brake hoses - hydrofer - inicio freno.pdfbq2014-1009 real street legal stainless braided brake hoses...

6
Faulty Brake Hoses are an Invisible Safety Hazard Some Facts about brake hoses: 1. Average life of a brake hose is six years. 2. Brake hoses deteriorate from the inside as well as the outside. 3. Moisture is absorbed into brake fluid systems through brake hoses. 4. Contaminants in brake fluid act abrasively on the inner wall of brake hoses. 5. Brake hose reinforcing fabric deteriorates through expansion and moisture. 6. High operating temperatures in brake systems contribute to the deterioration of hoses. 7. Brake hoses swell with age and restrict flow. Experience the Convenience of Having DOT Brake Hoses Made to Your Requirements l Any hydraulic brake and clutch hose to suit any type of vehicle (In some cases a sample will be needed). l All hoses compliant to SAE J1401 and DOT Standard FMVSS106 l Every hose pressure tested to 3000 p.s.i. l Original equipment quality. Generally, all brake hoses on a vehicle deteriorate at the same rate ... Therefore, All HOSES SHOULD BE REPLACED if one is found to be faulty. Same Day Service* Quality Hoses Available When You Need Them Brake Hoses Made to Order! Authorized BrakeQuip Dealer Don’t Take The Risk - Replace and Be Safe! BQ2007-1009 Choose from OE Rubber or Stainless Steel Braided Hose. *In most cases.

Upload: letuong

Post on 12-Apr-2018

221 views

Category:

Documents


4 download

TRANSCRIPT

Faulty Brake Hoses are an Invisible Safety HazardSome Facts about brake hoses:1. Average life of a brake hose is six years.2. Brake hoses deteriorate from the inside as well as the outside.3. Moisture is absorbed into brake fluid systems through brake hoses.4. Contaminants in brake fluid act abrasively on the inner wall of brake hoses.5. Brake hose reinforcing fabric deteriorates through expansion and moisture.6. High operating temperatures in brake systems contribute to the deterioration of hoses.7. Brake hoses swell with age and restrict flow.

Experience the Convenience of Having DOT Brake Hoses Made to Your RequirementslAny hydraulic brake and clutch hose to suit any type of vehicle (In some cases a sample will be needed).

lAll hoses compliant to SAE J1401 and DOT Standard FMVSS106lEvery hose pressure tested to 3000 p.s.i.lOriginal equipment quality.

Generally, all brake hoses on a vehicle deteriorate at the same rate ... Therefore, All HOSES SHOULD BE REPLACED if one is found to be faulty.

Same Day Service*

Quality Hoses Available When You Need Them

Brake HosesMade to Order!

A u t h o r i z e d B r a k e Q u i p D e a l e r

Don’t Take The Risk - Replace and Be Safe! BQ2007-1009

Choose from OE Rubber or Stainless Steel Braided Hose.

* In most cases.

HYDROFER
Brakequip
HYDROFER, S.A Avda. de la Fama, 32 08940 CORNELLA DE LLOBREGAT (BCN) TEL. +34.93.475.20.00 FAX. +34.93.474.44.49 [email protected] www.hydrofer.com

BQ1201-0909

Motorcycle BrakeHosesMade to Order

Give your motorcycle the extreme look of Stainless braided hoses. All makes and models including Harley Davidson. Most fittings are Stainless Steel and polished to a Chrome finish. Multiple color options available.Choose from DOT compliant stainless steel braided lines or the original rubber hose..

Authorized BrakeQuip Dealer

aFully DOT CompliantaPressure TestedaOE Quality

Multiple color options available.

HYDROFER
Brakequip
HYDROFER, S.A Avda. de la Fama, 32 08940 CORNELLA DE LLOBREGAT (BCN) TEL. +34.93.475.20.00 FAX. +34.93.474.44.49 [email protected] www.hydrofer.com

Power Steering Hose Repair Service

Authorized BrakeQuip Dealer

Repair those failed power steering hoses instantly using the highest quality hose and unique fittings that allow the reusing

of the existing fitting. This feature allows the flexibility to economically repair most power steering hoses.

Hose Information

High Pressure Hose

This hose has a high temperature rating and is compatible with all power steering oils. High expansion for noise resistance. Complies with SAE J2050 standard.

Temperature Range: -40°F to + 300°F (-40°C to + 150°C)

Note: Restrictors are available if required.

Both high pressure and low pressure hoses available. This is important because if the high pressure hose has failed then the low pressure hose has also deteriorated and will need to be replaced at the same time.

Low Pressure Hose

This hose has a high temperature rating and is compatible with all power steering oils. It has a fabric cover to distinguish it and for flexibility. Complies with SAE J1019 standard.

Temperature Range: -40°F to + 300°F (-40°C to + 150°C)

BQ1202-1009

HYDROFER
Brakequip
HYDROFER, S.A Avda. de la Fama, 32 08940 CORNELLA DE LLOBREGAT (BCN) TEL. +34.93.475.20.00 FAX. +34.93.474.44.49 [email protected] www.hydrofer.com

Check Out These Unique Features aExceeds the latest DOT standards backed up by independent laboratory reports.

aSuitable for all applications including extreme racing.

aDesign allows high temperature operation and longer life.

aEvery hose is pressure tested to 3000 psi.

aHoses can be made while you wait or same day.

The Winning Combination of Quali ty, Performance & Convenience.

l

w w w . b r a k e q u i p . c o m

Experience the Benefits of Stainless Braided Brake HosesReduces braking distance during a panic stop.

Eliminates pedal sponginess under heavy braking.Gives immediate brake pedal response.Provides compatibility with all brake fluids.

D.O.T. FullyCompliant

Hose covers come in Clear, Red, Blue and Black.

The Utimate in Style and Performance

Authorized BrakeQuip Dealer

Flared for Joint Relief

Registered DOT Numbersj

NEW

Swiveling

o

B

an j

REAL DOT Conformancewith the Extreme Look

Hose hasDouble Laylines

“Mix and Match System”allows you to consolidate your inventory.

BQ1207-512

HYDROFER
Brakequip
HYDROFER, S.A Avda. de la Fama, 32 08940 CORNELLA DE LLOBREGAT (BCN) TEL. +34.93.475.20.00 FAX. +34.93.474.44.49 [email protected] www.hydrofer.com

LPMF01-M10x1

M10 x 1

LPMF02-M10x1

M10 x 1

LPMF05-M10x1

M10 x 1

LPMF08-M10x1

M10 x 1

LPMF09-M10x125

M10 x 1.25

LPMM01-M10x1

M10 x 1 M10 x 1

LPMM02-M10x1 LPMM03-M10x1

M10 x 1 M10 x 1.25

LPMM04-M10x125

M10 x 1

LPMM06-M10x1

LPS-SD-jiCCOLOR - BLACk

DPS 37o

LPS-SD-SAECOLOR - GOLD

DPS 45o

LPS-Si-jiCCOLOR - BLACk

Inverted 37o

LPS-Si-SAECOLOR - GOLD

Inverted 45o

LPS-T-DinCOLOR - SiLvER

Dual - DIN

LPS-T-jiCCOLOR - BLACk

Dual - 37o

LPS-T-SAECOLOR - GOLD

Dual - 45o

LPS-Li-SAECOLOR - GOLD

Inverted 45o

LPS-SD-DinCOLOR - SiLvER

DPS DIN 120o

LPB09SW-10M

10mm Swivel Banjo with

shell assembly

LPiM01-6

3/8 x 24NF

LPiM02-6

3/8 x 24NF

LPiM03-7

7/16 x 20NF

LPiM13-7

7/16 x 24NS

MiS

CLP11-6

3/8 x 24NFDouble 370

LP17-6

3/8 x 24NFDouble 450

LP33-6

3/8 x 24NFDouble 450

LP34-M10x1

M10 x 1Double 450

LP06-7

7/16 x 24NSDouble 45o

LP121

LP124 LPB01-10M

10mm Hole8mm Thick

LPB09-10M

10mm Hole10mm Thick

LPB12-10M

10mm Hole11.5mm Thick

BA

njO

BA

njO

LPB47-12M

12mm Hole10mm Thick

LPB448-7

11.1mm Hole10mm Thick

LPB455-10M

10mm Hole8mm Thick

LPiF01-6

3/8 x 24NF

LPiF02-7

7/16 x 24NSFEM

ALE

iM

P

MA

LE i

MPE

RiA

LFE

MA

LE M

ETR

iCM

ALE

MET

RiC

SEA

T S

TEM

S

CR

iMP

SH

ELL

BrakeQuip www.brakequip.com

LPiM19

1/8 x 27NPT

8mm Mount hole

BQ2014-1009

REAL Street Legal Stainless Braided Brake Hoses

D.O.T. FullyCompliant

INNOVATIVE SOLUTIONS FOR AUTOMOTIVE PLUMBING

A u t h o r i z e d B r a k e Q u i p D e a l e r

Experience the Benefits of Stainless Braided Brake HosesaReduces braking distance during a panic stop.

aEliminates pedal sponginess under heavy braking.

aGives immediate brake pedal response.

aProvides compatibility with all brake fluids.

Check Out These Unique FeaturesExceeds the latest DOT standards backed up byindependent laboratory reports.Suitable for all applications including extreme racing.Customize your hose with up to 32 different color combinations.Each fitting is of OE design so NO adaptors are necessary.Over 750 different brake hose fittings to choose from.Choose from trivalent zinc plating or stainless steel finishes.Design allows high temperature operation and longer life.Every hose is pressure tested to 3000 psi.Hoses can be made while you wait or same day.

Dress collars come in Silver, Black, Red, Blue, Purple, Gold, Yellow and Green.

Dress up your hoses for that custom look!Hose Colors come in Clear, Red, Blue and Black.

The ultimate in Style & Performance

The winning combination of quality, performance and convenience

HYDROFER
Brakequip
HYDROFER, S.A Avda. de la Fama, 32 08940 CORNELLA DE LLOBREGAT (BCN) TEL. +34.93.475.20.00 FAX. +34.93.474.44.49 [email protected] www.hydrofer.com