brush it, roll it, spray it - kent blaxill · 2019-01-10 · protective & specialist coatings...

Protective & Specialist Coatings GuideEstablished 1838

Brush it, Roll It, Spray ItWhatever your needs we’ve got it covered!

2

Fontefloor EP100 Water-borne Epoxy Paint

A two-component, water-borne epoxypaint for coating new, and previouslypainted concrete floors and walls.

Multi-purpose paintThe product is recommended for floors inindustrial, workshop, storage, hospital andpharmaceutical industry facilities, where floorsare subjected to moderate mechanical andchemical stress.

M1-approved paintThe product has M1 building materialemission classification for indoor use, andemits extremely low levels of compounds intothe environment.

Easy to usePriming and painting can be done with thesame product. Easy to apply by roller. Water isused for thinning and for cleaning of tools.

This product ismostly used for:

Pharmaceutical premises

Healthcare buildings Food processing industry

Public & Commercial Warehouses

INDEX 3

Terms & Conditions Kent Blaxill terms and conditions ofsale apply. Goods subject to availability, where we run out ofstock a similar item may be offered. Delivery service subjectto availability, within our distribution area. Goods may not bestocked by all branches but are available to order. Kent Blaxill & Co. Ltd, 129-139 Layer Rd, Colchester CO2 9JY. Co. Reg. Nos. 83667 (England) • V.A.T. Reg No. 1023797 90

Interior Walls & Ceilings 4-5

Floor Paints & Primers 6-11

Metal Paint & Primers 12-15

Multi Surface Paints 16-17

Cladding & Roof Coatings 18-22

Fire Protection 24-29

Exterior Masonry 30-35

Hygiene & Mould 36-37

Sports & Safety 38-41

Contact Details 42-43

Kent Blaxill have over 180 years experience inproviding a range of paint coatings to suit allrequirements. Whether its factory maintenance,roof refurbishment, fire protection, steel fabrication,anti-bacterial and food safe requirements oranything else, Kent Blaxill have the solution.

We have a large decorating centre network as wellas a dedicated specialist coatings manager who canprovide technical advice, specifications and free sitevisits to provide the correct recommendation foryour project. The solution can be tailored tospecifically meet your requirements and budget.

Kent Blaxill can recommend approved contractorsand product applicators, if required, to carry outany type of specialist painting work. There arepainting systems available for certain applications,such as roofs and metal work, where a 10 or 15year warranty can be achieved. Kent Blaxill can alsorecommend preparation company’s for blasttracking of floors, grit blasting of walls and metal as well as other types of surface preparation.

Contact your local branchor speak toDanielle Fogarty-Emersonthe Specialist Coatings Manageron 07535 857433 or email [email protected]

CONNECT WITH USwww.kentblaxill.co.uk /KentBlaxill

you can buy protectivecoatings online a.twww.kbcoatings.co.uk

Spray Application 23

4

Zinsser Ceiling Pro 5-in-1Zinsser Ceiling Pro 5-in-1 adheres to any surface andprovides an excellent finish for ceilings. It seals stains(including water and smoke) primes and finishes whilstbridging hairline cracks.

Key features and benefits• Seals, primes, block stains finishes and bridgescracks• For bare and previously painted ceilings• Water Based• Low Tension• Contains a biocide• Flat white finish – non-yellowing• 1 hour recoat time• Ultra-low VOC content

Sizes: 2½LFinishes: MattColour Range: BS4800, RAL, NCS and a range of

manufacturers coloursInterior UseWater Based

Zinsser Grade I Zinsser Grade I is a high performance paint for theinterior decoration of walls and buildings, includingperiod properties, churches, and castles. Perfect foradhesion to difficult substrates and old coatings wherea breathable finish is required such as limewash, limeplaster and distemper. Can also be used on many othersurfaces such as plaster, masonry, woodwork etc.

Key features and benefits• Primer, sealer and finish in one• Quick drying• Non-yellowing• Virtually odourless• Durable and washable

Sizes: 1L, 2½L, 5LFinishes: Flat MattColour Range: BS4800, RAL, NCS and a range of

manufacturers coloursInterior UseSolvent Based

Interior Walls & CeilingsFor specifications on larger

orders contact Danielle

Interior Walls & Ceilings 5

Zinsser Bullseye 1-2-3 Primer SealerStain KillerZinsser Bullseye 1-2-3 is a classic universal interior andexterior, water-based, primer-sealer. It offers low odourapplication, quick drying convenience and excellentadhesion to glossy surfaces.

Key features and benefits• Seals stains, graffiti and tannin bleed• Mould and mildew resistant film• Suitable for galvanised metal as it contains arust inhibitive• Excellent for priming ceramic tiles• Dries in 30 minutes• Tintable

Sizes: 500ml, 1L, 2½L, 5L, 10LFinishes: SatinColour Range: White, grey and tintable to a

selection of dark coloursWater Based

Zinsser Allcoat (Solvent-Based)Allcoat (Solvent-Based) is our ultimate interiorrefurbishment paint. It is a 4-in-1 primer, sealer, stainblocker and finish. It is ideally suited to largecommercial interior applications and offers exceptionalspray-ability, one coat coverage and virtually odour freeapplication. Perfect product for large stained areaswhere one product alone can be used.

Key features and benefits• 4-in-1 primer, sealer, stain blocker and finish• Lightening quick 1 hour drying time• Tintable to any colour• Ideal for airless spray application• Ideal for new plaster and other surfaces withup to 12.5Ph • Virtually odourless

Sizes: 1L, 2½L, 5L, 10LFinishes: MattColour Range: BS4800, RAL, NCS and a range of

manufacturers coloursSolvent Based

on 07535 857433 or [email protected]

Bradite DP5 Floor PaintA hard-wearing polyurethane resin based semi-glossfinish paint with excellent wash and wear resistance,for concrete and wooden floors subject to light tomedium traffic.

Key features and benefits• Tough, hard-wearing film• For use on concrete, wooden and suitableprimed steel floors• Prevents dusting of concrete floors

Sizes: 1L, 2½L, 5LFinishes: Semi-GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursInterior & Exterior UseSolvent Based

Rustoleum Floorcoat PolyurethaneFloorcoat PU (7200) is a single pack easy to applysolvent based urethane modified alkyd floor coating.This coating has a good resistance to abrasion andneutral detergents and is resistant during short contactperiods against lubricating oils, fuel, petrol etc.

Key features and benefits• Extremely durable due to the polyurethane addition• Excellent flow rate• For multiple surfaces including tiles, previouslycoated floors and power floated concrete • Ideal for line marking• Non-slip aggregate can be added to this epoxycoating

Sizes: 2½L, 5L, 10LFinishes: Satin, GlossColour Range: BS4800, RAL, NCS and a range of


6 Floor Paints & Primers

Floor Paints & Primers 7

Blackfriar Polyurethane Floor PaintProtects and transforms floors with an attractive,hard-wearing finish. Ideal for most surfaces, includingwood, concrete, cement, metal and brickwork. Speciallyformulated to resist oil and grease.

Key features and benefits• Ideal for high traffic areas• Can be applied to previously painted surfaces• Highly durable

Sizes: 5LFinishes: GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursPrimary Uses: Exceptionally durable single pack

floor coatingInterior & Exterior UseSolvent Based

Rust-oleum PegakoteThe water based 2-pack epoxy can be applied directlyto most mineral substrates. Pegakote is extremelydurable, making it ideal for garages, warehouses, show-rooms, corridors, covered car parks and workshops.

Key features and benefits• Very easy processing• Good flow rate• Extremely durable• Applies to most mineral substrates• No induction time required• Non-slip aggregate can be added to this epoxycoating

Sizes: 4kg, 15kgFinishes: SatinColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursInterior UseWater Based

BUY ONLINE ATwww.kbcoatings.co.uk


Blackfriar Acrylic Floor Paint Protects and transforms floors with an attractive, hardwearing, tough and durable finish. Ideal for mostsurfaces including wood, concrete, asphalt and tarmacin light traffic areas.

Key features and benefits• Multi surface• Hard Wearing• Attractive finish• Quick drying• Suitable for previously painted surfaces

Sizes: 5LFinishes: Semi-GlossColour Range: BS4800, RAL, NCS and a range of


Bradite Floor PrimerA high performance two pack water based floor primerfor power floated, non-porous concrete and quarry tiles.

Key features and benefits• Recoat time 2½ hours, allowing primer and topcoat to be applied in the same day• Low odour, non-taint, ideal for food areas• Will cover 25m² per litre

Sizes: 5LFinishes: Transparent Interior UseSolvent Based

For specifications on largerorders contact Danielle


Blackfriar High Traffic Floor PaintAn exceptionally hard-wearing high performance,easy-to-clean 2 pack floor coating. Ideal for indoor andoutdoor use. The most durable floor paint in the range,designed for exceptional durability for industrial floors.Very fast curing means that vehicular traffic such asfork lift trucks can use the floor as quickly as 3 daysafter application.

Key features and benefits• Fast curing• Extremely durable• Easy to clean• Resists grease, oil and solutions of acid and alkali



Bradite RapidA single pack polyurethane coating and finish for internal use, for concrete, wood or steel floors.

Key features and benefits• Tough, hard-wearing flexible film• Quick drying• Can be used clear as a floor sealer• Suitable for forklift traffic after 48 hours. Recoatin 8 hours and cures as low as -5°C

Sizes: 5LFinishes: GlossColour Range: BS4800, RAL, and Light Grey,

Cardinal Red & CedarInterior UseSolvent Based


Rustoleum Supergrip TreadsafeCan be applied to almost any surface to give an extracoarse anti-slip surface coating. Treadsafe is finishedwith hard wearing carborundum particles and will easilywithstand very heavy traffic including fork lift trucksand harsh chemicals.

Key features and benefits• Coarse anti-slip surface• Tough, long lasting finish• Easy to apply• One coat finish• Solvent-free and virtually odour-free

Sizes: 5m² PackFinishes: AggregatedInterior & Exterior UseSolvent Based Epoxy Based

Blackfriar Water-BasedEpoxy Floor PaintA two-pack, exceptionally hard-wearing, low-odourheavy duty floor coating, ideal for heavy traffic areas.Outstanding resistance to oil, chemicals, solvents andabrasion.

Key features and benefits• Designed for heavy traffic areas• Can be applied over existing surfaces such aswood, metal, concrete, masonry and asphalt• Excellent resistance to oil, chemicals, solventsand abrasion





Rustoleum 9700 Coldmax RapidA rapid curing & durable floor coat. Suitable forpainting industrial units during winter months as it canbe applied as low as -10°C. This versatile coating issuitable for heavy traffic and resistant to chemicals.

Key features and benefits• Over-coatable after just 4 hours• Apply as low as -10 °C• Certified for direct food contact• Excellent chemical and wear resistance• Easy to clean

Sizes: 2L (only transparent), 2.5LFinishes: GlossColour Range: 4 popular coloursInterior & Exterior UseSolvent Based

Blackfriar Anti-Slip Floor PaintA tough, durable, high opacity floor coating. Containsspecial aggregates for outstanding slip resistance.Suitable for concrete, masonry, tiles, wood and metalsurfaces.

Key features and benefits• Specially formulated for foot and light trafficareas• Aggregated finish for total slip-resistance• Indoor and outdoor use• Hard wearing

Sizes: 1Lt, 2½L, 5LFinishes: Aggregated Colour Range: A selection of colours,

including grey, black and redInterior & Exterior UseSolvent Based


Bradite FastracA modified silicone and polyurethane alkyd coating withrust inhibiting pigmentation for added protection. Thistough, flexible coating is fast drying and can be applieddirect to bare or previously painted metal, wood andsuitably primed non-ferrous metals.

Key features and benefits• Excellent coverage• High opacity• Very good flow out rate• UV-Resistant• Heat resistant to 120°C

Sizes: 250ml, 1L, 5L Finishes: Satin, GlossColour Range: BS4800, RAL, NCS and a range of


Rust-oleum Combi ColorRust-oleum Combi Color is a primer and a topcoat inone that provides protection for years, within minutes. A high quality, one coat maintenance system for metalthat can even be applied directly to rust. This coatinghas excellent opacity and sag resistance leaving nobrush or roller strokes and provides good dryingproperties even at low temperatures.

Key features and benefits• Primer and topcoat in one• For application onto rust, bare metal and wood• One coat hiding, good flow properties• High coverage: 10½m² per litre• For application onto rust, bare metal and wood

Sizes: 1L, 2½LFinishes: Satin, GlossColour Range: BS4800, RAL, NCS and a range of


12 Metal Paint & PrimersFor specifications on larger


Metal Paint & Primers 13

Rust-oleum 7500 Alkythane Single pack high performance anti-corrosion topcoat formetal. Ideal for low temperatures (as low as 5°C). Thesame protection in less layers than other alkyd-systems.Alkythane 7500 offers a long-lasting industrial-dutyprotection. Can be applied onto old coatings or wellprimed surfaces.

Key features and benefits• Rapid curing• Easy to apply and excellent flow rate• Excellent protection up to corrosion class C4• Unique alkyd/urethane formulation

Sizes: 1L, 5L Finishes: Gloss, Satin, Matt, MetallicColour Range: A selection of RAL colours and

tintable to virtually any colourInterior & Exterior UseSolvent Based

Rust-oleum 9200 Rust-O-ThaneRust-Oleum 9200 Rust-O-Thane is a water basedpolyurethane for a very durable and colourfast finishon coated floors, walls and primed metal. Especiallyrecommended where general urethane performancelike excellent weather resistance (UV), easy cleaningand abrasion resistance is required.

Key features and benefits• Very durable, colour and gloss retention• UV-Resistant, ideal for outdoor use• Very easy to clean • Very low odour, can be used indoors• Flexible and impact resistant• Can be used on metal and walls

Sizes: 2.5L, 5L Finishes: SatinColour Range: Transparent Interior & Exterior UseWater Based


Coo-Var HammercoteHammered FinishCoo-Var Hammercote Hammered Finish is a fast-dryingcoating which gives a hard, hammered finish to metalobjects. Coo-Var Hammercote Hammered finish issuitable for applications where a hard, durable, glossfinish is required on metal objects.

Key features and benefits• Can be used without a primer• Hard Wearing and rust resistant• Fast Drying• Heat Resistant up to 150°C

Sizes: 250ml, 1L, 2.5L, 5LFinishes: Glossy HammeredColour Range: A selection of popular coloursInterior & Exterior UseSolvent Based

Blackfriar Enamel PaintAn easy to use, tough, hardwearing gloss enamel finish.Suitable for use on wood, metal and plaster. Ideal foruse on garden tools, plaques, models and all thosesmall jobs.

Key features and benefits• Long lasting finish• Tough and durable• For use on wood, metal and plaster

Sizes: 125ml, 250ml (white & black only)Finishes: High GlossColour Range: A selection of popular coloursInterior & Exterior UseSolvent Based

14 Metal Paint & Primers

Metal Paint & Primers 15

Rust-Oleum 569/580 Quick DryingMetal PrimerSingle pack quick drying metal primer for bare andlightly rusted metal.

Key features and benefits• Recoatable after just 2 hours• Single pack product• Excellent flow

Sizes: 1L, 5LColour Range: Red/Brown and RAL7035Interior & Exterior UseSolvent Based

Rust-Oleum Mathys PegalinkUniversal Adhesion PrimerWater based universal adhesion primer which adheresto many surfaces wood, gypsum, cement, bricks andespecially on smooth and difficult to adhere to surfaceslike: galvanized steel, copper, zinc, polycarbonate, hard PVC.

Key features and benefits• Excellent adhesion• Flexible• UV-resistant• Excellent flow• Single pack product

Sizes: 1L, 2½LColour Range: WhiteInterior & Exterior UseWater Based


16 Multi-Surface

Zinsser Allcoat Exterior -Matt/Satin/GlossZinsser Allcoat Exterior is an ultimate performancepaint that offers supreme protection to all exteriorsurfaces; wood, metal, masonry, plastic, concrete andcladding. The paint is multi-surface, self-priming andcan be applied to previously painted surfaces withoutsanding or priming

Key features and benefits• Fast recoat time – just 1 hour• Self-priming system• Flexible and microporous• Ideal for airless spray application

Sizes: 1L, 2½L, 5LFinishes: Matt, Satin, GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursInterior & Exterior UseWater Based

Rustoleum Color Multi SurfacePaint (7300MS)One coat (Primer & Finish in one) maintenance paint,direct to metal and many substrate, like wood, metal,MDF, masonry, tiles, most rigid plastics (including PVC)old concrete, aged galvanized steel and more.

Key features and benefits• Application on many different substrates• Direct to surface, primer and finish in one• Great adhesion properties • High coverage: 9m² per litre• Excellent opacity • Sag resistance (no brush or roller marks)• 19 Colours, including: Gloss, Satin, Matt version(only the multi-surface version)

Sizes: 1L, 2½LFinishes: Satin, GlossColour Range: BS4800, RAL, NCS and a range of


For specifications on largerorders contact Danielle

Multi-Surface 17

Bradite One CanONE CAN is a single pack, quick drying, low odour,primer/finish coat, with excellent adhesion, stainblocking and anti-corrosive properties. ONE CANprovides protection to many substrates, includinginterior and exterior joinery, metals, building plasticsand cementitious surfaces.

Key features and benefits• All-purpose water-based primer and finish• Blocks and locks stains• Anti-corrosive on all metals• Interior/Exterior durability

Sizes: 1L, 2½L, 5LFinishes: EggshellColour Range: Black, White and BS4800,

RAL, NCSInterior & Exterior UseWater Based

Zinsser Allcoat All SurfaceA multi-surface primer, sealer and finish for interiorapplications. Perfect for large commercial environmentsand ideally suited to airless spraying. One coat is all thatis needed to cover and seal most surfaces includingplastic, wood, masonry, cladding, concrete and metal.

Key features and benefits• Primer, sealer and finish in one• One coat application on most substrates• Ideal for airless spray application• Low reflective matt finish, that camouflagesimperfections• Ideal for suspended ceilings• Very Low Odour

Sizes: 10LFinishes: MattColour Range: BS4800, RAL, NCS and a range of



Rust-Oleum Metal Cladding TopcoatRust-Oleum Metal Cladding Topcoat is a waterbornesatin-gloss acrylic paint, specially designed for use as afinish on metal cladding primed with Metal CladdingPrimer or on any metal surface coated with Noxyde,Peganox or PVDF Primer.

Key features and benefits• Decorative satin topcoat• Easy to clean and maintain• Excellent flow out with brush, roller andairless spray• Good opacity• Long lasting finish and excellent UV-Resistance• Easy to clean and maintain


other manufacturers coloursExterior UseWater Based

Bradite CladitA unique single pack water thinned polyurethane acrylicfinish for long lasting protection of exterior claddingelevations on buildings and structures.

Key features and benefits• UV resistance • Excellent water resistance • Hard wearing and flexible• Quick drying• Suitable for both wall and roof areas• Low VOCs

Sizes: 5LFinishes: Semi-Gloss*Colour Range: BS4800, RAL, NCS and a range of


*Also available as a Gloss finish (Cladit+) solvent based

18 Cladding & Roof

Cladding & Roof 19

Noxyde PeganoxSingle pack water-based elastic coating, optimized forbrush or roller application. This rust preventiveelastomeric coating offers excellent protection andoptimized appearance. With a high resistance to acid,water and salt spray, it is the perfect choice forC5 marine environments.

Key features and benefits• Hard wearing and flexible (200% elasticity)• Designed for brush and roller application• Primer and topcoat in one• Rust preventative coating• Optimized appearance• Impact resistant• Excellent flow

Sizes: 5kgFinishes: Satin GlossColour Range: 14 Popular ColoursExterior UseWater Based

Tikkurila – Temadur 20A high performance two pack polyurethane paint withexcellent weathering and abrasion resistance. Idealfor coating the cladding of industrial and commercialproperties. Can be used as a primer for Temadur 50and 90.

Key features and benefits• Recommended for substrates exposed toweathering and/or chemical stress• Contains anti-corrosion pigments• Can also be used as a single coat system• Suitable surfaces include steel, zinc andaluminium

Sizes: 3L, 10LFinishes: Semi-MattColour Range: BS4800, RAL, NCS and a range of



Noxyde PegarustA rust preventing coating is the solvent-based versionof NOXYDE that can be applied in cold temperaturesdown to 0°C or on damp surfaces. Primer and topcoatin one and can be applied directly onto various metallicsubstrates. It guarantees durable protection through theunique elastic and waterproofing binder technology.

Key features and benefits• Excellent corrosion protection and waterproofing• Applicable in cold temperatures down to 0°Cor on damp surfaces• Protects against cracking and peeling• Prevents rust from spreading• Suitable for corrosion class C5-M (Marineenvironment) according to ISO 12944 • UV-resistant and protects against abrasion

Sizes: 5L, 20LFinishes: GlossColour Range: 10 Popular ColoursExterior UseSolvent Based

Rust-oleum NoxydeSingle pack water-based elastomeric coating withunequaled corrosion protection. Noxyde® forms a thickanticorrosive membrane that offers excellent protectionagainst water, salt spray and aggressive environments.

Key features and benefits• Excellent corrosion protection and waterproofing• Impact resistant• Primer and topcoat in one• Spray application • UV resistant • Flexible and hard wearing• 15 year protection

Sizes: 5kg, 20kg Finishes: Satin, GlossColour Range: 16 popular coloursExterior UseWater Based

20 Cladding & RoofFor specifications on larger


Cladding & Roof 21

Bradite Solar Reflective BitumenA solvent thinned full bodied bituminous coating,pigmented with high quality aluminium flake, for use asa protective coating on properly prepared steel, asphaltand bituminous substrates.

Key features and benefits• Solar reflective bright silver finish which is idealfor roofs and insulation• Fast drying one coat application

Sizes: 5LFinishes: EggshellColour Range: SilverExterior UseSolvent Based

Bradite Bitumen Coat FinishA high build bitumen coating and finish paint forwalls, structural steel, galvanized substrates, concreteand brick.

Key features and benefits• Tough hard-wearing film• Excellent water resistance• Suitable for water immersion (not drinkingwater or fish ponds)

Sizes: 5LFinishes: GlossColour Range: BlackExterior UseSolvent Based


Mathys Dacfill HZQuick drying watertight, durable water-based liquidmembrane for roofs. Forms a lasting elastic coatwithout joint or seams on horizontal roofs. Containsthe Dacfill HZ fleece for extra protection againstmoisture and abrasion.

Key features and benefits• Quick drying 100% watertight system• Resistant to UV radiation, acid rain, heat, frostand pollution• Barely flammable and self-extinguishing• Easy to apply with a brush, roller or airless spray• Vapour-permeable• 15 years maintenance free life expectancy

Sizes: 20kgFinishes: MattColour Range: 3 Popular GreysExterior UseWater Based

Mathys Dacfill Watertight water-based liquid membrane for sloped,cementitious, asbestos, asphalt, bitumen or plastic roofs.Forms a lasting elastic coat without joints or seams onsloping roofs (mins. 5% slope). Suitable for asbestosencapsulation.

Key features and benefits• 100% watertight system• Resistant to UV radiation, acid rain, heat, frostand pollution• Barely flammable and self-extinguishing• Vapour-permeable• Water-based formulation contains no dangeroussolvents• Single pack product

Sizes: 1kg, 5kg, 20kgFinishes: MattColour Range: 5 Popular ColoursExterior UseWater Based

22 Cladding & Roof

Spray Application 23

Graco Mark VThe Mark V is built todeliver a higher flow ratethat lets you get the jobdone faster. It is the idealunit for large paintingjobs, due to its versatilityin applications, it is wellsuited for fire retardantsand plastering jobs alongwith a wide range orprimers and paint.

At Kent Blaxill you will find theequipment you need for spraying a widerange of protective coatings. Whetheryou are spraying high solids, epoxy,urethanes, zinc rich primers, elastomeric,intumescent, automotive, polyurea, orpolyurethane coatings, the equipmentwe sell is designed for durability, highperformance, and precision. We aim toalways match the right sprayerequipment for your coating needs.

Gmax 11 3900Procontractor Ideally suited for highproduction professionalcontractors who demanduninterrupted perfor-mance with freedomfrom electrical power.Ideal unit to spray a fullrange of coatings onresidential, commercialand industrial jobs. Canspray acrylics, primers,emulsions, waterborneand solvent based paints.

Contact your local branch for spray sales. A range of tips and accessoriesare also available, please check stock availability with your local branch.


Thermoguard ThermocoatThermocoat W is a water-based intumescent paintsystem providing fire resistance to structural steel andcast iron of up to two hours with a minimum number of coats.

A compatible decorative overcoat system ensures thesystem will enhance the building’s architectural anddesign features.

Key features• Water based Intumescent for structural steel• Thermocoat W may be applied by brush, rolleror airless spray• Thermocoat Flame Retardant Finishes areavailable in a wide range of colours and finishes

Nullifire S707 Intumescent BasecoatS707-60HF Intumescent Basecoat is a white thin filmintumescent coating for the fire protection of internalstructural steelwork.

S707-60HG provides effective structural fire protection,for steelwork, from 30 minutes up to 90 minute firerating.

Key features and benefits• Water based intumescent coating suitable forinternal use on structural steelwork engineeredfor 60 minute fire resistance• Can provide 90 minute fire protection in someapplications• Compatible with a full range of Nullifire primersand top seals• Very low VOC

24 Fire ProtectionFor specifications on larger


Fire Protection 25

Bolloms Flameguard UltraFlameguard Ultra is a Class 0 rated protective anddecorative top coat for interior walls and trim. It is aseasy to use as conventional paints and provides a highquality durable finish. Can be used to upgrade broadwalls, ceilings and trim to class 0 fire rating.

Key features and benefits• Class 0 fire rating• For interior walls and trim• Hard-wearing protective / decorative finish• Water-based

Bollom Brosteel Ultra 60Brosteel Ultra 60 is a thin-film waterborne intumescentcoating designed to provide 30 and 60 minutes fireresistance on standard structural steel members ininternal environments.

Key features and benefits• Water-based• For internal environments• In a fire, the Intumescent base coat softens andexpands to form a carbon foam layer, whichinsulates and protects the structure fromintense heat• No specialist application skills needed – easy toapply by brush or airless spray• Fast drying times


Thermoguard Thermoproof FluidFire protection for porous internal and external timber.Thermoproof Fluid is clear, colourless, penetrating fireprotection fluid for timber.

Key features and benefits• Upgrades to Class O fire rating with just onecoat• Interior/exterior use• Thermoproof can be applied over water-basedpenetrating wood dyes that do not make woodwater-proof.• Compatible with most paint finishes includingvarnish, woodstains, gloss and eggshell finishes. • Thermoproof Fluid is clear and colourless

Thermoguard Fire VarnishThermoguard Fire Varnish Exterior Overcoat is part ofa varnish system with the option of a clear or stainedfinish for Fire Protection of timber and timberderivative substrates.The special formula provides a tough, durable finish tointernal and external wood. Clear or stained finishesenhance the natural beauty of the wood while fireprotecting new and previously varnished surfaces. FireVarnish Overcoat helps protect against UV, weatherand wear.

Key features and benefits• Upgrades to Class O Fire Rating• Interior and exterior use• Water-based low odour formulation• Matt or satin finish• Wash, weather & UV resistant overcoat

26 Fire Protection

Fire Protection 27

Zeroflame Fire Retardant TreatmentNever before has there been such a simple product touse for the protection of timber against fire! To say thatZeroflame Fire Retardant Treatment is revolutionary isan understatement.

Key features and benefits• Will protect timber substrates to Euro-class Bcertification standard• Internal and external use• Achieves Class O on solid timber• Moisture resistant• Unaffected by wear• Simple specification• Overcoat with any paint finish including varnish,woodstains, glass, eggshell etc. • Clear finish leaves timber looking natural • Non-specialist application• Water-bore• Application by brush, roller or spray• Certificate application included with eachcontainer

Thermoguard Smoke & FlameRetardant Wallcoat – Walls & CeilingsWallcoat SFR is a protective decorative finish to applyover Wallcoat Intumescent Basecoat.

Key features and benefits• Upgrades Multi-Layer Painted Walls & Ceilingsto Class B s1 dO and Class O• Available in an Acrylic Matt or Acrylic Eggshellfinishes in the full RAL, BS and NCS colourranges• Fire Certification issued on completion of project


Envirograf HW 30/60 MinuteUpgradingA range of clear or white intumescent coatings, ideal forupgrading existing timber surfaces to either 30 or 60minutes integrity. Can be easily applied internally orexternally by brush, roller or spray.

Key features and benefits• A lasting solution for internal and externaltreated or untreated timber. Can be used onMDF board, plasterboard, timber and a widevariety of wood-derived products, includingdoors, flooring and furniture• Perfect for upgrading existing wooden doors to30 or 60 minute fire doors• With the use of the Envirograf primer, coatingscan be applied on painted or varnished surfaceswith no need to strip them beforehand• Provides UV protection for external timbersurface

Zeroflame Aquasteel WB+Fire resistant Aquasteel WB+ intumescent coatingprovides an easier and more efficient alternative tocladding steel members in plasterboard.

Key features and benefits• Can protect most standard steel sizes• Achieves both 30 and 60 minutes fire resistanceon structural steel• Waterborne • Can be applied by brush, roller or air-less spray• Simple specification• Full specification and application details includedon container label

28 Fire ProtectionFor specifications on larger


Fire Protection 29

Bolloms Intulac Ultra FireRetardant VarnishThe Bollom Intulac Ultra Varnish system provides ahigh-performance fire protection coating system forinterior wood surfaces. It comprises a clear, transparent,water-based intumescent base coat – designed to forma protective carbon char in the event of fire, delayingthe inflammation of the wood – and a clear,transparent, solvent-based protective top coat.

Key features and benefits• Can be applied over existing varnish• Single pack products so no mixing required• Simple 3 coat system to achieve Class 0

(NB: Must be over-coated with Intulac Ultra Top Coatafter 48 hours and a maximum of 4 days)

Envirograf EP/CPA white, fire-resistant coating system, offering fireprotection to plasterboard or lath and plaster ceilingsand walls of various thickness. Provides an excellentsolution for projects where plasterboard features are inneed of fire rating but cannot be replaced, as is oftenthe case in listed buildings.

Key features and benefits• Designed for application to 9mm or 12½mmthick plasterboard, 18mm & thicker lath andplaster, or concrete walls and ceilings• Provides 1 hour of integrity and insulation• Dries to smooth or stippled decorative finish• Ideal solution for upgrading the fire rating oforiginal features in Graded historical buildings


Zinsser All Weather ExteriorMasonry PaintAn ultimate performance, exterior masonry paint thatcan be used on bare or previously painted masonry atlow temperatures.

Key features and benefits• Contains a biocide to protect against fungaldegradation• 15 year performance• Flat matt breathable finish• Resists dirt accumulation• Can be applied to -5°C• Shower-proof in 20 minutes, 3 hour recoat• For bare or previously painted concrete, render,stone and brickwork

Sizes: 5LFinishes: Flat MattColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursExterior UseSolvent/Pliolite Based

Mathys Murfill WaterproofingElastic and waterproof coating for the beautificationand waterproofing of exterior walls and facades. Themicroporous structure ensures that the base isconstantly able to breathe.

Key features and benefits• 100% waterproof coating, 400% elastic• Water vapour permeable• Protects reinforced concrete againstcarbonisation and corrosion• Excellent resistance against ageing in normal andindustrial environment • Combine with Murfill fleece for additionalreinforcement and for bridging of (active) cracks• Breathable product suitable for Lime Renderwhen primed first with Primer 44HS

Sizes: 1, 6, 15, 25kg (1, 25kg white)Finishes: MattColour Range: BS4800, RAL, NCS and a range of


30 Exterior Masonry

Exterior Masonry 31

Zinsser Allcoat Exterior Satin –Solvent BasedGives excellent resistance against cracking, blisteringand flaking for up to 15 years. The tough finish isresistant to rain and severe weather. It offers excellentcolour retention and the paint contains a biocide toprotect the dried coating against fungal degradation.

Key features and benefits• 15-year performance • Multi surface application• Can be applied at 5°C• Shower resistant after 1 hour• Overcoat after 3 hours• Weather Resistant • Excellent colour retention

Sizes: 1L, 2½L, 10LFinishes: SatinColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursExterior UseSolvent Based

Mathys Murfill RenovationMatt and long-lasting elastic renovation paint. Idealfor renovation and decoration of historical and newbuildings, providing excellent resistance against ageingin normal and industrial environment.

Key features and benefits• 500% elastic; protects in any weather• Permanently elastic until -30°C• Excellent resistance against dirt pickup thanks toits unique formulation• Water vapour permeable• UV-resistant and protects against abrasion

Sizes: 1kg (only white) 6kg, 15kgFinishes: MattColour Range: BS4800, RAL, NCS and a range of



Bedec Extra-Flex Masonry PaintIdeally suited for the protection of exterior masonry,roughcast, pebble-dash, brickwork, cement and concreterendered surfaces. It can be applied to previouslypainted surfaces after suitable preparation. This modi-fied acrylic blend is a flexible microporous protectivecoating that will flex with the substrate where movementcauses cracking in conventional masonry paint.

Key features and benefits• Water-based and quick drying• Fine crack bridging• Flexible up to 400% • Long lasting • Microporous

Sizes: 5LFinishes: MattColour Range: 20 manufacturers colours, and

tinting by requestExterior UseWater Based

Zinsser Perma-White Exterior A unique, mould and mildew proof formulation, itcontains a biocide that protects the dried coatingagainst fungal degradation. In addition, the paint film isdesigned to resist cracking, peeling and blistering for upto 15 years. Ideal for areas subject to mould growth,high humidity and condensation.

Key features and benefits• Can be applied to masonry, metal, woodwork,plastic, UPVC etc• Great choice of finish depending on the surface• Ideal for commercial and residential interiors • Low odour• Self-priming, no sanding involved• Washable and scrubbable

Sizes: 1L, 2½L, 5LFinishes: Satin, Semi-GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursPrimary Use: Mould and mildew proof finishWater Based

32 Exterior MasonryFor specifications on larger


Exterior Masonry 33

Wethertex PP15 - PlioliteMasonry PaintWethertex PP15 Pliolite Based Fine Texture MasonryPaint is a premium, solvent-borne masonry paint that isbrush, roller or spray applied. It provides a self-stabilisingfine texture matt finish that has excellent adhesion topreviously painted surfaces.

Key features and benefits• Formulated for exterior use on cementrendering, brick, roughcast, concrete andpreviously painted surfaces.• Excellent adhesion to previously painted surfaces• Self-stabilising• Can be applied all year round

Sizes: 5LFinishes: MattColour Range: A range of manufacturers coloursExterior UseSolvent Based

Wethertex SP77 SiliconeMasonry PaintWethertex SP77 Masonry Paint is a premium qualitySilicone, resin based, ready to use, high performance,paint that is highly vapour permeable. Designed to givean ultra-high weatherproof finish whilst allowing thesubstrate to breathe.

Key features and benefits• Excellent coverage rates• Vapour permeable• Excellent adhesion• Self-Cleaning• Ultra-waterproofing

Sizes: 5L, 10LFinishes: MattColour Range: A range of manufacturers coloursExterior UseSilicone, Resin Based


KEIM SoldalitA modern, innovative mineral paint which creates light-fast and UV resistant coatings with enhanced condensa-tion resistance which are extremely durable and resistantto weathering. Ideal for application onto both previouslypainted and mineral substrates, combining the benefits ofa classic mineral paint with simplicity of application.

Key features and benefits• Water vapour permeable, non-film forming,micro-porous and water repellent • High weathering resistance • Non-flammable • Lightfast • No solvents and plasticisers added • Resists algal and fungal growth

Sizes: 5kg, 25kgFinishes: MattColour Range: 350 Standard colours with

specials availableExterior UseWater Based

Wethertex HBS – Flex-coatHi-Build CoatingA high-quality silicone based, ready to use high build,flexible wall coating, suitable for many substrates,including masonry, existing coatings (well adhered)plaster and building board.

Key features and benefits• Tough, weatherproof finish• Highly flexible and anti-crack• Textured finish• Advanced 20 Durability• One coat application• Suitable for application by hawk & trowel, and spray

Sizes: 15kgColour Range: A range of manufacturers coloursExterior Use

34 Exterior Masonry

Exterior Masonry 35

KEIM Soldalit MEA variation of KEIM Soldalit which offers sustainableexterior protection for buildings with the additional envi-ronmental benefit that it helps to degrade nitrogen oxidepollutants from the atmosphere. Ideal for applicationonto both previously painted and mineral substrates

Key features and benefits• Water vapour permeable, non-film forming,micro-porous and water repellent • High weathering resistance • Non-flammable • Lightfast • Reduces toxic gases (e.g. NOX, VOCs)and organic pollutants• No solvents and plasticisers added • Enhanced resistance to algae and fungal growth



KEIM RoyalanA mineral silicate-based paint system developed to with-stand harsh climatic conditions, ideally suited for use inexposed locations, tropical regions, and those subject tocontinual pollutants and contaminants. Ideal for coatingceramic and hard substrates such as tiles and brickwork.

Key features and benefits• Water vapour permeable, non-film forming,micro-porous and water repellent • Resists extreme climatic conditions• High weathering resistance • Non-flammable • Lightfast • No solvents and plasticisers added • Resists algal and fungal growth




Bradite - HD Floor & Wall EW99A two-pack water based epoxy coating and finishpaint, for concrete, steel, ceramic and terracotta tiles.With it’s easy to clean finish features it is ideal forhygiene sensitive areas, hospitals, food preparationareas, breweries and bakeries etc.

Key features and benefits• Extremely hard wearing and easy toclean/decontaminate• No odour or tainting when in use.• Superior resistance to fork-lift traffic andchemicals• Mould and mildew proof finish

Sizes: 5LFinishes: GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursWater Based

Zinsser Perma-White Interior/ExteriorA unique, mould and mildew proof formulation, containsa biocide that protects the dried coating against fungaldegradation. Paint film is designed to resist cracking,peeling and blistering for up to 7 years. Ideal for areassubject to mould growth, high humidity and condensation.

Key features and benefits• Can be applied on broad walls, ceilings, wood-work, plastic and metal. Great choice of finishdepending on the surface. Perfect for bedrooms,bathrooms, kitchens, swimming pool areas etc. • Ideal for commercial and residential interiors • Low odour• Self-priming, no sanding involved• Washable and scrubbable

Sizes: 1L, 2½L, 5LFinishes: Matt (interior), Satin, Semi-GlossColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursPrimary Use Mould and mildew proof finishWater Based

36 Hygiene & MouldFor specifications on larger


Hygiene & Mould 37

Biosan Aqua Hygienic Wall CoatingSingle-pack, water-based, vinyl acrylic, decorativehygienic coating suitable for food areas, schools,hospital, swimming pool areas, kitchens, dairies,breweries, dental and vet practices.

Key features and benefits• Contains a biocide to protect the dried coatingagainst fungal degradation• Good flow, filling and hiding power• Easy to apply• Durable coating

Sizes: 5LFinishes: SatinColour Range: BS4800, RAL, NCS and a range of

other manufacturers coloursWater Based

Also available in a 2-pack version which is extremelyhard wearing – Biosan Aqua Plus Hygienic.

Rust-Oleum 8300 Hygienic Wall PaintSingle pack hygienic topcoat protects against mildchemical exposure, occasional product spillage, frequentchemical cleaning, intermittent high humidity and moisture. For walls and ceilings.

Key features and benefits• Fast drying and recoating time• Offers protection against mild chemical exposure, occasional product spillage, frequentchemical cleaning, intermittent high humidityand moisture• Can be applied as low as 0°C; ideal forrefrigerated areas• Non-yellowing and resistant to frequent cleaning• Approved for direct food contact (R1)

Sizes: 5L & 20LFinishes: GlossColour Range: RAL1015 & RAL9010, other

colours on orders over 150LVinyl AcrylicWater Based


Bradite – CR27 – Road LineMarking PaintA quick drying, universal road marking and line paintsuitable for application on asphalt, concrete and brick,on roads, runways, car parks and sports facilities. Bradite CR27 Road Line Paint is made purely withchlorinated resin making it highly durable and waterresistant.

Key features and benefits• Good adhesion, surface dry in 10 minutes• Excellent abrasion resistance• No bleeding on asphalt or bitumen

Sizes: 5LFinishes: EggshellColour Range: BS4 and RALPrimary Uses A quick drying universal line

marking paint Chlorinated Resin Based

Bradite - CF22 Chlorinated RubberA high build gloss/eggshell, chlorinated rubber basedfinish. Suitable for use on concrete and steel non-ferrousmetals which are properly prepared and primed. Highlyresistant to chemicals and oils.

Key features and benefits• Resistant to fungal growth• Suitable for swimming pools• Can be used at low temperatures (0°C), waterimmersion – swimming pools etc. (Not suitablefor drinking water or fish ponds)

Sizes: 5LFinishes: EggshellColour Range: BS4 and RALPrimary Use Rubber based protective coatingWater Based

38 Sports & Safety

Sports & Safety 39

RustoleumTarmacoatA very fast-drying multi-purpose single pack floor paintfor exterior use. The product will cure sufficiently inapproximately 24 hours to accept light traffic (bicycle,car, etc.), but allow 48 hours before bringing the areaback into full use (heavy traffic; trucks etc)

Key features and benefits• Rain-proof and re-coatable after just one hour• Can be applied on slightly damp surfaces• Excellent resistance to U.V. and weathering• Water-based formulation, safe to use andvirtually no odour• Single pack, no mixing required

Sizes: 5LFinishes: MattColour Range: A selection of RAL colours

including English RedPrimary Uses Multi-purpose single pack

floor paint Exterior UseWater Based

Rustoleum Durable ConstructionLine Marking Paint - M1400Creates strong, durable, permanent lines. This solvent-based formula is especially designed for the rigorousdemands of construction, excavation, surveying,landscaping and other commercial operations.

Key features and benefits• Resistance to early fading and chalking• Excellent visibility on concrete, pavement, dirt,gravel, grass etc• Easy to apply - no messy tip adjustments,non-clogging, no cleaning required after use• Touch dry after 20 minutes

Sizes: 750ml AerosolColour Range: Six Standard ColoursInterior & Exterior UseSolvent Based


Coo-Var Low Odour LineMarking PaintLow odour line marking paint is a spirit based paintwhich can be applied directly to tarmac, sealedconcrete and wood. It is ideal for use in factories andschools where fast drying is a high priority.

Key features and benefits• Fast drying – touch dry in 30 minutes,hard dry in 4 hours• Single pack for interior and exterior use• Suitable for application on multi-surface• Ideal for colour code areas

Sizes: 2½L & 5LFinishes: MattColour Range: A selection of 4 colours,

Tile Red, Black, Yellow and WhiteInterior & Exterior UseSolvent Based

Rustoleum Hard Hat Marking PaintSpot marking paint for marking difficult surfaces.

Key features and benefits• Good opacity, weather resistant and watertight• For use on metal, concrete, asphalt, gravel, soil,grass, wood etc• Can be applied to slightly damp surfaces• Upside down spraying system

Sizes: 500ml AerosolFinishes: SatinColour Range: A selection of 3 colours,

Red/Orange,Yellow & WhiteExterior UseSolvent Based

40 Sports & SafetyFor specifications on larger


Sports & Safety 41

Coo-Var Anti-Climb PaintA thick, non drying (single pack) product of a stickynature. Helps protect property from intruders byproviding a slippery surface they cannot get a good gripon. Ideal for use on window ledges, down pipes, walls,gutters, garage roofs or anywhere which may be usedas a grip point.

Key features and benefits• Remains tacky• Leaves a coating on the intruder• Suitable for multi-surface, wood, metaland masonry

Sizes: 1L, 2½L, 5LFinishes: Semi-MattColour Range: A selection of 4 colours;

Tile Red, Black, Grey and GreenExterior Use

Coo-Var Tennis Court & Drive PaintA water based coating designed to provide colour onasphalt and tar based tennis courts. Also ideal fortarmac drives and paths.

Key features and benefits• Touch dry in 1 hour• Single pack

Sizes: 5L & 20LFinishes: MattColour Range: A selection of 3 colours;

Red, Black and GreenExterior UseSolvent Based


Milton Keynes

Stamford

MarketHarborough

BRAINTREE 01376 335999Century Drive, Braintree CM7 [email protected] | F: 01376 335990

BURY ST EDMUNDS 01284 762401Dettingen Way, Bury St Edmunds IP33 [email protected] | F: 01284 700202

CAMBRIDGE 01223 424267Unit 2 Kings Court, Kings Hedges Rd, Cambridge CB4 [email protected] | F: 01223 778002

CHELMSFORD 01245 26227921 Rodney Way, Widford Ind. Est, Chelmsford CM1 [email protected] | F: 01245 506035

COLCHESTER 01206 216000Layer Road, Colchester CO2 [email protected] | F: 01206 710257

FAKENHAM 01328 864713Clipbush Bus. Pk., Hawthorn Way, Fakenham NR21 [email protected] | F: 01328 258623

HUNTINGDON 01480 435731Stukeley Meadows Ind. Est., St Margarets Way, Huntingdon PE29 6EB [email protected] | F: 01480 420096

IPSWICH 01473 341330Trinity Street, Ipswich IP3 [email protected] | F: 01473 341338

CONNECT WITH USwww.kbcoatings.co.uk | @KentBlaxill | /KentBlaxill

KINGS LYNN 01553 771490Unit 1, Hansa Road, Kings Lynn, Norfolk PE30 [email protected] | F: 01553 762712

MARKET HARBOROUGH 01858 469980B1 Welland Bus. Pk, Valley Way, Market HarboroughLeicestershire LE16 [email protected] | F: 01858 467368

MELTON 01394 384255Wilford Bridge Spur, Melton, Woodbridge IP12 [email protected] | F: 01394 382312

MILTON KEYNES 01908 579824Unit 17, Erica Road, Stacey Bushes Trading Centre,Milton Keynes, Buckinghamshire MK12 [email protected] | F: 01908 417980

NORWICH 01603 62897315d Barker Street, City Trading Estate, Norwich NR2 [email protected] | F: 01603 667693

SAFFRON WALDEN 01799 5211501 Saffron Place, Shire Hill, Saffron Walden CB11 [email protected] | F: 01799 516271

STAMFORD 01780 7538221 Stamford Park, Ryhall Rd, Stamford, LINCS PE9 [email protected] | F: 01780 238123

SUDBURY 01787 372241Martins Rd, Chilton Ind. Est., Sudbury CO10 [email protected] | F: 01787 310960

buy protective coatings onlineat www.kbcoatings.co.uk

Kings Lynn

HuntingdonBury St. Edmunds

Fakenham

Norwich

IpswichMelton

Braintree

Sudbury

Colchester

We’ve got it covered...

Chelmsford

Saffron Walden

Cambridge

Andy Whitney07776 147649Sales Manager - Decorating

Colin Baxter07798 643113Territory Mgrfor Stamford,Cambridge, Buryand Huntingdon

Barry Church07798 643115Territory Mgrfor Norwich,Kings Lynn,Fakenham, Ipswichand Melton

Paul Boxall07776 258859Territory Mgrfor Milton Keynes& Market Harborough

Janine Scarff07584 504304Territory Mgrfor Sudbury,Braintree, SaffronWalden andChelmsford

Mandy Wells07814 67316101206 216017Territory Mgrfor Colchester

DanielleFogarty-Emerson Specialist CoatingsManager07535 857433

Danielle can provide technicaladvice, specifications and free sitevisits to provide the correctrecommendation for your project.The solution can be tailored tospecifically meet your requirementsand budget.

If you need specialist help callour specialist coatings manager

Luja high performance matt, thedurable coating for high traffic andhigh humidity areas.

Tikkurila Luja High Performance MattA high performance acrylic matt with mould and anti-microbial inhibitors,designed to provide an incredibly hard-wearing film, suitable for repeatedcleaning with hospital grade detergents.

Luja forms a moisture impervious film and has been designed for use in highhumidity environments such as food preparation facilities, swimming pools,distilleries, hospitals, clean rooms and other very high traffic environments.

Luja is also suitable for domestic dwellings and is ideal for bathrooms,kitchens and high traffic areas like hallways.

Available in 3 sheen level finishes; 7 – Matt, 20 – Semi-Matt, 40 – Semi-Gloss.

brush it, roll it, spray it - kent blaxill · 2019-01-10 · protective & specialist coatings...

Documents