breezemax tdd ver.4.5 traps & alarms_080513

8/11/2019 BreezeMAX TDD Ver.4.5 Traps & Alarms_080513

1/82

BreezeMAX TDD

Traps and Alarms

SW Version 4.5May 2008P/N: 214981


2/82

ii Traps and Alarms

Document History

Document History

Topic Description Date Issued

New Product Release SW Version

4.0.1, October

2006

rbOduFailureOn/Off ,

rbAUHoldOverTxStoppedOn/Of

f Traps

New Traps SW Version

4.0.2, Decmber

2006

OduFailureOn and

AUHoldOverTxStoppedOn

Alarms

New Alarms SW Version

4.0.2, Decmber

2006

Service related traps

Section 5.8

Trap source of rbServiceDown,

rbServiceUp, rbServiceChanged and

rbServiceGeneralError has been

changed to BST/NPU.

SW Version

4.1.1, April

2007

rbOptimalRSSIConflict Trap

Section 5.1.9

New Trap SW Version

4.1.1, April

2007

BER Test Traps

Section 5.6.6, Section 5.6.7

BER Test is not supported by current

release

SW Version

4.1.1, April2007

rbAUHoldOverTxStoppedOn

and

rbAUHoldOverTxStoppedOff

Traps

Section 5.10.21,

Section 5.10.22

Traps are supported. SW Version

4.1.1, April

2007

rbLicenseFileLoadStatus Trap

Section 5.3.5

Updated list of Additional Info (added

192-195, updated description of 188).

SW Version

4.1.1, April2007

rbMbstLicenseChanged,

rbCPELicenseAssigned Traps

Section 5.3.6, Section 5.3.7

New Traps SW Version

4.1.1, April

2007

rbIPCSModeConfigurationError

Trap

Section 5.12.1

New Trap SW Version

4.1.1, April

2007


3/82

Traps and Alarms iii

Document History

rbBackupFileSwitchingModeMi

smatchSection 5.3.8

New Trap SW Version

4.1.1, April2007

rbSwSwitchFailed and

rbFreqBandDownloadResult

Traps Additional Info

Table 1-68

Added Additional Info 219 SW Version

4.1.1, April

2007

Micro Base Station Support for

all applicable traps

New product SW Version 4.2

June 2007

PF Server Related Traps

Section 5.13

New (not supported in current release) SW Version 4.2

June 2007

PFSereverKeepAliveTimeoutOn

Alarm

Section 6.28

New (not supported in current release) SW Version 4.2

June 2007

Binding Parameters Added description SW Version 4.5

March 2008

Traps and Alarm Sources

Sections 5.3.1

Updated SW Version 4.5

March 2008

Binding parameters

Sections 5.1.2, 5.1.4, 5.1.5,

5.1.9, 5.3.2, 5.3.4, 5.3.6, 5.3.7,

5.4.1, 5.4.2, 5.4.3, 5.4.4, 5.4.5,

5.4.6, 5.4.7, 5.5.1, 5.5.2, 5.5.5,

5.8.1, 5.8.2, 5.8.3, 5.8.4, 5.9.3,

5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8,

5.9.9, 5.13.1, 5.13.2

Updated details of binding parameters

are provided separately.

SW Version 4.5

March 2008

ODU Related Traps

Section 5.4

rbOduConfigId added as a binding

parameter to all ODU related traps

SW Version 4.5

March 2008

rbOduFailureOn Trap

Section 5.4.6

rbOduStatusMask added as binding

parameter to rbOduFailureOn trap.

SW Version 4.5

March 2008

rbBSPmTmLastFileName Trap

Section 5.3.9

New trap SW Version 4.5

March 2008

rbSwSwitchSucceed Trap

Section 5.6.5

Updated Additional Info SW Version 4.5

March 2008

rbGPSSysUpDateAndTime Trap

Section 5.10.23

New trap SW Version 4.5

March 2008



4/82

iv Traps and Alarms

Document History

Spectrum Analyzer Related

TrapsSection 5.11

New Trap SW Version 4.5

March 2008

PF Server Related Traps

Section 5.13

Applicable for NPU and supported by

release

SW Version 4.5

March 2008

ShelfCardExtractionOn Alarm

Section 6.4

Updated Alarm sources SW Version 4.5

March 2008

PFSereverKeepAliveTimeoutOn

Alarm

Section 6.28

Applicable for NPU and supported by

release

SW Version 4.5

March 2008



5/82

Traps and Alarms i

Legal Rights

Legal Rights

Copyright 2007 Alvarion Ltd. All rights reserved.

The material contained herein is proprietary, privileged, and confidential and

owned by Alvarion or its third party licensors. No disclosure thereof shall be made

to third parties without the express written permission of Alvarion Ltd.

Alvarion Ltd. reserves the right to alter the equipment specifications and

descriptions in this publication without prior notice. No part of this publication

shall be deemed to be part of any contract or warranty unless specifically

incorporated by reference into such contract or warranty.

Trade Names

Alvarion

, BreezeCOM

, WALKair

, WALKnet

, BreezeNET

, BreezeACCESS

,BreezeMANAGE, BreezeLINK, BreezeConfig, BreezeMAX, AlvariSTAR,

BreezeLITE, AlvariCRAFT, MGW, eMGW, and/or other products and/or

services referenced here in are either registered trademarks, trademarks or

service marks of Alvarion Ltd.

All other names are or may be the trademarks of their respective owners.

Statement of Conditions

The information contained in this manual is subject to change without notice.

Alvarion Ltd. shall not be liable for errors contained herein or for incidental orconsequential damages in connection with the furnishing, performance, or use of

this manual or equipment supplied with it.

Warranties and Disclaimers

All Alvarion Ltd. ("Alvarion") products purchased from Alvarion or through any of

Alvarion's authorized resellers are subject to the following warranty and product

liability terms and conditions.

Exclusive Warranty

(a) Alvarion warrants that the Product hardware it supplies and the tangible

media on which any software is installed, under normal use and conditions, will

be free from significant defects in materials and workmanship for a period of

fourteen (14) months from the date of shipment of a given Product to Purchaser

(the "Warranty Period"). Alvarion will, at its sole option and as Purchaser's sole

remedy, repair or replace any defective Product in accordance with Alvarion'

standard R&R procedure.

(b) With respect to the Firmware, Alvarion warrants the correct functionality

according to the attached documentation, for a period of fourteen (14) month from


6/82

ii Traps and Alarms

Legal Rights

invoice date (the "Warranty Period")". During the Warranty Period, Alvarion may

release to its Customers firmware updates, which include additional performance

improvements and/or bug fixes, upon availability (the "Warranty"). Bug fixes,

temporary patches and/or workarounds may be supplied as Firmware updates.

Additional hardware, if required, to install or use Firmware updates must be

purchased by the Customer. Alvarion will be obligated to support solely the two (2)

most recent Software major releases.

ALVARION SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING

AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT

DOES NOT EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD

PERSON'S MISUSE, NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER

TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE

BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE,

LIGHTNING OR OTHER HAZARD.

Disclaimer

(a) The Software is sold on an "AS IS" basis. Alvarion, its affiliates or its licensors

MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED,

WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING

DOCUMENTATION. ALVARION SPECIFICALLY DISCLAIMS ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE.

UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO

PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT

DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE IN

APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF

PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE

PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). HIGH

RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF

ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING

FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR

FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR

TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR

OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL

HAZARD. ALVARION SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.

(b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS

WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE

PURCHASE PRICE AS SPECIFIED ABOVE, AT ALVARION'S OPTION. TO THE

FULLEST EXTENT ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET

FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER


7/82

Traps and Alarms iii

Legal Rights

WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY

OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT

LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY,CORRESPONDENCE WITH DESCRIPTION, NON-INFRINGEMENT, AND

ACCURACY OF INFORMATION GENERATED. ALL OF WHICH ARE EXPRESSLY

DISCLAIMED. ALVARION' WARRANTIES HEREIN RUN ONLY TO PURCHASER,

AND ARE NOT EXTENDED TO ANY THIRD PARTIES. ALVARION NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY

OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE OR USE OF ITS PRODUCTS.

Limitation of Liability

(a) ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRDPARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF

BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR

CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER

BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY

OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR

OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

(b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL

THE LIABILITY FOR DAMAGES HEREUNDER OF ALVARION OR ITS EMPLOYEES

OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BYPURCHASER, NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL

PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID

FOR THAT PRODUCT BY THAT PARTY (EXCEPT IN THE CASE OF A BREACH OF

A PARTY'S CONFIDENTIALITY OBLIGATIONS).


8/82

iv Traps and Alarms

Legal Rights

Important Notice

This user manual is delivered subject to the following conditions and restrictions:

This manual contains proprietary information belonging to Alvarion Ltd. Such

information is supplied solely for the purpose of assisting properly authorized

users of the respective Alvarion products.

No part of its contents may be used for any other purpose, disclosed to any

person or firm or reproduced by any means, electronic and mechanical,

without the express prior written permission of Alvarion Ltd.

The text and graphics are for the purpose of illustration and reference only.

The specifications on which they are based are subject to change withoutnotice.

The software described in this document is furnished under a license. The

software may be used or copied only in accordance with the terms of that

license.

Information in this document is subject to change without notice. Corporate

and individual names and data used in examples herein are fictitious unless

otherwise noted.

Alvarion Ltd. reserves the right to alter the equipment specifications and

descriptions in this publication without prior notice. No part of this

publication shall be deemed to be part of any contract or warranty unless

specifically incorporated by reference into such contract or warranty.

The information contained herein is merely descriptive in nature, and does not

constitute an offer for the sale of the product described herein.

Any changes or modifications of equipment, including opening of the

equipment not expressly approved by Alvarion Ltd. will void equipmentwarranty and any repair thereafter shall be charged for. It could also void the

user's authority to operate the equipment.


9/82

Contents

Chapter 1 - Traps and Alarms Structure..................................................1

Chapter 2 - Traps and Alarms Sources ....................................................1

Chapter 3 - Traps and Alarms Severities.................................................3

Chapter 4 - Trap/Alarm Categories ..........................................................4

Chapter 5 - BreezeMAX Traps .................................................................. 5

5.1 General Traps ............................................................................................................5

5.1.1 rbResetOn Trap................................................................................................5

5.1.2 rbDiagnosticsHwFaultOn Trap .........................................................................6

5.1.3 rbDiagnosticsHwFaultOff Trap .........................................................................7

5.1.4 rbMonitorAccessOn Trap .................................................................................8

5.1.5 rbMonitorAccessOff Trap .................................................................................8

5.1.6 rbAuNetworkEntryStatus Trap..........................................................................9

5.1.7 rbModeConflictOn Trap....................................................................................9

5.1.8 rbModeConflictOff Trap..................................................................................10

5.1.9 rbOptimalRSSIConflict Trap...........................................................................11

5.2 Chassis/Micro Base Station Related Traps...........................................................11

5.2.1 rbShelfCardExtractionOn Trap.......................................................................11

5.2.2 rbShelfCardInsertionOn Trap .........................................................................11

5.2.3 rbShelfPeripheralEquipmentFaultOn Trap .....................................................13

5.2.4 rbShelfPeripheralEquipmentFaultOff Trap .....................................................13

5.2.5 rbShelfEnvParamFaultOn Trap......................................................................14

5.2.6 rbShelfEnvParamFaultOff Trap......................................................................15

5.3 NPU/Micro Base Station Related Traps .................................................................15


10/82

vi Traps and Alarms

Contents

5.3.1 rbConfigurationChanged Trap........................................................................15

5.3.2 rbParameterSetFailure Trap...........................................................................16

5.3.3 rbMbstLicense Trap........................................................................................18

5.3.4 rbMbstCPEQuantityExceed Trap ...................................................................19

5.3.5 rbLicenseFileLoadStatus Trap .......................................................................19

5.3.6 rbMbstLicenseChanged Trap.........................................................................20

5.3.7 rbCPELicenseAssigned Trap .........................................................................20

5.3.8 rbBackupFileSwitchingModeMismatch Trap ..................................................20

5.3.9 rbLastPmTmFileName Trap...........................................................................21

5.4 ODU Related Traps ..................................................................................................21

5.4.1 rbOduCommErrorOn Trap..............................................................................21

5.4.2 rbOduCommErrorOff Trap..............................................................................21

5.4.3 rbOduBandMissmatchOn Trap.......................................................................23

5.4.4 rbOduBandMissmatchOff Trap.......................................................................23

5.4.5 rbOduPowerMissmatch Trap..........................................................................24

5.4.6 rbOduFailureOn Trap .....................................................................................24

5.4.7 rbOduFailureOff Trap .....................................................................................26

5.5 SU Related Traps .....................................................................................................26

5.5.1 rbSuMaxTxPowerReached Trap....................................................................26

5.5.2 rbSuMinTxPowerReached Trap.....................................................................26

5.5.3 rbSuNetworkEntryStatus Trap........................................................................27

5.5.4 rbSuLicense Trap...........................................................................................27

5.5.5 rbSuDuplicateName Trap...............................................................................29

5.6 Software Download and BER Test Related Traps ................................................29

5.6.1 rbSwDownloadStart Trap ...............................................................................29

5.6.2 rbSwDownloadEnd Trap ................................................................................29


11/82

Traps and Alarms vii

Contents

5.6.3 rbSwDownloadError Trap...............................................................................30

5.6.4 rbSwSwitchFailed Trap ..................................................................................32

5.6.5 rbSwSwitchSucceed Trap ..............................................................................32

5.6.6 rbBERTestFinished Trap................................................................................32

5.6.7 rbBERTestStarted Trap..................................................................................34

5.6.8 rbSwFileConflict Trap.....................................................................................34

5.7 File Download Related Traps..................................................................................34

5.7.1 rbXMLDownloadResult Trap ..........................................................................34

5.7.2 rbFreqBandDownloadResult Trap..................................................................35

5.8 Service Related Traps .............................................................................................35

5.8.1 rbServiceDown Trap.......................................................................................35

5.8.2 rbServiceUp Trap ...........................................................................................36

5.8.3 rbServiceChanged Trap .................................................................................36

5.8.4 rbServiceGeneralError Trap...........................................................................37

5.8.5 rbNetworkingError Trap..................................................................................38

5.9 RADIUSs Related Traps ..........................................................................................38

5.9.1 rbSwitchedAuthenticationServer Trap............................................................38

5.9.2 rbSwitchedAccountingServer Trap.................................................................38

5.9.3 rbServiceEstablishmentFailure Trap ..............................................................39

5.9.4 rbUserAuthenticationTimeout Trap ................................................................40

5.9.5 rbUserAuthenticationReject Trap ...................................................................40

5.9.6 rbAuthenticationServerKeepAliveTimeoutOn Trap ........................................ 40

5.9.7 rbAuthenticationServerKeepAliveTimeoutOff Trap ........................................41

5.9.8 rbAccountingServerKeepAliveTimeoutOn Trap .............................................41

5.9.9 rbAccountingServerKeepAliveTimeoutOff Trap .............................................41

5.10 GPS Related Traps ..................................................................................................42


12/82

viii Traps and Alarms

Contents

5.10.1 rbExternal1PPSFailureOn Trap......................................................................42

5.10.2 rbExternal1PPSFailureOff Trap......................................................................42

5.10.3 rbInternal1PPSFailureOn Trap.......................................................................42

5.10.4 rbInternal1PPSFailureOff Trap.......................................................................43

5.10.5 rbExternal16MHzFailureOn Trap ...................................................................43

5.10.6 rbExternal16MHzFailureOff Trap ...................................................................43

5.10.7 rbInternal16MHzFailureOn Trap.....................................................................44

5.10.8 rbInternal16MHzFailureOff Trap.....................................................................44

5.10.9 rbGPSComFailureOn Trap.............................................................................44

5.10.10 rbGPSComFailureOff Trap.............................................................................45

5.10.11 rbGPSHealthyFailureOn Trap ........................................................................45

5.10.12 rbGPSHealthyFailureOff Trap ........................................................................45

5.10.13 rbMin4SatSyncFailureOn Trap.......................................................................46

5.10.14 rbMin4SatSyncFailureOff Trap.......................................................................46

5.10.15 rbAUExternal1PPSFailureOn Trap.................................................................46

5.10.16 rbAUExternal1PPSFailureOff Trap.................................................................47

5.10.17 rbAUHoldOverEnteredOn Trap......................................................................47

5.10.18 rbAUHoldOverEnteredOff Trap......................................................................47

5.10.19 rbAUHoldOverTimeoutPassedOn Trap..........................................................48

5.10.20 rbAUHoldOverTimeoutPassedOff Trap..........................................................48

5.10.21 rbAUHoldOverTxStoppedOn Trap .................................................................48

5.10.22 rbAUHoldOverTStoppedOff Trap...................................................................49

5.10.23 rbGPSSysUpDateAndTime Trap....................................................................49

5.11 Spectrum Analyzer Related Traps .........................................................................49

5.11.1 rbAUSpecAnalyzerTestStatus Trap ...............................................................49

5.12 IP CS Mode Configuration Related Traps..............................................................50


13/82

Traps and Alarms ix

Contents

5.12.1 rbIPCSModeConfigurationError Trap.............................................................50

5.13 PF Server Related Traps ......................................................................................... 51

5.13.1 rbPFSereverKeepAliveTimeoutOn Trap.........................................................51

5.13.2 rbPFSereverKeepAliveTimeoutOff Trap.........................................................51

5.14 MIB II Traps .............................................................................................................. 52

5.14.1 coldStart Trap.................................................................................................52

5.14.2 warmStart Trap...............................................................................................52

5.14.3 linkDown Trap ................................................................................................52

5.14.4 linkUp Trap.....................................................................................................53

5.14.5 authenticationFailure Trap..............................................................................54


14/82

x Traps and Alarms

Contents

Chapter 6 - Active Alarms ......................................................................54

6.1 DiagnosticsHwFaul tOn Alarm ................................................................................54

6.2 MonitorAccessOn Alarm.........................................................................................55

6.3 ModeConfl ictOn Alarm............................................................................................55

6.4 ShelfCardExt ract ionOn Alarm ................................................................................55

6.5 ShelfPeripheralEquipmentFaultOn Alarm .............................................................56

6.6 ShelfEnvParamFaultOn Alarm................................................................................56

6.7 OduCommErrorOn Alarm .......................................................................................57

6.8 OduBandMissmatchOn Alarm................................................................................57

6.9 OduFailureOn Alarm ...............................................................................................57

6.10 SwDownloadStart Alarm .........................................................................................58

6.11 SwDownloadError Alarm ........................................................................................58

6.12 SwSwitchFailed Alarm ............................................................................................58

6.13 AuthenticationServerKeepAliveTimeoutOn Alarm...............................................59

6.14 AccountingServerKeepAliveTimeoutOn Alarm ....................................................59

6.15 LinkDown Alarm ......................................................................................................59

6.16 AuthenticationFailure Alarm...................................................................................60

6.17 External1PPSFailureOn Alarm ...............................................................................60

6.18 Internal1PPSFailureOn Alarm.................................................................................61

6.19 External16MHzFailureOn Alarm .............................................................................61

6.20 Internal16MHzFailureOn Alarm ..............................................................................62

6.21 GPSComFailureOn Alarm .......................................................................................62

6.22 GPSHealthyFailureFailureOn Alarm ......................................................................62

6.23 Min4SatSyncFailureFailureOn Alarm.....................................................................63

6.24 AUExternal1PPSFailureOn Alarm ..........................................................................63

6.25 AUHoldOverEnteredOn Alarm................................................................................63


15/82

Traps and Alarms xi

Contents

6.26 AUHoldOverTimeoutPassedOn Alarm...................................................................64

6.27 AUHoldOverTxStoppedOn Alarm...........................................................................64

6.28 PFSereverKeepAliveTimeoutOn Alarm ................................................................. 65


16/82

xii Traps and Alarms

Contents


17/82

Traps and Alarms Structure

Traps and Alarms 1

1 Traps and Alarms Structure

A BreezeMAX trap/alarm includes the following variables:

2 Traps and Alarms Sources

The trap/alarm source indicates the device that originated the trap/alarm. Each

trap/alarm message should include the full hierarchy of its source.

Possible sources and associated information are:

NPU: (Slot#=5).

AU:


18/82

2 Traps and Alarms

Traps and Alarms Sources

AVU FAN: (Slot# = 1-10)

Service: Identified through binding parameters rather than the source. The

binding parameters used to identify a Service are: Service Index, Service

Name, Subscriber Index, and Subscriber ID.

The following are used as Sources only for the rbConfigurationChanged TRAP:

BTS Sector:

ODU:

Channel:

Subscriber:

Service:

Priority Classifier:

QoS Profile:

Forwarding Rule:

Service Profile:

Layer 2 Filtering Rule:

Layer 3/4 Filtering Rule:

Figure 1-1: Base Station's Chassis Slots Assignment


19/82

Traps and Alarms Severities

Traps and Alarms 3

Interface Filter:

Filtering Rule:

MAC Address Deny List:

Autorized Manager:

Traps:

Authentication Server:

Accounting Server: ,

Voice Domain:

PF Server:

PF General:

Service Group:

3 Traps and Alarms Severities

The trap/alarm severity level indicates how the capability of the managed object

has been affected. It represents the severity of the alarm, as perceived by the

managed object.

The default severity levels defined in the system, ordered from most severe to least

severe, are:

Table 1-2: Trap/Alarm Severit ies

Severity Description

Critical Indicates that a service affecting condition has occurred and an immediate

corrective action is required (e.g. when a managed object becomes completely

out of service and its capability must be restored).

Major Indicates that a service affecting condition has developed and an urgent

corrective action is required (e.g. when there is severe degradation in the

capability of the managed object and its full capability must be restored).

Minor Indicates the existence of a non-service affecting fault condition and that a

corrective action should be taken in order to prevent a more serious (for

example, service affecting) fault.


20/82

4 Traps and Alarms

Trap/Alarm Categories

The severity of the alarm affects also the following:

Unit Fault Status: The summarized severity of the unit's fault status. It

reflects the severity of the alarm with the highest severity that is ON at a

specific time. For a Base Station, this is the summarized severities of the NPU,

AUs, PIUs, PSUs and AVU.

System Fault Status: The summarized severity of the entire system fault

status.

4 Trap/Alarm Categories

The type of trap/alarm categorizes it into one of the following five basic categories

(as stated in ITU - CCITT Rec. X.733):

Warning Indicates the detection of a potential or impending service-affecting fault,before any significant effects have been felt. Action should be taken to further

diagnose (if necessary) and correct the problem in order to prevent it from

becoming a more serious service-affecting fault.

Info Indicates a non service-affecting event, which doesn't require any further

actions.

Table 1-3: Trap/Alarm Categor ies

Category Denoting String Description

Communications COMM Associated with the procedures and/or processes required

to convey information from one point to another.

Quality of service QoS Associated with degradation in the quality of a service.

Processing Error PROC Associated with software or processing fault.

Equipment EQUP Associated with an equipment fault.

Environmental ENVR Associated with a condition relating to an enclosure in

which the equipment resides.

Table 1-2: Trap/Alarm Severit ies

Severity Description


21/82

BreezeMAX Traps

Traps and Alarms 5

5 BreezeMAX Traps

BreezeMAX traps include the following trap groups:

General Traps on page 5

Chassis/Micro Base Station Related Traps on page 11

NPU/Micro Base Station Related Traps on page 15

ODU Related Traps on page 21

SU Related Traps on page 26

Software Download and BER Test Related Traps on page 29

File Download Related Traps on page 34

Service Related Traps on page 35

RADIUSs Related Traps on page 38

GPS Related Traps on page 42

Spectrum Analyzer Related Traps on page 49

IP CS Mode Configuration Related Traps on page 50

PF Server Related Traps on page 51

MIB II Traps on page 52

5.1 General Traps

5.1.1 rbResetOn Trap

Table 1-4: rbResetOn Trap Variables

Variable Description

Trap ID 1

Description The device/card is about to perform reset.


22/82

6 Traps and Alarms

BreezeMAX Traps

5.1.2 rbDiagnosticsHwFaultOn Trap

Trap Source BST/NPU/AU/SU

Trap Severity Info

Trap Category Equipment

Additional Info 1, 2 (see details in the following table)

Table 1-5: rbResetOn Trap Additional Info

No. Description

1 External Reset

2 Internal Fault Reset

Table 1-6: rbDiagnosticsHwFaultOn Trap Variables


Trap ID 2

Description The device/card has detected a hardware fault.


Trap Severity Major


Additional Info 3...8, 23...27 (see details in the following table)

Binding Parameters rbTrapLedStatus (not supported in current release)

Table 1-4: rbResetOn Trap Variables



23/82

BreezeMAX Traps

Traps and Alarms 7

5.1.3 rbDiagnosticsHwFaultOff Trap

Table 1-7: rbDiagnosticsHwFaultOn/Off Trap Additional Info

No. Description

3 SU HW fault. Manta's (ASIC) PLL is not locked for more than 5 msec.

4 SU HW fault. Manta's (ASIC) PLL is not locked in steady state.

5 SU HW fault. Host failed to download Manta's firmware (complete with CRC

errors, or handshake error).

6 SU HW fault. Radio's PLL is not locked after power up sequence.

7 SU HW fault. Radio's PLL is not locked in steady state.

8 SU, AU, NPU or BST HW fault. A Built In Test (BIT) has failed.

23 BST/AU HW fault. Output Tx Power exceeds PMAX+5dB for more than 5

minutes.

24 BST/AU HW fault. When a process to burn IDU table fails (CRC check on

finish fails, FTP session failed, no place in FFS).

25 BST/AU HW fault. IF synthesizer failed to lock on the frequency set on the

synthesizer.

26 BST/AU HW fault. BST/AU detected an error while downloading the ODU

table. The string includes also the byte number of the ODU table where the

error was detected.

27 BST/AU HW fault. Connection between BST/AU and ODU has been lost.

Table 1-8: rbDiagnosticsHwFaultOff Trap Variables


Trap ID 3

Description A previously detected hardware fault has been fixed.


Trap Severity Equipment

Trap Category Info

Additional Info 3...8, 23...27. For details see Additional Info in rbDiagnosticsHwFaultOn/Off

Trap Additional Info table above.


24/82

8 Traps and Alarms

BreezeMAX Traps

5.1.4 rbMonitorAccessOn Trap

5.1.5 rbMonitorAccessOff Trap

Table 1-9: rbMonitorAccessOn Trap Variables


Trap ID 4

Description The device is accessed via LCI (Monitor port) or Telnet.

Trap Source BST/NPU/SU

Trap Severity Info


Additional Info 140, 141. For details see the following table.

Binding Parameters rbTrapIpAddress (the IP Address of the station accessing the device)

Table 1-10: RbMonitorAccessOn/Off Trap Additional Info

No. Description

140 LCI (Monitor port) access has been detected.

141 Telnet access has been detected.

Table 1-11: rbMonitorAccessOff Trap Variables


Trap ID 5

Description LCI (Monitor port) or Telnet access to the device has been terminated.

Trap Source BST/NPU/SU

Trap Severity Info


Additional Info 140, 141. For details see rbMonitorAccessOn/Off Trap Additional Info table

above.

Binding Parameters rbTrapIpAddress (the IP Address of the station that accessed the device)


25/82

BreezeMAX Traps

Traps and Alarms 9

5.1.6 rbAuNetworkEntryStatus Trap

5.1.7 rbModeConflictOn Trap

Table 1-12: rbAuNetworkEntryStatus Trap Variables


Trap ID 6

Description BST/AU Network Entry status has been changed

Trap Source BST/AU

Trap Severity Info

Trap Category Communication

Additional Info 135...139. For details see the following table.

Table 1-13: rbAuNetworkEntryStatus Trap Additional Info

No. Description

135 BST/AU DHCP process failed

136 BST/AU configuration download failed

137 BST/AU set parameters failed

138 BST/AU firmware download failed

139 BST/AU is in service

Table 1-14: rbModeConfl ictOn Trap Variables


Trap ID 7

Description Conflict between configuration and units capabilities has been detected.

Trap Source AU/SU

Trap Severity Major




26/82

10 Traps and Alarms

BreezeMAX Traps

5.1.8 rbModeConflictOff Trap

Table 1-15: rbAuModeConfli ctOn/Off Traps Additional Info

No. Description

144 Diversity Mode Mismatch: the AU does not support the configured diversity

mode (applicable only to old 2-channels AU).

145 Wrong Bandwidth: the AU/SU does not support the configured Bandwidth.

146 Wrong Duplex Mode - FDD. FDD mode configured, the AU does not support

FDD (aapplicable only to new High Power AU with SW version that does not

support FDD).

147 Wrong Duplex Mode - TDD. TDD mode configured, the AU does not support

TDD (applicable only to old 2-channels AU).

148 Wrong Cell Radius (Max): Configured Cell radius is above the maximum

supported by the AU (taking to consideration Frequency Band, Duplex Modeand Bandwidth. Applicable only to new High Power AU).

149 Wrong Cell radius (Min): Configured value is below the minimum supported by

the AU (applicable only to old 2-channels AU).

Table 1-16: rbModeConflictOff Trap Variables


Trap ID 8

Description Previously detected conflict between configuration and units capabilities has

been corrected.

Trap Source AU/SU

Trap Severity Major


Additional Info 144. For details see rbAuModeConflictOn/Off Traps Additional Info table above.


27/82

BreezeMAX Traps

Traps and Alarms 11

5.1.9 rbOptimalRSSIConflict Trap

5.2 Chassis/Micro Base Station Related Traps

5.2.1 rbShelfCardExtractionOn Trap

5.2.2 rbShelfCardInsertionOn Trap

Table 1-17: rbOptimalRSSIConfl ict Trap Variables


Trap ID 9

Description Conflict between configured Optimal Rx RSSI value and units capabilities has

been detected.

Trap Source AU

Trap Severity Minor


Binding Parameters rbAuOptimalRSSI (the actual value that will be used by the AU)

NOTE

In BST, Slot# will always be 1, and PSU# will always be 1.

Table 1-18: rbShelfCardExtractionOn Trap Variables


Trap ID 21

Description The card is being extracted from the chassis.

Trap Source NPU/AU/PIU/PSU/AVU

Trap Severity Info


Table 1-19: rbShelfCardInsertionOn Trap Variables


Trap ID 22


28/82

12 Traps and Alarms

BreezeMAX Traps

Description The card is being inserted into the chassis.

Trap Source NPU/AU/PIU/AU/AVU

Trap Severity Info


Table 1-19: rbShelfCardInsertionOn Trap Variables



29/82

BreezeMAX Traps

Traps and Alarms 13

5.2.3 rbShelfPeripheralEquipmentFaultOn Trap

5.2.4 rbShelfPeripheralEquipmentFaultOff Trap

Table 1-20: rbShelfPeripheralEquipmentFaultOn Trap Variables


Trap ID 23

Description A fault has been detected in a peripheral unit or a BST component.

Trap Source BST/PIU/PSU/AVU/AVU-FAN

Trap Severity Minor


Additional Info 53...55

Table 1-21: rbShelfPeripheralEquipmentFaultOn Trap Additional Info

No. Description

53 A fault has been detected in a PSU, or BST has detected a power supply

failure.

54 A fault has been detected in a PIU (not applicable to BST).

55 A fault has been detected in the AVU, or the BST has detected a problem in at

least one of its fans.

Table 1-22: rbShelfPeripheralEquipmentFaultOff Trap


Trap ID 24

Description A fault in a peripheral unit has been corrected.

Trap Source BST/PIU/PSU/AVU/AVU-FAN

Trap Severity Info


Additional Info 53...55. See details in the following table.


30/82

14 Traps and Alarms

BreezeMAX Traps

5.2.5 rbShelfEnvParamFaultOn Trap

Table 1-23: rbShelfPeripheralEquipmentFaultOff Trap Addit ional Info

No. Description

53 NPU/BST has detected that the faulty PSU/power supply has become fully

operational.

54 NPU has detected that the faulty PIU has become fully operational.

55 NPU/BST has detected that the faulty AVU/fan has become fully operational

Table 1-24: rbShelfEnvParamFaultOn Trap Variables


Trap ID 25

Description A fault has been detected in a chassis environmental parameter.

Trap Source BST/NPU

Trap Severity Info



Table 1-25: rbShelfEnvParamFaultOn/Off Trap Additional Info

No. Description

73 A fault has been detected in the dry contacts of NPU/BST.

74 An NPU/BST temperature fault has been detected.

75 An AU-IDU temperature fault has been detected.

76 An AU-ODU temperature fault has been detected.


31/82

BreezeMAX Traps

Traps and Alarms 15

5.2.6 rbShelfEnvParamFaultOff Trap

5.3 NPU/Micro Base Station Related Traps

5.3.1 rbConfigurationChanged Trap

Table 1-26: rbShelfEnvParamFaultOff Trap


Trap ID 26

Description A previously detected fault in a chassis environmental parameter has been

fixed.

Trap Source BST/NPU

Trap Severity Info


Additional Info 73...76. For details see rbShelfEnvParamFaultOn/Off Trap Additional Info table

above.

Table 1-27: rbConfigurationChanged Trap Variables


Trap ID 41

Description A configuration change has been detected.

Trap Source See list in

Trap Severity Info



Table 1-28: rbConfigurationChanged Trap Additional Info

No. Description

30 Configuration changed - element added event.

31 Configuration changed - element deleted event.

32 Configuration changed - element modified event.

33 A Management Port parameter has been changed.


32/82

16 Traps and Alarms

BreezeMAX Traps

5.3.2 rbParameterSetFailure Trap

Table 1-29: rbParameterSetFailure Trap Variables


Trap ID 42

Description An error in configuration change has been detected.


Trap Severity Info


Binding Parameters rbTrapSetFailureReason. SeeTable 1-30below.
http://-/?-http://-/?-


33/82

BreezeMAX Traps

Traps and Alarms 17

Table 1-30: rbTrapSetFailureReason

No. Description

1 General Error

2 Failed to update parameters CRC

3 Set defaults to unknown type (internal error)

4 Failed to set defaults (internal error)

5 Log prefix is too long

6 Failed to set Log Prefix (internal error)

7 Cell Radius is invalid

8 Failed to set Cell Radius

9 Failed to set Base Station ID (internal error)

10 Failed to set Base Station Mask (internal error)

11 Failed to set ARQ mode (internal error)

12 Failed to set Band (internal error)

13 Tx Frequency is out of calculated limited range

14 Tx frequency is invalid

15 Tx frequency is out of maximum permitted range

16 Tx Frequency set failed (internal error)

17 Tx Power value is invalid

18 Set Tx Power Failed (internal error)

19 UL Basic rate is invalid

20 Failed to set Uplink Basic Rate (internal error)

21 DL Basic rate is invalid

22 Failed to set Downlink Basic Rate (internal error)

23 It is forbidden to set SU rate while Multirate is enabled

24 Invalid Downlink rate

25 Invalid Uplink rate

26 Invalid Optimal RSSI

27 Set Optimal RSSI failed (internal error)

28 BER Test data size is less than minimum allowed

29 BER Test data size is higher than the maximum allowed

30 BER Test is already running

31 Invalid BER Test Rate


34/82


35/82

BreezeMAX Traps

Traps and Alarms 19

5.3.4 rbMbstCPEQuantityExceed Trap

5.3.5 rbLicenseFileLoadStatus Trap

Table 1-33: rbMbstCPEQuantityExceed Trap Variables


Trap ID 51

Description Allowed quantity of CPEs has been exceeded.

Trap Source BST

Trap Severity Info

Trap Category PROC

Binding Parameters rbSuMacAddr (the MAC Address of rejected SU)

Table 1-34: rbLicenseFileLoadStatus Trap Variables


Trap ID 52

Description License file loading process status.

Trap Source BST/NPU

Trap Severity Info

Trap Category PROC


Table 1-35: rbLicenseFileLoadStatus Trap Additional Info

No. Description

187 License file loaded to wrong device (MAC address conflict).

188 MD5 format is not valid.

189 License file syntax error or empty file.

190 Wrong number of CPEs in Micro Base station Number of Supported CPEs

license file.

191 License file already exists in database.

192 No MD5 match

193 Illegal license count or value (less than 0)

194 Illegal BW ID

195 Too many licenses (more than 5) in file


36/82

20 Traps and Alarms

BreezeMAX Traps

5.3.6 rbMbstLicenseChanged Trap

5.3.7 rbCPELicenseAssigned Trap

5.3.8 rbBackupFileSwitchingModeMismatch Trap

Table 1-36: rbMbstL icenseChanged Trap Variables


Trap ID 53

Description Micro Base Stations license has been changed

Trap Source BST

Trap Severity Info

Trap Category PROC

Binding Parameters IrbAuNumberOfRegisteredSUs (the number of registered SUs) and

rbBstLicenseValue (total number of CPE licenses)

Table 1-37: rbCPELicenseAssigned Trap Variables


Trap ID 54

Description CPE license has been assigned

Trap Source BST/NPU

Trap Severity Info

Trap Category PROC

Binding Parameters rbLicenseCount (available Lll icenses in the CPEs License Bank),

rbLicenseTotal (total number of licenses) and rbSuMacAddr (MAC address of

the last SU assisgned with a license)

Table 1-38: rbBackupFileSwitchingModeMismatch Trap Variables


Trap ID 55

Description Mismatc in Switching Mode between device and loaded backup file

Trap Source NPU

Trap Severity Info



37/82

BreezeMAX Traps

Traps and Alarms 21

5.3.9 rbLastPmTmFileName Trap

5.4 ODU Related Traps

The ODU related traps are generated by the AU/BST. The ODU related traps

include the rbChannelId and rbOduConfigId as binding parameters, identifying

the Channel associated with the ODU and the ODU.

5.4.1 rbOduCommErrorOn Trap

5.4.2 rbOduCommErrorOff Trap

Table 1-39: rbLastPmTmFileName Trap Variables


Trap ID 56

Description A new PMTM file has been generated

Trap Source NPU

Trap Severity Info


Binding Parameters rbBSPmTmLastFileName

Table 1-40: rbOduCommErrorOn Trap Variables


Trap ID 63

Description An error has been detected in the communication with the ODU associated

with the specified Channel ID.

Trap Source BST/AU

Trap Severity Minor


Binding Parameters rbChannelId, rbOduConfigId

Table 1-41: rbOduCommErrorOff Trap Variables


Trap ID 64


38/82

22 Traps and Alarms

BreezeMAX Traps

Description A previously detected error in the communication with the ODU associated withthe specified Channel ID has been fixed.

Trap Source BST/AU

Trap Severity Info



Table 1-41: rbOduCommErrorOff Trap Variables



39/82

BreezeMAX Traps

Traps and Alarms 23

5.4.3 rbOduBandMissmatchOn Trap

5.4.4 rbOduBandMissmatchOff Trap

Table 1-42: rbOduBandMissmatchOn Trap Variables


Trap ID 65

Description A mismatch was detected between the Configured Frequency Band and actual

band supported by the HW of the ODU associated with the specified Channel

ID.

Trap Source BST/AU

Trap Severity Major



Table 1-43: rbOduBandMissmatchOff Trap Variables


Trap ID 66

Description A previously detected mismatch between the Configured Frequency Band and

actual band supported by the HW of the ODU associated with the specified

Channel ID was fixed.

Trap Source BST/AU

Trap Severity Info




40/82

24 Traps and Alarms

BreezeMAX Traps

5.4.5 rbOduPowerMissmatch Trap

5.4.6 rbOduFailureOn Trap

Table 1-44: rbOduPowerMissmatch Trap Variables


Trap ID 67

Description Configured Tx Power of the ODU associated with the specified Channel ID is

higher than the actual Maximum Tx Power of the ODU.

Trap Source BST/AU

Trap Severity Info



Table 1-45: rbOduFailureOn Trap Variables


Trap ID 68

Description ODU unit failure has been detected.

Trap Source BST/AU

Trap Severity Major


Additional Info 225-228. For details seeTable 1-46below.

Binding Parameters rbChannelId, rbOduConfigId, rbOduStatusMask (for details on ODU Status

Mask refer toTable 1-47below)

Table 1-46: rbOduFailureOn Trap Additional Info

No. Description

225 ODU was shut down as a result of over current.

226 ODU was shut down as a result of unlocked synthesizer

227 ODU was shut down as a result of a too high reflected power

228 ODU was shut down as a result of over heating


41/82

BreezeMAX Traps

Traps and Alarms 25

The Status Mask is comprised of 8 hexadecimal digits representing 32 bits. The

table below shows the meaning of each bit and the Status Mask when the

applicable bit is set to 1:

Table 1-47: ODU Status Mask Details

Bit # Status Mask Problem Description

None 00-00-00-00 No problem

1 00-00-00-01 "ODU temperature is too high"

2 00-00-00-02 "ASK attenuator is off"

3 00-00-00-04 "RF Synth. is not locked"

4 00-00-00-08 "Reverse power alarm is on"

5 00-00-00-10 "REF V. tune alarm is on"

6 00-00-00-20 "RF RX DCA is not 12dB"

7 00-00-00-40 "TX IF DCA reached it's limits"

8 00-00-00-80 "PD power VVA is out of limits"

9 00-00-01-00 "PA#1 current is out of limits"

10 00-00-02-00 "HPA current is out of limits"

11 00-00-04-00 "RF VVA is out of limits"

12 00-00-08-00 "ADC source is digital"

13 00-00-10-00 "REF synthesizer is not locked"

14 00-00-20-00 "TI Gain is off"

15 00-00-40-00 "BW select is 10MHz"

16 00-00-80-00 "PA#2 current is out of limits"

17 00-01-00-00 "TX RF DCA value mismatch"

18 00-02-00-00 "HPA does not exist"

19 00-04-00-00 "LNA is off"

20 00-08-00-00 "Over Current alarm is on"

21 00-10-00-00 "REF_V_TUNE is out of range"

22 00-20-00-00 "PA1 max iterations exceeded"

23 00-40-00-00 "PA2 max iterations exceeded"

24 00-80-00-00 "HPA max iterations exceeded"

25 01-00-00-00 "VVA max iterations exceeded"

26 02-00-00-00 "PD VVA max iterations exceeded"

27-32 04-00-00-00 to 80-00-00-00 reserved for future use


42/82

26 Traps and Alarms

BreezeMAX Traps

5.4.7 rbOduFailureOff Trap

5.5 SU Related Traps

5.5.1 rbSuMaxTxPowerReached Trap

5.5.2 rbSuMinTxPowerReached Trap

Table 1-48: rbOduFailureOff Trap Variables


Trap ID 69

Description A previously detected ODU failure was fixed.

Trap Source BST/AU

Trap Severity Info



Table 1-49: rbSuMaxTxPowerReached Trap Variables


Trap ID 81

Description The SU has reached the maximum allowed output power.

Trap Source SU

Trap Severity Info

Trap Category PROC

Binding Parameters rbSuTxPower (the actual Tx Power)

Table 1-50: rbSuMinTxPowerReached Trap Variables


Trap ID 82

Description The SU has reached the minimum allowed output power.

Trap Source SU

Trap Severity Info

Trap Category PROC


43/82

BreezeMAX Traps

Traps and Alarms 27

5.5.3 rbSuNetworkEntryStatus Trap

5.5.4 rbSuLicense Trap

Binding Parameters rbSuTxPower (the actual Tx Power)

Table 1-51: rbSuNetworkEntryStatus Trap Variables


Trap ID 83

Description SU's network entry status has been changed.

Trap Source SU

Trap Severity Info

Trap Category PROC


Table 1-52: rbSuNetworkEntryStatus Trap Add itional Info

No. Description

132 Authentication process failed

133 Registration process failed

134 Registration process completed successfully

Table 1-53: rrbSuLicense Trap Variables


Trap ID 84

Description License Grace Period warning.

Trap Source SU

Trap Severity Info

Trap Category PROC


Binding Parameters rbLicenseId (Type of License). The currently supported value for rbLicenseId is

bandwidth (1).

Table 1-50: rbSuMinTxPowerReached Trap Variables



44/82

28 Traps and Alarms

BreezeMAX Traps

Table 1-54: rbSuLicense Trap Addit ional Info

No. Description

182 Temporary Grace Period started.

183 Temporary Grace Period expired.

184 Grace Period started.

185 Grace Period expired.

186 Grace Period will expire in 3 days.


45/82

BreezeMAX Traps

Traps and Alarms 29

5.5.5 rbSuDuplicateName Trap

5.6 Software Download and BER Test Related Traps

5.6.1 rbSwDownloadStart Trap

5.6.2 rbSwDownloadEnd Trap

Table 1-55: 5.5.4rbSuDupli cateName Trap Variables


Trap ID 85

Description The SU Name is already in use by another SU. Services to the SU will be

denied until another, unique name is configured for the SU. The SU's name in

the database is changed temporarily to SU@ until a new name

is configured.

Trap Source SU

Trap Severity Major

Trap Category PROC

Binding Parameters rbSuMacAddr (the MAC Address of the other SU with the same name),

rbSuSysName (the duplicate name) and rbSuSysName (the new temporary

name).

Table 1-56: rbSwDownloadStart Trap Variables


Trap ID 101

Description SW download process has started.


Trap Severity Info

Trap Category PROC

Table 1-57: rbSwDownloadEnd Trap Variables


Trap ID 102

Description SW download process has been finished.


Trap Severity Info


46/82

30 Traps and Alarms

BreezeMAX Traps

5.6.3 rbSwDownloadError Trap

Trap Category PROC

Table 1-58: rbSwDownloadError Trap Variables


Trap ID 103

Description An error has been detected in the SW download process.


Trap Severity Minor

Trap Category PROC

Additional Info 100...103, 150..181. See details in the following table.

NOTE

Additional Info 150181 details reasons for AU/SU SW download failures.

Table 1-59: rbSwDownloadError Trap Additional Info

No. Description

100 Unsupported Software version has been detected. This trap is generated by a

BST/NPU when there is no compatibility between versions (BST/NPU, AU or

SU). It is generated by AU and SU when there is no compatibility with

corresponding SU or AU versions.

101 The requested SW version is not available at BST/NPU site. This trap is

generated only by BST/NPU.

102 SW download process failed.

103 No space available in disk. There are already 3 SW versions in BST/NPU forAU/SU, and another version is being downloaded.

150 Download is aborted by an external event.

151 Header's "HW Version" is not compatible with the real unit's HW

152 Header's "HW Config" is not compatible with the real unit's HW

153 Failure to create a new file on Flash

154 Failure to open file on Flash

155 Failure to get file statistics (size..)

Table 1-57: rbSwDownloadEnd Trap Variables



47/82


48/82

32 Traps and Alarms

BreezeMAX Traps

5.6.4 rbSwSwitchFailed Trap

5.6.5 rbSwSwitchSucceed Trap

5.6.6 rbBERTestFinished Trap

* Not applicable for current release

Table 1-60: rbSwSwitchFailed Trap Variables


Trap ID 104

Description Software switch-over failed


Trap Severity Minor

Trap Category PROC

Additional Info 104, 105. See details in the following table

Table 1-61: rbSwSwitchFailed Trap Addi tional Info

No. Description

104 Run from shadow action

105 Set as Main action

Table 1-62: rbSwSwitchSucceed Trap Variables


Trap ID 105

Description Software switch-over succeeded


Trap Severity Info

Trap Category PROC

Additional Info 104, 105. See details in the table above

Table 1-63: rbBERTestFin ished Trap Variables


Trap ID 106

Description BER Test finished


49/82

BreezeMAX Traps

Traps and Alarms 33

Trap Source AU

Trap Severity Info

Trap Category PROC

Additional Info 230, 231. See details in the following table.

Binding Parameters rbSuMacAddr and rbSuSysName

Table 1-64: rbERTestFinished Trap Additional Info

No. Description

230 Test stopped

231 Test Aborted

Table 1-63: rbBERTestFin ished Trap Variables



50/82

34 Traps and Alarms

BreezeMAX Traps

5.6.7 rbBERTestStarted Trap

* Not applicable for current release

5.6.8 rbSwFileConflict Trap

5.7 File Download Related Traps

5.7.1 rbXMLDownloadResult Trap

* Not applicable to current release.

Table 1-65: rbBERTestStarted Trap Variables


Trap ID 107

Description BER Test has started

Trap Source AU

Trap Severity Info

Trap Category PROC

Binding Parameters rbSuMacAddr and rbSuSysName

Table 1-66: rbSwFileConfl ict Trap Variables


Trap ID 108

Description The HW of the AU/SU does not support the type (Advanced Si/Standard) of the

SW File.

Trap Source AU/SU

Trap Severity Minor

Trap Category PROC

Table 1-67: rbXMLDownloadResult Trap Variables


Trap ID 109

Description XML file download status

Trap Source BST/NPU


51/82

BreezeMAX Traps

Traps and Alarms 35

5.7.2 rbFreqBandDownloadResult Trap

5.8 Service Related Traps

5.8.1 rbServiceDown Trap

Trap Severity Info

Trap Category PROC

Additional Info 220..224. See details in the following table.

Table 1-68: r rbXMLDownloadResult and rbFreqBandDownloadResult Traps Add itional Info

No. Description

219 Wrong RFU (Frequency Bands) File version

220 File download started.

221 File download completed

222 File MD5 (signature) failure

223 File parsing failure

224 File download failure

Table 1-69: rbFreqBandDownloadResult Trap Variables


Trap ID 110

Description Frequency Bands file download status

Trap Source BST/NPU

Trap Severity Info

Trap Category PROC

Additional Info 217..222, 224. See details in rbXMLDownloadResult and

rbFreqBandDownloadResult Traps Additional Info table above.

Table 1-70: rbServ iceDown TrapVariables


Trap ID 111

Description The Service is down

Table 1-67: rbXMLDownloadResult Trap Variables



52/82

36 Traps and Alarms

BreezeMAX Traps

5.8.2 rbServiceUp Trap

5.8.3 rbServiceChanged Trap

Trap Source BST/NPU

Trap Severity Major

Trap Category QoS

Binding Parameters rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID, rbSuMacAddr.

Table 1-71: rbServiceUp Trap Variables


Trap ID 112

Description The service has become operational

Trap Source BST/NPU

Trap Severity Info

Trap Category QoS

Binding Parameters rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID, rbSuMacAddr.

Table 1-72: rbServi ceChanged Trap Variables


Trap ID 113

Description The Service properties have been modified

Trap Source BST/NPU

Trap Severity Info

Trap Category QoS


Binding Parameters rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID.

Table 1-73: rbServiceChanged Trap Additional Info

No. Description

119 Service Admin Status has been changed

120 Service SU MAC Address has been changed

Table 1-70: rbServ iceDown TrapVariables



53/82

BreezeMAX Traps

Traps and Alarms 37

5.8.4 rbServiceGeneralError Trap

121 Service VLAN List has been changed

122 Service Profile has been changed (implies that another Service Profile has

been set)

Table 1-74: rbServiceGeneralError Trap Variables


Trap ID 114

Description A Service error has been detected

Trap Source BST/NPU

Trap Severity Minor

Trap Category QoS


Binding Parameters rbServiceIdx, rbSubscriberIdx, rbServiceName, rbSubscriberID.

Table 1-75: rbServiceGeneralError Trap Additional Info

No. Description

111 The maximum allowed number of Subscribers has been reached

112 The maximum allowed number of Service configurations has been reached

113 The maximum allowed number of Service Profile configurations has been

reached

114 The maximum allowed number of Forwarding Rules configurations has been

reached

115 The maximum allowed number of Policy Rules configurations has been

reached

116 The maximum allowed number of QoS Profiles configurations has been

reached

117 The maximum allowed number of calls has been reached

118 There is no available bandwidth to allocate to a new VoIP call

Table 1-73: rbServiceChanged Trap Additional Info

No. Description


54/82

38 Traps and Alarms

BreezeMAX Traps

5.8.5 rbNetworkingError Trap

5.9 RADIUSs Related Traps

5.9.1 rbSwitchedAuthenticationServer Trap

5.9.2 rbSwitchedAccountingServer Trap

Table 1-76: rbNetworkingError Trap Variables


Trap ID 115

Description Networking error has been detected. Services to the SU are denied until the SU

is reset from the wireless link side by the NPU/BST.

Trap Source SU

Trap Severity Info

Trap Category PROC

Additional Info 10: Loop was detected on SU Ethernet port.

Table 1-77: rbSwitchedAuthenticationServer Trap Variables


Trap ID 117

Description RADIUS Client has switched to another Authentication Server Trap Source BST/NPU

Trap Severity Info

Trap Category Comm

Table 1-78: rbSwitchedAccountingServer Trap Variables


Trap ID 118

Description RADIUS Client has switched to another Accounting Server

Trap Source BST/NPU

Trap Severity Info

Trap Category Comm


55/82

BreezeMAX Traps

Traps and Alarms 39

5.9.3 rbServiceEstablishmentFailure Trap

Table 1-79: rbServiceEstablishmentFailure Trap Variables


Trap ID 119

Description Service establishment failure

Trap Source BST/NPU

Trap Severity Minor

Trap Category QoS

Additional Info 200..210, 214. See details in the following table.

Binding Parameters rbServiceIdx and rbServiceName (created from User Name (SU MAC) and

Service index)

Table 1-80: rbServiceEstablishmentFailure Trap Additional Info

No. Description

200 Service Profile does not exist

201 Too many VLAN IDs defined for the service

202 Too many VLAN IDs are defined for one SU

203 Wrong VLAN ID (0 to 4094 expected)

204 Definitions mismatch between Transparent Mode and VPL ID

205 VLANs mismatch: Can't allocate for the same SU services with and without

VLANs

206 Service Type and VLAN mismatch: Can't create 2 services with either the same

type of service, or L2 and Voice services, with the same VLAN ID

207 Only one VLAN permitted when VLAN classification mode is On

208 Access VLAN mismatch: Access VLAN is permitted only with Hybrid Mode Off

and an empty VLAN list, or for Hybrid Mode On with a VLAN list

209 Duplicate VLAN: Access VLAN can not be equal to any VLAN in the SU VLAN

list

210 Too many Access VLANs: Only one Access VLAN allowed per SU

211 Client Authentication timeout: No connection between NPU and Authentication

Server during authentication or re-authentication

212 User Accounting Server start time out

213 User Accounting Server stop time out


56/82

40 Traps and Alarms

BreezeMAX Traps

5.9.4 rbUserAuthenticationTimeout Trap

5.9.5 rbUserAuthenticationReject Trap

5.9.6 rbAuthenticationServerKeepAliveTimeoutOn Trap

214 Services Table is full

Table 1-81: rbUserAuthenticationTimeout Trap Variables


Trap ID 120

Description User authentication timeout

Trap Source BST/NPU

Trap Severity Info

Trap Category Comm

Additional Info 211..213. See details in the table above.

Binding Parameters rbSuMacAddr

Table 1-82: rbUserAuthenticationReject Trap Variables


Trap ID 121

Description User authentication rejected

Trap Source BST/NPU

Trap Severity Info

Trap Category Comm

Binding Parameters rbSuMacAddr

Table 1-83: rbAuthenticationServerKeepAliveTimeoutOn Trap Variables


Trap ID 122

Description Authentication Server Keep Alive Timeout has been detected

Trap Source BST/NPU

Trap Severity Major

Table 1-80: rbServiceEstablishmentFailure Trap Additional Info

No. Description


57/82

BreezeMAX Traps

Traps and Alarms 41

5.9.7 rbAuthenticationServerKeepAliveTimeoutOff Trap

5.9.8 rbAccountingServerKeepAliveTimeoutOn Trap

5.9.9 rbAccountingServerKeepAliveTimeoutOff Trap


Binding Parameters rbRadiusAuthServerAddress

Table 1-84: rbAuthenticationServerKeepAliveTimeoutOff Trap Variables


Trap ID 123

Description Previously detected Authentication Server Keep Alive Timeout terminated,

Trap Source BST/NPU

Trap Severity Info


Binding Parameters rbRadiusAuthServerAddress

Table 1-85: rbAccountingServerKeepAliveTimeoutOn Trap Variables


Trap ID 124

Description Accounting Server Keep Alive Timeout has been detected

Trap Source BST/NPU

Trap Severity Major


Binding Parameters rbRadiusAcctServerAddress

Table 1-86: rbAccount ingServerKeepAliveTimeoutOff Trap Variables


Trap ID 125

Description Previously detected Accounting Server Keep Alive Timeout terminated,

Trap Source BST/NPU

Trap Severity Info

Table 1-83: rbAuthenticationServerKeepAliveTimeoutOn Trap Variables



58/82

42 Traps and Alarms

BreezeMAX Traps

5.10 GPS Related Traps

5.10.1 rbExternal1PPSFailureOn Trap

5.10.2 rbExternal1PPSFailureOff Trap

5.10.3 rbInternal1PPSFailureOn Trap


Binding Parameters rbRadiusAcctServerAddress

Table 1-87: rbExternal1PPSFailureOn Trap Variables


Trap ID 134

Description External 1PPS failure has been detected. Applicable only if external 1PPS

clock is enabled .

Trap Source BST/NPU

Trap Severity Major


Table 1-88: rbExternal1PPSFailu reOff Trap Variables


Trap ID 135

Description Previously detected External 1PPS failure has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-89: rbInternal1PPSFailureOn Trap Variables


Trap ID 136

Description Internal 1PPS failure has been detected. Applicable only if external 1PPS clock

is disabled .

Table 1-86: rbAccount ingServerKeepAliveTimeoutOff Trap Variables



59/82

BreezeMAX Traps

Traps and Alarms 43

5.10.4 rbInternal1PPSFailureOff Trap

5.10.5 rbExternal16MHzFailureOn Trap

5.10.6 rbExternal16MHzFailureOff Trap

Trap Source BST/NPU

Trap Severity Major


Table 1-90: rbInternal1PPSFailureOff Trap Variables


Trap ID 137

Description Previously detected Internal 1PPS failure has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-91: rbExternal16MHzFailu reOn Trap Variables


Trap ID 138

Description External 16MHz failure has been detected. Applicable only if external 16MHz

clock is enabled .

Trap Source BST/NPU

Trap Severity Major


Table 1-92: rbExternal16MHzFailureOff Trap Variables


Trap ID 139

Description Previously detected External 16MHz failure has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-89: rbInternal1PPSFailureOn Trap Variables



60/82

44 Traps and Alarms

BreezeMAX Traps

5.10.7 rbInternal16MHzFailureOn Trap

5.10.8 rbInternal16MHzFailureOff Trap

5.10.9 rbGPSComFailureOn Trap

Table 1-93: rb Internal16MHzFailureOn Trap Variables


Trap ID 140

Description Internal 16MHz failure has been detected. Applicable only if external 16MHz

clock is disabled .

Trap Source BST/NPU

Trap Severity Major


Table 1-94: rbInternal16MHzFailureOff Trap Variables


Trap ID 141

Description Previously detected Internal 16MHz failure has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-95: rbGPSComFailu reOn Trap Variables


Trap ID 142

Description GPS communication failure has been detected. Applicable only if GPS type is

Trimble.

Trap Source BST/NPU

Trap Severity Major



61/82

BreezeMAX Traps

Traps and Alarms 45

5.10.10 rbGPSComFailureOff Trap

5.10.11 rbGPSHealthyFailureOn Trap

5.10.12 rbGPSHealthyFailureOff Trap

Table 1-96: rbGPSComFailu reOff Trap Variables


Trap ID 143

Description Previously detected GPS communication failure has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-97: rbGPSHealthyFailureOn Trap Variables


Trap ID 144

Description GPS failure has been detected. Applicable only if GPS type is Trimble.

Trap Source BST/NPU

Trap Severity Major


Table 1-98: rbGPSHealthyFailureOff Trap Variables


Trap ID 145

Description Previously detected GPS failure has been terminated.

Trap Source BST/NPU

Trap Severity Info



62/82

46 Traps and Alarms

BreezeMAX Traps

5.10.13 rbMin4SatSyncFailureOn Trap

5.10.14 rbMin4SatSyncFailureOff Trap

5.10.15 rbAUExternal1PPSFailureOn Trap

Table 1-99: rbMin4SatSyncFailureOn Trap Variables


Trap ID 146

Description Less than four satellites are received by the GPS. Applicable only if GPS type

is Trimble.

Trap Source BST/NPU

Trap Severity Major


Table 1-100: rbMin4SatSyncFailureOff Trap Variables


Trap ID 147

Description Previously detected failure status where less than 4 satellites are received by

the GPS has been terminated.

Trap Source BST/NPU

Trap Severity Info


Table 1-101: rbAUExternal1PPSFailureOn Trap Variables


Trap ID 148

Description External 1PPS failure has been detected by the AU, indicating a failure in

selected 1PPS clock arriving from the NPU.

Trap Source AU

Trap Severity Major



63/82

BreezeMAX Traps

Traps and Alarms 47

5.10.16 rbAUExternal1PPSFailureOff Trap

5.10.17 rbAUHoldOverEnteredOn Trap

5.10.18 rbAUHoldOverEnteredOff Trap

Table 1-102: rbAUExternal1PPSFailureOff Trap Variables


Trap ID 149

Description Previously detected External 1PPS (from NPU to AU) failure has been

terminated.

Trap Source AU

Trap Severity Info


Table 1-103: rbAUHoldOverEnteredOn Trap Variables


Trap ID 150

Description AU has entered Hold Over status.

Trap Source AU

Trap Severity Major


Table 1-104: rbAUHoldOverEnteredOff Trap Variables


Trap ID 151

Description AU has exitted Hold Over.

Trap Source AU

Trap Severity Info



64/82

48 Traps and Alarms

BreezeMAX Traps

5.10.19 rbAUHoldOverTimeoutPassedOn Trap

5.10.20 rbAUHoldOverTimeoutPassedOff Trap

5.10.21 rbAUHoldOverTxStoppedOn Trap

Table 1-105: rbAUHoldOverTimeoutPassedOn Trap Variables


Trap ID 152

Description Hold Over Timeout has passed.

Trap Source AU

Trap Severity Major


Table 1-106: rbAUHoldOverTimeoutPassedOff Trap Variables


Trap ID 153

Description Hold Over Timeout passed status has been terminated.

Trap Source AU

Trap Severity Info


Table 1-107: rbAUHoldOverTxStoppedOn Trap Variables


Trap ID 154

Description Hold Over Timeout has passed and Tx was stopped.

Trap Source AU

Trap Severity Major



65/82


66/82

50 Traps and Alarms

BreezeMAX Traps

5.12 IP CS Mode Configuration Related Traps

5.12.1 rbIPCSModeConfigurationError Trap


Table 1-111: rbAUSpecAnalyzerTestStatus Trap Addit ional Info

No. Description

Test Started

230 Test stopped

231 Test Aborted

Test Not Ready

Table 1-112: rbIPCSModeConfigurationError Trap Variables


Trap ID 163

Description IP CS Mode configuration error

Trap Source NPU

Trap Severity Info



Table 1-113: rbIPCSModeConfigurationError Trap Additional Info

No. Description

235 Invalid Filter ID in Accept message from AAA server

236 Frame IP for VoIP service in Accept message from AAA server is invalid

237 Service Profile with VLAN Transparency Mode is invalid

238 Service Profile with Priority Marking is invalid

239 Service Profile with VPL ID is invalid

Table 1-110: rbAUSpecAnalyzerTestStatus Trap Variables



67/82

BreezeMAX Traps

Traps and Alarms 51

5.13 PF Server Related Traps

5.13.1 rbPFSereverKeepAliveTimeoutOn Trap

5.13.2 rbPFSereverKeepAliveTimeoutOff Trap

240 Service Profile with Maximum Number of Calls is invalid

241 Same Frame IP With Same VPL ID is invalid

Table 1-114: rbPFSereverKeepAliveTimeoutOn Trap Variables


Trap ID 170

Description PF Server Keep Alive Timeout has been detected

Trap Source BST/NPU

Trap Severity Major


Binding Parameters rbPMPFServerIpAddress

Table 1-115: rbPFSereverKeepAl iveTimeoutOff Trap Variables


Trap ID 171

Description A previously detected PF Server Keep Alive Timeout has terminated

Trap Source BST/NPU

Trap Severity Info

Trap Category Equi

breezemax tdd ver.4.5 traps & alarms_080513

Documents