brief description of construction sequence: 1) · 2020. 1. 1. · brief description of construction...

2
Brief Description of Construction Sequence: The tested model consisted of four circular steel columns with height, diameter and wall thickness of 1000 mm, 244.5 mm and 8 mm, respectively. The ends of the columns were machined (lathed) to ensure the square shape of cut of the samples. Each one of the columns was placed on conical end restrains, to stop the columns from wobbling out of their original position. The construction sequence consisted of the following steps: 1) The bottom conical end restraints were screwed on the shake table. 2) The bottom cylindrical pegs were screwed directly to the bottom conical restraints. 3) The columns were placed.

Upload: others

Post on 24-Mar-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Brief Description of Construction Sequence: 1) · 2020. 1. 1. · Brief Description of Construction Sequence: The tested model consisted of four circular steel columns with height,

Brief Description of Construction Sequence:

The tested model consisted of four circular steel columns with height, diameter and wall thickness of 1000 mm, 244.5 mm and 8 mm, respectively. The ends of the columns were machined (lathed) to ensure the square shape of cut of the samples. Each one of the columns was placed on conical end restrains, to stop the columns from wobbling out of their original position. The construction sequence consisted of the following steps:

1) The bottom conical end restraints were screwed on the shake table.

2) The bottom cylindrical pegs were screwed directly to the bottom conical restraints.

3) The columns were placed.

Page 2: Brief Description of Construction Sequence: 1) · 2020. 1. 1. · Brief Description of Construction Sequence: The tested model consisted of four circular steel columns with height,

4) The slab with the top conical restraints was placed on the columns.