bottom hung open in windows - home - titon inc...sto botto hng oen n nos e12.12.05 sto se 4328...
TRANSCRIPT
-
SALTO SAFE 4328E12.12
E12
BOTTOM HUNG OPEN IN WINDOWS
01.12.2018
Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
-
E12.12.02 SALTO BOTTOM HUNG OPEN IN WINDOWS
SALTO SAFE 4328
E12.12
CONTENTS
1. General characteristics....................................................... E12.12.03
2. Base set n° 4328 ................................................................. E12.12.04
3. Vertical centre locking sets n° 4028-30, 4028-31 ............ E12.12.05
4. Horizontal centre locking set n° 4328-35 ......................... E12.12.06
5. Hinges .................................................................................. E12.12.06
6. Handles ................................................................................ E12.12.07
7. Ordering table ..................................................................... E12.12.08
8. General information ............................................................ E12.12.09
-
1. General characteristics
• To make your bottom hung windows extra secure against burglary, you should use the high security system SALTO SAFE 4328.
• Dependent on the window dimensions you should use the following sets: - base set n° 4328 for:
- vent width Fb=750-1200 mm and - vent height Fh=900-1200 mm page E12.12.04.
- vertical centre locking set n° 4028-30 for vent height Fh=1200-1800 mm page E12.12.05. - vertical centre locking set n° 4028-31 for vent height Fh=1800-2400 mm page E12.12.05. - horizontal centre locking set n° 4328-35 for vent width Fb=1200-1400 mm page E12.12.06.
• The set contains the following high security parts:
- stainless steel mushroom head bolts pre-riveted to zinc alloy connection pieces, which are connected to the SALTO components and rods in the vent section.
- zinc alloy security keeps which are fixed on the frame section with clamping plates and self-drilling screws.
- protection pieces close to the handle and the corner transmission.
- anti-lift pins at the hinge side.
• The high security set should always be operated by a cylinder locking handle, available in 4 types (see page E12.12.07).
• All parts are made of non-corroding materials.
• Size range: - vent width: 750-1400 mm. - vent height: 900-2400 mm. - vent weight: max. 90 kg.
• Special dimensions on request!
• This system is suitable for sections with frame groove width of 14 mm. See drawing.
SALTO BOTTOM HUNG OPEN IN WINDOWS E12.12.03
SALTO SAFE 4328
E12.12
-
2. Base set n° 4328Vent width Fb = 750-1200 mmVent height Fh = 900-1200 mm
SALTO SAFE 43281 1907-358 corner transmission1 1907-358B corner transmission2 4008-184 keep2 4010-344A locking point1 4010-344B locking point2 4010-344C locking point1 4020-232B connection piece6 4020-233 nut1 4020-325B safety piece1 4020-345 locking point1 4020-346 connection piece2 4028-182 thickness piece1 4308-360 link arm2 30000-690 screw6 30310-840 keep6 M5x12 washer DIN 965
Installation keep n° 30310-840
Slide in clamping plate before the assembly of the
frame
Screw the plate to the
keep
Screw the keep after positioning
+2 4208-143 anti-lift pin
E12.12.04 SALTO BOTTOM HUNG OPEN IN WINDOWS
SALTO SAFE 4328
E12.12
-
3. Vertical centre locking sets n° 4028-30, 4028-31Vent height Vent heightFh = 1200-1800 mm Fh = 1800-2400 mm
4028-301 4000-334 locking point1 4000-345 locking point2 4008-184 keep1 4010-344A locking point1 4010-344C locking point1 4020-346 connection piece2 30310-840 keep
4328+
43284028-30
+4028-31
1 4000-334 locking point1 4000-345 locking point2 4008-184 keep1 4010-344A locking point1 4020-345 locking point3 4020-346 connection piece2 30310-840 keep
or
SALTO BOTTOM HUNG OPEN IN WINDOWS E12.12.05
SALTO SAFE 4328
E12.12
-
4. Horizontal centre locking set n° 4328-35Vent width Fb = 1200-1400 mm
5. Hinges• The hinges have the same shape as the turn-tilt hinges. Both turn-tilt windows and bottom hung windows
can be placed next to one another with the advantage of having the same appearance.
• Finish of the hinges: aluminium anodised or polyester powder coated (more than 450 RAL colours).
Chrono hinge n° 26140-750
max. vent weight: 90 kgmax. vent width: 1400 mm
43282x 4208-143
+4328-35
1 4000-334 locking point1 4008-184 keep1 4010-344A locking point1 30310-840 keep
+1 4208-143 anti-lift pin
Order code 26140-750Fb=max. 1200 mm 2 hingesFb=1200-1400 mm 3 hinges
E12.12.06 SALTO BOTTOM HUNG OPEN IN WINDOWS
SALTO SAFE 4328
E12.12
-
6. Handles
• The high security system must always be operated by cylinder locking handles n° 4000-... CYL.• The cylinder locking handle can be locked in closed and tilt position.• The same handles can also be used for turn and tilt windows and tilt and turn windows. In that case,
bottom hung windows, turn-tilt windows and tilt-turn windows can be used next to one another with the advantage of having the same appearance.
• Finish : - handle n° 4000-219 CYL, n° 4000-217 CYL: grip in aluminium and base in zinc alloy, always polyester powder coated (more than 450 RAL colours).
- handle n° 4000-215 CYL, n° 4000-214 CYL: grip and base in aluminium anodised or polyester powder coated (more than 450 RAL colours).
• Fixing holes see page A12.11.11.
n° 4000-219 CYL
throw X=17 mm by turning 90°
n° 4000-217 CYL
throw X=17 mm by turning 90°
n° 4000-215 CYL
throw X=17 mm by turning 90°
n° 4000-214 CYL
throw X=17 mm by turning 90°
Cover n° 20000-659-6
Not possible
- Cover to restrict the handle movement at 90°.
- Not possible for handles n° 4000-214 and -215.
- Non-handed. - Order separately.
SALTO BOTTOM HUNG OPEN IN WINDOWS E12.12.07
SALTO SAFE 4328
E12.12
-
7. Ordering table
Order example
A bottom hung window with overall vent width (Fb) 1350 mm and overall vent height (Fh) 1600 mm in which glass has a thickness of 16 mm and a weight of 40 kg/m2.
Note: to determine the precise vent weight see page E12.12.09.
Fittings to order: - 1x 4000-217 CYL - 1x 4328 - 1x 4028-30 - 1x 4328-35 - 3x 4208-143 - 3x 26140-750
Fb=750-1200 Fb=1200-1400
Fh = 900-1200
4000-217 CYL+ 4328+ 2x 4208-143+ 2x 26140-750
4000-217 CYL+ 4328+ 4328-35+ 3x 4208-143+ 3x 26140-750
Fh = 1200-1800
4000-217 CYL+ 4328+ 4028-30+ 2x 4208-143+ 2x 26140-750
4000-217 CYL+ 4328+ 4028-30+ 4328-35+ 3x 4208-143+ 3x 26140-750
Fh = 1800-2400
4000-217 CYL+ 4328+ 4028-30+ 4028-31+ 2x 4208-143+ 2x 26140-750
4000-217 CYL+ 4328+ 4028-30+ 4028-31+ 4328-35+ 3x 4208-143+ 3x 26140-750
E12.12.08 SALTO BOTTOM HUNG OPEN IN WINDOWS
SALTO SAFE 4328
E12.12
-
8. General information• The high security system SALTO SAFE 4328 can be used within the Fh/Fb sizes and weight limitations
indicated on the chart below. The handle height should not be less than 1/3 of the vent height. Technical advise should be sought when the sizes of your window are not shown in the chart.
• High security keeps must be fixed on the frame section with clamping plates and self-drilling screws. Stainless steel mushroom head bolts must be adjusted so that they run free within the security keep.
• High security system SALTO SAFE 4328 is made of non-corroding materials. The set should not be installed in corrosive atmospheres.
• Sobinco cannot be held responsible for the malfunctioning of the high security system SALTO SAFE 4328 if any non-Sobinco parts are used.
• Surface treatment of vent and frame must take place before assembly of the set, as this will affect the working of the gear.
• Glazing must be in accordance with national standards.
• The window and gear should be kept clean and lubricated in accordance with our maintenance instructions (copy available on request).
High security keeps
or
Glass thickness without air gapmm kg/m²10 2512 3014 3516 4018 4520 5022 5524 6026 6528 7030 7532 8034 8536 9038 9540 10042 105
max. 90 kg
Vent width Fb
Vent
hei
ght
Fh
SALTO BOTTOM HUNG OPEN IN WINDOWS E12.12.09
SALTO SAFE 4328
E12.12