brochure clemens technology for row cultures metric

T E C H N O L O G I E S

VINE REMOVALSUBSOILINGPLANTINGCULTIVATINGWEED CONTROLFERTILIZINGSTEM CLEANINGHEADGING DEFOLIATINGPLANT PROTECTIONPRE-PRUNING

FOR A SUCCESSFUL VINEYARD MANAGEMENT

TECHNOLOGYFOR ROW CULTURES

Technical data: HEXAGON 723 HEXAGON 729 HEXAGON 724

Hexagonal base frame Frame width 685 mm 825 mm 1140 mmwith hydr. change in width Frame width 785-1185 mm 925-1460 mm 1240-2100 mmwith chisel and wing share Working width 1185-1585 mm 1325-1860 mm 1640-2500 mmwith chisel and wing share Row width 1500-1900 mm 1600-2150 mm 2000-2900 mm

with Radius SL blade 370 mm Row width 1500-1900 mm 1600-2200 mm 1950-2800 mmwith Radius SL blade 500 mm Row width 1800-2200 mm 1900-2500 mm 2250-3100 mmwith Radius SL blade 620 mm Row width 2000-2400 mm 2150-2700 mm 2500-3400 mm

Widening possible in 400 mm steps. Height 1600 mm, length 1400 mm, weight according to equipment

EXTREMELY SOLID

The massive hexagonal sectional frame is suitable for the hardest ope-

rating conditions. High-quality spring steel gives enormous solidity. The

special wing-chisel share undercuts cover crop without destroying it.

UNIVERSAL

The mounted disc harrow with hydraulically adjustable units is out-

standingly suitable for working in all kinds of cover crop.

SERRATED DISC PLOUGHS

For rational ventilation in the sensitive undervine area with simultane-

ous weed control.

ENORMOUS EFFECTIVENESS

With CLEMENS RADIUS mounted on both sides, the row is cultivated

completely in one run through.

HEXAGON1 2

3 4

CARRIER FOR BIO MULCH ROLLER

The ECO-ROLL knock down the stalks, thereby producing a carpet of

mulch that encourages good shaded composting.

PAGE 3

7

IMPLEMENT CARRIER

Front or rear mounted and also usable as a grubber. Implement carrier for

the hydraulic Radius around-the-vine weeder or rotary brush.

DEEP FERTILIZATION

Through the well directed deposit of fertilizer in the root area, the

nutrients are immediately available to the plants, even in longer pe-

riods of drought. The fine root formation is stimulated and lastingly

improved.

LOOSENING + VENTILATING

C tines made of spring steel for soil tilling with grubber or duck-foot share.

Various combinations make soil cultivation possible all year round.

Tine made of spring steel

80 x 25 with share

Fastening adjustable

Removable wing share

Chisel can be used on both sides

C tines 50 x 22

Grubber share

Duck-foot share

TIP! MORE INFOS ONLINE

WWW.CLEMENS-ONLINE.COM

5 6

8

SB 1 SB 2

Technical data (front and rear mounting): SB 1 SB 2

Light implement frame with hydraulic width adjustment for undervine cultivation for mounting in front and rear. Optionally available with a pump tank hy-

draulic unit. Ideal frame for mounting the modern undervine weeding system Radius SL or rotary brush. SB1 and SB2 are available in two different frames

widths for cultivating rows from 1,30 to 3,20 m with widening up to 3,60 m – depending on the tools.

Weight (without accessories) app. 90 kg app. 170 kgApprox. dimensions L x W x H (mm) (outside spar edges) 550 x 600 x 600 615 x 1010 x 730 For row widths (mm) with Radius blade(mm) 370/500/620 1300-1700/1550-1950/1800-2200 1740-2740/2000-3000/2240-3200

9 10

SB frame (PICTURE FRONTMOUNTING, REAR MOUNTING ALSO AVAILABLE) (PICTURE REAR MOUNTING, FRONT MOUNTING ALSO AVAILABLE)

PR7 PR9

PR7 and PR9

Narrow all-purpose plough with hydraulic width adjustment. It

is particularly suitable for use in nurseries, in vineyards with

narrow spacing between rows and for other row crops.

• robust frame construction

• hydraulic width adjustment

• optional supporting roller

• little power required

• mounting bars at the sides, e.g. for all-around weeders

11 12

Machine width, mm:Machine length, mm:Machine height, mm:Weight, kg:Frame adjustment, mm:Working width, Radius external, mm: Working width, Radius internal, mm:

8001.500675200800 - 1350*1660 - 2220**1360 - 1900**

115015006752501150 - 1700*2000 - 2550** / /

Technical data:

*measured from the outer edges of the bar ** with mounted Radius units with size 370 shares



PR7 PR9

TERACTIV

PAGE 6

FOR ACTIVE SOILS

Technical data:

Weight (kg) (without accessories): app. 260approx. dimensions LxWxH (mm): 2320 x 1070 x 1085(width outside par edges, retracted state)

With Radius SL blade 370 mm: 1800 bis 2300 mmWith Radius SL blade 500 mm: 2100 bis 2600 mmWith Radius SL blade 620 mm: 2300 bis 2800 mm

Overload protection: non-stopOil pressure (bar): 175 Steep-lift: 75°

Extremely solid cultivator for perfect soil cultivation in difficult soil conditions. The special kinematics of the mechanical NON-STOP overload protection

works permanently actively and loosens the soil enduringly. Thanks to the special share form, the tools retract quickly. Existing organic mass can be worked

in effectively. In the course of this the soil is mixed intensively.

Options for the device are a hydraulic steep-lift of 75°as well as widening in 500 mm grids.

13



TERACTIV DUOONE FRAME - TWO SOLUTIONS

PAGE 7

The difference between the Teractiv DUO and the Teractiv is that you

can work along a grass track between the vines even though the culti-

vator is attached.

To make this possible, the frame with its flexible tines lifts up in an

angle of 75 degrees and the roller folds under. This stabilises the frame

when working in the area between vines, as it rests on the grass track.

This allows it to move smoothly and maintains a consistent working

depth in the area around the vines.

The width of the stable frame can be adjusted from 1100 mm to 1600

mm (models that can extend to 2100 mm are also available). The frame

where the Radius is mounted has a hydraulic width adjustment. You

have the option to mount 3, 5, 6 or 7 flexible tines to the frame, depen-

ding on the width of the frame and how loose you want the soil. For row

widths: 1800 mm - 2300 mm

14

WITH ROTARY TILLER WITH CLEARING SHARE

RADIUS SL

RADIUS round-the-vine weeder: the environmentally friendly alternative to chemical weed control. The weeds rot in a natural manner. Less dry stress

through destruction of the capillaries. Soil activation and promotion of optimum soil condition. Sensitive sensor technology for clean work around the vine.

Rear, mid- and front mounting possible, 1 or 2 sided versions. Versatility through different tools in front of the blade and additional devices.

15 16



Technical data:

Oil quantity/device required: 6 - 10 l/minwith rotary weed clearer/device: 21 - 25 l/min

working depth: 50 -100 mm working speed: 5 - 10 km/h

blade length: 370 / 500 / 620 mmweight: app. 33 kg

universally mountable, also on already existing cultivators,flail mowers, hydraulic rotary harrow, etc.

SUBSOILERTLK 883 1-SHANK

Technical data:

Working depth max. mm: 600Width of the vibrating share, mm: 300

19 20

Power HP/kW: 40/30Weight, kg: 260

TRACTOR TRACKS

Very good breaking-up of vehicles tracks, especially in the case of

green areas. Para shares for optimal subsoil loosenin.

WITH CAGE ROLLER AND SOWING MACHINE

WITH PACKING ROLLER

Technical data:

TK100 TK130 TK150 TK175

POWERharrow

17 18

Total width, mm: 1100 1340 1580 1850Working width, mm: 1080 1320 1560 1830

TK100 TK130 TK150 TK175

Weight, kg with cage roller: 444 506 587 616Weight, kg with packing roller: - 569 660 705

Input speed, rpm: 540Power requir. HP/kW: 40/30

TYP M1 AND G1

TYP C1

21

22

Technical data:

pull power requirements

weight:

Width of blade

Work speed

Typ M1 Typ G1

The models M II and G II are available with a second spin roll. To work

with these models a four-wheel drive tractor is required. Further sizes

are possible.

from 110 HP

app. 1000 kg

app. 90/100 cm

bis 10 km/h

from 136 HP

app. 1150 kg

120/130 cm

bis 10 km/h

Technical data:

pull power requirements

Work speed:

length of plant::

capacity range: Harvesting of single and two rows. Oscillating conveying attachment. Hy-

draulic models with own oil supply system. Disc coulter in tight rows.

Videoeye for the driver.

from 66 KW/90 HP

5 km/h

900 mm staggering up to +/-480 mm

single row max. 40.000 plants/h

two rows max. 70.000 plants/h

PLOUGHfor vine remover

NURSERIEStechnology

IPS DRIVE

PLANTINGmachine

23

UNIVERSAL VII24

The IPS-DRIVE is the result of an intelligent conjunction of the possibi-

lities of satellite technique with a planting machine, and is usable for

multiple tasks in any terrain.

Capacity range:Power requirement, KW/HP:Weight, kg:

1200 – 1800 plants/hover 60 / 811600

Technical data:

Light weight planting machine for replanting, planting in the vine nursery

and planting with roots in vineyards. Narrow track tractors from 47 HP.

Technical data:

L X W X H

Work speed:

Weight,kg:

Oil:

210 x 170 x 220 cm

depends on conditions appr. 2,5 km/h

app. 380

25 l/min. Oil via a snap-in valve is required

GSG AN2

GSG N2

SPRAY-25

26

Reason n° 1:

The most important advantage is the recovery of the chemicals that did not

stay on the vine. They are pumped back to the tank and are reused again.

In springtime the savings in chemicals can be up to 70% while later during

the vegetation period when the foliage is closed and dense the savings can

still be up to 20%. So throughout the season a saving of approx. 40% is

possible.

Reason n° 2:

Less drift factor up to 99% at the beginning of the season. It is possible to

work in a less distance to open water.

Reason n° 3:

With a tunnel system you are able to work more independent from wind

and weather. With more than 15 years experience in producing of spraying

technologies, LIPCO has a head start on his competition.

Cross-flow sprayer as damaged end-running wagon

Technical data:

L x W x H: 240 x 240 x 250 cm Distance adjustment: 20 – 110 cm

Row width: 170 bis 240 cmWeight: 1400 kg

Technical data:

L x W x H: 350 x 230 x 210 cm Distance adjustment: 20 - 110 cm

Row width: 170 bis 240 cmWeight: 450 kg

Saddle-mount fan with tanker lorry

TSG -U1 TSG NV2

PAGE 13

TECHNIC27 28

Technical data:

Length of the tunnel wall: 125 cmMax. row hight: 220 cmTunnel width adjustment: 20 to 110 cmMin. row width: Width of the tractor / trailer /saddle-mount+ 80 cm for the treatment of one row+ 120 cm for the treatment of 2 rows

Technical data:

Tunnel-lengths : 125 cmMax. row height : 220 cmTunnel width adjustment : 20 to 110 cmRow width : 180 to 240 cmWeight : 880 kg

SHOOT BINDER TRIMMER

TECHNOLOGY FOR

29 30

Clemens Trimmers offer an impressive range of standard features and

options from the single inverted L shape right through to the Dual mast

Dual over row designs.

Through the three-dimensional adjustment means the shoot binder

can be tailored to the various varieties and design of your vineyard with

simple adjustment.

Technical data:

Oil flow: 10 - 20 l/min Hydraulic pressure: 155 bar

Weight: appr. 62 kgWork speed: up to 7 km/h

Technical data:

Oil flow: 10 l/min Weight: 39 kg

Vertical cutters: from 120 to 190 cmHorizontal cutters: from 30 to 66 cm

LEAF REMOVER PRE PRUNER

PAGE 15

VINE CARE31 32

Clemens Leafers can defoliate and blow clean flower cluster at the

same time. This reduces the fungal infection not only in the grape zone

in general but also in the grapes themselves.

The pruner can be ordered to suit your vineyard due to the modular

design, suit exactly the conditions in your vineyard.

Technical data:

Oil flow: 22 l/min Weight: EL30: 30 kg, EL50: 50 kg

We offer differents sizes: EL 30=30 cm / EL 50=50 cm

Technical data:

Oil flow: 22-25 l/min Cutting high: from 50 cm

to a cordon cut (variable depending upon model selected)

Drift-free application of contact herbicides for the rational removal of

suckers. Additional benefit: Application of soil and leaf herbicides for

weed control in the plant strip

Simple mounting on column lift, front mounted, over-the-row frame,

cultivator or hexagon. Swivelling path and spring pressure adjustable.

Options: Water injection against dust, wire lifting device

Working height (with 22.5° tilt), mm:Oil requirement, l/ha:Weight, kg:

58016 - 2439

SPRAY CHAMBER ROTARY BRUSH

Technical data:

Application quantity, l/ha:Area capacity/hour:Weight, kg:

Technical data:

100 - 300ca 1 ha.25

STEM CLEANING33 34



S5

MULTICLEAN

Weight, kg:Dimensions (mm): length. x deep. x high:Cleaning High:

40760 x 380 x 510 (without protection)from 585 mm with titing of 37,5°

Input speed, rpm:Power required, HP/kW:Titing:

54060 / 45

from 0° to 37,5° adjustable in steps of 7,5°

WEED CONTROL

Technical data:

35

S5 - Column lifter

Compact and robust construction

For various tools

Available in single and double acting

(We recommend to use the S5 with a single acting cylinder

with support wheel for depth control. S5 with double acting

cylinder only for hard soils)

Integrated height adjustment with wheel or bolt

Available in right or left version

2 lifter can be mounted on a hydraulic adjustable-frame-mid

mounted. (the chassis must be adapted to the respective

tractor)

Adjustment of the frame width: 540 mm + optional 200

mm mechanical

ALTERNATIVE TO MULCHING

ECO-ROLL36

Technical data:

Eco-Roll 600* Eco-Roll 800*Eco-Roll 1000Eco-Roll 1200Eco-Roll 1400Eco-Roll 1600Eco-Roll 1800Eco-Roll 2000

Width (mm) external dimension (mm) Weight with 3 point frame (kg)

600 800100012001400160018002000

685 885108512851485168518952095

75** 100**275310355394433525

* (for high clearance tractor) ** (without frame)

The NEW „ECO-Roll“ BIO mulch roller is the

alternative to mulching. The roller can be trans-

ported easily as part of any process.

„ECO-Roll“ compresses the vegetation as the

spades fitted to the roller bend and knock down

the stalks, thereby producing a carpet of mulch

that encourages good shaded composting. The

plants then grow through and produce the next

carpet of organic material. With legumes, this

method stimulates the growth of the rhizobia

and increases nitrogen fixing. Standard width:

1000, 1200, 1400, 1600, 1800 , 2000 mm.

Width 600 et 800 mm are for high clearance

tractor.

VINESCOUTAUTOMATIC STEERING SYSTEM – EASY OPERATION CAN BE USED IN MANY DIFFERENT WAYS

The “VINESCOUT” system is an automatic steering system that can be adap-

ted to all existing types of tractor with hydraulic steering and can be used in

viticulture and fruit-growing with a spacing of 1,5 m and 3,5 m between rows.

The plotting of the row takes place by means of a 3D camera system. The

optimal track calculated is driven along by means of a separate steering valve

with an accuracy of ± 3 cm.

The greatest potentials of the fully automatic “VINESCOUT” tractor steering

system lie in taking the strain of the actual steering process off the tractor

driver thus allowing him to give his attention to stress-free steering of the multi-

row cultivating appliances (foliage work, plant protection).

37

CLEMENS GMBH & CO KG - RUDOLF-DIESEL-STR. 8 - 54516 WITTLICH - GERMANY - TEL: 0049 65 71 - 929 00 - WWW.CLEMENS-ONLINE.COM

T E C H N O L O G I E S

FOR A SUCCESSFUL VINEYARD MANAGEMENT

HISTORYCLEMENS Since its foundation in the year 1952 by Bernard and Mathias Clemens, the CLEMENS Company has been producing vineyard and ag-

ricultural machines with superior strength and durability. The company is family owned and is represented today by Thomas and Bernhard

Clemens, both sons of Bernard. CLEMENS develops, manufactures and distributes high quality, unique and innovative products like the

under vine de-weeder the “RADIUS”, a strong utility frame for different cultivation tools the “HEXAGON”, the „SPRAYING CHAMBER“ and

„ROTARY BRUSH“ for sucker removal, and several more machines for various applications. CLEMENS machines are the key to successful

Vineyard management. Besides special services for winery-technologies, we also supply special tank-designs with equipment and materials

based on the customer’s demand. Individual tasks are always taken care of with total dedication, to ensure our client’s needs are fulfilled.

More than 70% of all products are exported all over the world, which shows the strength and demand of our machines. Currently CLEMENS

is represented in more than 35 countries.

NON-BINDING INFORMATION - TECHNICAL CHANGES RESERVED - WOB - 07/11 - EN

brochure clemens technology for row cultures metric

Documents

width frame width

wing share row width

mmwith radius sl blade

x w x h

hydraulic radius

row widths

mmwith chisel

system radius sl