NTSC area

Broadcast and Professional MonitorsBroadcast and Professional Monitors

These monitors accept the widevariety of digital signalsnecessary to allow you thefreedom to produce in whateverformat you choose: 480i, 480p,720p or 1080i.

To provide the highest possiblepicture quality, all BVMmonitors are equipped withCRTs manufactured by Sony,using SMPTE-C standardphosphors*. A new flat surface,16:9 aspect HR Trinitron CRTwas developed exclusively forthe BVM-D24E1WU.

* P-22 phosphors are used in the BVM-D9H1U/D9H5U.

This new BVM monitor seriescan be used in a variety ofapplications.¥ Master monitors:

BVM-D24E1WU/D20F1U¥ Picture monitors:

BVM-D14H1U/D14H5U/D9H1U/D9H5U

¥ Field use:BVM-D9H1U/D9H5U

Multiformat SignalSupport Sony Technology Functionality

Sony's legendary line of broadcast monitors now has a new family of additions. TheBVM-D series digital monitors are optimized for the DTV world. They support 480i,480p, 720p and 1080i inputs directly, with no need for a scan converter. They displayeach input signal at its native frequency and resolution with an extremely high degree ofcolor accuracy. And they incorporate the patented, award-winning Trinitron® CRTsystem to deliver uncompromising quality and detail.

Designed specifically to meet your diverse DTV requirements, while also supporting theinterfaces, infrastructures, and archival formats you are using now.

Only Sony can provide you with the complete line-up Ñ from 24Ó master monitors to 9Ó picture and field-use monitors Ñ that you willneed as you make your transition to digital. And only Sony provides the technology to enable you to continue using your currentmonitors next to your new digital monitors in one integrated system.

¥ 24" and 20" monitors*

¥ Newly developed flat surface, 16:9 aspect HR Trinitron CRT for the 24"master monitor

¥ Resolution of 1000 TV lines (24" in 4:3/16:9 modes) and 900/700 TVlines (20" in 4:3/16:9 modes)

¥ 14Ó and 9Ó monitors*

¥ Display unit (BVM-D14H1U/D9H1U) and stand-alone (BVM-D14H5U/D9H5U) monitors for greater flexibility in system integration

¥ Resolution of 800/600 TV lines (14Ó in 4:3/16:9 modes) and 450/340 TVlines (9Ó in 4:3/16:9 modes)

¥ 9" monitors*

¥ Optional lithium-ion battery packs available for added convenience

¥ Optional Monitor ENG kit (hood and rear protector) available

¥ Audio capability, built-in speaker, and simple stand for added versatilityin the field (BVM-D9H5U only)

* 24Ó, 20Ó, 14Ó and 9Ó refer to the CRT size. For viewable area, measured diagonally, please refer to the specifications.

BVM-D24E1WU display unit with optional BKM-10R and BKM-34H attached

BVM-D14H5U stand-alone monitor

BVM-D9H5U stand-alone monitor with optional VF-508 Monitor ENG kit

Line-upLine-up

Multiformat Signal SupportAll of these monitors accept signals with a frequency range of15.625 kHz to 45 kHz, and each picture signal is directly scanned

from the original signal using the point scan method to achievehigh picture quality.

Only the Sony BVM-D series provides you with models ranging from9Ó to 24Ó that can be controlled in one completely integrated, multi-control system. And, your current E, F, and G series BVM monitorsand HDM series monitors can also be controlled in the same system.

¥ Modular design with separate display and control units¥ Parallel and RS-485 serial remote control capability¥ Up to 32 monitors can be controlled with one control unit¥ Optional rack mounting kits

* Each of the above frame rates is also compatible with 1/1.001.

Acceptable Formats

System Integration

Horizontal Total Active * FrameSystem scanning lines per lines per rate Scanning Aspect Standard

frequency frame frame (Hz) format

575/50i (PAL) 15.625 625 575 25 2:1 interlace 16:9 / 4:3 ITU 601

480/60i (NTSC) 15.734 525 483 30 2:1 interlace 16:9 / 4:3 ITU 601

575/50p 27.000 625 575 50 Progressive 16:9 / 4:3 —

480/60p 28.125 525 483 60 Progressive 16:9 / 4:3 SMPTE 293M

1080/48i 31.250 1125 1080 24 2:1 interlace 16:9 —

1080/50i 31.469 1125 1080 25 2:1 interlace 16:9 SMPTE 274M

1035/60i 33.750 1125 1035 30 2:1 interlace 16:9 BTA S-001B

1080/60i 33.750 1125 1080 30 2:1 interlace 16:9 SMPTE 274M / BTA S-001B

720/60p 45.000 750 720 60 Progressive 16:9 SMPTE 296M

Control Unit BKM-10R

RS-485RS-485RS-485

Superb Picture Reproduction¥ HR Trinitron provides high resolution pictures¥ SMPTE-C standard phosphors* ¥ Sony manufactured CRTs provide excellent color uniformity and

performance¥ Beam current feedback for stable color temperature

*P-22 phosphors are used in the BVM-D9H1U/D9H5U.

FeaturesFeatures

Aspect RatioThe BVM-D24E1WU, with its 16:9 CRT, is capable of displaying both 16:9 and 4:3 formats. The othermodels are all equipped with 4:3 CRTs that are also capable of displaying the 16:9 formats. 16:9 and 4:3 aspect ratio masks are supplied with all monitors except the 24Ó model.

Auto Set-up Capabilities¥ Built-in auto set-up system for chroma, phase, and white balance¥ Precise color temperature adjustment using external color

probes: Sony BKM-14L, Graseby SLS 9400, Minolta CA-100,Philips PM 5639, Thoma TF6

¥ Adjustable color temperature (factory preset to D65)

Interchangeable 16:9 and 4:3 aspect ratio masks

FeaturesFeatures

• Flat surface, 16:9 aspect ratio HR Trinitron CRT developedspecifically for the BVM-D24E1WU

• Optional BKM-12Y Memory Card for storage and recall ofprimary set-up data

• Safe area display, 4:3 area marker (line, translucent mat, fullblack mat)

• Data transfer between monitors using an optional BKM-12YMemory Card or via an RS-485 link

• ISR (Interactive Status Reporting) for system diagnostics

• Built-in test signal generator for crosshatch, 100% whitesignal, 20% gray signal, gray scale, and PLUGE

On-screen Menus for Adjustment and Operation

Digital Uniformity (BVM-D24E1WU only)White can be reproduced uniformly on every point of the screen,even in the peripheral area, through the digital uniformity circuit.This adjustment can be made manually or automatically, with the

use of the optionalBKM-14L Auto Set-upProbe.

Input ConfigurationDepending on the optional boards installed, the settings for thetype and location of the input signals can be made from the InputConfiguration menu.

Flat surface, 16:9 aspect ratio HR Trinitron CRT

Beam Landing Correction (BVM-D24E1WU only)The BVM-D24E1WU is capable of correcting beam landing shiftwhich may occur as a result of the terrestrial magnetic field. Thiscorrection can be made manually or automatically, with the use of

the optional BKM-14LAuto Set-up Probe.

Matrix InterchangeabilityDepending on the input signal, one of three matrices (ITU 601, ITU 709, or SMPTE 240M) can be chosen from the Matrix menu.

Decoder and Expansion Boards for 24”and 20” MonitorsThe BVM-D24E1WU and BVM-D20F1U are equipped as standardwith Analog Component (Y/PB/PR, GBR) input/outputconnectors and four option slots in the rear panel of the monitor.Depending on the particular system requirements, the mostappropriate boards can simply be inserted in the option slots in therear panel of the monitor. A range of input decoder and expansionboards is available to provide many differentinput configurations. Althougheach decoder board has a primaryfunction, when two or more boardsare installed at the same time,they combine to accept a muchwider range of signal inputsand standards.

Separate Control and Display UnitsThe 24Ò and 20Ó monitors are designed as display units. However,an optional BKM-10R Control Unit can be easily attached to thesemonitors with optional attachment kits.

BVM-D20F1U with optional BKM-10R and BKM-32H attachedBVM-D24E1WU with optional decorder and expansion boards

BKM-41HD BKM-42HD BKM-48X* BKM-20D BKM-21D BKM-22X BKM-24N BKM-25P BKM-26M BKM-27T BKM-28XHD SDI HD SDI HD Analog Input SDI 4:2:2 SDI Multi SDI Input NTSC PAL PAL-M Tri-Standard Analog Input

Input Input Expansion Decoder Decoder Expansion Decoder Decoder Decoder Decoder ExpansionAdaptor Adaptor Adaptor Adaptor Adaptor Adaptor Adaptor Adaptor Adaptor Adaptor Adaptor

Component 525/625 - - - - - - - -

Composite NTSC - - - - - - - -

Composite PAL - - - - - - - -

HD SDI - - - - - - - - -

Composite NTSC - -

Composite PAL - -

Composite PAL-M - -

Composite SECAM - -

Y/PB/PR 525/625

GBR 525/625

Y/C NTSC - - - - -

Y/C PAL - - - - -

Y/C PAL-M - - - - -Y/PB/PR, GBR - - - - - - - -1080/48iY/PB/PR, GBR - - - - - - - -1080/50iY/PB/PR, GBR - - - - - - - -575/50pY/PB/PR, GBR - - - - - - - -480/60pY/PB/PR, GBR - - - - - - - -1035/60iY/PB/PR, GBR - - - - - - - -1080/60iY/PB/PR, GBR - - - - - - - -720/60p

Number of digital inputs 1 2 - 3 3 3 - - - - -

Number of analog inputs 1 1 6 3 3 3 6 6 6 6 6

Serialdigitalinput

Analoginput

Input Decorder and Expansion Board Configurations

* Equipped with floating/non-floating ground mode selector for hum reduction Signal can be reproduced with this adaptorSignal can be reproduced when combined with an appropriate decoder

Adaptor name

Signalformat

HD SDI Input Adaptor

◆BKM-142HD- 2 HD SDI signal inputs/1 monitor out

- Power consumption: 9 W

- Dimensions: 49.7 (W) x 161.4 (H) x 121.8 (D) mm (6 3/8 x 4 7/8 inches)

- Mass: Approx. 730 g (1 lb 10 oz)* This board occupies 2 slots

Input Boards for 14“ and 9”MonitorsA new series of four inputboards has been developedspecifically for the 14Ó and 9ÓBVM-D series monitors. Withthree option slots, thesemonitors are able accept a widevariety of input signals.

• 4:3 area marker• Conventional functions, H/V delay, Underscan, Blue

only, Mono are available• Equipped with three color Tally (Red, Green, Amber: R + G)• Mountable into a 19-inch EIA standard rack with

optional mounting brackets• Copy function enables INPUT CONFIG and SYSTEM

CONFIG settings to be copied from other BVM-D14H/D9H monitors connected by serial remote

• Simplified menus for greater ease of use

• Audio capability and built-in speaker in the bottom of themonitor (BVM-D9H5U only)

• Equipped with simple stand (BVM-D9H5U only)• Operate on three alternative power sources: AC power

(supplied adaptor), external DC 12 V, optional Lithium-ionbatteries BP-L60A/L90A (BVM-D9H1U/D9H5U only)

The chart below shows the operation times of the 9Ó monitorswhen run on batteries. Times may vary depending on the picture,condition of the battery and temperature.

Inserted Input AdaptorBattery Analog Component Full options (max)

BKM-129X BKM-142HD + BKM-120D

BP-L60A Approx. 90 min. Approx. 60 min.

BP-L90A Approx. 150 min. Approx. 100 min.

SDI 4:2:2 Input Adaptor

◆BKM-120D- 2 D1 SDI signal inputs/2 active outputs with loop-through- Power consumption: 4 W- Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm

(1 x 6 3/8 x 4 7/8 inches)- Mass: Approx. 310 g (11 oz)

FeaturesFeatures

Analog Component Input Adaptor

◆BKM-129X(supplied as standard with 14" and 9" monitors)

- 1 Analog component (Y/PB/PR, GBR) with loop-through BNC, Automatic 75 ½termination/1 EXT SYNC with loop-through BNC, Automatic 75 ½ termination

- Power consumption: 0.5 W- Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm

(1 x 6 3/8 x 4 7/8 inches)- Mass: Approx. 250 g (9 oz)

NTSC/PAL Input Adaptor

◆BKM-127W- 2 Analog composite with loop-through BNC, Automatic 75 ½ termination/1 Y/C

with loop-through Mini DIN 4-pin, Automatic 75 ½ termination- Power consumption: 3 W- Digital 3-lines Comb filter- Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm

(1 x 6 3/8 x 4 7/8 inches)- Mass: Approx. 270 g (10 oz)

BVM-D9H5U with AC adaptor (left) and optional BP-L60A battery pack (right)

BVM-D14H1U with optional input boards

BVM-D9H1U/BVM-D9H5U

Optional AccessoriesOptional Accessories

Central Control Unit

BKM-10RHand-held Control Unit

BKM-11RMemory Card

BKM-12YAuto Set-up Probe

BKM-14L

19Ó EIA Standard Rack Mount Kitfor 20Ó monitors

BKM-30E20

19Ó EIA Standard Rack Mount Kitfor 14Ó monitors

BKM-31E14

19Ó EIA Standard Rack Mount Kitfor 14Ó stand-alone monitors

BKM-30E14

Control Unit Attachment Kitfor BKM-10R with 20Ó monitor

BKM-32H

Control Unit Attachment Kitfor BKM-10R with 24Ó monitor

BKM-34H

Mounting Panel for EIA Standard Rack (5U)for 9Ó stand-alone monitors

MB-509

19Ó Rack Mount Kitfor BKM-10R

MB-510

Mounting Panel for EIA Standard Rack (4U)for 9Ó display unit monitors

MB-519

19Ó Rack Mount Kitfor 9Ó monitors

MB-520

Monitor ENG Kit (Hood and RearProtector) for 9Ó monitors

VF-508

9-pin Cablefor RS-485/422 serial remote control

RCC-5G/10G/30G

Rechargeable Lithium-ion Battery Packsfor 9Ó monitors

BP-L60A/L90A

NEWNEW

NEWNEW NEWNEW

NEWNEW

SpecificationsSpecificationsBVM-D24E1WU BVM-D20F1U

General Signal format 15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table.)

Type Display unit Display unit

Power requirements 100 to 240 V AC ± 10%, 50/60 Hz

Power consumption 155 W (with OPTION: 205 W max.) 150 W (with OPTION: 210 W max.)

Dimensions mm 565.5 (W) ´ 436.8 (H) ´ 587.3 (D) 444 (W) ´ 414 (H) ´ 570 (D)

inches 22 3/8 ´ 17 1/4 ´ 23 1/8 17 1/2 ´ 16 3/8 ´ 22 1/2

Mass approx. 51 kg (112 lb 3 oz) approx. 38 kg (83 lb 10 oz)

CRT CRT type 24-inch HR Trinitron (flat surface, 16:9 aspect) 20-inch HR Trinitron

AG pitch 0.25 mm, 90¡ deflection, ¯29.1 mm in-line gun 0.30 mm, 90¡ deflection, ¯ 30.6 mm in-line gun

Visual screen mm 4:3 361.6 (W) x 271.2 (H), (452) 386 (W) ´ 291 (H), (482)(Viewable area, 16:9 482.1 (W) ´ 271.2 (H), (553.1) 386 (W) ´ 218 (H), (443)measured diagonally)

inches 4:3 14 1/4 x 10 3/4, (17 7/8) 15 1/4 ´ 11 1/2 , (19)16:9 19 ´ 10 3/4 , (21 7/8) 15 1/4 ´ 8 5/8 , (17 1/2)

Phosphor SMPTE-C SMPTE-C

Inputs/Outputs Video BNC ´ 3, with loop-through

GBR 1.0 Vp-p ±6 dB, positive

Y 1.0 Vp-p ±6 dB, high impedance

PB/PR 0.7 Vp-p ±6 dB, high impedance

Ext sync BNC ´ 1, with loop-through

Composite 0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync

Remote OPTION RS-232C for BKM-11R Mini DIN 8-pin

CONTROL UNIT RS-422 for BKM-10R D-sub 9-pin

REMOTE 1/Serial remote RS-485 serial interface, D-sub 9-pin, with loop-through

REMOTE 2/Parallel remote 1 D-sub 9-pin ´ 1 (Short to ground)

Parallel remote 2 Not Applicable

ISR D-sub 9-pin ´ 1

Video signal Differential gain (DG) Within 5% for luminance from 0 to 100 cd/m2

performanceDifferential phase (DP) Within 5¡ for luminance from 0 to 100 cd/m2

Frequency response 48 Hz to 30 MHz +1 dB/-3 dB

DC restoration Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL

Synchronization Retrace time Horizontal under 3.77 µsec

Vertical under 650 µsec

Raster and picture Normal scan 5% over scan of the effective picture areaperformance

Under scan 3% under scan of the effective picture area

Linearity Less than 0.5% within circle centered on the screenwith a diameter equal to the vertical height, 1.0% at any other point

Color temperature D65/D93/COL 1/COL 2 (User adjustable)

Convergence Less than 0.3 mm within circle centered on the screen with a diameter equalto the vertical height, 0.5 mm at any other point

Preset brightness 100 cd/m2 (30 fL) (when a 1.0 Vp-p 100% white signal is input)

Stability of raster size 1% of picture height (at 100 cd/m2 peak luminescence, 10 to 90% APL)

Scan delay Horizontal Approx. 3/8 line

Vertical Approx. 1/2 field

Center resolution 16:9 1000 TV lines, 4:3 1000 TV lines 16:9 700 TV lines, 4:3 900 TV lines

Operating conditions Operating temperature 0 to 35ûC (32 to 95ûF)Optimum operating range 20 to 30ûC (68 to 86ûF)

Storage temperature -10 to 40ûC (14 to 104ûF)

Humidity 30 to 85 % (no condensation)

Others Supplied accessories 4:3 mask*, AC cable, AC plug holder, Tally label, Fuse, Operation manual

Regulation compliance UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW

* Mask is not supplied for the BVM-D24EIWU.

BVM-D14H1U BVM-D14H5UGeneral Signal format 15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table.)

Type Display unit Stand-alone monitor

Power requirements 100 to 240 V AC ± 10%, 50/60 Hz

Power consumption 100 W (with OPTION: 115 W max.) 100 W (with OPTION: 115 W max.)

Dimensions mm 346 (W) ´ 265 (H) ´ 530 (D) 482 (W) ´ 265 (H) ´ 530 (D)

inches 13 5/8 ´ 10 1/2 ´ 20 7/8 19 ´ 10 1/2 ´ 20 7/8

Mass approx. 21 kg (46 lb 3 oz) approx. 23 kg (50 lb 10 oz)

CRT CRT type 14-inch HR Trinitron

AG pitch 0.25 mm, 90¡ deflection, ¯ 29.4 mm in-line gun

Visual screen mm 4:3 267.5 (W) ´ 200.6 (H), (331.6)(Viewable area, 16:9 267.5 (W) ´ 150.5 (H), (306.9)measured diagonally)

inches 4:3 10 5/8 ´ 8, (13 1/8)16:9 10 5/8 ´ 6, (12 1/8)

Phosphor SMPTE-C

Inputs/Outputs Video BNC ´ 3, with loop-through, 75 ½ auto terminated

GBR 1.0 Vp-p ±6 dB, positive

Y 1.0 Vp-p ±6 dB, high impedance

PB/PR 0.7 Vp-p ±6 dB, high impedance

Ext sync BNC ´ 1, with loop-through, 75 ½ auto terminated

Composite 0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync

Remote OPTION RS-232C for BKM-11R Mini DIN 8-pin

CONTROL UNIT RS-422 for BKM-10R D-sub 9-pin Not Applicable

REMOTE 1/Serial remote RS-485 serial interface, D-sub 9-pin, with loop-through

REMOTE 2/Parallel remote 1 D-sub 9-pin ´ 1 (Short to ground)

Parallel remote 2 Modular connector 6-pin

ISR Not Applicable

Video signal Differential gain (DG) Within 5% for luminance from 0 to 100 cd/m2

performanceDifferential phase (DP) Within 5¡ for luminance from 0 to 100 cd/m2

Frequency response 48 Hz to 24 MHz +0 dB/-3 dB

DC restoration Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL

Synchronization Retrace time Horizontal under 3.77 µsec

Vertical under 650 µsec

Raster and picture Normal scan 5% over scan of the effective picture areaperformance

Under scan 3% under scan of the effective picture area

Linearity Less than 1.0% within circle centered on the screenwith a diameter equal to the vertical height, 2.0% at any other point

Color temperature D65/D93/COL 1/COL 2 (User adjustable)

Convergence Less than 0.4 mm within circle centered on the screen with a diameter equalto the vertical height, 0.5 mm at any other point

Preset brightness 120 cd/m2 (35 fL) (when a 1.0 Vp-p 100% white signal is input)

Stability of raster size 1% of picture height (at 120 cd/m2 peak luminescence, 10 to 90% APL)

Scan delay Horizontal Approx. 1/4 line

Vertical Approx. 1/2 field

Center resolution 16:9 600 TV lines, 4:3 800 TV lines)

Operating conditions Operating temperature 0 to 35ûC (32 to 95ûF)Optimum operating range 20 to 30ûC (68 to 86ûF)

Storage temperature -10 to 40ûC (14 to 104ûF)

Humidity 30 to 85 % (no condensation)

Others Supplied accessories 4:3 mask, AC cable, AC plug holder, Tally label, Operation manual

Regulation compliance UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW

© 1999 Sony Corporation. All rights reserved.Reproduction in whole or in part without written permission is prohibited.

Features and specifications are subject to change without notice.All non-metric weights and measures are approximate.

Sony and Trinitron are registered trademarks of Sony Corporation.

Distributed by

MK7317V2TC99AUG Printed in Japan

SpecificationsSpecificationsBVM-D9H1U BVM-D9H5U

General Signal format 15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table.)Type Display unit Stand-alone monitorPower requirements 100 to 240 V AC ± 10%, 50/60 HzPower consumption 60 W (with OPTION: 85 W max.) 60 W (with OPTION: 85 W max.)Dimensions mm 217 (W) ´ 174 (H) ´ 417.9 (352.5)*1 (D) 217 (W) ´ 217 (H) ´ 417.9 (352.5)*1 (D)

inches 8 5/8 ´ 6 7/8 ´ 16 1/2 (14) 8 5/8 ´ 8 5/8 ´ 16 1/2 (14)Mass approx. 8.1 kg (17 lb 13 oz), 8.9 kg (19 lb 9 oz)*2 approx. 9.3 kg (20 lb 7 oz), 10.1 kg (22 lb 4 oz)*2

CRT CRT type 9-inch HR TrinitronAG pitch 0.25 mm, 70¡ deflection, ¯ 21.6 mm in-line gunVisual screen mm 4:3 155.4 (W) ´ 115 (H), (190.7)(Viewable area, 16:9 155.4 (W) ´ 87.4 (H), (178)measured diagonally)

inches 4:3 6 1/8 ´ 4 5/8 , (7 5/8)16:9 6 1/8 ´ 3 1/2 , (7 1/8)

Phosphor P-22Inputs/Outputs Video BNC ´ 3, with loop-through, 75 ½ auto terminated

GBR 1.0 Vp-p ±6 dB, positiveY 1.0 Vp-p ±6 dB, high impedancePB/PR 0.7 Vp-p ±6 dB, high impedance

Ext sync BNC ´ 1, with loop-through, 75 ½ auto terminatedComposite 0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync

Remote OPTION RS-232C for BKM-11R Mini DIN 8-pinCONTROL UNIT D-sub 9-pin (RS-485/422 switchable) Not ApplicableREMOTE 1/Serial remote RS-485 serial interface, D-sub 9-pin, with loop-throughREMOTE 2/Parallel remote 1 D-sub 9-pin ´ 1 (Short to ground)Parallel remote 2 Modular connector 6-pinISR Not Applicable

Video signal Differential gain (DG) Within 5% for luminance from 0 to 100 cd/m2

performance Differential phase (DP) Within 5¡ for luminance from 0 to 100 cd/m2

Frequency response 48 Hz to 17 MHz +0 dB/-3 dBDC restoration Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL

Synchronization Retrace time Horizontal under 3.77 µsecVertical under 650 µsec

Raster and picture Normal scan 5% over scan of the effective picture areaperformance Under scan 3% under scan of the effective picture area

Linearity Less than 2.0% within circle centered on the screen with a diameter equal to the vertical heightColor temperature D65/D93/COL 1/COL 2 (User adjustable)Convergence Less than 0.4 mm within circle centered on the screen with a diameter equal

to the vertical height, 0.5 mm at any other pointPreset brightness 120 cd/m2 (35 fL) (when a 1.0 Vp-p 100% white signal is input)Stability of raster size 1% of picture height (at 120 cd/m2 peak luminescence, 10 to 90% APL)Scan delay Horizontal Approx. 1/4 line

Vertical Approx. 1/2 fieldCenter resolution 16:9 340 TV lines, 4:3 450 TV lines

Operating conditions Operating temperature 0 to 35ûC (32 to 95ûF)Optimum operating range 20 to 30ûC (68 to 86ûF)

Storage temperature -40 to 40ûC (14 to 104ûF)Humidity 30 to 85 % (no condensation)

Others Supplied accessories 4:3 mask, AC cable, AC plug holder, AC adaptor, Tally label, Operation manualRegulation compliance UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW

*1 Depth without AC adaptor*2 Mass with AC adaptor