boysen color
TRANSCRIPT
Boysen® Permacoat™ Latex
Features:
DESCRIPTION: Boysen® Permacoat™ Latex Paint is a 100% acrylic latex paint with excellent hiding, durability and dirt pick-up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a lot on time, effort, worry and money.
PRINCIPAL USES: For interior and exterior such as concrete, stucco, bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.
PRACTICAL COVERAGE: 25-30 square meter / 4 liters / coat SURFACE DRY: Thirty (30) minutes DRY THROUGH: Two (2) hours DRY FILM THICKNESS: 1-1.5 mils/coat OVERCOATING INTERVAL: Allow one hour before recoating. THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter canAPPLICATION: paint brush, roller or airless spray. PACKAGING: 16-liter; 4-liter and 1-liter cans (white only)
AVAILABLE COLORS: B701 WhiteB702 Off WhiteB721 CreamB723 MoonlightB725 Bone IvoryB771 Tile RedB780 Chocolate Brown
COLORANTS: Use only Boysen® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory or Mix and Match™ pre-mixed colors. Do not use Hansa Yellow B-1466 and Toluidine Red B1407 for exterior applications.
Instructions
SURFACE PREPARATION:PAINTING SCHEDULE:1st Coat: Boysen® Permacoat™ Flat Latex #701 Putty: Boysen® Masonry Putty #7311 (interior use)
Boysen® Acrytex Cast™ #1711 (exterior use)
2nd & 3rd Coat: Boysen® Permacoat™ Flat Latex (any desired color)
Choose ColorFor technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.
Bone Ivory B-725
Chocolate Brown B-780
Cream B-721
Moonlight B-723
Off White B-702
Tile Red B-771
White B-701
Ashton Grey B-731
Basic Beige B-7522
Chocolate Kiss B-781
Mystery Winter B-752
Ojay B-772
Old Redwood B-774
Pawn Beige B-722
Pure Ivory B-7521
Stone Beige B-7520
Tulle White B-7501
Winter Morning B-7502
Yellow Ware B-761
Boysen® Healthy Home™ Odor-less Antibacterial Latex Paint
Features:
Boysen® Healthy Home™ is a odor-less, low VOC, premium acrylic, water-based interior coating with exclusive Microban® antibacterial protection to give extra defense against bacteria such as E. coli and Salmonella, as well as mildew and fungus.DESCRIPTION: Boysen® Healthy Home™ dries to a durable satin finish that makes it ideal for walls and ceilings in bedrooms, kitchens, bathrooms, as well as damp and humid areas where an added level of protection against microbes is desired. Microban® technology is incorporated into the paint at the manufacturing stage and does not wash or wear off for the duration of the paint’s service life.PRINCIPAL USES: Boysen® Healthy Home™ is the ideal choice for residences, medical facilities, nursing homes, schools, day care facilities, and food commissaries. For interior concrete and drywall surfaces.
PRACTICAL COVERAGE: 25-30 square meter / 4 liters / coatSURFACE DRY: Thirty (30) minutesDRY THROUGH: Two (2) hoursDRY FILM THICKNESS: 1-1.5 mils/coatOVERCOATING INTERVAL: Allow one hour before recoating.THINNING: Use as supplied.APPLICATION: paint brush, roller or airless sprayPACKAGING: 4-liter cansCOLORANTS: Use only factory or Mix-and-Match™ pre-mixed colors.
AVAILABLE COLORS:B7410 Hygienic WhiteB7420 Light TanB7430 Clean SlateB7440 Serene LakeB7442 Fresh AirB7450 FloraB7460 Shining OchreB7470 BloomB7472 Rosy
* Also available in B7415 Semi-Gloss Hygienic WhiteInstructions
SURFACE PREPARATION:New Masonry:Allow new masonry to dry 14 to 28 days under normal weather conditions before painting. Surfaces to be painted should be clean and dry, free from oil, grease, dust, dirt contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16
parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.Repainting:Remove all loose, scaling, flaking and peeling off paint using Boysen® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let dry. For chalking old paint, use Boysen® Chalk Blocker #7304 as primer. In case of mildew infestation, treat with fungicidal wash solution or bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry.
PAINTING SCHEDULE:Concrete1st Coat: Boysen® Permacoat™ Flat Latex #701Putty: Boysen® Masonry Putty #73112nd & 3rd Coat: Boysen® Healthy Home™
Drywall Surfaces1st Coat: Boysen® Permacoat™ Flat Latex #701Putty: Boysen® Gypsum Joint Compound #7112nd & 3rd Coat: Boysen® Healthy Home™ Choose ColorFor technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.
Bloom
Clean Slate
Flora
Fresh Air
Light Tan
Rosy
Serene Lake
Shining Ochre
Hygienic White
Titan Superflex™
Features:
Titan Superflex™ is a self-priming flexible coating that forms a durable film, which reflects ultra-violet light and prevents the passage of water and water vapor, recommended for both interior and exterior concrete surfaces. It cures to an adherent film on properly prepared surfaces capable of bridging hairline cracks on vertical walls. The smooth nature of the film minimizes dirt pick-up and ensures long term durability and color retention.
USE: Suitable for the protection and decoration of concrete surfaces.PROPERTIES: Appearance: EggshellCoverage: Approx. 18-22 sq.m. per 4 liters per coat (depending on surface porosity and method of
application).Drying time: Surface dry in one (1) hour. Recoat after three (3) hours under normal weather condition.
InstructionsSURFACE PREPARATION:
New Concrete:Allow new concrete to cure for at least four (4) weeks. All surfaces should be sound, clean, dry and free from loose and flaking material, dust, dirt, oil, efflorescence, laitance, and other contaminants. Treat with concrete neutralizer and let dry before dusting off the formed white crystalline deposits.
Old Concrete:Remove loose and flaking material on previously painted surfaces. Sand old paint in good condition, and then dust off before repainting.
APPLICATION & THINNING:
Number of Coats: Apply at least three (3) coats of Titan Superflex™ by brush, roller or airless spray. Decreasing the number of coats will reduce the paint performance.
Cleaning: Clean all tools and equipment after use with clean water. Thinning: Brush and roller: 0-5% water. The first coat may be thinned up to 10% on very absorbent
surfaces. Stir well before use. Airless spray: 0-10% water. Caution: Do not use when humidity is high as surface condensation (heavy moisture), will adversely
affect the paint performance. Choose ColorFor technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.
T-5101 Snow White
T-5102 Lemon Ice
T-5103 Ice Mist
T-5104 White Sand
T-5105 Hint of Vanilla
T-5106 Elusive White
T-5107 Nilla Vanilla
T-5108 Child of Heaven
T-5109 Kiara
T-5110 Little Dove
T-5111 Cotton Ball
T-5112 Casa Blanca
T-5113 Chapel Wall
T-5114 Petticoat
T-5115 Sugar Dust
T-5116 Bunny Cake
T-5117 Sphere
T-5118 Twill
T-5119 White Glove
T-5120 Pumice Stone
T-5121 Luna Moon
T-5122 Dove White
T-5123 Mystic Fog
T-5124 Bonaire
T-5125 Barely White
T-5126 White Kitten
T-5127 Shell Tint
T-5128 Just Above White
T-5129 Moon Drop
T-5130 White Fence
T-5131 Banister White
T-5132 Lady Nicole
T-5133 Italian Ice
T-5134 Ice Dream
T-5201 Puff Pink
T-5202 Sea Pearl
T-5203 Titan Peach
T-5204 Candy Cream
T-5205 Sweet Salmon
T-5206 Shore White
T-5209 Crisp Biscuit
T-5220 Calm Beige
T-5301 Whipple Blue
T-5302 Natural Gray
T-5303 Metal Ash
T-5304 Beige
T-5330 Dove Gray
T-5373 Terracotta
T-5401 Techno Blue
T-5402 Soft Lilac
T-5403 Mystic Blue
T-5404 Baby Blue
T-5405 Distant Blue
T-5406 Polaris Blue
T-5407 Denim Blue
T-5408 Feather Soft
T-5409 Evening Sea
T-5410 Fresh Water
T-5411 Blue Royale
T-5412 Mediterranean Blue
T-5413 Deep Sea
T-5414 Empire Violet
T-5415 Persian Violet
T-5501 Sour Green
T-5502 Icy Green
T-5503 Cool Green
T-5504 Apple green
T-5505 Aquamarine
T-5506 Sherwood
T-5507 Forest Line
T-5508 Green Grass
T-5509 Sierra Green
T-5510 Morning Bliss
T-5511 Green Leaf
T-5512 Bayville Green
T-5601 Beach Dust
T-5602 Candlebright
T-5603 Ivory
T-5604 Ripe Mango
T-5605 Shining Yellow
T-5606 Buttered Corn
T-5607 Sunny Days
T-5701 Short Lake
T-5702 Bright Coral
T-5703 Baby Candy
T-5704 Apple Blossom
T-5705 Sun Glaze
T-5706 Coral red
T-5707 Cottage Red
T-5708 Chili Pepper
T-5801 Mocha
T-5802 Brick Dust
T-5803 Clay Pot
Boysen® Quick Drying Enamel
Features:
DESCRIPTION: Boysen® Quick Drying Enamel is an alkyd type paint that provides great durability while being noted as a fast drying paint. It is formulated to give a tough, durable, beautiful and high build film on wood and metal. Its superior hiding, combined with an exceptionally high gloss level, leads to an excellent, long-lasting finished appearance.
PRINCIPAL USES: Superior for exterior and interior wood and metal surfaces.PRACTICAL COVERAGE: 20 - 25 square meter /4 liters /coatDRY FILM THICKNESS: 1.5 mils/coatSURFACE DRY: Five (5) hours maximumDRY THROUGH: Two (2) hoursOVERCOATING INTERVAL: Allow eight (8) hoursTHINNING: Use Boysen® Paint Thinner #0340 if necessaryAPPLICATION: By brush or roller
PACKAGING: 16-liter (white only), 4-liter, 1-liter and ¼-liter can
AVAILABLE COLORS:B600 White B621 Ivory B630 Silver Gray B632 Medium Gray B640 Royal Blue B642 Sky Blue B647 Delft Blue B650 Nile Green B651 Dark Green B656 Jade Green B658 Emerald Green B661 Lemon YellowB665 Caterpillar YellowB691 Flat BlackB690 BlackB685 Sammy Brown (Analux Yellowish)B681 MahoganyB680 Chocolate BrownB676 OrangeB673 MaroonB671 International Red
B670 Bright RedB683 Caramel Brown
COLORANTS : Use only Boysen® Oil Tinting Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed color. Do not use Prussian Blue B-2304, Hansa Yellow B-2319, and Bulletin Red B-2315 for exterior application.
Instructions
SURFACE PREPARATION:
Wood - Surface to be painted should be clean and dry, free from dust, dirt and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth, then dust off before painting.
If repainting, first remove all blistering, peeling and scaling paint by wire brushing or Boysen® Paint and Varnish Remover #141. Clean thoroughly prior to painting.
Metal - Wipe the surface with rag soaked in paint thinner to remove dust, dirt, grease, oil, wax and other foreign matter. For new G.I. sheets, etch the surface by applying 10% Boysen® Metal Etching Solution #71 (dilute 1 part of B-71 to 9 parts water).
If repainting, wire brush or scrape rusted metals and apply Boysen® Metal Etching Solution #71 to remove all rust. Let it stay for 10-15 minutes. Be sure to wash off surface thoroughly with water, letting it dry before applying paint. Prime immediately after drying.
PAINTING SCHEDULE:
WOOD1st Coat: Boysen® Flatwall Enamel #800Putty: Boysen® Plasolux Glazing Putty #3112nd & 3rd Coat: Boysen® Quick Dry Enamel (any desired color) METAL1st coat: Boysen® Red Oxide Primer #310, Boysen® Rust Off™ Primer Gray #330, or Boysen® Primeguard™ #4310 2nd & 3rd Coat: Boysen® Quick Dry Enamel (any desired color)Choose ColorFor technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.
Bright Red 670
Catterpillar Yellow 665
Chocolate Brown 680
Dark Green 651
Delft Blue 647
Emerald Green 658
International Red 671
Ivory 621
Jade Green 656
Lemon Yellow 661
Mahogany 681
Maroon 673
Medium Gray 631
Nile Green 650
Orange 676
Royal Blue 640
Sammy Brown 685
Silver Gray 630
Sky Blue 642
White 600
Caramel Brown 683