS ( C-curve)

Outgoing : 2 x 25A TP MPCB Take One hundred

: 6 x 16A SP MCB ( C-curve) 2 Set 150,000.00 fifty thousand 300,000.00 : 15 x 20A SP MCB ( C- curve) only

5 x 20A TP Contractor with auxilliary contact

5 x 16A SP Impulse Relay

2 x 120A TP+N+E Plug in type insulated Busbar9.1.2 MDB -& EMDB -Basement-1

Incoming : 1 x 100A TP MCB / DS ( C-curve)

Outgoing : 2 x 25A TP MPCB Take One hundred : 9 x 16A SP MCB ( C-curve) 2 Set 115,000.00 fifteen thousand 230,000.00 : 12 x 20A SP MCB ( C- curve) only 4 x 20A TP Contractor with auxilliary contact


2 x 120A TP+N+E Plug in type insulated Busbar9.1.3 EMDB -Fire Pump Take Thirty six

Incoming : 1 x 200A TP MCCB 1 Set 36,000.00 thousand 36,000.00

Supply, installation, testing & commissioning of imported, type tested assembly, totally insulated distribution boards with insulated cover conforming to IEC439-1 from Moeller/Siemens(Germany) having ISO9001 certificate housing the following rated MCB/ELCB /MCCB /MPCB/ ON-OFF disconnecting switches, contactors, impulse relay & bus bars and all other accessories as per technical specification & drawings. All the MCCB shall have adjustable overload & adjustable short circuit releases, rotary handle & interrupting capacities as stated in the specification.

The distribution board shall be of suitable dimensions so as to accommodate the circuit breakers and busbars with insulated shroud with sufficient spacing including internal connection cables in the board and other materials, -shall be suitable for concealed /surface mounted type having PVC cable glands/ grommets of appropriate sizes, shall have knockout for conduits entry & exist, a suitable size copper plate earthing block must be provided inside the box.

The rate should be quoted inclusive of all required inclusive of all required material for this item & the cost shall include the necessary clearing and necessary civil works like cutting and breaking of walls/columns/ceiling /floors and mending the same including the plastering & painting as per instruction of the Engineer-in-charge.



9.1.4 EMDB -Water Pump

Incoming : 1 x 200A TP MCCB

Outgoing : 2 x 100A TP MPCB/MPCB Taka one hundred

: 2 x 25 SP MCCB 1 Set 105,000.00 five thousand 105,000.00 : 300A TP +N+E Bushbar only

9.1.5 MDB -Ground Floor

Incoming : 1 x 200A TP MCCB / DS

Outgoing : 1 x 125A TP MCB (C-curve) Take one hundred

: 1 x 63A TP MCB ( C-curve) 1 Set 120,000.00 twenty thousand 120,000.00 : 1 x 40A TP MCB ( C- curve) only

: 2 x 32A TP MCB ( C- curve)

2 x120A TP+N+E Plug-in type insulated Busbar9.1.6 SDB-1 Ground Floor

Incoming : 1 x 40A TP MCB / DS (C-curve)

+add-on 40A 4P (100mA) ELCB

Outgoing : 9 x 16A SP MCB (C-curve) Take Eoghty five

: 3 x 20A SP MCB ( C-curve) 1 Set 85,000.00 thousand only 85,000.00 1 x 20A TP Contractor with auxiliary contact

1 x 20A TP Contractor with auxiliary contact

1 x 16A SP Impilse Relay

1 x 120A TP+N+E Plug-in type insulated Busbar9.1.7 SDB-2 Ground Floor

Incoming : 1 x 63A TP MCB/DS (C-curve)


Outgoing : 6 x 16A SP MCB (C-curve) Take one hundred : 9 x 20A SP MCB (C-curve) 1 Set 100,000.00 thousand only 100,000.00 3 x 20A TP Contactor with auxilliary contact


1 x 120A TP+N+E Plug-in type insulated Busbar9.1.8 SDB-3 Ground Floor


+add-on 32A 4P (100mA) ELCB Take Fifty two Outgoing : 9 x 16A SP MCB (C-curve) 1 Set 52,000.00 thousand only 52,000.00



1 x 120A TP+N+E Plug-in type insulated Busbar9.1.9 EMDB Ground Floor

Incoming : 1 x 63A TP MCB / DS (C-curve) Take Sixty fiveOutgoing : 2 x 40A TP MCB (C-curve) 1 Set 65,000.00 thousand only 65,000.00 2 x 20A TP MCB (C-curve)

2 x 120A TP+N+E Plug-in type insulated Busbar

9.1.10 ESDB-1 Ground Floor



Outgoing : 6 x 16A SP MCB (C-curve) Take Eighty : 6 x 20A SP MCB (C-curve) 1 Set 85,000.00 five thousand 85,000.00 2 x 20A TP Contactor with auxilliary contact only 2 x 16A SP Impulse Relay

1 x 120A TP+N+E Plug-in type insulated Busbar9.1.11 ESDB-2 Ground Floor



Outgoing : 3 x 16A SP MCB (C-curve) Take Eighty : 6 x 20A SP MCB (C-curve) 1 Set 85,000.00 five thousand 85,000.00 2 x 20A TP Contactor with auxilliary contact only 2 x 16A SP Impulse Relay


9.1.12 ESDB-3 Ground Floor


+add-on 25A 4P (100mA) ELCB Take Sixty Outgoing : 6 x 16A SP MCB (C-curve) 1 Set 60,000.00 thousand only 60,000.00 1 x 120A TP+N+E Plug-in type insulated Busbar

9.1.13 MDB-1 1st. Floor

Incoming : 1 x 160A TP MCCB / DS (C-curve) Take OneOutgoing : 1 x 100A TP MCB (C-curve) 1 Set 120,000.00 hundred twenty 120,000.00 2 x 40A TP MCB (C-curve) thousand only



2 x 32A TP MCB (C-curve)


9.1.14 SDB-1 & 2 First Floor


+add-on 40A 4P (100mA) ELCB Take Fifty eight Outgoing : 12 x 16A SP MCB (C-curve) 2 Set 58,000.00 Thousand only 116,000.00 1 x 120A TP+N+E Plug-in type insulated Busbar

9.1.15 SDB-3 1st. Floor

Incoming : 1 x 32A TP MCCB / DS (C-curve)

+add-on 32A 4P (100mA) ELCB Take Fifty Outgoing : 9 x 16A SP MCB (C-curve) 1 Set 54,000.00 Four thousand 54,000.00 2 x 120A TP+N+E Plug-in type insulated Busbar only

9.1.16 EMDB First Floor

Incoming : 1 x 80A TP MCB / DS (C-curve) Take sixty fiveOutgoing : 1 x 40A TP MCB (C-curve) 1 Set 65,000.00 thousand 65,000.00 2 x 32A TP MCB (C-curve) only 2 x 120A TP+N+E Plug-in type insulated Busbar

9.1.17 ESDB-1 First Floor


+add-on 40A 4P (100mA) ELCB Take Fifty eight Outgoing : 12 x 16A SP MCB (C-curve) 1 Set 58,000.00 Thousand only 58,000.00 2 x 32A TP MCB (C-curve)

2 x 120A TP+N+E Plug-in type insulated Busbar9.1.18 ESDB-2 & 3 First Floor


+add-on 25A 4P (100mA) ELCB Take Fifty fiveOutgoing : 6 x 16A SP MCB (C-curve) 2 Set 55,000.00 Thousand only 110,000.00 1 x 120A TP+N+E Plug-in type insulated Busbar

9.1.19 MDB-2nd floor


Outgoing : 1 x 125A TP MCB (C-curve) Take One 2 x 63A TP MCB (C-curve) 1 Set 150,000.00 hundred fifty 150,000.00 1 x 40A TP MCB (C-curve) thousand only




2 x 120A TP+N+E Plug-in type insulated Busbar9.1.20 SDB-1 2nd Floor


+add-on 40A 4P (100mA) ELCB Take Forty eight Outgoing : 12 x 16A SP MCB (C-curve) 1 Set 48,000.00 Thousand only 48,000.00 1 x 120A TP+N+E Plug-in type insulated Busbar

9.1.21 SDB-2 & 3 2nd Floor


+add-on 63A 4P (100mA) ELCB Take Seventy six Outgoing : 18 x 16A SP MCB (C-curve) 2 Set 76,000.00 Thousand only 152,000.00 2 x 120A TP+N+E Plug-in type insulated Busbar

9.1.22 SDB-4 2nd. Floor


+add-on 32A 4P (100mA) ELCB Take Ninety Outgoing : 3 x 16A SP MCB (C-curve) 1 Set 90,000.00 Thousand only 90,000.00 2 x 20A SP MCB (C-curve)

2 x 20A TP contractor with auxiliary contact

2 x 16A SP impulse Relay

2 x 120A TP+N+E Plug-in type insulated Busbar9.1.23 EMDB - 2nd. Floor

Incoming : 1 x 63A TP MCCB / DS (C-curve) Taka Fifty five Outgoing : 2 x 32A TP MCB (C-curve) 1 Set 55,000.00 Thousand only 55,000.00 2 x 25A TP MCB (C-curve)

1 x 120A TP+N+E Plug in type insulated Busbar

9.1.24 ESDB 1 - 2nd. Floor


+add-on 40A 4P (100mA) ELCB Taka Fifty Outgoing : 12 x 16A SP MCB (C-curve) 1 Set 50,000.00 Thousand only 50,000.00 1 x 120A TP+N+E Plug in type insulated Busbar

9.1.25 ESDB 2 & 3 2nd. Floor


+add-on 32A 4P (100mA) ELCB Taka Fifty Outgoing : 9 x 16A SP MCB (C-curve) 2 Set 50,000.00 Thousand only 100,000.00 1 x 120A TP+N+E Plug in type insulated Busbar



9.1.26 ESDB 4- 2nd. Floor


+add-on 25A 4P (100mA) ELCB Taka Sixty eight Outgoing : 9 x 16A SP MCB (C-curve) 1 Set 68,000.00 Thousand only 68,000.00 1 x 120A TP+N+E Plug in type insulated Busbar

9.1.27 MDB - 3rd Floor

Incoming : 1 x 200A TP MCCB / DS Taka One Outgoing : 1 x 100A TP MCB (C-curve) 1 Set 100,000.00 hundred thousand 100,000.00 2 x 63A TP MCB (C-curve) only 1 x 40A TP MCB (C-curve)



9.1.28 SDB 1 & 2 3rd Floor Taka Eighty Incoming : 1 x 63A TP MCB / DS ( C-curve) 2 Set 80,000.00 Thousand only 160,000.00 +add-on 40A 4P (100mA) ELCB

Outgoing : 18 x 16A SP MCB (C-curve) 2 x 120A TP+N+E Plug in type insulated Busbar

9.1.29 SDB 3 3rd Floor Taka Ninety Incoming : 1 x 40A TP MCB / DS ( C-curve) 1 Set 90,000.00 Thousand only 90,000.00 +add-on 40A 4P (100mA) ELCB




9.1.30 SDB 4 - 3rd Floor Taka Fifty Incoming : 1 x 25A TP MCB / DS ( C-curve) 1 Set 50,000.00 Thousand only 50,000.00 +add-on 32A 4P (100mA) ELCB


9.1.31 EMDB -3rd Floor Taka Fifty Incoming : 1 x 32A TP MCB / DS ( C-curve) 1 Set 50,000.00 Thousand only 50,000.00 +add-on 32A 4P (100mA) ELCB


9.1.32 ESDB 1 & 2 - 3rd Floor Taka Fifty Incoming : 1 x 32A TP MCB / DS ( C-curve) 2 Set 50,000.00 Thousand only 100,000.00 +add-on 32A 4P (100mA) ELCB


9.1.33 ESDB 3 & 4 - 3rd Floor Taka forty nine Incoming : 1 x 25A TP MCB / DS ( C-curve) 2 Set 49,000.00 Thousand only 98,000.00 +add-on 32A 4P (100mA) ELCB


9.1.34 MDB 4th to 5th Floor Taka one hundred Incoming : 1 x 160A TP MCCB / DS 2 Set 105,000.00 five thousand 210,000.00 Outgoing : 1 x 80A TP MCB (C-curve) only 2 x 63A TP MCB (C-curve)






9.1.35 SDB-1 & 2 - 4th to 5th Floor Taka Eighty Incoming : 1 x 63A TP MCB / DS (C-curve) 4 Set 80,000.00 Thousand only 320,000.00 +add-on 40A 4P (100mA) ELCB

Outgoing : 18 x 16A SP MCB (C-curve)


9.1.36 SDB -3 -4th to 5th Floor Taka fifty two Incoming : 1 x 25A TP MCB / DS (C-curve) 2 Set 52,000.00 Thousand only 104,000.00 +add-on 32A 4P (100mA) ELCB



9.1.37 EMDB -4th to 5th Floor Taka fifty two Incoming : 1 x 63A TP MCB / DS (C-curve) 2 Set 52,000.00 Thousand only 104,000.00 Outgoing : 2 x 32A TP MCB (C-curve)



9.1.38 ESDB-1&2 -4th to 5th Floor Taka forty eight Incoming : 1 x 32A TP MCB / DS (C-curve) 4 Set 48,000.00 thousand only 192,000.00 +add-on 32A 4P (100mA) ELCB



9.1.39 ESDB-3 -4th to 5th Floor

Incoming : 1 x 25A TP MCB / DS (C-curve) 2 Set 50,000.00 Taka Fifty 100,000.00 +add-on 32A 4P (100mA) ELCB Thousand only Outgoing : 6 x 16A SP MCB (C-curve)


9.1.40 DB-1 -LIFT

Incoming : 1 x 400A TP MCCB / DS 1 Set 190,000.00 Taka One hundred 190,000.00 Outgoing : 1 x 160A TP MCCB ninety



4 x 100A TP MCCB Thousand only 6 x 16A/20A SP MCB

630A TP +N+E Bushbar

9.1.41 SDB-LIFT

Incoming : 1 x 160A TP MCCB / DS 1 Set 110,000.00 Taka One hundred 110,000.00 Outgoing : 2 x 100A TP MCCB Ten 3 x 16A/20A SP MCB Thousand only 250A TP +N+E Bushbar

10.0 TRAFFIC SIGNAL SYSTEM

10.1 Taka Thirteen 9 Set 13,000.00 Thousand only 117,000.00

11.0 LIGHTING PROTECTION

11.1 Taka One 28 Set 1,100.00 thousand one 30,800.00

hundred only

11.2 Taka Three 182 Rm 320.00 hundred twenty 58,240.00

11.3 Taka Six 630 Rm 635.00 hundred thirty 400,050.00

five only 11.4 Take nine

7 Set 950.00 hundred fifty 6,650.00 only

11.5 Take one 75 Rm 1,035.00 thousand thirty 77,625.00

five only 11.6 Taka fourteen


Supply and installation of imported traffic signal light system from reputed manufacture's complete with red, yellow and green colour lights, push button, impulse relay, contactor, timer (if necessary) and other accessories as per drawing specifications and instruction of the Engineer-in-charge.

Supply and installation of 450mm long 12mm dia single point copper air-terminal including necessary bolts, nuts, clamps & all other accessories as shown in the drawing.

Supply and installation of roof and intermediate conductor made of 2SWG copperwire complete with necessary hole making, connecting the brass plate of air-terminals, down conductors, etc. complete as per drawing.

Supply and installation of solid copper wire 2X1/0 SWG in 40mm dia PVC pipe as down conductor as per drawing & specifications.

Supply and installation of test point of size 225X125X100mm made of 16SWG--sheet steel having a copper bar of 1 OOX38X 19mm as per drawing & specifications.

Supply & installation of solid copper wire earthing lead 2X2/0 SWG in 38mm dia G.I. pipe and termination of connections at both ends as per drawing & specifications.

Supply and installation of 38mm dia, 12m long G.I. pipe earth electrode sunk up to a depth of 12m below ground level to be used as earth electrode as per drawing and specifications



11.7 Taka One thousand six

10 Set 1,600.00 hundred only 16,000.00 12.0 CABLE TRAY/LADDER12.1

Take one12.1.1 100mm width, 75mm -depth thousand five

450 Rm 1,500.00 hundred only 675,000.00

12.1.2 600mm width, 150mm -depth Take six 25 Rm 6,000.00 thousand only 150,000.00

28,007,565.00

specifications

Construction of 300X300X300mm earth inspection pit with R.C.C cover as perdrawing & instruction of the Engineer-in-charge.

Supply and installation of cable tray/ladder made of 18SWG galvanized sheet steel/angle bar, flat bar of Approved quality of following sizes complete with necessary hangers, supports, cover junction box, angers, clamps, bends, nuts, bolts, washer & all other accessories as per drawing, specifications & direction of the Engineer-in-charge.


PART- D2 : SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF DEEP TUBEWELL SL Rate in Figure and Works NO. Description of Item Quantity Unit (To be Quoted) Quoted Amount


1 Take Fifty 1 L.S 50,000.00 Thousand only 50,000.00

2

a) From 0 to 50m 50 Rm 1,400.00 Taka one thousand 70,000.00 four hundred only b) From 50 to 100m 50 Rm 1,700.00 Taka one thousand 85,000.00

seven hundred only

c) From 100 to 150m 50 Rm 2,000.00 Taka Two 100,000.00 thouusand only

d) From 150 to 200m 50 Rm 2,300.00 Taka Two thousand 115,000.00 three hundred

only 3

a) 100mm dia bail plug 3m long 1 Each 7,000.00 Taka Seven 7,000.00 thousand only b) 100mm dia blind G.P Pipe 52 Rm 800.00 Taka Eight 41,600.00

hundred only c) 100mm dia S.S Strainer 60 Rm 8,600.00 Taka eight thousand 516,000.00

six hundred only d) 200mm x 100 mm Reducer 1 Each 10,000.00 Taka Ten 10,000.00

Transpor1ation of Complete boring Equipment's, Labours, Carrying of all Materials to site, Removing the surplus materials after Completion of work, installation of equipment's, making necessary arrangements of electricity, water, labour shed, site office and store, digging mud pit etc. all complete.

Execution of Tube well boring specification location water jet or other approved method, the boring is 400 mm dia ver1ical hole up to designed depth and collection of soil sample at every 10 m interval and at every charge of formation of soil including sinking of necessary casing pipe (Measurement will be allowed from G.L to bottom of blank pipe and the rate is inclusive of the cost of extra depth of boring for caving and siltation). Length of boring necessary depending on the test result of test boring and recommendation of BUET (stat size and length of strainer will however be confirmed by BUET depending on the test result of test boring)

Supply and Complete installation of the following tube well fixtures as per approved available materials in the market and direction of Engineer-in-charge



thousand only

e) 200mm dia M.S Housing Pipe 60 Rm 6,500.00 Taka Six thousand 390,000.00 five hundred only

f) Gravel Packing around the tube well upto 15'-0 above the filter 10 Cum 1,600.00 Taka one thousand 16,000.00 six hundred only

g) Centralizer made 12 BWG MS rod at an interval of 5M 40 Each 500.00 Taka Five 20,000.00 hundred only

h) 40mm dia M.S casing upto min 2M below the raft foundation of building 8 Rm 5,000.00 Taka five 40,000.00 thousand only

4 Taka forty 1 L.S 40,000.00 thousand only 40,000.00

5 Taka forty 1 L.S 40,000.00 thousand only 40,000.00

6 Taka one 100 Rm 120.00 hundred twenty only 12,000.00

7 Taka Eight 2 Cum 8,000.00 Thousand only 16,000.00

8 Taka Fifteen 1 L.S 15,000.00 thousand only 15,000.00

9

Taka Four 1 L.S 400,000.00 hundred thousand 400,000.00

only

10 Taka Three

hundred thiusand 1 L.S 300,000.00 only 300,000.00

11Taka Seventy

1 Item 75,000.00 five thousand 75,000.00 only

2,358,600.00

Development of tube well by alternate surging and pumping by compressor uptosatisfactory cleaning of water.

Testing of the well by required Capacity of water which will be Continued upto 72hrs or steady state Condition is attained

Filling the bore hole around the tubewell top of shrouding upto the bottom of sanitary seal by selected soil or local clay as pe standard specification

Making sanitary seal upto a minimum depth of 6M from GL with 12mm down graded brick chips in the ration ( 1:1.5:3)

Water analysis to be carried out from BUET as detailed in specification of tender document.

Supply, Installation,Testing and commissioning of submersible pump of any reputed brad of 80 USGMP capacity against a total head of 60M The pump shall complete with all necessary under water cable, control/ starter penel made of 20 BWG steel sheet, circuit breaker, starter, overload relay, time delay relay, voltmeter, ammeter, 100mm dia pressure gauge. The work include supply and installation of necessary check valve, gate valve and column pipe of required diameter.

Obtaining requisite permission from Dhaka WASA or any other Govt. agency for sinking of Tubewell (The Contractor shall be responsible for obtaining permission from WASA or other Govt agency )

38mm dia test boring including supply of all materials required to complete test boring at site to selected place upto a depth of 300 m or upto satisfactory layer of water obtained as per specifications including testing of water and collecting sample of soil at an internal of 10m and as per direction of Engineer-in-Charge.

CIVIL #REF! PLUMBING 69,558,385.00 ELECTRICAL 28,007,565.00 DEEP TUBEWELL 2,358,600.00

#REF!

Taka One million Five hundred thousand only

Taka Seven hundred forty two thousand nine hundred seventeen

Taka One million Five hundred thousand only

boq- pani bhaban

Documents