brass mill products - alaskan copper & brass company and alaskan

www.alaskancopper.com

Brass Mill Products

Brass Pipe, Rod, Bar,Sheet, Plate, Tubing,and Wire

ALASKAN COPPER & BRASS COMPANY


hen Alaskan Copper Works was founded as a marine coppersmithing company in 1913, one of its major activities was forming and brazing pipe and pipe fittings made from copper, brass and bronze, primarily for use in the Pacific Northwest shipbuilding industry.

Beginning in the 1920’s, many of the area’s growing process industries, such as pulp and paper, which had relied on wood stave and cast iron as corrosion resistant materials for their tanks and piping, welcomed the development of a new weldable alloy, silicon bronze. This alloy had special advantages in weight, cost and cor-rosion resistance. Alaskan Copper Works participated in the transition to this innovative metal and in the de-velopment of the welding techniques necessary for its proper fabrication.

In the 1930’s, alloys with even bet-ter corrosion resistance, such as the austenitic stainless steels, became available and quickly came into general use not only in the pulp and paper industry but also in the other process industries then beginning to develop, such as

History

W

petrochemical and food processing. Again, Alaskan Copper Works par-ticipated in the application of these new, advantageous materials and in the development of the welding and fabricating procedures required to maximize their usefulness.

Over the intervening years, improve-ments in our manufacturing capacities have seen the standard lengths of most pipe sizes increase from 4 feet to 10 feet and then to 20 feet. Die-formed smooth-flow

elbows began to be made in small sizes and gradually advanced to in-clude larger sizes and many radii and wall thicknesses. Other advances over the years have led to tees being made with smooth-drawn outlets, the devel-opment of many available choices in the types of stub ends for different services and our manufacturing of pipe and fittings to advanced specifications and in “exotic” alloys, including our qualification to produce fittings for the nuclear power industry.

As a result, today’s customers of the Stainless Products Division of Alaskan Copper Works benefit from the accumulated experience of one of the nation’s largest organizations devoted exclusively to the manu-facturing of pipe and pipe fittings in stainless steels, high-nickel alloys, duplex stainless alloys, copper-nickel alloys, aluminum, titanium, zirconium, copper and other weldable corrosion resistant alloys.

Alaskan Copper Works yesterday

Alasan Copper Works today.


Your Source for Corrosion Resistant Alloys Alaskan Copper & Brass Company combines the largest and most diverse inventory of alloys in the Pacific Northwest with the very latest in material processing equipment. Our goal is to continue to be a true “service center” for our customers. We provide accurate, rapid quotation services and the ability to deliver material on time, preprocessed if necessary to our customer’s exact specifications.

Northwest Owned and Operated Alaskan Copper & Brass Company has been owned and operated by the same family since 1913. In our Seattle, Portland and Canadian distribution facilities, the emphasis has always been on personal service and long term relationships with our customers. Contract terms, credit terms and special stocking programs can be negotiated locally, with people who understand the Northwest market and its customers.

State of the Art Processing Equipment Preprocessing of customer material has become more important every year due to more exacting quality require-ments in most industries. Alaskan has responded to that demand by investing heavily in new processing equipment. Minimize scrap and save inventory costs! Let Alaskan do your material processing.

Customer Service our Specialty Our sales staff is backed up by one of the most extensive information systems in the metals industry. Each salesperson has instantaneous access to all of our over 13,000 stocking items through a touch-input computer screen. Questions regarding the status of your order can be answered immediately, without a return call. We value your time as much as you do. This catalog covers sizes, weights and specifications of material for the commercial, military, marine, waste-water, petro-chemical, pharmaceutical, beverage and power industries. Call one of our informed and experienced salespeople for the rapid quotation response you expect in these competitive times.

ALASKAN COPPER & BRASS COMPANY P.O. Box 5067 P.O. Box 3546 225 North Road Portland, Oregon 97208-5067 Seattle, Washington 98124-3546 Coquitlam, B.C. V3K 3V7 2440 Southeast Raymond (97202-4638) 3223 Sixth Avenue South (98134-2105) Canada (503) 238-7171 (206) 623-5800 (604) 937-6620 Fax: (503) 238-6849 Fax: (206) 382-7335 Fax: (604) 937-0838 Toll Free: (800) 552-7661 Toll Free: (800) 552-7661 Toll Free: (800) 667-5456 E-MAIL: [email protected] E-MAIL: [email protected] E-MAIL: [email protected]

1


ALASKAN COPPER PROCESSING CAPABILITIES

Coil ProcessingAluminum, brass, copper, copper-nickel and stainless steel coil stock from .010” through 3/8“ thick and up to 96” wide are levelled and cut to length on Alaskan’s custom-made line.

ShearingPrecision shearing from light gauge to 3/8” thick copper alloy material, 1/2“ thick stainless steel and up to 3/4“ thick aluminum. Sheet or plate can be sheared in 20 foot continuous lengths using an adjustable backgauge. Plate up to 1” thick can be sheared in lengths up to 48”.

SawingAbrasive sawing of copper alloy material and stainless steel though 4” thick to close tolerance for rectangles and squares. Metal carbide sawing of aluminum plate through 6” thick. Plate up to 96” x 168” can be sawed in full lengths. Plate up to 12 foot long can be sawed with a +/- .005” inch tolerance.

Splice WeldingSimultaneous welding from both sides by automatic gas tungsten-arc process to achieve any required sheet size from stock material. The weld procedures and welder qualifications conform to Section IX of the ASME Boiler and Pressure Vessel Code. The resulting weld has minimum distortion and minimum reinforcement to allow easy form-ing such as rolling. Material up to 20 feet in length may be welded together.

Plasma BurningComputerized automatic plasma burning of any shape can be accom-plished. All corrosion resistant alloys can be cut up to 3” thick. Up to 96” x 240” material can be accommodated. A water table is utilized to keep slag and the heat affected zone to a minimum.

Do-All SawingAutomatic multiple cutting up to 16“ by 16” bar or 16” diameter round bar, rod or tubing.

Custom FabricationCustom fabrication of most industrial shapes can be performed by our affiliated company, ALASKAN COPPER WORKS. Work will be performed on a complete package basis including material or on a labor only basis utilizing the customer’s material. The entire engineer-ing and drafting department of ALASKAN COPPER WORKS is at your disposal, offering computerized design of heat transfer equipment, pressure vessels and tanks.

Complex shapes are cut by computerized plasma cutting tables.

Aluminum wet pump pressure vessel used to transfer fish from a ship’s hold to the dock.

Alaskan’s Cut-To-Length facility allows for ef-ficient use of sheet and plate material.

Order the size that is needed, not just “stan-dard” sizes.

2


41/64 21/32

43/64

7/8

13/16

45/64

3/4

23/32

11/16

47/64

5/8

49/64

9/16

25/32

33/64

51/64

17/32

53/64

35/64

27/32

37/64

55/64

19/32

57/64

39/64

29/32

1/2

59/647/16

61/64

3/8

31/32

5/16

63/64

9/32

29/64

1/4

15/32

7/32

3/16

27/64

5/32

13/32

9/64

25/64

1/8

23/64

7/64

11/32

3/32

21/64

5/64

19/64

1/16

17/64

3/64

15/64

1/32

13/64

1/64

11/64

1

Decimal Inch Centimeters Millimeters Millimeters Centimeters Decimal Inch

Table Showing Fractions, Decimals, Centimeters & Millimeters

Fractional Inch Fractional Inch

31/64

3

.0156 .0396 .3969 13.0969 1.310 .5156

.0312 .0792 .7938 13.4938 1.350 .5313

.0469 .1191 1.1906 13.8906 1.389 .5469

.0625 .1588 1.5875 14.2875 1.429 .5625

.0781 .1984 1.9844 14.6844 1.468 .5781

.0938 .2383 2.3813 15.0813 1.508 .5938

.1094 .2779 2.7781 15.4781 1.548 .6094.125 .3175 3.1750 15.8750 1.588 .625.1406 .3571 3.5719 16.2719 1.627 .6406.1563 .3970 3.9688 16.6688 1.667 .6563.1719 .4366 4.3656 17.0656 1.707 .6719.1875 .4763 4.7625 17.4625 1.746 .6875.2031 .5159 5.1594 17.8594 1.786 .7031.2188 .5558 5.5563 18.2563 1.826 .7188.2344 .5954 5.9531 18.6531 1.865 .7344.250 .6350 6.3500 19.0500 1.905 .750.2656 .6746 6.7469 19.4469 1.945 .7656.2813 .7145 7.1438 19.8438 1.984 .7812.2969 .7541 7.5406 20.2406 2.024 .7969.3125 .7938 7.9375 20.6375 2.064 .8125.3281 .8334 8.3344 21.0344 2.103 .8281.3438 .8733 8.7313 21.4313 2.143 .8438.3594 .9129 9.1281 21.8281 2.183 .8594.375 .9525 9.5250 22.2250 2.223 .875.3906 .9921 9.9219 22.6219 2.262 .8906.4063 1.032 10.3188 23.0188 2.302 .9063.4219 1.072 10.7156 23.4156 2.342 .9219.4375 1.111 11.1125 23.8125 2.381 .9375.4531 1.151 11.5094 24.2094 2.421 .9531.4688 1.191 11.9063 24.6063 2.461 .9688.4844 1.230 12.3031 25.0031 2.500 .9844.500 1.270 12.7000 25.4000 2.540 1.000


Brass Mill Products

4

Bra

ss

Brass PipeRed Brass Pipe, Regular & Extra Strong ........................................................................................................... 6

Brass Rod & BarHexagon Rod ....................................................................................................................................................... 7Square Rod .......................................................................................................................................................... 7Round Rod ........................................................................................................................................................... 8Rectangular Bar .................................................................................................................................................. 9-10Half Oval Bar ....................................................................................................................................................... 11Half Round Bar .................................................................................................................................................... 11

Brass Sheet & PlateNon-Leaded Sheet & Plate, 1/2 Hard .................................................................................................................. 12Non-Leaded Sheet & Coil, Soft .......................................................................................................................... 12Free Milling Engraver’s Sheet & Plate .............................................................................................................. 13Shim Brass ......................................................................................................................................................... 13

Brass TubingRound Seamless (Specified by OD and Gauge) ............................................................................................... 14Round Seamless (1/8 Wall) ................................................................................................................................. 15Polished Brass .................................................................................................................................................... 16

Brass WireSoft Wire .............................................................................................................................................................. 17

www.alaskancopper.com 5

When two dissimilar metals are placed in an electrolytic solu-tion, they develop characteristic negative potentials that cause a flow of current with resultant galvanic corrosion of one of the metals. The accompanying table presents the common metals and alloys in an order indicating which is the more likely to corrode under conditions favoring bi-metallic corrosion.

The metal in the higher position (near the anodic end) is more subject to corrosion than the one nearer the lower (cathodic) end. Thus, in seawater, zinc (4) coupled with copper (20) will corrode in preference to the copper, which is nearer the pro-tected cathodic end.

The relative positions of the metals in this table are approxima-tions based on the negative potentials developed in seawater and can vary under other conditions. Metals placed near each other in the table have little tendency to create conditions favoring galvanic corrosion. A thorough study of the poten-tials shows that they fall into groups of mutually inert metals. Under differing conditions they may shift positions within their own groups, but seldom shift from one group to another.

The negative potentials developed by the metals are deter-mined by the metals themselves, as well as by the composi-tion, oxygen content, temperature, and rate of flow of the solution. The rate of corrosion is affected by the voltage-dif-ference generated, the area of the cathodic metal and the physical distance between the metals in the solution, and in the final analysis is determined by the quantity of current generated.

The table should be used only as a guide to general tenden-cies in galvanic corrosion.

ANODIC ENDCorroded 1. Magnesium 2. Magnesium Alloys 3. Aluminum 4. Zinc 5. Aluminum (Alclad) 6. Cadmium 7. Cast Iron 8. Carbon Steel 9. Stainless Steel, Type 430 (Active)10. Ni-Resist11. Stainless Steel, Type 304 (Active)12. Stainless Steel, Type 410 (Active)13. Soft Solder14. Tin15. Lead16. Nickel (Active)17. Inconel (Active)18. Brasses19. Bronze20. Copper21. Nickel/Copper Alloys22. Stainless Steel, Type 430 (Passive)23. Nickel (Passive)24. Stainless Steel, Type 316 (Active)25. Inconel (Passive)26. Stainless Steel, Type 410 (Passive)27. Titanium28. Silver Solder29. Silver30. Stainless Steel, Type 304 (Passive)31. Monel Metal32. Stainless Steel, Type 316 (Passive)33. Graphite34. Gold35. PlatinumProtectedCATHODIC END

Galvanic Corrosion


Red Brass Pipe, Extra Strong, Sch 80■ UNS Designation Number: UNS C23000■ Nominal Chemicals: Copper 85.00%, Zinc 15.00%■ Average Physical Properties: Tensile 40,000 psi, Yield 18,000 psi, Machinability = 30■ Specifications: ASTM B 43, Temper H58 (Drawn General Purpose)■ Stocked in exact 12 foot lengths■ Red brass is the best quality pipe for general plumbing purposes. It has high corrosion resistance to water.

Brass Pipe

Red Brass Pipe, Regular, Sch 40

Dimensions are in inches. All weights are approximate.

■ UNS Designation Number: UNS C23000■ Nominal Chemicals: Copper 85.00%, Zinc 15.00%■ Average Physical Properties: Tensile 40,000 psi, Yield 18,000 psi, Machinability = 30■ Specifications: ASTM B 43, Temper H58 (Drawn General Purpose)■ Stocked in exact 12 & 20 foot lengths■ Red brass is the best quality pipe for general plumbing purposes. It has high corrosion resistance to water.

* UNS C33500 Yellow Brass

eziSS.P.SedistuO

retemaiD llaW tF/sbLtF2185H

rebmuNtraPtF0285H

rebmuNtraPtF2116O

rebmuNtraPtF02160

rebmuNtraP1/8 504. 260. 352. 5807511/4 045. 280. 744. 390751 2647213/8 576. 090. 726. 801751 8847211/2 048. 701. 439. 611751 6947213/4 050.1 411. 72.1 421751 105721

1 513.1 621. 87.1 231751 725721

1 1/4 066.1 641. 36.2 041751 535721

1 1/2 009.1 051. 31.3 851751 155721

2 573.2 651. 21.4 661751 965721

2 1/2 578.2 781. 99.5 471751

3 005.3 912. 65.8 806721 281751

3 1/2 000.4 052. 02.11 091751

4 005.4 052. 07.21 418782 502751

5 265.5 052. 08.51 312751

*6 526.6 052. 00.91

*01 57.01 563. 02.54

21 57.21 573. 03.55 552751

eziS.S.P.SedistuO


rebmuNtraP1/8 504. 001. 363. 3627511/4 045. 321. 116. 4301013/8 576. 721. 928. 9827511/2 048. 941. 32.1 7927513/4 050.1 751. 76.1 203751

1 513.1 281. 64.2 524832

1 1/4 066.1 491. 93.3 823751

1 1/2 009.1 302. 01.4 633751

2 573.2 122. 76.5 443751


■ UNS Designation Number: UNS C36000■ Nominal Chemicals: Copper 61.50%, Zinc 35.4%, Lead 3.1%■ Average Physical Properties: Tensile 45,000-57,000 psi, Yield 15,000-25,000 psi, Rockwell Hardness B40-B90 ■ Machinability = 100, Electrical Conductivity 26% IACS■ Specifications: ASTM B 16, Temper H02 (1/2 Hard)■ Stocked in 12 foot random lengths

Hexagon Square

Brass Rod & Bar

Hexagon & Square Free Cutting Half Hard Yellow Brass Rod


* UNS C33500 Yellow Brass

eziS.S.P.SedistuO


rebmuNtraP1/8 504. 001. 363. 3627511/4 045. 321. 116. 4301013/8 576. 721. 928. 9827511/2 048. 941. 32.1 7927513/4 050.1 751. 76.1 203751

1 513.1 281. 64.2 524832

1 1/4 066.1 491. 93.3 823751

1 1/2 009.1 302. 01.4 633751

2 573.2 122. 76.5 443751

eziS tF/sbL htgneL/sbLtraP

rebmuN1/8 850. 196. 5624513/ 61 031. 55.1 4034511/4 032. 67.2 6434515/ 61 063. 23.4 8834513/8 815. 22.6 7244511/2 129. 50.11 8054515/8 44.1 72.71 0454513/4 70.2 68.42 0954517/8 28.2 58.33 746451

1 86.3 12.44 986451

1 1/8 66.4 69.55 637451

1 1/4 67.5 70.96 877451

1 1/2 92.8 74.99 338451

1 3/4 82.11 4.531 388451

2 47.41 9.671 039451

2 1/2 30.32 4.672 089451

3 61.33 9.793 520551


rebmuN1/8 050. 995. 1272815/ 23 180. 379. 3816843/ 61 211. 53.1 9924511/4 991. 93.2 8334515/ 61 213. 47.3 0734513/8 944. 83.5 9144517/ 61 116. 33.7 1544511/2 897. 75.9 3944519/ 61 10.1 11.21 6667215/8 52.1 59.41 235451

11 / 61 15.1 01.81 6654513/4 08.1 45.12 285451

31 / 61 11.2 72.52 3164517/8 44.2 23.92 936451

51 / 61 08.2 06.33 536354

1 91.3 82.83 176451

1 1/ 61 06.3 22.34 207451

1 1/8 40.4 64.84 827451

1 1/4 99.4 28.95 067451

1 3/8 30.6 83.27 908451

1 1/2 81.7 41.68 528451

1 3/4 77.9 3.711 427531

2 67.21 1.351 229451

2 1/2 49.91 3.932 236721

3 17.82 5.443 710551

3 1/2 11.93 3.964 140551


Round Free Cutting Half Hard Yellow Brass Rod

* Stocked in 6 foot lengthsDimensions are in inches. All weights are approximate.

Brass Rod & Bar

■ UNS Designation Number: UNS C36000■ Nominal Chemicals: Copper 61.50%, Zinc 35.4%, Lead 3.1%■ Average Physical Properties: Tensile 45,000-57,000 psi, Yield 15,000-25,000 psi, Rockwell Hardness B40-B90 ■ Machinability = 100, Electrical Conductivity 26% IACS■ Specifications: ASTM B 16, Temper H02 (1/2 Hard)■ Stocked in 12 foot random lengths


rebmuN eziS tF/sbL htgneL/sbLtraP

rebmuN1/ 61 110. 231. 132451 1 3/ 61 80.4 69.84 4474513/ 23 520. 503. 942451 1 1/4 25.4 52.45 2574511/8 540. 245. 752451 1 3/8 74.5 46.56 4974515/ 23 170. 748. 372451 1 7/ 61 89.5 57.17 3741323/ 61 201. 22.1 182451 1 1/2 15.6 21.87 7184517/ 23 931. 66.1 213451 1 5/8 46.7 86.19 1484511/4 181. 71.2 023451 1 3/4 68.8 3.601 7684519/ 23 922. 57.2 453451 1 7/8 71.01 0.221 1984515/ 61 382. 93.3 263451 2 75.11 8.831 4194513/8 704. 88.4 104451 2 1/4 56.41 8.571 849451

31 / 23 874. 37.5 534451 2 3/8 23.61 8.591 4694517/ 61 455. 56.6 344451 2 1/2 80.81 0.712 2794511/2 327. 86.8 584451 2 3/4 88.12 6.262 8994519/ 61 619. 99.01 615451 3 40.62 5.213 9005515/8 31.1 65.31 425451 3 1/4 06.03 2.763 113962

11 / 61 73.1 24.61 855451 3 1/2 44.53 3.524 3305513/4 36.1 45.91 475451 3 3/4 86.04 2.884 950551

31 / 61 19.1 29.22 506451 4 82.64 4.555 7605517/8 22.2 85.62 126451 4 1/4 82.25 4.726 570551

51 / 61 45.2 25.03 556451 4 1/2 03.95 6.117 380551

1 98.2 27.43 366451 5 23.27 8.768 190551

1 1/ 61 72.3 91.93 796451 6 2.401 0521 601551

1 1/8 66.3 49.34 017451 *8 1.581 1111 937721

01 0.882 8271 064662


Rectangular Free Cutting Half Hard Yellow Brass Flat Bar

*C260 subject to availabilityDimensions are in inches. All weights are approximate.

■ UNS Designation Number: UNS C36000■ Nominal Chemicals: Copper 61.5%, Zinc 35.4%, Lead 3.1% ■ Average Physical Properties: Tensile 45,000 psi (min), Yield 17,000 psi■ Specifications: ASTM B 16, Temper H02 (1/2 Hard), Machinability = 100, Electrical Conductivity 26% IACS■ Stocked in 12 foot lengths■ Excellent machinability combined with good mechanical and corrosion resistant properties. Non-stock items readily available from plate stock-edge sheared or sawed.

Brass Rod & Bar

ssenkcihT)A(

htdiW)B(

tF/sbL htgneL/sbL traPrebmuN

ssenkcihT)A(

htdiW)B(

tF/sbL htgneL/sbL traPrebmuN

1/ 613/8 680. 30.1 *841551 3/ 61

3/8 952. 11.3 2715511/ 61

1/2 511. 83.1 *891551 3/ 611/2 543. 51.4 922551

1/ 613/4 371. 80.2 003551 3/ 61

5/8 234. 81.5 9725511/ 61 1 132. 77.2 *215132 3/ 61

3/4 815. 22.6 4335513/ 23

3/8 921. 55.1 651551 3/ 61 1 196. 92.8 7045513/ 23

1/2 371. 70.2 302551 3/ 61 1 1/4 368. 63.01 9945513/ 23

3/4 952. 11.3 813551 3/ 61 1 1/2 40.1 34.21 6955513/ 23 1 543. 51.4 317721 3/ 61 2 83.1 95.61 5865511/8

1/4 511. 83.1 031551 3/ 61 2 1/2 37.1 27.02 1426711/8

3/8 371. 70.2 461551 1/43/8 543. 51.4 081551

1/81/2 032. 67.2 112551 1/4

1/2 164. 35.5 7325511/8

5/8 882. 54.3 162551 1/45/8 675. 19.6 782551

1/83/4 543. 51.4 623551 1/4

3/4 196. 92.8 2435511/8

7/8 304. 48.4 096721 1/4 1 129. 50.11 5145511/8 1 164. 35.5 293551 1/4 1 1/4 51.1 18.31 4055511/8 1 1/4 675. 19.6 184551 1/4 1 1/2 83.1 95.61 1065511/8 1 1/2 196. 92.8 885551 1/4 1 3/4 16.1 43.91 8075511/8 1 3/4 308. 636.9 876565 1/4 2 48.1 01.22 3965511/8 2 129. 50.11 776551 1/4 2 1/2 03.2 46.72 2875511/8 2 1/2 51.1 18.31 477551 1/4 3 67.2 61.33 9385511/8 3 83.1 95.61 128551 1/4 4 68.3 73.64 8295511/8 4 48.1 01.22 019551 1/4 5 16.4 62.55 5006513/ 61

1/4 271. 60.2 033671 5/ 61 1 21.1 83.31 324551


Rectangular Free Cutting Half Hard Yellow Brass Flat Bar (continued)


Brass Rod & Bar

ssenkcihT)A(

htdiW)B(

tF/sbL htgnel/sbL traPrebmuN

ssenkcihT)A(

htdiW)B(

tF/sbL htgnel/sbL traPrebmuN

5/ 61 1 1/2 37.1 57.02 916551 5/8 2 06.4 52.55 2375513/8

1/2 196. 92.8 542551 5/8 3 19.6 78.28 3685513/8

5/8 468. 73.01 592551 3/4 1 67.2 61.33 5645513/8

3/4 40.1 34.21 053551 3/4 1 1/4 54.3 54.14 4555513/8 1 83.1 85.61 134551 3/4 1 1/2 51.4 47.94 1565513/8 1 1/4 37.1 27.02 025551 3/4 1 3/4 48.4 20.85 7289343/8 1 3/8 09.1 97.22 623834 3/4 2 35.5 13.66 0475513/8 1 1/2 70.2 68.42 726551 3/4 3 92.8 74.99 1785513/8 1 3/4 24.2 20.92 918934 3/4 4 50.11 6.231 2595513/8 2 67.2 61.33 617551 7/8 1 1/8 36.3 25.34 1482943/8 2 1/2 54.3 54.14 097551 1 1 1/4 16.4 62.55 2655513/8 3 51.4 47.94 748551 1 1 1/2 35.5 13.66 9665513/8 4 35.5 13.66 639551 1 1 3/4 54.6 63.77 3094441/2

3/4 83.1 85.61 980671 1 2 73.7 24.88 8575511/2 1 48.1 01.22 944551 1 3 50.11 6.231 9885511/2 1 1/4 03.2 46.72 835551 1 4 47.41 9.671 0695511/2 1 1/2 67.2 61.33 536551 1 1/4 2 12.9 5.011 6675511/2 2 86.3 12.44 427551 1 1/4 3 18.31 7.561 5006711/2 2 1/2 16.4 62.55 508551 1 1/4 4 24.81 0.122 8795511/2 3 35.5 13.66 558551 1 1/2 2 10.11 1.231 6895711/2 4 73.7 24.88 449551 1 1/2 2 1/2 58.31 2.661 3185515/8

3/4 37.1 57.02 863551 1 1/2 3 85.61 9.891 6097345/8 1 03.2 26.72 754551 1 1/2 4 01.22 2.562 6895515/8 1 1/4 88.2 65.43 645551 2 3 30.22 4.462 7985515/8 1 1/2 54.3 44.14 346551 2 4 84.92 8.353 499551


Half Oval Free Cutting Half Hard Yellow Brass Bar


Brass Rod & Bar

■ UNS Designation Number: UNS C36000■ Nominal Chemicals: Copper 61.5%, Zinc 35.4%, Lead 3.1%■ Average Physical Properties: Tensile 45,000 psi (min), Yield 17,000 psi■ Specifications: ASTM B 16, Temper H02 (1/2 Hard)■ Stocked in 12 foot lengths

■ UNS Designation Number: UNS C36000■ Nominal Chemicals: Copper 61.5%, Zinc 35.4%, Lead 3.1%■ Average Physical Properties: Tensile 45,000 psi (min), Yield 17,000 psi■ Specifications: ASTM B 16, Temper H02 (1/2 Hard)■ Stocked in 12 foot lengths

Half Round Free Cutting Half Hard Yellow Brass Bar

eziS tF/sbL htgneL/sbL rebmuNtraP1/8 x 1/2 181. 71.2 2236513/ 61 x 5/8 833. 50.4 2813923/ 61 x 3/4 663. 93.4 8436511/4 1x 246. 07.7 6536515/ 61 1x 1/4 10.1 31.21 4636515/ 61 1x 1/2 71.1 00.41 273651

eziS tF/sbL htgnel/sbL rebmuNtraP1/4 x 1/2 263. 43.4 0836515/ 61 x 5/8 665. 97.6 8936513/8 x 3/4 518. 87.9 304651


Non-Leaded Brass Sheet & Plate, Half Hard Temper


Brass Sheet & Plate

■ UNS Designation Number: UNS C26000■ Nominal Chemicals: Copper 70%, Zinc 30%■ Average Physical Properties: Tensile 62,000 psi, Hardness B68, Machinability = 30■ Specifications: ASTM B 36, Temper H02 (1/2 Hard)

■ UNS Designation Number: UNS C26000■ Nominal Chemicals: Copper 70%, Zinc 30%■ Average Physical Properties: Tensile 45,000, Hardness F70■ Specifications: ASTM B 36, Annealed

Non-Leaded Brass Sheet & Coil, Soft Temper

Gauge Thickness Size of Sheet Lbs/Sq Ft Part Number

36 .005 12 x COIL .220 157564

30 .010 12 x COIL .441 157572

26 .016 12 x COIL .705 157598

22 .025 12 x COIL 1.10 157629

18 .040 36 x 96 1.76 127404

16 .050 36 x 96 2.20 267709

14 .063 36 x 96 2.77 246850

Gauge Thickness Size of Sheet Lbs/Sq Ft Lbs/Sheet Part Number

26 .016 24 x 96 .705 11.28 127315

24 .020 36 x 96 .881 21.14 103036

22 .025 36 x 96 1.10 26.45 157784

20 .032 36 x 96 1.41 33.84 157865

18 .040 36 x 96 1.76 42.29 157881

16 .050 36 x 96 2.20 52.87 157904

14 .063 36 x 96 2.77 66.55 157920

11 .090 36 x 96 3.97 95.16 1579461/8 .125 36 x 96 5.51 132.2 1579623/16 .1875 36 x 96 8.26 198.2 1579881/4 .250 36 x 96 11.02 264.5 1580075/16 .3125 36 x 96 13.77 330.5 4201533/8 .375 36 x 96 16.52 396.5 4098221/2 .500 36 x 96 22.18 542.5 4191863/4 .750 36 x 96 33.05 793.2 158031

1 1.00 36 x 96 44.06 1057 432095



Brass Sheet & Plate

Free Milling Engraver’s Brass Sheet & Plate, Half Hard Temper

■ UNS Designation Numbers: UNS C35300 and UNS C35600■ Nominal Chemicals: Copper 62%, Zinc 35.5%, Lead 2.5%■ Average Physical Properties: Tensile 60,000, Hardness B65, Machinability = 100■ Specifications: ASTM B 121, Temper H02 (1/2 Hard)■ Leaded brass sheet is used where machining is important, but forming or bending is minor.

Shim Brass, In 6” x 100” Rolls■ UNS Designation Number: UNS C26000■ Nominal Chemicals: Copper 70%, Zinc 30%■ Average Physical Properties: Tensile 62,000 psi, Hardness B68, Machinability = 30■ Specifications: ASTM B 36, Temper H02 (1/2 Hard)

.oNkcotS ssenkcihTlamiceD tFqS/sbL ntC/sbL rebmuNtraP

1-SBC 100. 440. 381. 750851

2-SBC 200. 880. 573. 370851

3-SBC 300. 231. 455. 180851

5-SBC 500. 812. 719. 401851

6-SBC 600. 762. 21.1 211851

01-SBC 010. 144. 48.1 641851

51-SBC 510. 166. 57.2 451851

02-SBC 020. 188. 76.3 261851

Gauge Thickness Size of Sheet Lbs/Sq Ft Lbs/Sheet Part Number

18 .040 24 x 96 1.76 14.10 581802

14 .063 24 x 96 2.77 44.37 4028041/8 .125 24 x 96 5.51 88.11 2759063/16 .188 24 x 96 8.26 132.2 2879611/4 .250 24 x 96 11.01 176.2 2725763/8 .375 24 x 96 16.52 264.3 4023831/2 .500 24 x 96 22.26 356.2 2772095/8 .625 24 x 96 27.50 440.0 4023913/4 .750 24 x 96 33.05 528.8 157548

1 1.00 24 x 96 44.06 705.0 295362


Brass Tubing

Round Brass Seamless Tubing, Specified by OD and Gauge

■ UNS Designation Numbers: UNS C33000, C33500, C26000, C27200■ Nominal Chemicals: (C33000) Copper 66.50%, Zinc 33.00%, Lead .050% (C33500) Copper 63.50%, Zinc 36.00%, Lead .500% (C26000) Copper 70.00%, Zinc 30.00% (C27200) Copper 63.50%, Zinc 36.50%■ Average Physical Properties: Tensile 72,000 psi, Hardness B80, Machinability (260) = 30 (330) = 60■ Specifications: ASTM B 135, Temper H80 (Hard Drawn)■ Stocked in 12 foot lengths■ Round seamless brass tubing is a general utility tube that has many applications, including pump and power cylinders, liners and plumbing work. Alloy 330 is preferred where machinability (threading, cutting) is important while alloy 260 and 274 is used where formability (bending, cold working) is important.


OD Gauge Wall Lbs/FtLbs/Length

PartNumber OD Gauge Wall Lbs/Ft

Lbs/Length

PartNumber

1/8 22 .032 .033 .396 156013 3/4 22 .029 .250 3.00 1561105/32 22 .032 .050 .600 414398 3/4 19 .040 .344 4.13 1568853/16 22 .030 .054 .648 156021 13/16 22 .030 .270 3.24 1561283/16 19 .042 .071 .852 156770 7/8 22 .030 .292 3.50 1561361/4 22 .030 .076 .912 156039 15/16 21 .032 .313 3.76 1561441/4 19 .042 .101 1.21 156788 1 22 .030 .335 4.02 1561521/4 16 .065 .139 1.67 156796 1 19 .040 .466 5.59 1569085/16 22 .029 .098 1.18 156047 1 16 .065 .703 8.44 1569165/16 19 .042 .131 1.57 156801 1 1/4 19 .042 .587 7.04 1569245/16 16 .065 .185 2.22 299552 1 1/4 16 .065 .891 10.69 1569323/8 22 .030 .120 1.44 156055 1 1/2 19 .040 .676 8.11 1569403/8 19 .042 .162 1.94 156827 1 1/2 16 .065 1.08 12.95 1569583/8 16 .065 .233 2.80 156835 1 3/4 16 .065 1.27 15.20 1569667/16 22 .029 .142 1.70 421387 2 18 .049 1.11 13.27 2476607/16 16 .065 .280 3.36 404628 2 16 .065 1.46 17.46 1569821/2 22 .030 .163 1.96 156071 2 .109 2.39 33.40 4178171/2 19 .042 .223 2.68 156869 2 1/2 19 .042 1.14 13.68 2292561/2 16 .065 .327 3.92 156877 2 1/2 16 .065 1.83 21.97 1570199/16 22 .030 .185 2.22 156089 3 18 .049 1.67 20.04 1570279/16 22 .032 .185 2.22 465713 3 12 .109 3.65 43.76 1570435/8 22 .029 .207 2.48 156097 4 16 .065 2.96 35.52 15707711/16 22 .030 .228 2.74 156102


Brass Tubing

Round Brass Seamless Tubing, 1/8” Wall

■ UNS Designation Numbers: UNS C33000 and C33500■ Nominal Chemicals: (C33000) Copper 66.50%, Zinc 33.00%, Lead 0.50% (C33500) Copper 63.50%, Zinc 36.00%, Lead .500%■ Average Physical Properties: 5” ID and under Tensile 66,000 psi, Hardness B65 Over 5” ID Tensile 54,000 psi, Yield 40,000, Hardness B55 ■ Specifications: ASTM B 135, Temper H80 (Hard Drawn), H58 (Drawn General Purpose)■ Stocked in 12 foot lengths


DO DI llaW tF/sbL htgneL/sbL rebmuNtraP3/4

1/21/8 009. 08.01 924651

7/85/8

1/8 90.1 80.31 734651

1 3/41/8 72.1 42.51 544651

1 1/87/8

1/8 54.1 04.71 354651

1 1/4 1 1/8 36.1 65.91 164651

1 3/8 1 1/81/8 18.1 27.12 974651

1 1/2 1 1/41/8 99.1 88.32 784651

1 3/4 1 1/21/8 53.2 02.82 005651

2 1 3/41/8 17.2 25.23 815651

2 1/4 2 1/8 70.3 48.63 625651

2 1/2 2 1/41/8 44.3 82.14 435651

2 3/4 2 1/21/8 08.3 06.54 245651

3 2 3/41/8 61.4 29.94 055651

3 1/4 3 1/8 25.4 42.45 865651

3 1/2 3 1/41/8 88.4 65.85 675651

3 3/4 3 1/21/8 42.5 88.26 485651

4 1/4 4 1/8 79.5 46.17 706651

4 1/2 4 1/41/8 33.6 69.57 516651

5 1/4 5 1/8 14.7 29.88 946651

6 1/4 6 1/8 68.8 3.601 376651

7 1/4 7 1/8 13.01 7.321 186651

8 1/4 8 1/8 57.11 0.141 996651

01 1/4 01 1/8 56.41 8.571 407651

01 3/8 01 3/ 61 26.12 4.952 647651

21 3/8 21 3/ 61 76.62 0.023 457651

41 3/8 41 3/ 61 09.13 8.283 267651


Brass Tubing

Polished Brass Tubing

■ UNS Designation Number: UNS C27400■ Nominal Chemicals: Copper 62.50%, Zinc 37.50%■ Average Physical Properties: Tensile 74,000 ksi, Hardness B80, Machinability = 35■ Specifications: ASTM B 135, Temper H80 (Hard Drawn)■ Stocked in 12 foot lengths■ Polished round seamless tubing is often used in bar rail settings in restaurants, hotels, and home applications.■ Matching bar rail fittings are available upon request.


OD Wall Lbs/Ft Lbs/Length Part Number

1 .050 .559 6.71 421832

1 1/2 .050 .839 10.07 229230

2 .050 1.13 13.56 229248

16


eguaG retemaiD bL/tF LMRrebmuNtraP

sbL1rebmuNtraP

sbL5rebmuNtraP

sbL01rebmuNtraP

sbL51rebmuNtraP

sbL05rebmuNtraP

21 180. 00.35 498721 852304

41 460. 00.38 878721 331301 711301 490301

61 150. 0.531 191301 571301 951301

81 040. 0.312 579721 652301 032301 412301 638721

02 230. 0.043 113301 892301 272301

22 520. 0.045 353301 733301

42 020. 0.068 973301 177721

62 610. 0731 593301 557721

17

Soft Brass Wire

■ UNS Designation Number: UNS C26000■ Nominal Chemicals: Copper 70.00%, Zinc 30.00%■ Average Physical Properties: Tensile 50,000 psi■ Specifications: ASTM B 134, Soft Temper■ Best combination of strength and ductility of any brass. Excellent cold working properties.


Brass Wire


Notes


Specialized film reader and digital densitometer are used in inter-preting radiographic film.

Alaskan Quality is achieved through a rigorous program designed to get the right instructions to the right people, so that a product is fabricated correctly the first time. Since our beginning in 1913, the Alaskan Quality Program has been continually analyzed, revised and improved to meet the increas-ing challenges and complexity of specifications for piping, fittings, and custom fabrication. Our current Quality Program allows us to create an assignment of responsibility for en-gineering, drafting, layout, purchasing, scheduling, fabrication, examination, documentation and packaging. Thus our goal...conformance to specifica-tion...is consistently shared with you, the Purchaser. Alaskan’s facilities for radiogra-phy, liquid penetrant examination, ultrasonic gaging, hydrotesting and dimensional checking further confirm the quality that the program creates. Our program of proven procedures also enables the certification of parts and pressure vessels with the symbols of UM, U and U2 in accordance with Section VIII of the ASME Boiler and Pressure Vessel Code. Your purchase of Alaskan quality-crafted products will enable us to share with you our experience, knowledge and depend-ability.

Heat-treatment stress relieves fittings after forming.

Hydrotesting verifies pres-sure capabilities of pipe and tubing.

Geometric accuracy is checked on all Alaskan fittings.

Radiographic inspection checks the integrity of welds.


Did You Know?

Alaskan Copper & Brass Company and Alaskan Copper Works are the nation’s largest com-bination full service center and manufacturer of corrosion resistant alloy products.

The following publications from Alaskan Copper & Brass Company and Alaskan Copper Works are available upon request.

• Mill Products Stock ListCopper, Brass, Bronze,Aluminum and Stainless SteelSheet, Plate, Bar, PipeTubing, Fittings and Flanges

Alaskan Copper & Brass Company

• Stainless Steel Piping ProductsStainless Steel and OtherCorrosion Resistant MetalPipe, Flanges and Fittings

Fax (206) 382-7346

Alaskan Copper WorksStainless ProductsDivision

• Fabrication DivisionCorrosion Resistant Alloy HeatExchangers, Pressure Vessels, Tanks,Columns, Special Fabrications andPrefabricated Piping Systems

Fax (206) 382-4306

Fax (206) 382-7335

Fax (206) 382-7335

Alaskan Copper WorksFabrication Division

Alaskan Copper Works• Copper-Nickel Products

• Bosses and Welding Outlets

Copper-Nickel Sheet, Plate,Bar, Pipe, Tubing, Fittingsand Flanges

Branch Outlets Available inCopper-Nickel, Nickel-Alloys,Stainless Steel and OtherCorrosion Resistant Alloys

Alaskan Copper & Brass Company

Fax (206) 382-7335 Portland, Oregon Fax (503) 238-6849 Vancouver, B.C. FAX (604) 937-0838

ALASKAN COPPER WORKSP.O. BOX 3546SEATTLE, WASHINGTON 98124-35463200 SIXTH AVENUE SOUTH (98134-2106)PHONE (206) 623-5800

Fabrication Division:Fax (206) 382-4306Stainless Products Division:Fax (206) 382-7346

ALASKAN COPPER & BRASS COMPANYSeattle P.O. BOX 3546SEATTLE, WASHINGTON 98124-35463223 SIXTH AVENUE SOUTH (98134-2105)PHONE (206) 623-5800 FAX (206) 382-7335

Kent27402 72nd AVENUE SOUTH KENT, WASHINGTON 98032 PHONE (206) 623-5800 FAX (206) 382-7335

PortlandP.O. BOX 5067PORTLAND, OREGON 97208-50672440 SOUTHEAST RAYMOND (97202-4638)PHONE (503) 238-7171 FAX (503) 238-6849

San DiegoP.O. BOX 8236CHULA VISTA, CALIFORNIA 919121333 30th STREET, SUITE ASAN DIEGO, CALIFORNIA 92154-3404PHONE (619) 423-2546 FAX (619) 423-5310

Vancouver, B.C.225 NORTH ROAD COQUITLAM, B.C., CANADA V3K3V7PHONE (604) 937-6620 FAX (604) 937-0838

brass mill products - alaskan copper & brass company and alaskan

Documents