8/13/2019 Brochure ICAMS

1/2

Tel: 555 555 5555

INTERNATIONAL ADVISORY COMMITTEE

1stInternational Conference

on Advances in

Mechanical Sciences

(CAMS) 2014Januar y 9- 11, 2014

Organized by

Department of Mechanical Engineering

Vardhaman College of Engineering

Hyderabad, Andhra Pradesh

India501218

http://www.vardhaman.orgVARDHAMAN COLLEGE OF ENGINEERING

US Dixit, IIT Guwahati, IndiaR Ganesh Narayanan, IIT Guwahati, IndiaK. Narasimhan, IIT Bombay, IndiaKailas, S. V., IISc Bangalore, IndiaKaran S. Surana, KU, USAHsi-Hsin Chien, CHU, TaiwanRahman, M., NUS, SingaporePS Robi, IIT Guwahati , IndiaS Prashanth, Air Bus, UK

D Chakraborty, IIT Guwahati , IndiaC Subramanian, CTS, Muscat Oman

Banabic D, UCN, RomaniaA Srinivasan, IIT Guwahati , IndiaKung-Jeng Ma, CHU, TaiwanAnugrah Singh, IIT Guwahati, IndiaAVSSKS Gupta, JNTU Hyderbad, IndiaAmaresh Dalal, IIT Guwahati, IndiaNarayanan Menon Komerath, GIT, USAK Ganesh, McKensey, IndiaAMK Prasad, OU Hyderabad, IndiaD Bandopadhya, IIT Guwahati , IndiaSV Raghu Rama Rao, IISc Bangalore,IndiaBale Reddy, UOIT, Oshawa, OntarioSachin D. Kore, IIT Guwahati , IndiaSreekumar M, IIITDM Kanchipuram, IndiaNVS Raju, JNTU Jagityal, IndiaDavies, B.J., Putnoe, UKKSR Krishna Murthy, IIT Guwahati, India

Srinivasa Prakash R, BITS Hyderabad,IndiaN Venkata Reddy, IIT Hyderabad, IndiaM. Ravi Sankar, IIT Guwahati , IndiaP Laxminarayana, OU Hyderabad, IndiaNiranjan Sahoo, IIT Guwahati , IndiaNVS Naidu, GITAM Hyderabad, IndiaG Saravana Kumar, IIT Madras, IndiaP Biswas, IIT Guwahati , IndiaCSP Rao, NIT Warangal, IndiaP. Muthukumar, IIT Guwahati , IndiaKV Narasimha Rao, JK Tyres, IndiaRajiv Tiwari, IIT Guwahati , IndiaKV Chary, NIT Warangal, IndiaSK. Dwivedy, IIT Guwahati , IndiaS Kanagaraj, IIT Guwahati , IndiaCP Padhy, GITAM Hyderabad, India

S Senthilvelan, IIT Guwahati , IndiaV V Rao, SNIST Hyderabad, IndiaSwarup Bag, IIT Guwahati, IndiaTKK Reddy, JNTU Hyderabad, IndiaV Kulkarni, IIT Guwahati , IndiaPerumal A, IIT Guwahati, IndiaM Venu, GITAM Hyderabad, IndiaC. Mallikarjuna, IIT Guwahati, IndiaS N Joshi, IIT Guwahati , IndiaSriram Venkatesh, OU Hyderabad, IndiaAR James, DMRL, DRDO Hyderabad,

IndiaA K Singh, IIT Guwahati, IndiaPVR Ravindra Reddy, CBIT, IndiaNanda Kishore, IIT Guwahati, IndiaJain, VK., IIT Kanpur, IndiaNarayan Rao, MIDHANI Hyderabad,IndiaGunasekera, JS., Ohio University, USAVijayaraghavan, L., IIT Madras, IndiaD Ravi Kumar, IIT Delhi, IndiaPham, DT., Cardiff University, UKDavim, PJ., UA, PortugalK Singh, BHEL, R&D Hyderabad, IndiaK Dutta, BHEL, R&D Hyderabad, IndiaT Srinivas, VIT, VelloreShankar Kalyanasundaram, AustralianNational University, AustraliaDV Ravishanker, TKR Hyderbad, India

GCM Reddy, MGIT, IndiaC Rajendran, IIT Madras, IndiaB Suresh, ARCI, Hyderabad, India

V Kamala, TKR, Hyderabad, IndiaAK Sharma, IIT Roorke, IndiaJ Ramkumar, IIT Kanpur, India

RVSSN Ravi Kumar, NU Guntur, IndiaSridhar S. Condoor, SLU, USA

AYC Nee, NU SingaporeKV Rajulapati, HCU Hyderabad, IndiaM Eswaran, BARC, Mumbai, IndiaJai Kumar, IGCAR, Kalpakkam,. IndiaSK Singh, GRIET, Hyderabad, India

Ratnakar Das, KIIT, Bhubaneswar, IndiaK Srinivas, ASL, DRDO Hyderabad,India

IMPORTANT DATESSubmission of full paper: SEPTEMBER 20 2013

Intimation about acceptance: OCTOBER 30 2013

Submission of

reviewed full paper: NOVEMBER 20 2013

Late date for registration: NOVEMBER 25 2013

PROCEEDINGS AND SOUVENIRThe proceedings of the conference made available in printand CD forms. The conference souvenir , with abstracts of

all papers, will include advertisements also. Tariff for ad-

vertisement in the souvenir:Outside back cover : Rs.50000/- (Indian)

USD 1500 (Overseas)Inside cover page : Rs.40000/- (Indian)

USD 1200 (Overseas)

Full page : Rs.30000/- (Indian),USD 1000 (Overseas)

Half page : Rs.15000/- (Indian)

USD 500 (Overseas)Please note that organizing committee may refuse to pub-

lish an advertisement, if it is felt that it is not in the publicinterest.

SPONSORSHIPOrganizations are requested to sponsor this conference

by contributing Rs.20000/-and above. The contributionwill be acknowledged at suitable places.

REGISTRATION AND ACCOMMODATIONThe registration fee will be Rs.7500/- (Rs. 5000/- for stu-

dent) for Indian and USD 500 for foreign delegates. At

least one author of the accepted paper has to register for

presentation. The participants have to arrange for accom-modation and food on their own. A special conference

dinner will be arranged for the participants.

About 200 rooms will be available in both girls and boyshostels. Please visit for more information and updates

http://www.icams2014.com/

For information, contact

Dr. Perumalla Janaki Ramulu

Phone: +91-9494581470

e-mail: icams2014@vardhaman.org

8/13/2019 Brochure ICAMS

2/2

Vardhaman College of Engineering (VCE), estab-

lished in 1999, with an endeavor to impart high quality

Technical Education and innovative research in the

fields of Engineering Technologies, with emphasis on

industry oriented programs for development of stu-dents as well as faculty.

VCE is affiliated to JNT University, Hyderabad, AP,

India and is approved by the AICTE, New Delhi. To-

day there are 10 departments and B.Tech program is

offered in 7 branches. In addition, institute offers

MBA, MCA and M.Tech programmes. All the seven

branches are accredited by NBA (AICTE). In the

course of continued development towards excellence

the VCE was credited with the status of an Autono-

mous College by JNTU, Hyderabad in 2011. Careers

360 magazine placed VCE as one of the leading col-

leges with AA++ Rating in 2013.

ABOUT THE DEPARTMENTThe Mechanical Engineering Department is estab-

lished in the year 2006. The department is equipped

with well qualified, experi-

enced faculty members, and

well established laboratories.

The department is continu-

ously striving to achieve ex-

cellence in education, aca-

demic and industry oriented

research as well as consul-

tancy work aiming service to the society. The depart-

ment already handled the DST, AICTE, CSIR and

DRDO collaborated project and few more are under

process.

ABOUT THE CONFERENCEIn the present era, Mechanical Sciences are the back-

bone of the economy of a nation. There is a strong

motivation for optimizing the design and manufactur-

ing process using experiments with high precision

equipments and computational techniques for model-

ing the processes. The present conference focuses on

the advances in the field of Mechanical Sciences ap-plied to design, thermal, manufacturing etc. In addition

to contributory papers, the conference aims at inviting

renowned experts for delivering keynote addresses/

ABOUT THE COLLEGE CALL FOR PAPERSThe organizing committee invites papers from academi-

cians and scientists. Both review and research articlesare welcome. A full paper of six pages, including fig-

ures and tables, of an A4 size sheet should be sent by

email to icams2014@vardhaman.org. The status

(selected/not selected) of the paper will be intimated tocorresponding author after peer review. The full papersthus submitted will be included either for oral presen-

tation or poster presentation at the discretion of the

selection panel. All the selected papers will get aDOI

number and will be published in International Journalof Current Engineering and Technology

(INPRESSCO).

The scope of the conference include all the

following areas but not limited to:

Chief PatronDr. T. Vijender Reddy, Chairman

PatronsMr. T. Upender Reddy, Secretary

Mr. M. Rajasekhar Reddy, Vice-Chairman

Mr. E. Prabhakar Reddy, Treasurer

Organizing SecretaryDr. Perumalla Janaki Ramulu

Dept. of Mechanical Engineering, VCE

Joint Organizing SecretariesDr. P. Srinivasa Rao

Dr. S. Deva Prasad

Prof. N. Srinivasa Reddy

Dept. of Mechanical Engineering, VCE

TreasurerDr. B. Venkatesh

Dr. VSV Prabhakar

Mr. Deepak

Dept. of Mechanical Engineering, VCEAdvanced VLSI FabricationAerodynamics

Aerospace Systems and TechnologyAlternative energy

Biomechanics

Composite Materials

Concurrent EngineeringApplications of AI Techniques in De-

sign and ManufacturingApplied Mechanics and DesignAutomationCAD/CAM/CAE

Cellular automataComputational Fluid DynamicsComputations for materials and manu-

facturingCondition Monitoring

Finite element analysis

Heat exchangers

Design and ManufacturingEnergies Expert systemsEnergy ManagementFluid DynamicsFuels and CombustionFuzzy logicGenetic algorithm

Green ManufacturingHeat and Mass TransferHVAC

Industrial Engineering

Industrial TribologyInstrumentation and ControlInternal Combustion EnginesMachine Design

Machinery Dynamics

ManufacturingMaterials Preparation and ProcessingMaterials Engineering

Materials Science

Micro and NanomaterialsMechanical, Automotive and MEMSMicro-Machining

Modeling & Simulation of manufac-turing processesModeling of ProcessesNano-TechnologyNEMSNeural networksNoise and Vibration analysis

Numerical analysis and predictionOptimization of SystemsProcess modeling and simulationRapid Prototyping

Refrigeration and air conditioning

Reverse Engineering

Mechatronics

Renewable and Non-RenewableReverse EngineeringRoboticsSolid and Fracture Mechanics

ORGANIZING MEMBERS

Prof Shobha Rani

Dr Hari Shankar Jain

Dr J V R Ravindra

Prof Y Pandurangaiah

Dr P Sarah

Dr K Hari Krishna

Mr. T V Sheshaiah Naidu

Mr D V Ramana Reddy

Mr. V Sreedhar

Mr. E Manoj Kumar

Ms. K Mani Kumari

Mr. M Suresh Kumar

Mr CH Chandra Mouli

Mr. M. Vishnu Vardhan

Mr. TCS Rao

Mr. MD Asif

Mr. K Madhusudhan Reddy

Mr R Madana Mohana

Mr SK Prashanth

Mr. P Krupakar

Mr S Naresh Kumar

Mr. Ravi Chandra

Mr. M Govinda Reddy

Ms P. Poornima Reddy

Mr. V Mahidar ReddyMr. K Sai RamMr. CH Subba Rao

Mr. A Bhargav

Mr. H Jeevan Rao

Mr. V Raghavender

Mr. G Shiva Krishna

Ms. A AmalaMr. M.Rambabu

Mr.V Anil Kumar

Mr. K Sandeep Kumar,

Mr. B Ramu