brief biographical data - assiut university · brief biographical data name: prof. dr. mohamed...

Prof. Dr. M.R.Bayoumi Mech. Eng. Dept.Faculty of Eng. Assiut University KLK אא א

- 1 -

BBrriieeff BBiiooggrraapphhiiccaall DDaattaa

NNaammee:: Prof. Dr. Mohamed Ragab Bayoumi

TTiittllee aanndd PPoossiittiioonn:: Professor of Production Engineering and Mechanical Design (Engineering Materials),

Vice - President of Assiut University for Postgraduate Studies and Research Affairs, Assiut University, Assiut, Egypt.

DDaattee aanndd PPllaaccee ooff BBiirrtthh:: October 11, 1951, Egypt.

MMaarriittaall SSttaattuuss :: Married and four dependent.

LLaanngguuaaggeess:: Arabic, English, French.

AAddddrreessss :: Administration Building of Assiut University, Assiut University, Assiut, Egypt Post box No.71515

OR

Mechanical Engineering Department, Faculty of Engineering, Assiut University, Assiut, Egypt.

TTeelleepphhoonnee:: +2 (088) 2314132, +2 (088) 2300940 (Home) +2 (088) 2355150, +2 (088)2357800, +2 (088) 2411498. (Office) +2012/7370779 (Mobile) FFaaxx:: +2 (088) 2357800, +2 (088) 2314132

EE-- MMaaiill:: [email protected] & [email protected] [email protected]


- 2 -

B.Sc. with honor degree, in June 1974 from Mechanical Engineering Department, Assiut University, Assiut, Egypt.

M. Sc degree in June 1978 from Mechanical Engineering Department,

Assiut University, Assiut, Egypt.

Ph.D. Degree, in May 1984 from Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

Engineering Materials and Their Applications in Production Engineering and Mechanical Design.

From October 1974 to October 1978 - Demonstrator (teaching and research assistant) at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

From October 1978 to January 1981 - Assistant Lecturer at the

Mechanical Engineering Department, Assiut University, Assiut, Egypt.

From January 1981 to October 1983 - Teaching and Research Assistant at the Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

From October 1983 to October 1986 - Research Associate at the

Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

From October 1986 to December 1991 - Assistant Professor at the


EEdduuccaattiioonn

SSppeecciiaalliizzaattiioonn

EExxppeerriieennccee


- 3 -

From June 1987 to October 1987 - Visiting scientist at the Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

From February 1989 to September 1992 - Assistant Professor at the

Department of Production Engineering and Mechanical Systems Design, King Abdulaziz University, Jeddah, Saudi Arabia.

From September 1989 to February 1994 - Associate Professor at the

Department of Production Engineering and Mechanical Systems Design, King Abdulaziz University, Jeddah, Saudi Arabia.

From December 1991 to January 1997 - Associate Professor at the


From January 1997 to Now - Professor at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

From January 1998 to August 2000 - Vice - Dean of Sugar Technology

Research Institute, Assiut University, Assiut, Egypt.

From August 2000 to September 2006 - Dean of Sugar Technology Research Institute, Assiut University, Assiut, Egypt.

From September 2006 to Now - Vice - President of Assiut University for

Postgraduate Studies and Research Affairs, Assiut University, Assiut, Egypt.

Engineering Materials and their Applications.

Production Engineering and Mechanical Design.

Failure Analysis and Fault Diagnosis.

Metal Forming.

Fracture, Fatigue and Corrosion.

Cracks in Engineering Materials, Weldments and Mechanical Systems.

Sugar Technology and Factory Planning.

AArreeaass ooff IInntteerreesstt


- 4 -

Chairman of the board of directors of health care unit for teaching staff assistants and their families.

Vice chairman of the board of directors of the sugar technology research institute .

Member in the General assembly of Sugar and its integrated industries

company.

Member in Assiut University Council.

Member in Assiut University libraries committee.

Member in the higher education enhancement center .

Member of English studying program.

Member in the university directed affiliation program .

Member in the university buildings committee.

Member in quality assurance and accreditation center.

Member in the board of directors of Assiut University club.

Member in the social solidarity fund .

Member in opened education center.

Member - Egyptian Engineers Syndicate.

Member - Egyptian Welding Society.

Member - Association of Professional Engineers of the Province of Manitoba, Canada.

Member - The New Yourk Academy of Sciences.

Member - The American Society of Mechanical Engineers.

MMeemmbbeerrsshhiipp iinn PPrrooffeessssiioonnaall SSoocciieettiieess


- 5 -

Vice - President of Assiut University for Postgraduate Studies and Research Affairs.

Chairman of:

1. The Genetic Engineering & Molecular Biology Research Center. 2. Center for Translation and Linguistic Research. 3. Assiut University Network. 4. Electron Microscope Unit. 5. Assiut University Mycological Center AUMC. 6. Assiut University Drug Research Center. 7. Microfilm Documentation and Databases Unit. 8. Assiut University Unit of Trace Analyses.

Supervisor of Faculty of Agriculture (Its Financial Affairs and management) Assiut University.

Supervisor of Cars Management of Assiut University.

Vice - Dean of Sugar Technology Research Institute at Assiut University.

Dean - Sugar Technology Research Institute at Assiut University.

Consultant for Egypt Aluminum Company, Egypt from 1988 - 1989.

Consultant for Assiut University President for Libraries Affairs.

Member - Consultancy office of the Faculty of Engineering at Assiut

University.

Member - Committee for Basic Sciences Sector at the Supreme Council

of Egyptian Universities.

Member - Board of directors of the Production Workshop unit at Assiut University.

Member - Center for south valley Development at Assiut University.

Member - Board of directors of the Electron Microscope Unit at Assiut

University.

Member - Committee for Graduate Studies and Scientific Research at Assiut University.

LLeeaaddeerrsshhiipp RReessppoonnssiibbiilliittiieess // AAccttiivviittiieess


- 6 -

Member - Committee for Environmental Affairs and Community Development at Assiut University.

Principal Investigator for different Scientific Research, Industrial and

Higher Education Development Projects.

Main Coordinator \ Supervisor of Creating the “World Bank Public Information Center at Assiut University”.

Attendance and presentation of scientific papers in (35) International Conferences.

Member of the Organizing and Steering Committee for (19) International

Conferences.

Referee for the research papers submitted for (9) International Conferences.

General Secretary for (5) International Conferences.

(116) Scientific Research are published in International Journals, periodicals and Conferences Proceedings.

Book published in Arabic and entitled “Engineering Drawing

( لرسـم الهندسـى ا )” by M.A. Mansour, M.K. Bedawi, M.R. Bayoumi, M.A. Hamid and A.K. Abdelatif (1992).

(29) Technical and Scientific reports for different financially supported

Scientific and Higher Education Development projects submitted for different factories, companies, national / international Governmental Agencies, and European Union (EU).

Book published in Arabic and entitled “Principles of Production

Technology ( اجـــــ تكنولوجيـا اإلنت ادئـــــ مب ), “ by M. G. El-Sebaie, O. I. El-Ganiny, M. R. Bayoumi and A. A. Nasser.

Book published in Arabic and entitled “History of Engineering Sciences

( ــ ــوم الهندســيةت اريخ العل )”, by M. A. Ashour, M. R. Bayoumi, A. M. Ghania, N. Abdel-Gayed.

CCoonnffeerreenncceess

PPuubblliiccaattiioonnss


- 7 -

Book published in Arabic and entitled “Guide for the use of Internet for

Scientific Research and Information Searching, ( اتـــحث عن المعلومـــمى و البــحث العلـــرنت فى البـــكة االنتــدام شبــل استخــــليد )” by M. R. Bayoumi and M. R. Mahmoud, Assiut University publishing and Distribution Center, 2002.

I have offered many teaching Undergraduate and graduate as well as

training courses in Egypt, Canada, Saudi Arabia and United Emirates.

Training Courses and Continuous education programs have been offered for:

• Egypt Aluminum Company. • Egypt Sugar and Integrated Industries Company. • Assiut Cement Company, Egypt. • Assiut Fertilizer Factory, Egypt. • Assiut Petroleum Refinery Company, Egypt. • Abo-Dubi Gas Liquification Company (ADGAS), United Emirates. • Sadat Academy for Management Sciences, Egypt. • Assiut University Electron Microscope Unit, Egypt. • Spring School on “Current Activities in Materials Science” Assiut

University, Assiut, Egypt. • Different Special training workshops as well as various long life

Learning workshops at Egyptian Universities

I am supervising 10 M. Sc. thesis ( 10 of them were awarded ) as well as supervising 5 Ph.D. thesis ( 4 of them were awarded and 1 of them is in progress ).

Will be furnished upon request

TTeeaacchhiinngg EExxppeerriieennccee

RReeffeerreenncceess


- 8 -

PPuubblliiccaattiioonn LLiisstt األبحاث المنشورةاألبحاث المنشورة قائمةقائمة

1. M.R. Bayoumi and M.G. El-Sebaie, “Pressure Assisted Deep Drawing of Sheet Metals considering the Effect of Friction ” Bulletin of the Faculty of engineering Assiut University, Egypt, Vol. 6, part 2, (1977).

2. M.R. Bayoumi and M.G. El-Sebaie, “ Deep Drawing of Semi-Conical Headed Shells into

a High Pressure Medium ”, First Conference for Theoretical and Applied Mechanics, Cairo, A. R. E. , Academy of Scientific Research and Technology, pp. 224 - 232., December 16 - 18, (1980).

3. M.R. Bayoumi and M. G. El-Sebaie, “Deep- Drawing of Conical Headed Shells into

a High Pressure Medium”, Bander Bleeche Rohre, pp. 545-547, December (1980). 4. M.R. Bayoumi and M.G. El-Sebaie, “Deep- Drawing of Hemispherical Headed Shells into

a High Pressure Medium, Current Advances in Mechanical Design and Production”, G. S. A. Shawki and S. M. Metwalli, Eds., Pergamon Press, pp. 257-267, (1981) .

5. M. R. Bayoumi and M. N. Bassim, “Temperature Dependence of Fracture Toughness

(JIC) and Ductility for BCC Materials in the Transition Region”, International Journal of Fracture, Vol. 23, No. 5, pp. 259 - 269, (1983).

6. M. R. Bayoumi and M. N. Bassim, “Experimental Correlation between Ductility

and J- Integral in the Transition Region of 1045 Steel”, Journal of Engineering Fracture Mechanics, Vol. 18, No. 3, pp. 679-691, (1983).

7. M. R. Bayoumi and M. N. Bassim, “ Strain Rate Dependence of Fracture Toughness

JIC and Ductility ”, Proceedings of Canadian Fracture Conference- CFCIO, University of Waterloo, pp. 173 -181, (1983).

8. M. R. Bayoumi, J. Klepaczko and M.N. Bassim, “Study of the Relationship Between

Fracture Toughness (JIC) and Bulge Ductility”, International Journal of Fracture, Vol. 23, No. 1, pp. 71-79, (1983).

9. M. R. Bayoumi and M. N. Bassim, “ Stretch Zone, Ductility and Toughness Studies in the

Transition Region of 1045 Steel”, Proceedings of the International Conference of Meterials, ICM4, Stockholm, Sweden, Vol. 2, pp. 803-811, (1983).

10. M. R. Bayoumi, J. Klepaczko and M. N. Bassim, “Determination of Fracture Toughness

JIC under Quasi-Static and Dynamic Loading Conditions Using Wedge Loaded Specimens”, Journal of Testing and Evaluation, Vol. 12, No. 5, pp. 316-323, (1984).

11. M. R. Bayoumi, “Deep Drawing of Anisotropic Work-Hardening Sheet Metals into

a High Pressure Medium”, Journal of Testing and Evaluation, Vol. 12, No. 6, pp. 353-363, (1984).


- 9 -


12. D. Shum, M. R. Bayoumi, and M.N. Bassim, “New Methods in Dynamic Fracture Characterization”, presented at the 22nd Annual Meeting, Society of Engineering Science, Inc., October 7-9, (1985).

13. D. Shum, M. N. Bassim and M. R. Bayoumi, “Dynamic Tensile Fracture Toughness

Evaluation Using Compact Tension Specimens”, International Journal of Fracture, Vol. 29, pp. R3-R10, (1985).

14. M.N. Bassim D. Shum, S.Yannacopoulos, M.R. Bayoumi and M. C. Chaturvedi

“ Metallurgical Aspects of the Wheel/Rail Surface Contact ”, in the Proceedings of International Conference on Surface Modification and Coatings, Metal Congress, Toronto, Canada, October (1985).

15. R.J. Klassen, M.N. Bassim M. R. Bayoumi and H.G.F. Wilsdorf, “Dislocation Cell

Structures Networks during Ductile Fracture of HSLA Steels”, presented at Canadian Metal Physics Conference, Kingston, June (1985).

16. M. R. Bayoumi and M.N. Bassim “ Mechanisms of Dynamic Fracture in 1045 Steel ”,

Proceedings of the 7th International Conference on the Strength of Metals and Alloys, Concordia University, Montreal, Vol. 2, pp. 1181-1186, Aug. (1985).

17. M.N. Bassim and M.R. Bayoumi, “The Observation of Dislocation Networks During

Fracture of Prestrained 4340 Steel”, Proceedings of the International Conference on Low-Energy Dislocation Structures”, University of Virginia, August 10-14, pp. 317-324, (1986).

18. M.R. Bayoumi and M.N. Bassim, “Effect of Microstructure on the Relationship Between

Fracture Toughness and Ductility”, Engineering Fracture Mechanics Vol. 24, No. 1, pp. 111-120, (1986).

19. M. N. Bassim and M.R. Bayoumi “The Observation of Dislocation Structures During

the Fracture of Prestrained AISI 4340 Steel”, Materials Science and Engineering Vol. 81, pp. 317-324, (1986).

20. M.N. Bassim, G. Gadzella, G. Stacey, J. Cuddy and M. R. Bayoumi , “Characterization

of Acoustic Emission from A Model Economizer Header Flow Noise”, Acoustic Emission Group Meeting Kingston, Ontario, Canada,. June (1986).

21. M.N. Bassim, M.R. Bayoumi, T. R. Hus and J.R. Matthews, “Investigation of Dynamic

J 1d for Alloy Steel Weldments Using the Split Hopkinson Bar”. Journal of Testing and Evaluation, Vol. 14, No. 5, pp. 229-235, (1986).


- 10 -


22. R. J. Klassen, M. N. Bassim, M.R. Bayoumi and H.G.F. Wilsdorf, “ Characterization of the Effect of Alloying Elements on the Fracture Toughness of High Strength, Low Alloy Steels ”, Materials Science and Engineering, Vol. 80, No. 1, pp. 25-35, (1986).

23. R. J. Klassen, M.N. Bassim, M.R. Bayoumi and H.G.F. Wilsdorf, “Mechanisms of Plastic Deformation Prior to Ductile Fracture in a Low Alloy Steel”, Materials Science and Engineering, Vol. 83, No. 1, pp. 39-44, (1986).

24. G.M.Gadzella, G. Stacey, J.Cuddy, M.N.Bassim and M.R.Bayoumi “A Software

Approach for Acquisition and Analysis of large Numbers of Acoustic Emission Signals” Presented at Acoustic Emission Group Meeting, Kingston. Ontario, Canada, June (1986).

25. M. N. Bassim, M.R. Bayoumi and D.Shum, “Study of the Variation of Fracture

Toughness with Loading Using Compact Tension Specimens”, Engineering Fracture Mechanics, Vol. 26, No. 4, pp. 619-623, (1987).

26. M.N. Bassim, R.J. Klassen, M.R. Bayoumi and H.G.F. Wilsdorf, “Fracture Topography

of HSLA Steels” Journal of Meterials Science and Engineering, Vol. 91, pp. 107-111, (1987).

27. A.A. Khalil, M.R. Bayoumi and A.G. Abd-El-Shafi, “Friendly User Super BASIC Finite

Element Program for Solving Design and Structure Problems Using Personal Computer”, Proceedings of ISMM International Symposium on “Microcomputers and Their Applications, MIMT87, Cairo, Egypt, March 3-5, (1987).

28. M.N. Bassim and M.R. Bayoumi, “Ductile Fracture Evaluation Under Impact Loading”,

Proceedings of the International Conference on Impact Loading and dynamic Behavior of Materials, Bremen, Federal Republic of Germany, May 18-22, (1987).

29. M.R. Bayoumi “Topographical and Microstructural Changes During the Fracture

of Prestrained High Strength Low Alloy Steel”, Proceedings of the Second International Ain-Shams University Conference on Production Engineering and Design for Development, Cairo, Egypt, Vol. 2, pp. 289-297, December 29-31, (1987).

30. A. A. Naser, S. M. Morsy and M.R. Bayoumi “Dependence of Corrosion Behavior

of Stainless Steel on Surface Roughness under Different Temperatures and NaCL Concentration”, Bulletin of the Faculty of Engineering, Assiut University, Egypt Vol. 16, Part 2, pp 105-120, (1987).

31. M.R. Bayoumi, “On the Development of Plastic Zone and Crack Growth of Short Crack

at Notches in Biaxial. Fatigue”, Bulletin of the Faculty of Engineering, Assiut University, Egypt Vol. 17, Part 1 pp. 115-128, (1988).


- 11 -


32. M.R. Bayoumi, “Study Of Small Scale Plasticity and Stress Distribution Preceding Crack Propagation in Metals”, Bulletin of the Faculty of Eng. Assiut University, Egypt, Vol. 16, Part 2, pp. 121-138, (1988).

33. M.R. Bayoumi “ Characterization of Fracture Toughness of High Strength Low Alloy

Steel Weldments Using Stretch Zone Width Measurements ”, Bulletin of the Faculty of Engineering, Assiut University, Egypt, Vol. 17, Part 1, pp 22-30, (1989).

34. M. R. Bayoumi, “Characterization of Fracture Toughness of High Strength Low Alloy

Steel Weldments Using Stretch Zone Width Measurements”, Journal of Materials Science, Vol. 25, pp 4301-4308, (1990).

35. S.M.H. Darwish A. Abd El-Mageed and M.R. Bayoumi “Computer Aided Design of, Aluminum Holding Furnaces ”, Proceedings of the Third International Ain shams University Conference on Production Engineering and Design Cairo, Egypt, Vol. 1, pp, 53-62, (1990).

36. M. R. Bayoumi, “Towards a Prediction of the Hardness of the Heat-Affected Zone

of Steel Weldments”, Journal of Materials Science, Vol. 26, pp 2716-2724, (1991).

37. A.A.Khalil and M.R. Bayoumi, “Effect of Loading Rate on Fracture Toughness of Bonded Joints”, International Journal of Adhesion and Adhesives, Vol. 11, pp 25-29, (1991).

38. A.M. Aboelnaga, M.R. Bayoumi and F.M. Abd-Elkarim “Experimental Investigation

on The Variation of Modal Parameters For Metallic Adherands Using Different Adhesives”, Proceedings of the 5th Cairo University International Conference on Machine Design and Production, Cairo, Egypt, Vol. 1, pp 594-603 (1991).

39. M.R. Bayoumi “Study of Effect of Some Alloying Elements Additions on Fracture

Toughness of Low Allov Steels”, Proceedings of University of Alexandria International Conference PEDAC 92, on “Developments in Production Engineering, Design and Control”, Alexandria, Egypt Vol. I, pp 153-164, December 27-29, (1992).

40. M.R. Bayoumi, “Quantitative Concepts on the Problem of Need and Production Structure Network, Case Study Analysis of Butane/Propane Filling Plants in Egypt”, Proceeding of AL-Azhar Engineering Third International Conference, Vol. 8, pp. 40-50, (1993).

41. M.R. Bayoumi, “Fatigue Behavior of a Commercial Aluminum Alloy in Sea Water

at Different Temperatures”, Journal of Engineering Fracture Mechanics, Vol. 45, No. 3, pp 297-307, (1993).


- 12 -


42. M.R. Bayoumi and A.K. Abdellatif, “ Effect of Surface Finish on Fatigue Strength ”, Proceedings of the Fourth International Conference on Production Engineering and, Design for Development, Ain Shams University, Cairo, Egypt Vol. 1, pp. 70-82 , December 27-29, (1993).

43. M.R. Bayoumi “ Friction and Bending Effects on the Limiting, Drawing Rations

of Anisotropic Work-hardening Sheet Metals”, The Proceedings of the 1993 American Society for Mechanical Engineers (ASME) Winter Annual Meeting on, Contact Problems and Surface Interactions in Manufacturing and Tribological Systems, PED -Vol 67/ TRIB4 pp. 229-238, New Orleans, Louisiana, U.S.A., Nov. 28- Dec. 3, (1993).

44. M. R. Bayoumi and A.K. Abdellatif, “Comparative Study on the Fatigue Behavior

of An Aluminum Alloy with and Without Superimposed Contact Frictional Force”. The Proceedings of the 1993 American Society for Mechanical Engineers (ASME) Winter Annual Meeting on, Contact Problems and Surface Interactions in Manufacturing and Tribological Systems, PED- Vol. 67/TRI] 34, pp. 285-294, New Orleans, Louisiana, U.S.A. Nov. 28-Dec. 3, (1993).

45. F. Abdelgabar, A. A.Aboukhashaba and M.R. Bayoumi “On The Tensile Strength

of Metallic Dental Material And Natural Tooth Material Adhesive Butt Joint Under Different Bonding Conditions”, Proceedings of the Fourth International Conference on Production Engineering and Design for Development, Ain Shams University, Cairo, Egypt, Vol. 1, pp. 59-69, (1993).

46. F. Abdelgabar, M.R. Bavoumi, and A.A. Aboukhashaba, “ Study of the Shear, Strength

Between Human Enamel and Dentin Pretreated by Acid Etching And Laser Using a New Dentinal Bonding System”, Proceedings of the Fourth International Conference on Production Engineering and Design for Development, Ain Shams University, Cairo, Egypt, (1993).

47. M.R. Bayoumi, “Analysis and Characterization of Fatigue Crack Growth During Fatigue

Fracture in Mild Steel Weldments”, Bulletin of Faculty of Engineering Assiut University, Assiut, Egypt, Vol. 22, Part 2, pp 95-112, (1994).

48. M.R. Bayoumi, “Micromechanisms and Topographical Features During Fatigue Fracture

of a Central Cracked Plain Carbon Steel Plates Having Different Thickness Ratios”, Journal of Engineering Fracture Mechanics, Vol. 47, No. 5, pp 753-768, (1994).

49. A.A.N. Aljawi and M.R. Bayoumi “Vibration Analysis of Adhesively Bonded and Welded

Beams. Experimental Investigation”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut Egypt, Vol. 1, pp. 209-220, December 27-29, (1994).

50. M.R. Bayoumi “On The Mechanics and Mechanisms of Fracture in Stress Corrosion

Cracking of Aluminium Alloys”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt Vol. 22, Part 1, pp 51-58,(1994).


- 13 -


51. M.R. Bayoumi, “Study of the Growth of Fatigue Cracks Propagating Towards the Interfaces of Different Thicknesses in Plain Carbon Steel Plates”, Bulletin of Faculty of Engineering Assiut University, Assiut Egypt, Vol. 22, Part 1, pp 87- 95, (1994).

52. M.R. Bayoumi, “Study of the Growth of Fatigue Cracks Propagating Towards

the Interfaces of Different Thicknesses in Plain Carbon Steel Plates”, Journal of Engineering Fracture Mechanics, Vol. , No. , pp. - (199 ).

53. I.M. Hassab-Allah, M.R. Bayoumi and M.G. El-Sebaie, “ A New Technique for Metallic

Ball Forming ”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut, Egypt, Vol. 1, pp. 227-288, December 27-29, (1994).

54. M.R. Bayoumi, and A.K. Abd El-latif, “ Characterization of Cyclic Plastic Bending

of Austenctic AISI 304 Stainless Steel”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for International Production Assiut University, Assiut Egypt, Vol. 1, pp. 409-423, December 27-29, (1994).

55. M.G.El-Sebaie, Y.M. Abd El-Rahim, M.R. Bayoumi, “Reverse Engineering - An over

View and An Adaptation Necessity to Enhance Engineering-Technology Education and Its Interaction With Industry”, The Proceedings of the First Conference on the Mechanical Engineering and the Advanced Technology of the Industrial Production, “Symposium of the Engineering Education and the Industry” December (1994).

نظرة عامة وحتمية : الهندسة العكسية " محمد رجب بيومى . يوسف محمد عبد الرحيم و د. محمد جاد السباعى و د. د. أ

مطبوعات المؤتمر الدولى األول فى الهندسة " التطبيق لتحسين التعليم الهندسى التكنولوجى وتفاعله مع الصناعة . ١٩٩٤ديسمبر " ندوة التعليم الهندسى والصناعة : " عى بعنوان الميكانيكية والتكنولوجيا المتقدمة لإلنتاج الصنا

56. M.R.Bayoumi and A.K.Abdelatif, “Effect of Surface Finish on Fatigue Strength”,

Journal of Engineering Fracture Mechanics, Vol.51, No.5, PP. 861-870, (1995).

57. M.R. Bayoumi, and A.K. AbdelLatif, “Characterization of Cyclic Plastic Bending of AISI 304 Stainless Steel Beams”, Journal of Engineering Fracture Mechanics, Vol., 51, No. 6, pp 1049 - 1058, (1995).

58. M. R. Bayoumi, “On the Role of Material Selection in Structural Design for Safety

Durability and Fracture Control”, Egyptian Society for Mechanical Engineers, Cairo, Egypt, Vol. -, No. 50, pp 18-28, (1995).

59. M. R. Bayoumi, A. A. Ismail and A. K. Abdellatif, “Towards Understanding the Role

of Pitting in Fatigue Behavior of Plane Carbon Steels”, Journal of Engineering Fracture Mechanics, Vol. 52, No. 1, pp 155-177, (1995).


- 14 -


60. M.R. Bayoumi and A.K. Abdeflatif, “Low Cycle Fatigue Behavior of Notched AISI 304

Stainless Steel Specimens”, Journal of Materials Science, Vol. 30, No. 15, pp 3944-3953, (1995).

61. M. R. Bayoumi, A. A. Ismail and A.K. Abdellatif, “ Finite Element Analysis of Stresses

Due to Pitting of Steel Speciments under Different Cyclic Bending Stresses”, Journal of Engineering Facture Mechanics, Vol., 53. No. 1, pp. 141-115, (1996).

62. M. R. Bayoumi, “The Mechanics and Mechanisms of Fracture in Stress Corrosion

Cracking of Aluminum Alloys”, Journal of Engineering Fracture Mechanics, Vol. 54, No. 6, pp 879-889, (1996).

63. M.M. Abdelghany and M.R. Bayoumi, “ Towards a Comprehensive Methodology

To Solve The General Transport Phemomena Problems”, Proceedings of the III International Congress of Project Engineering, Barcelona and Terrassa, Spain, PP 1395 - 1406, September 12-14, (1996).

64. M.R. Bayoumi, “Quantitative Concepts on the Problem of Needs and Production

Structure Network-Case Study: Analysis of Butane/Propane Filling Plants in Egypt”, Proceedings of The III International Congress of Project Engineering, Barcelona and Terrassa, Spain, Vol.2, pp. 659-669, (1996)

65. M.R. Bayoumi, “Bending and Friction Effects on the Limiting Drawing Ratios

of Conventional and Pressure Assisted Deep Drawing Processes for An Isotropic Work Hardening Sheet Metals”, Bulletin of the Faculty of Engineering, Assiut University, Vol.25, No.1, pp. 35-48, January (1997).

66. M.R. Bayoumi and A.K. Abdellatif , “ Study on the Fatigue Behavior of an Aluminum

Alloy With and Without Superimposed Contact Frictional Force”, Bulletin of the Faculty of Engineering Assiut University, Vol. 25, No.1, pp. 49-60, January (1997).

67. A. A. Nassr, A. A. Khalil and M. R. Bayoumi, “Analysis and Characterization

of the Fracture Resistance of Adhesive Bonded Joints”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt, Vol. 25, No. 2, pp. 161-177, (1997).

68. A. A. Tawfik, A.K. Abdel-Rahman, M.R. Bayoumi, M. G. Morsy and S.F. Shweil,

“ Bagasse Drying: A Review”, Proceedings of the First International Conference On Sugar and Integrated Industries “Present and Future”, Luxor, Egypt, M.R. Mahmoud, K. M. Hassan and M.R. Bayoumi Editors, Vol. 1, pp 289-312, February 15-18, (1999).


- 15 -


69. A. Nezam, M.R. Bayoumi and E. K. Mahmoud, “Study of Transportation Cost and Manufacturing Assignment Problems For a System of Different Production Centers, Different Parts and a Specified Single Assembly Line; Case Study: Casting of Centrifugal Pumps Parts in Egypt's Sugar and Integrated Industries Company”, Proceedings of the First International Conference on Sugar and Integrated Industries “Present and Future ”, Luxor, Egypt, M.R. Mahmoud, K.M. Hassan and M.R. Bayoumi Editors, Vol. 1, pp 337-350, February 15-18, (1999).

70. M.R. Bayoumi, “Experimental Investigation on The Effectiveness of Some Polymer

Coatings During Fatigue of Mild Steel in Aggressive Media ”, Proceedings of The Second International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut, Egypt, Vol.1 pp 264-281, March 2-4, (1999).

71. M.R. Bayoumi, “A Review Article on; Ductile Fracture of High Strength Low Alloy

Steels”, Proceedings of The First Spring School of Current Activities on Materials Science, Organized Jointly by Assiut University and Academy of Scientific Research and Technology with Tohoku University (Japan) and held in Assiut University, Assiut, Egypt, pp 1-19, April 24-28, (1999).

72. M. R. Bayoumi, “A Review Article On; Behavior of Composite Materials Under Cyclic

Loading “ Proceedings of The Second International Spring School On Current Activities of Materials Science, Organized jointly by Assiut University and Academy of Scientific Research and Technology with Tohoku University (Japan) and held in Assiut University, Assiut, Egypt, pp 17- 51, April 22-26, (2000).

73. A.Nezam, M.R.Bayoumi, A.Ezz El-Deen and E.K.Mahmoud, “Study of the Flow Analysis

Techniques to Establish an Efficient Layout of Machines and Workstations for the Manufacturing of Centrifugal Pumps “, Proceedings of the 7th International Conference on Production Engineering, Design and Control, Alexandria University, Alexandria, Egypt, Vol. I , pp 391-408, Feb. 13-15, (2001).

74. A. Nezam, M.R.Bayoumi, A. Ezz El-Deen and E.K.Mahmoud, “Study of the

Transportation Cost and Manufacturing Assignment Problems for a System of Different Production Centers, Different Parts and a Specified Single Assembly Line; Case Study: Casting, Boring and Turning of Centrifugal Pumps Parts in Egyptian Sugar and Integrated Industries Company “, Proceedings of the 7th International Conference of Production Engineering, Design and Control, Alexandria University, Alexandria, Egypt, Vol. I, pp 485-497, Feb. 13-15, (2001).

75. A.H.Amer, M.A.E. Saleh, A.I.Rizk, M. R.Bayoumi and A.A.M.Nassr, “ Utilization of Cast Iron Chip in Powder Production” , Proceedings of the 7th International Conference on Production Engineering, Design and Control, Alexandria University , Alexandria, Egypt, Vol. III, pp 1783-1789, (2001).


- 16 -


76. A.A.Tawfik, Ali K. Abdel-Rahman, M. R. Bayoumi and M.G. Morsy, “ Geometric

Properties, Terminal Velocities and Chemical Composition of The Egyptian Sugar Cane Bagasse”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt, Vol. 29, No. 3, pp. 19-29, September (2001).

77. M.R. Shalabi and M.R. Bayoumi, “ The Leading Role of Assiut University in the

Interaction with the Industrial and Agriculture Development in the South Valley ”, The proceeding of the 3rd Conference on: The Role of the Universities in Community Service and Environment Development in the start of the third Meliniam ”, organized by Cairo University, March (2001).

جامعة أسيوط فى التفاعل مع التنمية الصناعية الدور الريادى ل" محمد رجب بيومى . د. محمد احمد شلبى و أ. د. أالجامعات فى خدمة المجتمع وتنمية " مطبوعات المؤتمر الثالث لجامعة القاهرة بعنوان " والزراعية فى جنوب الوادى لعلمى مارس مفيد شهاب وزير التعليم العالى والدولة للبحث ا/ تحت رعاية األستاذ الدآتور " البيئة مع بداية األلفية الثالثة

٢٠٠١ .

78. A. A. Tawfik, A.K.Abd El-Rahman, M. R. Bayoumi and M. G. Morsy, “Bagasse Drying: Advantages and Merits”, Proceedings of the International Conference on: “Arab Region and Africa in The World Sugar Context”, Aswan, Egypt, M.R.Mahmoud, P. Baron and M. R. Bayoumi Editors, PP TL 304/1 - TL 3.4/14, March 0-12, (2003).

79. A. A. Abbara, A. K. Abd El-Rahman and M. R. Bayoumi, “New Trends in the

Clarification Processes in the Sugar Industry”, Proceedings of the International Conference on: “Arab Region and Africa in The World Sugar Context “, Aswan, Egypt, M. R. Mahmoud, P. Baron and M. R. Bayoumi Editors, pp TL2.1/1 - TL 2.1/35, March 9 - 12, (2003).

80. M. R. Bayoumi, (in Arabic), “ The leading Role of Assiut University in Industrial

Development and its Economical and Environmental Returns”, The Proceedings of The Symposium on: “ Assiut University and South Valley Development”, organized Collectively by El-Ahram Establishment and Asssiut University, pp 95 - 107, August 6, (2003).

" الدور الريادي لجامعة أسيوط فى خدمة التنمية الصناعية ومردوداتها األقتصادية والبيئية " محمد رجب بيومى . د. أ

جامعة أسيوط وتنمية صعيد مصر ، التى نظمها معهد األهرام األقليمى للصحافة بالتعاون مع جامعة أسيوط ، : مطبوعات ندوة ) .٢٠٠٣( أغسطس ٦، ١٠٧إلى ٩٥ص

81. A.A. Abbara, A.K. Abdel-Rahman and M.R. Bayoumi, “ Utilizing of Membrane

Filtration in Sugar Industry “ Proceedings of the Thirty Three Annual Conference of The Egyptian Sugar Technologists, pp 1-14, January (2003).

82. M.R.Bayoumi “Highlights on Some Aspects of Science and Technology on The River

Banks During Ancient Egyptian Era”, Proceedings of The International Conference on: “Assiut University Second International Conference on Great Rivers as Attractors of Local Civilization”, pp 23 -83, October 12 - 14, (2003).


- 17 -


83. A.A. Tawfik, A.K.Abdel - Rahman and M.R.Bayoumi, “Pneumatic Bagasse Dryer

Advantages and Performance (Experimental Study), Proceedings of The Thirty four Anual Conference of The Egyptian Sugar Technologists, pp 1-12, (2003).

84. Dr. Mostafa A. Hamed, Ghassan Al-Sadeg and Dr. Mohamed R. Bayoumi, “ Fininte

Element Analysis of Fatigue Crack Propagation near the Thickness Interface of High Strength Aluminum Alloy ”, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait.

85. Abdul Aziz Abbara, Ali K. Abdej-Rahman, Mohamed R. Bayoumi, “ Production of White Sugar Using Membrane Technology”, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait.

86. Al-Zafer A. Tawfik, Ali K. Abdej-Rahman, Mohamed R. Bayoumi, “ Performance

of Pneumatic Bagasse Dryers ”, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait.

87. M. R. Bayoumi, A. A. Khalil, A. A. Eisa and W. M. Khairaldien, “Characterization

of Copper-Iron Composites Produced By Powder Metallurgy ” Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait.

88. M. R. Bayoumi, A. A. Khalil, A. A. Eisa and W. M. Khairaldien, “Experimental Investigation on the Fracture Toughness of Copper-Iron Composites under Quasi-Static and Dynamic Loading Conditions” Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait.

89. Abdul Aziz Abbara, Ali K. Abdel-Rahman, Mohamed R. Bayoumi, “Microfiltration and Ultrafiltration of Sugarcane Juice in the Production of Plantation”, Third Saudi Technical Conference and Exhibition, Saudi Arabia, Vol 3, December 2004.

90. K. I. Ahmed, M. G. El-Sebaie, M. R. Bayoumi and M. S. Gadala, “ Finite Element Modeling of The Blank-Holding Assisted Spinning of Sheet Metals ”, Journal of Engineering Sciences, Assiut University, Vol. 32, No. 5, PP. 1993-2011, November 2004.

91. K. I. Ahmed, M. G. El-Sebaie and M. R. Bayoumi “Enhanced Finite Element Modeling And its Experimental Verification of The Bank-Holding Assisted Spinning Of Sheet Metals” , Journal of Engineering Sciences, Assiut University, Vol. 33, No. 4,Part B, PP. 1381-1407, July 2005.


- 18 -


ومي . د.أ ب بي د رج ق "محم ى تحقي ة ف ناعات التحويلي ن الص أمول ع ع والم ة للواق ن رؤي ل ع ة عم .92ورق

المى الم اإلس ة والع ة العربي ى المنطق ناعى ف ى والص اع الزراع ل القط تقاتها لتكام يم مش ة وتعظ “التنمية السودان –ندوة المؤتمر العالمى لتحديد أولويات القضايا البحثية فى العالم اإلسالمى بجامعة أم درمان المقدمة فى جمهوري

.٢٠٠٥فبراير ٢٨فى

93. Ali K. Abdel-Rahman, Abdul Aziz Abbara and Mohamed R. Bayoumi, “Numerical modelling of concentration profilesin membrane channel”, Journal of Engineering Sciences, Assiut University, Vol., No. , Part, PP. , 2006.

94. W. M. Khairaldien, A. A. Khalil and M. R. Bayoumi “Production of Aluminum-Silicon

Carbide Composites using Powder Metallurgy at Sintering Temperature above the Aluminum Melting Point” Proceedings of Mechanical Engineering Advanced Technology For Industrial Production fourth Conference, Assiut, Egypt, PP. 438 – 455, December 2006.

95. A. Mostafa, A. Abouel–Kasem, M. R. Bayoumi and M. G. El-Sebaie “Rubber-Filler Interactions and its Effect in Rheological and Mechanical Properties of Filled Compounds” Proceedings of Mechanical Engineering Advanced Technology For Industrial Production fourth Conference, Assiut. Egypt, PP. 359 – 374, December 2006.

96. Ali K. Abdel-Rahman, A. A. Abbara and M. R. Bayoumi “Membrane Filtration in Sugar Industry – Membrane Fouling” Proceedings of World Perspectives for Sugar Beet and Cane as a Food and Energy Crop Conference, Sharm el Sheik, Egypt, P. 11/1 – 11/22 March 2007.

97. M. R. Bayoumi, Mohamed Abuel-Kasem, Mohamed M. Abd Elkader and Essam

Elnagreedy “Air Pollution Control from Sugar Beet Factories” Proceeding of World Perspectives for Sugar Beet and Cane as a Food and Energy Crop Conference, Sharm el Sheik, Egypt, P. 8/1 – 8/6 March 2007.

98. W. M. Khairaldien, A. A. Khalil and M. R. Bayoumi “Mechanical Properties

Characterization of Aluminum – Silicon Carbide Composites Produced Using Powder Metallurgy at Sintering Temperatures above the Aluminum Melting Point” Proceedings of the 10th International Mining, Petroleum and Metallurgical Engineering conference, Assiut. Egypt, PP. 161 – 178 March 2007.

99. W. M. Khairaldien, A. A. Khalil, and M. R. Bayoumi “The DYNAMIC Fracture Behavior

Of An Aluminum – Silicon Carbide Composites Produced Using Powder Metallurgy Method” Proceedings of the 6th Jordanian International Mechanical Engineering Conference (JIMEC’6), Amman – Jordan, 22 - 24 October 2007.


- 19 -


100. W. M. Khairaldien, A. A. Khalil, and M. R. Bayoumi “Production of Aluminum-Silicon

Carbide Composites Using Powder Metallurgy at Sintering Temperatures above the Aluminum Melting Point” Journal of Testing and Evaluation, Vol. 35, No. 6, PP. 655 – 667, November 2007.

101. M.R.Bayoumi " Industry–Academic Interaction : Case Study ; Highlights on Assiut

University Experience in Industrial Development and its Partnership with Sugar and Integrated Industries in Egypt " Proceedings of Egypt- Japan University of science and Technology ( E- JUST). First Symposium on E-Just Japan –Egypt Science and Technology Year JESTY'2008, Alexandria, November 25-27, 2008 – Bibliotheca Alexandrina .

102. A.Mostafa , A. Aboulkasem , M.R. Bayoumi and M.G. El sebaie " The influence of CB

loading on thermal aging resistance of SBR and NBR rubber compounds under different aging temperature" Journal of materials & design Vol. 30 , No. 3 , pp.791-795 , March (2009) .

المقدمــــة ”ـــات التعليــم العالىالجودة واالعتماد فى العملية التعليمية ومؤسس: ورقة عمل عن " محمد رجب بيومى .د.أ .103

عـــــجامعة الساب ٢٠٠٩أبريل ١٨فى فعاليات ندوة الجودة الشاملة بالمؤسسات األآاديمية واإلنتاجية والخدمية فى - ليبيا -مصراته –من أآتوبر

104. A.Mostafa , A. Aboulkasem , M.R. Bayoumi and M.G. El sebaie " Effect of carbon black

loading on the swelling and compression set behavior of SBR and NBR rubber compounds" Journal of materials & design , Vol. 30 , No.5 , pp. 1561-1568 - May (2009).

105. A.Mostafa , A. Aboulkasem , M.R. Bayoumi and M.G. El sebaie " Insight into the effect

of CB loading on tension, compression, hardness and abrasion properties of SBR and NBR filled compounds" Journal of materials & design Vol. 30 , No. 5 , pp. 1785 - 1791, May (2009) .

106. A.Mostafa , A. Aboulkasem , M.R. Bayoumi and M.G. El sebaie "On the fluence of CB

loading on the creep and relaxation behavior of SRB and NBR rubber vulcanizates " Journal of materials & design Vol. 30 , No. 7 , pp. 2721 - 2725, August (2009).

.107المقدمة لإللــقاء فـى الندوة ” قضايا فى الجودة واالعتماد فى التعليم الجامعى: ورقة عمل عن “محمد رجب بيومى./ د.أ ”ـــــالمى ــــالتخطــــيط االستراتــــيجى وضمــــان الجـــودة فى التـــعليم الجامــعى فى العالــــم اإلس“الدوليـــــة حـــول

.ماليزيا - آوااللمبور–الجامعة اإلسالمية العالمية -٢٠٠٩يوليو ٢٢- ٢٠الفتـــرة من فى

”قضايا ومهام وآليات أساسية فى تفعيل الهيئة اإلسالمية للجودة واالعتماد “ :محمد رجب بيومى ورقة عمل عن ./ د.أ .108لجودة واالعتماد ووضــــع أليـــــــات عملــــها فـــى الفترة المقدمة إلى اجتماع خبراء حول تفعـــيل الهــــيئة اإلسالمية ل

. ماليزيا –الجامعة اإلسالمية العالمية ٢٠١٠أبريل ١٠-٨من


- 20 -


109. A. Mostafa, A. Abouel–Kasem, M. R. Bayoumi and M. G. El-Sebaie “Rubber- Filler Interactions and its Effect in Rheological and Mechanical Properties of Filled

Compounds” Journal of testing and Evaluation Vol. 38, No.3. (2010).

110. Prof. Dr. M.R.Bayoumi , " Towards Understanding And Developing The Capacity And Quality Of Human Resources In Education Institutions" presented in the activities of The seminar on Supporting Innovation and Knowledge Transfer in Assiut University,

Tuesday 29 July 2010 Assiut – Egypt . .ISI web of knowledge" 111 تقرير عن النشر العلمى لجامعة أسيوط المنوه عنه فى " محمد رجب بيومى محاضرة بعنوان ./ د. أ

يــوم الثالثــــــاء ”أسيـــــــوط دعــــم االبتكــــــار ونقل المعرفــــــة فى جامعـــــــة “قدمـــــت فى فعاليــــــات ندوة عن .مصر –م أسيوط ٢٩/٦/٢٠١٠الموافق

.112: تقريـر عن النشر العلمى لجامعة أسيـــــوط المنـــــوه عنـــــه فـــــى آًال مـــــــن" محمد رجــــــب بيومى محاضــــرة بعنــوان ./ د.أ

ISIweb of knowledge & Google scholar دوة عن ات ن دمت فى فعالي ا "وق ول اإلط دعوم مشروعات البروتوآ ري السابع الم .مصر –أسيوط –م جامعة أسيوط ٢٩/٩/٢٠١٠يوم األربعاء الموافق " من االتحاد األوروبي

113. M.H. Ata, M.M.Nemat – Alla , M.R. Bayoumi and W . Khair – Eldeen " Fabrication and

Microstructural investigations of Aluminum / steel functionally graded electric transition joint fabricated by powder metallurgy (MMP 03) " Proceedings of the Fifth Assiut University International Conference on Mechanical Engineering Advanced Technology for industrial production , Assiut University , Assiut , Egypt, Vol. , PP . - , March 29-31 (2011).

114 . M.H. Ata, M.M.Nemat – Alla , M.R. Bayoumi and W . Khair – Eldeen " Microstructure

and microhardness investigations of Aluminum / steel functionally graded electric transition joint fabricated by powder metallurgy (MMP04) " Proceedings of the Fifth Assiut University International Conference on Mechanical Engineering Advanced Technology for industrial production , Assiut University , Assiut , Egypt, Vol. , PP . - , March 29-31 (2011).

.115االحتياجات ومقترحات الخطط التدريبية لرفع قـــدرات الجــودة واالعتمــــــاد: ورقة عمل عن “ محمد رجب بيومى./ د.أ، مقدمة لإللقاء فى فعاليات ورشة العمل " بمؤسسات التعليم العالى فى اتحاد جامعات العالم اإلسالمى بشمال إفريقيا

ة عمل تنفيذية لتحديد احتياجات التدريب والتاهيل فى مجاالت تعزيزالجودة واألداء التحضيرية الجتماع خبراء لوضع خط .ماليزيا –آوااللمبور –الجامعة اإلسالمية العالمية -٢٠١١يونيو ٢٨- ٢٧فى الفتـــرة من لجامعات العالم اإلسالمى

116. M.H. Ata, M.M.Nemat – Alla , M.R. Bayoumi and W. Khair – Eldeen, " On Powder

Metallurgical Fabrication and Microstructural Investigations of Aluminum / Steel Functionally Graded Material " Submitted to be published in journal for composites Science and Technology , Vol. , PP . - , (2011).


- 21 -

TTHHEESSIIEESS ((MM..SScc.. //PPhh..DD.. )) LLIISSTTالمجازة والجاريةالمجازة والجارية) ) دكتوراه دكتوراه //ماجستير ماجستير ( ( قائمة الرسائل العلمية قائمة الرسائل العلمية

(( AA )) MM..SScc.. TTHHEESSIIEESS 1- M. R. Bayoumi, M. Sc. Thesis entitled, “Deep-Drawing of Sheet Metals Into a High

Pressure Medium, Assiut University, Assiut, Egypt, (1978).

2- A. A. Ismail, M. Sc. Thesis entitled, “Study of The Corrosion fatigue Resistance For Coated Carbon Steel”, M. R. Bayoumi and A.K. Abd-Elatif (Supervisors), King Abd-Elaziz University, Jeddah, Saudi Arabia, (1993).

3- A. El-Sadeq, M. Sc. Thesis entitled, “Study of The Fatigue Crack Growth at The Thickness

Interfaces of High Strength Aluminum Alloys”, M.R. Bayoumi and M. A. Hamed (Supervisors), King Abd-Elaziz University, Jeddah, Saudi Arabia, (1993).

4- W. M. Khair El-Deen, M.Sc. Thesis entitled, “Study of The Variation of Fracture

Toughness of Particulate-Strengthed Composites Under Different Loading Rates”, M. R. Bayoumi, A. A. Khalil and M.A. Eisa (Supervisors), Assiut University, Assiut, Egypt, (2000).

5- A. A. Abara , M. Sc. Thesis entitled, “Clarification of Raw Cane and Beet Juice Using

Double Stage Forth Method” K.M. Hassan, M. R. Bayoumi and S.F. Shweil (Supervisors), Assiut University, Assiut, Egypt, (2001).

6- A. Nezam, M. Sc. Thesis entitled, “Quantitative Concepts on The Problem of Needs

and Production Structure Network for Planning and Manufacturing of Centrifugal Pumps in Sugar and Integrated Industries Company”, M. R. Bayoumi, A. Khalil and A.E. Abd-Ebrahim (Supervisors), Assiut University, Assiut, Egypt, (2003).

7- A. A. Tawfik, M. Sc. Thesis entitled, “Bagass Drying”, M. G. Morsy, M. R. Bayoumi

and A.K. Abdel-Rahman (Supervisors), Assiut University, Assiut, Egypt, (2003).

8- A. Abdel -Aziz Mohamed, M. Sc. Thesis entitled, “Heat Treatment for cane cutter knifes. And Gears”, M. R. Bayoumi, A.A. Mohamed and M. I. Fahmy (Supervisors), Assiut University, Assiut, Egypt, (2004).

9- A. Mostafa, M. Sc. Thesis entitled, “Effect of Carbon Black Loading on the Mechanical

Behavior of Styrene Butadiene and Nitrile Butadiene Rubber Compounds” M. R. Bayoumi and M.G. El-Sebaie, A. Abo El-Kasem (Supervisors), Assiut University, Assiut, Egypt, (2008).

10- E. A. Elnagridy, M. Sc. Thesis entitled, “The Control of Air Pollution in Sugar Beet

Factories”, M. R. Bayoumi, M. A. Mohamed and M. M. Abdelquader (Supervisors), Assiut University, Assiut, Egypt (In Progress).


- 22 -

TTHHEESSIIEESS ((MM..SScc.. //PPhh..DD.. )) LLIISSTTالمجازة والجاريةالمجازة والجارية) ) دكتوراه دكتوراه //ماجستير ماجستير ( ( قائمة الرسائل العلمية قائمة الرسائل العلمية

(( BB )) PPhh..DD.. TTHHEESSIIEESS 1- M. R. Bayoumi, Ph.D. Thesis entitled, “Study of The Relation Between Fracture Toughness

and Ductility”, University of Manitoba, Winnipeg Manitoba, Canada, (1984).

2- K. Ibrahim, Ph.D. Thesis entitled, “Accurate Cups By Blank Holding Assisted Spinning With Simultaneously Shear Forming”, M.G. El-Sebaie and M. R. Bayoumi (Supervisors), Assiut University, Assiut, Egypt, (2005).

3- A. A. Abbara, Ph. D. Thesis entitled, “Study of Using Membrane Filtration in Clarification

of Sugar Juices”, M. R. Bayoumi, A. K. Abdel Rahman and M. Gad Elrab (Supervisors), Assiut University, Assiut, Egypt (2005).

4- W. M. Khair El-Deen, Ph.D. Thesis entitled, “Study of The Fracture Toughness of Powered

Manufactured Aluminum Matrix Composites Under Different Loading Rates”, M. R. Bayoumi and A. A. Khalil (Supervisors), Assiut University, Assiut, Egypt, (2007).

5- M. H. Atta , Ph.D. Thesis entitled, “ Functionally Graded Electric Transition Joint Design for Aluminium Reduction cell Anode ”, M. R. Bayoumi , M. M. Neamat Allah

and W. M. Khair El-Deen (Supervisors), ( In Progress ) , Assiut University , Assiut , Egypt .


- 23 -

LLiisstt ooff ccoouurrsseess ttaauugghhtt تدريس المقررات الدراسيةتدريس المقررات الدراسيةقائمة قائمة

a) At Postgraduate level • Failures of Engineering Materials and Mechanical Structure • Systems Analysis • Fault Diagnosis in Mechanical Systems • Tribology • Metal Forming in Theory and Practice • Machine Tool Design • Advanced Topics in Machine Design • Advanced Mechanical Engineering Lab • Industrial Maintenance • Mechanical Behavior of Engineering Materials

b) At Undergraduate Level

• Production Engineering • Engineering Drawing • Technical Writing • History of Engineering Sciences and Technology • Engineering Materials and their Applications • Machine Construction • Theory of Machines • Design of Machine Elements • Machine Design • Computer Aided Design • Metal Forming • Mechanical Vibration • Technology and Testing of Materials • Production Engineering and Mechanical Design Laboratories • Fault Diagnosis • Quality Control • Statistical Quality Control

CCoouurrsseess TTaauugghhtt

brief biographical data - assiut university · brief biographical data name: prof. dr. mohamed...

Documents