bp ampscomparison

4
BrainAmp series BrainAmp Standard BrainAmp DC BrainAmp ExG Number of Channels per Unit 32 32 8/16 Max. Number of Channels 256 256 - Channel Type / Reference referential channels / recording with one electrode as reference (unipolar) referential channels / recording with one electrode as reference (unipolar) >> BrainAmp ExG 8: 8 bipolar (sensors cannot be connected!) >> BrainAmp ExG 16: 16 bipolar OR 8 bipolar + 8 AUX (to connect sensors) Integrated Impedance Measurement yes, including reference and ground electrode yes, including reference and ground electrode yes Device suitable for MRI scanner room No No No Input Impedance for DC [MT] 10 switchable: 10 / 10000 switchable: 10 / 200000 Input Noise [µVpp] M 2 M 1 M 2 CMR [dB] N 90 N 110 N 100 High Pass [Hz] 0.016 (10 s) 0 in DC mode, 0.016 (10s) in AC mode, AC or DC software switchable 0 in DC mode, 0.016 (10s) in AC mode, AC or DC software switchable Low Pass [Hz] 1000 1000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit) 1000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit) Operating Range [mV] ± 3.28 switchable: ±3.28; ±16.384; ±327.68 switchable: ±3.28; ±16.384; ±327.68 Resolution [µV] 0.1 per bit switchable: 0.1; 0.5; 10 per bit switchable: 0.1; 0.5; 10 per bit Sampling Rate [kHz] 5 per channel 5 per channel 5 per channel A/D-Conversion [bit] 16 16 16 DC Offset Compatibility [mV] ± 300 ± 300 ± 300 Signal Transmission optical (via twin fiber optics) optical (via twin fiber optics) optical (via twin fiber optics) Deblocking Function Yes Yes Yes Blocking of unused Channels Yes Yes Yes Power Supply mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“) mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“) mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“) Power Consumption [mA] M 150, typical 7 in standby M 150, typical 7 in standby M 150, typical 7 in standby Computer Interface USB-Adapter (BUA, dualBUA) or PCI Adapter Card USB-Adapter (BUA, dualBUA) or PCI Adapter Card USB-Adapter (BUA, dualBUA) or PCI Adapter Card TTL Trigger Input [bit] 16 16 16 Medical Device yes yes yes Classification to MDD 93/42/EEC Class IIa Class IIa Class IIa CE Mark CE 0535 CE 0535 CE 0535 Electrical Safety according to IEC 60601-1; EMC tested, electrically safe according to IEC 60601-1; EMC tested, electrically safe according to IEC 60601-1; EMC tested, electrically safe Device Protection Class II II II Patient Safety (IEC 60601-1) applied part of type BF applied part of type BF applied part of type BF Dimensions H x W x D [mm] 68 x 160 x 187 68 x 160 x 187 68 x 160 x 187 Weight [kg] 1.1 1.1 1.1 Contact us at: Tel. +49 (0) 8105 733 84 0 or [email protected] At a glance: Brain Products Amplifiers in Comparison (page 1 of 4) Content created by Marketing Version .019 09/2012

Upload: gaudier

Post on 30-Nov-2015

50 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: BP AmpsComparison

BrainAmp seriesBrainAmp Standard BrainAmp DC BrainAmp ExG

Number of Channels per Unit 32 32 8/16

Max. Number of Channels 256 256 -

Channel Type / Referencereferential channels /recording with one electrode as reference (unipolar)

referential channels /recording with one electrode as reference (unipolar)

>> BrainAmp ExG 8: 8 bipolar (sensors cannot be connected!)

>> BrainAmp ExG 16: 16 bipolar OR 8 bipolar + 8 AUX (to connect sensors)

Integrated Impedance Measurement yes, including reference and ground electrode

yes, including reference and ground electrode

yes

Device suitable for MRI scanner room No No No

Input Impedance for DC [MT] 10 switchable: 10 / 10000 switchable: 10 / 200000

Input Noise [µVpp] M 2 M 1 M 2

CMR [dB] N 90 N 110 N 100

High Pass [Hz] 0.016 (10 s)0 in DC mode, 0.016 (10s) in AC mode,AC or DC software switchable

0 in DC mode, 0.016 (10s) in AC mode,AC or DC software switchable

Low Pass [Hz] 10001000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit)

1000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit)

Operating Range [mV] ± 3.28switchable: ±3.28; ±16.384; ±327.68

switchable: ±3.28; ±16.384; ±327.68

Resolution [µV] 0.1 per bit switchable: 0.1; 0.5; 10 per bit switchable: 0.1; 0.5; 10 per bit

Sampling Rate [kHz] 5 per channel 5 per channel 5 per channel

A/D-Conversion [bit] 16 16 16

DC Offset Compatibility [mV] ± 300 ± 300 ± 300

Signal Transmission optical (via twin fiber optics) optical (via twin fiber optics) optical (via twin fiber optics)

Deblocking Function Yes Yes Yes

Blocking of unused Channels Yes Yes Yes

Power Supply

mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“)

mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“)

mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“)

Power Consumption [mA] M 150, typical 7 in standby M 150, typical 7 in standby M 150, typical 7 in standby

Computer Interface USB-Adapter (BUA, dualBUA) orPCI Adapter Card

USB-Adapter (BUA, dualBUA) orPCI Adapter Card

USB-Adapter (BUA, dualBUA) orPCI Adapter Card

TTL Trigger Input [bit] 16 16 16

Medical Device yes yes yes

Classification to MDD 93/42/EEC Class IIa Class IIa Class IIa

CE Mark CE 0535 CE 0535 CE 0535

Electrical Safety according to IEC 60601-1;EMC tested, electrically safe

according to IEC 60601-1;EMC tested, electrically safe

according to IEC 60601-1;EMC tested, electrically safe

Device Protection Class II II II

Patient Safety (IEC 60601-1) applied part of type BF applied part of type BF applied part of type BF

Dimensions H x W x D [mm] 68 x 160 x 187 68 x 160 x 187 68 x 160 x 187

Weight [kg] 1.1 1.1 1.1

Contact us at:Tel. +49 (0) 8105 733 84 0 or [email protected]

At a glance: Brain Products Amplifiers in Comparison (page 1 of 4)

Content created by Marketing Version .019 09/2012

Page 2: BP AmpsComparison

actiCHamp (compared to BrainAmp Standard and DC)

At a glance: Brain Products Amplifiers in Comparison (page 2 of 4)

actiCHamp BrainAmp Standard BrainAmp DC

Number of (EEG) Channels per Unit 32 32 32

Max. Number of Channels 160 + 8 AUX 256 256

Channel Type / Reference

EEG channels: referential channels / internal Reference

AUX channels: bipolar, -4.8 V - 4.8 V

referential channels /recording with one electrode as reference (unipolar)

referential channels /recording with one electrode as reference (unipolar)

Integrated Impedance Measurement yesyes, including reference and ground electrode

yes, including reference and ground electrode

Device suitable for MRI scanner room No No No

Input Impedance for DC [MT] EEG: > 1000 AUX: > 40

10 switchable: 10 / 10000

Input Noise [µVpp] ≈ 2 (0.1 - 30 Hz) for EEG channels M 2 M 1

CMR [dB] > 100 N 90 N 110

High Pass [Hz] 0 (DC) 0.016 (10s)0 in DC mode, 0.016 (10s) in AC mode,AC or DC software switchable

Low Pass [Hz]EEG channels: 20000 or 8000 (depending on amp. version)AUX channels: 20000

10001000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit)

Resolution [µV] ≈ 0.048 per bit 0.1 per bit switchable: 0.1; 0.5; 10 per bit

Sampling Rate [kHz] in combination with BrainVision PyCorder (Python-based open source recording software)

16ch + 8 AUX: 100 32ch + 8 AUX: 50 64ch + 8 AUX: 25 96ch + 8 AUX: 10 128ch + 8 AUX: 10 160ch + 8 AUX: 10

combination not possible combination not possible

Sampling Rate [kHz] in combination with BrainVision Recorder 1.20 (commercial license)

16ch + 8 AUX: 100 32ch + 8 AUX: 100 64ch + 8 AUX: 50 96ch + 8 AUX: 25 128ch + 8 AUX: 25 160ch + 8 AUX: 25

5 per channel 5 per channel

A/D-Conversion / Digitization [bit] EEG and AUX channels: 24(one converter per channel)

16 16

Signal Transmission via USB 2.0 optical (via twin fiber optics) optical (via twin fiber optics)

Deblocking Function No Yes Yes

Power Supply rechargeable battery („actiPOWER“)

mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“)

mains power adapter („PS6 wr V-0“): 100-240 Volt AC, 50/60 Hz) or rechargeable battery („PowerPack“)

Computer Interface direct via USB 2.0USB-Adapter (BUA, dualBUA) orPCI Adapter Card

USB-Adapter (BUA, dualBUA) orPCI Adapter Card

TTL Trigger Input / Output [bit] 8 / 8 16 / - 16 / -

Medical Device no yes yes

Patient Safety (IEC 60601-1) acc. to IEC 60601-1, 3rd. Ed. applied part of type BF applied part of type BF

Device Protection Class II II II

Electrical Safety according to IEC 60601-1, 3rd. Ed.

according to IEC 60601-1;EMC tested, electrically safe

according to IEC 60601-1;EMC tested, electrically safe

CE Mark yes CE 0535 CE 0535

Dimensions H x W x D [mm] 68 x 160 x 187 68 x 160 x 187 68 x 160 x 187

Weight [kg] 1.1 1.1 1.1

Content created by Marketing Version .019 09/2012

The actiCHamp is intended to be used for research applications only and is not sold, designed or intended to be used as medical devices as defined in EU Directive 93/42/EEC, nor is it inten-ded to be used for other medical applications such as diagnosis or treatment of disease. The hardware is freely configurable. Brain Products shall not be liable for any use other than pure scientific and research applications. The actiCHamp hardware has been tested and certified as per the relevant EMC and electrical safety standards. A non-medical CE certificate is available on request.

Page 3: BP AmpsComparison

At a glance: Brain Products Amplifiers in Comparison (page 3 of 4)

BrainAmp MR seriesBrainAmp MR BrainAmp MR plus BrainAmp ExG MR

Number of Channels per Unit 32 32 8 or 16

Max. Number of Channels 128 (for use in fMRI); 256 (for use in other application fields)

128 (for use in fMRI); 256 (for use in other application fields)

-

Channel Type / Referencereferential channels /recording with one electrode as reference (unipolar)

referential channels /recording with one electrode as reference (unipolar)

>> BrainAmp ExG MR 8: 8 bipolar (sensors cannot be connected!)

>> BrainAmp ExG MR 16: 16 bipolar OR 8 bipolar + 8 AUX (to connect sensors)

Integrated Impedance Measurement yes, including reference and ground electrode

yes, including reference and ground electrode

yes

Device suitable for MRI scanner room

yes

> SIEMENS/PHILIPS: 1.5 - 7 T > GE: 1.5 - 3 T > Bruker: 4 T

yes

> SIEMENS/PHILIPS: 1.5 - 7 T > GE: 1.5 - 3 T > Bruker: 4 T

yes

> SIEMENS/PHILIPS: 1.5 - 7 T > GE: 1.5 - 3 T > Bruker: 4 T

Input Impedance for DC [MT] 10 switchable: 10 / 10000 10

Input Noise [µVpp] M 1 M 1 M 2

CMR [dB] N 90 N 110 N 100

High Pass [Hz] 0.016 / AC0 in DC mode, 0.016 (10s) in AC mode,AC or DC software switchable

0 in DC mode, 0.016 (10s) in AC mode,AC or DC software switchable

Low Pass [Hz] 2501000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit)

1000 / 250 (switchable for resolutions 0.1 μV / 0.5 μV per bit)

Operating Range [mV] ± 16.384switchable: ±3.28; ±16.384; ±327.68

switchable: ±3.28; ±16.384; ±327.68

Resolution [µV] 0.5 per bit switchable: 0.1; 0.5; 10 per bit switchable: 0.1; 0.5; 10 per bit

Sampling Rate [kHz] 5 per channel 5 per channel 5 per channel

A/D-Conversion [bit] 16 16 16

DC Offset Compatibility [mV] ± 300 ± 300 ± 300

Signal Transmission optical (via twin fiber optics) optical (via twin fiber optics) optical (via twin fiber optics)

Deblocking Function Yes Yes Yes

Blocking of unused Channels Yes Yes Yes

Power Supply rechargeable battery („PowerPack“)

rechargeable battery („PowerPack“)

rechargeable battery („PowerPack“)

Power Consumption [mA] M 150, typical 7 in standby M 150, typical 7 in standby M 150, typical 7 in standby

PC Interface USB-Adapter (BUA, dualBUA) orPCI Adapter Card

USB-Adapter (BUA, dualBUA) orPCI Adapter Card

USB-Adapter (BUA, dualBUA) orPCI Adapter Card

TTL Trigger Input [bit] 16 16 16

Medical Device Yes Yes Yes

Classification to MDD 93/42/EEC Class IIa Class IIa Class IIa

CE Mark CE 0535 CE 0535 CE 0535

Electrical Safetly according to IEC 60601-1;EMC tested, electrically safe

according to IEC 60601-1;EMC tested, electrically safe

according to IEC 60601-1;EMC tested, electrically safe

Device Protection Class II II II

Patient Safety (IEC 60601-1) applied part of type BF applied part of type BF applied part of type BF

Dimensions H x W x D [mm] 68 x 160 x 187 68 x 160 x 187 68 x 160 x 187

Weight [kg] 1,1 1,1 1,1

Contact us at:Tel. +49 (0) 8105 733 84 0 or [email protected]

Content created by Marketing Version .019 09/2012

Page 4: BP AmpsComparison

At a glance: Brain Products Amplifiers in Comparison (page 4 of 4)

* Using existing EEG files for teaching purposes with the BrainVision Analyzer Education or using the amplifier installed in the lab for training purposes, is the common procedure for out of the lab training sessions. We are offering the FirstAmp in combination with the Analyzer Education at a special low price. But it doesn‘t stop here! When you order a FirstAmp we will upgrade the number of licenses for your Analyzer Education to a total of 30, thus beating class size even in the most crowded environments! ** Versatility is the most distinctive feature of the Brain-Vision V-Amp. Favorably priced, the V-Amp is a valuable supplementation even for well-equipped laboratories. Biofeedback experiments, teaching courses as well as low budget projects will profit from the package including full BrainVision Recorder and Analyzer licenses shipped in a handy carrying box.

FirstAmp * / V-Amp **FirstAmp / V-Amp 8 channel V-Amp 16 channel

EEG Channels

Number of EEG Channels 8 plus Reference and Ground 16 plus Reference and Ground

Channel Type / Reference referential channels /recording with one electrode as reference (unipolar)

referential channels /recording with one electrode as reference (unipolar)

A/D-Conversion [µVpp] 24 24

Input Range [mV] ± 410 ± 410

Input Noise [µVpp] < 1 (0.5 - 30 Hz) < 1 (0.5 - 30 Hz)

Input Impedance to Ground for DC [MT] > 100 > 100

CMR 100 at 50 Hz 100 at 50 Hz

Sampling Rate [kHz] 2 2

Sampling Rate in High-Speed Mode (4 ch) [kHz] - 20

Resolution [µV / bit] ≈ 0.0489 ≈ 0.0489

Bandwidth [Hz] 0 (DC) - 500 (- 3 dB) 0 (DC) - 500 (- 3 dB)

Bandwidth in High-Speed Mode (4 ch) [Hz] - 0 (DC) - 4000 (- 3 dB)

AUX Channels

Number of AUX Channels 2 2

Channel Type bipolar bipolar

A/D-Conversion [µVpp] 24 24

Input Range [mV] ± 5 ± 5

Input Impedance to Ground for DC [MT] > 10 > 10

Differential Input Impedance for DC [MΩ] > 20 > 20

Sampling Rate [kHz] 2 2

Resolution [µV / bit] ≈ 1.19 ≈ 1.19

Bandwidth [Hz] 0 - 150 (- 3 dB) 0 - 150 (- 3 dB)

On-Board-Display TFT LCD 320 x 240 pixels; diagonal size of 3.5 inch

TFT LCD 320 x 240 pixels; diagonal size of 3.5 inch

No. of Trigger Inputs 9, TTL Level 9, TTL Level

Power Supply via USB via USB

Max. current in active mode during recording [mA] < 450, typical 370

Computer Interface USB 1.1 or higherfull speed mode with plug-and-play support

USB 1.1 or higherfull speed mode with plug-and-play support

Device suitable for MRI scanner room No No

Medical Device yes, conforms to MDD 93/42/EEC (and amended)

yes, conforms to MDD 93/42/EEC (and amended)

Patient Safety (IEC 60601-1) applied part of type BF applied part of type BF

Device Protection Class II II

CE Mark CE 0535 CE 0535

Dimensions H x W x D [mm] 170 x 125 x 30 170 x 125 x 30

Weight [kg] 0,400 0,430

Contact us at:Tel. +49 (0) 8105 733 84 0 or [email protected]

Content created by Marketing Version .019 09/2012