brosur ivoclar

7/21/2019 brosur ivoclar

http://slidepdf.com/reader/full/brosur-ivoclar 1/8

Explore our latest collection

The complete nano-optimized restorative system

Tetric®

N-Collection

Tetric®

N-Collection Tetric

® N-Ceram | Tetric

® N-Ceram Bulk Fill | Tetric

® N-Flow | N-Etch | Tetric

® N-Bond Universal



Composite resins for virtually every direct restorative indication. Adhesives that are

easy to apply and offer excellent bond strength. This is what sets the nano-optimized

products of the Tetric® N-Collection apart.

The materials have been shown to demonstrate good clinical performance in the

restoration of teeth since 2007. Irrespective of whether anterior or posterior

restorative procedures are performed, the well-coordinated Tetric N-Collection

range offers a suitable material for any cavity size.

Users will not only benefit from products that have been tried and tested in years of

clinical use. They have the latest technology at their fingertips and thus more room to

manoeuvre in their daily restorative work.

A collection ofwell-coordinated products



In the past, several 2-mm increments had to be applied

until the cavity was filled, which was rather time-

consuming. The new Tetric N-Ceram Bulk Fill posterior

composite now offers fast bulk fills of up to 4 mm.

Its smooth consistency makes the material particularly

easy to shape and sculpt.

A sophisticated concept

Due to the patented light initiator Ivocerin®, even large

4-mm increments can be cured in only 10 seconds (at

≥ 1,000 mW/cm2). Ivocerin is a polymerization booster

incorporated into the standard photo-

initator system of Tetric N-Ceram Bulk

Fill. It offers greater reactivity to

curing lights as compared to

camphorquinone and acyl phospine

oxide (e.g. Lucirin TPO).

Despite the short exposure times, Tetric N-Ceram Bulk Fill

allows for a working time of up to 200 seconds. The inte-

grated light sensitivity filter is responsible for this feature.

It permits shaping and contouring of posterior restora-

tions entirely without time pressure.

Special shrinkage stress relievers reduce the shrinkage

stress that occurs during polymerization. They dampen

the forces exerted during shrinkage like a spring.

Tetric®

N-Ceram Bulk Fill4 MM TO SUCCESS

Conventional 2-mm layering 4-mm layer with

Tetric N-Ceram Bulk Fill

4 mm

Dr Eduardo Mahn, Santiago, Chile

Shrinkage stress (MPa)

1.13

1.55 1.501.39 1.38

Tetric N-CeramBulk Fill

SpectrumTPH*

BrilliantNG*

Filtek Z250* Synergy D6*

1.27

Ceram.X mono+*

R&D Ivoclar Vivadent AG, Schaan, 2012*Not registered trademarks of Ivoclar Vivadent AG



Tetric®

N-FlowTHE ALL-ROUNDER FLOWABLE

Flowable composites are products without which modern

restorative dentistry would be unthinkable. They come in

handy whenever surface affinity is desired. This is where

Tetric N-Flow comes into play.

Tetric N-Flow features optimized viscosity with excellent

flow properties and is thus particularly suitable for use as

a lining material. Moreover, it can be used in Class V

restorations because of its stable consistency that

prevents slumping. The Viscosity Controller is responsible

for this characteristic. At the same time, it regulates the

composite’s viscosity during extrusion.

Tetric N-Flow can be ideally combined with other light-

cured composite restoratives, e.g. Tetric N-Ceram and

Tetric N-Ceram Bulk Fill. The material's outstanding

wetting behaviour allows it to be conveniently applied

in virtually all areas of the cavity.

Dr A. Peschke, Schaan, 2012

Liner in combination with regular-viscosity composites

such as Tetric N-Ceram/Tetric N-Ceram Bulk Fill in Class I

to V restorations

Extended fissure sealing Small fillings of all kinds (Class III and V)



Tetric®

N-Bond UniversalTHE TOLERANT UNIVERSAL ADHESIVE

Selective-enamel-etch technique

• enhances adhesion to enamel

• improves the marginal seal

Self-etch technique

• time-saving• reduces the risk of postoperative sensitivities

Total-etch (etch & rinse) technique

• maximizes adhesion to both enamel and dentin

• improves the marginal seal

One adhesive for every etching technique

Tetric® N-Bond Universal is a single-component, light-curing universal adhesive for direct and indirect bonding pro-

cedures. Its mildly acidic properties make it suitable for all etching techniques: self-etch, selective-enamel-etch and

total-etch.

Suitable for direct and indirect bonding procedures

Due to its special composition, the adhesive Tetric N-Bond Universal is also suitable for indirect restorations, applied

as adhesive in combination with a luting composite. The application protocol is identical for both direct and indirect

indications.

• Low film thickness (approx. 10 µm) that will not impede the accuracy of fit of indirect restorations

• Mild etching effect and therefore compatible with various cementation materials (light- and dual-curing)

• No activator is required for dual-curing luting composites

Apply one layer of Tetric® N-Bond Universal on thetooth surface and agitate for min. 20 s.

Apply phosphoric acid only on the enamel surfaceand leave to react for 15 to 30 s. Subsequently,apply Tetric® N-Bond Universal on enamel anddentin and agitate for 20 s.

Etch both enamel (15 – 30 s) and dentin (10 – 15s) with phosphoric acid. Then apply Tetric® N-BondUniversal on the enamel and dentin surfaces andagitate for 20 s.R&D, Ivoclar Vivadent AG, Schaan, 2013

3 e

t c h i n g t

e c h n i q u e s –

1 a

p p l i c a t i o n p

r o t

o c o l

N E W



Tetric®

N-CollectionDELIVERY FORMS

Tetric N-Ceram Bulk Fill*

Refills

Shade Syringe 1 x 3.5g Syringe 2 x 3.5g Cavifil 10 x 0.25g

IVA (universal A shade) 644171AN

664701AN

644174AN

IVB (universal B shade) 644172AN 644175AN

IVW (white shade for deciduous teeth

and light permanent teeth)

644173AN 644176AN

Tetric N-Ceram/Tetric N-Flow*

Refills

Tetric N-Ceram Tetric N-Flow

Shade Syringe 1 x 3.5g Cavifil 10 x 0.25g Syringe 1 x 2g Cavifil 10 x 0.25g

A1 604025AN 604035AN 604046AN 604056AN

A2 604026AN 604036AN 604047AN 604057AN

A3 604027AN 604037AN 604048AN 604058AN

A3.5 604028AN 604038AN 604049AN 604059AN

A3.5 Dentin 604029AN 604039AN 604050AN 604060AN

A4 604030AN 604040AN 604051AN 604061AN

B2 604031AN 604041AN 604052AN 604062ANB2 Dentin 616877AN 616871AN

B3 616873AN 616867AN

C2 616875AN 616869AN

C3 616876AN 616870AN

D3 616874AN 616868AN

T 604032AN 604042AN 604053AN 604063AN

Bleach I 604034AN 604044AN 604055AN 604065AN

Bleach L 604033AN 604043AN 604054AN 604064AN

Bleach M 616878AN 616872AN

Tetric N-Bond Universal

Refills Contents

VivaPen 1 x 2ml VivaPen

40 x Brush cannulas

20 x Protective sleeves

674175AN

VivaPen 1 x 2ml VivaPen 668222AN

Bottle 1 x 6g bottle 668221AN

Assortment

Starter Kit VivaPen 1 x 0.5ml VivaPen

10 x Brush cannulas

20 x Protective sleeves

668223AN

Accessories

Vivadent Applicators 50 x Applicators 603949

VivaPen Snap-On Cannulas 100 x Brush cannulas 627178

VivaPen Snap-On Cannulas 300 x Brush cannulas 627161

VivaPen Protective Sleeves 300 x Protective sleeves 627492

* Assortment: Please contact your local Ivoclar Vivadent repesentative.



THESE ARE FURTHER PRODUCTS OF THIS CATEGORY:

Ivoclar Vivadent AG Bendererstr. 29494 SchaanLiechtensteinTel. +423 235 35 35Fax +423 235 33 60www.ivoclarvivadent.com

Direct Restoratives

Would you like to know more about the products of the “Direct Restoratives” category? Simply get in touch

with your contact person at Ivoclar Vivadent or visit www.ivoclarvivadent.com for more information.

The cuing light

The smallest LED for every use

Bluephase®

Style

• Every hand – comfortable to hold for men and women

• Every material – universal use due to Polywave® LED

• Every time – optional corded operation due to Click &

Cure

The protective fluoride varnish

Fluor Protector N

Superior protection against dental caries

and erosion

• Effective – immediate fluoridation of enamel• Efficient – immediately ready for use• High-yielding – economical delivery

PREPARE BOND FILL CURE FINISH MAINTAIN

OptraGate® Fluor Protector NOptraPol®Tetric® N-Ceram Bulk FillTetric® N-Bond Universal Bluephase N®

Tetric®

N-Collection forms a part of the “Direct Restoratives” product category. The products of this category cover theprocedure involved in the direct restoration of teeth – from preparation to restoration care. The products are optimally

coordinated with each other and enable successful processing and application.

Latex-free lip and cheek retractor

The gentle solution for a better view

OptraGate®

• Considerably enlarged access to the treatment field• Enhanced patient comfort due to three-dimensional flexibility• Wide range of indications

681979/en/2015-09

brosur ivoclar

Documents