· boxout projections etc. can be provided with aluminium formwork system. specification list unit...
TRANSCRIPT
ALUMINIUM FORMWORK
Advantages of Aluminum Forming System
▪ High quality finish
▪ Panels can be reused over 200 times
▪ Environmental Protection.
▪ Low using cost.
▪ Low waste
▪ Saving labor & Easy installation.
▪ Fast speed of construction.
▪ Light weight, easy to handle
▪ High stability and load bearing capacity.
▪ Safety & convenience.
▪ Recovery of high value.
▪ Precision design & compact joint
Aluminium Formwork System
Aluminium formwork system for entire building reduces construction time and cost.
Smooth surface finish is obtained which eliminates plastering entirely.
Provisions for door, window opening, plumbing lines, electrical conduits, sunken slabs, sunshade projections, window
boxout projections etc. can be provided with Aluminium formwork system.
SPECIFICATION
List Unit
Combined
Aluminium ( a6061-t6)
ALUMINIUM (A6061-T6)
MATERIAL
COMPOSITION
NORMAL MODULE
Specific Gravity- 2.7
Allowble Bending Stress Kg/cm²1.250
Young's Modulus Kg/cm²7.0 x 10²
INNER WALL PANEL SLAB CORNER & BEAM
SLAB PANEL & SUPPORT IN-OUT CORNER & HUNCH
ACCESSORY WALL TIE / ROUND PIN / WEDGE PIN
WALL PANEL
SLAB PANEL
2050 mm x 600
1200 mm x 600
VIEW / RESİMDESCRIPTION
AÇIKLAMA
Wall Panel
ACCESSORIES / AKSESUARLAR
Slab Panel
Porp Head
Slab Corner
Slab Inner Corner
Slab Outer Corner
Beam Bottom
Panel
VIEW / RESİMDESCRIPTION
AÇIKLAMA
Middle Beam
End Beam
Soldier Tie
Ineternal Corner
Angle
Waller-Bracket &
Square Pipe
Long Pin
Wall Tie
VIEW / RESİMDESCRIPTION
AÇIKLAMA
ACCESSORIES / AKSESUARLAR
PVC Sleeve
Pipe Support
Tie Rod
Wall & Slab
Platform
Wedge & Round
Pin
Bolt - Nut & Washer
FORMWORK
FORMWORK
